Sonophotocatalytic removal of organic dyes in real water environments using reusable BiSI@PVDF-HFP nanocomposite membranes

Focusing on the uncontrolled discharge of organic dyes, a known threat to human health and aquatic ecosystems, this work employs a dual-functional catalyst approach, by immobilizing a synthesized bismuth sulfur iodide (BiSI) into a poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) polymeric matrix for multifunctional water remediation. The resulting BiSI@PVDF nanocomposite membrane (NCM), with 20 wt% filler content, maintains a highly porous structure without compromising morphology or thermal properties. Demonstrating efficiency in natural pH conditions, the NCM removes nearly all Rhodamine B (RhB) within 1 h, using a combined sonophotocatalytic process. Langmuir and pseudo-second-order models describe the remediation process, achieving a maximum removal capacity (Qmax) of 72.2 mg/g. In addition, the combined sonophotocatalysis achieved a degradation rate ten and five times higher (0.026 min-1) than photocatalysis (0.002 min-1) and sonocatalysis (0.010 min-1). Furthermore, the NCM exhibits notable reusability over five cycles without efficiency losses and efficiencies always higher than 90%, highlighting its potential for real water matrices. The study underscores the suitability of BiSI@PVDF as a dual-functional catalyst for organic dye degradation, showcasing synergistic adsorption, photocatalysis, and sonocatalysis for water remediation.

Recent Developments in Porphyrin-Based Metal-Organic Framework Materials for Water Remediation under Visible-Light Irradiation

Access to clean drinking water is a basic requirement, and eliminating pollutants from wastewater is important for saving water ecosystems. The porous structure and surface characteristics of metal-organic frameworks (MOFs) can function as a perfect scaffold for removing toxic compounds from wastewater. Porphyrins are promising building blocks for constructing MOFs. Porphyrin-based metal-organic frameworks (P-MOFs) have been fabricated using porphyrin ligands, metal clusters, or ions. These materials can harvest light from a wide region of the solar spectrum, and their framework morphology and physicochemical properties can be controlled by changing their peripheral subunits or metal ions. These porous crystalline materials have generated interest because of their distinctive characteristics, including large permanent porosity, interesting surface morphology, broad conformational diversity, high photostability, and semiconducting nature. This article discusses the recent progress and usefulness of P-MOFs. The fabrication procedures of P-MOFs are discussed, followed by the adsorptive and photocatalytic removal of contaminants from wastewater. The relationships between the geometries of P-MOFs and their light-harvesting and charge-transfer mechanisms for the photocatalytic degradation of pollutants are highlighted. Finally, some future perspectives and obstacles in the photodegradation usage of P-MOFs are discussed, along with feasible research directions to standardize efficient photocatalysts for improved photodegradation for water treatment.

Simple and rapid determination of tartrazine in fake saffron using the metal organic framework (Fe SA MOF@CNF) by HPLC/PDA

The present study of a novel metal-organic framework containing Fe single atoms doped on electrospun carbon nanofibers (Fe SA-MOF@CNF) based on dispersive micro solid phase extraction (D-μ-SPE) using HPLC-PDA for detection tartrazine in fake saffron samples was designed. The Fe SA-MOF@CNF sorbent was extensively characterized through various techniques including N2 adsorption-desorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The specific area of surface of the sorbent was 577.384 m2/g. The study variables were optimized via the central composite design (CCD), which included a sorbent mass of 15 mg, a contact time of 6 min, a pH of 7.56, and a tartrazine concentration of 300 ng/ml. Under the optimum condition, the calibration curve of this method was linear in the range of 5-1000 ng/mL, with a correlation coefficient of 0.992. The LOD and LOQ values were ranged 0.38-0.74 and 1.34-2.42 ng/ml, respectively. This approach revealed significant improvements, including high extraction recovery (98.64), recovery rates (98.43-102.72%), and accuracy (RSDs < 0.75 to 3.6%). the enrichment factors were obtained in the range of 80.6-86.4 with preconcentration factor of 22.3. Consequently, the D-μ-SPE method based on synthesized Fe SA-MOF@CNF could be recommended as a sustainable sorbent for detecting tartrazine in saffron samples.

Adsorption of cationic/anionic dyes and endocrine disruptors by yeast/cyclodextrin polymer composites

Factory and natural wastewaters contain a wide range of organic pollutants. Therefore, multifunctional adsorbents must be developed that can purify wastewater. Phytic acid-cross-linked Baker's yeast cyclodextrin polymer composites (IBY-PA-CDP) were prepared using a one-pot method. IBY-PA-CDP was used to adsorb methylene blue (MB), bisphenol A (BPA), and methyl orange (MO). Studies on the ionic strength and strongly acidic ion salts confirmed that IBY-PA-CDP adsorbs MO through hydrophobic interactions. This also shows that Na+ was the direct cause of the increased MO removal. Adsorption studies on binary systems showed that MB/MO inhibited the adsorption of BPA by IBY-PA-CDP. The presence of MB increased the removal rate of MO by IBY-PA-CDP due to the bridging effect. The Langmuir isotherm model calculated the maximum adsorption capacities for MB and BPA to be 630.96 and 83.31 mg g-1, respectively. However, the Freundlich model is more suitable for fitting the experimental data for MO adsorption. To understand the rate-limiting stage of adsorption, a mass-transfer mechanism model was employed. The fitting results show that adsorption onto the active sites is the rate-determining step. After five regeneration cycles, IBY-PA-CDP could be reused with good stability and recyclability.

A Sustainable and Regenerative Process for the Treatment of Textile Effluents Using Nonphotocatalytic Water Splitting by Nanoporous Oxygen-Deficient Ferrite

Water is crucial for life. Being the world's third-largest industry, the textile industry pollutes 93 billion cubic meters of water each year. Only 28% of textile wastewater is treated by lower- to middle-income countries due to the costly treatment methods. The present work demonstrates the utilization of surface oxygen defects and nanopores in Mg0.8Li0.2Fe2O4 (Li-MgF) to treat textile effluents by a highly economical, scalable, and eco-friendly process. Nanoporous, oxygen-deficient Li-MgF splits water by a nonphotocatalytic process at room temperature to produce green electricity as hydroelectric cell. The adsorbent Li-MgF can be easily regenerated by heat treatment. A 70-90% reduction in the UV absorption intensity of adsorbent-treated textile effluents was observed by UV-visible spectroscopy. The oxygen defects on Li-MgF surface and nanopores were confirmed by X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller (BET) measurements, respectively. To analyze the adsorption mechanism, three known organic water-soluble dyes, brilliant green, crystal violet, and congo red, were treated with nanoporous Li-MgF. The dye decolorization efficiency of Li-MgF was recorded to be 99.84, 99.27, and 99.31% at 250 μM concentrations of brilliant green, congo red, and crystal violet, respectively. The results of Fourier transform infrared (FTIR) spectroscopy confirmed the presence of dyes on the material surface attached through hydroxyl groups generated by water splitting on the surface of the material. Total organic carbon analysis confirmed the removal of organic carbon from the dye solutions by 82.8, 77.0, and 46.5% for brilliant green, Congo red, and crystal violet, respectively. Based on the kinetic and isotherm models, the presence of a large number of surface hydroxyl groups on the surface of the material and OH- ions in solutions generated by water splitting was found to be responsible for the complete decolorization of all of the dyes. Adsorption of chemically diverse dyes by the nanoporous, eco-friendly, ferromagnetic, economic, and reusable Li-MgF provides a sustainable and easy way to treat textile industry effluents in large amounts.

Selective extraction of anionic and cationic dyes using tailored hydrophobic deep eutectic solvents

In this work, eight kinds of hydrophobic deep eutectic solvents (DESs), including four types of ionic and four types of non-ionic DESs, were prepared and applied in vortex-assisted liquid-liquid microextraction (LLME) technology. To explore the extraction ability of the hydrophobic DESs-based vortex-assisted LLME, four types of dyes were selected as analytes, involving anionic tartrazine (TA), amaranth (AM) and cationic phenosafranine (PF), methylene blue (MB). It turned out that the ionic and non-ionic hydrophobic DESs showed selective extraction on anionic and cationic dyes, respectively. In particular, the extraction efficiency of TA could reach 99.3 % when trioctylmethylammonium chloride-thymol ([TMAC][Thy]) was utilized as extraction agent. The partitioning efficiency of PF was up to 99.9 % by using decanoic acid-thymol ([DecA][Thy]) as extraction agent. The limits of detection (LODs) of TA and PF were 0.06 and 0.14 μg mL-1, respectively. The limits of quantification (LOQs) obtained for TA and PF were 0.20 and 0.47 μg mL-1, respectively. Besides, FT-IR and 1H NMR were utilized to investigate the extraction mechanism. The results demonstrated that the hydrogen bonding and electrostatic force were the main driving forces in the extraction process. Furthermore, through separating various anionic and cationic dyes, the selective extraction ability of [TMAC][Thy] and [DecA][Thy] were successfully verified. Hence, the feasible operation, high extraction efficiency and excellent selectivity make the developed hydrophobic DESs-based vortex-assisted LLME attractive in dyes separation.

Intermolecular interactions in mixed dye systems and the effects on dye wastewater treatment processes

Dye wastewater discharge is a critical concern across textiles, paper, cosmetics, and other industries. This study explores the impact of dye-dye interactions on chemical coagulation and ultrafiltration process. Using basic and reactive dyes, representing cationic and anionic compounds, the intricate interplay between these dyes was examined through spectroscopic analysis. Remarkably, interactions between dyes of opposite charges exhibited significant effects on both techniques. Electrostatic attractions played a key role. Positive coagulant hydrolysates selectively attracted negative dyes, while negatively charged membranes effectively captured positive dyes. Combining dyes with opposite charges resulted in enhanced removal efficiency, addressing challenging dyes collectively. This discovery offers a novel approach to improving dye removal, utilizing opposite-charged dye mixtures can tackle stubborn dyes unmanageable by conventional methods.

Visible light assisted photocatalytic degradation of mixture of reactive ternary dye solution by Zn-Fe co-doped TiO2 nanoparticles

The current study deals with the synthesis of novel Zn, and Fe co-doped TiO2 photocatalyst by the sol-gel method at room temperature. The prepared photocatalysts are characterized by several standard analytical tools. X-ray diffraction (XRD) and Raman analysis verifies the tetragonal anatase phase of TiO2 in all synthesized nanoparticles. The morphology and chemical composition of ZFT_2.5 were confirmed using the Field-Emission Scanning Electron Microscope (FE-SEM) and energy dispersive X-ray (EDAX) analysis respectively. X-ray photoelectron spectroscopy (XPS) measurements verify the binding energies of a host and dopant material. The High resolution transmission electron microscopy (HR-TEM) reveals the presence of spherical nanoparticles in ZFT_2.5 photocatalyst with a diameter ranging from 8 to 20 nm. The absorption spectra of the prepared nanoparticles exhibit strong absorption in visible light. The synergistic effect created by Zn and Fe blocked the light induced charge carriers and delayed the recombination probability. The photocatalyst ZFT_2.5 was tested for photocatalytic degradation against the mixture of the three cationic dyes [rhodamine B (RhB), malachite green (MG), and methylene blue (MB)] under exposure of visible light. Total organic carbon (TOC) study was performed to evaluate the organic character of the photodegradate dye solution.

Fabrication of porous adsorbent by quinoa husk stabilized foam templates for dye adsorption and carbonization for soil remediation

In this study, a novel adsorbent with a sufficient porous structure was fabricated using a green and highly stable water-based foam template. This template was stabilized with agricultural waste quinoa husk (QH) and applied to remove dye pollutants in wastewater. The porous adsorbent exhibited a high adsorption capacity of 740.95 mg/g for methylene blue and 1022.1 mg/g for methyl violet. The adsorption process was well described by the Langmuir-Freundlich model and the pseudo second-order kinetic model. A sustainable concept for handling the spent adsorbent was also proposed, involving its conversion into biochar and safe return to the soil. An additional benefit was observed, as the biochar effectively adjusted the physicochemical properties of the soil and improved crop growth with the addition of 1 wt%. The potential application of porous adsorbent in wastewater treatment and the reference of sustainable strategy for disposing of other adsorbents are both noteworthy.

Lignin-modified metal-organic framework as an effective adsorbent for the removal of methyl orange

Herein, lignin-modified metal-organic frameworks (NH2-UIO@L) are prepared using a one-step synthesis as sorbents for the removal of organic dyes from water. The introduction of lignin improved the adsorption sites. NH2-UIO@L2 adsorption of MO conforms to Langmuir model, and the adsorption capacity of NH2-UIO@L2 on MO was 214.13 mg·L-1 with an adsorption efficiency up to 99.28 %, which was significantly higher than values for other adsorbents. Due to hydrogen bonds, π-π interactions and electrostatic interactions, MO was effectively removed by NH2-UIO@L2 and its adsorption efficiency is maintained at 90.55 % after six cycles. The adsorption kinetics showed that the NH2-UIO@L2 adsorption of MO was chemical adsorption and controlled by intraparticle diffusion and external mass transfer. Further, the adsorption performance of NH2-UIO@L2 on MO and MB in mixed MO/MB solution was investigated. The adsorption capacity of NH2-UIO@L2 in mixed MO/MB solution was 207.04 mg·L-1 for MO and 243.31 mg·L-1 for MB; the adsorption of NH2-UIO@L2 on MO followed the Dubinin-Radushkevich and pseudo-second-order models, and the adsorption on MB followed the Temkin and pseudo-second-order models. Hydrogen bonds, π-π interactions, and pore filling are all implicated in the removal of MO and MB. In particular, the electrostatic attraction between MB and MO improves the adsorption efficiency of NH2-UIO@L2 on MB. NH2-UIO@L2 has good reusability, maintaining an adsorption efficiency of 97.66 % for MO and up to 99.15 % for MB after six cycles. Its simple preparation and superior adsorption suggest that NH2-UIO@L2 has considerable potential to remove organic dyes from wastewater.

Porous amorphous metal-organic frameworks based on heterotopic triangular ligands for iodine and high-capacity dye adsorption

The research on amorphous metal-organic frameworks (aMOFs) is still in its infancy, and designing and constructing aMOFs with functional pores remains a challenge. Two aMOFs based on Co(II) and heterotopic triangular ligands with large conjugated aromatic planes, namely aMOF-1 and aMOF-2, were constructed and characterized by IR, XPS, EA, ICP, XANS and so on. aMOF-1 possesses mesopores, whereas aMOF-2 possesses micropores. The porosity, conjugated aromatic plane and uncoordinated N atoms in the framework allow these aMOFs to adsorb iodine and dyes. The iodine adsorption capacity of aMOF-1 is 3.3 g per g, which is higher than that of aMOF-2 (0.56 g per g), mainly due to the expansion or swelling of aMOF-1 after iodine adsorption. The uptake of cationic dyes by aMOF-2 showed more rapid kinetics and a higher removal rate than that by aMOF-1, mainly due to the difference in the porosity and surface charge. Although the surface charges of aMOF-1 and aMOF-2 are negative, both of them showed significantly faster adsorption kinetics toward anionic dyes, among which methyl orange (MO) and Congo red (CR) can be removed in 5 min. This occurs possibly because the quick adsorption of Na+ ions alters the surface charge of the framework and promotes dye uptake. The adsorption capacities of aMOF-1 for MO and CR reached 921 and 2417 mg g-1, respectively. The correlation data for aMOF-2 are 1042 and 1625 mg g-1, respectively. All adsorption capacities are among the highest compared to many cMOFs. Adsorption in mixed dye solution is found to be charge-dependent, kinetic-dependent, and synergetic in these systems. The porosity, surface charge regulation during adsorption, weak interactions and multiple adsorption processes contribute to the dye adsorption performance.

Self-Assembling Peptide-Based Magnetogels for the Removal of Heavy Metals from Water

In this study, we present the synthesis of a novel peptide-based magnetogel obtained through the encapsulation of γ-Fe2O3-polyacrylic acid (PAA) nanoparticles (γ-Fe2O3NPs) into a hydrogel matrix, used for enhancing the ability of the hydrogel to remove Cr(III), Co(II), and Ni(II) pollutants from water. Fmoc-Phe (Fluorenylmethoxycarbonyl-Phenylalanine) and diphenylalanine (Phe2) were used as starting reagents for the hydrogelator (Fmoc-Phe3) synthesis via an enzymatic method. The PAA-coated magnetic nanoparticles were synthesized in a separate step, using the co-precipitation method, and encapsulated into the peptide-based hydrogel. The resulting organic/inorganic hybrid system (γ-Fe2O3NPs-peptide) was characterized with different techniques, including FT-IR, Raman, UV-Vis, DLS, ζ-potential, XPS, FESEM-EDS, swelling ability tests, and rheology. Regarding the application in heavy metals removal from aqueous solutions, the behavior of the obtained magnetogel was compared to its precursors and the effect of the magnetic field was assessed. Four different systems were studied for the separation of heavy metal ions from aqueous solutions, including (1) γ-Fe2O3NPs stabilized with PAA, (γ-Fe2O3NPs); (2) Fmoc-Phe3 hydrogel (HG); (3) γ-Fe2O3NPs embedded in peptide magnetogel (γ-Fe2O3NPs@HG); and (4) γ-Fe2O3NPs@HG in the presence of an external magnetic field. To quantify the removal efficiency of these four model systems, the UV-Vis technique was employed as a fast, cheap, and versatile method. The results demonstrate that both Fmoc-Phe3 hydrogel and γ-Fe2O3NPs peptide magnetogel can efficiently remove all the tested pollutants from water. Interestingly, due to the presence of magnetic γ-Fe2O3NPs inside the hydrogel, the removal efficiency can be enhanced by applying an external magnetic field. The proposed magnetogel represents a smart multifunctional nanosystem with improved absorption efficiency and synergic effect upon applying an external magnetic field. These results are promising for potential environmental applications of γ-Fe2O3NPs-peptide magnetogels to the removal of pollutants from aqueous media.

Production of single-component cellulose-based hydrogel and its utilization as adsorbent for aqueous contaminants

The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca²⁺), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants.

High-efficient and rapid removal of anionic and cationic dyes using a facile synthesized sole adsorbent NiAlFe-layered triple hydroxide (LTH)

It would be extremely momentous to familiarize a low-cost sole adsorbent NiAlFe-layered triple hydroxides (LTHs) having a strong sorption affinity towards both anionic and cationic dyes. Using the urea hydrolysis hydrothermal method LTHs were fabricated and by altering the ratio of participant metal cations the adsorbent was optimized. BET analysis revealed that the optimized LTHs possess an elevated surface area (160.04 m²/g) while TEM and FESEM analysis portrayed the stacked sheets-like 2D morphology. LTHs were employed for the amputation of anionic congo red (CR) and cationic brilliant green (BG) dye. The adsorption study showed that within 20 and 60 min, respectively, maximum adsorption capacities were achieved at 57.47 mg/g and 192.30 mg/g for CR and BG dye. Adsorption isotherm, kinetics, and thermodynamics study revealed that both chemisorptions with physisorptions were the assertive factor for the dye encapsulation. This enhanced adsorption performance of the optimized LTH for the anionic dye is attributed to its inherent anions exchange properties and new bond formation with the adsorbent skeleton. Whereas for the cationic dye, it was because of the formation of strong hydrogen bonds, and electrostatic interaction. Morphological manipulation of LTHs, formulates the optimized adsorbent LTH111, provokes the adsorbent for this elevated adsorption performance. Overall, this study revealed that LTHs have a high potential for the effectual remediation of dyes from wastewater as a sole adsorbent at a low cost.

Bismuth-Rich Co/Ni Bimetallic Metal-Organic Frameworks as Photocatalysts toward Efficient Removal of Organic Contaminants under Environmental Conditions

Active photocatalysts with an efficiency of 99% were prepared for the degradation of the industrial dye, methylene blue (MB), under visible light irradiation. These photocatalysts comprised Co/Ni-metal-organic frameworks (MOFs), to which bismuth oxyiodide (BiOI) was added as a filler to prepare Co/Ni-MOF@BiOI composites. The composites exhibited remarkable photocatalytic degradation of MB in aqueous solutions. The effects of various parameters, including the pH, reaction time, catalyst dose, and MB concentration, on the photocatalytic activity of the prepared catalysts were also evaluated. We believe that these composites are promising photocatalysts for the removal of MB from aqueous solutions under visible light.

Selective adsorption of anionic and cationic dyes on mesoporous UiO-66 synthesized using a template-free sonochemistry method: kinetic, isotherm and thermodynamic studies

In this study, template-free mesoporous UiO-66(U) has been successfully synthesized in shortened time by sonochemical methods and provided energy savings. The synthesized mesoporous UiO-66(U) demonstrated irregular morphology particle around 43.5 nm according to the SEM image. The N2 adsorption-desorption isotherm indicated an irregular, 8.88 nm pore width mesoporous structure. Ultrasonic irradiation waves greatly altered mesoporous materials. A mechanism for mesoporous UiO-66(U) formation has been proposed based on the present findings. Sonochemical-solvent heat saves 97% more energy than solvothermal. Mesoporous UiO-66(U) outperformed solvothermal-synthesized UiO-66(S) in adsorption. These studies exhibited that mesopores in UiO-66 promote dye molecule mass transfer (MO, CR, and MB). According to kinetics and adsorption isotherms, the pseudo-second-order kinetic and Langmuir isotherm models matched experimental results. Thermodynamic studies demonstrated that dye adsorption is spontaneous and exothermically governed by entropy, not enthalpy. Mesoporous UiO-66(U) also showed good anionic dye selectivity in mixed dye adsorption. Mesoporous UiO-66(U) may be regenerated four times while maintaining strong adsorption capability.

Synthesis and characterization of PCN-222 metal organic framework and its application for removing perfluorooctane sulfonate from water

Poly- and perfluoro alkyl substances (PFAS) are a group of man-made, notoriously persistent, and highly toxic contaminants in the environment reported worldwide. Many adsorbents including granular activated carbon, graphene, biochar, zeolites, and clay minerals have been tested for PFAS removal from water, but most of these materials suffer from high cost and/or poor removal performance. Here, we synthesized, characterized, and examined the efficiency of PCN-222(Fe), a new porous metal organic framework (MOF) with high water stability, for adsorptive removal of a frequently occurring PFAS, perfluorooctane sulfonate (PFOS), from water. The adsorption isotherm and kinetic studies revealed high PFOS adsorption capacity of PCN-222 (2257 mg/g), with rapid PFOS removal rate (within 30 min). The structure of PCN-222 was unaffected in water in the pH range of 2-10 but disintegrated and lost its PFOS removal ability at pH > 10. The PFOS adsorption on PCN-222 was an endothermic reaction. Electrostatic attraction was a dominant mechanism for PFOS adsorption at < 1694 mg/g PFOS concentration, while hydrophobic interaction accompanied with hydrogen-bonding was responsible at ≥ 1694 mg/g PFOS concentration. The interlayer morphology of PCN-222 did not change due to increasing PFOS loading. The findings of this study demonstrated superior features of PCN-222 over other conventional adsorbents for its potential application in removing PFOS from contaminated water to reduce PFOS transfer from water to living organisms.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Comparative study of ZIF-8-materials for removal of hazardous compounds using physio-chemical remediation techniques

The inherent toxicity, mutagenicity and carcinogenicity of dyes that are discharged into aquatic ecosystems, harming the health of humans and animals. ZIF-8 based composites are regarded as good adsorbents for the breakdown of dyes in order to remove or degrade them. In the course of this research, metal-organic framework materials known as ZIF-8 and its two stable composites, ZIF-8/BiCoO₃ (MZBC) and ZIF-8/BiYO₃ (MZBY), were produced via a hydrothermal process and solvothermal process, respectively, for the dangerous Congo red (CR) dye removal from the solution in water using adsorption method. According to the findings, the most significant amount of CR dye that could be adsorbed is onto MZBC, followed by MZBY and ZIF-8. The pseudo-second-order kinetic model was used effectively to match the data for adsorption behavior and was confirmed using the Langmuir isotherm equation. There is a possibility that the pH and amount of adsorbent might influence the adsorption behavior of the adsorbents. According to the experiment results, the technique featured an endothermic adsorption reaction that spontaneously occurred. The higher adsorption capability of MZBC is because of the large surface area. This results in strong interactions between the functional groups on the surface of MZBC and CR dye molecules. In addition to the electrostatic connection between functional group Zn-O-H on the surface of ZIF-8 in MZBC and the -NH₂ or SO₃ functional group areas in CR molecules, it also includes the strong π-π interaction of biphenyl rings.

Paddle-Wheel-Shaped Porous Cu(II)-Organic Framework with Two Different Channels as an Absorbent for Methylene Blue

The destruction of the ecological environment caused by human activity and modern industrial development is so severe that the water environment has become seriously polluted. Therefore, the exploration of high-efficiency absorbents has become one of the hot topics to solve this issue. Herein, a porous metal-organic framework [Cu(L)]·2.5H₂O·0.5DMF (1, DMF = N,N-dimethylformamide) was successfully constructed using a rigid N-heterocyclic 5-(4-(1H,3,4-triazol-1-yl)phenyl)isophthalic acid (H₂L) ligand. In particular, its structure includes the classical paddle-wheel-shaped secondary building units and two 1D channels with diameters of 7.2 and 3.2 Å, respectively. Complex 1 shows great sorption performance for methylene blue (MB) with a maximum capacity of 589 mg·g^-1. The various influence factors, including the time, dye concentration, adsorbent dosage, and the pH of the solution, are investigated respectively. Also, the adsorption process is more in line with the first-order kinetics and the Langmuir isothermal adsorption model. The strong electrostatic force and intermolecular forces are primarily responsible for the remarkable adsorption ability of MB.

Triangular Heteroporous Covalent Organic Framework via a K-Shaped "Two-in-One" Monomer: Targeted Synthesis and Selective Removal of Organic Pollutants

Covalent organic frameworks (COFs) have attracted increasing research interest due to their intriguing topological structures and fascinating properties. Diverse COFs with different shapes and sizes are developed by the design of appropriate building blocks. However, the heteroporous COFs to date are still in their infancy due to the relatively limited configuration of precursors. Herein, it is ingeniously designed and synthesized a new K-shaped "two-in-one" building unit (3',6'-bis(4-(5,5-dimethyl-1,3-dixoan-2-yl)phenyl)-[1,1':2',1"-terphenyl]-4,4"-diamine, BPTD), thus realizing the construction of triangular dual microporous COF (BPTD-COF) via self-polycondensation of the K-shaped monomer. The super micropore (0.76 nm) of BPTD-COF endows the higher density of amine activity sites, while the other aperture size (1.35 nm) meets the need for accommodating cationic dyes (rhodamine B, methylene blue), thus BPTD-COF displays a distinctive selective adsorption for cationic dyes with good reusability.

Effect of sulfur doping of zinc-imidazole coordination polymer (ZnIm CP) as a novel photocatalyst for degradation of ionic dyes

Zinc-Imidazole coordination polymer (ZnImCP) was simply synthesized hydrothermally at relatively low temperature (70 °C) from zinc acetate and imidazole. ZnImCP was treated by sulfide solution to produce sulfur-doped samples (S-ZnImCPs). Structures of the synthesized ZnImCP and S-ZnImCPs were characterized through FTIR, PXRD, and, Raman, SEM/EDX, N2-BET, UV–VIS DRS, and pHpzc analyses. The photocatalytic performances of pristine CP and sulfur modified CPs under visible and ultra-violet irradiations for degrading the cationic methylene blue (MB) and the anionic methyl orange (MO) were investigated considering different initial pH values 4, 7 and 10. Under visible light, the results indicate that these CPs display considerable photocatalytic degradation towards the cationic MB for the initial pH 4 and 7 where degradation increases with sulfur content. While under ultra-violet, results indicate considerable photocatalytic degradation towards both dyes for the initial pH 7 and 10 where degradation increases with sulfur content which indicates the gainful of non-metal dopping. The buffering nature of CPs and the type of radiation considering determined band-gap values effectively influence the degradation mechanisms.

Synthesis of stable flowerlike MgAl-LDH@MIL-88A and its adsorption performance for fluoride

MgAl-LDH@MIL-88A as an effective adsorbent was successfully prepared by a simple stirring method in water bath through loading MIL-88A onto the surface of flowerlike MgAl-LDH, which was synthesized via solvothermal method. Interestingly, the results of characterizations showed that the MIL-88A could still grow, but extrude the brucite-like layers of MgAl-LDH. The influences of initial solution pH, contact time, temperature, and co-existing ions on the adsorption performance of MgAl-LDH@MIL-88A were studied systematically by batch static adsorption experiments. It was found that MgAl-LDH@MIL-88A represented the highest adsorption loading of fluoride (14.00 mg g−1) at initial pH 7.0 in 420 min. The uptake process was described appropriately by the pseudo-second-order, the Temkin and the Freundlich isotherm models. The thermodynamic parameters confirmed the endothermic and spontaneous nature of adsorption. MgAl-LDH@MIL-88A was the green adsorbent as the residual mental contents ([Mg2+] = 1.095 mg L−1, [Fe3+] = 0.007 mg L−1, [Al3+] = 0.076 mg L−1) after adsorption met the Chinese sanitary standard for drinking water (GB 5749-2006). The mechanism of fluoride removal by MgAl-LDH@MIL-88A involved the electrostatic interactions between Fe3+ of MIL-88A and fluoride, and ligand exchange among hydroxyl groups of MgAl-LDH, carboxylate groups of the C4H4O4 and fluoride.

Sunlit photocatalytic degradation of organic pollutant by NiCr2O4/Bi2S3/Cr2S3 tracheid skeleton nanocomposite: Mechanism, pathway, reactive sites, genotoxicity and byproduct toxicity evaluation

In this study, 3D C₂S₃ (CS) and 2D Bi₂S₃ (BS) modified NiCr₂O₄ nanocomposite (NCO-BS-CS NCs) was prepared by sonochemical assisted co-precipitation method for the enhanced photocatalytic activity. Here, NCO-BS-CS NCs showed band gap energy of 2.23 eV and the PL intensity of NCO-BS-CS NCs was lower than NCO, BS, and CS NPs. Thus, the results indicate the fabricated NCO-BS-CS NCs enhance the charge segregation and lower in recombination rate. NCO-BS-CS NCs showed enhanced photodegradation of methyl orange (MO) (95%) and congo red (CR) (99.7%) respectively. The total organic compound (TOC) analysis shows the complete mineralization of about 91 and 98% for MO and CR respectively. Furthermore, the Fukui function was used for the prediction of reactive sites in the photodegradation pathway of MO and CR by NCs. ECOSAR program was done to determine the toxicity of the intermediate and the results conclude that the degraded product shows nontoxic to the environmental organism (fish, daphnia, and algae). Thus, the fabricated NCO-BS-CS NCs can be used for the remediation of toxic organic pollutants from the waste water by photocatalytic degradation.

Dynamics and thermodynamics for competitive adsorptive removal of methylene blue and rhodamine B from binary aqueous solution onto durian rind

Concurrent adsorptive removal of methylene blue (MB) and rhodamine B (RhB) onto durian rind (DR) agricultural waste, from an aqueous binary solution as a model of wastewater containing multiple synthetic dyes, was investigated. The concurrent adsorption of the dyes followed pseudo-second-order kinetics. The adsorption isotherm was well simulated by the Langmuir model, implying a monolayer adsorption to the surface with a homogeneous binding energy. The adsorption process was governed by external mass transfer through two-step intraparticle diffusion of the dyes onto the adsorbent surface. The adsorption efficiency of MB (96.4%) is much higher than that of RhB (56.3%). This is attributed to the higher rate constant for the adsorption of MB (0.348 g mg^-1 min^-1) as compared to that of RhB (0.151 g mg^-1 min^-1). The adsorption behavior suggested that the two cationic dyes in the binary solution diffused and adsorbed independently and randomly onto the DR surface. The adsorption capacity of MB and RhB in the binary solution (47.4 mg g^-1 and 32.9 mg g^-1, respectively) is lower than those of their single solute solutions (93.3 mg g^-1 and 62.8 mg g^-1, respectively), suggesting a competitive effect in their concurrent adsorption. This was confirmed based on the adsorption characteristics of the binary solution with different molar ratios. The competitive effect was attributed to either non-interactive or repulsive electrostatic interactions between the positively charged dyes in the binary system. The domination of MB is attributed to its smaller molecular size, higher planarity, and faster adsorption kinetics compared with RhB.

Surface Modification of Biochar for Dye Removal from Wastewater

Nowadays, biochar is being studied to a great degree because of its potential for carbon sequestration, soil improvement, climate change mitigation, catalysis, wastewater treatment, energy storage, and waste management. The present review emphasizes on the utilization of biochar and biochar-based nanocomposites to play a key role in decontaminating dyes from wastewater. Numerous trials are underway to synthesize functionalized, surface engineered biochar-based nanocomposites that can sufficiently remove dye-contaminated wastewater. The removal of dyes from wastewater via natural and modified biochar follows numerous mechanisms such as precipitation, surface complexation, ion exchange, cation–π interactions, and electrostatic attraction. Further, biochar production and modification promote good adsorption capacity for dye removal owing to the properties tailored from the production stage and linked with specific adsorption mechanisms such as hydrophobic and electrostatic interactions. Meanwhile, a framework for artificial neural networking and machine learning to model the dye removal efficiency of biochar from wastewater is proposed even though such studies are still in their infancy stage. The present review article recommends that smart technologies for modelling and forecasting the potential of such modification of biochar should be included for their proper applications.

Synergetic removal of oppositely charged dyes by co-precipitation and amphoteric self-floating capturer: Mechanism investigation by molecular simulation

The adsorption performances of adsorbents to dyes are hard to maintain in a wide pH range because most of the reactions are pH-dependent, developing a cost-effective strategy to break the pH-limitation is significant. In this study, an amphoteric self-floating adsorbent (Am-SA) was synthesized by hollow silica microsphere surface modification, which was useful to capture anionic acid orange 7 (AO7) and cationic crystal violet (CV) dyes, but the adsorption performances were also greatly affected by pH. Fortunately, a co-precipitation phenomenon was noticed when the AO7 and CV solutions were mixed with a 1:1 molecule ratio. The precise structures of AO7 and CV molecules were constructed and the AO7-CV-H₂O mixed system was structured by Materials Studio. Besides, this system was involved in a dynamic simulation to reveal the mechanism of the co-precipitation phenomenon. The simulation results showed H₂O molecules dispersed out of the system via thermal motions within 30 ps, but the AO7 and CV molecules aggregated to each other via electrostatic attractions. The energy calculations also demonstrated the electrostatic attraction between AO7 and CV is the dominant factor that induced the aggregation. The aggregation phenomena were also observed in various mixed cationic-anionic dyes systems. The removals of dyes significantly improved in a wide pH range in the mixed systems as the captures of the aggregated dye clusters were much easier than that of independent dye molecules, and both co-precipitation and adsorption contributed to it. Proper utilization of the aggregation behaviors between dyes can be regarded as a prospective strategy in cost-effective treatments.

Mechanisms of Selected Anionic Dye Removal by Clinoptilolite

The extensive use of color dyes in modern society has resulted in serious concerns of water contamination. Many organic dyes bear charges; thus, materials of opposite charges have been tested for sorptive removal. However, the results from several studies also showed that anionic dyes methyl orange (MO) and alizarin red S (ARS) could be removed from water using minerals of negative charges, but the mechanisms were not addressed. In this study, negatively charged clinoptilolite was tested for its removal of anionic dyes MO and ARS from water under different physico-chemical conditions and to investigate the mechanism of Mo and ARS removal. The sorption capacities were 166 and 92 mmol/kg for MO and ARS, respectively, confirming the uptake of anionic dyes on negatively charged framework silicates. The influence of solution pH and ionic strength on MO removal was minimal, indicating the strong affinity of anionic dyes for clinoptilolite in comparison to other inorganic species. It was speculated that the N in the dimethyl group may bear a partial positive charge, which may have a net electrostatic attraction to the negatively charged mineral surfaces for MO sorption. For ARS, sorption may involve hydrogen bonding formation between the dye and the clinoptilolite. Moreover, under the experimental conditions, the MO molecules form dimers in solution via dimeric π-π interactions. Thus, the sorption of the dimers or aggregation of the MO monomers and dimers on clinoptilolite surface was attributed to additional MO removal, as suggested by molecular dynamic simulations. The speculation was supported by FTIR analyses and molecular dynamic simulations. As such, negatively charged Earth materials may be used as sorbents for the removal of certain anionic dyes via sorption, a new perspective for the innovative use of Earth materials.

Biochar microtube interconnected hydrotalcite nanosheets for the adsorption of aqueous Sb(III)

Actuated by the non-ionic heavy metal of antimony (Sb) contaminants with undesired toxicity to the environment and human health, capturing Sb is urgent to remedy contaminated water. Herein, the lamellar MnCo hydrotalcite was grown on catkin-derived biochar through the in situ etching of ZIF-L to construct a hierarchical microtube@nanosheet hybrid (CLMH) for Sb immobilization. The adsorption behaviour and mechanism of trivalent antimony (Sb (III)) on the CLMH were investigated. The CLMH shows good pH applicability for capturing Sb(III) at pH from 2 to 9. The excellent adsorption capacity of CLMH for Sb(III) is 247.62 mg g^-1at 303 K, and the endothermic process is proved by the positive value of ΔH0(10.54 kJ mol^-1). The adsorption process is fitted with the intra-particle diffusion model, which can be described with external mass transfer, intraparticle diffusion in pores, and equilibrium stage. The adsorption mechanism is proved, which includes the bind of Metal-O-Sb bonds by inner-sphere complex, the embedding of Sb in the intercalation of hydrotalcite, redox between Mn and Sb, and functional groups dependent anchoring effect. The work benefits the understanding of the antimony removal behaviour over the hierarchical microtube@nanosheet hybrids.

Self-assembling of 3D layered flower architecture of BiOI modified MgCr2O4 nanosphere for wider spectrum visible-light photocatalytic degradation of rhodamine B and malachite green: Mechanism, pathway, reactive sites and toxicity prediction

In this study, 3D BiOI nanoparticle (BOI NPs) modified MgCr₂O₄ nanoparticle (MCO NPs) was fabricated by simple sonochemical and coprecipitation method for the enhanced photocatalytic activity. The morphological structure of the MgCr₂O₄-BiOI nanocomposite (MCO-BOI NCs) was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-visible diffuse reflectance spectroscopy (DRS), electron impedance spectroscopy (EIS) and photo luminescence (PL). The lower in the PL intensity and small arc in EIS for NCs shows the effective charge separation and lower in rate of recombination of charge carriers in NCs than the pure MCO and BOI NPs. The degradation efficiency of Rhodamine B (RhB) and malachite green (MG) by MCO-BOI NCs was found to be 99.5% and 98.2% receptivity. In addition, the photocatalytic degradation of RhB and MG was studied under various environmental parameters (different pH, varying the concentration of NCs and dyes) and response surface (RSM) plot was performed. The complete mineralization of RhB and MG by MCO-BOI NCs was determined by TOC. In addition, the photocatalytic degradation pathway was elucidated based on GC-MS results and Fukui function. In addition, the toxicity of intermediate formed during the degradation of RhB and MG was predicted by ECOSAR. The present work highlights the application of MCO-BOI NCs in environmental remediation for toxic pollutant removal.

Magnetic UiO-66 functionalized with 4,4'-diamino-2,2'-stilbenedisulfonic as a highly recoverable acid catalyst for the synthesis of 4H-chromenes in green solvent

According to 4H-chromenes importance, we synthesized a novel magnetic UiO-66 functionalized with 4,4′-diamino-2,2′-stilbenedisulfonic as an efficient and reusable solid acid catalyst for synthesizing 4H-chromene skeletons via a one-pot three components reaction in a green solvent. The structure of the synthesized catalyst was confirmed by various techniques including FT-IR, XRD, BET, TGA, TEM, EDX, and SEM, and also the product yields were obtained in 83–96% of yields for all the reactions and under mild conditions. The reported procedure presents an environmentally friendly approach for synthesizing a significant number of 4H-chromene derivatives. Correspondingly, MOF-based catalyst makes it easy to separate from reaction media and reuse in the next runs.

Recent Advances in MOF-Based Adsorbents for Dye Removal from the Aquatic Environment

The adsorptive removal of dyes from industrial wastewater using commercially available adsorbents is not significantly efficient. Metal–organic frameworks (MOFs) offer outstanding properties which can boost the separation performance over current commercial adsorbents and hence, these materials represent a milestone in improving treatment methods for dye removal from water. Accordingly, in this paper, the recent studies in the modification of MOF structures in dye removal from the aquatic environment have been discussed. This study aims to elaborate on the synthetic strategies applied to improve the adsorption efficiency and to discuss the major adsorption mechanisms as well as the most influential parameters in the adsorptive removal of dyes using MOFs. More particularly, the advanced separation performance of MOF-based adsorbents will be comprehensively explained. The introduction of various functional groups and nanomaterials, such as amine functional groups, magnetic nanoparticles, and carbon-based materials such as graphene oxide and CNT, onto the MOFs can alter the removal efficiency of MOF-based adsorbents through enhancing the water stability, dispersion in water, interactions between the MOF structure and the contaminant, and the adsorption capacity. Finally, we summarize the challenges experienced by MOF-based materials for dye removal from water and propose future research outlooks to be considered.

Hybrid metal organic frameworks as an Exotic material for the photocatalytic degradation of pollutants present in wastewater: A review

In this world, water is considered as the Elixir for all living creatures. Human life rolls with water, and every activity depends upon water. Worldwide water resources are being contaminated due to the elevation in the population count, industrialization and urbanization. Ejection of chemicals by industries and domestic sewages remains the major reason in the destruction of natural water resources. Contaminated water with harmful microbes, chemical dyes, pesticides, and carcinogens are the root cause of many diseases and deaths of living species. In this scenario, researchers engaged in producing ultra components to remove the contaminants. Metal organic frameworks (MOF) are the desired combination of organic and inorganic materials to achieve the required target. MOFs possess unique characteristics like tunable internal structure, porosity, crystallinity and high surface area which enable them for energy and environmental application. For the past years, MOFs are concentrated more as a photocatalyst in the treatment of polluted water. These research studies discuss the improvement of photocatalytic performance of MOF by the incorporation of metals, metal coupled with nanoparticles like polymers, graphene, etc., into it to achieve the enhanced photocatalytic activity by scavenging entire chemicals and harmful microbes to retain the quality of water. The target of this review article is to focus on the state of the art research work on MOFs in photocatalytic water treatment technique.

Direct Z-scheme of n-type CuS/p-type ZnS@electrospun PVP nanofiber for the highly efficient catalytic reduction of 4-nitrophenol and mixed dyes

Environmental pollution has been the most critical issue on earth due to many factors, particularly the industrial chemical waste, which can be detoxified by photocatalytic methods. In this study, we demonstrate the fabrication of an electrospun composite nanofiber embedded with n-type CuS and p-type ZnS in partially carbonized-PVP nanofibers, so-called Z-type-CuS/ZnS@PVP nanofibers, to reduce 4-nitrophenol to 4-aminophenol and degrade the mixed dyes of methylene blue, rhodamine B, and methyl orange. The Z-type-CuS/ZnS@PVP nanofibers were prepared by an electrospinning method, followed by annealing at 180 °C and 400 °C under N₂ atmosphere. As-prepared CuS/ZnS@PVP nanofibrous mats were characterized by SEM, XRD, PL, DRS, TPC, and EIS analyses. The results revealed that Z-type CuS/ZnS@PVP nanofibers have enhanced optical and electrochemical properties as compared with the CuS@PVP and ZnS@PVP nanofibers. Likewise, the Z-scheme was more beneficial for promoting the electron transfer as well as for delaying the photocarrier recombination. For the applications of CuS/ZnS@PVP nanofibers, the reduction of 4-nitrophenol to 4-aminophenol occurred within 2 h and the mixed-dye degradation occurred in 90 min in 5% MeOH aqueous solution under solar light irradiation. The CuS/ZnS@PVP nanofibers also possessed excellent stability, with more than 95% remaining after five recycle runs. The photocatalytic mechanism reaction is proposed, in which the mechanism was initiated by the adsorption of organic pollutants on the nanofiber matrix, followed by the photoreaction due to e⁻ and h⁺ in CuS/ZnS after light irradiation as well as from the generated radical species. Lastly, the inorganic photocatalyst embedded in the nanofiber matrix offered an easy recovery process with excellent degradation performance as well.

Z-type CuS/ZnS@PVP nanofibers are synthesized for the photocatalytic reduction of 4-nitrophenol and for mixed-dyes degradation under mild conditions.

Recent advances on bimetallic metal-organic frameworks (BMOFs): Syntheses, applications and challenges

Bimetallic metal-organic frameworks (MOFs) possess two different metal ions as nodes in their molecular frameworks. They are prepared by either using one-pot syntheses wherein different metals are mixed with suitable...

Synthesis of a 2D copper(II)-carboxylate framework having ultrafast adsorption of organic dyes

Two-dimensional (2D) coordination polymers are very interesting materials for their attractive applications. A novel 2D metal-organic framework (MOF) was derived from copper(II) and amino benzoic acid under both room temperature and solvothermal reaction conditions using different solvents. From both of the synthesis methods, an identical MOF was crystalized with monoclinic crystal system having P2₁/c space group. Hirshfeld surface analysis is carried out to explore the non-covalent interactions obtained from single crystal XRD investigation in terms of percentage contribution of each interatomic contact involved in packing of molecules into MOF structure. The microstructure analysis and surface morphology studies revealed the 2D layered regular pattern of rhombus disks of ~5 μm thickness throng together via clustering of these rhombic shaped flakes as flowers (ranging 50-100 μm in size) having uniform elemental composition. This 2D MOF efficiently adsorbed organic dyes (methylene blue, methyl orange, and methyl red) from their aqueous solutions. The 2D copper-carboxylate framework (1.2 g/L) exhibited high adsorption rates for organic dyes (0.15-0.19 mM), and >90% of these dyes could be captured as soon as they are exposed to MOF suspension (1 min) in each case. The dye removal efficiency is credited to synergy among structure, ionic strength, shapes and dimensions of dyes with respect to MOF structure. The microstructure of MOF along with electronic interactions like electrostatic, hydrogen bonding, π-π interactions and coordination to open metal sites, might contribute to the ultrafast dye adsorption process by MOF. The adsorption phenomenon is spontaneous and followed the pseudo-second order kinetic mechanism. DFT calculations revealed important electronic parameters of the dyes and model MOF systems, and novel insights with respect to possible dye-MOF interactions. The MOF remained quite stable during the dye adsorption and was regenerated easily for the successful subsequent use.

A new approach for ultra-high adsorption of cationic methylene blue in a Zr-sulfonic-based metal-organic framework

A series of Zr-sulfonic-based metal–organic frameworks have been synthesized by the solvothermal method, namely VNU-17 and VNU-23. Particularly, VNU-17 and VNU-23 adopt the sulfonate group (SO₃⁻) moieties densely packed within their structure, which can efficiently uptake MB⁺ from wastewater. The maximum adsorption capacity for MB⁺ onto VNU-23 is up to 1992 mg g⁻¹ at pH = 7, which is more than five times that of activated carbon and possesses the highest value among all the reported MOF materials. In addition, VNU-23 retains the adsorption uptake of MB for at least five cycles. The adsorption isotherms and kinetic studies reveal that MB⁺ dye adsorption onto VNU-23 fits a Langmuir isotherm and the pseudo second order kinetic model. Furthermore, the ultra-high adsorption capacity of VNU-23 for MB dye can be accounted for by the suitable pore/channel size together with electrostatic attraction and π–π interactions. These results indicate that VNU-23 can be utilized as a promising candidate for removing MB⁺ from an aqueous medium.

A series of Zr-sulfonic-based metal–organic frameworks have been synthesized by the solvothermal method, namely VNU-17 and VNU-23.

Selective capture of toxic anionic dyes of a novel prepared DMDAAC-grafted chitosan/genipin/cellulose hydrogel beads with antibacterial activity

Novel eco-friendly and green dimethyldiallylammonium chloride (DMDAAC) grafted chitosan/genipin/cellulose hydrogel beads (CCBG-g-PDMDAAC), were fabricated as selective adsorbents for anionic dyes. The physical and chemical structural changes of the prepared hydrogels were evaluated by FTIR, XRD, SEM and TG-DSC analysis. Results showed CCBG-g-PDMDAAC efficiently and selectively adsorb anionic dyes (Reactive Red 195-RR195 and Methyl orange-MO) from mixture of dye solutions. Endowed chitosan-based hydrogels the advantage of acid insolubility and good adsorption. RR195 and MO adsorption process were described better with pseudo-second-order kinetic model and Langmuir isotherm model with a maximum adsorption capacity of 1333.52 and 190.48 mg/g, respectively, indicating that monolayer chemisorption controlled the sorption process. Moreover, the hydrogels exhibited nice reusability and against S. aureus and E. coli. The hydrogels are promising for the potential application in wastewater treatment and antibacterial simultaneously.