Evaluating the simultaneous electrochemical determination of antineoplastic drugs using LaNiO3/g-C3N4@RGH nanocomposite material

A novel electrochemical sensor based on LaNiO3/g-C3N4@RGH nanocomposite material was developed to simultaneously determine Ribociclib (RIBO) and Alpelisib (ALPE). Ribociclib and Alpelisib are vital anticancer medications used in the treatment of advanced breast cancer. The sensor exhibited excellent electrocatalytic activity towards the oxidation of RIBO and ALPE, enabling their simultaneous detection. The fabricated sensor was characterized using various techniques, including energy dispersive X-ray (EDX), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS), which confirmed the successful synthesis of the LaNiO3/g-C3N4@RGH composite material. Electrochemical characterization revealed enhanced conductivity and lower resistance of the modified electrode compared to the bare electrode. The developed sensor exhibited high repeatability, reproducibility, stability, and selectivity toward RIBO detection. Furthermore, the sensor displayed high sensitivity with low detection limits of 0.88 nM for RIBO and 6.1 nM for ALPE, and linear ranges of 0.05-6.2 μM and 0.5-6.5 μM, respectively. The proposed electrochemical sensor offers a promising approach for simultaneously determining RIBO and ALPE in pharmaceutical formulations and biological samples with recovery data of 98.7-102.0 %, providing a valuable tool for anticancer drug analysis and clinical research.

Synthesis and performance evaluation of S-scheme heterostructured LaFeO3/TiO2 photocatalyst for the efficient degradation of thiamethoxam

The application of perovskite lanthanum ferrite (LaFeO3) as a photocatalyst has shown significant potential in the removal of persistent organic and inorganic contaminants. In the present research, LaFeO3 and various composites consisting of LaFeO3 and TiO2 were prepared. The photocatalytic efficiency of the produced catalysts was assessed by measuring their effectiveness in degrading thiamethoxam, a pesticide belonging to the second generation of neonicotinoids. Experimental investigations were carried out to examine the impact of various factors on the degradation process, including variables like concentration of thiamethoxam, catalyst amount, and pH level. The produced catalysts were characterized by various techniques, including field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). The highest degradation rates were observed when using the synthesized catalyst, 1% LaFeO3/TiO2 (LFTO1), under both UV-C and direct sunlight conditions. This performance outperformed TiO2 and bare LaFeO3. When exposed to ultraviolet (UV-C) radiation at an intensity of 15 W m-2 and under neutral pH conditions, LFTO1 achieved approximately 97% degradation, while under direct sunlight, the LFTO1 photocatalyst exhibited a degradation rate of 79% within a 120-min reaction period. The enhanced activity of LFTO1 could be attributed to its increased surface area, reduced bandgap, and lower electron-hole recombination. The investigation of reaction kinetics showed that the degradation of thiamethoxam followed a pseudo-first-order rate law. Furthermore, LFTO1 can be employed up to 5 times without experiencing any loss in its catalytic activity, thus confirming its long-term utility.

A Visible-Light-Enhanced Heterogeneous Photo Degradation of Tetracycline by a Nano-LaFeO3 Catalyst with the Assistance of Persulfate

Perovskites with nano-flexible texture structures and excellent catalytic properties have attracted considerable attention for persulfate activation in addressing the organic pollutants in water. In this study, highly crystalline nano-sized LaFeO₃ was synthesized by a non-aqueous benzyl alcohol (BA) route. Under optimal conditions, an 83.9% tetracycline (TC) degradation and 54.3% mineralization were achieved at 120 min by using a coupled persulfate/photocatalytic process. Especially compared to LaFeO₃-CA (synthesized by a citric acid complexation route), the pseudo-first-order reaction rate constant increased by 1.8 times. We attribute this good degradation performance to the highly specific surface area and small crystallite size of the obtained materials. In this study, we also investigated the effects of some key reaction parameters. Then, the catalyst stability and toxicity tests were also discussed. The surface sulfate radicals were identified as the major reactive species during the oxidation process. This study provided a new insight into nano-constructing a novel perovskite catalyst for the removal of tetracycline in water.

Effective Removal of Methylene Blue on EuVO4/g-C3N4 Mesoporous Nanosheets via Coupling Adsorption and Photocatalysis

In this study, we first manufactured ultrathin g-C₃N₄ (CN) nanosheets by thermal etching and ultrasonic techniques. Then, EuVO₄ (EV) nanoparticles were loaded onto CN nanosheets to form EuVO₄/g-C₃N₄ heterojunctions (EVCs). The ultrathin and porous structure of the EVCs increased the specific surface area and reaction active sites. The formation of the heterostructure extended visible light absorption and accelerated the separation of charge carriers. These two factors were advantageous to promote the synergistic effect of adsorption and photocatalysis, and ultimately enhanced the adsorption capability and photocatalytic removal efficiency of methylene blue (MB). EVC-2 (2 wt% of EV) exhibited the highest adsorption and photocatalytic performance. Almost 100% of MB was eliminated via the adsorption–photocatalysis synergistic process over EVC-2. The MB adsorption capability of EVC-2 was 6.2 times that of CN, and the zero-orderreaction rate constant was 5 times that of CN. The MB adsorption on EVC-2 followed the pseudo second-order kinetics model and the adsorption isotherm data complied with the Langmuir isotherm model. The photocatalytic degradation data of MB on EVC-2 obeyed the zero-order kinetics equation in 0–10 min and abided by the first-order kinetics equation for10–30 min. This study provided a promising EVC heterojunctions with superior synergetic effect of adsorption and photocatalysis for the potential application in wastewater treatment.

Application of perovskite oxides and their composites for degrading organic pollutants from wastewater using advanced oxidation processes: Review of the recent progress

In the recent years, perovskite oxides are gaining an increasing amount of attention owing to their unique traits such as tunable electronic structures, flexible composition, and eco-friendly properties. In contrast, their catalytic performance is not satisfactory, which hinders real wastewater remediation. To overcome this shortcoming, various strategies are developed to design new perovskite oxide-based materials to enhance their catalytic activities in advanced oxidation process (AOPs). This review article is to provide overview of basic principle and different methods of AOPs, while the strategies to design novel perovskite oxide-based composites for enhancing the catalytic activities in AOPs have been highlighted. Moreover, the recent progress of their synthesis and applications in wastewater remediation (pertaining to the period 2016-2022) was described, and the related mechanisms were thoroughly discussed. This review article helps scientists to have a clear outlook on the selection and design of new effective perovskite oxide-based materials for the application of AOPs. At the end of the review, perspective on the challenges and future research directions are discussed.

A versatile optofluidic microreactor for artificial photosynthesis induced coenzyme regeneration and L-glutamate synthesis

With the rapid development of modern society, the energy crisis has become a global concern. Solar energy is a good replacement because it is green, unlimited and environment-friendly. Inspired by natural photosynthesis, artificial photosynthesis was developed to convert solar energy to chemical energy by a photocatalyst system. For better utilizing solar energy and improving the conversion efficiency, the design of photoreactors is crucial for the improvement of photocatalysis efficiency. However, most of the reported microreactors hardly satisfy the demands for low cost, easy fabrication, high transparency, being evaporation-proof, ease of scaling up, high surface-to-volume ratio, and photocatalyst immobilization. In this paper, we developed a facile method to build a fully immobilized microreactor (FIM) and a controllable partially immobilized microreactor (PIM), both of which satisfy all the demands mentioned above. In the FIM, the regeneration rate of a coenzyme (nicotinamide adenine dinucleotide, NADH) reached 82.20% in 40 min. Considering the NADH regeneration rate per unit/coating angle of photocatalysts in circular microreactors, the PIM performed much better than the FIM, proving that our partial coating method is a significant and useful improvement. Also, the bioactivity of NADH toward enzyme catalysis was demonstrated by glutamate dehydrogenase-catalyzed synthesis of L-glutamate, and the conversion of α-ketoglutarate reached 99.92%. To test the practicality of the microreactor in a real environment, we performed a test under solar light, achieving a good result of 74.92% in 60 min. Thus, this efficient and versatile microfluidic platform may have good potential for photocatalytic synthesis of versatile valuable products in the future.

An emerging photocatalyst for wastewater remediation: a mini-review on CaCu3Ti4O12 photocatalysis

Ceramics-based filter for water treatment is an ancient technology to procure potable water at the household level. The traditional clay pots (vessels or hollow cylindrical container) have been used since long in the developing countries. The ceramic material (CaCu₃Ti₄O₁₂ or CCTO) is a hetero-junction of titanium oxide, a well-known UV-active photocatalyst, and visible light absorbing CuO materials. This hetero-junction is able to overcome the limitations such as high bandgap, poor stability, low efficiency, and high photo-generated charge (e^-/h⁺) recombination rate, associated with the other commonly used metal oxide semiconductor photocatalysts. Moreover, the low-cost, viable and facile synthesis routes for CCTO triggered its potential applications in photoelectrochemical and photocatalytic processes. This review will elaborate on the available literature demonstrating the visible light activity of CCTO photocatalysts in water treatment technologies. Furthermore, the mechanism of photocatalysis and synthesis routes are presented in this work for broader impact of the CCTO potential applications. The extended porous character and excellent surface texture have made the ceramic materials as an ideal choice to combat the bacteria, pathogens and turbidity in aqueous medium at household level. Specifically, the controlled size and shape make the CaCu₃Ti₄O₁₂ (CCTO) an excellent visible light-driven photocatalyst, involving highly reactive species such as ^•OH, ^•O₂^- anions, h⁺, and e^-, for the removal of organic and inorganic pollutants from water.

Developing sustainable, high-performance perovskites in photocatalysis: design strategies and applications

Solar energy is attractive because it is free, renewable, abundant and sustainable. Photocatalysis is one of the feasible routes to utilize solar energy for the degradation of pollutants and the production of fuel. Perovskites and their derivatives have received substantial attention in both photocatalytic wastewater treatment and energy production because of their highly tailorable structural and physicochemical properties. This review illustrates the basic principles of photocatalytic reactions and the application of these principles to the design of robust and sustainable perovskite photocatalysts. It details the structures of the perovskites and the physics and chemistry behind photocatalytic reactions and describes the advantages and limitations of popular strategies for the design of photoactive perovskites. This is followed by examples of how these strategies are applied to enhance the photocatalytic efficiency of oxide, halide and oxyhalide perovskites, with a focus on materials with potential for practical application, that is, not containing scarce or toxic elements. It is expected that this overview of the development of photocatalysts and deeper understanding of photocatalytic principles will accelerate the exploitation of efficient perovskite photocatalysts and bring about effective solutions to the energy and environmental crisis.

LaCoxFe1-XO3 (0≤x≤1) spherical nanostructures prepared via ultrasonic approach as photocatalysts

To harvest the photon energy, a sequenceof perovskite-type oxides of LaCoxFe1-xO3 (0 ≤x≤1) nanostructures with distinct 'Cobalt' doping at the position of B-site are successfully prepared via a simple ultrasonic approach as photocatalyst. The crystallinity, phase identification, microstructure, and morphology of perovskite nanocomposites were analyzed to better understand their physicochemical properties. The catalytic efficiency was assessedusing Congo Red (CR) dye by visible light irradiation for 30 min. Applying terephthalic acid as a probe molecule, the formation of hydroxyl radicals during the processes was investigated. The photocatalytic efficacy was measured by varying different Co/Fe stoichiometric molar ratios and noticed the order of sequence is 0.2 > 0.6 > 0.4 > 0.8 > 0.5 > 0 > 1 after 30 min of reaction time. Finally using LaCo0.2Fe0.8O3 nanostructures, cycling studies (n = 3) were performed to determine its photostability and reusability. The photocatalytic methodology proposed in this study was discussed extensively.

An Overview of the Recent Progress in Polymeric Carbon Nitride Based Photocatalysis

Recently, polymeric carbon nitride (g-C₃ N₄ ) as a proficient photo-catalyst has been effectively employed in photocatalysis for energy conversion, storage, and pollutants degradation due to its low cost, robustness, and environmentally friendly nature. The critical review summarized the recent development, fundamentals, nanostructures design, advantages, and challenges of g-C₃ N₄ (CN), as potential future photoactive material. The review also discusses the latest information on the improvement of CN-based heterojunctions including Type-II, Z-scheme, metal/CN Schottky junctions, noble metal@CN, graphene@CN, carbon nanotubes (CNTs)@CN, metal-organic frameworks (MOFs)/CN, layered double hydroxides (LDH)/CN heterojunctions and CN-based heterostructures for H₂ production from H₂ O, CO₂ conversion and pollutants degradation in detail. The optical absorption, electronic behavior, charge separation and transfer, and bandgap alignment of CN-based heterojunctions are discussed elaborately. The correlations between CN-based heterostructures and photocatalytic activities are described excessively. Besides, the prospects of CN-based heterostructures for energy production, storage, and pollutants degradation are discussed.

Bandgap Engineering in a Staggered-Type Oxide Perovskite Heterojunction for Efficient Visible Light-Driven Photocatalytic Dye Degradation

Oxide perovskite materials with ABO₃ structure have been widely employed for photocatalytic applications. However, owing to the disadvantageous electron-hole recombination process and wide bandgap of some materials, the photocatalytic performance is seemingly restricted. Coupling two catalysts together through the formation of a heterojunction ensures effective charge carrier separation. The intimate interaction between the materials is propitiously useful for charge transfer, thereby increasing the efficacy. In this study, the photocatalytic activity of a K_xNa_(1-x)NbO₃-BaBiO₃ (KNN-BBO) heterojunction material for the degradation of Rhodamine 6G organic dye was investigated. The materials were extensively characterized by X-ray diffraction, UV-Vis diffused reflectance spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and N₂ adsorption isotherms. The degradation efficiency of the organic contaminant under 1 sun simulated sunlight is monitored by spectral analysis from UV-Vis absorption spectroscopy. The resistance to charge transfer was also observed by electrochemical impedance spectroscopy. The effect of the sintering temperature on the photoinduced degradation activity was also included in our study. An unsintered KNN-BBO (UKB) composite material is found to be the most efficient catalyst with 84% removal efficiency as compared to the sintered one (SKB). This is attributed to the reduced bandgap with staggered-type band alignment, increased surface area, and surface oxygen vacancy states. Together with the crucial findings of this work, a probable mechanism for enhanced photocatalytic activity has been proposed here.

Heterojunction of N/B/RGO and g-C3N4 anchored magnetic ZnFe2O4@ZnO for promoting UV/Vis-induced photo-catalysis and in vitro toxicity studies

To promote the low photocatalytic efficiency caused by the recombination of electron/hole pairs and widen the photo-response wavelength window, ZnFe₂O₄@ZnO-N/B/RGO and ZnFe₂O₄@ZnO-C₃N₄ ternary heterojunction nanophotocatalysts were designed and successfully prepared through a sol-gel technique. In comparison to bare ZnFe₂O₄ and ZnO, the ZnFe₂O₄-ZnO@N/B/RGO and ZnFe₂O₄@ZnO-C₃N₄ ternary products showed highly improved photocatalytic properties in the degradation of methyl orange (MO) under ultra-violet (UV) and visible light irradiation. Various physicochemical properties of the photocatalysts were evaluated through field emission scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX) analysis, X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FT-IR), and vibrating sample magnetometer (VSM) techniques. The observations indicated that the ternary heterojuncted ZnFe₂O₄@ZnO-N/B/RGO absorbs lower energy visible light wavelengths, which is an enhancement in the photocatalytic properties of ZnFe₂O₄@ZnO loaded on reduced graphene oxide (RGO) nanosheets and graphite-like carbon nitride (g-C₃N₄). This gives the catalyst photo-Fenton degradation properties.

Activity enhancement pathways in LaFeO3@TiO2 heterojunction photocatalysts for visible and solar light driven degradation of myclobutanil pesticide in water

LaFeO₃@TiO₂ heterojunction composites with a core-shell porous structure and LaFeO₃ contents in the 2.5-25 wt.% range have been synthesized via consecutive sol-gel syntheses and tested for the photocatalytic oxidation of the myclobutanil pesticide in water under solar light and pure visible light. Whatever the light spectrum, the kinetic rate constants for both myclobutanil degradation and TOC conversion exhibited a volcano-like profile with increasing the narrow band-gap (2.1 eV) LaFeO₃ content, the optimum composite strongly overperforming both single phases, with full myclobutanil mineralization achieved in 240 min in the best case. The light spectrum influenced the optimum LaFeO₃ content in the composite, being observed at 5 wt.% and 12.5 wt.% under solar and visible light, respectively. This has been attributed to the existence of different light-mediated reaction mechanisms. The optimum LaFeO₃/TiO₂ composite photocatalyst was active and stable after several runs under solar light with leached iron concentration below 0.1 mg/L in solution.

Z-Scheme LaCoO3/g-C3N4 for Efficient Full-Spectrum Light-Simulated Solar Photocatalytic Hydrogen Generation

Photocatalytic decomposition of water is the most attractive method for the sustainable production of hydrogen, but the development of a highly active and low-cost catalyst remains a major challenge. Here, we report the preparation of LaCoO3/g-C3N4 nanosheets and the utilization of LaCoO3 instead of noble metals to improve the photocatalytic activity for the production of hydrogen. First, LaCoO3 was successfully prepared by the sol-gel method, and then a series of highly efficient Z-scheme LaCoO3/g-C3N4 heterojunction photocatalysts were synthesized by the solvothermal method. Various characterization techniques (X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-vis) diffuse reflectance spectroscopy (DRS), photoluminescence (PL), transient photocurrent response test, electron paramagnetic resonance (EPR)) confirm that the heterostructure and interfacial interaction had been formed between LaCoO3 nanoparticles and g-C3N4 nanosheets. In the photocatalytic water splitting test, LaCoO3/g-C3N4-20 wt % exhibited the highest photocatalytic activity of 1046.15 μmol h-1 g-1, which is 3.5 and 1.4 times higher than those of LaCoO3 and g-C3N4, respectively. This work leads to an inexpensive and efficient LaCoO3/g-C3N4 photocatalysis system for water splitting or other photocatalytic applications.

The high photocatalytic efficiency and stability of LaNiO3/g-C3N4 heterojunction nanocomposites for photocatalytic water splitting to hydrogen

A binary direct Z-scheme LaNiO₃/g-C₃N₄ nanocomposite photocatalyst consisted with LaNiO₃ nanoparticles and g-C₃N₄ nanosheets was successfully synthesized by means of mechanical mixing and solvothermal methods in order to improve the photocatalytic water splitting activity. The as-prepared materials were characterized by powder X-ray diffraction (XRD), Scanning Electron microscope (SEM), Transmission Electron microscope (TEM), X-ray photoelectron spectroscope (XPS), Fourier Transform Infrared Spectroscopy (FT-IR) and N₂ adsorption–desorption experiments, respectively, demonstrating the formation of interfacial interaction and heterogeneous structure in LaNiO₃/g-C₃N₄ nanocomposites. Under UV-light irradiation, the LaNiO₃/g-C₃N₄ samples which without the addition of any noble metal as co-catalyst behaved enhanced photocatalytic water splitting activity compared with pure LaNiO₃ and g-C₃N₄, owing to the Z-scheme charge carrier transfer pathway. Especially, the LaNiO₃/70%g-C₃N₄ nanocomposite reach an optimal yield of up to 3392.50 µmol g⁻¹ in 5 h and held a maximum H₂ evolution rate of 678.5 µmol h⁻¹ g⁻¹ that was 5 times higher than that of pure LaNiO₃.

High potential and robust ternary LaFeO3/CdS/carbon quantum dots nanocomposite for photocatalytic H2 evolution under sunlight illumination

Exploitation of the novel, robust, and advanced photocatalytic systems with high efficiency is the present demand for clean, green, and sustainable energy production. Carbon quantum dots (CQDs) have attracted tremendous interest in efficient H₂ evolution from photocatalysis due to its remarkable visible-light harvesting and electron transport properties. Here, for the first time, a smart ternary nanocomposite comprises encapsulated CQDs with LaFeO₃ spherical nanoparticles and CdS nanorods is synthesized by a simple hydrothermal procedure for the efficient photocatalytic H₂ evolution under sunlight illumination. PXRD, FT-IR, FE-SEM, TEM, and XPS studies are performed to ensure the successful fabrication of ternary LaFeO₃/CdS/CQD nanocomposite. The efficient H₂ evolution rate (HER) of 25,302 μmol h^-1 g_cat^-1 is achieved for LaFeO₃/CdS/CQD nanocomposite, which is 602.4, 2.6, 29.8, 2.0 and 1.1 times higher than that of pristine LaFeO₃, pristine CdS, and composites such as LaFeO₃/CdS, LaFeO₃/CQD, and CdS/CQD. Photocurrent and lifetime PL studies reveal, encapsulation of CQDs with the LaFeO₃/CdS heterojunction can facilitate easy and efficient separation of photo-generated excitons. Altogether the fabrication of CQDs provides an ideal avenue for the development of high potential advanced photocatalytic systems for sustainable H₂ production with remarkable efficiencies.

Photo-Fenton removal of tetracycline hydrochloride using LaFeO3 as a persulfate activator under visible light

In this work, LaFeO₃ nanoparticles were fabricated by a facile sol-gel method and applied to degrade tetracycline hydrochloride (TC-HCl) through heterogeneous activation of persulfate under visible-light illumination. The structure, compositions, photocatalytic properties, and morphological features of the as-obtained sample were investigated by XRD, XPS, DRS, and FESEM techniques. Optimizations of dosage of LaFeO₃ (0-0.4 g/L), dosage of PS (0-4 g/L), concentration of TC-HCl (10 ppm-80 ppm), and pH of initial solution (2.09-9.59) were conducted. Radical trapping experiments indicated that SO₄^- was the dominant radical for TC-HCl removal while OH was also involved. In addition, LaFeO₃ was proved with excellent stability and reusability in degrading TC-HCl molecules in the Vis/LaFeO₃/PS system. The findings of this work revealed the potential application of the Vis/LaFeO₃/PS system toward degrading organic pollutants in wastewater.

In-situ formation of carboxylate species on TiO2 nanosheets for enhanced visible-light photocatalytic performance

It still remains challenge for expanding the photo-response range of TiO₂ with dominant {0 0 1} facets due to the hardly achieving modification of the electronic structure without destroying the formation of TiO₂ high energy facets. Herein, we report the construction of carboxylate species modified TiO₂ nanosheets with dominant {0 0 1} facets by employing ethanol as a carbon source through a low-temperature (300 °C) carbonization method. The as-obtained samples were investigated in detail by using various characterization techniques. The results indicate that the carboxylate species derived from the oxidation and carbonization of ethanol are coordinated to the {0 0 1} facets in a bidentate bridging mode. The electron-withdrawing carboxylate species induce TiO₂ to form a lower valence band edge and a narrower bandgap, which enhances the oxidation ability of photogenerated holes and expands the photo-response range. The partially carbonized carboxylate species can also act as a photosensitizer to induce visible-light photocatalytic activity of TiO₂ nanosheets. In addition, the carboxylate species can further promote the separation of photogenerated charge carriers. The findings of this work may provide a new perspective for tuning the band structure of TiO₂ with dominant {0 0 1} facets and improving its photocatalytic performance.

Superior Adsorption and Photocatalytic Degradation Capability of Mesoporous LaFeO3/g-C3N4 for Removal of Oxytetracycline

Mesoporous LaFeO3/g-C3N4 Z-scheme heterojunctions (LFC) were synthesized via the incorporation of LaFeO3 nanoparticles and porous g-C3N4 ultrathin nanosheets. The as prepared LFC were characterized by transmission electron microscopy, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, powder X-ray diffraction, Raman spectra and N2 adsorption analysis. The structural analysis indicated that the reheating process and the addition of NH4Cl in the thermal polymerization were the key factors to get porous g-C3N4 ultrathin nanosheets and to obtain high specific surface areas of LFC. It remarkably enhanced the adsorption capacity and photocatalytic degradation of LFC for removal of oxytetracycline (OTC). The effect of the mass percentage of LaFeO3 in LFC, pH and temperature on the OTC adsorption was investigated. The LaFeO3/g-C3N4 heterojunction with 2 wt % LaFeO3 (2-LFC) exhibited highest saturated adsorption capacity (101.67 mg g−1) and largest photocatalytic degradation rate constant (1.35 L g−1 min−1), which was about 9 and 5 times higher than that of bulk g-C3N4 (CN), respectively. This work provided a facile method to prepare mesoporous LaFeO3/g-C3N4 heterojunctions with especially well adsorption and photocatalytic activities for OTC, which can facilitate its practical applications in pollution control.

Experimental and DFT Studies of Au Deposition Over WO3/g-C3N4 Z-Scheme Heterojunction

A typical Z-scheme system is composed of two photocatalysts which generate two sets of charge carriers and split water into H₂ and O₂ at different locations. Scientists are struggling to enhance the efficiencies of these systems by maximizing their light absorption, engineering more stable redox couples, and discovering new O₂ and H₂ evolutions co-catalysts. In this work, Au decorated WO₃/g-C₃N₄ Z-scheme nanocomposites are fabricated via wet-chemical and photo-deposition methods. The nanocomposites are utilized in photocatalysis for H₂ production and 2,4-dichlorophenol (2,4-DCP) degradation. It is investigated that the optimized 4Au/6% WO₃/CN nanocomposite is highly efficient for production of 69.9 and 307.3 µmol h^-1 g^-1 H₂ gas, respectively, under visible-light (λ > 420 nm) and UV-visible illumination. Further, the fabricated 4Au/6% WO₃/CN nanocomposite is significant (i.e., 100% degradation in 2 h) for 2,4-DCP degradation under visible light and highly stable in photocatalysis. A significant 4.17% quantum efficiency is recorded for H₂ production at wavelength 420 nm. This enhanced performance is attributed to the improved charge separation and the surface plasmon resonance effect of Au nanoparticles. Solid-state density functional theory simulations are performed to countercheck and validate our experimental data. Positive surface formation energy, high charge transfer, and strong non-bonding interaction via electrostatic forces confirm the stability of 4Au/6% WO₃/CN interface.

Facile Synthesis of SnO2/LaFeO3-XNX Composite: Photocatalytic Activity and Gas Sensing Performance

Here SnO2/LaFeO3-XNX composite was fabricated using a wet chemical method and was applied to pollutants degradation and gas sensing for the first time. The composite exhibits high performance for photocatalytic degradation of Rhodamine B (RhB) dye and selectivity sensing of various gases. On the basis of the completed experiments, the improved RhB degradation and selective gas sensing performance resulted from the extended optical absorption via N2 incorporated surface states and enhanced charge separation via coupling SnO2. Using the scavengers trapping experiments, the superoxide radical (O2•-) was investigated as the major scavenger involved in the degradation of RhB over SnO2/LaFeO3-XNX composite. In this paper, the probable reaction steps involved in the RhB dye degradation over SnO2/LaFeO3-XNX composite are proposed. This work will provide reasonable strategies to fabricate LaFeO3-based proficient and stable catalysts for environmental purification. In addition, the result of the selectivity of gas performance is also presented.

Perovskite-type LaFeO3: Photoelectrochemical Properties and Photocatalytic Degradation of Organic Pollutants Under Visible Light Irradiation

Perovskite-type oxides lanthanum ferrite (LaFeO3) photocatalysts were successfully prepared by a facile and cost-effective sol-gel method using La(NO)3 and Fe(NO)3 as metal ion precursors and citric acid as a complexing agent at different calcination temperatures. The properties of the resulting LaFeO3 samples were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDXS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (IR), transmission electron microscopy (TEM), N2 adsorption/desorption and photoelectrochemical tests. The photoactivity of the LaFeO3 samples was tested by monitoring the photocatalytic degradation of Rhodamine B (RhB) and 4-chlorophenol (4-CP) under visible light irradiation, the highest photocatalytic activity was found for LaFeO3 calcined at 700 °C, which attributed to the relatively highest surface area (10.6 m2/g). In addition, it was found from trapping experiments that the reactive species for degradation were superoxide radical ions (O2−) and holes (h+). Photocurrent measurements and electrochemical impedance spectroscopy (EIS) proved the higher photo-induced charge carrier transfer and separation efficiency of the LaFeO3 sample calcined at 700 °C compared to that that calcined at 900 °C. Band positions of LaFeO3 were estimated using the Mott-Schottky plots, which showed that H2 evolution was not likely.

Synthesis of LaFeO3/Ag2CO3 Nanocomposites for Photocatalytic Degradation of Rhodamine B and p-Chlorophenol under Natural Sunlight

Novel LaFeO3/Ag2CO3 nanocomposites are synthesized by co-precipitation method for photocatalytic degradation of Rhodamine B (RhB) and p-chlorophenol under visible light irradiation. Heterostructures between LaFeO3 and Ag2CO3 semiconductors are formed during the synthesis of these nanocomposites. Among the nanocomposites prepared with different ratios of LaFeO3 and Ag2CO3, 1% LaFeO3/Ag2CO3 shows the highest photocatalytic activity for the degradation of RhB. Maximum electron-hole pair decoupling efficiency is observed in 1% LaFeO3/Ag2CO3, which causes the greater activity of the heterostructure. Degradation efficiency of 99.5% for RhB and 59% for p-chlorophenol has been obtained under natural sunlight within 45 min. Interestingly, the stability of Ag2CO3 is improved dramatically after making nanocomposite, and no decomposition of the catalyst was observed even after several photocatalytic cycles. Reactive oxygen species scavenging experiments with p-benzoquinone, isopropyl alcohol, and ammonium oxalate suggest that a major degradation process is caused by holes. Degradation of RhB into small organic moieties is detected using LC-MS technique. Further, the efficient mineralization of the degradation products occurs during the catalytic process.

A facile synthesis method for fabrication of LaFeO3/g-C3N4nanocomposite as efficient visible-light-driven photocatalyst for photodegradation of RhB and 4-CP

A solid state method for the large scale synthesis of LaFeO₃/g-C₃N₄nanocomposite with enhanced visible-light photocatalytic degradation activity.

A novel n-type CdS nanorods/p-type LaFeO3 heterojunction nanocomposite with enhanced visible-light photocatalytic performance

In this work, a novel n-type CdS nanorods/p-type LaFeO₃ (CdS NRs/LFO) nanocomposite was prepared, for the first time, via a facile solvothermal method. The as-prepared n-CdS NRs/p-LFO nanocomposite was characterized by using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), vibrating sample magnetometry (VSM), photoluminescence (PL) spectroscopy, and Brunauer–Emmett–Teller (BET) surface area analysis. All data revealed the attachment of the LFO nanoparticle on the surface of CdS NRs. This novel nanocomposite was applied as a novel visible light photocatalyst for the degradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes under visible-light irradiation. Under optimized conditions, the degradation efficiency was 97.5% for MB, 80% for RhB and 85% for MO in the presence of H₂O₂ and over CdS NRs/LFO nanocomposite. The photocatalytic activity of CdS NRs/LFO was almost 16 and 8 times as high as those of the pristine CdS NRs and pure LFO, respectively. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron–hole pairs induced by the remarkable synergistic effects of CdS and LFO semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that ·OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated energy band positions, the mechanism for the enhanced photocatalytic activity was proposed.

A novel n–p CdS nanorods/LaFeO₃ (CdS NRs/LFO) heterojunction nanocomposite was prepared via a solvothermal route and applied as a visible-light photocatalyst for enhanced degradation of organic dye pollutants.

WS2/g-C3N4 composite as an efficient heterojunction photocatalyst for biocatalyzed artificial photosynthesis

A heterogeneous WS₂/g-C₃N₄ composite photocatalyst was prepared by a facile ultrasound-assisted hydrothermal method.

Photocatalytic hydrogen evolution performance of NiS cocatalyst modified LaFeO3/g-C3N4 heterojunctions

NiS cocatalyst modified LaFeO₃/g-C₃N₄ heterostructures were prepared and their enhanced photocatalytic hydrogen evolution performance under visible light irradiation was presented.