Synthesis of battery-grade FePO4·2H2O using high-pressure hydrolyzed precipitates of cobalt-iron alloy acid solution

Herein, we developed a facile method for the synthesis of battery-grade ferric phosphate (FePO4·2H2O) using high-pressure hydrolyzed precipitates of cobalt-iron alloy acid solution. The size of the prepared FePO4·2H2O samples was about 5-10 μm, and the microstructure of FePO4·2H2O was polyhedral. The FePO4·2H2O samples exhibited a high Fe/P ratio (1.03) compared with standard ferric phosphate (0.98-1.02), indicating potentially good electrochemical performance. The significance of the current work is that we have developed an effective method for the resource utilization of solid waste containing iron.

Removal of Cu(II) by sodium hexametaphosphate and nano zero-valent iron modified calcium bentonite: characteristic, adsorption performance and mechanism

Cu (II) is a toxic heavy metal commonly identified in groundwater contaminants. Bentonite-based cutoff wall is the most used method in isolating and adsorbing contaminants, while the bentonite in it easily to fail due to Cu(II) exchange. This study synthesized a novel material through the modification of calcium bentonite (CaB) utilizing sodium hexametaphosphate (SHMP) and nano zero-valent iron (NZVI). The characteristics, adsorption performance, and mechanism of the NZVI/SHMP-CaB were investigated comprehensively. The results showed that SHMP can disperse CaB and reduce flocculation, while NZVI can be further stabilized without agglomeration. The best adsorption performance of NZVI/SHMP-CaB could be obtained at the dosage of 2% SHMP and 4% NZVI. The NZVI/SHMP-CaB exhibited an outstanding removal efficiency of over 60% and 90% at a high Cu(II) concentration (pH = 6, Cu(II) = 300 mg/L) and acidic conditions (pH = 3-6, Cu(II) = 50 mg/L), respectively. The adsorption of Cu(II) by NZVI/SHMP-CaB followed a pseudo-second-order kinetic model, and fitting results from the Freundlich isothermal model suggested that the adsorption process occurred spontaneously. Besides the rapid surface adsorption on the NZVI/SHMP-CaB and ion exchange with interlayer ions in bentonite, the removal mechanism of Cu(II) also involved the chemical reduction to insoluble forms such as Cu0 and Cu2O. The generated FePO4 covered the surface of the homogenized NZVI particles, enhancing the resistance of NZVI/SHMP-CaB to acidic and oxidative environments. This study indicates that NZVI/SHMP-CaB is a promising alternative material which can be used for heavy metal removal from contaminated soil and water.

Interaction and mechanisms in the phosphate-binding of iron(oxyhydr)oxide core-shell nanoparticles

HYPOTHESIS

The high binding affinity of iron(oxyhydr)oxides for phosphate has recently been used in medicine to treat hyperphosphatemia, an abnormally elevated phosphate concentration in the blood. For iron(oxyhydr)oxide nanoparticles, the composition of the organic shell has a more significant influence on their interaction with phosphate than is often assumed. This study shows different mechanisms in phosphate binding, using the example of two similar new phosphate-binding agents.

EXPERIMENTS

We characterized the phosphate-binding behavior of two iron(oxyhydr)oxide-based nanomaterials with similar composition and particle properties and investigated their binding mechanisms by spectroscopic methods.

FINDINGS

For the often prescribed Velphoro, we demonstrated a phosphate binding capacity of>210 mg/g. A similar active ingredient named C-PAM binds over 573 mg/g. Spectroscopic measurements highlighted differences in the binding mechanism. While Velphoro binds phosphate via surface complexation independent of pH and adsorbent concentration, C-PAM shows a strong concentration dependence. At low concentrations, phosphate is bound via complexation reactions. The iron(oxyhydr)oxide structure was dissolved at higher phosphate concentrations and formed various iron phosphate species. The substances behave differently upon interaction with phosphate, although being very similar in composition and crystal structure. Thus, we demonstrated a crucial influence of the ligands in the shell on the binding mechanism.

Phytate exudation by the roots of Pteris vittata can dissolve colloidal FePO4

Phosphorus (P) is limiting nutrient in many soils, and P availability may often depend on iron (Fe) speciation. Colloidal iron phosphate (FePO_4coll) is potentially present in soils, and we tested the hypothesis that phytate exudation by Pteris vittata might dissolve FePO_4coll by growing the plant in nutrient solution to which FePO_4coll was added. The omission of P and Fe increased phytate exudation by P. vittata from 434 to 2136 mg kg^-1 as the FePO_4coll concentration increased from 0 to 300 mM. The total P in P. vittata tissue increased from 2880 to 8280 mg kg^-1, and the corresponding increases in the trichloroacetic acid (TCA) extractable P fractions were inorganic P (860-5100 mg kg^-1), soluble organic P (250-870 mg kg^-1), and insoluble organic P (160-2030 mg kg^-1). That is, FePO₄-solubilizing activity was positive correlated with TP, TCA P fractions in P. vittata, TP in growth media, and root exudates. This study shows that phytate exudation dissolved FePO_4coll due to the chelation effect of phytic acid on Fe; however, the wider question of whether phytic acid excretion was prompted by deprivation of P, Fe, or both remains to be answered.

FeCl3-Modified Carbonaceous Catalysts from Orange Peel for Solvent-Free Alpha-Pinene Oxidation

The work presents the synthesis of FeCl₃-modified carbonaceous catalysts obtained from waste orange peel and their application in the oxidation of alpha-pinene in solvent-free reaction conditions. The use of waste orange peel as presented here (not described in the literature) is an effective and cheap way of managing this valuable and renewable biomass. FeCl₃-modified carbonaceous materials were obtained by a two-stage method: in the first stage, activated carbon was obtained, and in the second stage, it was modified by FeCl₃ in the presence of H₃PO₄ (three different molar ratios of these two compounds were used in the studies). The obtained FeCl_3-modified carbon materials were subjected to detailed instrumental studies using the methods FT-IR (Fourier-transform Infrared Spectroscopy), XRD (X-ray Diffraction), SEM (Scanning Electron Microscope), EDXRF (Energy Dispersive X-ray Fluorescence) and XPS (X-ray Photoelectron Spectroscopy), while the textural properties of these materials were also studied, such as the specific surface area and total pore volume. Catalytic tests with the three modified activated carbons showed that the catalyst obtained with the participation of 6 M of FeCl₃ and 3 M aqueous solutions of H₃PO₄ was the most active in the oxidation of alpha-pinene. Further tests (influence of temperature, amount of catalyst, and reaction time) with this catalyst made it possible to determine the most favorable conditions for conducting oxidation on this type of catalyst, and allowed study of the kinetics of this process. The most favorable conditions for the process were: temperature of 100 °C, catalyst content of 0.5 wt% and reaction time 120 min (very mild process conditions). The conversion of the organic raw material obtained under these conditions was 40 mol%, and the selectivity of the transformation to alpha-pinene oxide reached the value of 35 mol%. In addition to the epoxy compound, other valuable products, such as verbenone and verbenol, were formed while carrying out the process.

Novel Green Method for the Synthesis of Monoacetin over Bifunctional Cu-Cr Phosphates under the CO2 Atmosphere

Monoacetin was synthesized using a novel green method in which acetonitrile was hydrolyzed and then esterified with glycerol over Cu-Cr phosphates under the CO₂ atmosphere. Monoacetin was synthesized with high yield (87.6% glycerol conversion and 86.3% monoacetin selectivity) through this one-pot cascade method. In this process, acetonitrile can react with water to form acetamide and further undergo esterification with glycerol. There are two main reasons for obtaining monoacetin in high yield: (1) the interaction of CO₂ with high-temperature liquid water enhances the acid strength of the reaction system and then promotes the activation of acetonitrile; and (2) the introduction of Cr species causes a synergistic effect between Cu and Cr species to adjust the acidity and basicity of the catalyst. The introduction of Cr species converts eight-coordinated Cu²⁺ into four-coordinated Cu²⁺ to improve the acidity of the catalyst. The introduction of Cr species also causes the surface oxygen to be transformed into lattice oxygen to enhance the basicity of the catalyst. These bimetallic phosphate materials may provide a new pathway for the application of acid-base bifunctional catalytic reactions.

Modified iron phosphate/polyvinyl alcohol composite film for controlled-release fertilisers

A new concept of citric acid-stimulus P fertiliser via incorporation of ferric phosphate as P source in polyvinyl alcohol films.