Exploration of Vitamin B6-Based Redox-Active Pyridinium Salts Towards the Application in Aqueous Organic Flow Batteries

Pyridoxal hydrochloride, a vitamin B6 vitamer, was synthetically converted to a series of diverse redox-active benzoyl pyridinium salts. Cyclic voltammetry studies demonstrated redox reversibility under basic conditions, and two of the most promising salts were subjected to laboratory-scale flow battery tests involving galvanostatic cycling at 10 mM in 0.1 M NaOH. In these tests, the battery was charged completely, corresponding to the transfer of two electrons to the electrolyte, but no discharge was observed. Both CV analysis and electrochemical simulations confirmed that the redox wave observed in the experimental voltammograms corresponds to a two-electron process. To explain the irreversibility in the battery tests, we conducted bulk electrolysis with the benzoyl pyridinium salts, affording the corresponding benzylic secondary alcohols. Computational studies suggest that the reduction proceeds in three consecutive steps: first electron transfer (ET), then proton-coupled electron transfer (PCET) and finally proton transfer (PT) to give the secondary alcohol. 1H NMR deuterium exchange studies indicated that the last PT step is not reversible in 0.1 M NaOH, rendering the entire redox process irreversible. The apparent reversibility observed in CV at the basic media likely arises from the slow rate of the PT step at the timescale of the measurement.

Enzymatic synthesis of pyridine heterocyclic compounds and their thermal stability

An efficient method was discovered for catalyzing the esterification under air using Novozym 435 to obtain pyridine esters. The following conditions were found to be optimal: 60 mg of Novozyme 435, 5.0 mL of n-hexane, a molar ratio of 2:1 for nicotinic acids (0.4 mmol) to alcohols (0.2 mmol), 0.25 g of molecular sieve 3A, a revolution speed of 150 rpm, a reaction temperature of 50 °C, and reaction time of 48 h. Under nine cycles of Novozym 435, the 80 % yield was consistently obtained. Optimum conditions were used to synthesize 23 pyridine esters, including five novel compounds. Among them, gas chromatography-mass spectrometry-olfactometry (GC-MS-O) showed phenethyl nicotinate (3g), (E)-hex-4-en-1-yl nicotinate (3m), and octyl nicotinate (3n) possessed strong aromas. Thermogravimetric analysis (TG) revealed that the compounds 3g, 3m and 3n exhibited stability at the specified temperature. This finding provides theoretical support for adding pyridine esters fragrance to high-temperature processed food.

Photochemical Skeletal Editing of Pyridines to Bicyclic Pyrazolines and Pyrazoles

We present an efficient one-pot photochemical skeletal editing protocol for the transformation of pyridines into diverse bicyclic pyrazolines and pyrazoles under mild conditions. The method requires no metals, photocatalysts, or additives and allows for the selective removal of specific carbon atoms from pyridines, allowing for unprecedented versatility. Our approach offers a convenient and efficient means for the late-stage modification of complex drug molecules by replacing the core pyridine skeleton. Moreover, we have successfully scaled up this procedure in stop-flow and flow-chemistry systems, showcasing its applicability to intricate transformations such as the Diels-Alder reaction, hydrogenation, [3 + 2] cycloaddition, and Heck reaction. Through control experiments and DFT calculations, we provide insights into the mechanistic underpinnings of this skeletal editing protocol.

A Unique Hybridization Route to Access Hydrazylnaphthalimidols as Novel Structural Scaffolds of Multitargeting Broad-Spectrum Antifungal Candidates

This study developed a class of novel structural antifungal hydrazylnaphthalimidols (HNs) with multitargeting broad-spectrum potential via multicomponent hybridization to confront increasingly severe fungal invasion. Some prepared HNs exhibited considerable antifungal potency; especially nitrofuryl HN 4a (MIC = 0.001 mM) exhibited a potent antifungal activity against Candida albicans, which is 13-fold higher than that of fluconazole. Furthermore, nitrofuryl HN 4a displayed low cytotoxicity, hemolysis and resistance, as well as a rapid fungicidal efficacy. Preliminary mechanistic investigations revealed that nitrofuryl HN 4a could inhibit lactate dehydrogenase to decrease metabolic activity and promote the accumulation of reactive oxygen species, leading to oxidative stress. Moreover, nitrofuryl HN 4a did not exhibit membrane-targeting ability; it could embed into DNA to block DNA replication but could not cleave DNA. These findings implied that HNs are promising as novel structural scaffolds of potential multitargeting broad-spectrum antifungal candidates for treating fungal infection.

Visible-Light Photocatalytic C-H Amination of Arenes Utilizing Acridine-Lewis Acid Complexes

This report describes the development of a visible-light photocatalytic system for C(sp2)-H amination that leverages in situ-generated photocatalysts. We demonstrate that the combination of acridine derivatives and Lewis acids forms potent photooxidants that promote the C-H amination of electronically diverse arenes upon irradiation with visible-light (440 nm). A first-generation photocatalyst composed of Sc(OTf)3 and acridine effects the C-H amination of substrates with oxidation potentials ≤ +2.5 V vs SCE with pyrazole, triazole, and pyridine nucleophiles. Furthermore, the simplicity and modularity of this system enable variation of both Lewis acid and acridine to tune reactivity. This enabled the rapid identification of two second-generation photocatalysts (derived from (i) Al(OTf)3 and acridine or (ii) Sc(OTf)3 and a pyridinium-substituted acridine) that catalyze a particularly challenging transformation: C(sp2)-H amination with benzene as the limiting reagent.

Leveraging Pyrazolium Ylide Reactivity to Access Indolizine and 1,2-Dihydropyrimidine Derivatives

N-Heterocyclic ylides are important synthetic precursors to rapidly build molecular complexity. Pyrazolium ylides have largely been unexplored, and we demonstrate their diverse utility in this report. We show that these readily accessible building blocks can be used to construct different heterocyclic skeletons by varying the coupling partner. Indolizines can be formed via an N-deletion type mechanism when reacting pyrazolium salts with electron deficient alkynes. 1,2-Dihydropyrimidines can be formed via a rearrangement mechanism when reacting pyrazolium ylides with isocyanates. These reactions enable access to valuable heteroarenes without the need for transition metal catalysis, high temperatures, or strong bases.

Pyridinium Ylide-Mediated Diastereoselective Synthesis of Spirocyclopropanyl-pyrazolones via Cascade Michael/Substitution Reaction

We have devised a highly diastereoselective formal [2 + 1] annulation reaction of arylidene/alkylidine-pyrazolones with in situ-generated supported as well as standard pyridinium ylides to construct spirocyclopropanyl-pyrazolones. The cascade approach exhibits a wide range of functional group tolerance, gram-scale capability, and substrate versatility. A diverse range of spirocyclic cyclopropanes was synthesized extensively with both mediators, and the supported pyridine was reused in subsequent cycles. Density functional theory calculations confirmed the formation of spirocyclopropane as the lower energy pathway.

The effect of structural changes on the self-assembly of novel green pyridinium-carboxylate gemini surfactants in Langmuir and Langmuir-Blodgett films

Engineered molecules with tailored molecular structures have the potential to advance various disciplines by enhancing the properties of biological membranes. In this study, we investigated the fundamental interfacial behavior of newly synthesized, water insoluble, cationic pyridinium-carboxylate based gemini surfactants (GSs) using picolinic acid (PA), nicotinic acid (NA), and isonicotinic acid (INA) and their interactions with dipalmitoylphosphatidylcholine (DPPC) in Langmuir and Langmuir-Blodgett (LB) films. Two synthetic methodologies were employed: (a) connecting two alkyl pyridinecarboxylates through the nitrogen atoms with a xylenyl spacer, namely, PAGS, NAGS1, and INAGS; and (b) dimerizing two nicotinic acid molecules through ester linkages with 1,4-benzenedimethanol, and then quaternizing the pyridine nitrogens with hexadecyl chains to yield NAGS2. A combination of Brewster angle microscopy (BAM) and atomic force microscopy (AFM) imaging techniques yielded valuable insights into the morphology of the GS films and their mixtures with DPPC. Density functional theory (DFT) calculations were used to gain further information on the GSs structures and understand their assembly. The results indicate that the film of INAGS is the most hydrophobic film, and its monolayer is the least compressible. When the nitrogen atom and a carboxylate group of the headgroup are positioned closer to each other, the GS molecules tend to form aggregates instead of a continuous film which is observed for the INAGS surfactant. This observation is consistent with the DFT energy values of pair interactions, indicating that both PAGS and NAGS1 have closely packed conformations with high stabilization energy.

Identification, synthesis, and characterization of an unprecedented N-(2-carboxyethyl) adduct impurity in an injectable ganirelix formulation

Ganirelix, a peptide-based drug used to treat female infertility, has been in high market demand, which attracted generic formulation. A hitherto unknown impurity of ganirelix was observed in our formulation process, which reached ~0.3% in 6 months and led to a detailed investigation of its structure. In-depth analysis of ESI-MS/MS data of this impurity coupled with an artificial intelligence prediction tool led to a highly unusual putative structure, that is, N-(2-carboxyethyl)-ganirelix (NCE-GA), which was authenticated by chemical synthesis from ganirelix and NMR analysis and via corroborated HPLC and MS/MS data with the formulation-derived impurity.

Morita-Baylis-Hillman Spirannulation under Phosphine- and Anion-Binding Catalysis

We introduce an advancement in Morita-Baylis-Hillman (MBH) chemistry that provides access to α-spirannulated enones. The treatment of enone-tethered azaarenium salts with catalytic amounts of organophosphines provides spiroindenyl dihydropyridines. It represents the α-spirannulation of enones via an intramolecular MBH (IMBH) reaction utilizing dual phosphine- and anion-binding catalysis. The IMBH adducts were subjected to several post-synthetic modifications to access highly functionalized molecules.

Tandem Reactions of Electrophilic Indoles toward Indolizines and Their Subsequent Transformations through Pd(II)-Mediated C-H Functionalization to Access Polyring-Fused N-Heterocycles

A simple and efficient synthetic approach for generating a library of structurally novel indolizines has been developed via sequential 1,3-dipolar cycloaddition-ring opening processes. Using this methodology, a series of indolizines bearing different substituents were made in moderate to good yields. The presence of two functionalizable C-H bonds in these indolizine motifs makes them attractive for accessing fused indolizine scaffolds. In this line, we have introduced palladium-mediated site-selective C-H functionalizations, where the N-center and the two C-H centers of the indolizine moiety can be readily functionalized to generate fused N-heterocycles. Utilizing a Pd-mediated dual C-H activation of 5-benzoyl-substituted indolizine afforded 6H-indeno-indolizine, and a tetracene, viz., indolizino[2,1-b]indoles, was produced in the same substrate by the Pd-catalyzed selective C-H amination in the presence of oxygen.

Hybrid pharmacophore design and synthesis of donepezil-inspired aurone derivative salts as multifunctional acetylcholinesterase inhibitors

Flavonoids, a ubiquitous group of plant polyphenols, are well-known for their beneficial effects on human health. Their phenylchromane skeletons have structural similarities to donepezil [the US FDA-approved drug used to treat Alzheimer's disease (AD)]. The objective of this study was to design and synthesize valuable agents derived from flavonoids for relieving the symptoms of AD. A variety of flavonoid derivative salts incorporating benzylpyridinium units were synthesized and several of them remarkedly inhibited acetylcholinesterase (AChE) activity in vitro. Additionally, aurone derivative salts protected against cell death resulting from t-BHP exposure in rat pheochromocytoma PC12 cells and slightly promoted neurite outgrowth. Furthermore, they potently suppressed the aggregation of amyloid-β (Aβ1-42). Our findings highlight the effectiveness of donepezil-inspired aurone derivative salts as multipotent candidates for AD.

Facile Construction of Benzo[d][1,3]oxazocine: Reductive Radical Dearomatization of N-Alkyl Quinoline Quaternary Ammonium Salts

Reductive radical dearomatization N-alkyl quinoline quaternary ammonium salts to synthesize structurally complex and challenging polysubstituted benzo[d][1,3]oxazocines was first reported. The mechanism showed various allyl alcohols can be converted into alkyl radicals under reduction conditions of iron/silane. These radicals then nucleophilically attack the C4 site of N-alkyl quinoline quaternary ammonium salts, and intramolecular cyclization of the resulting intermediate generates the target product. This method not only produced a series of novel polysubstituted benzo[d][1,3]oxazocines but also prepared polycyclic benzo[d][1,3]oxazocines. Finally, this strategy made up for the lack of reductive radical reports on N-alkylquinolinium salts and also had the advantages of mild reaction conditions, wide substrate range, and novel product structure.

Pyridine Iodine(I) Cations: Kinetic Trapping as a Sulfonate Complexes

Seven pyridine iodine(I) sulfonate complexes were prepared and isolated at low temperatures and characterized by X-ray diffraction analysis. The inherently instable pyridine iodine(I) cations are stabilized by an oxygen of sulfonate anions via the I⋅⋅⋅O halogen bond. In these complexes, the iodine atom of the pyridine iodine(I) cation acts as an electron acceptor and the sulfonate oxygen as the electron donor. These complexes are stable enough in the crystalline state, yet decompose rapidly under ambient conditions, also being unstable in solution. The (pyridine)N-I bond lengths [2.140(3)-2.197(2) Å] and the I⋅⋅⋅O halogen bonds [2.345(6)-2.227(3) Å] are analogous to (imide)N-I⋅⋅⋅O-N-pyridine uncharged halogen-bonded complexes formed from N-haloimides and pyridine N-oxides, thus confirming the existence of elusive pyridine iodine(I) cation.

In Situ Activation of Azaarenes and Terminal Alkynes to Construct Bridged Polycyclic Compounds Containing Isoquinolinones

A copper-catalyzed [4+2] cyclization reaction of isoquinolines and alkynes is developed for the one-step construction of isoquinolinone derivatives with multisubstituted bridging rings. The unique feature of this three-component tandem cyclization reaction is the functionalization of the C1, N2, C3, and C4 positions of 3-haloisoquinolines via the construction of new C-N, C═O, and C-C bonds. This dearomatization strategy for the synthesis of structurally complex isoquinolinone-bridged cyclic compounds offers good chemoselectivity, broad functional group compatibility, greenness, and high step economy.

Pyridinium-Derived Mesoionic N-Heterocyclic Olefins (py-mNHOs)

Mesoionic polarization allows access to electron-rich olefins that have found application as organocatalysts, ligands, or nucleophiles. Herein, we report the synthesis and characterization of a series of 3-methylpyridinium-derived mesoionic olefins (py-mNHOs). We used a DFT-supported design concept, which showed that the introduction of aryl groups in the 1-, 2-, 4-, and 6-positions of the heterocyclic core allowed the kinetic stabilization of the novel mesoionic compounds. Tolman electronic parameters indicate that py-mNHOs are remarkably strong σ-donor ligands toward transition metals and main group Lewis acids. Additionally, they are among the strongest nucleophiles on the Mayr reactivity scale. In reactions of py-mNHOs with electron-poor π-systems, a gradual transition from the formation of zwitterionic adducts via stepwise to concerted 1,3-dipolar cycloadditions was observed experimentally and analyzed by quantum-chemical calculations.

Synthesis of Phenol-Pyridinium Salts Enabled by Tandem Electron Donor-Acceptor Complexation and Iridium Photocatalysis

Herein, we describe a dual photocatalytic system to synthesize phenol-pyridinium salts using visible light. Utilizing both electron donor-acceptor (EDA) complex and iridium(III) photocatalytic cycles, the C-N cross-coupling of unprotected phenols and pyridines proceeds in the presence of oxygen to furnish pyridinium salts. Photocatalytic generation of phenoxyl radical cations also enabled a nucleophilic aromatic substitution (SNAr) of a fluorophenol with an electron-poor pyridine. Spectroscopic experiments were conducted to probe the mechanism and reaction selectivity. The unique reactivity of these phenol-pyridinium salts were displayed in several derivatization reactions, providing rapid access to a diverse chemical space.

"Synthesis and characterization of a novel pyridinium iodide-tagged Schiff base and its metal complexes as potential ACHN inhibitors"

In quest of developing an efficient and effective drug against the ACHN human renal adenocarcinoma cell line herein, we report the synthesis and characterization of a novel Pyridinium iodide-tagged Schiff base (5) and its Cu (II)/Zn (II)/Cd (II)-complexes (6). The synthesized compounds are well characterized by Elemental analysis, UV-Visible, FTIR, Magnetic Susceptibility, NMR, HRMS, MALDI, and PXRD techniques. They were then subsequently tested on the ACHN cell lines using MTT assays and their IC50 values were determined, followed by their ROS production capacity. Among the tested compounds Zn (II)-complex 6(b) was found to be the most potent one with a minimum IC50 value while the ligand (5) was the least.

A General Strategy for N-(Hetero)arylpiperidine Synthesis Using Zincke Imine Intermediates

Methods to synthesize diverse collections of substituted piperidines are valuable due to the prevalence of this heterocycle in pharmaceutical compounds. Here, we present a general strategy to access N-(hetero)arylpiperidines using a pyridine ring-opening and ring-closing approach via Zincke imine intermediates. This process generates pyridinium salts from a wide variety of substituted pyridines and (heteroaryl)anilines; hydrogenation reactions and nucleophilic additions then access the N-(hetero)arylpiperidine derivatives. We successfully applied high-throughput experimentation (HTE) using pharmaceutically relevant pyridines and (heteroaryl)anilines as inputs and developed a one-pot process using anilines as nucleophiles in the pyridinium salt-forming processes. This strategy is viable for generating piperidine libraries and applications such as the convergent coupling of complex fragments.

Iodine-Mediated Heterocyclization for the Synthesis of 6-Alkylthio-1,3,5-triazine-2,4-diamines from N-Alkylpyridinium Salts and NH4SCN

An iodine-mediated method for the synthesis of 6-alkylthio-1,3,5-triazine-2,4-diamines by the reaction of N-alkylpyridinium salts and NH4SCN in air is reported. Twenty-seven compounds were obtained under the standard conditions. Pyridinium salts work as benzyl-group transfer reagents to promote the formation of the CBn-SSCN bond and thereby the construction of the triazine skeleton. A plausible mechanism is proposed based on the experimental results and literature survey.

Moisture-Assisted Hydroboration of Nitriles and Conversion Thereof to N-Heterocyles and N-Containing Derivatives

The recent revelation of hidden-borane catalysis has revolutionized the field of catalytic hydroboration in organic synthesis. Many nucleophilic reaction promoters, previously believed to be the catalysts, in fact primarily facilitated the formation of borane (BH3), which subsequently acted as the true catalyst. This revelation prompted us to explore the untapped potential of these unexpected transformations, with a view to simplify hydroboration using more cost-effective and environmentally friendly nucleophilic precatalysts. Via computational studies, we were able to identify that water can actually undertake that role. Herein, we report a study on the simple hydroboration of nitriles, a notoriously challenging yet synthetically valuable class of substrates, using nothing more than moisture as an activating agent. This moisture-assisted nitrile hydroboration process can seamlessly integrate with a range of downstream transformations in a one-pot fashion to produce valuable N-containing products such as symmetrical imines, thioureas, and bis(alcohol)amines as well as N-heterocycles such as pyrroles, pyridines, pyridinium salts, 2-iminothiazolines, and carbazoles.

Sulfonium Salt Reagents for the Introduction of Deuterated Alkyl Groups in Drug Discovery

The pharmacokinetics of pharmaceutical drugs can be improved by replacing C-H bonds with the more stable C-D bonds at the α-position to heteroatoms, which is a typical metabolic site for cytochrome P450 enzymes. However, the application of deuterated synthons is limited. Herein, we established a novel concept for preparing deuterated reagents for the successful synthesis of complex drug skeletons with deuterium atoms at the α-position to heteroatoms. (dn -Alkyl)diphenylsulfonium salts prepared from the corresponding nondeuterated forms using inexpensive and abundant D2 O as the deuterium source with a base, were used as electrophilic alkylating reagents. Additionally, these deuterated sulfonium salts were efficiently transformed into dn -alkyl halides and a dn -alkyl azide as coupling reagents and a dn -alkyl amine as a nucleophile. Furthermore, liver microsomal metabolism studies revealed deuterium kinetic isotope effects (KIE) in 7-(d2 -ethoxy)flavone. The present concept for the synthesis of deuterated reagents and the first demonstration of a KIE in a d2 -ethoxy group will contribute to drug discovery research based on deuterium chemistry.

Strategies for the Preparation of Chitosan Derivatives for Antimicrobial, Drug Delivery, and Agricultural Applications: A Review

Chitosan has received much attention for its role in designing and developing novel derivatives as well as its applications across a broad spectrum of biological and physiological activities, owing to its desirable characteristics such as being biodegradable, being a biopolymer, and its overall eco-friendliness. The main objective of this review is to explore the recent chemical modifications of chitosan that have been achieved through various synthetic methods. These chitosan derivatives are categorized based on their synthetic pathways or the presence of common functional groups, which include alkylated, acylated, Schiff base, quaternary ammonia, guanidine, and heterocyclic rings. We have also described the recent applications of chitosan and its derivatives, along with nanomaterials, their mechanisms, and prospective challenges, especially in areas such as antimicrobial activities, targeted drug delivery for various diseases, and plant agricultural domains. The accumulation of these recent findings has the potential to offer insight not only into innovative approaches for the preparation of chitosan derivatives but also into their diverse applications. These insights may spark novel ideas for drug development or drug carriers, particularly in the antimicrobial, medicinal, and plant agricultural fields.

π-Electronic ion pairs: building blocks for supramolecular nanoarchitectonics viaiπ-iπ interactions

The pairing of charged π-electronic systems and their ordered arrangement have been achieved by iπ-iπ interactions that are derived from synergetically worked electrostatic and dispersion forces. Charged π-electronic systems that provide ion pairs as building blocks for assemblies have been prepared by diverse strategies for introducing charge in the core π-electronic systems. One method to prepare charged π-electronic systems is the use of covalent bonding that makes π-electronic ions and valence-mismatched metal complexes as well as protonated and deprotonated states. Noncovalent ion complexation is another method used to create π-electronic ions, particularly for anion binding, producing negatively charged π-electronic systems. Charged π-electronic systems afford various ion pairs, consisting of both cationic and anionic π-systems, depending on their combinations. Geometries and electronic states of the constituents in π-electronic ion pairs affect the photophysical properties and assembling modes. Recent progress in π-electronic ion pairs has revealed intriguing characteristics, including the transformation into radical pairs through electron transfer and the magnetic properties influenced by the countercations. Furthermore, the assembly states exhibit diversity as observed in crystals and soft materials including liquid-crystal mesophases. While the chemistry of ion pairs (salts) is well-established, the field of π-electronic ion pairs is relatively new; however, it holds great promise for future applications in novel materials and devices.

Domino Approach for the Synthesis of Pyridinium Salts and 1,2,3,8a-Tetrahydroimidazo[1,2-a]pyridines from 2-Imidazolines and Propiolic Acid Esters

Adducts of 1-alkyl-2-imidazolines and two molecules of alkyl propiolate, possessing an N-propargyl-β-enaminoester fragment, easily undergo a domino reaction to form pyridinium salts with β-(alkylammonio)ethyl group at the nitrogen atom in the presence of 2 equiv of a protic acid. Treatment of the above reaction mixture with a base gives 1,2,3,8a-tetrahydroimidazo[1,2-a]pyridines. Reaction of the latter compounds with acid chlorides affords pyridinium salts with β-(alkylamido)ethyl moiety at the nitrogen atom.

Continuous flow synthesis of pyridinium salts accelerated by multi-objective Bayesian optimization with active learning

We report a human-in-the-loop implementation of the multi-objective experimental design via a Bayesian optimization platform (EDBO+) towards the optimization of butylpyridinium bromide synthesis under continuous flow conditions. The algorithm simultaneously optimized reaction yield and production rate (or space-time yield) and generated a well defined Pareto front. The versatility of EDBO+ was demonstrated by expanding the reaction space mid-campaign by increasing the upper temperature limit. Incorporation of continuous flow techniques enabled improved control over reaction parameters compared to common batch chemistry processes, while providing a route towards future automated syntheses and improved scalability. To that end, we applied the open-source Python module, nmrglue, for semi-automated nuclear magnetic resonance (NMR) spectroscopy analysis, and compared the acquired outputs against those obtained through manual processing methods from spectra collected on both low-field (60 MHz) and high-field (400 MHz) NMR spectrometers. The EDBO+ based model was retrained with these four different datasets and the resulting Pareto front predictions provided insight into the effect of data analysis on model predictions. Finally, quaternization of poly(4-vinylpyridine) with bromobutane illustrated the extension of continuous flow chemistry to synthesize functional materials.

An interrupted Corey-Chaykovsky reaction of designed azaarenium salts: synthesis of complex polycyclic spiro- and fused cyclopropanoids

Simultaneous dearomatizing spirannulation of pyridinium salts is still in its infancy. Here, we present an organized skeletal remodeling of designed pyridinium salts by utilizing an interrupted Corey-Chaykovsky reaction to access unprecedented and structurally intriguing molecular architectures such as the vicinal bis-spirocyclic indanones and spirannulated benzocycloheptanones. This hybrid strategy rationally merges the nucleophilic features of sulfur ylides with the electrophilic pyridinium salts to achieve the regio- and stereoselective synthesis of new classes of cyclopropanoids. The plausible mechanistic pathways were derived from experimental results and control experiments.

Late-Stage C-H Functionalization of Azines

Azines, such as pyridines, quinolines, pyrimidines, and pyridazines, are widespread components of pharmaceuticals. Their occurrence derives from a suite of physiochemical properties that match key criteria in drug design and is tunable by varying their substituents. Developments in synthetic chemistry, therefore, directly impact these efforts, and methods that can install various groups from azine C-H bonds are particularly valuable. Furthermore, there is a growing interest in late-stage functionalization (LSF) reactions that focus on advanced candidate compounds that are often complex structures with multiple heterocycles, functional groups, and reactive sites. Because of factors such as their electron-deficient nature and the effects of the Lewis basic N atom, azine C-H functionalization reactions are often distinct from their arene counterparts, and the application of these reactions in LSF contexts is difficult. However, there have been many significant advances in azine LSF reactions, and this review will describe this progress, much of which has occurred over the past decade. It is possible to categorize these reactions as radical addition processes, metal-catalyzed C-H activation reactions, and transformations occurring via dearomatized intermediates. Substantial variation in reaction design within each category indicates both the rich reactivity of these heterocycles and the creativity of the approaches involved.

Formal Cross-Coupling of Amines and Carboxylic Acids to Form sp3-sp2 Carbon-Carbon Bonds

Amines and carboxylic acids are abundant synthetic building blocks that are classically united to form an amide bond. To access new pockets of chemical space, we are interested in the development of amine-acid coupling reactions that complement the amide coupling. In particular, the formation of carbon-carbon bonds by formal deamination and decarboxylation would be an impactful addition to the synthesis toolbox. Here, we report a formal cross-coupling of alkyl amines and aryl carboxylic acids to form C(sp³)-C(sp²) bonds following preactivation of the amine-acid building blocks as a pyridinium salt and N-acyl-glutarimide, respectively. Under nickel-catalyzed reductive cross-coupling conditions, a diversity of simple and complex substrates are united in good to excellent yield, and numerous pharmaceuticals are successfully diversified. High-throughput experimentation was leveraged in the development of the reaction and the discovery of performance-enhancing additives such as phthalimide, RuCl₃, and GaCl₃. Mechanistic investigations suggest phthalimide may play a role in stabilizing productive Ni complexes rather than being involved in oxidative addition of the N-acyl-imide and that RuCl₃ supports the decarbonylation event, thereby improving reaction selectivity.

Development of a synthesis strategy for sulfamethoxazole derivatives and their coupling with hydrogel microparticles

Sulfonamides were the first synthetic antibiotics broadly applied in veterinary and human medicine. Their increased use over the last few decades and limited technology to degrade them after entering the sewage system have led to their accumulation in the environment. A new hydrogel microparticle based biosensing application for sulfonamides is developed to overcome existing labour-intensive, and expensive detection methods to analyse and quantify their environmental distribution. This biosensing assay is based on the soft colloidal probe principle and requires microparticle functionalization strategies with target molecules. In this study, we developed a step-wise synthesis approach for sulfamethoxazole (SMX) derivatives in high yield, with SMX being one of the most ubiquitous sulfonamide antibiotics. After de novo synthesis of the SMX derivative, two coupling schemes to poly(ethylene glycol) (PEG) hydrogel microparticles bearing maleimide and thiol groups were investigated. In one approach, we coupled a cysteamine linker to a carboxyl group at the SMX derivative allowing for subsequent binding via the thiol-functionality to the maleimide groups of the microparticles in a mild, high-yielding thiol-ene "click" reaction. In a second approach, an additional 1,11-bis(maleimido)-3,6,9-trioxaundecane linker was coupled to the cysteamine to target the hydrolytically more stable thiol-groups of the microparticles. Successful PEG microparticle functionalization with the SMX derivatives was proven by IR spectroscopy and fluorescence microscopy. SMX-functionalized microparticles will be used in future applications for sulfonamide detection as well as for pull-down assays and screenings for new sulfomethoxazole binding targets.

Synthesis of multi-module low density lipoprotein receptor class A domains with acid labile cyanopyridiniumylides (CyPY) as aspartic acid masking groups

Low-density lipoprotein receptor class A domains (LA modules) are common ligand-binding domains of transmembrane receptors of approximately 40 amino acids that are involved in several cellular processes including endocytosis of extracellular targets. Due to their wide-ranging function and distribution among different transmembrane receptors, LA modules are of high interest for therapeutic applications. However, the efficient chemical synthesis of LA modules and derivatives is hindered by complications, many arising from the high abundance of aspartic acid and consequent aspartimide formation. Here, we report a robust, efficient and general applicable chemical synthesis route for accessing such LA modules, demonstrated by the synthesis and folding of the LA3 and LA4 modules of the low-density lipoprotein receptor, as well as a heterodimeric LA3-LA4 constructed by chemical ligation. The synthesis of the aspartic acid-rich LA domain peptides is made possible by the use of cyanopyridiniumylides (CyPY) - reported here for the first time - as a masking group for carboxylic acids. We show that cyanopyridiniumylide masked aspartic acid monomers are readily available building blocks for solid phase peptide synthesis and successfully suppress aspartimide formation. Unlike previously reported ylide-based carboxylic acid protecting groups, CyPY protected aspartic acids are converted to the free carboxylic acid by acidic hydrolysis and are compatible with all common residues and protecting groups. The chemical synthesis of Cys- and Asp-rich LA modules enables new access to a class of difficult to provide, but promising protein domains.

Design of a new method for one-pot synthesis of 2-amino thiazoles using trichloroisocyanuric acid in the presence of a novel multi-functional and magnetically catalytic nanosystem: Ca/4-MePy-IL@ZY-Fe3O4

In this study, an effective approach was developed to synthesize a novel, multifunctional ionic liquid nanocatalyst based on zeolite-Y with 4-methylpyridinium chloride (4-MePy-Cl) and calcium ions (Ca/4-MePy-IL@ZY). Then, Fe₃O₄ nanoparticles were produced inside the zeolite pores with the use of ultrasonic waves. XRD, FESEM, FT-IR, EDX-Map, TGA-DTA, VSM, BET, and atomic absorption techniques were used to identify the structure of the magnetic nanocomposite. Then, its catalytic activity in the one-pot synthesis of 2-aminothiazoles using trichloroisocyanuric acid (TCCA) as a green supplier of halogen ions for intermediates was studied. To provide ideal conditions for the preparation of pure products, first, the one-pot reaction of acetophenone and thiourea in various solvents, different temperatures, and the presence of different amounts of nanocatalysts and the molar amount of TCCA was used. Next, the reaction was investigated in the one-pot preparation of 2-aminothiazole derivatives under optimal conditions. This method replaces iodine (I₂), a toxic reagent, for the first time with TCCA, a safe and sustainable source of halogen. The use of non-toxic solvent and a cheap, safe, recyclable nanocatalyst, quick reaction times, high efficiency, and ease of nanocatalyst separation with the aid of a magnet are additional benefits of this method. This has led to this procedure being classified as "green chemistry".

Protocol for efficient dearomatization of N-heteroaromatics with halogen(I) complex catalyst

In this protocol, we describe the application of a halogen(I) complex as a highly active non-metallic complex catalyst. Specifically, we present a detailed guide to synthesize the halogen(I) complex catalyst and utilize it as an anion-binding catalyst for the Mukaiyama-Mannich-type reaction of N-heteroaromatics such as pyridines. By utilizing a simple catalyst preparation approach and relatively low catalyst loading, the steps outlined in this protocol contribute to the rapid development of useful substances such as pharmaceuticals and functional materials. For complete details on the use and execution of this protocol, please refer to Oishi et al. (2022).1.

Tandem Ring-Contraction/Regioselective C-H Iodination Reaction of Pyridinium Salts

A facile route for direct access to the 4-iodopyrrole-2-carbaldehydes from pyridinium salts has been successfully developed, which undergoes cascade pyrrole-2-carbaldehydes construction/selective C4 position iodination process. Using Na₂S₂O₈ as an oxidant and readily available sodium iodide as an iodine source, a variety of 4-iodopyrrole-2-carbaldehydes were obtained in good to excellent yields. Atom- and step-economy, good functional group tolerance, high regioselectivity, as well as mild conditions entail this transformation an alternative strategy for enriching pyrroles library.

Highly electron deficient diketopyrrolopyrroles

The synthesis, spectroelectrochemical and structural characteristics of highly electron-accepting diketopyrrrolopyrrole (DPP) molecules with adjoining pyridinium rings is reported, along with an assessment of their toxicity, which is apparently low. The compounds show reversible electrochemistry and in one subfamily a massive increase in molar extinction coefficient upon electrochemical reduction.

Synthesis, antitubercular evaluation, and molecular docking studies of hybrid pyridinium salts derived from isoniazid

In the quest to develop potent inhibitors for Mycobacterium tuberculosis, novel isoniazid-based pyridinium salts were designed, synthesized, and tested for their antimycobacterial activities against the H₃₇ Rv strain of Mycobacterium tuberculosis using rifampicin as a standard. The pyridinium salts 4k, 4l, and 7d showed exceptional antimycobacterial activities with MIC₉₀ at 1 µg/mL. The in vitro cytotoxicity and pharmacokinetics profiles of these compounds were established for the identification of a lead molecule using in vivo efficacy proof-of-concept studies and found that the lead compound 4k possesses LC₅₀ value at 25 µg/mL. The in vitro antimycobacterial activity results were further supported by in silico studies with good binding affinities ranging from -9.8 to -11.6 kcal/mol for 4k, 4l, and 7d with the target oxidoreductase DprE1 enzyme. These results demonstrate that pyridinium salts derived from isoniazid can be a potentially promising pharmacophore for the development of novel antitubercular candidates.

Recent Advances in Catalytic and Technology-Driven Radical Addition to N,N-Disubstituted Iminium Species

Recently, radical chemistry has grown exponentially in the toolbox of organic synthetic chemists. Upon the (re)introduction of modern catalytic and technology-driven strategies, the implementation of highly reactive radical species is currently facilitated while expanding the scope of numerous synthetic methodologies. In this context, this review intends to cover the recent advances in radical-based transformations of N,N-disubstituted iminium substrates that encompass unique reactivities with respect to imines or protonated iminium salts. In particular, we have focused on the literature concerning the dipole type substrates, such as nitrones or azomethine imines, together with the chemistry of N⁺-X^- (X = O, NR) azaarenium dipoles, which proved to be very versatile platforms in that field of research. The N-alkylazaarenium salts were been considered, which demonstrated specific reactivity profiles in radical chemistry.

Catalytic photochemical enantioselective α-alkylation with pyridinium salts

We have developed a chiral amine catalyzed enantioselective α-alkylation of aldehydes with amino acid derived pyridinium salts as alkylating reagents. The reaction proceeds in the presence of visible light and in the absence of a photocatalyst via a light activated charge-transfer complex. We apply this photochemical stereoconvergent process to the total synthesis of the lignan natural products (-)-enterolactone and (-)-enterodiol. Mechanistic studies support the ground-state complexation of the reactive components followed by divergent charge-transfer processes involving catalyst-controlled radical chain and in-cage radical combination steps.

Halogenation of the 3-position of pyridines through Zincke imine intermediates

Pyridine halogenation reactions are crucial for obtaining the vast array of derivatives required for drug and agrochemical development. However, despite more than a century of synthetic endeavors, halogenation processes that selectively functionalize the carbon-hydrogen bond in the 3-position of a broad range of pyridine precursors remain largely elusive. We report a reaction sequence of pyridyl ring opening, halogenation, and ring closing whereby the acyclic Zincke imine intermediates undergo highly regioselective halogenation reactions under mild conditions. Experimental and computational mechanistic studies indicate that the nature of the halogen electrophile can modify the selectivity-determining step. Using this method, we produced a diverse set of 3-halopyridines and demonstrated late-stage halogenation of complex pharmaceuticals and agrochemicals.

Photochemical C(sp2 )-H Pyridination via Arene-Pyridinium Electron Donor-Acceptor Complexes

This report describes the development of a photochemical method for C(sp² )-H pyridination that leverages the photoexcitation of electron donor-acceptor (EDA) complexes. Experimental and DFT studies show that black light (λ_max ≈350 nm) irradiation of solutions of protonated pyridines (acceptors) and aromatic C-H substrates (donors) results in single electron transfer to form aryl radical cation intermediates that can be trapped with pyridine nucleophiles under aerobic conditions. With some modification of the reaction conditions, this EDA activation mode is also effective for promoting the oxidatively triggered S_N Ar pyridination of aryl halides. Overall, this report represents an inexpensive and atom-economical approach to photochemical pyridination reactions that eliminates the requirement of an exogenous photocatalyst.

Synthesis and Biological Activity of N-acyl Anabasine and Cytisine Derivatives with Adamantane, Pyridine and 1,2-Azole Fragments

A series of N-acyl derivatives of anabasine and cytisine were prepared, to discover novel, natural product-based medicinal agents. All synthesized compounds were tested for antimicrobial, antifungal, antiviral and analgesic activity. The most pronounced antibacterial activity was shown by the compounds with isoxazole fragments, while the adamantane derivatives showed the greatest antiviral effect. It was found that the majority of anabasine derivatives showed significant analgesic activity, reducing the pain response of animals to the irritating effect of acetic acid. The presence of a high level of antimicrobial and antiviral activity in newly synthesized compounds makes it possible to consider them promising for further study of their pharmacological properties.

N-Functionalized Pyridinium Salts: A New Chapter for Site-Selective Pyridine C-H Functionalization via Radical-Based Processes under Visible Light Irradiation

The radical-mediated C-H functionalization of pyridines has attracted considerable attention as a powerful tool in synthetic chemistry for the direct functionalization of the C-H bonds of the pyridine scaffold. Classically, the synthetic methods for functionalized pyridines often involve radical-mediated Minisci-type reactions under strongly acidic conditions. However, the site-selective functionalization of pyridines in unbiased systems has been a long-standing challenge because the pyridine scaffold contains multiple competing reaction sites (C2 vs C4) to intercept free radicals. Therefore, prefunctionalization of the pyridine is required to avoid issues observed with the formation of a mixture of regioisomers and overalkylated side products.Recently, N-functionalized pyridinium salts have been attracting considerable attention in organic chemistry as promising radical precursors and pyridine surrogates. The notable advantage of N-functionalized pyridinium salts lies in their ability to enhance the reactivity and selectivity for synthetically useful reactions under acid-free conditions. This approach enables exquisite regiocontrol for nonclassical Minisci-type reactions at the C2 and C4 positions under mild reaction conditions, which are suitable for the late-stage functionalization of bioactive molecules with greater complexity and diversity. Over the past five years, a variety of fascinating synthetic applications have been developed using various types of pyridinium salts under visible light conditions. In addition, a new platform for alkene difunctionalization using appropriately designed N-substituted pyridinium salts as bifunctional reagents has been reported, offering an innovative assembly process for complex organic architectures. Intriguingly, strategies involving light-absorbing electron donor-acceptor (EDA) complexes between pyridinium salts and suitable electron-rich donors further open up new reactivity under photocatalyst-free conditions. Furthermore, we developed enantioselective reactions using pyridinium salts to afford enantioenriched molecules bearing pyridines through single-electron N-heterocyclic carbene (NHC) catalysis.Herein, we provide a broad overview of our recent contributions to the development of N-functionalized pyridinium salts and summarize the cornerstones of organic reactions that successfully employ these pyridinium salts under visible light conditions. The major advances in the field are systematically categorized on the basis of the pyridines' N-substituent, N-X (X = O, N, C, and SO₂CF₃), and its reactivity patterns. Furthermore, the identification of new activation modes and their mechanistic aspects are discussed by providing representative contributions to each paradigm. We hope that this Account will inspire broad interest in the continued innovation of N-functionalized pyridinium salts in the exploration of new transformations.

Chemo- and Regioselective Multiple C(sp2 )-H Insertions of Malonate Metal Carbenes for Late-Stage Functionalizations of Azahelicenes

Chiral quinacridines react up to four times, step-by-step, with α-diazomalonates under Ru^II and Rh^II catalysis. By selecting the catalyst, [CpRu(CH₃ CN)₃ ][PF₆ ] (Cp=cyclopentadienyl) or Rh₂ (oct)₄ , chemo and regioselective insertions of derived metal carbenes are achieved in favor of mono- or bis-functionalized malonate derivatives, respectively, (r.r.>49 : 1, up to 77 % yield, 12 examples). This multi-introduction of malonate groups is particularly useful to tune optical and chemical properties such as absorption, emission or Brønsted acidity but also cellular bioimaging. Density-functional theory further elucidates the origin of the carbene insertion selectivity and also showcases the importance of conformations in the optical response.

Total Synthesis of the Tetracyclic Pyridinium Alkaloid epi-Tetradehydrohalicyclamine B

The first total synthesis of a tetracyclic marine pyridinium alkaloid hinged on recent advances in chemoselectivity management: While many classical methods failed to afford the perceptively simple pyridine-containing core of the target, nickel/iridium photoredox dual catalysis allowed the critical C-C bond to be formed in good yield. Likewise, ring closing alkyne metathesis (RCAM) worked well in the presence of the unhindered pyridine despite the innately Lewis acidic Mo(+6) center of the alkylidyne catalyst. Finally, an iridium catalyzed hydrosilylation was uniquely effective in reducing a tertiary amide without compromising an adjacent pyridine and the lateral double bonds; this transformation is largely without precedent. The second strained macrocycle enveloping the core was closed by intramolecular N-alkylation with formation of the pyridinium unit; the reaction proceeded site- and chemoselectively in the presence of an a priori more basic tertiary amine.