Tailoring tea residue-derived nitrogen-doped activated carbon for CO2 adsorption: influence of activation temperature and activating agents

Embracing CO2 mitigation strategies, such as state-of-the-art CO2 capture technologies, is essential for effectively reducing atmospheric carbon levels and advancing global efforts toward a more sustainable future. In this context, adsorption sequestering techniques utilising carbon materials have emerged as promising candidates for CO2 capture. These materials have been extensively researched with a range of tuning methods to optimise their physicochemical features. In this study, an alteration of the N-doped activated carbon was successfully performed, utilizing tea residue as the carbon precursor and ammonia as the nitrogen source, facilitated through an impregnation procedure. With the objective of discovering the effect of diverse activation parameters on prepared adsorbent physicochemical properties, several selections of activating agents (AA) were investigated: KOH, H3PO4, ZnCl2, and NaOH, together with broad thermal activation temperature from 873 to 1173 K. The best-performed adsorbents from the respective AC group were subjected to several characterisation analyses and found to the enhanced structural features, heteroatom doped-rich surface (i.e. N and O); together with AA-induced metal/mineral functionalization, the NaOH-used AC (NAC-N-1173) was the optimum-performed adsorbent with a promising 4.12 mmol/g CO2 uptake capacity, higher than other prepared adsorbent including N-doped tea residue-derived char and commercialized AC with 175 and 325% higher, respectively.

Kinetics and Thermodynamics Study of Methylene Blue Adsorption to Sucrose- and Urea-Derived Nitrogen-Enriched, Hierarchically Porous Carbon Activated by KOH and H3PO4

Hierarchically porous nitrogen-enriched carbon materials synthesized by polymerization of sucrose and urea (SU) were activated by KOH and H₃PO₄ (SU-KOH and SU-H₃PO₄, respectively). Characterization was undertaken and the synthesized materials were tested for their ability to adsorb methylene blue (MB). Scanning electron microscopic images along with the Brunauer-Emmett-Teller (BET) surface area analysis revealed the presence of a hierarchically porous system. X-ray photoelectron spectroscopy (XPS) confirms the surface oxidation of SU upon activation with KOH and H₃PO₄. The best conditions for removing dyes utilizing both activated adsorbents were determined by varying the pH, contact time, adsorbent dosage, and dye concentration. Adsorption kinetics were evaluated, and the adsorption of MB followed second-order kinetics, suggesting the chemisorption of MB to both SU-KOH and SU-H₃PO₄. Times taken to reach the equilibrium by SU-KOH and SU-H₃PO₄ were 180 and 30 min, respectively. The adsorption isotherm data were fitted to the Langmuir, Freundlich, Temkin, and Dubinin models. Data were best described by the Temkin isotherm model for SU-KOH and the Freundlich isotherm model for SU-H₃PO₄. Thermodynamics of the adsorption of MB to the adsorbent was determined by varying the temperature in the range of 25-55 °C. Adsorption of MB increased with increasing temperature, suggesting that the adsorption process is endothermic. The highest adsorption capacities of SU-KOH and SU-H₃PO₄ (1268 and 897 mg g^-1, respectively) were obtained at 55 °C. Synthesized adsorbents were effective in removing MB for five cycles with some loss in activity. The results of this study show that SU activated by KOH and H₃PO₄ are environmentally benign, favorable, and effective adsorbents for MB adsorption.

Plant-Biomass-Derived Carbon Materials as Catalyst Support, A Brief Review

Carbon materials are widely used in catalysis as effective catalyst supports. Carbon supports can be produced from coal, organic precursors, biomass, and polymer wastes. Biomass is one of the promising sources used to produce carbon-based materials with a high surface area and a hierarchical structure. In this review, we briefly discuss the methods of biomass-derived carbon supported catalyst preparation and their application in biodiesel production, organic synthesis reactions, and electrocatalysis.

Synthesis and performance of a cathode catalyst derived from areca nut husk in microbial fuel cell

The role of the cathode catalyst is crucial in a single chamber Microbial Fuel Cell (MFC) to overcome the energy barrier. The present work aims todevelop a metal-free cathode catalyst from anagro-waste, areca nut husk and to evaluate its performance in MFC. Activated carbon with amorphous graphitic structure was synthesised at a pyrolysis temperature of 500 °C from the areca nut husk. The surface area of activated carbon is 1261.6 m²/g with an average particle size of 35.23 μm. The electrochemical characterisation of the cathode in oxygen saturated atmosphere reveals, a loading rate of 5 mg/cm² possesses an equivalent conductivity to that of Pt catalyst. An Open Circuit voltage of 864 mV with a power density of 590 mW/m² and a current density of 1.03517 A/m² at 611.8 Ω was obtained. These results make the novel metal free catalyst a potential alternative to metal-based catalysts.

Pyridinic nitrogen dominated doping on Pd/carbon catalysts for enhanced hydrogenation performance

The hydrogenation of 4-carboxylbenzaldehyde over Pd catalysts is a crucial process during the production of pure terephthalic acid. Herein, ZIF-8 derived carbon materials (NC) with adjustable N types were synthesized and used as the supports of Pd catalysts. Pd supported on NC with 50.5% of pyridinic N exhibited best hydrogenation activity with a TOF value of 4.1 min-1. The microstructures of NC support and electronic structures of Pd in Pd/NC were investigated by techniques such as XRD, N2 physisorption, XPS, H2-O2 titration and TEM. The nitrogen species in CN surface not only can adjust chemical state and dispersion of Pd nanoparticles (NPs), but also promote the adsorption and activation capability of H2 molecular. Besides, the ratio of Pd0/Pd2+ and Pd dispersion were closely correlated with pyridinic nitrogen content. The improvement in hydrogenation activity and stability of Pd/CN catalyst in relative to Pd/C were ascribed to the synergistic effect of pyridinic nitrogen and active site Pd0.

Nitrogen-doped carbon derived from horse manure biomass as a catalyst for the oxygen reduction reaction

A massive amount of animal biomass is generated daily from livestock farms, agriculture, and food industries, causing environmental and ecological problems. The conversion of animal biomass into value-added products has recently gained considerable interest in materials science research. Herein, horse manure (HM) was utilized as a precursor for synthesizing nitrogen-doped carbons (NCs) via hydrothermal ammonia treatment and the post pyrolysis process. The ammonia concentration varied between 0.5, 1.0, and 1.5 M in the hydrothermal process. From the comprehensive characterization results, horse manure-derived nitrogen-doped carbons (HMNCs) exhibited an amorphous phase and a hierarchical nanoporous structure. The specific surface area decreased from 170.1 to 66.6 m2 g-1 as the ammonia concentration increased due to micropore deterioration. The nitrogen content was 0.90 atom% even with no ammonia treatment, indicating self-nitrogen doping. With hydrothermal ammonia treatment, the nitrogen content slightly enhanced up to 1.54 atom%. The electrocatalytic activity for the oxygen reduction reaction (ORR) of HMNCs in an alkaline solution was found to be related to nitrogen doping content and porous structure. The ORR activity of HMNCs mainly proceeded via a combination of two- and four-electron pathways. Although the ORR activity of HMNCs was still not satisfactory and comparable to that of a commercial Pt/carbon catalyst, it showed better long-term durability. The results obtained in this work provide the potential utilization of HM as a precursor for ORR catalysts and other related applications.

Heteroatom-Doped Metal-Free Carbon Nanomaterials as Potential Electrocatalysts

In recent years, heteroatom-incorporated specially structured metal-free carbon nanomaterials have drawn huge attention among researchers. In comparison to the undoped carbon nanomaterials, heteroatoms such as nitrogen-, sulphur-, boron-, phosphorous-, etc., incorporated nanomaterials have become well-accepted as potential electrocatalysts in water splitting, supercapacitors and dye-sensitized solar cells. This review puts special emphasis on the most popular synthetic strategies of heteroatom-doped and co-doped metal-free carbon nanomaterials, viz., chemical vapor deposition, pyrolysis, solvothermal process, etc., utilized in last two decades. These specially structured nanomaterials' extensive applications as potential electrocatalysts are taken into consideration in this article. Their comparative enhancement of electrocatalytic performance with incorporation of heteroatoms has also been discussed.

Nanosheets with High-Performance Electrochemical Oxygen Reduction Reaction Revived from Green Walnut Peel

The synthesis of metal-free carbon-based electrocatalysts for oxygen reduction reactions (ORR) to replace conventional Pt-based catalysts has become a hot spot in current research. This work proposes an activation-assisted carbonization strategy, to manufacture N-doped ultra-thin carbon nanosheets (GWS180M800) with high catalytic activity, namely, melamine is used as an accelerator/nitrogen source, and walnut green peels biological waste as a carbon source. The melamine acts as a nitrogen donor in the hydrothermal process, effectively enhancing the nitrogen doping rate. The content of pyridine nitrogen groups accounts for up to 48.5% of the total nitrogen content. Electrochemical tests show that the GWS180M800 has excellent ORR electrocatalytic activity and stability, and makes a quasi-four-electron ORR pathway clear in the alkaline electrolyte. The initial potential and half slope potential are as high as 1.01 and 0.82 V vs. RHE, respectively. The GWS180M800 catalyst has a better ability to avoid methanol cross poisoning than Pt/C has. Compared with 20 wt% Pt/C, GWS180M800 has improved methanol tolerance and stability. It is a metal-free biochar ORR catalyst with great development potential and application prospects. This result provides a new space for the preparation of valuable porous nano-carbon materials based on carbonaceous solid waste and provides new ideas for catalyzing a wide range of electrochemical reactions in the future.

Animal Silk-Derived Amorphous Carbon Fibers for Electricity Generation and Solar Steam Evaporation

Animal silk-derived carbon materials are of interest to various applications, such as smart cloth and wearable sensors. However, it remains a challenge to massively transform silks into continuous carbon fibers. In this work, carbon fibers based on two kinds of animal silks, i.e., Bombyx mori (B. mori) silk and Antheraea pernyi (A. pernyi) silk, are prepared by using a large-scale-capable one-step heating process without any additives or activation process. These carbon fibers and yarns are electroconductive and mechanically robust. To expand the application of these carbonized silks, we further weaved them with cotton yarns to obtain composite fabrics with different textures and evaluated their performance for solar steam evaporation. Our results confirmed that the advantages of these composite fabrics in light absorption, large surface area, and hierarchical liquid transport channels allowed them to be used as a solar steam generation for desalination and sewage treatment. In addition, we reported that these conductive carbon fibers could be assembled into fluidic nanogenerators to generate electricity from the water flow. This work is expected to guide a large-scale preparation and use of animal silk-derived amorphous carbon fibers.

Harnessing inherently hierarchical microstructures of plant biomass to construct three-dimensional nanoporous nitrogen-doped carbons as efficient and durable oxygen reduction electrocatalysts

Exploiting the natural structures of plants to prepare high-performance carbon-based electrocatalysts is highly desirable. Herein, the inherently hierarchical microstructures of Euphorbia tirucalli (E. tirucalli) are employed to construct three-dimensional nanoporous nitrogen-doped carbons that act as efficient and durable electrocatalysts towards the oxygen reduction reaction (ORR). During the preparation process, agar is used in order to reduce the dissipation of nitrogen and to protect the fine structures of E. tirucalli. The as-prepared ORR catalyst, with a high density of pyridinic and graphitic nitrogens, presents a high catalytic activity (onset potential of 0.97 V vs. RHE, half-wave potential of 0.82 V vs. RHE, limiting current density of 5.64 mA cm-2 and Tafel slope of 59 mV dec-1), four-electron pathway, low peroxide yield, long-term stability (current retention of 95.3% after 50 000 s) and strong methanol tolerance in 0.1 M KOH, all superior to the benchmark 20% Pt/C commercial catalyst. This work demonstrates an effective method for the utilization of inherently hierarchical microstructures of plant biomass to make efficient and durable carbon-based metal-free ORR electrocatalysts.

Recent Advances in Carbon-Based Metal-Free Electrocatalysts

Precious noble metals (such as Pt, Ir) and nonprecious transition metals (e.g., Fe, Co), including their compounds (e.g., oxides, nitrides), have been widely investigated as efficient catalysts for energy conversion, energy storage, important chemical productions, and many industrial processes. However, they often suffer from high cost, low selectivity, poor durability, and susceptibility to gas poisoning with adverse environmental issues. As a low-cost alternative, the first carbon-based metal-free catalyst (C-MFC based on N-doped carbon nanotubes) was discovered in 2009. Since then, various C-MFCs have been demonstrated to show similar or even better catalytic performance than their metal-based counterparts, attractive energy conversion and storage (e.g., fuel cells, metal-air batteries, water splitting), environmental remediation, and chemical production. Enormous progress has been achieved while the number of publications still rapidly increases every year. Herein, a critical overview of the very recent advances in this rapidly developing field during the last couple of years is presented.

Salt-induced silk gel-derived N and trace Fe co-doped 3D porous carbon as an oxygen reduction catalyst in microbial fuel cells

Inexpensive and high-efficiency oxygen reduction reaction (ORR) catalysts play a significant role in achieving practical applications of microbial fuel cells (MFCs). Hence, herein, novel nitrogen (N) and trace iron (Fe) co-doped three-dimensional (3D) porous carbon (NFe_x-C) was synthesized as an excellent ORR catalyst from an interesting salt-induced silk gel, which was beneficial to the spontaneously formation of porosity and boosted the ORR activity. Among the series of NFe_x-C, NFe_0.5-C (1.20% N-ORR/C, 0.07 at% Fe) possessed a higher specific surface area (538.94 m² g^-1) and pore volume (2.158 cm³ g^-1). Note that NFe_0.5-C exhibited a significantly higher positive initial potential (0.274 V vs. Ag/AgCl) and half-wave potential (0.095 V vs. Ag/AgCl) than other catalysts and commercial Pt/C (20 wt%); this implied that it possessed prominent ORR catalytic activity. In the MFC tests, the output-voltage and maximum power density of NFe_0.5-C were enhanced to 517.37 ± 7.87 mV and 605.35 ± 15.39 mW m^-2, respectively. Moreover, NFe_0.5-C (0.15 $ g^-1) exhibits excellent anti-poisoning ability and is thousands of times cheaper than commercial Pt/C (20 wt%, 220.04 $ g^-1); therefore, NFe_0.5-C should be a prospective catalyst to substitute precious commercial Pt/C in MFCs and even for application in other types of fuel cells.

Sustainable Carbonaceous Materials Derived from Biomass as Metal-Free Electrocatalysts

Although carbon is the second most abundant element in the biosphere, a large proportion of the available carbon resources in biomass from agriculture, stock farming, ocean fisheries, and other human activities is currently wasted. The use of sustainable carbonaceous materials as an alternative to precious metals in electrocatalysis is a promising pathway for transforming sustainable biomass resources into sustainable energy-conversion systems. The development of rational syntheses of metal-free carbonaceous catalysts derived from sustainable biomass has therefore become a topic of significant interest in materials chemistry. However, great efforts are still required to develop methods that are low cost, scalable, and environmentally friendly and which afford carbonaceous materials having an electrocatalytic performance comparable to, or even better than, existing precious metal catalysts. Herein, recent achievements in developing metal-free carbonaceous catalysts based on biomass are reviewed and discussed and the critical issues which still need to be addressed are highlighted. The focus is on representative synthesis and optimization strategies applicable to different kinds of biomass, as well as studies of the physicochemical structure and electrochemical performance of the resulting metal-free carbonaceous catalysts. Finally, some guidelines for the future development of this important area are provided.

Kinetics, equilibrium, statistical surface modeling and cost analysis of paraquat removal from aqueous solution using carbonated jujube seed

This paper reports the removal of paraquat from an aqueous solution using prepared carbonated jujube seed (JS/HSO-700). JS/HSO-700 was characterized by XPS, TGA, FTIR, N₂ physisorption, SEM, and Raman techniques. FTIR revealed the presence of active species on the JS/HSO-700 surface. The removal rate of paraquat was investigated as a function of multiple operational factors such as contact time, adsorbent dose and solution pH. Adsorption mechanism was fully investigated based on FTIR, Raman, and BET analyses before and after adsorption. Response surface methodology modeling using central composite design was performed to statistically optimize the adsorption conditions. The experimental paraquat removal efficiency was found to be 96.7 ± 2.02%, whereas the predicted value of the model was 94.31 ± 4.43%, showing that the predicted model values are in good agreement with the experimental value. Finally, cost analysis was performed to confirm the cost of the adsorbent based on energy consumption and reagent costs.

This paper reports the removal of paraquat from an aqueous solution using prepared carbonated jujube seed (JS/HSO-700).

Advanced Biomass-Derived Electrocatalysts for the Oxygen Reduction Reaction

Recent progress in advanced nanostructures synthesized from biomass resources for the oxygen reduction reaction (ORR) is reviewed. The ORR plays a significant role in the performance of numerous energy-conversion devices, including low-temperature hydrogen and alcohol fuel cells, microbial fuel cells, as well as metal-air batteries. The viability of such fuel cells is strongly related to the cost of the electrodes, especially the cathodic ORR electrocatalyst. Hence, inexpensive and abundant plant and animal biomass have become attractive options to obtain electrocatalysts upon conversion into active carbon. Bioresource selection and processing criteria are discussed in light of their influence on the physicochemical properties of the ORR nanostructures. The resulting electrocatalytic activity and durability are introduced and compared to those from conventional Pt/C-based electrocatalysts. These ORR catalysts are also active for oxygen or hydrogen evolution reactions.

Improvement of O2 adsorption for α-MnO2 as an oxygen reduction catalyst by Zr4+ doping

Zr4+ doped α-MnO2 nanowires were successfully synthesized by a hydrothermal method. XRD, SEM, TEM and XPS analyses indicated that Mn3+ ions, Mn4+ ions, Mn4+δ ions and Zr4+ ions co-existed in the crystal structure of synthesized Zr4+ doped α-MnO2 nanowires. Zr4+ ions occupied the positions originally belonging to elemental manganese in the crystal structure and resulted in a mutual action between Zr4+ ions and Mn3+ ions. The mutual action made Mn3+ ions tend to lose their electrons and Zr4+ ions tend to get electrons. Cathodic polarization analyses showed that the electrocatalytic activity of α-MnO2 for oxygen reduction reaction (ORR) was remarkably improved by Zr4+ doping and the Zr/Mn molar ratio notably affected the ORR performance of the air electrodes prepared by Zr4+ doped α-MnO2 nanowires. The highest ORR current density of the air electrodes prepared by Zr4+ doped α-MnO2 nanowires in alkaline solution appeared at Zr/Mn molar ratio of 1 : 110, which was 23% higher than those prepared by α-MnO2 nanowires. EIS analyses indicated that the adsorption process of O2 molecules on the surface of the air electrodes prepared by Zr4+ doped α-MnO2 nanowires was the rate-controlling step for ORR. The DFT calculations revealed that the mutual action between Zr4+ and Mn3+ in Zr4+ doped α-MnO2 nanowires enhanced the adsorption process of O2 molecules.

Electrospinning Preparation of Nanostructured g-C3N4/BiVO4 Composite Films with an Enhanced Photoelectrochemical Performance

Nanostructured g-C₃N₄/BiVO₄ composite films with an enhanced photoelectrochemical (PEC) performance have been fabricated via the facile electrospinning technique. The g-C₃N₄ nanosheets can not only form heterojunctions with BiVO₄ but also prevent the agglomeration of BiVO₄, helping the formation of nanostructures. The as-prepared g-C₃N₄/BiVO₄ films exhibit good coverage and stability. The PEC performance of the g-C₃N₄/BiVO₄ films is much more enhanced compared with that for individual BiVO₄ films because of the enhanced electron-hole separation. The photocurrent density is 0.44 mA/cm² for g-C₃N₄/BiVO₄ films at 0.56 V in the linear sweep current-voltage test, over 10 times higher than that of individual BiVO₄ films (0.18 mA/cm²). The effects of the preparation conditions including the g-C₃N₄ content, collector temperature, calcination temperature, and electrospinning time on the PEC performance were investigated, and the reasons for the effects were proposed. The optimal preparation condition was with 3.9 wt % g-C₃N₄ content in the electrospinning precursor, 185 °C collector temperature, 450 °C calcination temperature, and 40 min electrospinning time. The excellent PEC performance and the facile preparation method suggest that the g-C₃N₄/BiVO₄ films are good candidates in energy and environmental remediation area.