Two new quinoline-based regenerable fluorescent probes with AIE characteristics for selective recognition of Cu2+ in aqueous solution and test strips

Two AIE-active Schiff base fluorescent probes for highly selective recognition of Cu2+ ions

Two helical Schiff base compounds (H4TPA and H4TPE) containing a triphenylamine (TPA) or tetraphenylethylene (TPE) scaffold were successfully synthesized and characterized. Both H4TPA and H4TPE exhibited typical aggregation-induced emission characteristics in the mixed solvent of THF/H2O. The two compounds also showed high selectivity and sensitivity for the recognition of Cu2+ over other ions in THF/HEPES (1:4, V/V, pH = 7.4, 2.0 × 10-5 M), and could be used as turn-off fluorescent probes for Cu2+. The stoichiometric ratios and association constants were estimated via Job's plots and UV-vis spectra titration, and the detection limits of H4TPA and H4TPE toward Cu2+ were calculated to be 2.41 × 10-7 M and 1.38 × 10-7 M, respectively. Besides, the crystal structure of the complex obtained from the interaction of H4TPA with Cu2+ well illustrated the binding modes, which helped us understand the Cu2+ recognition mechanism of H4TPA and H4TPE. Moreover, the detection of Cu2+ and spiked recovery experiments were carried out, which indicated that the two probes can be applied to Cu2+ detection in real samples with satisfactory recoveries.

Recent advances in AIEgen-based chemosensors for small molecule detection, with a focus on ion sensing

Since the aggregation-based emission (AIE) phenomenon emerged in 2001, numerous chemical designs have been built around the AIE concept, displaying its utility for diverse applications, including optics, electronics, energy, and biosciences. The present review critically evaluates the broad applicability of AIEgen-based chemical models towards sensing small analytes and the structural design strategies adjusting the mode of action reported since the last decade. Various AIEgen models have been discussed, providing qualitative and quantitative estimation of cationic metal ions and anionic species, as well as biomolecular, cellular, and organelle-specific probes. A systematic overview of the reported structural design and the underlying working mode will pave the way for designing and developing the next generation of AIEgens for specific applications.

Dual-source signal amplification electrochemiluminescence sensor combined with molecularly imprinted polymers for the imidacloprid detection

A novel lanthanide metal-organic-gel (MOG)-derived material/nitrogen-doped graphdiyne (Tb-Ru-MOG/CeO2/N-GDY) composite with a dual-source signal amplification strategy was prepared and used to construct a molecularly imprinted sensor based on bifunctional monomers for the detection of imidacloprid (IMI) using electrochemiluminescence (ECL). In a green reaction environment, terbium (III) (Tb3+) can undergo multiple coordination reactions with 4'-(4-carboxyphenyl)-2,2':6',2″-terpyridine (Hcptpy) and tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)32+), and combine with ceria nanoparticles (CeO2 NPs) to form Tb-Ru-MOG/CeO2. Within the Tb-Ru-MOG/CeO2 framework, energy transfer from the double ligands can sensitize the central Tb3+, triggering a distinct antenna effect and energy-transfer, and its polyporous configuration offered a nanoconfined space for Ce3+/Ce4+ to effectively catalyze coreactant radicals (S2O82-), leading to in-situ endogenous activation ECL reactions. The conductive N-GDY accelerated electron movement and increased the loading on the electrode surface, enhancing the exogenous excitation of the ECL signals. Leveraging the synergistic effect of the bifunctional monomer, the synthesized molecularly imprinted polymers (MIPs) ECL sensor demonstrated a wide detection range from 10 nM to 10,000 nM for IMI, with a limit of detection (LOD) of 1.37 nM, showcasing an innovative concept for the dual-source strategy of signal amplification in integrated ECL composites to analyze food and environmental hazards.

Synthesis and Application of 1,8-Naphthalimide Derivatives Fluorescent Probe for Sequential Recognition of Cu2+ and H2PO4. J Fluoresc 2024:10.1007/s10895-024-03692-y. [PMID: 38613712 DOI: 10.1007/s10895-024-03692-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

A naphthalimide Schiff base fluorescent probe (BSS) was designed and synthesized from 4-bromo-1,8-naphthalic anhydride, and its structure was characterized by 1HNMR, 13CNMR, FTIR, and MS. Fluorescence emission spectra showed that probe BSS could realize the "turn-off" detection of Cu2+ in acetonitrile solution, detection process with strong specificity and excellent anti-interference of other metal ions. In the fluorescence titration experiments, fluorescence intensity of BSS showed a good linear relationship with the Cu2+ concentration (0-10 µmol/L), and the detection limit was up to 7.0 × 10- 8 mol/L. Meanwhile, BSS and Cu2+ could form a 1:1 complex (BSS-Cu2+) during the reaction process. Under the same detection conditions, complex BSS-Cu2+ had specific fluorescence recovery properties for H2PO4- and the whole process was not only fast (6 s) but also free of interference from other anions, with a detection limit was as low as 5.7 × 10- 8 mol/L. In addition, complex BSS-Cu2+ could be successfully applied to the detection of H2PO4- in actual water samples, which with excellent application prospects.

An ESIPT solvatochromic fluorescent and colorimetric probe for sensitive and selective detection of copper ions in environmental samples and cell lines

Copper is one of the most important transition metals in our body for various physiological functions. An imbalance in the homeostasis of copper in our body can lead to various neurological disorders such as Alzheimer's disease, Parkinson's, and Menkes disease. As a result, there is a need for the detection of excess copper present in the environment and the human system. In this work, we have designed a quinoline-based fluorescent/colorimetric probe (QHS) for rapid and selective detection of copper ions via quenching of fluorescence/color change from yellow to peach which is visible to the naked eye. The probe displayed high selectivity towards copper(II), i.e., Cu(II) in the presence of different metal analytes in water samples. The sensing mechanism of the probe was confirmed by NMR, HRMS, IR spectroscopy, and SEM. The detection limit of Cu(II) ions was found to be 0.493 μM which is lower than the tolerable limit of copper (20 μM) in drinking water as per the EPA. The probe was also utilized for the visualization of Cu(II) in cell lines. The probe was also demonstrated for its application in real-time detection of aqueous samples using portable paper strips.

A novel electrochemical sensor based on gold nanobipyramids and poly-L-cysteine for the sensitive determination of trilobatin

Trilobatin is a flavonoid that has wide application prospects due to its various pharmacological effects, such as anti-inflammation and anti-oxidation. In this work, a novel electrochemical sensor based on gold nanobipyramids (AuNBs) and L-cysteine (L-cys) was constructed for the sensitive and selective determination of trilobatin. The AuNBs, which were prepared by a seed-mediated growth method, had large specific surface areas and excellent electrical conductivity. A layer of L-cys film, which provided more active sites through the amino and hydroxyl groups, was modified on the surface of the AuNBs by electropolymerization. Significantly, the Au-S bond between the L-cys film and AuNBs could improve the stability of the sensor and it exhibited satisfactory electrocatalytic oxidation activity for trilobatin. Under optimized conditions, the sensor based on poly-L-cys/AuNBs/GCE was used to determine trilobatin by differential pulse voltammetry (DPV). Two wide linear ranges between the current peak and the concentration of trilobatin were obtained in the range from 5 to 100 μM and 100 to 1000 μM, and the low detection limit (LOD) was up to 2.55 μM (S/N = 3). The sensor demonstrated desirable reproducibility, stability, and selectivity and was applied to detect real trilobatin samples extracted from Lithocarpus polystachyus Rehd.'s leaves, showing recoveries of 98.36%-104.96%, with satisfactory results.

Development in Fluorescent OFF-ON Probes Based on Cu2+ Promoted Hydrolysis Reaction of the Picolinate Moiety

Anions and cations have a key role in our normal life. Cu²⁺ ion is a crucial trace element accountable for the part of several cellular enzymes and proteins, including cytochrome c oxidase, dopamine monooxygenase, Cu/Zn superoxide dismutase, and ceruloplasmin. WHO has found the extreme acceptable level of Cu²⁺ ions in drinking water is up to 2.0 ppm. Excess use of Cu²⁺ ions is associated with various human genetic disorders. Thus, the visualization of Cu²⁺ ions to avoid its toxic effects in chemical and biological systems is significant. In this review we have summarized sensors based on catalytic hydrolysis of picolinate to detect Cu²⁺ ions. The sensors based on hydrolysis of picolinate are very selective as compared to the other sensors for Cu²⁺ ions detection. We have focused on describing the structure, spectral properties, detection limits, and bioimaging model of the sensors.

Detection of Tomato Ringspot Virus Based on Microfluidic Impedance Sensor

A microfluidic impedance sensor embedded with gold interdigitated array microelectrodes was utilized to rapidly detect Tomato Ringspot Virus (ToRSV) and achieve efficient and precise detection. The electrochemical impedance spectrum was obtained by immobilizing ToRSV antibody on the surface of a gold interdigital array microelectrode and mixing it with ToRSV to generate an impedance change. The electrochemical impedance spectrum was obtained. The equivalent circuit was established to analyze the mechanism of impedance change, and the quantitative linear relationship between ToRSV concentration and impedance was established. According to an equivalent circuit analysis, ToRSV increases the solution resistance Rs, the electron transfer resistance Ret on the electrode surface, and the double layer capacitance Cdl, resulting in an increase in impedance. The results reveal that the ToRSV concentration detected in the range of 0.001 to 10 μg/mL ranges from 248.8 to 687.2 kΩ at the ideal detection frequency of 10.7 Hz, with a good linear connection, R² = 0.98. When this method's detection limit is tested, the impedance value is 367.68 kΩ. 0.0032 μg/mL was the detection limit. The sensor is quick and easy to use, has high detection sensitivity, and can be used to detect other plant viruses.

One-Pot Synthesis of HRP&SA/ZIF-8 Nanocomposite and Its Application in the Detection of Insecticidal Crystalline Protein Cry1Ab

This study reported the functionality integration of zeolitic imidazolate framework-8 (ZIF-8) with horseradish peroxidase (HRP) and streptavidin (SA) for the synthesis of a HRP&SA/ZIF-8 nanocomposite through one-pot coprecipitation. The synthesized HRP&SA/ZIF-8 nanocomposite was then employed as the ideal signal tag for application in the enzyme-linked immunosorbent assay (ELISA) and exhibited excellent sensitivity, selectivity and accuracy in the detection of insecticidal crystalline (Cry) protein Cry1Ab as a transgenic biomarker with a detection limit of 4.8 pg/mL. This proposed method provides a new way for the detection of transgenic biomarkers in food and may inspire further integration of a variety of biomolecules into ZIF-8 for applications ranging from biosensing, biomedicine, and catalysis to energy.

A novel AIE fluorescent probe for the monitoring of aluminum ions in living cells and zebrafish

A novel fluorescent probe BTD with aggregation induced emission (AIE) characteristics for the monitoring of Al³⁺ was developed. This fluorescent probe could be used to detect Al³⁺ in aqueous solution under mild conditions, along with high sensitivity and high selectivity. The detection limit of the probe BTD for Al³⁺ is as low as 3.25 nM, which is below the WHO recommendation concentration (7.41 μM) for drinking water. Furthermore, this probe was successfully applied to the sensing of Al³⁺ in living cells and zebrafish.

A Novel Reversible Fluorescent Probe for Cu2+and S2-Ions and Imaging in Living Cells

A novel fluorescent probe TSOC (thiazole salicylaldehyde oxazole chlorinated) was synthesized based on benzothiazole conjugated olefinic bond with salicylicaldehyde unit as fluorophore and a phenyl oxazole unit as bonding unit. The probe could reversibly detect of Cu2+ and S2- over other common ions with longer emission and large stokes shift in an aqueous solution at pH 7.3 (DMSO-Hepes, v/v, 5:1, 10 mM). The bonding mechanism was supported through the titration experiment of fluorescence and absorption spectroscopy, 1H-NMR titration, HR-MS and DFT calculations. Moreover, the probe further exhibited good cell permeability and were successfully used to visualize Cu2+ and S2- in living cells.

Irreversible coumarin based fluorescent probe for selective detection of Cu2+ in living cells

Copper ion (Cu²⁺) is an essential part of the living organisms. Cu²⁺ ions play a vital role in many biotic processes. An abnormal amount of Cu²⁺ ions may result in serious diseases. Herein, a novel "fluorescent ON" probe NC-Cu to trace minute levels of Cu²⁺ ions in presence of various biological active species has been developed. Lysosomal cells targeting group (Morpholine) was added to the probe. The spectral properties of probe NC-Cu were recorded in HEPES buffer (0.01 M, pH = 7.4, comprising 50% CH₃CN, λ_ex = 430 nm, slit: 5 nm). The synthesized probe NC-Cu work based on copper promoted catalytic hydrolysis of hydrazone and shows remarkable fluorescence enhancement. The reaction of the probe with Cu²⁺ ions was completed within 20 min. An excellent linear relationship (R² = 0.9952) was found and the limit of detection (LOD, according to the 3σ/slope) for Cu²⁺ ions was calculated to be 5.8 µM. Furthermore, NC-Cu was effectively functional in the living cells (KYSE30 cells) to trace Cu²⁺ ions.

Recent Applications of Pillar[n]arene-Based Host-Guest Recognition in Chemosensing and Imaging

Pillar[n]arene is a novel kind of synthetic supramolecular macrocyclic host characterized by its particular pillar-shaped structure consisting of an electron-rich cavity and two finely adjustable rims. Benefiting from its rigid structure, facile synthesis, ease of functionalization, and outstanding host-guest chemistry, pillar[n]arene shows great potential for diverse applications. Significantly, the host-guest recognition of pillar[n]arene provides a novel approach for chemosensing and imaging. Herein, this Review critically and comprehensively reviews the applications of pillar[n]arene-based host-guest recognition in chemosensing and imaging. The sensing and imaging mechanisms as well as the unique roles and advantages of pillar[n]arene-based host-guest recognition are summarized. In addition, preparations of hybrid materials based on pillar[n]arene and inorganic materials are also introduced comprehensively in the light of chemosensing and imaging. Finally, current challenges and perspectives on pillar[n]arene-based host-guest recognition in chemosensing and imaging are outlined.

Zinc (II) and AIEgens: The "Clip Approach" for a Novel Fluorophore Family. A Review

Aggregation-induced emission (AIE) compounds display a photophysical phenomenon in which the aggregate state exhibits stronger emission than the isolated units. The common term of "AIEgens" was coined to describe compounds undergoing the AIE effect. Due to the recent interest in AIEgens, the search for novel hybrid organic-inorganic compounds with unique luminescence properties in the aggregate phase is a relevant goal. In this perspective, the abundant, inexpensive, and nontoxic d10 zinc cation offers unique opportunities for building AIE active fluorophores, sensing probes, and bioimaging tools. Considering the novelty of the topic, relevant examples collected in the last 5 years (2016-2021) through scientific production can be considered fully representative of the state-of-the-art. Starting from the simple phenomenological approach and considering different typological and chemical units and structures, we focused on zinc-based AIEgens offering synthetic novelty, research completeness, and relevant applications. A special section was devoted to Zn(II)-based AIEgens for living cell imaging as the novel technological frontier in biology and medicine.

AIEgens: An emerging fluorescent sensing tool to aid food safety and quality control

As a global public health problem, food safety has attracted increasing concern. To minimize the risk exposure of food to harmful ingredients, food quality and safety inspection that covers the whole process of "from farm to fork" is much desired. Fluorescent sensing is a promising and powerful screening tool for sensing hazardous substances in food and thus plays a crucial role in promoting food safety assurance. However, traditional fluorphores generally suffer the problem of aggregation-caused quenching (ACQ) effect, which limit their application in food quality and safety inspection. In this regard, luminogens with aggregation-induced emission property (AIEgens) showed large potential in food analysis since AIEgens effectively surmount the ACQ effect with much better detection sensitivity, accuracy, and robustness. In this contribution, we review the latest developments of food safety monitoring by AIEgens, which will focus on the molecular design of AIEgens and their sensing principles. Several examples of AIE-based sensing applications for screening food contaminations are highlighted, and future perspectives and challenges in this emerging field are tentatively elaborated. We hope this review can motivate new research ideas and interest to aid food safety and quality control, and facilitate more collaborative endeavors to advance the state-of-the-art sensing developments and reduce actual translational gap between laboratory research and industrial production.

Recyclable fluorescent chemodosimeters based on 8-hydroxyquinoline derivatives for highly sensitive and selective detection of mercury(II) in aqueous media and test strips

Four novel highly selective 8-hydroxyquinoline-based fluorescent chemodosimeters (1-4) were synthesized for the rapid analysis of Hg²⁺ in aqueous solution and on paper strips, which probably attributed to the excited state intramolecular proton transfer (ESIPT) process. Chemodosimeter 1 was evaluated as a Hg²⁺-ratiometric fluorescent sensor while others (2, 3 and 4) displayed fluorescence turn-on response for Hg²⁺ among the various survey metal ions. We demonstrated that chemodosimeters (1-4) could recognized Hg²⁺ ions based on a 1:1 stoichiometric binding event with fast detection time. More importantly, the detection limits for Hg²⁺ could reach at 10^-9 M level except chemodosimeter 1 (4.05 × 10^-8 M). In addition, it was found that chemodosimeters (1-4) were recycled efficiently because the Hg²⁺ induced emission spectra were reversed after adding NaBH₄. Finally, these four sensors were successfully applied for fabrication of simple device test strips for rapid and on-site detection of Hg²⁺ ions.

A quinoline-based probe for effective and selective sensing of aspartic acid in aqueous medium: in vitro and in vivo live cell imaging

A highly sensitive and selective “on–off–on” chemosensor for aspartic acid in aqueous solution was established. In vitro live cell imaging against MCF 7 cells and in vivo imaging using C. elegans were successfully demonstrated.