Novel cross-linkable fluorescent probe with oriented antibody to enhance lateral immunoassay strip for the detection of acetamiprid

Time-resolved fluorescent lateral immunoassay strip (TRFLIS) is a reliable and rapid method for detecting acetamiprid. However, its sensitivity is often affected by the structural patterns and stability of the fluorescent probe. Researchers have shown significant interests in using goat anti-mouse IgG (GaMIgG) which is indirectly bound to time-resolved fluorescent microsphere (TRFM) and antibody. This allowed for oriented modification of the antibody. However, the stability of fluorescent probe in this binding mode remained unexplored. Herein, 1-ethyl-(3-dimethylaminopropyl) carbodiimide hydrochloride was innovatively used as a cross-linking agent to enhance the binding of antibody to GaMIgG, which improved the stability of the fluorescent probe. Under optimal working conditions, this strategy exhibited a wide linear response range of 5-700 ng/mL. Its limit of detection (LOD) was 0.62 ng/mL, the visual LOD was 5 ng/mL, and the limit of quantification (LOQ) of 2.06 ng/mL. Additionally, under tomato matrix, leek matrix and Chinese cabbage matrix, the linear response ranges were 5-400, 5-300, and 5-700 ng/mL, with LODs of 0.16, 0.60, and 0.41 ng/mL, with LOQs of 0.53, 2.01 and 1.37 ng/mL, respectively. In conclusion, this strategy effectively reduced the dosage of acetamiprid antibody compared with TRFM directly linking acetamiprid antibody, and greatly increased the sensitivity of TRFLIS. Meanwhile, it demonstrated outstanding specificity and accuracy in acetamiprid detection and had been successfully applied to vegetable samples. This method enables rapid and accurate detection of large-volume samples by combining qualitative and quantitative methods. As such, it has great potential in the development of low-cost and high-performance immunochromatographic platforms.

Development of a "Signal-On" Fluorescent Aptasensor for Highly Selective and Sensitive Detection of ZEN in Cereal Products Using Nitrogen-Doped Carbon Dots Based on the Inner Filter Effect

This study aimed to develop a novel fluorescent aptasensor for the quantitative detection of zearalenone (ZEN), addressing the limitations of conventional detection techniques in terms of speed, sensitivity, and ease of use. Nitrogen-doped carbon dots (N-CDs) were synthesized via the hydrothermal method, resulting in spherical particles with a diameter of 3.25 nm. These N-CDs demonstrated high water solubility and emitted a bright blue light at 440 nm when excited at 355 nm. The fluorescence of N-CDs was quenched by dispersed gold nanoparticles (AuNPs) through the inner filter effect, while aggregated AuNPs induced by NaCl did not affect the fluorescence of N-CDs. The aptamer could protect AuNPs from NaCl-induced aggregation, but the presence of ZEN weakened this protective effect. Based on this principle, optimal conditions for ZEN detection included 57 mM NaCl, 12.5 nM aptamer concentration, incubation of AuNPs with NaCl for 15 min in Tris-EDTA(TE) buffer, and incubation of aptamer with ZEN and NaCl for 30 min. Under these optimized conditions, the "signal-on" fluorescent aptasensor for ZEN detection showed a linear range of 0.25 to 200 ng/mL with a low detection limit of 0.0875 ng/mL. Furthermore, the developed aptasensor exhibited excellent specificity and could rapidly detect ZEN in corn flour samples or corn oil, achieving satisfactory recovery rates ranging from 84.7% to 108.6%. Therefore, this study presents an economical, convenient, sensitive, and rapid method for accurately quantifying ZEN in cereal products.

Enhancing Sensitivity and Selectivity in Pesticide Detection: A Review of Cutting-Edge Techniques

The primary goal of our review was to systematically explore and compare the state-of-the-art methodologies employed in the detection of pesticides, a critical component of global food safety initiatives. New approach methods in the fields of luminescent nanosensors, chromatography, terahertz spectroscopy, and Raman spectroscopy are discussed as precise, rapid, and versatile strategies for pesticide detection in food items and agroecological samples. Luminescent nanosensors emerge as powerful tools, noted for their portability and unparalleled sensitivity and real-time monitoring capabilities. Liquid and gas chromatography coupled to spectroscopic detectors, stalwarts in the analytical chemistry field, are lauded for their precision, wide applicability, and validation in diverse regulatory environments. Terahertz spectroscopy offers unique advantages such as noninvasive testing, profound penetration depth, and bulk sample handling. Meanwhile, Raman spectroscopy stands out with its nondestructive nature, its ability to detect even trace amounts of pesticides, and its minimal requirement for sample preparation. While acknowledging the maturity and robustness of these techniques, our review underscores the importance of persistent innovation. These methodologies' significance extends beyond their present functions, highlighting their adaptability to meet ever-evolving challenges. Environ Toxicol Chem 2024;43:1468-1484. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Metal-organic framework (MOF)-based biosensors for miRNA detection

MicroRNAs (miRNAs) play several crucial roles in the physiological and pathological processes of the human body. They are considered as important biomarkers for the diagnosis of various disorders. Thus, rapid, sensitive, selective, and affordable detection of miRNAs is of great importance. However, the small size, low abundance, and highly similar sequences of miRNAs impose major challenges to their accurate detection in biological samples. In recent years, metal-organic frameworks (MOFs) have been applied as promising sensing materials for the fabrication of different biosensors due to their distinctive characteristics, such as high porosity and surface area, tunable pores, outstanding adsorption affinities, and ease of functionalization. In this review, the applications of MOFs and MOF-derived materials in the fabrication of fluorescence, electrochemical, chemiluminescence, electrochemiluminescent, and photoelectrochemical biosensors for the detection of miRNAs and their detection principle and analytical performance are discussed. This paper attempts to provide readers with a comprehensive knowledge of the fabrication and sensing mechanisms of miRNA detection platforms.

Smartphone-integrated paper-based sensing platform for the visualization and quantitative detection of pymetrozine

Pymetrozine (PYM) is an effective pyridine insecticide for controlling aphids, while its residues pose a serious threat to human health. Herein, a europium complex (Eu-DBPA, DBPA represents deprotonated 2,5-dibromoterephthalic acid ligand) probe was prepared for the detection of PYM via fluorescence quenching. The detection process has the advantages of short response time (2 min), wide linear range (0-4 and 4-45 mg/kg) and low detection limit (2.2 μg/kg). Furthermore, a portable detection platform was designed by integrating Eu-DBPA-based paper strip with smartphone and applied for the visual detection of PYM in real cucumber, tomato, cabbage and apple samples, obtaining satisfactory recovery (99.00 %-107.00 %) and low standard deviation (RSD < 3.4 %). In addition, a logic gate device was designed to simplify the detection process. The smartphone-integrated paper-based probe detection platform provides a new strategy for intelligent and online identification of hazards in environmental and biological samples.

Developments in food neonicotinoids detection: novel recognition strategies, advanced chemical sensing techniques, and recent applications

Neonicotinoid insecticides (NEOs) are a new class of neurotoxic pesticides primarily used for pest control on fruits and vegetables, cereals, and other crops after organophosphorus pesticides (OPPs), carbamate pesticides (CBPs), and pyrethroid pesticides. However, chronic abuse and illegal use have led to the contamination of food and water sources as well as damage to ecological and environmental systems. Long-term exposure to NEOs may pose potential risks to animals (especially bees) and even human health. Consequently, it is necessary to develop effective, robust, and rapid methods for NEOs detection. Specific recognition-based chemical sensing has been regarded as one of the most promising detection tools for NEOs due to their excellent selectivity, sensitivity, and robust interference resistance. In this review, we introduce the novel recognition strategies-enabled chemical sensing in food neonicotinoids detection in the past years (2017-2023). The properties and advantages of molecular imprinting recognition (MIR), host-guest recognition (HGR), electron-catalyzed recognition (ECR), immune recognition (IR), aptamer recognition (AR), and enzyme inhibition recognition (EIR) in the development of NEOs sensing platforms are discussed in detail. Recent applications of chemical sensing platforms in various food products, including fruits and vegetables, cereals, teas, honey, aquatic products, and others are highlighted. In addition, the future trends of applying chemical sensing with specific recognition strategies for NEOs analysis are discussed.

Nucleic Acid Aptamer-Based Biosensors: A Review

Aptamers, short strands of either DNA, RNA, or peptides, known for their exceptional specificity and high binding affinity to target molecules, are providing significant advancements in the field of health. When seamlessly integrated into biosensor platforms, aptamers give rise to aptasensors, unlocking a new dimension in point-of-care diagnostics with rapid response times and remarkable versatility. As such, this review aims to present an overview of the distinct advantages conferred by aptamers over traditional antibodies as the molecular recognition element in biosensors. Additionally, it delves into the realm of specific aptamers made for the detection of biomarkers associated with infectious diseases, cancer, cardiovascular diseases, and metabolomic and neurological disorders. The review further elucidates the varying binding assays and transducer techniques that support the development of aptasensors. Ultimately, this review discusses the current state of point-of-care diagnostics facilitated by aptasensors and underscores the immense potential of these technologies in advancing the landscape of healthcare delivery.

An inner filter effect-based fluorescent aptasensor for sensitive detection of kanamycin in complex samples using gold nanoparticles and graphene oxide quantum dots

In this work, a label-free fluorescent aptasensor based on the inner filter effect (IFE) between gold nanoparticles (AuNPs) and graphene oxide quantum dots (GOQDs) was developed for the detection of kanamycin in complex samples. AuNPs are capable of functioning as the fluorescence absorber of GOQDs because of the complementary overlap between their absorption spectra and the emission spectra of GOQDs. AuNPs can effectively quench the fluorescence of GOQDs via the IFE and modulate it with their aggregation state. In the presence of kanamycin, the aptamer is released from the surface of AuNPs, leading to their salt-induced aggregation and the fluorescence recovery of GOQDs. Under the optimum conditions, the fluorescence intensity of GOQDs was linearly proportional to the concentration of kanamycin over the range from 5 to 600 nM, with a detection limit of 3.6 nM. Moreover, the fluorescent aptasensor was successfully applied for kanamycin detection in complex samples (milk, honey and serum), which might hold great promise for kanamycin detection in food safety control and clinical research.

Fluorescence-based aptasensors for small molecular food contaminants: From energy transfer to optical polarization

Small molecular food contaminants, such as mycotoxins, pesticide residues and antibiotics, are highly probable to be passively introduced in food at all stages of its processing, including planting, harvest, production, transportation and storage. Owing to the high risks caused by the unknowing intake and accumulation in human, there is an urgent need to develop rapid, sensitive and efficient methods to monitor them. Fluorescence-based aptasensors provide a promising platform for this area owing to its simple operation, high sensitivity, wide application range and economical practicability. In this paper, the common sorts of small molecular contaminants in foods, namely mycotoxins, pesticides, antibiotics, etc, are briefly introduced. Then, we make a comprehensive review, from fluorescence resonance energy transfer (in turn-on, turn-off, and ratiometric mode, as well as energy upconversion) to fluorescence polarization, of the fluorescence-based aptasensors for the determination of these food contaminants reported in the last five years. The principle of signal generation, the advances of each sort of fluorescent aptasensors, as well as their applications are introduced in detail. Additionally, we also discussed the challenges and perspectives of the fluorescent aptasensors for small molecular food contaminants. This work will offer systematic overview and inspiration for amateurs, researchers and developers of fluorescence-based aptasensors for the detection of small molecules.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Developing a DNA logic gate nanosensing platform for the detection of acetamiprid

This paper reports a novel fluorescence and colorimetric dual-signal-output DNA aptamer based sensor for the detection of acetamiprid residue. Acetamiprid is a new systemic broad-spectrum insecticide with high insecticidal efficiency that is widely used worldwide, but there is a risk of adverse neurological reactions in humans and animals. The dual-mode output principle designed in this paper, consisting of a fluorescence signal and colorimetric signal, is based on the relevant reaction of the special domain of a G-quadruplex, bidding farewell to a classical single-signal output, with a target-recognition cycle used to complete signal amplification through a hybridization chain reaction. Upgraded detection sensitivity and the qualitative and semi-quantitative detection of acetamiprid are achieved based on the fluorescence signal output and visual discrimination observations during colorimetric experiments. This model was applied to the determination of acetamiprid residue in fruits and vegetables. The dual-detection platform further reduced systematic error, with a detection limit of 27.7 pM. When applied in a comparative detection study using three different pesticides, the system shows excellent discrimination specificity and it performs well in actual sample detection and has a fast response time. Designing DNA logic gates that operate in the presence of targets and molecular-switch-based detection platforms also involves the intersection of biology and computational modeling, providing new ideas for biological platforms.

A review of spectroscopic probes constructed from aptamer-binding gold/silver nanoparticles or their dimers in environmental pollutants' detection

The issue of environmental pollutant residues has gained wide public attention all along. Therefore, it is necessary to develop simple, rapid, economical, portable, and sensitive detection techniques, which have become the focus of research in the pollutants detection field. Spectroscopy is one of the most convenient, simple, rapid, and intuitive analytical tools that can provide accurate information, such as ultraviolet spectroscopy, fluorescence spectroscopy, Raman spectroscopy, plasmon resonance spectroscopy, etc. Gold nanoparticles, silver nanoparticles, and their dimers with unique optical properties are commonly used in the construction of spectroscopic probes. As a class of oligonucleotides that can recognize specific target molecules, aptamers also have a strong ability to recognize small-molecule pollutants. The application of aptamer-binding metal nanoparticles in biosensing detection presents significant advantages for instance high sensitivity, good selectivity, and rapid analysis. And many spectroscopic probes constructed by aptamer-binding gold nanoparticles, silver nanoparticles, or their dimers have been successfully demonstrated for detecting pollutants. This review summarizes the progress, advantages, and disadvantages of aptamer sensing techniques constructed by visual colorimetric, fluorescence, Raman, and plasmon resonance spectroscopic probes combining gold/silver nanoparticles or their dimers in the field of pollutants detection, and discusses the prospects and challenges for their future.

Advanced screening and tailoring strategies of pesticide aptamer for constructing biosensor

The rapid development of aptamers has helped address the challenges presented by the wide existed pesticides contaminations. Screening of aptamers with excellent performance is a prerequisite for successfully constructing biosensors, while further tailoring of aptamers with enhanced activity greatly improved the assay performance. Firstly, this paper reviewed the advanced screening strategies for pesticides aptamers, including immobilization screening that preserves the native structures of targets, non-immobilized screening based on nanomaterials, capillary electrophoresis-systematic evolution of ligands by exponential enrichment (CE-SELEX), virtual screening in silico, high-throughput selection, and rational secondary library generation methods, which contributed significantly to improve the success rate of screening, reduce the screening time, and ensure aptamer binding affinity. Secondly, the precise tailoring strategies for pesticides aptamers were modularly elaborated, containing deletion, splitting, elongation, and fusion, which provided various advantages like cost-efficiency, enhanced binding affinity, and new derived functional motifs. Thirdly, the developed aptamer-based biosensors (aptasensors) for pesticide detection were systematically reviewed according to the different signal output modes. Finally, the challenges and future perspectives of pesticide detection are discussed comprehensively.

Progress in Nanomaterials-Based Enzyme and Aptamer Biosensor for the Detection of Organophosphorus Pesticides

With the improvement of people's safety awareness, the requirement of pesticide detection is gradually increasing, and many new detection methods toward Organophosphorus pesticide (OPs) has been further developed and applied. Nanomaterials-based biosensors have played an important role in the trace detection of OPs. This article mainly introduces the detection principle of enzymes and aptamers as the identification element of biosensors. Various nanomaterials (i.e., metals and metal oxides, carbon nanotubes, graphene and graphene oxide, quantum dots, metal organic frameworks, molecular imprinted polymers, etc.) possess their unique properties and play different roles in the enzyme and aptamer-based biosensors toward OPs: (a) to produce the optical or electrochemical signal; (b) as a carrier to load the enzyme or aptamer; (c) to enhance the signal response. Besides, the intelligent portable devices provide the possibility to realize the onsite and real-time detection. The limitations of some nanomaterials and the future development are discussed. Finally, the future of enzyme and aptamer-based biosensors has prospected.

Rapid qualitative and quantitative detection of Salmonella typhimurium using a single-step dual photometric/fluorometric assay

A dual-signal photometric/fluorometric assay was established for rapid, qualitative, and quantitative detection of Salmonella typhimurium (S. typhimurium). This method was composed of two parts: (1) a single-step photometric (SSC) assay containing gold nanoparticles (AuNPs), poly-diallyldimethylammonium chloride (PDDA), and S. typhimurium-specific aptamer, and (2) a fluorescence (FL) assay containing carboxyl-modified CdSe/ZnS quantum dots (QDs-_COOH). Users just need to drop samples contaminated with S. typhimurium into SSC assay; the apparent color change from red to blue can be observed in a short time (20 min). A smartphone app was developed to read the semiquantitative result. By subsequently adding one drop of FL assay into the reaction mixture, the generated fluorescence intensity reflected the concentration of S. typhimurium. The naked eye limit of detection (LOD) and fluorescent LOD were 10³ cfu/mL and 10 cfu/mL, respectively. This method exhibited good selectivity. The reliability and practicability were verified by testing contaminated food, drinking water, and pets' urine.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Recent advances in synthesis and modification of carbon dots for optical sensing of pesticides

Serious threat from pesticide residues to the ecosystem and human health has become a global concern. Developing reliable methods for monitoring pesticides is a world-wide research hotspot. Carbon dots (CDs) with excellent photostability, low toxicity, and good biocompatibility have been regarded as the potential substitutes in fabricating various optical sensors for pesticide detection. Based on the relevant high-quality publications, this paper first summarizes the current state-of-the-art of the synthetic and modification approaches of CDs. Then, a comprehensive overview is given on the recent advances of CDs-based optical sensors for pesticides over the past five years, with a particular focus on photoluminescent, electrochemiluminescent and colorimetric sensors regarding the sensing mechanisms and design principles by integrating with various recognition elements including antibodies, aptamers, enzymes, molecularly imprinted polymers, and some nanoparticles. Novel functions and extended applications of CDs as signal indicators, catalyst, co-reactants, and electrode surface modifiers, in constructing optical sensors are specially highlighted. Beyond an assessment of the performances of the real-world application of these proposed optical sensors, the existing inadequacies and current challenges, as well as future perspectives for pesticide monitoring are discussed in detail. It is hoped to provide powerful insights for the development of novel CDs-based sensing strategies with their wide application in different fields for pesticide supervision.

Carbon dot composites for bioapplications: a review

Recent advancements in the synthesis of carbon dot composites and their applications in biomedical fields (bioimaging, drug delivery and biosensing) have been carefully summarized. The current challenges and future trends of CD composites in this field have also been discussed.

Nano optical and electrochemical sensors and biosensors for detection of narrow therapeutic index drugs

For the first time, a comprehensive review is presented on the quantitative determination of narrow therapeutic index drugs (NTIDs) by nano optical and electrochemical sensors and biosensors. NTIDs have a narrow index between their effective doses and those at which they produce adverse toxic effects. Therefore, accurate determination of these drugs is very important for clinicians to provide a clear judgment about drug therapy for patients. Routine analytical techniques have limitations such as being expensive, laborious, and time-consuming, and need a skilled user and therefore  the nano/(bio)sensing technology leads to high interest.

Amplified detection signal at a photoelectrochemical aptasensor with a poly(diphenylbutadiene)-BiOBr heterojunction and Au-modified CeO2 octahedrons

A major aspect of this work is the synergistic application of a poly(diphenylbutadiene)-BiOBr composite and a gold nanoparticle-linked CeO₂ octahedron to develop a photoelectrochemical aptasensor with an easily measurable detection signal change. Specifically, poly(diphenylbutadiene) nanofiber-immobilised BiOBr flower-like microspheres were developed as a hybrid material with a heterojunction that facilitates high visible light absorption and efficient photo-generated charge separation, which are essential features for sensitive photoelectrochemical sensors. The model analyte acetamiprid was attached via its specific aptamer on the aptasensor. Separately, a gold nanoparticle-linked CeO₂ octahedron was strategically used to significantly diminish the photocurrent by impeding electron transfer at the aptasensor surface. After acetamiprid binding, the CeO₂ octahedrons were displaced from the aptasensor. This caused a weakened quenching effect and restored the photocurrent to accomplish an "on-off-on" detection mechanism. This photoelectrochemical aptasensor exhibited a detection limit of 0.05 pM over a linear range of 0.1 pM-10 μM acetamiprid. The use of an aptamer has provided good specificity to acetamiprid and anti-interference. In addition, an ∼5.8% relative standard deviation was estimated as the reproducibility of the photoelectrochemical aptasensor. Furthermore, nearly 90% of the initial photocurrent was still measurable after storing these aptasensors at room temperature for 4 weeks, demonstrating their stability.

Sulphur-doped graphene quantum dot based fluorescent turn-on aptasensor for selective and ultrasensitive detection of omethoate

Development of selective, ultra-sensitive, rapid and facile methods for the detection of chemical residues of toxic pesticides and hazardous chemicals are quite important in food safety, environmental monitoring and safeguarding public health. Herein, we presented a fluorescent turn-on aptasensor based on sulphur-doped graphene quantum dot (S-GQD) utilizing specific recognition and binding property of aptamer for the ultra-sensitive and selective detection of omethoate (OM) which is a systemic organophosphorus pesticide. The detection method is based on tuning aggregation-disaggregation mechanism of S-GQD by way of conformational alteration of the recognition probe. Fluorescence 'turn-on' process includes aggregation-induced quenching of S-GQD with aptamer via S-GQD-aptamer complex formation and its subsequent fluorescence recovery with the addition of OM by structural switching of S-GQD-aptamer complex to aptamer-omethoate complex. The reported 'switch-on' aptasensor has exhibited a low limit of detection of 0.001 ppm with high selectivity for OM over other pesticides.

Selection and identification of a DNA aptamer for ultrasensitive and selective detection of λ-cyhalothrin residue in food

Pyrethroid pesticides residues will not only pollute the environment, but also cause high toxicity to the human body. It is significant to establish an efficient and accurate method for pyrethroid detection in food. Considering that the common biomolecules like antibody is complicated and easy to inactivate, it is urgent to find a new type of biomolecule to specifically recognize pyrethroid pesticides. This study proposed the Capture-SELEX strategy to firstly select λ-cyhalothrin aptamer by immobilizing random ssDNA library. High-throughput sequencing was performed on the enriched ssDNA library through multiple Capture-SELEX rounds. Comprehensively inspecting structural similarity and homology, six sequences were chosen from five families for further analysis. The results showed that the aptamer (named LCT-1) could specifically recognize λ-cyhalothrin with the strongest affinity (K_d = 50.64 ± 4.33 nmol L^-1). Molecular docking results revealed that the binding sites between λ-cyhalothrin and LCT-1 aptamer are mainly related to the bases A-5, C-6, C-28, A-29, C-30, G-31 and G-32. The LCT-1 aptamer was truncated to a shorter sequence (named as LCT-1-39) by removing other irrelevant bases, and its K_d value was determined as (10.27 ± 1.33) nmol·L^-1 by Microscale Thermophoresis (MST). Both LCT-1 and LCT-1-39 aptamers were employed as recognition molecules to establish the colorimetric aptasensors for λ-cyhalothrin detection, which displayed good repeatability and reproducibility. The detection limit of the aptasensors were individually calculated as 0.0197 μg ml^-1 and 0.0186 μg ml^-1, and their recovery rate of λ-cyhalothrin in pear and cucumber samples was in the range of 82.93-95.50%. This article provides a promising application for the detection of λ-cyhalothrin.

An ionic liquid-assisted quantum dot-grafted covalent organic framework-based multi-dimensional sensing array for discrimination of insecticides using principal component analysis and clustered heat map

A robust multi-dimensional sensing array based on VBimBF₄B/MAA-anchored quantum dot (QD)-grafted covalent organic frameworks (COFs) [(V-M)/QD-grafted COFs] was established via one-pot strategy. The multi-dimensional sensing array has the outstanding advantages of physicochemical and thermal stability, large specific surface area, and regular pore structures. The assistance of ionic liquid VBimBF₄B enhanced the transduction efficiency, and the synergistic effect of COFs enhanced detection efficiency. The improved multi-dimensional sensing array by COFs and ionic liquid VBimBF₄B served to identify seven insecticides by non-specific interactions via hydrogen bonding, and the differences in the kinetics of the binding to the insecticides resulted in variation of the three-output channel (fluorescence, phosphorescence, and light scattering) signals, thus generating a distinct optical fingerprint. The unique fingerprint patterns of seven kinds of common insecticides at 200 μg L^-1 were successfully discriminated using principal component analysis and clustered heat map analysis. The multi-dimensional sensing array showed a response to seven insecticides based on three spectral channels over the range of 0.001-0.4 μg mL^-1 with a limit of detection of 1.08-18.68 μg L^-1. The spiked recovery of tap water was 79.86-134.22%, with RSD ranging from 0.89-14.9%. This study broadens the applications of sensing arrays technology and provides a promising building block for insecticide determination.

A Highly Luminescent Nitrogen-Doped Nanographene as an Acid- and Metal-Sensitive Fluorophore for Optical Imaging

Dibenzo[hi,st]ovalene (DBOV) has excellent photophysical properties, including strong fluorescence and high ambient stability. Moreover, the optical blinking properties of DBOV have enabled optical super-resolution single-molecule localization microscopy with an imaging resolution beyond the diffraction limit. Various organic and inorganic fluorescent probes have been developed for super-resolution imaging, but those sensitive to pH and/or metal ions have remained elusive. Here, we report a diaza-derivative of DBOV (N-DBOV), synthesized in eight steps with a total yield of 15%. Nitrogen (N)-bearing zigzag edges were formed through oxidative cyclization of amino groups in the last step. UV–vis and fluorescence spectroscopy of N-DBOV revealed its promising optical properties comparable to those of the parent DBOV, while cyclic voltammetry and density functional theory calculations highlighted its lower orbital energy levels and potential n-type semiconductor character. Notably, in contrast to that of the parent DBOV, the strong luminescence of N-DBOV is dependent on pH and the presence of heavy metal ions, indicating the potential of N-DBOV in sensing applications. N-DBOV also exhibited pH-responsive blinking, which enables pH-sensitive super-resolution imaging. Therefore, N-DBOV appears to be a highly promising candidate for fluorescence sensing in biology and environmental analytics.

A flow injection fluorescence "turn-on" sensor for the determination of metformin hydrochloride based on the inner filter effect of nitrogen-doped carbon dots/gold nanoparticles double-probe

In this paper, an ultrasensitive and rapid "turn-on" fluorescence sensor, integrating flow-injection (FI) with nitrogen-doped carbon dots/gold nanoparticles (N-CDs/AuNPs) double-probe is established for the determination of metformin hydrochloride (MET) in biological fluids. The sensing strategy involves the weak inner filter effect between AuNPs and N-CDs due to aggregation products of MET with AuNPs. Unfortunately, the degree of AuNPs aggregation is difficult to control through manual assays, resulting in intolerable measurement error that limits further applications. However, the proposed method overcomes the above problem, and significantly lowers the consumption of expensive reagents (AuNPs: about 60 μL per test). Under optimal conditions, the fluorescence intensity at 400 nm excitation and 505 nm emission wavelengths display a linear correlation with MET concentration (5-100 μg L^-1) and the limit of detection is 2.32 μg L^-1 (3.3 S/k). The advantages of the presented method include high sensitivity, rapid speed (60 sample h^-1), good accuracy and precision (RSD ≤ 2.1%, n = 11) and low cost. Since MET is the first-line hypoglycemic agent in patients with type II diabetes, this method can preliminarily determine MET content in urine samples, giving satisfactory results.

A low-background fluorescent aptasensor for acetamiprid detection based on DNA three-way junction-formed G-quadruplexes and graphene oxide

A simple fluorescence detection platform has been established for acetamiprid assay based on DNA three-way junctions (TWJs), which can triple the fluorescence signal without any other amplification. It is designed with three single-stranded DNAs (ssDNA), each of which contains one-third or two-thirds of the G-quadruplex sequence at each end. Upon the addition of acetamiprid, the conformation of the aptamer-containing double-stranded DNA (dsDNA) changes from its original conformation and releases a strand of ssDNA. This ssDNA, with the other two ssDNAs, can assemble into DNA TWJs, and the three pairs of the branched ends of the DNA TWJs are adjacent to each other, allowing them to form three units of G-quadruplexes. Hence, the fluorescence of N-methyl mesoporphyrin IX (NMM) is lighted by the nascent G-quadruplexes. Graphene oxide (GO) is then added to minimize the detection background by absorbing the free NMM and non-target-induced ssDNA. The proposed strategy can assay acetamiprid in a wide linear range of 0-500 nM with a detection limit of 5.73 nM. More importantly, this assay platform demonstrates high potential for acetamiprid assay in food control and environmental monitoring.

Recent advances in the construction and analytical applications of carbon dots-based optical nanoassembly

Recently, more and more attention has been focused on the construction and analytical applications of optical nanoassembly through combining carbon dots (CDs) with various other functional nanomaterials. The rational design and manufacture of CDs-based optical nanoassembly will be critical to meeting the needs of analytical science. The last decade has witnessed the immense potential of CDs-based optical nanoassembly in multiple sensing applications owing to their controlled optical properties, adjustable surface chemistry and microscopic morphology. This feature article collects the recent advances in the research and development of CDs-based optical nanoassembly and their applications in analytical sensors, aiming to provide vital insights and suggestions to inspire their broad sensing applications.

Metal Nanostructures for Environmental Pollutant Detection Based on Fluorescence

Heavy metal ions and pesticides are extremely dangerous for human health and environment and an accurate detection is an essential step to monitor their levels in water. The standard and most used methods for detecting these pollutants are sophisticated and expensive analytical techniques. However, recent technological advancements have allowed the development of alternative techniques based on optical properties of noble metal nanomaterials, which provide many advantages such as ultrasensitive detection, fast turnover, simple protocols, in situ sampling, on-site capability and reduced cost. This paper provides a review of the most common photo-physical effects impact on the fluorescence of metal nanomaterials and how these processes can be exploited for the detection of pollutant species. The final aim is to provide readers with an updated guide on fluorescent metallic nano-systems used as optical sensors of heavy metal ions and pesticides in water.

Photonic Carbon Dots as an Emerging Nanoagent for Biomedical and Healthcare Applications

As a class of carbon-based nanomaterials, carbon dots (CDs) have attracted enormous attention because of their tunable optical and physicochemical properties, such as absorptivity and photoluminescence from ultraviolet to near-infrared, high photostability, biocompatibility, and aqueous dispersity. These characteristics make CDs a promising alternative photonic nanoagent to conventional fluorophores in disease diagnosis, treatment, and healthcare managements. This review describes the fundamental photophysical properties of CDs and highlights their recent applications to bioimaging, photomedicine (e.g., photodynamic/photothermal therapies), biosensors, and healthcare devices. We discuss current challenges and future prospects of photonic CDs to give an insight into developing vibrant fields of CD-based biomedicine and healthcare.

Fluorescent Carbon Quantum Dots-Synthesis,Functionalization and Sensing Application in FoodAnalysis

Carbon quantum dots (CQDs) with stable physicochemical properties are one of theemerging carbon nanomaterials that have been studied in recent years. In addition to the excellentoptical properties such as photoluminescence, photobleaching resistance and light stability, thismaterial also has favorable advantages of good biocompatibility and easy functionalization, whichmake it an ideal raw material for constructing sensing equipment. In addition, CQDs can combinedwith other kinds of materials to form the nanostructured composites with unique properties, whichprovides new insights and ideas for the research of many fields. In the field of food analysis,emerging CQDs have been deeply studied in food composition analysis, detection and monitoringtrace harmful substances and made remarkable research progress. This article introduces andcompares the various methods for CQDs preparation and reviews its related sensing applicationsas a new material in food components analysis and food safety inspection in recent years. It isexpected to provide a significant guidance for the further study of CQDs in the field of foodanalysis and detection. CQDs; synthesis; fluorescent sensing; food analysis.

A label-free and carbon dots based fluorescent aptasensor for the detection of kanamycin in milk

A novel label-free aptasensor for kanamycin detection was constructed using gold nanoparticles (AuNPs) as absorber to quench the fluorescence of carbon dots (CDs) via the inner filter effect (IFE). The strategy was mainly relied on the fact that the absorption spectra of AuNPs overlapped with the fluorescence excitation spectra of fluorophores as well as the specific binding capacity of Ky2 aptamer to kanamycin. Upon adding kanamycin antibiotic, the free aptamer sequences are firstly exhausted to form some complexes, which leads to AuNPs aggregation in high salt concentration. Consequently, the absorber's absorption spectrum changes and no longer overlaps with the fluorescence emission spectrum of the CDs, which results in obvious fluorescence recovery of the aptasensor. Herein, the effects of some vital parameters like the type and number of nanoparticles on the fluorescent aptasensor have been investigated. Under optimal conditions, the proposed aptasensor can detect kanamycin in a linear range of 0.04-0.24 μM, with a limit of detection (LOD) as low as 18 nM. Moreover, the further studies also validate the applicability of the proposed aptasensor in milk samples, revealing that it may have enormous potential utility for practical kanamycin detection in food products in the future.

Fluorescent aptasensor for carbendazim detection in aqueous samples based on gold nanoparticles quenching Rhodamine B

This paper proposes a fluorescent aptasensor for the detection of carbendazim (CBZ) in aqueous solution using CBZ-specific aptamer as sensing probe, gold nanoparticles (AuNPs) and Rhodamine B (RhoB) as indicator, respectively. In the absence of CBZ, CBZ aptamer could wrap AuNPs and maintained it dispersed in NaCl solution basically. Contrarily, the aptamer could specifically combine with CBZ and form a stable aptamer-CBZ complex, leaving AuNPs exposed to be aggregated by NaCl solution. The dispersed AuNPs could efficiently quench the fluorescence of RhoB, but those aggregated AuNPs have poor capability to impair the fluorescent indicator. Thus, the concentration of CBZ could be detected quantitatively through the distinction of the fluorescence intensity. This convenient fluorescent assay for CBZ had a wide linear range from 2.33 to 800 nM and a 2.33 nM limit of detection (LOD). Furthermore, it had high selectivity over pesticides, antibiotics, metal ions and other disrupting chemicals. As for application, the method could determine CBZ in water samples with recoveries in the range of 96.3-111.2%. This fluorescent aptasensor possessed great potential application for CBZ detection in actual aquatic environment.