The influences of added polysaccharides on the properties of bacterial crystalline nanocellulose

Coarse-grained molecular dynamics model to evaluate the mechanical properties of bacterial cellulose-hemicellulose composites

The plant cell wall (PCW) inspires the preparation of fiber-based biomaterials, particularly emphasizing exploiting the intrinsic interactions within the load-bearing cellulose and hemicellulose network. Due to experimental difficulties in studying and interpreting the interaction between these polysaccharides, this research presents a numerical model based on coarse-grained molecular dynamics that evaluates the mechanical properties of fiber composites. To validate the model and explain the structural and mechanical role of hemicelluloses, bacterial cellulose (BC) was synthesized in the presence of different concentrations of xylan, arabinoxylan, xyloglucan, or glucomannan and subjected to nano- and macroscale structural and mechanical characterization. The data obtained were used to interpret the effects of each hemicellulose on the mechanics of the BC-hemicellulose composite based on the sensitivity of the model. The mechanical properties of the resulting simulated networks agreed well with the experimental observations of the BC-hemicellulose composites. Increased xylan and arabinoxylan contents increased the macroscale mechanical properties, fiber modulus (xylan), and fiber width (arabinoxylan). The addition of xyloglucan increased the mechanical properties of the composites in the elastic deformation phase, associated with an increase in the fiber modulus. Adding glucomannan to the culture medium decreased all the mechanical properties studied while the fiber width increased.

Biosynthesis and characterization of antibacterial bacterial cellulose composite membrane composed of montmorillonite and exopolysaccharides

Bacterial cellulose (BC), as a natural renewable polymer material, has the advantages of porous nanonetwork structure, high degree of polymerization, high purity, high crystallinity, excellent mechanical properties and biocompatibility. However, BC lacks antibacterial properties, which leads to the limitation of BC material in food packaging and medical materials. In this study, a new antibacterial material using the combination of montmorillonite (MMT), BC and exopolysaccharides (EPS) produced by Weissella confusa H2 was synthesized. Fourier infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis showed that BC-EPS, BC-MMT and BC-EPS-MMT composite membranes conformed to the typical type I cellulose structure. Compared to BC membrane, scanning electron microscopy (SEM) showed that the porosity of BC-EPS, BC-MMT and BC-EPS-MMT composite membranes was low and compact. The physical properties of BC-EPS, BC-MTT and BC-EPS-MTT composite membranes showed lower water vapor transmittance. The BC-MTT and BC-EPS-MTT composite membranes exhibit a lower swelling ratio in 120 min. The thermal properties show that BC-EPS, BC-MTT and BC-EPS-MTT composite membranes have higher thermal stability (352 °C, 310 °C, 314 °C). Additionally, both BC-MMT and BC-EPS-MMT demonstrated strong inhibitory effects against various bacterial strains, including Staphylococcus aureus, Escherichia coli, Salmonella paratyphi A, and Bacillus subtilis. The exceptional properties exhibited by composite membranes establishes them as a highly promising option in the field of food packaging and medical material applications.

Improvement in bacterial cellulose production by co-culturing Bacillus cereus and Komagataeibacter xylinus

Bacterial cellulose (BC) is a bio-produced nanostructure material widely used in biomedical, food, and paper-manufacturing industries. However, low production efficiency and high-cost have limited its industrial applications. This study aimed to examine the level of improvement in BC production by co-culturing Bacillus cereus and Komagataeibacter xylinus. The BC yield in corn stover enzymatic hydrolysate was found to be obviously enhanced from 1.2 to 4.4 g/L after the aforementioned co-culturing. The evidence indicated that acetoin (AC) and 2,3-butanediol (2,3-BD) produced by B. cereus were the key factors dominating BC increment. The mechanism underlying BC increment was that AC and 2,3-BD increased the specific activity of AC dehydrogenase and the contents of adenosine triphosphate (ATP) and acetyl coenzyme A (acetyl-CoA), thus promoting the growth and energy level of K. xylinus. Meanwhile, the immobilization of BC could also facilitate oxygen acquisition in B. cereus under static conditions. This study was novel in reporting that the co-culture could effectively enhance BC production from the lignocellulosic enzymatic hydrolysate.

A Microbial Co-Culturing System for Producing Cellulose-Hyaluronic Acid Composites

In this study, a co-culture system combining bacterial cellulose (BC) producers and hyaluronic acid (HA) producers was developed for four different combinations. AAB of the genus Komagataeibacter sp. and LAB of the Lactocaseibacillus genus were used to produce BC and HA, respectively. Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction were used to investigate changes in BC-HA composites chemical and morphological structure. Water absorption, uptake, and antibacterial properties were also tested. Outcomes highlighted a higher bacterial cellulose yield and the incorporation of hyaluronic acid into the composite. The presence of hyaluronic acid increased fiber dimension-nearly doubled for some combinations-which led to a decreased crystallinity of the composites. Different results were observed based on the BC producer and HA producer combination. However, water holding capacity (WHC) in all the samples improved with the presence of HA, while water uptake worsened. A thymol-enriched BC-HA composite showed high antibacterial activity against Escherichia coli DSM 30083^T and Staphylococcus aureus DSM 20231^T. Results could contribute to opening new applications in the cosmetics or pharmaceutical fields.

Fabrication of bacterial cellulose composites with antimicrobial properties by in situ modification utilizing the specific function-suspension containing water-insoluble magnolol

In situ modification is commonly employed for Bacterial cellulose (BC) functionalization. However, water-insoluble modifiers are usually deposited at the bottom of the medium, therefore cannot be used for in situ modification of BC. Herein, a novel strategy for in situ modification of insoluble modifiers after suspension by a suspending agent was proposed. The BC-producing strain Kosakonia oryzendophytica FY-07, not Gluconacetobacter xylinus, was selected to prepare BC products with antibacterial activity because of its tolerance to natural antibacterial products. The experimental results showed that xanthan gum as a suspending agent can uniformly and stably disperse water-insoluble plant extracts magnolol in the culture medium to prepare the in situ modified BC products. Characterization of the properties showed that the in situ modified BC products have reduced crystallinity, significantly increased swelling ratio and strong inhibition on Gram-positive bacteria and fungi and weak inhibition on Gram-negative bacteria. Furthermore, the in situ modified BC products had no toxicity to cells. This study provided a feasible strategy for in situ modification of BC using water-insoluble modifiers to extend BC functionality and has significant implications for the biopolymer industry.

A Comparative Study of Mechanism and Performance of Anionic and Cationic Dialdehyde Nanocelluloses for Dye Adsorption and Separation

In this study, anionic dialdehyde cellulose (DAC) and cationic dialdehyde cellulose (c-DAC) nanofibrous adsorbents were prepared via a two-step reaction from bamboo pulp, using sodium periodate and Girard's reagent T as oxidizing and cationizing agents, respectively. The performance of DAC and c-DAC for selective dye adsorption and separation was evaluated by six different organic dyes (with varying charge properties) and certain binary mixtures. Both adsorbents could remove the dyes but with different capability, where DAC exhibited high adsorption efficiency against cationic dyes (e.g., the maximum adsorption capacity for Bismarck brown Y was 552.1 mg/g) and c-DAC exhibited high adsorption efficiency against anionic dyes (e.g., the maximum adsorption capacity for Congo red was 540.3 mg/g). To investigate the adsorption mechanism for these adsorbents, effects of contact time, initial pH value, initial dye concentration, and ionic strength on the adsorption activity against Congo red were investigated. The adsorption equilibrium data of DAC were found to fit best with the Langmuir isotherm model, whereas that of c-DAC were found to fit best with the Freundlich model. Both DAC and c-DAC adsorption kinetic data could be described by the pseudo-second-order kinetic model, and these adsorbents possessed stable adsorption efficiency in the pH range of 4-10. Furthermore, their dye adsorption capabilities were found to increase with increasing ionic strength (salt concentration). The distinctive complementary features of DAC and c-DAC will allow them to remove a wide range of organic dyes from industrial wastewater.

Enhancing thermal conductivity and chemical protection of bacterial cellulose/silver nanowires thin-film for high flexible electronic skin

Silver nanowires (AgNWs) thin films have emerged as a promising next-generation flexible electronic device. However, the current AgNWs thin films are often plagued by high AgNWs-AgNWs contact resistance and poor long-term stability. Here, to enhance the AgNWs stability on the surface of bacterial cellulose (BC), a novel flexible high conductivity thin-film was prepared by spin-coating a layer of polyvinyl alcohol (PVA) on the BC/AgNWs (BA) film. Firstly, BC film with high uniformity to better fit the AgNWs was obtained. It is observed that inadequately protected AgNWs can be corroded when AgNWs together with PVA were attached to the BC surface (BAP film), Yet, a layer of PVA was spin-coated on the surface of BA film, the BC/AgNWs/spin-coated 0.5 % PVA (BASP) thin-film (10.1 μm) exhibits that the PVA interfacial protective layer effectively mitigated the intrinsic incompatibility of BC with AgNWs as well as external corrosion (Na₂S for 3 h) and immobilization of AgNWs, thus having a low conductive sheet resistance of 0.42 Ω/sq., which was better than most of the AgNWs-containing conductive materials reported so far. In addition, the resistance of the BASP thin-film changed little after 10,000 bending cycles, and the conductivity remained stable over BC directly immersed in 0.5 % PVA/AgNWs. This "soft" conductive material can be used to manufacture a new generation of electronic skin.

Nanoengineering and green chemistry-oriented strategies toward nanocelluloses for protein sensing

As one of the most important functional organic macromolecules of life, proteins not only participate in the cell metabolism and gene regulation, they also earnestly protect the body's immunity system, leading to a powerful biological shield and homeostasis. Advances in nanomaterials are boosting the significant progress in various applications, including the sensing and examination of proteins in trace amount. Nanocellulose-oriented protein sensing is at the forefront of this revolution. The inherent feature of high biocompatibility, low cytotoxicity, high specific area, good durability and marketability endow nanocellulose with great superiority in protein sensing. Here, we highlight the recent progress of protein sensing using nanocellulose as the biosensor in trace amount. Besides, various kinds of construction strategies for nanocelluloses-based biosensors are discussed in detail, to enhance the agility and accuracy of clinical/medical diagnostics. Finally, several challenges in the approbatory identification of new approaches for the marketization of biomedical sensing that need further expedition in the future are highlighted.

Nanocellulose for Sustainable Water Purification

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Highly efficient production of bacterial cellulose from corn stover total hydrolysate by Enterobacter sp. FY-07

Bacterial cellulose (BC) has a huge global market due to its excellent properties and wide range of applications. However, due to high production costs, low productivity, and unsatisfactory scale-up production, industrialisation has been slow. Herein, stabilization of strain, optimisation of culture conditions, and a cheap carbon source were combined to achieve highly efficient, low-cost, large-scale BC production in 20 L containers. Optimisation of culture conditions increased both BC productivity and sugar conversion ratio significantly, from 2.08 g/L/day and 9.78% to 17.13 g/L/day and 70.31%, respectively. Furthermore, BC productivity and sugar conversion ratio reached 13.96 g/L/day and 85.50% using corn stover total hydrolysate as carbon source. The low-cost, facile, and highly efficient process can generate large quantities of BC, and could promote industrialisation of BC production.

Probiotic cellulose: Antibiotic-free biomaterials with enhanced antibacterial activity

The alarming increase of antibiotic-resistant bacteria, causing conventional treatments of bacterial infections to become increasingly inefficient, is one of the biggest threats to global health. Here, we have developed probiotic cellulose, an antibiotic-free biomaterial for the treatment of severe skin infections and chronic wounds. This composite biomaterial was in-depth characterized by Gram stain, scanning electron microscopy (SEM) and confocal fluorescence microscopy. Results demonstrated that probiotic cellulose consists of dense films of cellulose nanofibers, free of cellulose-producing bacteria, completely invaded by live probiotics (Lactobacillus fermentum or Lactobacillus gasseri). Viability assays, including time evolution of pH and reducing capacity against electrochromic polyoxometalate, confirmed that probiotics within the cellulose matrix are not only alive but also metabolically active, a key point for the use of probiotic cellulose as an antibiotic-free antibacterial biomaterial. Antibacterial assays in pathogen-favorable media, a real-life infection scenario, demonstrated that probiotic cellulose strongly reduces the viability of Staphylococcus aureus (SA) and Pseudomonas aeruginosa (PA), the most active pathogens in severe skin infections and chronic wounds. Likewise, probiotic cellulose was also found to be effective to inhibit the proliferation of methicillin-resistant SA (MRSA). The combination of the properties of bacterial cellulose as wound dressing biomaterial and the antibacterial activity of probiotics makes probiotic cellulose an alternative to antibiotics for the treatment of topical infections, including severe and hard-to-heal chronic wounds. In addition, probiotic cellulose was obtained by a one-pot synthetic approach under mild conditions, not requiring the long and expensive chemical treatments to purify the genuine bacterial cellulose.

Soybean hulls: Optimization of the pulping and bleaching processes and carboxymethyl cellulose synthesis

Soybean hulls, a co-product generated in high volumes, were used to obtain pulp and CMC. The pulping process was optimized with the aid of 1%, 2%, and 2.5% NaOH solutions at 90 °C for 2 h. A 22 central composite design was used in order to optimize the bleaching process and the CMC synthesis. Volumes of bleaching solution (VS) of between 55 and 65 mL/g at temperatures between 85 and 95 °C and VS of 70 and 75 mL/g at 95 °C were applied in the pulp bleaching process. The factors considered in the carboxymethylation were the chloroacetic acid mass (1.2-2.1 g/g) and the reaction time (192-228 min), at 63 °C. The soybean hulls contain 40.62% of cellulose and have a low lignin content. The pulping process was optimized when 1% NaOH was used at 90 °C/2 h and bleaching process applying VS = 75 mL at 95 °C/4 h. The pulps showed low lignin content (<6%) and the cellulose had a high degree of crystallinity. The SEM, 1H NMR, XRD, FTIR and TGA/DTG analysis results demonstrated that it is possible to synthesize CMC (DS = 1.45) by acetylating the bleached pulp with 2.1 g of chloroacetic acid for 192 min, at 63 °C.

Waste paper: An underutilized but promising source for nanocellulose mining

Nanocellulose has achieved an inimitable place and value in nano-materials research sector. Promising and exclusive physical, chemical and biological properties of nanocellulose make it an attractive and ideal material for various high end-user applications. Conventionally, the base material for nanocellulose i.e. cellulose is being extracted from various lignocellulosic raw materials (like wood, agro-industrial-residues, etc.) using pulping followed by bleaching sequences. As an alternate to lignocellulosic raw materials, waste paper also showed potential as a competent raw material due to its abundant availability and high cellulosic content (60-70%) with comparatively less hemicelluloses (10-20%) and lignin (5-10%) without any harsh treatments. The production yields of nanocellulose were reported to vary from 1.5% to 64% depending upon the waste papers and treatments given. The diameters of these nanocelluloses were reported in the range of 2-100 nm and crystallinity range around 54-95%. Thermal degradation of waste paper nanocellulose was varied from 187 °C to 371 °C. Although these properties are comparable with the nanocellulose obtained from lignocellulosic raw materials, yet waste paper is an underutilized source for nanocellulose preparation due to its ordinary fate of recycling, dumping and incineration. In the sight of necessity and possibility of waste paper utilization, this article reviews the outcomes of research carried out for preparation of nanocellulose using waste paper as a source of cellulose. There is a need of sincere investigation to convert this valuable waste to wealth i.e. waste papers to nanocellulose, which will be helpful in solid waste management to protect environment in economical way.

Development of antioxidant chitosan film with banana peels extract and its application as coating in maintaining the storage quality of apple

In the present study, the antioxidant chitosan (CS)-banana peels extract (BPE) composite film was developed. The different content of BPE (4%, 8% and 12%) was added to the CS film not only as the antioxidant but also as the cross-linking. The CS, CS-4% BPE, CS-8% BPE and CS-12% BPE films were characterized by scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD) and thermogravimetric analysis (TGA). The physical and mechanical properties possessed by the CS and CS-BPE films were compared as well, and the CS-4 %BPE composite film exhibited the most excellent properties. The decline in moisture contents, water solubility and water vapor permeability of CS-BPE composite film indicated the reduced hydrophilicity. Moreover, the CS-BPE composite film exhibited excellent antioxidant activity in different food simulants. Finally, the optimal concentration of CS-BPE coating treatment was identified and applied to apple fruit, and the results showed that CS-BPE coating was more capable of improving the postharvest quality of apple fruit than CS coating. This study evidences the promising nature of CS-BPE composite film and coating as a desirable alternative for active packaging and it is believed as conducive to valorization of banana peel by-products for allied applications.

Bacterial cellulose/hyaluronic acid nanocomposites production through co-culturing Gluconacetobacter hansenii and Lactococcus lactis in a two-vessel circulating system

Bacterial cellulose (BC) based composites have been widely studied in the biomedical field. In this study, the BC/HA (hyaluronic acid) nanocomposites in the pellicle form were directly produced through co-culturing Gluconacetobacter hansenii ATCC 23769 and Lactococcus lactis APJ3 in a novel two-vessel circulating system. The concentration of HA secreted by L. lactis was controlled through adjusting the constant feed rate of glucose. The dynamic growth of the strains revealed that L. lactis was mainly growing within 48 h while G. hansenii started to grow after 48 h. XRD analysis indicated the presence of HA would not affect the crystallinity of cellulose but increase the crystalline sizes. The FESEM images showed that more ribbons within the width of 20-40 nm and larger ribbons between 180 and 360 nm were observed in BC/HA. The strain at break and the water holding capacity of BC/HA increased with the concentration of HA.

Enhanced mechanical properties of bacterial cellulose nanocomposites produced by co-culturing Gluconacetobacter hansenii and Escherichia coli under static conditions

Including additives in the culture media during bacterial cellulose (BC) biosynthesis is a traditional method to produce BC-based nanocomposites. This study examines a novel fermentation process, which is to co-culture Gluconacetobacter hansenii (G. hansenii) with Escherichia coli (E. coli) under static conditions, to produce BC pellicles with enhanced mechanical properties. The mannose-rich exopolysaccharides (EPS) synthesized by E. coli were incorporated into the BC network and affected the aggregation of co-crystallized microfibrils without significantly changing the crystal sizes of BC. When co-culturing G. hansenii ATCC 23769 with E. coli ATCC 700728, which produced a low concentration of EPS at 3.3 ± 0.7 mg/L, the BC pellicles exhibited a Young's modulus of 4,874 ± 1144 MPa and a stress at break of 80.7 ± 21.1 MPa, which are 81.9% and 79.3% higher than those of pure BC, respectively. The growth dynamics of the two co-cultured strains suggested that the production of BC and EPS were enhanced through co-culturing fermentation.

Mechanical and Water-Resistant Properties of Eco-Friendly Chitosan Membrane Reinforced with Cellulose Nanocrystals

Environmentally benign and biodegradable chitosan (CS) membranes have disadvantages such as low mechanical strength, high brittleness, poor heat resistance and poor water resistance, which limit their applications. In this paper, home-made cellulose nanocrystals (CNC) were added to CS to prepare CNC/CS composite membranes through mechanical mixing and solution casting approaches. The effects of CNC dispersion patterns and CNC contents on the properties of composite membranes were studied. The analysis of the surface and cross-section morphology of the membranes showed that the dispersion performance of the composite membrane was better in the case that CNC was dissolved in an acetic acid solution and then mixed with chitosan by a homogenizer (Method 2). CNC had a great length-diameter ratio and CNC intensely interacted with CS. The mechanical properties of the composite membrane prepared with Method 2 were better. With a CNC content of 3%, the tensile strength of the composite membrane reached 43.0 MPa, 13.2% higher than that of the CNC-free membrane. The elongation at break was 41.6%, 56.4% higher than that of the CNC-free membrane. Thermogravimetric, contact angle and swelling analysis results showed that the addition of CNC could improve the heat and water resistance of the chitosan membrane.