A Concise Review on Effect of PEGylation on the Properties of Lipid-Based Nanoparticles

Nanoparticle-based drug delivery systems have emerged as promising platforms for enhancing therapeutic efficacy while minimizing off-target effects. Among various strategies employed to optimize these systems, polyethylene glycol (PEG) modification, known as PEGylation-the covalent attachment of PEG to nanoparticles, has gained considerable attention for its ability to impart stealth properties to nanoparticles while also extending circulation time and improving biocompatibility. PEGylation extends to different drug delivery systems, in specific, nanoparticles for targeting cancer cells, where the concentration of drug in the cancer cells is improved by virtue of PEGylation. The primary challenge linked to PEGylation lies in its confirmation. Numerous research findings provide comprehensive insights into selecting PEG for various PEGylation methods. In this review, we have endeavored to consolidate the outcomes concerning the choice of PEG and diverse PEGylation techniques.

Hydrolysis of hydrophobic poly(2-oxazoline)s and their subsequent modification via aza-Michael addition

Partially hydrolysed poly(2-oxazoline)s possess unique properties. However, much of the focus in this area has been on water soluble poly(2-oxazoline)s. Where hydrophobic poly(2-oxazoline)s have been used, this is often for selective hydrolysis. However, hydrolysis of very hydrophobic polymers could lead to interesting solution behaviour. Herein, we describe universal conditions for the hydrolysis of poly(2-alkyl-2-oxazoline)s suitable for both hydrophobic and hydrophilic 2-oxazolines. We show that the system utilised gives comparable rates to that of water alone for poly(2-ethyl-2-oxazoline). In addition, poly(2-fatty acid-2-oxazoline) was hydrolysed using the developed system and was found to proceed in a controlled manner allowing the targeting of specific degrees of hydrolysis, albeit much slower than for poly(2-ethyl-2-oxazoline). Finally, we demonstrate the partial functionalisation of poly(2-oxazoline)-poly(ethylene imine) co-polymers via aza-Michael addition.

Globular Proteins and Where to Find Them within a Polymer Brush-A Case Study

Protein adsorption by polymerized surfaces is an interdisciplinary topic that has been approached in many ways, leading to a plethora of theoretical, numerical and experimental insight. There is a wide variety of models trying to accurately capture the essence of adsorption and its effect on the conformations of proteins and polymers. However, atomistic simulations are case-specific and computationally demanding. Here, we explore universal aspects of the dynamics of protein adsorption through a coarse-grained (CG) model, that allows us to explore the effects of various design parameters. To this end, we adopt the hydrophobic-polar (HP) model for proteins, place them uniformly at the upper bound of a CG polymer brush whose multibead-spring chains are tethered to a solid implicit wall. We find that the most crucial factor affecting the adsorption efficiency appears to be the polymer grafting density, while the size of the protein and its hydrophobicity ratio come also into play. We discuss the roles of ligands and attractive tethering surfaces to the primary adsorption as well as secondary and ternary adsorption in the presence of attractive (towards the hydrophilic part of the protein) beads along varying spots of the backbone of the polymer chains. The percentage and rate of adsorption, density profiles and the shapes of the proteins, alongside with the respective potential of mean force are recorded to compare the various scenarios during protein adsorption.

On-line preconcentration and determination of sulfadiazine in food samples using surface molecularly imprinted polymer coating by capillary electrophoresis

In this study, on-line preconcentration and selective determination of the trace sulfadiazine (SDZ) existing in milk and hen egg white samples were realized by the capillary electrophoresis using molecularly imprinted polymer (MIP) coated capillary. The capillary coated with MIP was firstly prepared through the surface imprinted techniques, using SDZ as template molecule and dopamine as function monomer and crosslinker, and then amine-terminated poly(2-methyl-2-oxazoline) (PMOXA-NH₂) was introduced onto polydopamine layer to reduce the non-specific adsorption. Successful preparation of SDZ-MIP-PMOXA coating was verified by zeta potential, as well as water contact angle. The SDZ-MIP-PMOXA coated capillary performed well on-line preconcentration of SDZ and the obtained peak area of SDZ was 46 times higher than that one obtained in bare capillary using the same procedure. Then the proposed on-line preconcentration method was fully validated and displayed good linear behavior in the concentration from 5.0 to 100.0 ng/mL, with the limit of detection was low to 1.5 ng/mL; and this method presented excellent accuracy and robustness. The prepared SDZ-MIP-PMOXA coated capillary also showed high selectivity with the imprinting factor of 5.85 and good repeatability during five consecutive runs with the relative standard deviation value of peak area was 1.6%. At last, the application of the prepared SDZ-MIP-PMOXA coated capillary in the detection of SDZ in spiked food samples was investigated, and good recoveries of 98.7-109.3% were obtained.

Synthesis and Characterization of Spirocyclic Mid-Block Containing Triblock Copolymer

Polymers containing cyclic derivatives are a new class of macromolecular topologies with unique properties. Herein, we report the synthesis of a triblock copolymer containing a spirocyclic mid-block. To achieve this, a spirocyclic polystyrene (cPS) mid-block was first synthesized by atom transfer radical polymerization (ATRP) using a tetra-functional initiator, followed by end-group azidation and a copper (I)-catalyzed azide-alkyne cycloaddition reaction. The resulting functional cPS was purified using liquid chromatography techniques. Following the esterification of cPS, a macro-ATRP initiator was obtained and used to synthesize a poly (methyl methacrylate)-block-cPS-block-poly (methyl methacrylate) (PMMA-b-cPS-b-PMMA) triblock copolymer. This work provides a synthetic strategy for the preparation of a spirocyclic macroinitiator for the ATRP technique and as well as liquid chromatographic techniques for the purification of (spiro) cyclic polymers.

Polymer brushes for friction control: Contributions of molecular simulations

When polymer chains are grafted to solid surfaces at sufficiently high density, they form brushes that can modify the surface properties. In particular, polymer brushes are increasingly being used to reduce friction in water-lubricated systems close to the very low levels found in natural systems, such as synovial joints. New types of polymer brush are continually being developed to improve with lower friction and adhesion, as well as higher load-bearing capacities. To complement experimental studies, molecular simulations are increasingly being used to help to understand how polymer brushes reduce friction. In this paper, we review how molecular simulations of polymer brush friction have progressed from very simple coarse-grained models toward more detailed models that can capture the effects of brush topology and chemistry as well as electrostatic interactions for polyelectrolyte brushes. We pay particular attention to studies that have attempted to match experimental friction data of polymer brush bilayers to results obtained using molecular simulations. We also critically look at the remaining challenges and key limitations to overcome and propose future modifications that could potentially improve agreement with experimental studies, thus enabling molecular simulations to be used predictively to modify the brush structure for optimal friction reduction.

Hydrophilic Polymer-Guided Polycatecholamine Assembly and Surface Deposition

Mussel-inspired surface chemistry based on polycatecholamines and polyphenols has been widely applied as a facile and universal method for modifying surfaces. Specifically, the catecholamine-assisted codeposition as a one-step strategy is a versatile strategy used to impart surface functionalities. Despite successful incorporation of numerous functional agents, very little understanding has emerged over the years regarding the mechanism behind their coassembly and codeposition. Here, we employed six different ultrahigh molecular weight hydrophilic polymers of diverse chemistry and architecture and three catecholamines and a polyphenol for investigating the coassembly and codeposition process. The chemistry of the polymers is found to influence the strength of the interaction between the polycatecholamine and the hydrophilic polymers, thus playing an important role in the aqueous self-assembly in solution to nanoaggregates, its formation kinetics, steric stabilization, and surface deposition. Additionally, the codeposition method was used as a platform for developing antifouling and antibiofilm coatings and evaluating their efficiency. Both the chemistry of hydrophilic polymers and the type of the catecholamine influence the antibiofilm properties of the coating. Our studies demonstrated that significant opportunities exist to further define the surface coating process and polycatecholamine self-assembly process by altering the polycatecholamine-hydrophilic polymer interactions.

Synthetic strategies to enhance the long-term stability of polymer brush coatings

High-density, end-anchored macromolecules that form so-called polymer brushes are popular components of bio-inspired surface coatings. In a bio-memetic approach, they have been utilized to reduce friction, repel contamination and control...

Macrocyclization efficiency for poly(2-oxazoline)s and poly(2-oxazine)s

Poly(2-oxazine)s show higher tendency to undergo macrocyclization compared to poly(2-alkyl-2-oxazoline)s, increasing scale-up potential and applicability of these cyclic polymers.

A unified kinetic Monte Carlo approach to evaluate (a)symmetric block and gradient copolymers with linear and branched chains illustrated for poly(2-oxazoline)s

The synthesis of well-defined gradient, block-gradient and di-block copolymers with both asymmetric and symmetric compositions considering hydrophilic and hydrophobic monomer units is relevant for application fields, such as drug/gene delivery...

Mussel-Inspired Multiloop Polyethers for Antifouling Surfaces

Despite the widespread use of polymers for antifouling coatings, the effect of the polymeric topology on the antifouling property has been largely underexplored. Unlike conventional brush polymers, a loop conformation often leads to strong steric stabilization of surfaces and antifouling and lubricating behavior owing to the large excluded volume and reduced chain ends. Herein, we present highly antifouling multiloop polyethers functionalized with a mussel-inspired catechol moiety with varying loop dimensions. Specifically, a series of polyethers with varying catechol contents were synthesized via anionic ring-opening polymerization by using triethylene glycol glycidyl ether (TEG) and catechol-acetonide glycidyl ether (CAG) to afford poly(TEG-co-CAG)_n. The versatile adsorption and antifouling effects of multiloop polyethers were evaluated using atomic force microscopy and a quartz crystal microbalance with dissipation. Furthermore, the crucial role of the loop dimension in the antifouling properties was analyzed via a surface force apparatus and a cell attachment assay. This study provides a new platform for the development of versatile antifouling polymers with varying topologies.

The role of poly(2-alkyl-2-oxazoline)s in hydrogels and biofabrication

Poly(2-alkyl-2-oxazoline)s (PAOXAs) have been rapidly emerging as starting materials in the design of tissue engineering supports and for the generation of platforms for cell cultures, especially in the form of hydrogels. Thanks to their biocompatibility, chemical versatility and robustness, PAOXAs now represent a valid alternative to poly(ethylene glycol)s (PEGs) and their derivatives in these applications, and in the formulation of bioinks for three-dimensional (3D) bioprinting. In this review, we summarize the recent literature where PAOXAs have been used as main components for hydrogels and biofabrication mixtures, especially highlighting how their easily tunable composition could be exploited to fabricate multifunctional biomaterials with an extremely broad spectrum of properties.

Topology and Molecular Architecture of Polyelectrolytes Determine Their pH-Responsiveness When Assembled on Surfaces

Polymer composition and topology of surface-grafted polyacids determine the amplitude of their pH-induced swelling transition. The intrinsic steric constraints characterizing cyclic poly(2-carboxypropyl-2-oxazoline) (c-PCPOXA) and poly(2-carboxyethyl-2-oxazoline) (c-PCEOXA) forming brushes on Au surfaces induce an enhancement in repulsive interactions between charged polymer segments upon deprotonation, leading to an amplified expansion and a significant increment in swelling with respect to their linear analogues of similar molar mass. On the other hand, it is the composition of polyacid grafts that governs their hydration in both undissociated and ionized forms, determining the degree of swelling during their pH-induced transition.

Injectable biocompatible poly(2-oxazoline) hydrogels by strain promoted alkyne-azide cycloaddition

Poly(2-alkyl-2-oxazoline) (PAOx) hydrogels are tailorable synthetic materials with demonstrated biomedical applications, thanks to their excellent biocompatibility and tunable properties. However, their use as injectable hydrogels is challenging as it requires invasive surgical procedures to insert the formed hydrogel into the body due to their nonsoluble 3D network structures. Herein, we introduce cyclooctyne and azide functional side chains to poly(2-oxazoline) copolymers to induce in situ gelation using strain promoted alkyne-azide cycloaddition. The gelation occurs rapidly, within 5 min, under physiological conditions when two polymer solutions are simply mixed. The influence of several parameters, such as temperature and different aqueous solutions, and stoichiometric ratios between the two polymers on the structural properties of the resultant hydrogels have been investigated. The gel formation within tissue samples was verified by subcutaneous injection of the polymer solution into an ex vivo model. The degradation study of the hydrogels in vitro showed that the degradation rate was highly dependent on the type of media, ranging from days to a month. This result opens up the potential uses of PAOx hydrogels in attempts to achieve optimal, injectable drug delivery systems and tissue engineering.

Hydrogels Generated from Cyclic Poly(2-Oxazoline)s Display Unique Swelling and Mechanical Properties

Cyclic macromolecules do not feature chain ends and are characterized by a higher effective intramolecular repulsion between polymer segments, leading to a higher excluded-volume effect and greater hydration with respect to their linear counterparts. As a result of these unique properties, hydrogels composed of cross-linked cyclic polymers feature enhanced mechanical strength while simultaneously incorporating more solvent with respect to networks formed from their linear analogues with identical molar mass and chemical composition. The translation of topology effects by cyclic polymers into the properties of polymer networks provides hydrogels that ideally do not include defects, such as dangling chain ends, and display unprecedented physicochemical characteristics.

Cyclic Polyethylene Glycol as Nanoparticle Surface Ligand

Cyclic polymers behave different than linear polymers due to the lack of end groups and smaller coil dimensions. Herein, we demonstrate that cyclic polyethylene glycol (PEG) can be used as an alternative of classical linear PEG ligands for gold nanoparticle (AuNP) stabilization. We observed that the brush height of cyclic PEG on AuNPs of diameter 4.4 and 13.2 nm increases identically as that of linear brushes with (Nσ^1/2)^0.7 (N, number of monomers in a chain and σ, grafting density) and that cyclic brushes are more stretched than their linear analogues when compared to their unperturbed dimensions. Such structural effect and the reduced footprint diameter in cyclic brushes with the entire chain in a concentrated polymer brush regime explains the distinct response of NPs to ionic strength and temperature, respectively, compared to linear analogues. These experiments are an important step in understanding the effect of polymer brush topology on colloidal properties.

Functional Nanoassemblies of Cyclic Polymers Show Amplified Responsiveness and Enhanced Protein-Binding Ability

The physicochemical properties of cyclic polymer adsorbates are significantly influenced by the steric and conformational constraints introduced during their cyclization. These translate into a marked difference in interfacial properties between cyclic polymers and their linear counterparts when they are grafted onto surfaces yielding nanoassemblies or polymer brushes. This difference is particularly clear in the case of cyclic polymer brushes that are designed to chemically interact with the surrounding environment, for instance, by associating with biological components present in the medium, or, alternatively, through a response to a chemical stimulus by a significant change in their properties. The intrinsic architecture characterizing cyclic poly(2-oxazoline)-based polyacid brushes leads to a broad variation in swelling and nanomechanical properties in response to pH change, in comparison with their linear analogues of identical composition and molecular weight. In addition, cyclic glycopolymer brushes derived from polyacids reveal an enhanced exposure of galactose units at the surface, due to their expanded topology, and thus display an increased lectin-binding ability with respect to their linear counterparts. This combination of amplified responsiveness and augmented protein-binding capacity renders cyclic brushes invaluable building blocks for the design of "smart" materials and functional biointerfaces.

Bottlebrush Glycopolymers from 2-Oxazolines and Acrylamides for Targeting Dendritic Cell-Specific Intercellular Adhesion Molecule-3-Grabbing Nonintegrin and Mannose-Binding Lectin

Lectins are omnipresent carbohydrate binding proteins that are involved in a multitude of biological processes. Unearthing their binding properties is a powerful tool toward the understanding and modification of their functions in biological applications. Herein, we present the synthesis of glycopolymers with a brush architecture via a "grafting from" methodology. The use of a versatile 2-oxazoline inimer was demonstrated to open avenues for a wide range of 2-oxazoline/acrylamide bottle brush polymers utilizing aqueous Cu-mediated reversible deactivation radical polymerization (Cu-RDRP). The polymers in the obtained library were assessed for their thermal properties in aqueous solution and their binding toward the C-type animal lectins dendritic cell-specific intercellular adhesion molecule-3-grabbing nonintegrin (DC-SIGN) and mannose-binding lectin (MBL) via surface plasmon resonance spectrometry. The encapsulation properties of a hydrophobic drug-mimicking compound demonstrated the potential use of glyco brush copolymers in biological applications.

Facile Fabrication of Bio- and Dual-Functional Poly(2-oxazoline) Bottle-Brush Brush Surfaces

Poly(2-oxazoline)s (POx) bottle-brush brushes have excellent biocompatible and lubricious properties, which are promising for the functionalization of surfaces for biomedical devices. Herein, a facile synthesis of POx is reported which is based bottle-brush brushes (BBBs) on solid substrates. Initially, backbone brushes of poly(2-isopropenyl-2-oxazoline) (PIPOx) were fabricated via surface initiated Cu0 plate-mediated controlled radical polymerization (SI-Cu0 CRP). Poly(2-methyl-2-oxazoline) (PMeOx) side chains were subsequently grafted from the PIPOx backbone via living cationic ring opening polymerization (LCROP), which result in ≈100 % increase in brush thickness (from 58 to 110 nm). The resultant BBBs shows tunable thickness up to 300 nm and high grafting density (σ) with 0.42 chains nm-2 . The synthetic procedure of POx BBBs can be further simplified by using SI-Cu0 CRP with POx molecular brush as macromonomer (Mn =536 g mol-1 , PDI=1.10), which results in BBBs surface up to 60 nm with well-defined molecular structure. Both procedures are significantly superior to the state-of-art approaches for the synthesis of POx BBBs, which are promising to design bio-functional surfaces.

Recent Developments in the Design of Non-Biofouling Coatings for Nanoparticles and Surfaces

Biofouling is a major issue in the field of nanomedicine and consists of the spontaneous and unwanted adsorption of biomolecules on engineered surfaces. In a biological context and referring to nanoparticles (NPs) acting as nanomedicines, the adsorption of biomolecules found in blood (mostly proteins) is known as protein corona. On the one hand, the protein corona, as it covers the NPs' surface, can be considered the biological identity of engineered NPs, because the corona is what cells will "see" instead of the underlying NPs. As such, the protein corona will influence the fate, integrity, and performance of NPs in vivo. On the other hand, the physicochemical properties of the engineered NPs, such as their size, shape, charge, or hydrophobicity, will influence the identity of the proteins attracted to their surface. In this context, the design of coatings for NPs and surfaces that avoid biofouling is an active field of research. The gold standard in the field is the use of polyethylene glycol (PEG) molecules, although zwitterions have also proved to be efficient in preventing protein adhesion and fluorinated molecules are emerging as coatings with interesting properties. Hence, in this review, we will focus on recent examples of anti-biofouling coatings in three main areas, that is, PEGylated, zwitterionic, and fluorinated coatings.

Bioinert and Lubricious Surfaces by Macromolecular Design

The modification of a variety of biomaterials and medical devices often encompasses the generation of biopassive and lubricious layers on their exposed surfaces. This is valid when the synthetic supports are required to integrate within physiological media without altering their interfacial composition and when the minimization of shear stress prevents or reduces damage to the surrounding environment. In many of these cases, hydrophilic polymer brushes assembled from surface-interacting polymer adsorbates or directly grown by surface-initiated polymerizations (SIP) are chosen. Although growing efforts by polymer chemists have been focusing on varying the composition of polymer brushes in order to attain increasingly bioinert and lubricious surfaces, the precise modulation of polymer architecture has simultaneously enabled us to substantially broaden the tuning potential for the above-mentioned properties. This feature article concentrates on reviewing this latter strategy, comparatively analyzing how polymer brush parameters such as molecular weight and grafting density, the application of block copolymers, the introduction of branching and cross-links, or the variation of polymer topology beyond the simple, linear chains determine highly technologically relevant properties, such as biopassivity and lubrication.

Synthesis of macrocyclic poly(ethylene oxide)s containing a protected thiol group: a strategy for decorating gold surfaces with ring polymers

Macrocyclic poly(ethylene oxide)s containing a protected thiol group are able to attach to gold substrates without thiol deprotection enabling surface modification.

Enzymatically crosslinked poly(2-alkyl-2-oxazoline) networks for 3D cell culture

Cellularized poly(2-alkyl-2-oxazoline) hydrogels fabricated by sortase-mediated crosslinking feature tunable mechanical properties and enable extremely high cell viability.