Characterization and modelling of Langmuir interfaces with finite elasticity

Chemistry, applications, and future prospects of structured liquids

Structured liquids are emerging functional soft materials that combine liquid flowability with solid-like structural stability and spatial organization. Here, we delve into the chemistry and underlying principles of structured liquids, ranging from nanoparticle surfactants (NPSs) to supramolecular assemblies and interfacial jamming. We then highlight recent advancements related to the design of intricate all-liquid 3D structures and examine their reconfigurability. Additionally, we demonstrate the versatility of these soft functional materials through innovative applications, such as all-liquid microfluidic devices and liquid microreactors. We envision that in the future, the vast potential of the liquid-liquid interface combined with human creativity will pave the way for innovative platforms, exemplified by current developments like liquid batteries and circuits. Although still in its nascent stages, the field of structured liquids holds immense promise, with future applications across various sectors poised to harness their transformative capabilities.

Advances in sample environments for neutron scattering for colloid and interface science

This review describes recent advances in sample environments across the full complement of applicable neutron scattering techniques to colloid and interface science. Temperature, pressure, flow, tensile testing, ultrasound, chemical reactions, IR/visible/UV light, confinement, humidity and electric and magnetic field application, as well as tandem X-ray methods, are all addressed. Consideration for material choices in sample environments and data acquisition methods are also covered as well as discussion of current and potential future use of machine learning and artificial intelligence.

Viscoelasticity of a carbon nanotube-laden air-water interface

The viscoelasticity of a carbon nanotube (CNT)-laden air-water interface was characterized using two different experimental methods. The first experimental method used a Langmuir-Pockels (LP) trough coupled with a pair of oscillating barriers. The second method is termed the Bicone-Trough (BT) method, where a LP trough was custom-built and fit onto a rheometer equipped with a bicone fixture to standardize the preparation and conditioning of a particle-laden interface especially at high particle coverages. The performance of both methods was evaluated by performing Fast Fourier Transform (FFT) analysis to calculate the signal-to-noise ratios (SNR). Overall, the rheometer-based BT method offered better strain control and considerably higher SNRs compared to the Oscillatory Barriers (OB) method that oscillated barriers with relatively limited positional and speed control. For a CNT surface coverage of 165 mg/m2 and a frequency of 100 mHz, the interfacial shear modulus obtained from the OB method increased from 39 to 57 mN/m as the normal strain amplitude increased from 1 to 3%. No linear viscoelastic regime was experimentally observed for a normal strain as small as 0.5%. In the BT method, a linear regime was observed below a shear strain of 0.1%. The interfacial shear modulus decreased significantly from 96 to 2 mN/m as the shear strain amplitude increased from 0.025 to 10%.

Model aggregated 2D suspensions in shear and compression: From a fluid layer to an auxetic interface?

HYPOTHESIS

Particle-laden interfaces play a crucial role in engineering stability of multiphase systems. However, a full understanding of the mechanical properties in shear and compression, especially in relation to the underlying microstructural changes, is as yet lacking. In this study, we investigate the interfacial rheological moduli in heterogeneous networks of aggregated 2D suspensions using different deformation modes and relate these moduli to changes in the microstructure.

EXPERIMENTS

Interfacial rheological experiments were conducted at different surface coverages and clean kinematic conditions, namely in (i) simple shear flow in a modified double wall-ring geometry and (ii) isotropic compression in a custom-built radial trough, while monitoring the evolution of the microstructure.

FINDINGS

The compressive moduli increase non-monotonically with decreasing void fraction, reflecting the combined effect of aggregate densification and reduction of void structures, with rotation of rigid clusters playing a significant role in closing voids. However, the shear moduli increase monotonically, which correlates with the increase in fractal dimension of the aggregates making up the backbone network. We also observe that these interfaces act as 2D auxetic materials at intermediate coverages, which is surprising given their amorphous structure. This finding has potential implications for the resilience of particle-coated bubbles or droplets subjected to time-varying compression-expansion deformations.

A new instrument for interfacial dilational rheology

We present a new design for an interfacial dilational rheometer that can generate oscillatory dilational strain on a planar air-liquid interface. The strain is generated by a pneumatic mechanism involving a deformable film, which forms a circular barrier that can contract or expand under different pressures. The interfacial stress is measured using a Wilhelmy rod. We carefully examine and demonstrate the effects of potential sources of measurement error, including inertia, drag, buoyancy, flow from the bulk phase, and surface waves. The design avoids mixed deformations present in other instruments and is currently capable of accurate measurements at frequencies up to ∼0.1 Hz and dilational strains below 0.001, with potential for higher frequencies after further theoretical development. We demonstrate the integration of the interfacial dilational rheometer with a Langmuir trough by measuring the compression isotherm of an insoluble surfactant, stearic acid. Furthermore, we verify the capability of the interfacial dilational rheometer to perform frequency and amplitude sweeps and present the storage and loss moduli for a water-soluble surfactant, sodium dodecylbenzenesulfonate, at different concentrations.

Oil-in-Water Emulsions Stabilized by Hydrophilic Homopolymers

Most of the polymeric emulsifiers have diblock and triblock copolymer architecture containing hydrophilic and hydrophobic domains. In this work, we show that hydrophilic homopolymers can be effective stabilizers of oil-in-water emulsions. Using polyethelyne oxide and poly(vinylpyrrolidone) as model hydrophilic homopolymers and n-decane and n-hexane as model nonpolar phases, we show that high-molecular weight polymers can stabilize emulsions over 24 h beyond a threshold concentration. We highlight the role of the molecular weight and concentration of the polymer in the stability of emulsions through kinetic measurements of emulsion volume, microscopic analysis, interfacial tension, and dilational rheology. We explain the mechanism of stabilization to stem from buoyancy-driven creaming of emulsion drops and film drainage and dilational elasticity of the interface in relation to the molecular weights and concentrations of polymers. This study demonstrates that water-soluble homopolymers can stabilize oil-in-water emulsions and open avenues for the use of eco-friendly biopolymers, which are inherently hydrophilic, as an alternative to synthetic emulsifiers.

Antibodies Adsorbed to the Air-Water Interface Form Soft Glasses

When monoclonal antibodies are exposed to an air-water interface, they form aggregates, which negatively impacts their performance. Until now, the detection and characterization of interfacial aggregation have been difficult. Here, we exploit the mechanical response imparted by interfacial adsorption by measuring the interfacial shear rheology of a model antibody, anti-streptavidin immunoglobulin-1 (AS-IgG1), at the air-water interface. Strong viscoelastic layers of AS-IgG1 form when the protein is adsorbed from the bulk solution. Creep experiments correlate the compliance of the interfacial protein layer with the subphase solution pH and bulk concentration. These, along with oscillatory strain amplitude and frequency sweeps, show that the viscoelastic behavior of the adsorbed layers is that of a soft glass with interfacial shear moduli on the order of 10-3 Pa m. Shifting the creep compliance curves under different applied stresses forms master curves consistent with stress-time superposition of soft interfacial glasses. The interfacial rheology results are discussed in the context of the interface-mediated aggregation of AS-IgG1.

Towards predicting shear-banding instabilities in lipid monolayers

Langmuir monolayers are advantageous systems used to investigate how lipid membranes get involved in the physiology of many living structures, such as collapse phenomena in alveolar structures. Much work focuses on characterizing the pressure-bearing capacity of Langmuir films, expressed in the form of isotherm curves. These show that monolayers experience different phases during compression with an according evolution of their mechanical response, incurring into instability events when a critical stress threshold is overcome. Although well-known state equations, which establish an inverse relationship between surface pressure and area change, are able to properly describe monolayer behaviour during liquid expanded phase, the modelling of their nonlinear behaviour in the subsequent condensed region is still an open issue. In this regard, most efforts are addressed to explain out-of-plane collapse by modelling buckling and wrinkling mainly resorting to linearly elastic plate theory. However, some experiments on Langmuir monolayers also show in-plane instability phenomena leading to the formation of the so-called shear bands and, to date, no theoretical description of the onset of shear banding bifurcation in monolayers has been yet provided. For this reason, by adopting a macroscopic description, we here study material stability of the lipid monolayers and exploit an incremental approach to find the conditions that kindle shear bands. In particular, by starting from the widely assumed hypothesis that monolayers behave elastically in the solid-like region, in this work a hyperfoam hyperelastic potential is introduced as a new constitutive strategy to trace back the nonlinear response of monolayer response during densification. In this way, the obtained mechanical properties together with the adopted strain energy are successfully employed to reproduce the onset of shear banding exhibited by some lipid systems under different chemical and thermal conditions.

Dilatational and shear rheology of soluble and insoluble monolayers with a Langmuir trough

HYPOTHESIS

The surface dilatational and shear moduli of surfactant and protein interfacial layers can be derived from surface pressures measured with a Wilhelmy plate parallel, ΔΠpar and perpendicular ΔΠperp to the barriers in a Langmuir trough.

EXPERIMENTAL

Applying area oscillations, A0+ ΔAeiωt, in a rectangular Langmuir trough induces changes in surface pressure, ΔΠpar and ΔΠperp for monolayers of soluble palmitoyl-lysophosphatidylcholine (LysoPC), insoluble dipalmitoylphosphatidylcholine (DPPC), and the protein β-lactoglobulin to evaluate Es∗+Gs∗=A0ΔΠparΔA and Es∗-Gs∗=A0ΔΠperpΔA. Gs∗ was independently measured with a double-wall ring apparatus (DWR) and Es∗ by area oscillations of hemispherical bubbles in a capillary pressure microtensiometer (CPM) and the results were compared to the trough measurements.

FINDINGS

For LysoPC and DPPC, A0ΔΠparΔA≅A0ΔΠperpΔA meaning Es∗≫Gs∗ and Es∗≅A0ΔΠparΔA≅A0ΔΠperpΔA. Trough values for Es∗ were quantitatively similar to CPM when corrected for interfacial curvature. DWR showed G∗ was 4 orders of magnitude smaller than Es∗ for both LysoPC and DPPC. For β-lactoglobulin films, A0ΔΠparΔA>A0ΔΠperpΔA and Es∗ and Gs∗ were in qualitative agreement with independent CPM and DWR measurements. For β-lactoglobulin, both Es∗ and Gs∗ varied with film age and history on the trough, suggesting the evolution of the protein structure.

Interfacial rheology of model water-air microgels laden interfaces: Effect of cross-linking

HYPOTHESIS

The mechanical properties of model air/water interfaces covered by poly(N-isopropylacrylamide) microgels depend on the microgels deformability or in other words on the amount of cross-linker added during synthesis.

EXPERIMENTS

The study is carried out by measuring the apparent dilational, the compression and the shear moduli using three complementary methods: (1) the pendant drop method with perturbative areas, (2) the Langmuir trough compression, and (3) shear rheology using a double wall ring cell mounted onto a Langmuir through.

FINDINGS

In the range of surface coverages studied, the interfaces exhibit a solid-like behavior and elasticity goes through a maximum as a function of the surface pressure. This is observable whatever the investigation method. This maximum elasticity depends on the microgel deformability: the softer the microgels the higher the value of the moduli. The mechanical behavior of model interfaces is discussed, taking into account the core-shell structure of the particles and their packing at the interface.

Instrument for measurement of interfacial structure-property relationships with decoupled interfacial shear and dilatational flow: "Quadrotrough"

Understanding the interfacial structure-property relationship of complex fluid-fluid interfaces is increasingly important for guiding the formulation of systems with targeted interfacial properties, such as those found in multiphase complex fluids, biological systems, biopharmaceuticals formulations, and many consumer products. Mixed interfacial flow fields, typical of classical Langmuir trough experiments, introduce a complex interfacial flow history that complicates the study of interfacial properties of complex fluid interfaces. In this article, we describe the design, implementation, and validation of a new instrument capable of independent application of controlled interfacial dilation and shear kinematics on fluid interfaces. Combining the Quadrotrough with both in situ Brewster angle microscopy and neutron reflectometry provides detailed structural measurements of the interface at the mesoscale and nanoscale in relationship to interfacial material properties under controlled interfacial deformation histories.

Recent Advances in the Interfacial Shear and Dilational Rheology of Polymer Systems: From Fundamentals to Applications

The study of the viscoelastic properties of polymer systems containing huge internal two-dimensional interfacial areas, such as blends, foams and multilayer films, is of growing interest and plays a significant role in a variety of industrial fields. Hence, interfacial rheology can represent a powerful tool to directly investigate these complex polymer–polymer interfaces. First, the current review summarizes the theoretical basics and fundamentals of interfacial shear rheology. Particular attention has been devoted to the double-wall ring (DWR), bicone, Du Noüy ring and oscillating needle (ISR) systems. The measurement of surface and interfacial rheological properties requires a consideration of the relative contributions of the surface stress arising from the bulk sub-phases. Here, the experimental procedures and methodologies used to correct the numerical data are described considering the viscoelastic nature of the interface. Second, the interfacial dilational rheology is discussed, starting with the theory and underlying principles. In particular, the Langmuir trough method, the oscillating spinning drop technique and the oscillating pendant drop technique are investigated. The major pioneering studies and latest innovations dedicated to interfacial rheology in both shear and dilatation–compression are highlighted. Finally, the major challenges and limits related to the development of high-temperature interfacial rheology at the molten state are presented. The latter shows great potential for assessing the interfaces of polymer systems encountered in many high-value applications.

Adsorption of Polar Species at Crude Oil-Water Interfaces: the Chemoelastic Behavior

We investigate the formation and properties of crude oil/water interfacial films. The time evolution of interfacial tension suggests the presence of short and long timescale processes reflecting the competition between different populations of surface-active molecules. We measure both the time-dependent shear and extensional interfacial rheology moduli. Late-time interface rheology is dominated by elasticity, which results in visible wrinkles on the crude oil drop surface upon interface disturbance. We also find that the chemical composition of the interfacial films is affected by the composition of the aqueous phase that it has contacted. For example, sulfate ions promote films enriched with carboxylic groups and condensed aromatics. Finally, we perform solution exchange experiments and monitor the late-time film composition upon the exchange. We detect the film composition change upon replacing chloride solutions with sulfate-enriched ones. To the best of our knowledge, we are the first to report the composition alteration of aged crude oil films. This finding might foreshadow an essential crude oil recovery mechanism.

The rheology of confined colloidal hard disks

Colloids may be treated as “big atoms” so that they are good models for atomic and molecular systems. Colloidal hard disks are, therefore, good models for 2d materials, and although their phase behavior is well characterized, rheology has received relatively little attention. Here, we exploit a novel, particle-resolved, experimental setup and complementary computer simulations to measure the shear rheology of quasi-hard-disk colloids in extreme confinement. In particular, we confine quasi-2d hard disks in a circular “corral” comprised of 27 particles held in optical traps. Confinement and shear suppress hexagonal ordering that would occur in the bulk and create a layered fluid. We measure the rheology of our system by balancing drag and driving forces on each layer. Given the extreme confinement, it is remarkable that our system exhibits rheological behavior very similar to unconfined 2d and 3d hard particle systems, characterized by a dynamic yield stress and shear-thinning of comparable magnitude. By quantifying particle motion perpendicular to shear, we show that particles become more tightly confined to their layers with no concomitant increase in density upon increasing the shear rate. Shear thinning is, therefore, a consequence of a reduction in dissipation due to weakening in interactions between layers as the shear rate increases. We reproduce our experiments with Brownian dynamics simulations with Hydrodynamic Interactions (HI) included at the level of the Rotne–Prager tensor. That the inclusion of HI is necessary to reproduce our experiments is evidence of their importance in transmission of momentum through the system.

Emulsion characterization via microfluidic devices: A review on interfacial tension and stability to coalescence

Emulsions have gained significant importance in many industries including foods, pharmaceuticals, cosmetics, health care formulations, paints, polymer blends and oils. During emulsion generation, collisions can occur between newly-generated droplets, which may lead to coalescence between the droplets. The extent of coalescence is driven by the properties of the dispersed and continuous phases (e.g. density, viscosity, ion strength and pH), and system conditions (e.g. temperature, pressure or any external applied forces). In addition, the diffusion and adsorption behaviors of emulsifiers which govern the dynamic interfacial tension of the forming droplets, the surface potential, and the duration and frequency of the droplet collisions, contribute to the overall rate of coalescence. An understanding of these complex behaviors, particularly those of interfacial tension and droplet coalescence during emulsion generation, is critical for the design of an emulsion with desirable properties, and for the optimization of the processing conditions. However, in many cases, the time scales over which these phenomena occur are extremely short, typically a fraction of a second, which makes their accurate determination by conventional analytical methods extremely challenging. In the past few years, with advances in microfluidic technology, many attempts have demonstrated that microfluidic systems, characterized by micrometer-size channels, can be successfully employed to precisely characterize these properties of emulsions. In this review, current applications of microfluidic devices to determine the equilibrium and dynamic interfacial tension during droplet formation, and to investigate the coalescence stability of dispersed droplets applicable to the processing and storage of emulsions, are discussed.

Surface Tension and the Strain-Dependent Topography of Soft Solids

When stretched in one direction, most solids shrink in the transverse directions. In soft silicone gels, however, we observe that small-scale topographical features grow upon stretching. A quantitative analysis of the topography shows that this counterintuitive response is nearly linear, allowing us to tackle it through a small-strain analysis. We find that the surprising increase of small-scale topography with stretch is due to a delicate interplay of the bulk and surface responses to strain. Specifically, we find that surface tension changes as the material is deformed. This response is expected on general grounds for solid materials, but challenges the standard description of gel and elastomer surfaces.

Deviation from Equilibrium Thermodynamics of an Asphaltene Model Compound during Compression-Expansion Experiments at Fluid-Fluid Interfaces

Asphaltenes play a crucial role in crude oil behavior, and model compounds are often used to capture, mimic, and predict certain interfacial properties. In previous works, sorption of an asphaltene model compound (C5PeC11) was studied using surface pressure isotherms, where a deviation from the expected thermodynamic behavior of the interface during decane-water and air-water compression experiments was observed but not explained. In this work, the interfacial behavior of C5PeC11 was assessed at the decane-water and the air-water interfaces using a multiscale approach that includes: compression-expansion experiments on rectangular and radial Langmuir troughs, dynamic interfacial stress relaxation, and fluorescence microscopy imaging. Connections between molecular and microscopic phenomena strongly suggest that the nonthermodynamic response can be explained through a dynamic effect whose origin lies in the predominance of intermolecular forces in C5PeC11 molecules over the mechanical compression force applied. When aggregation begins at the air-water interface, stable structures are formed, and the nonthermodynamic phenomenon is not observed in subsequent compressions. However, at the decane-water interface, the initial aggregation is not consolidated due to the effect of the oil phase on the free energy of the interface allowing the high reproducibility of the dynamic effect in subsequent compression cycles. These results highlight the need to probe interfacial systems at various length scales to adequately separate equilibrium thermodynamics from dynamic responses.

A miniaturized radial Langmuir trough for simultaneous dilatational deformation and interfacial microscopy

INNOVATION

Interfacial rheological properties of complex fluid-fluid interfaces are strongly influenced by the film microstructure. Experimental investigations for correlating interfacial morphology and rheology are notoriously challenging. A miniaturized radial Langmuir trough was developed to study complex fluid-fluid interfaces under purely dilatational deformations that operates in tandem with a conventional inverted microscope for simultaneous interfacial visualization.

EXPERIMENTS

Two materials were investigated at an air-water interface: poly(tert-butyl methacrylate) (PtBMA) and dipalmitoylphosphatidylcholine (DPPC). Surface pressure measurements made in the radial Langmuir trough were compared with a commercial rectangular Langmuir trough. Interfacial in situ visualization for each material was performed during the compression cycle in the radial trough. Challenges associated with the small size of the radial Langmuir trough, such as the influence of capillary deformation on the measured surface pressure, are also quantified.

FINDINGS

Measured surface pressures between the newly developed radial trough and the rectangular Langmuir trough compare well. Micrographs obtained in the radial Langmuir trough were used to obtain film properties such as Young's modulus. The new advance in colloid and interface science is the ability to capture structure-property relationships of planar interfaces using microscopy and purely dilatational deformation. This will advance the development of constitutive modeling of complex fluid-fluid interfaces.

Assessing the Interfacial Activity of Insoluble Asphaltene Layers: Interfacial Rheology versus Interfacial Tension

Asphaltenes have been suggested to play an important role in the remarkable stability of some water-in-crude oil emulsions, although the precise mechanisms by which they act are not yet fully understood. Being one of the more polar fractions in crude oils, asphaltenes are surface active and strongly adsorb at the oil/water interface, and as the interface becomes densely packed, solid-like mechanical properties emerge, which influence many typical interfacial experiments. The present work focuses on purposefully measuring the rheology in the limit of an insoluble, spread Langmuir monolayer in the absence of adsorption/desorption phenomena. Moreover, the changes in surface tension are deconvoluted from the purely mechanical contribution to the surface stress by experiments with precise interfacial kinematics. Compression "isotherms" are combined with the measurement of both shear and dilatational rheological properties to evaluate the relative contributions of mechanical versus thermodynamic aspects, i.e., to evaluate the "interfacial rheological" versus the standard interfacial activity. The experimental results suggest that asphaltene nanoaggregates are not very efficient in lowering interfacial tension but rather impart significant mechanical stresses. Interestingly, physical aging effects are not observed in the spread layers, contrary to results for adsorbed layers. By further studying asphaltene fractions of different polarity, we investigate whether mere packing effects or strong interactions determine the mechanical response of the dense asphaltene systems as either soft glassy or gel-like responses have been reported. The compressional and rheological data reflect the dense packing, and the behavior is captured well by the soft glassy rheology model, but a more complicated multilayer structure may develop as coverage is increased. Potential implications of the experimental observations on these model and insoluble interfaces for water-in-crude oil emulsion stability are briefly discussed.

Single bubble and drop techniques for characterizing foams and emulsions

The physics of foams and emulsions has traditionally been studied using bulk foam/emulsion tests and single film platforms such as the Scheludko cell. Recently there has been a renewed interest in a third class of techniques that we term as single bubble/drop tests, which employ isolated whole bubbles and drops to probe the characteristics of foams and emulsions. Single bubble and drop techniques provide a convenient framework for investigating a number of important characteristics of foams and emulsions, including the rheology, stabilization mechanisms, and rupture dynamics. In this review we provide a comprehensive discussion of the various single bubble/drop platforms and the associated experimental measurement protocols including the construction of coalescence time distributions, visualization of the thin film profiles and characterization of the interfacial rheological properties. Subsequently, we summarize the recent developments in foam and emulsion science with a focus on the results obtained through single bubble/drop techniques. We conclude the review by presenting important venues for future research.

Surface pressure of liquid interfaces laden with micron-sized particles

We consider the surface pressure of a colloid-laden liquid interface. As micron-sized particles of suitable wettability can be irreversibly bound to the liquid interface on experimental timescales, we use the canonical ensemble to derive an expression for the surface pressure of a colloid-laden interface. We use this expression to show that adsorption of particles with only hard-core interactions has a negligible effect on surface pressures from typical Langmuir-trough measurements. Moreover, we show that Langmuir-trough measurements cannot be used to extract typical interparticle potentials. Finally, in the case of relatively weakly interacting sterically stabilized particles at a liquid interface, we argue that the dependence of measured surface pressure on surface fraction can be explained by particle coordination number at low to intermediate particle surface fractions. At high surface fractions, where the particles are jammed and cannot easily rearrange, we argue that contact-line sliding and/or deformations of the liquid interface at the length scale of the particles might play a pivotal role.

Probing Interfacial Structure and Dynamics of Model and Natural Asphaltenes at Fluid-Fluid Interfaces

Asphaltenes are largely responsible for crude oil interfacial behavior. Due to their complex molecular nature, studying connections between interfacial properties and molecular structure is challenging, and these connections remain unclear. Several groups have reported on the interfacial behavior of asphaltenes, but a unified picture of both interfacial dynamics and thermodynamics is still missing. We seek to establish connections between asphaltene interfacial morphology and interfacial dynamics by combining interfacial dilatational deformation with microscopic structural imaging analysis. Understanding the behavior of natural asphaltene samples is made difficult by the inherent molecular variability. Therefore, we have also studied the behavior of an asphaltene model compound to draw fundamental structure-property relationships. This work contains simultaneous interfacial deformation and microscopy in systems of natural and model asphaltenes at air-water and decane-water interfaces. How the dynamics of natural asphaltenes influences the morphological and thermodynamic state of the air-water and decane-water interfaces is discussed based on the deviations observed between isotropic and anisotropic deformations. Areas where model asphaltenes can help us to understand the behavior of natural asphaltenes are identified such as its high surface pressure activity and aggregation character. An aggregation mechanism for model and natural asphaltenes is proposed based on an observed relationship between microscopic and millimetric aggregates.

Molecularly Designed Interfacial Viscoelasticity by Dendronized Polymers: From Flexible Macromolecules to Colloidal Objects

The thermodynamic and rheological properties of densely packed dendronized polymers (DPs) at water-air interfaces were studied here for first- and fourth-generation DPs (PG1, PG4) with both small (P_n ≈ 50) and large (P_n ≈ 500) backbone degrees of polymerization. The excellent control over the structural characteristics of these polymers enabled us to investigate how the interfacial properties change as we go from thin, flexible macromolecules toward thicker molecular objects that display colloidal features. The effects of the dendron generation, affecting the persistence length, as well as the degree of polymerization and surface pressure on the formation of DP layers at the water-air interface were studied. Surface pressure measurements and interfacial rheology suggest the existence of significant attractive interactions between the molecules of the higher generation DPs. While all DPs featured reproducible Π-A diagrams, successive compression-expansion cycles and surface pressure relaxation experiments revealed differences in the stability of the formed films, which are consistent with the variations in shape persistence and interactions between the studied DPs. Atomic force microscopy after Langmuir-Blodgett transfer of the films displayed a nanostructuring that can be attributed to the increase in attractive forces with increasing polymer generation and anisotropy. The importance of such structures on the surface properties was probed by interfacial shear rheology, which validated the existence of strong albeit brittle structures for fourth-generation DPs. Ultimately, we demonstrate how in particular rod-like DPs can be used as robust foam stabilizers.

Relaxation Behavior and Nonlinear Surface Rheology of PEO-PPO-PEO Triblock Copolymers at the Air-Water Interface

Surface dilatational viscoelasticity of adsorbed layers of pluronics triblock copolymers at the air-water interface was measured using the oscillating barrier technique. The effect of molecular architecture and concentration on surface viscoelasticity was explored for two different types of pluronics with different degrees of hydrophobicity, Pluronic F-108 (M_w ≈ 14 600 g/mol) and Pluronic P-123 (M_w ≈ 5800 g/mol), the former exhibiting a larger hydrophilic to hydrophobic block length ratio. Frequency sweeps in the linear regime suggested that interfacial films of F-108 have higher surface limiting elasticity and larger in-plane and out-of-plane relaxation times at the same bulk concentration (the former possibly related to in-plane microstructure rearrangements, the latter to surface/bulk diffusion). Increasing the bulk concentration of pluronics from 1 to 100 μM led to a decrease in both in- and out-of-plane relaxation times. Large amplitude oscillatory dilatation (LAOD) tests were performed to capture nonlinear behavior of these interfacial films by means of elastic and viscous Lissajous plots. Nonlinearities in elastic responses were quantified through calculation of the strain-stiffening indices in extension S_E and compression S_C. Both pluronics exhibited strain softening in extension. In compression, P-123 showed strain-hardening and F-108 displayed a relatively linear response. Apparent strain hardening in extension was observed for the P-123 adsorbed film, at high strain, at a bulk concentration of 100 μM. However, at these strains, the response was dominated by the viscous contribution and calculation of strain rate-thickening factors in extension and compression showed that the overall response was strain rate-thinning in extension and strain rate-thickening in compression.

Building Reconfigurable Devices Using Complex Liquid-Fluid Interfaces

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. Here, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

Amphiphile-Induced Anisotropic Colloidal Self-Assembly

Spherical colloidal particles typically self-assemble into hexagonal lattices when adsorbed at liquid interfaces. More complex assembly structures, including particle chains and phases with square symmetry, were theoretically predicted almost two decades ago for spherical particles interacting via a soft repulsive shoulder. Here, we demonstrate that such complex assembly phases can be experimentally realized with spherical colloidal particles assembled at the air/water interface in the presence of molecular amphiphiles. We investigate the interfacial behavior of colloidal particles in the presence of different amphiphiles on a Langmuir trough. We transfer the structures formed at the interface onto a solid substrate while continuously compressing, which enables us to correlate the prevailing assembly phase as a function of the available interfacial area. We observe that block copolymers with similarities to the chemical nature of the colloidal particles, as well as the surface-active protein bovine serum albumin, direct the colloidal particles into complex assembly phases, including chains and square arrangements. The observed structures are reproduced by minimum energy calculations of hard core-soft shoulder particles with experimentally realistic interaction parameters. From the agreement between experiments and theory, we hypothesize that the presence of the amphiphiles manipulates the interaction potential of the colloidal particles. The assembly of spherical colloidal particles into complex assembly phases on solid substrates opens new possibilities for surface patterning by enriching the library of possible structures available for colloidal lithography.

Surface elastic constants of a soft solid

Solid interfaces have intrinsic elasticity. However, in most experiments, this is obscured by bulk stresses. Through microscopic observations of the contact-line geometry of a partially wetting droplet on an anisotropically stretched substrate, we measure two surface-elastic constants that quantify the linear dependence of the surface stress of a soft polymer gel on its strain. With these two parameters, one can predict surface stresses for general deformations of the material in the linear-elastic limit.

Interfacial rheology of model particles at liquid interfaces and its relation to (bicontinuous) Pickering emulsions

Interface-dominated materials are commonly encountered in both science and technology, and typical examples include foams and emulsions. Conventionally stabilised by surfactants, emulsions can also be stabilised by micron-sized particles. These so-called Pickering-Ramsden (PR) emulsions have received substantial interest, as they are model arrested systems, rather ubiquitous in industry and promising templates for advanced materials. The mechanical properties of the particle-laden liquid-liquid interface, probed via interfacial rheology, have been shown to play an important role in the formation and stability of PR emulsions. However, the morphological processes which control the formation of emulsions and foams in mixing devices, such as deformation, break-up, and coalescence, are complex and diverse, making it difficult to identify the precise role of the interfacial rheological properties. Interestingly, the role of interfacial rheology in the stability of bicontinuous PR emulsions (bijels) has been virtually unexplored, even though the phase separation process which leads to the formation of these systems is relatively simple and the interfacial deformation processes can be better conceptualised. Hence, the aims of this topical review are twofold. First, we review the existing literature on the interfacial rheology of particle-laden liquid interfaces in rheometrical flows, focussing mainly on model latex suspensions consisting of polystyrene particles carrying sulfate groups, which have been most extensively studied to date. The goal of this part of the review is to identify the generic features of the rheology of such systems. Secondly, we will discuss the relevance of these results to the formation and stability of PR emulsions and bijels.