A new Schiff-base chemosensor for selective detection of Cu2+ and Co2+ and its copper complex for colorimetric sensing of S2- in aqueous solution

Chelation therapy-inspired design of a water-stable fluorescent probe for the effectual monitoring of copper(II) ions in real water

This work introduces a thought-provoking design to develop a water-soluble chemical probe, sodium 4-hydroxy-3-((E)-((E)-((2-hydroxynaphthalen-1yl)methylene)hydrazono)methyl) benzenesulfonate (SW2) and its analytical characterization for the efficient detection and monitoring of Cu2+ ions in a matrix of s-, d-, and f-metal ions in pure water. The water-stable molecular probe, SW2, in the presence of Cu2+ salts in pure water exhibits a fluorescence turn-off characteristic with a high detection limit, 3.8 μM, and irresistibly holds 4-cycle reversibility in the presence of sulphide ions without any significant loss of its chemosensing efficiency. Spectroscopic and computational studies ensure 1 : 1 complexation between SW2 and Cu2+ ions, leading to the formation of SW2-Cu2+ chelate, thus inducing dynamic quenching of SW2 emission, which subsequently reverts on the addition of S2- ions in water. Additionally, the SW2-Cu2+ chelate was isolated in microcrystalline powder and the complexation was studied with mass spectrometry and EPR analysis. Computational analysis reveals the remarkable reduction in the S0-S1 energy level of the SW2-Cu2+ complex, which is attributed to the drastic quenching of the fluorescence intensity. Furthermore, SW2 was successfully applied to the detection of Cu2+ ions in tap and pond water. Interestingly, the probe is also effective for the determination of Cu2+ ions in the aqueous solution of a Cu-based fungicide (copper oxychloride), commercially available as Blitox in India, thus evaluating the effectiveness of SW2 in real sample analysis.

A water-soluble colorimetric chemosensor for sequential probing of Cu2+ and S2- and its practical applications to test strips, reversible test, and water samples

A water-soluble colorimetric chemosensor NHOP ((E)-1-(2-(2-(2-hydroxy-5-nitrobenzylidene)hydrazineyl)-2-oxoethyl)pyridin-1-ium) chloride) was developed for the sequential probing of Cu2+ and S2-. NHOP underwent a color change from pale yellow to colorless in the presence of Cu2+ in pure water. The binding ratio between NHOP and Cu2+ was confirmed to be 1:1 by the Job plot and ESI-MS (electrospray ionization mass spectrometry). The detection limit of NHOP for Cu2+ was calculated as 0.15 μM, which was far below the EPA (Environmental Protection Agency) standard (20 μM). The NHOP-coated test strip was able to easily monitor Cu2+ in real-time. Meanwhile, the NHOP-Cu2+ complex reverted from colorless to pale yellow in the presence of S2- through the demetallation. The stoichiometric ratio between NHOP-Cu2+ and S2- was determined to be 1:1 by analyzing the Job plot and ESI-MS. The detection limit of NHOP-Cu2+ for S2- was calculated as 0.29 μM, which was very below the WHO (World Health Organization) guideline (14.7 μM). NHOP successfully achieved the quantification for Cu2+ and S2- in water samples. NHOP could work as a sequential probe for Cu2+ and S2- at the biological pH range (7.0-8.4). Moreover, NHOP could successively probe Cu2+ and S2- at least three cycles because of its reversible property. The detection mechanisms of NHOP for Cu2+ and NHOP-Cu2+ for S2- were demonstrated with Job plot, ESI-MS, and DFT (density functional theory) calculations. Therefore, NHOP could work as an efficient sequential probe for Cu2+ and S2- in environmental systems.

Dual-mode fluorescence and colorimetric sensing of sulfide anion in natural water based on near-infrared Ag2S quantum dots and MnO2 nanosheets complex

Near infrared (NIR) emission Ag2S quantum dots (QDs) are of great value for biochemical sensing with strong anti-interference and low toxicity. Herein, NIR fluorescence Ag2S QDs were synthesized successfully. Combined with the excellent oxidase-like characteristics of manganese dioxide (MnO2) nanosheets, a fluorescence and colorimetric dual-mode sensor for sulfide anion was developed. MnO2 nanosheets could effectively catalyze the oxidation of TMB to produce blue TMB oxide (ox TMB), at the same time, the fluorescence of Ag2S QDs could be effectively quenched by fluorescence internal filtration effect (IFE) and dynamic quenching effect. The enzyme-like activity was weakened and the NIR fluorescence of Ag2S QDs was restored when sulfide anion (S2-) was added, due to the reduction of MnO2 to Mn2+.The linear ranges for fluorescence and colorimetric analysis of S2- were 2-250 μM and 0.3-50 μM, with detection limits of 0.6 and 0.215 μM, correspondingly. The dual-mode sensor had a wider detection range, higher sensitivity and shorter reaction time, which could be used for highly selective detection of S2- in different concentration ranges. In addition, it had been successfully applied to the determination of sulfide in water samples with satisfactory accuracy and sensitivity.

An NBD-based fluorescent and colorimetric chemosensor for detecting S2-: Practical application to zebrafish and water samples

A novel 7-nitro-1,2,3-benzoxadiazole (NBD)-based chemosensor BOP ((5-bromopyridin-2-yl)(4-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)piperazin-1-yl)methanone) was synthesized. BOP could detect S^2- through fluorescent quenching and colorimetric change. The detection limit was calculated to be 10.9 µM through fluorescence titration. The reaction mechanism of BOP towards S^2- was estimated to be thiolysis of NBD amine, producing the cleavage products, NBD-S^- and BP ((5-bromopyridin-2-yl)(piperazin-1-yl)methanone). The thiolysis was demonstrated by ¹H NMR titrations, ESI-mass analysis and theoretical calculations. Importantly, BOP was able to successfully monitor S^2- in zebrafish and water samples. Additionally, test strips coated with BOP were applied to the in-the-field measurements of S^2-.

A Review on Recent Progress in Organic Fluorimetric and Colorimetric Chemosensors for the Detection of Cr3+/6+Ions

Chromium occurs in the environment primarily in two valence states, trivalent Cr3+ and hexavalent Cr6+, which have different physicochemical and biochemical properties. However, the higher concentration of Cr3+/6+ can cause various adverse effects on human health. Therefore, detecting Cr3+/6+ ions is important in various samples. Colorimetric and fluorescent chemosensors are the most powerful tools for the detection of Cr3+/6+ ions. These chemosensors have excellent bioimaging capability and significant sensitivity and selectivity. In this article, different colorimetric and fluorescent chemosensors based on organic compounds, including Schiff base, antipyrine, diarylethene, pyrene, crown ether, dansyl, pyridine, thiazole, coumarin, boradiazaindacene, rhodamine, imidazole, hydrazone, and other functional groups for detection of Cr3+/6+ ions have been reviewed, classified them according to different fluorophore and recognition mode. I hope this article will help the readers for the future design of highly effective, sensitive, and selective chemosensors for the detection and determination of Cr3+/6+ ions.

Real time sensor for Fe3+, Al3+, Cu2+ & PPi through quadruple mechanistic pathways using a novel dipodal quinoline-based molecular probe

A quinoline-based small molecular probe, H₂L was designed, synthesized and characterized by different spectroscopic methods. It was utilized as a multi-responsive probe for the detection of Fe³⁺, Al³⁺, Cu²⁺ and PPi. It showed very selective instant turn-on fluorimetric response towards Fe³⁺and Al³⁺ with a detection limit in nanomolar range. Solutions of H₂L containing Fe³⁺ or Al³⁺ could sequentially sense PPi by a turn-off mechanism. Also, H₂L could determine the presence of Cu²⁺ very selectively among a series of other metal ions by a sharp change in colour. Detection of Cu²⁺ through colorimetry was further investigated by systematic UV-Vis studies and the potential of H₂L to act as a potential colorimetric sensor for Cu²⁺ was suitably established. Filter-paper strip experiments were conducted to demonstrate the practical utility of the proposed sensor. Potential applications of H₂L as a sensor for pH in the acidic range has also been explored.

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

A Novel Thiosemicarbazide-Based Fluorescent Chemosensor for Hypochlorite in Near-Perfect Aqueous Solution and Zebrafish

A novel thiosemicarbazide-based fluorescent sensor (AFC) was developed. It was successfully applied to detect hypochlorite (ClO−) with fluorescence quenching in bis-tris buffer. The limit of detection of AFC for ClO− was analyzed to be 58.7 μM. Importantly, AFC could be employed as an efficient and practical fluorescent sensor for ClO− in water sample and zebrafish. Moreover, AFC showed a marked selectivity to ClO− over varied competitive analytes with reactive oxygen species. The detection process of AFC to ClO− was illustrated by UV–visible and fluorescent spectroscopy and electrospray ionization–mass spectrometry (ESI–MS).

A novel imidazole derived colorimetric and fluorometric chemosensor for bifunctional detection of copper (II) and sulphide ions in environmental water samples

Herein, a novel "ON-OFF" colorimetric and fluorometric chemosensor; 1N-allyl-2-(2, 5-dimethoxyphenyl)-4, 5-diphenyl-1H-imidazole (ADPPI), was constructed for sequential determination of Cu²⁺ and S^2- ions in aqueous media. The interaction between chemosensor ADPPI and different metal cations was investigated using UV-VIS and fluorimetric spectroscopy. ADPPI showed a favorable and good interaction with Cu²⁺ ions producing blue colored solution peaked at 610 nm with blue fluorescence at λ_em. = 447 nm. The produced complex between Cu²⁺ ions and ADPPI can be used as a cascade probe for detection of S^2- ions. The detection limits (LODs) were 1.01 nM and 1.25 μM for Cu²⁺ and S^2- ions, respectively (the lowest between the family of colorimetric and fluorometric chemosensors). To further increase the applicability of the proposed method, Cu²⁺ and S^2- ions concentrations were measured in environmental water samples.

Hydrazone Based Dual - Responsive Colorimetric and Ratiometric Chemosensor for the Detection of Cu2+/F- Ions: DNA Tracking, Practical Performance in Environmental Samples and Tooth Paste

Colorimetric sensors have attracted wide scope of attentions due to its fascinating advantages, like handy, equipment-free and naked eye detections. In this investigation, a new and novel hydrazone based dual-responsive ratiometric/colorimetric chemosensor have been developed for highly selective and sensitive detection of Cu²⁺ and F^- ions in dimethyl sulfoxide (DMSO) solvent. The probe showed highly selective sensing towards Cu²⁺ and F^- ions by exhibiting a color change from pale yellow to yellowish green and pale yellow to yellowish brown respectively., in DMSO without any interference of other ions at same concentration. These experimental results have also substantiated by the NMR, HR-MS, UV-Vis spectroscopic, cyclic voltammetry, differential pulse voltammetry techniques and DFT calculations. The detection limits are found to be 5.8 μM for Cu²⁺ and 0.025 μM for F^- ions which is far below to the values recommended by WHO. The stoichiometric ratios between NAPCBH and Cu2+/ F- ions were confirmed from the Job's plots and ¹H NMR titration experiments which are found to be 2:1 and 1:1 respectively. The tracking ability of the DNA with NAPCBH-Cu²⁺ was studied by UV-Vis titration and Cyclic voltammetry measurements. It shows efficient affinity towards DNA with NAPCBH-Cu²⁺. The probe can also quantitatively determine the Copper and fluoride ions present in environmental samples & toothpaste. The NAPCBH was promptly recovered by utilizing very low concentration of HCl, showing that was found feasible and re-usable sensor for the convenient detection of Cu²⁺ and F^- ions. Graphical Abstract.

Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+

N’-(5-nitro-2-oxoindolin-3-ylidene) thiophene-2-carbohydrazide (NH) was successfully synthesized as a ligand, then grafted onto the surface of mesoporous silica SBA-15via an aminopropyl bridge. The successful grafting of ligand NH onto the hybrid nanomaterial (SBA-15/APTES-NH) was confirmed by infrared spectroscopy. On excitation at 276 and 370 nm, the ligand NH and the hybrid nanomaterial SBA-15/APTES-NH showed a strong and narrow emission peak centered at 533 nm. By dispersing SBA-15/APTES-NH in an aqueous solution containing metal ions, the resulting solid materials showed a higher binding of NH sensing site to Fe3+ ions as compared to the others with a quench of the emission intensity up to 84%. This result showed that the hybrid nanomaterial is a potential chemosensor that requires development for the detection of metal ions.

Cost-effective approach to detect Cu(ii) and Hg(ii) by integrating a smartphone with the colorimetric response from a NBD-benzimidazole based dyad

A new optical chemosensor N1 was designed and synthesized by condensing 4-chloro-7-nitrobenzofurazan with 2-aminophenylbenzimidazole. In CH₃OH : H₂O (1 : 1, v/v) medium, sensor N1 exhibited high selectivity and sensitivity towards Cu²⁺ and Hg²⁺ ions by showing a distinct colour change from pale yellow to pink due to the internal charge transfer occurring between the sensor N1 and the Cu²⁺/Hg²⁺ ions upon complexation in 1 : 1 stoichiometry.

Exploring the hidden potential of a methoxy substituted HBT derivative as an efficient example of coupling of AIE and ESIPT processes and as an energy harvesting platform

A methoxy substituted HBT derivative 2-(benzo[d]thiazol-2-yl)-6-methoxyphenol (TMP) showed coupling of AIE and ESIPT, underwent FRET with Rhodamine B and detected Sulfide in pure water by ratiometry.

A hydrazono-quinoline-based chemosensor sensing In3+ and Zn2+via fluorescence turn-on and ClO−via color change in aqueous solution

A multi-target sensor, based on hydrazono-quinoline, was developed for fluorescence turn-on detection of In³⁺ and Zn²⁺ and colorimetric detection of ClO⁻.

Liquid Cladding Mediated Optical Fiber Sensors for Copper Ion Detection

We present a label-free optical fiber based sensor device to detect copper ions (Cu2+) in water. A multimode optical fiber, with its polymer cladding removed along a 1-cm length, is used for the optical sensor head, where the injected Cu2+ in the liquid phase acts as a liquid cladding for the optical mode. The various Cu2+ concentrations modulate the numerical aperture (NA) of the liquid cladding waveguide part. The degree of NA mismatch between the liquid cladding and solid cladding guided parts gives rise to an optical power transmittance change, forming the sensing principle. The presented liquid cladding fiber sensor exhibits a minimum resolvable refractive index of 2.48 × 10-6. For Cu2+ detection, we functionalize the sensor head surface (fiber core) using chitosan conjugated ethylenediaminetetraacetic acid (EDTA) which captures Cu2+ effectively due to the enhanced chelating effects. We obtain a limit of detection of Cu2+ of 1.62 nM (104 ppt), which is significantly lower than the tolerable level in drinking water (~30 µM), and achieve a dynamic range of 1 mM. The simple structure of the sensor head and the sensing system ensures the potential capability of being miniaturized. This may allow for in-situ, highly-sensitive, heavy metal sensors in a compact format.

A multi-functional chemosensor for highly selective ratiometric fluorescent detection of silver(I) ion and dual turn-on fluorescent and colorimetric detection of sulfide

A multi-functional chemosensor 1 as silver and sulfide detector was synthesized by the combination of octopamine and 4-dimethylaminocinnamaldehyde. Sensor 1 exhibited a ratiometric fluorescence emission for Ag+ from blue to sky. The binding mode of 1 and Ag+ turned out to be a 1 : 1 ratio as determined using Job plot and electrospray ionization (ESI) mass spectral analyses. The sensing mechanism of 1 with silver ion was unravelled by 1H NMR titrations and theoretical calculations. Sensor 1 also discerned sulfide by enhancing fluorescence intensity and changing colour from yellow to colourless in aqueous solution. The sensing properties of 1 toward S2- were investigated by using ESI-mass analysis, Job plot and 1H NMR titrations. Moreover, 1 could be used as a detector for sulfide in a wide pH range.

Dual responsive salen-type Schiff bases for the effective detection of l-arginine via a static quenching mechanism

The effect of substituents of salen Schiff bases on the detection of l-arginine via a static quenching mechanism is discussed.

Colorimetric detection of iron and fluorescence detection of zinc and cadmium by a chemosensor containing a bio-friendly octopamine

A chemosensor containing a bio-friendly octopamine was developed for the colorimetric detection of iron and fluorescence detection of zinc and cadmium.