Influence of Physicochemical Properties of Iron Oxide Nanoparticles on Their Antibacterial Activity

The increasing occurrence of infectious diseases caused by antimicrobial resistance organisms urged the necessity to develop more potent, selective, and safe antimicrobial agents. The unique magnetic and tunable properties of iron oxide nanoparticles (IONPs) make them a promising candidate for different theragnostic applications, including antimicrobial agents. Though IONPs act as a nonspecific antimicrobial agent, their antimicrobial activities are directly or indirectly linked with their synthesis methods, synthesizing precursors, size, shapes, concentration, and surface modifications. Alteration of these parameters could accelerate or decelerate the production of reactive oxygen species (ROS). An increase in ROS role production disrupts bacterial cell walls, cell membranes, alters major biomolecules (e.g., lipids, proteins, nucleic acids), and affects metabolic processes (e.g., Krebs cycle, fatty acid synthesis, ATP synthesis, glycolysis, and mitophagy). In this review, we will investigate the antibacterial activity of bare and surface-modified IONPs and the influence of physiochemical parameters on their antibacterial activity. Additionally, we will report the potential mechanism of IONPs' action in driving this antimicrobial activity.

Development of a fast and simple method for the isolation of superparamagnetic iron oxide nanoparticles protein corona from protein-rich matrices

The adsorption of proteins onto the surface of nanoparticle (NP) leads to the formation of the so-called "protein corona" as consisting both loosely and tightly bound proteins. It is well established that the biological identity of NPs that may be acquired after exposure to a biological matrix is mostly provided by the components of the hard corona as the pristine surface is generally less accessible for binding. For that reason, the isolation and the characterisation of the NP-corona complexes and identification of the associated biomolecules can help in understanding its biological behaviour. Established methods for the isolation of the NP-HC complexes are time-demanding and can lead to different results based on the isolation method applied. Herein, we have developed a fast and simple method using ferromagnetic beads isolated from commercial MACS column and used for the isolation of superparamagnetic NP following exposure to different types of biological milieu. We first demonstrated the ability to easily isolate superparamagnetic iron oxide NPs (IONPs) from different concentrations of human blood plasma, and also tested the method on the corona isolation using more complex biological matrices, such as culture medium containing pulmonary mucus where the ordinary corona methods cannot be applied. Our developed method showed less than 20% difference in plasma corona composition when compared with centrifugation. It also showed effective isolation of NP-HC complexes from mucus-containing culture media upon comparing with centrifugation and MACS columns, which failed to wash out the unbound proteins. Our study was supported with a full characterisation profile including dynamic light scattering, nanoparticle tracking analysis, analytical disk centrifuge, and zeta potentials. The biomolecules/ proteins composing the HC were separated by vertical gel electrophoresis and subsequently analysed by liquid chromatography-tandem mass spectrometry. In addition to our achievements in comparing different isolation methods to separate IONPs with corona from human plasma, this is the first study that provides a complete characterisation profile of particle protein corona after exposure in vitro to pulmonary mucus-containing culture media.

Local Temperature Increments and Induced Cell Death in Intracellular Magnetic Hyperthermia

The generation of temperature gradients on nanoparticles heated externally by a magnetic field is crucially important in magnetic hyperthermia therapy. But the intrinsic low heating power of magnetic nanoparticles, at the conditions allowed for human use, is a limitation that restricts the general implementation of the technique. A promising alternative is local intracellular hyperthermia, whereby cell death (by apoptosis, necroptosis, or other mechanisms) is attained by small amounts of heat generated at thermosensitive intracellular sites. However, the few experiments conducted on the temperature determination of magnetic nanoparticles have found temperature increments that are much higher than the theoretical predictions, thus supporting the local hyperthermia hypothesis. Reliable intracellular temperature measurements are needed to get an accurate picture and resolve the discrepancy. In this paper, we report the real-time variation of the local temperature on γ-Fe₂O₃ magnetic nanoheaters using a Sm³⁺/Eu³⁺ ratiometric luminescent thermometer located on its surface during exposure to an external alternating magnetic field. We measure maximum temperature increments of 8 °C on the surface of the nanoheaters without any appreciable temperature increase on the cell membrane. Even with magnetic fields whose frequency and intensity are still well within health safety limits, these local temperature increments are sufficient to produce a small but noticeable cell death, which is enhanced considerably as the magnetic field intensity is increased to the maximum level tolerated for human use, consequently demonstrating the feasibility of local hyperthermia.

Towards standardized purification of bacterial magnetic nanoparticles for future in vivo applications

Bacterial magnetosomes (MS) are well-defined membrane-enveloped single-domain iron oxide (magnetite) nanoparticles, which are susceptible to genetic and chemical engineering. Additionally, the possibility to manipulate these particles by external magnetic fields facilitates their application in biomedicine and biotechnology, e.g. as magnetic resonance imaging probes or for drug delivery purposes. However, current purification protocols are poorly characterized, thereby hampering standardized and reproducible magnetosome production and thus, reliable testing for in vivo applications. In that context, the establishment of reproducible particle isolation procedures as well as the identification of high quality control parameters and the evaluation of potential cytotoxic effects of purified particles are of major importance. In this study, we characterize a multi-step purification protocol for MS with regard to purity, iron content, size and polydispersity of magnetite particles. In addition, we address potential cytotoxic effects of isolated MS when incubated with mammalian cells. Overall, we provide a detailed overview of the process-structure relationship during the isolation of MS and thus, identify prerequisites for high-yield MS production and their future application in the biomedical and biotechnological field. STATEMENT OF SIGNIFICANCE: Magnetic nanoparticles are of increasing interest for a variety of biomedical and biotechnological applications. Due to their unprecedented material characteristics, bacterial magnetosomes represent a promising alternative to chemically synthesized iron oxide nanoparticles. As applications require well-defined, highly purified and fully characterized nanoparticles, reliable protocols are necessary for efficient and reproducible magnetosome isolation. In our study, we evaluate an improved magnetosome extraction procedure and monitor quality parameters such as particle size distribution, membrane integrity and purity of the suspension by a combination of physicochemical and biochemical methods. Furthermore, the cytotoxicity of the isolated magnetosomes is assessed using different cell lines. In summary, our study helps to establish prerequisites for many real-world applications of magnetosomes in the field of biotechnology and biomedicine.

Coating Effect on the 1H-NMR Relaxation Properties of Iron Oxide Magnetic Nanoparticles

We present a ¹H Nuclear Magnetic Resonance (NMR) relaxometry experimental investigation of two series of magnetic nanoparticles, constituted of a maghemite core with a mean diameter d_TEM = 17 ± 2.5 nm and 8 ± 0.4 nm, respectively, and coated with four different negative polyelectrolytes. A full structural, morpho-dimensional and magnetic characterization was performed by means of Transmission Electron Microscopy, Atomic Force Microscopy and DC magnetometry. The magnetization curves showed that the investigated nanoparticles displayed a different approach to the saturation depending on the coatings, the less steep ones being those of the two samples coated with P(MAA-stat-MAPEG), suggesting the possibility of slightly different local magnetic disorders induced by the presence of the various polyelectrolytes on the particles’ surface. For each series, ¹H NMR relaxivities were found to depend very slightly on the surface coating. We observed a higher transverse nuclear relaxivity, r₂, at all investigated frequencies (10 kHz ≤ ν_L ≤ 60 MHz) for the larger diameter series, and a very different frequency behavior for the longitudinal nuclear relaxivity, r₁, between the two series. In particular, the first one (d_TEM = 17 nm) displayed an anomalous increase of r₁ toward the lowest frequencies, possibly due to high magnetic anisotropy together with spin disorder effects. The other series (d_TEM = 8 nm) displayed a r₁ vs. ν_L behavior that can be described by the Roch’s heuristic model. The fitting procedure provided the distance of the minimum approach and the value of the Néel reversal time (τ ≈ 3.5 ÷ 3.9·10⁻⁹ s) at room temperature, confirming the superparamagnetic nature of these compounds.

Magnetic hyperthermia with ε-Fe2O3 nanoparticles

Biocompatibility restrictions have limited the use of magnetic nanoparticles for magnetic hyperthermia therapy to iron oxides, namely magnetite (Fe₃O₄) and maghemite (γ-Fe₂O₃). However, there is yet another magnetic iron oxide phase that has not been considered so far, in spite of its unique magnetic properties: ε-Fe₂O₃. Indeed, whereas Fe₃O₄ and γ-Fe₂O₃ have a relatively low magnetic coercivity, ε-Fe₂O₃ exhibits a giant coercivity. In this report, the heating power of ε-Fe₂O₃ nanoparticles in comparison with γ-Fe₂O₃ nanoparticles of similar size (∼20 nm) was measured in a wide range of field frequencies and amplitudes, in uncoated and polymer-coated samples. It was found that ε-Fe₂O₃ nanoparticles primarily heat in the low-frequency regime (20-100 kHz) in media whose viscosity is similar to that of cell cytoplasm. In contrast, γ-Fe₂O₃ nanoparticles heat more effectively in the high frequency range (400-900 kHz). Cell culture experiments exhibited no toxicity in a wide range of nanoparticle concentrations and a high internalization rate. In conclusion, the performance of ε-Fe₂O₃ nanoparticles is slightly inferior to that of γ-Fe₂O₃ nanoparticles in human magnetic hyperthermia applications. However, these ε-Fe₂O₃ nanoparticles open the way for switchable magnetic heating owing to their distinct response to frequency.

Yttrium-Doped Iron Oxide Nanoparticles for Magnetic Hyperthermia Applications

Magnetic nanoparticles of Fe₃O₄ doped by different amounts of Y³⁺ (0, 0.1, 1, and 10%) ions were designed to obtain maximum heating efficiency in magnetic hyperthermia for cancer treatment. Single-phase formation was evident by X-ray diffraction measurements. An improved magnetization value was obtained for the Fe₃O₄ sample with 1% Y³⁺ doping. The specific absorption rate (SAR) and intrinsic loss of power (ILP) values for prepared colloids were obtained in water. The best results were estimated for Fe₃O₄ with 0.1% Y³⁺ ions (SAR = 194 W/g and ILP = 1.85 nHm²/kg for a magnetic field of 16 kA/m with the frequency of 413 kHz). The excellent biocompatibility with low cell cytotoxicity of Fe₃O₄:Y nanoparticles was observed. Immediately after magnetic hyperthermia treatment with Fe₃O₄:0.1%Y, a decrease in 4T1 cells' viability was observed (77% for 35 μg/mL and 68% for 100 μg/mL). These results suggest that nanoparticles of Fe₃O₄ doped by Y³⁺ ions are suitable for biomedical applications, especially for hyperthermia treatment.

Methods of protein corona isolation for magnetic nanoparticles

Nanoparticles (NPs) in contact with a biological environment get covered by proteins and some are loosely bound and some are tightly bound. The latter form a hard protein corona (HPC) which is known to determine their biological behavior. Therefore, in order to study the biological behaviour of NPs one needs to start from the HPC. However, established methods and standards of HPC isolation are still not known. This is especially a challenge in the case of magnetic NPs which form a major branch of nanomedicine. Therefore, we developed a novel HPC isolation method, a multi-step centrifugation method (MSCM), for single-domain magnetic NPs. The MSCM was applied to iron oxide NPs in interaction with human blood and lymph serum with different dilutions in triplicate. The analysis of the composition of the obtained HPCs showed the reproducibility of the MSCM. This new method was also compared with the existing magnetic separation method (MagSep) and a study of the obtained HPC allowed us to establish the validity limits of MagSep and MSCM on only superparamagnetic NPs and on any single-domain magnetic NPs, respectively. Surprisingly, the HPCs obtained by these two isolation methods were quite different, up to 50%, suggesting that only these proteins, which are found in the HPCs of both isolation methods, are in fact real HPCs.

Advances in Magnetic Nanoparticles for Biomedical Applications

Magnetic nanoparticles (NPs) are emerging as an important class of biomedical functional nanomaterials in areas such as hyperthermia, drug release, tissue engineering, theranostic, and lab-on-a-chip, due to their exclusive chemical and physical properties. Although some works can be found reviewing the main application of magnetic NPs in the area of biomedical engineering, recent and intense progress on magnetic nanoparticle research, from synthesis to surface functionalization strategies, demands for a work that includes, summarizes, and debates current directions and ongoing advancements in this research field. Thus, the present work addresses the structure, synthesis, properties, and the incorporation of magnetic NPs in nanocomposites, highlighting the most relevant effects of the synthesis on the magnetic and structural properties of the magnetic NPs and how these effects limit their utilization in the biomedical area. Furthermore, this review next focuses on the application of magnetic NPs on the biomedical field. Finally, a discussion of the main challenges and an outlook of the future developments in the use of magnetic NPs for advanced biomedical applications are critically provided.

Neglected nano-effects of nanoparticles in the interpretation of their toxicity

Considering the traditional mass, concentration, or surface area of nanoparticles can affect the conclusions drawn from cell viability tests about the toxicity of nanoparticles.

ATP and NADPH coated iron oxide nanoparticles for targeting of highly metabolic tumor cells

The metabolic activity of tumor cells is known to be higher as compared to that of normal cells, which has been previously exploited to deliver nanomedicines to highly metabolic tumor cells. Unfortunately, current strategies, which are mostly based on complex energy sources, such as sugars, showed insufficient accumulation at the target sites. We here report the coating of IONPs with two essential units of cellular metabolism: adenosine triphosphate (ATP) and nicotinamide adenine dinucleotide phosphate (NADPH). ATP and NADPH were directly bound to the IONPs' surface using a simple aqueous method. Both molecules were used as coatings, i.e. as stabilizing agents, but also simultaneously as targeting molecules to deliver IONPs to highly metabolic tumor cells. Indeed, we found that the uptake of ATP-IONPs and NADPH-IONPs is correlated with the metabolic activity of tumor cells, especially regarding their cellular ATP levels and NADPH consumption. We also measured one of the highest MRI r₂ relaxivities for both ATP-IONPs and NADPH-IONPs. With the direct coating of IONPs with ATP and NADPH, we therefore provide an optimal platform to stabilize IONPs and at the same time promising properties for the targeting and detection of highly metabolic tumor cells.

Tuning Properties of Iron Oxide Nanoparticles in Aqueous Synthesis without Ligands to Improve MRI Relaxivity and SAR

Aqueous synthesis without ligands of iron oxide nanoparticles (IONPs) with exceptional properties still remains an open issue, because of the challenge to control simultaneously numerous properties of the IONPs in these rigorous settings. To solve this, it is necessary to correlate the synthesis process with their properties, but this correlation is until now not well understood. Here, we study and correlate the structure, crystallinity, morphology, as well as magnetic, relaxometric and heating properties of IONPs obtained for different durations of the hydrothermal treatment that correspond to the different growth stages of IONPs upon initial co-precipitation in aqueous environment without ligands. We find that their properties were different for IONPs with comparable diameters. Specifically, by controlling the growth of IONPs from primary to secondary particles firstly by colloidal and then also by magnetic interactions, we control their crystallinity from monocrystalline to polycrystalline IONPs, respectively. Surface energy minimization in the aqueous environment along with low temperature treatment is used to favor nearly defect-free IONPs featuring superior properties, such as high saturation magnetization, magnetic volume, surface crystallinity, the transversal magnetic resonance imaging (MRI) relaxivity (up to r₂ = 1189 mM⁻¹·s⁻¹ and r₂/r₁ = 195) and specific absorption rate, SAR (up to 1225.1 W·g_Fe⁻¹).

Protein Corona: Impact of Lymph Versus Blood in a Complex In Vitro Environment

In biological environments, the surface of nanoparticles (NPs) are modified by protein corona (PC) that determines their biological behavior. Unfortunately, in vitro tests still give different PC than in vivo tests causing in vitro-in vivo discrepancy; hence, in vitro studies are not indicative for the NPs' behavior in vivo. Here is demonstrated that PC in vitro is strongly influenced by the type of extracellular fluid (ECF), blood or lymph, by their high and low flow conditions and transitions between ECFs, and a combination of these parameters. As a result, this in vitro study approaches fluidic and dynamic variations to which NPs are exposed in vivo: different ECF that NPs encounter first in different injection routes, different transitions in-between ECFs during circulation, and simultaneous change in the exposed flow in these transitions. The most-abundant proteins in PCs are found to be not the most abundant in ECFs, but those having high affinity for binding to the surface of NPs. Moreover, some proteins are differently abundant in PCs at different flows, which indicate force-promoted binding, catch bonds. These results suggest that future in vitro studies should consider more complex incubation conditions to improve the in vitro-in vivo consistency necessary for translational research.

Versatility of Pyridoxal Phosphate as a Coating of Iron Oxide Nanoparticles

Pyridoxal 5'-phosphate (PLP) is the most important cofactor of vitamin B₆-dependent enzymes, which catalyses a wide range of essential body functions (e.g., metabolism) that could be exploited to specifically target highly metabolic cells, such as tumour metastatic cells. However, the use of PLP as a simultaneous coating and targeting molecule, which at once provides colloidal stability and specific biological effects has not been exploited so far. Therefore, in this work iron oxide nanoparticles (IONPs) were coated by PLP at two different pH values to tune PLP bonding (e.g., orientation) at the IONP surface. The surface study, as well as calculations, confirmed different PLP bonding to the IONP surface at these two pH values. Moreover, the obtained PLP-IONPs showed different zeta potential, hydrodynamic radius and agglomeration state, and consequently different uptake by two metastatic-prostate-cancer cell lines (LnCaP and PC3). In LnCaP cells, PLP modified the morphology of IONP-containing intracellular vesicles, while in PC3 cells PLP impacted the amount of IONPs taken up by cells. Moreover, PLP-IONPs displayed high magnetic resonance imaging (MRI) r₂ relaxivity and were not toxic for the two studied cell lines, rendering PLP promising for biomedical applications. We here report the use of PLP simultaneously as a coating and targeting molecule, directly bound to the IONP surface, with the additional high potential for MRI detection.

Chelating agents as coating molecules for iron oxide nanoparticles

Iron oxide nanoparticles coated with chelating agents with different numbers of –COOH dentates (2 to 5) behave differently.

Assessment of nanoparticles’ safety: corrected absorbance-based toxicity test

A method to correct absorbance-based toxicity tests of nanoparticles by removing the absorbance contribution of nanoparticles to that test.

Folic acid on iron oxide nanoparticles: platform with high potential for simultaneous targeting, MRI detection and hyperthermia treatment of lymph node metastases of prostate cancer

Folic acid directly bound to the surface of iron oxide nanoparticles with simultaneously high targeting, MRI relaxivity and heating efficacy.