Cell-homing and immunomodulatory composite hydrogels for effective wound healing with neovascularization

Wound healing in cases of excessive inflammation poses a significant challenge due to compromised neovascularization. Here, we propose a multi-functional composite hydrogel engineered to overcome such conditions through recruitment and activation of macrophages with adapted degradation of the hydrogel. The composite hydrogel (G-TSrP) is created by combining gelatin methacryloyl (GelMA) and nanoparticles (TSrP) composed of tannic acid (TA) and Sr2+. These nanoparticles are prepared using a one-step mineralization process assisted by metal-phenolic network formation. G-TSrP exhibits the ability to eliminate reactive oxygen species and direct polarization of macrophages toward M2 phenotype. It has been observed that the liberation of TA and Sr2+ from G-TSrP actively facilitate the recruitment and up-regulation of the expression of extracellular matrix remodeling genes of macrophages, and thereby, coordinate in vivo adapted degradation of the G-TSrP. Most significantly, G-TSrP accelerates angiogenesis despite the TA's inhibitory properties, which are counteracted by the released Sr2+. Moreover, G-TSrP enhances wound closure under inflammation and promotes normal tissue formation with strong vessel growth. Genetic analysis confirms macrophage-mediated wound healing by the composite hydrogel. Collectively, these findings pave the way for the development of biomaterials that promote wound healing by creating regenerative environment.

A Multifunctional Metal-Phenolic Nanocoating on Bone Implants for Enhanced Osseointegration via Early Immunomodulation

Surface modification is an important approach to improve osseointegration of the endosseous implants, however it is still desirable to develop a facile yet efficient coating strategy. Herein, a metal-phenolic network (MPN) is proposed as a multifunctional nanocoating on titanium (Ti) implants for enhanced osseointegration through early immunomodulation. With tannic acid (TA) and Sr2+ self-assembled on Ti substrates, the MPN coatings provided a bioactive interface, which can facilitate the initial adhesion and recruitment of bone marrow mesenchymal stem cells (BMSCs) and polarize macrophage toward M2 phenotype. Furthermore, the TA-Sr coatings accelerated the osteogenic differentiation of BMSCs. In vivo evaluations further confirmed the enhanced osseointegration of TA-Sr modified implants via generating a favorable osteoimmune microenvironment. In general, these results suggest that TA-Sr MPN nanocoating is a promising strategy for achieving better and faster osseointegration of bone implants, which can be easily utilized in future clinical applications.

Strontium/Silicon/Calcium-Releasing Hierarchically Structured 3D-Printed Scaffolds Accelerate Osteochondral Defect Repair

Articular cartilage defects are a global challenge, causing substantial disability. Repairing large defects is problematic, often exceeding cartilage's self-healing capacity and damaging bone structures. To tackle this problem, a scaffold-mediated therapeutic ion delivery system is developed. These scaffolds are constructed from poly(ε-caprolactone) and strontium (Sr)-doped bioactive nanoglasses (SrBGn), creating a unique hierarchical structure featuring macropores from 3D printing, micropores, and nanotopologies due to SrBGn integration. The SrBGn-embedded scaffolds (SrBGn-µCh) release Sr, silicon (Si), and calcium (Ca) ions, which improve chondrocyte activation, adhesion, proliferation, and maturation-related gene expression. This multiple ion delivery significantly affects metabolic activity and maturation of chondrocytes. Importantly, Sr ions may play a role in chondrocyte regulation through the Notch signaling pathway. Notably, the scaffold's structure and topological cues expedite the recruitment, adhesion, spreading, and proliferation of chondrocytes and bone marrow-derived mesenchymal stem cells. Si and Ca ions accelerate osteogenic differentiation and blood vessel formation, while Sr ions enhance the polarization of M2 macrophages. The findings show that SrBGn-µCh scaffolds accelerate osteochondral defect repair by delivering multiple ions and providing structural/topological cues, ultimately supporting host cell functions and defect healing. This scaffold holds great promise for osteochondral repair applications.

Reduced Graphene Oxide Fibers Combined with Electrical Stimulation Promote Peripheral Nerve Regeneration

Background

The treatment of long-gap peripheral nerve injury (PNI) is still a substantial clinical problem. Graphene-based scaffolds possess extracellular matrix (ECM) characteristic and can conduct electrical signals, therefore have been investigated for repairing PNI. Combined with electrical stimulation (ES), a well performance should be expected. We aimed to determine the effects of reduced graphene oxide fibers (rGOFs) combined with ES on PNI repair in vivo.

Methods

rGOFs were prepared by one-step dimensionally confined hydrothermal strategy (DCH). Surface characteristics, chemical compositions, electrical and mechanical properties of the samples were characterized. The biocompatibility of the rGOFs were systematically explored both in vitro and in vivo. Total of 54 Sprague-Dawley (SD) rats were randomized into 6 experimental groups: a silicone conduit (S), S+ES, S+rGOFs-filled conduit (SGC), SGC+ES, nerve autograft, and sham groups for a 10-mm sciatic defect. Functional and histological recovery of the regenerated sciatic nerve at 12 weeks after surgery in each group of SD rats were evaluated.

Results

rGOFs exhibited aligned micro- and nano-channels with excellent mechanical and electrical properties. They are biocompatible in vitro and in vivo. All 6 groups exhibited PNI repair outcomes in view of neurological and morphological recovery. The SGC+ES group achieved similar therapeutic effects as nerve autograft group (P > 0.05), significantly outperformed other treatment groups. Immunohistochemical analysis showed that the expression of proteins related to axonal regeneration and angiogenesis were relatively higher in the SGC+ES.

Conclusion

The rGOFs had good biocompatibility combined with excellent electrical and mechanical properties. Combined with ES, the rGOFs provided superior motor nerve recovery for a 10-mm nerve gap in a murine acute transection injury model, indicating its excellent repairing ability. That the similar therapeutic effects as autologous nerve transplantation make us believe this method is a promising way to treat peripheral nerve defects, which is expected to guide clinical practice in the future.

Janus Membrane with Intrafibrillarly Strontium-Apatite-Mineralized Collagen for Guided Bone Regeneration

Commercial collagen membranes face difficulty in guided bone regeneration (GBR) due to the absence of hierarchical structural design, effective interface management, and diverse bioactivity. Herein, a Janus membrane called SrJM is developed that consists of a porous collagen face to enhance osteogenic function and a dense face to maintain barrier function. Specifically, biomimetic intrafibrillar mineralization of collagen with strontium apatite is realized by liquid precursors of amorphous strontium phosphate. Polycaprolactone methacryloyl is further integrated on one side of the collagen as a dense face, which endows SrJM with mechanical support and a prolonged lifespan. In vitro experiments demonstrate that the dense face of SrJM acts as a strong barrier against fibroblasts, while the porous face significantly promotes cell adhesion and osteogenic differentiation through activation of calcium-sensitive receptor/integrin/Wnt signaling pathways. Meanwhile, SrJM effectively enhances osteogenesis and angiogenesis by recruiting stem cells and modulating osteoimmune response, thus creating an ideal microenvironment for bone regeneration. In vivo studies verify that the bone defect region guided by SrJM is completely repaired by newly formed vascularized bone. Overall, the outstanding performance of SrJM supports its ongoing development as a multifunctional GBR membrane, and this study provides a versatile strategy of fabricating collagen-based biomaterials for hard tissue regeneration.

Efficacy and bone-contact biocompatibility of glass ionomer cement as a biomaterial for bone regeneration: A systematic review

Bone regeneration is a rapidly growing field that seeks to develop new biomaterials to regenerate bone defects. Conventional bone graft materials have limitations, such as limited availability, complication, and rejection. Glass ionomer cement (GIC) is a biomaterial with the potential for bone regeneration due to its bone-contact biocompatibility, ease of use, and cost-effectiveness. GIC is a two-component material that adheres to the bone and releases ions that promote bone growth and mineralization. A systematic literature search was conducted using PubMed-MEDLINE, Scopus, and Web of Science databases and registered in the PROSPERO database to determine the evidence regarding the efficacy and bone-contact biocompatibility of GIC as bone cement. Out of 3715 initial results, thirteen studies were included in the qualitative synthesis. Two tools were employed in evaluating the Risk of Bias (RoB): the QUIN tool for assessing in vitro studies and SYRCLE for in vivo. The results indicate that GIC has demonstrated the ability to adhere to bone and promote bone growth. Establishing a chemical bond occurs at the interface between the GIC and the mineral phase of bone. This interaction allows the GIC to exhibit osteoconductive properties and promote the growth of bone tissue. GIC's bone-contact biocompatibility, ease of preparation, and cost-effectiveness make it a promising alternative to conventional bone grafts. However, further research is required to fully evaluate the potential application of GIC in bone regeneration. The findings hold implications for advancing material development in identifying the optimal composition and fabrication of GIC as a bone repair material.

Photothermal Treatment of Polydopamine Nanoparticles@Hyaluronic Acid Methacryloyl Hydrogel Against Peripheral Nerve Adhesion in a Rat Model of Sciatic Nerve

Purpose

Peripheral nerve adhesion occurs following injury and surgery. Functional impairment leading by peripheral nerve adhesion remains challenging for surgeons. Local tissue overexpression of heat shock protein (HSP) 72 can reduce the occurrence of adhesion. This study aims to develop a photothermal material polydopamine nanoparticles@Hyaluronic acid methacryloyl hydrogel (PDA NPs@HAMA) and evaluate their efficacy for preventing peripheral nerve adhesion in a rat sciatic nerve adhesion model.

Materials and Methods

PDA NPs@HAMA was prepared and characterized. The safety of PDA NPs@HAMA was evaluated. Seventy-two rats were randomly assigned to one of the following four groups: the control group; the hyaluronic acid (HA) group; the polydopamine nanoparticles (PDA) group and the PDA NPs@HAMA group (n = 18 per group). Six weeks after surgery, the scar formation was evaluated by adhesion scores and biomechanical and histological examinations. Nerve function was assessed with electrophysiological examination, sensorimotor analysis and gastrocnemius muscle weight measurements.

Results

There were significant differences in the score on nerve adhesion between the groups (p < 0.001). Multiple comparisons indicated that the score was significantly lower in the PDA NPs@HAMA group (95% CI: 0.83, 1.42) compared with the control group (95% CI: 1.86, 2.64; p = 0.001). Motor nerve conduction velocity and muscle compound potential of the PDA NPs@HAMA group were higher than the control group's. According to immunohistochemical analysis, the PDA NPs@HAMA group expressed more HSP72, less α-smooth muscle actin (α-SMA), and had fewer inflammatory reactions than the control group.

Conclusion

In this study, a new type of photo-cured material with a photothermic effect was designed and synthesized-PDA NPs@HAMA. The photothermic effect of PDA NPs@HAMA protected the nerve from adhesion to preserve the nerve function in the rat sciatic nerve adhesion model. This effectively prevented adhesion-related damage.

Recent Advance of Strontium Functionalized in Biomaterials for Bone Regeneration

Bone defect disease causes damage to people’s lives and property, and how to effectively promote bone regeneration is still a big clinical challenge. Most of the current repair methods focus on filling the defects, which has a poor effect on bone regeneration. Therefore, how to effectively promote bone regeneration while repairing the defects at the same time has become a challenge for clinicians and researchers. Strontium (Sr) is a trace element required by the human body, which mainly exists in human bones. Due to its unique dual properties of promoting the proliferation and differentiation of osteoblasts and inhibiting osteoclast activity, it has attracted extensive research on bone defect repair in recent years. With the deep development of research, the mechanisms of Sr in the process of bone regeneration in the human body have been clarified, and the effects of Sr on osteoblasts, osteoclasts, mesenchymal stem cells (MSCs), and the inflammatory microenvironment in the process of bone regeneration have been widely recognized. Based on the development of technology such as bioengineering, it is possible that Sr can be better loaded onto biomaterials. Even though the clinical application of Sr is currently limited and relevant clinical research still needs to be developed, Sr-composited bone tissue engineering biomaterials have achieved satisfactory results in vitro and in vivo studies. The Sr compound together with biomaterials to promote bone regeneration will be a development direction in the future. This review will present a brief overview of the relevant mechanisms of Sr in the process of bone regeneration and the related latest studies of Sr combined with biomaterials. The aim of this paper is to highlight the potential prospects of Sr functionalized in biomaterials.

A static magnetic field enhances the repair of osteoarthritic cartilage by promoting the migration of stem cells and chondrogenesis

Objective

To investigate the therapeutic effects of static magnetic field (SMF) and its regulatory mechanism in the repair of osteoarthritic cartilage.

Methods

Fourteen-week-old female C57BL/6 mice were randomly divided into the sham operation group and the osteoarthritis (OA) groups with and without SMF application. SMF was applied at 200 ​mT for two consecutive weeks. Changes in knee cartilage were examined by histomorphometry, and the chondrogenesis and migration of endogenous stem cells were assessed. The expression of SRY-related protein 9 (SOX9), Collagen type II (COL2), matrix metallopeptidase 13 (MMP13), stromal cell-derived factor 1/C-X-C chemokine receptor type 4 (SDF-1/CXCR4), Piezo1 and other genes was evaluated, and the mechanism of SMF's action was tested using the CXCR4 inhibitor, AMD3100, and Piezo1 siRNA.

Results

SMF significantly decreased the OARSI scores after induction of OA. SMF was beneficial to chondrogenesis by elevating SOX9. In the OA mouse model, an increase in MMP13 with a decrease in COL2 led to the destruction of the cartilage extracellular matrix, which was suppressed by SMF. SMF promoted the migration of cartilage-derived stem/progenitor cells and bone marrow-derived mesenchymal stem cells (MSCs). It increased SDF-1 and CXCR4, while the CXCR4 inhibitor significantly suppressed the beneficial effects of SMF. The application of Piezo1 siRNA inhibited the SMF-induced increase of CXCR4.

Conclusion

SMF enhanced chondrogenesis and improved cartilage extracellular matrices. It activated the Piezo1-mediated SDF-1/CXCR4 regulatory axis and promoted the migration of endogenous stem cells. Collectively, it attenuated the pathological progression of cartilage destruction in OA mice.

The Translational potential of this article

The findings in this study provided convincing evidence that SMF could enhance cartilage repair and improve OA symptoms, suggesting that SMF could have clinical value in the treatment of OA.

Remodeling of the osteoimmune microenvironment after biomaterials implantation in murine tibia: Single-cell transcriptome analysis

Osseointegration seems to be a foreign body reaction equilibrium due to the complicated interactions between the immune and skeletal systems. The heterogeneity of the osteoimmune microenvironment in the osseointegration of implant materials remains elusive. Here, a single-cell study involving 40043 cells is conducted, and a total of 10 distinct cell clusters are identified from five different groups. A preliminary description of the osteoimmune microenvironment revealed the diverse cellular heterogeneity and dynamic changes modulated by implant properties. The increased immature neutrophils, Ly6C ⁺ CCR2^hi monocytes, and S100a8^hi macrophages induce an aggressive inflammatory response and eventually lead to the formation of fibrous capsule around the stainless steel implant. The enrichment of mature neutrophils, FcgR1^hi and differentiated immunomodulatory macrophages around the titanium implant indicates favorable osseointegration under moderate immune response. Neutrophil-depletion mice are conducted to explore the role of neutrophils in osseointegration. Neutrophils may improve bone formation by enhancing the recruitment of BMSCs via the CXCL12/CXCR3 signal axis. These findings contribute to a better knowledge of osteoimmunology and are valuable for the design and modification of 'osteoimmune-smart' biomaterials in the bone regeneration field.

Antifouling poly(PEGMA) grafting modified titanium surface reduces osseointegration through resisting adhesion of bone marrow mesenchymal stem cells

As an alternative strategy to achieve the desired bone augmentation, tenting screw technology (TST) has considerably broadened the indications for implant treatment. Titanium tenting screws are typically used in TST to maintain the space for bone regeneration. However, a high degree of osteogenic integration complicate titanium tenting screw removal and impact the bone healing micro-environment. Previous efforts have been focused on modifying titanium surfaces to enhance osseointegration while ignoring the opposite process. Due to the vital role of bone marrow mesenchymal stem cells (BMSCs) in bone regeneration, it might be feasible to reduce osseointegration around titanium tenting screws by resisting the adhesion of BMSCs. Herein, poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was incorporated with a Ti surface in terms of surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The cell apoptosis analysis showed that the new surface would not induce the apoptosis of BMSCs. Then, the adhesive and proliferative behaviors of BMSCs on the surface were analyzed which indicated that the poly(PEGMA) surface could inhibit the proliferation of BMSCs through resisting the adhesion process. Furthermore, in vivo experiments revealed the presence of the poly(PEGMA) on the surface resulted in a lower bone formation and osseointegration compared with the Ti group. Collectively, this dense poly(PEGMA) surface of Ti may serve as a promising material for clinical applications in the future. STATEMENT OF SIGNIFICANCE: The significance of this research includes: The poly(ethylene glycol)methyl ether methacrylate (poly(PEGMA)) with an optimal length of PEG chain was grafted onto a Ti surface by surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). The PEGMA surface could reduce the osteogenic integration by preventing the adhesion of cells, resulting in a lower pullout force of the modified implant and thereby desirable and feasible applications in dental surgery.

The Roles of Exosomes upon Metallic Ions Stimulation in Bone Regeneration

Metallic ions have been widely investigated and incorporated into bone substitutes for bone regeneration owing to their superior capacity to induce angiogenesis and osteogenesis. Exosomes are key paracrine mediators that play a crucial role in cell-to-cell communication. However, the role of exosomes in metallic ion-induced bone formation and their underlying mechanisms remain unclear. Thus, this review systematically analyzes the effects of metallic ions and metallic ion-incorporated biomaterials on exosome secretion from mesenchymal stem cells (MSCs) and macrophages, as well as the effects of secreted exosomes on inflammation, angiogenesis, and osteogenesis. In addition, possible signaling pathways involved in metallic ion-mediated exosomes, followed by bone regeneration, are discussed. Despite limited investigation, metallic ions have been confirmed to regulate exosome production and function, affecting immune response, angiogenesis, and osteogenesis. Although the underlying mechanism is not yet clear, these insights enrich our understanding of the mechanisms of the metallic ion-induced microenvironment for bone regeneration, benefiting the design of metallic ion-incorporated implants.

Polydopamine and hyaluronic acid immobilisation on vancomycin-loaded titanium nanotube for prophylaxis of implant infections

Titanium nanotube (Ti-NT) is an attractive substrate for local drug delivery, however, it is difficult to control the burst drug release and achieve sustained release from these nanotubes. In the present study, we investigated the feasibility of controlling drug release from Ti-NT within polydopamine and hyaluronic acid films, to achieve antibacterial activity and osteogenic promotion. Vancomycin was loaded into the Ti-NT by lyophilisation. Dopamine and hyaluronic acid were immobilized on the vancomycin-loaded Ti-NT surface through alternate deposition technique. The anti-infective and osteogenic abilities of the polydopamine and hyaluronic acid-modified Ti-NT were then investigated. Our results demonstrated that polydopamine and hyaluronic acid-modified Ti-NT exhibited improved drug loading and release control for 7 days. Compared with the vancomycin-loaded Ti-NT, the polydopamine and hyaluronic acid-modified Ti-NT exhibited better antibacterial ability, and the hyaluronic acid-modified Ti-NT promoted the osteogenic differentiation of rat bone marrow stem cells. Our results demonstrated that Ti-NT biofunctionalized with polydopamine and hyaluronic acid can help overcome the limitations of Ti-NT, by improving drug loading, antibacterial activity and osteogenic ability.

Osteogenesis Performance of Boronized Ti6Al4V/HA Composites Prepared by Microwave Sintering: In Vitro and In Vivo Studies

The boronized Ti6Al4V/HA composite is deemed to be an important biomaterial because of its potential remarkable mechanical and biological properties. This paper reports the osteogenesis performance of the boronized Ti6Al4V/HA composite, which was prepared by microwave sintering of powders of Ti6Al4V, hydroxyapatite (HA), and TiB₂ in high-purity Ar gas at 1050 °C for 30 min, as dental implant based on both cell experiments in vitro and animal experiments in vivo. The comparison between the boronized Ti6Al4V/HA composite and Ti, Ti6Al4V, and boronized Ti6Al4V in the terms of adhesion, proliferation, alkaline phosphate (ALP) activity, and mineralization of MG-63 cells on their surfaces confirmed that the composite exhibited the best inductive osteogenesis potential. It exerted a more significant effect on promoting the early osteogenic differentiation of osteoblasts and exhibited the maximum optical density (OD) value in the MTT assay and the highest levels of ALP activity and mineralization ability, primarily ascribed to its bioactive HA component, porous structure, and relatively rough micro-morphology. The in vivo study in rabbits based on the micro-computed tomography (micro-CT) analysis, histological and histomorphometric evaluation, and biomechanical testing further confirmed that the boronized Ti6Al4V/HA composite had the highest new bone formation potential and the best osseointegration property after implantation for up to 12 weeks, mainly revealed by the measured values of bone volume fraction, bone implant contact, and maximum push-out force which, for example, reached 48.64%, 61%, and 150.3 ± 6.07 N at the 12th week. Owing to these inspiring features, it can serve as a highly promising dental implant.

Enhanced healing process of tooth sockets using strontium-doped TiO2

Prevention of residual ridge resorption is important for tooth socket healing in clinical treatment. As a well known biomaterial, titanium dioxide (TiO₂) has been reported to show desirable bone regeneration capability. On the other hand, strontium plays a role in maintaining normal function in organisms and balancing bone remodeling. Hence, we synthesized strontium-doped titanium dioxide mesoporous nanospheres functionalized with amino-group using diphenyl diisocyanate. After incorporation with segmented polyurethane, the obtained injectable SPU/Sr-TiO₂/MDI nanocomposite adhesive showed satisfactory antibacterial activity and cell nontoxicity. This nanocomposite was used for tooth socket healing, and greatly promoted the formation of new bone tissue in the tooth extraction socket.

Improved osseointegration of strontium-modified titanium implant by regulating angiogenesis and macrophage polarization

Strotium (Sr) has shown strong osteogenic potential and thereby been widely incorporated into dental and orthopedic implants. However, the improved osseointegration of strontium-modified titanium implant through regulation of angiogenesis and macrophage...

iTRAQ-based proteomic analysis reveals potential osteogenesis-promoted role of ATM in strontium-incorporated titanium implant

The present study aims to reveal the osteogenic roles played by DNA damage response biomarkers through implementing isobaric tags for relative and absolute quantitation (iTRAQ) technique. First, sandblasted large-grit double acid-etched (SLA) titanium implant and strontium-incorporated (SLA-Sr) titanium implant were used for inserting in the tibiae of rats. iTRAQ technique was used to detect protein expression changes and identify differentially expressed proteins (DEPs). In total, 19,343 peptides and 4280 proteins were screened out. Among them, 91 and 138 DEPs were identified in the SLA-Sr group after implantation for 3 and 7 days, respectively. Ataxia-telangiectasia mutated (ATM) protein up-regulated on the 3rd day showed a trend of further up-regulation on the 7th day. Moreover, functional enrichment analyses were also conducted to explore the biological function of DEPs during the initial stage of osseointegration in vivo, which revealed that the biological functions of the DEPs on the 7th day were mainly related to "mismatch repair" and "mitotic G1 DNA damage checkpoint." Analysis of the Reactome signaling pathway showed that ATM was associated with TP53's regulation and activation. Finally, DNA damage repair related genes were selected for validation at mRNA and protein expression levels. Real-time reverse transcription-polymerase chain reaction and immunohistochemistry validation results demonstrated that mRNA expression level of ATM was higher in SLA-Sr group. In conclusion, SLA-Sr titanium implant could initiate DNA damage repair by activating expression levels of ATM. This study was striving to reveal new faces of better osseointegration and shedding light on the biological function and underlying mechanisms of this important procedure.

An Amorphous Peri-Implant Ligament with Combined Osteointegration and Energy-Dissipation

Progress toward developing metal implants as permanent hard-tissue substitutes requires both osteointegration to achieve load-bearing support, and energy-dissipation to prevent overload-induced bone resorption. However, in existing implants these two properties can only be achieved separately. Optimized by natural evolution, tooth-periodontal-ligaments with fiber-bundle structures can efficiently orchestrate load-bearing and energy dissipation, which make tooth-bone complexes survive extremely high occlusion loads (>300 N) for prolonged lifetimes. Here, a bioinspired peri-implant ligament with simultaneously enhanced osteointegration and energy-dissipation is presented, which is based on the periodontium-mimetic architecture of a polymer-infiltrated, amorphous, titania nanotube array. The artificial ligament not only provides exceptional osteoinductivity owing to its nanotopography and beneficial ingredients, but also produces periodontium-similar energy dissipation due to the complexity of the force transmission modes and interface sliding. The ligament increases bone-implant contact by more than 18% and simultaneously reduces the effective stress transfer from implant to peri-implant bone by ≈30% as compared to titanium implants, which as far as is known has not previously been achieved. It is anticipated that the concept of an artificial ligament will open new possibilities for developing high-performance implanted materials with increased lifespans.

Strontium-Loaded Nanotubes of Ti-24Nb-4Zr-8Sn Alloys for Biomedical Implantation

Ti-24Nb-4Zr-8Sn (Ti2448) alloys, with a relatively low elastic modulus and unique mechanical properties, are desirable materials for oral implantation. In the current study, a multifaceted strontium-incorporating nanotube coating was fabricated on a Ti2448 alloy (Ti2-NTSr) through anodization and hydrothermal procedures. In vitro, the Ti2-NTSr specimens demonstrated better osteogenic properties and more favorable osteoimmunomodulatory abilities. Moreover, macrophages on Ti2-NTSr specimens could improve the recruitment and osteogenic differentiation of osteoblasts. In vivo, dense clots with highly branched, thin fibrins and small pores existed on the Ti2-NTSr implant in the early stage after surgery. Analysis of the deposition of Ca and P elements, hard tissue slices and the bone-implant contact rate (BIC%) of the Ti2-NTSr implants also showed superior osseointegration. Taken together, these results demonstrate that the Ti2-NTSr coating may maximize the clinical outcomes of Ti2448 alloys for implantation applications.

Strontium-incorporated titanium implant surfaces treated by hydrothermal treatment enhance rapid osseointegration in diabetes: A preclinical vivo experimental study

OBJECTIVES

The aim of the current study was to explore effects of strontium-incorporated titanium implant surfaces by hydrothermal treatment on osseointegration in diabetic rats.

MATERIALS AND METHODS

The surface characteristics of SLA and SLA-Sr surfaces were detected by related instruments. Thirty-six male Sprague-Dawley rats were induced into diabetes, and thirty-six rats were normal. SLA and SLA-Sr implants were, respectively, inserted into bilateral tibial metaphysis of each rat. Percentage of bone-to-implant contact (BIC%) and percentage of bone area (BA%) were analyzed at 4 and 8 weeks after implantation. Immunohistochemistry of osteoprotegerin (OPG) and Wnt5a were conducted at 1 and 4 weeks. Gene expression levels of inflammatory cytokines and related signaling molecules in peri-implant bone tissue were detected at 3 and 7 days.

RESULTS

Strontium was uniformly distributed on SLA-Sr surfaces, and it was released in an effective concentration range. SLA-Sr surfaces showed significantly higher BIC% in diabetic rats at 4 (p < .05) and 8 weeks (p < .05). Besides, it displayed higher BIC% at 4 weeks (p < .05) in normal rats. Also, SLA-Sr surfaces upregulated expression of OPG at 4 weeks (p < .05) in diabetic rats. What's more, SLA-Sr surfaces downregulated inflammation (TNF-α, IL-1β, and IL-6; p < .01) in diabetic rats at 3 days. In addition, expression of Wnt5a and ROR2 was upregulated (p < .05) at 7 days after implantation under diabetes.

CONCLUSION

It is suggested that strontium-incorporated titanium implant surfaces by hydrothermal treatment could enhance implant osseointegration as compared with SLA implant surfaces in diabetic rats.

Effects of strontium-incorporated micro/nano rough titanium surfaces on osseointegration via modulating polarization of macrophages

Macrophages perform multiple functions in both inflammation and wound healing, and are one of the fore front cells during implant osseointegration that influence subsequent process. Essential trace element modification may effectively modulate titanium implant surface biological properties. In this work, strontium (Sr) incorporated micro/nano rough titanium surfaces (Sr-SLA) was fabricated by hydrothermal treatment, and immunoreaction of macrophages was further investigated. In vitro results revealed that Sr doping inhibited inflammatory response of macrophages, further attenuated the inhibitory effect on following bone marrow derived cells (BMSCs) osteogenic differentiation. The regulation of macrophages by Sr-SLA likely involved ERK signaling pathway. Consistently, the in vivo study showed that compared with titanium surface sand-blasted with large grit and double acid-etched (SLA) implants, Sr-SLA implants could enhance new bone formation accompanied with more alternatively activated M2 macrophages infiltration and less classically activated M1 macrophages infiltration. These results reveal the immunomodulatory ability of Sr-SLA of adjusting the functional status of macrophages through inhibiting M1 polarization while promoting M2 polarization.

Zinc- and strontium- co-incorporated nanorods on titanium surfaces with favorable material property, osteogenesis, and enhanced antibacterial activity

Early infection and peri-implantitis after implant restoration are major reasons for dental implant failure. Implant-associated infections are majorly attributed to biofilm formation. In this study, co-incorporated zinc- (Zn-) and strontium- (Sr-) nanorod coating on sandblasted and acid-etched (SLA) titanium (SLA-Zn/Sr) was fabricated by hydrothermal synthesis. It was aimed at promoting osteogenesis while inhibiting biofilm formation. The nanorod-like particles (φ 30-50 nm) were found to be evenly formed on SLA-Zn/Sr (Zn: 1.49 ± 0.16 wt%; Sr: 21.69 ± 2.74 wt%) that was composed of well-crystallized ZnTiO₃ and SrTiO₃ phases. With a sufficient interface bonding strength (42.00 ± 3.00 MPa), SLA-Zn/Sr enhanced the corrosion resistance property of titanium. Besides, SLA-Zn/Sr promoted the cellular initial adhesion, proliferation and osteogenic differentiation of rBMSCs in vitro while inhibiting the adhesion of Staphylococcus aureus and Porphyromonas gingivalis . In addition, through down-regulating icaA gene expression, this novel surface reduced the secretion of polysaccharide intercellular adhesion (reduced by 87.9% compared to SLActive) to suppress the S. aureus biofilm formation. We, therefore, propose a new chemical modification on titanium for multifunctional implant material development. Due to the Zn/Sr co-doping in coating, material properties, early osteogenic effect and antibacterial ability of titanium can be simultaneously enhanced, which has the potential to be applied in dental implantation in the future.

Antibacterial coating of tooth surface with ion-releasing pre-reacted glass-ionomer (S-PRG) nanofillers

OBJECTIVES

Surface pre-reacted glass-ionomer (S-PRG) fillers release antibacterial borate and fluoride ions. We fabricated nanoscale S-PRG fillers (S-PRG nanofillers) for antibacterial coating of tooth surfaces and assessed the antibacterial effects of this coating in vitro. In addition, we creating a canine model of periodontitis to evaluate the effectiveness of S-PRG nanofiller application on tooth roots and improvement of periodontal parameters.

METHODS

Human dentin blocks were coated with S-PRG nanofiller (average particle size: 0.48 μm) and then characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), and ion-releasing test. Antibacterial effects of dentin blocks coated with S-PRG nanofiller were examined using bacterial strains, Streptococcus mutans and Actinomyces naeslundii. Next, we created an experimental model of periodontitis in furcation of premolars of beagle dogs. Then, S-PRG nanofiller coating was applied onto exposed tooth root surfaces. Periodontal parameters, gingival index (GI), bleeding on probing (BOP), probing pocket depth (PPD), and clinical attachment level (CAL), were measured from baseline until 4 weeks. In addition, bone healing was radiographically and histologically examined.

RESULTS

SEM and EDX revealed that S-PRG nanofillers uniformly covered the dentin surface after coating. Dentin blocks coated with S-PRG nanofiller showed ion-releasing property, bacterial growth inhibition, and sterilization effects. In the experimental periodontitis model, S-PRG nanofiller coating significantly reduced clinical inflammatory parameters, such as GI (P < 0.01) and BOP (P < 0.05), compared to uncoated samples. In addition, PPD and CAL significantly decreased by S-PRG nanofiller coating (2 weeks: P < 0.05; 3 and 4 weeks: P < 0.01), suggesting the improvement of periodontitis. Micro-CT and histology revealed that bone healing of furcation defects was enhanced by S-PRG nanofiller coating.

CONCLUSION

S-PRG nanofiller coating provides antibacterial effects to tooth surfaces and improves clinical parameters of periodontitis.

Tanfloc/heparin polyelectrolyte multilayers improve osteogenic differentiation of adipose-derived stem cells on titania nanotube surfaces

In this study, a surface modification strategy using natural biopolymers on titanium is proposed to improve bone healing and promote rapid and successful osseointegration of orthopedic implants. Titania nanotubes were fabricated via an anodization process and the surfaces were further modified with polyelectrolyte multilayers (PEMs) based on Tanfloc (a cationic tannin derivative) and glycosaminoglycans (heparin and hyaluronic acid). Scanning electron microscopy (SEM), water contact angle measurements, and X-ray photoelectron spectroscopy were used to characterize the surfaces. Adipose-derived stem cells (ADSCs) were seeded on the surfaces, and the cell viability, adhesion, and proliferation were investigated. Osteogenesis was induced and osteogenic differentiation of human ADSCs on the surfaces was evaluated via mineralization and protein expression assays, immunofluorescent staining, and SEM. The Tanfloc/heparin PEMs on titania nanotubes improved the rate of osteogenic differentiation of ADSCs as well as the bone mineral deposition, and is therefore a promising approach for use in orthopedic implants.

Stem cell recruitment based on scaffold features for bone tissue engineering

Stem-cell based therapy strategies are promising approaches for the treatment of bone defects. However, extensive cell expansion steps, the low rate of cell survival and uncontrolled differentiation of stem cells transplanted into the body currently remain key challenges in advancing stem cell therapeutics. An alternative strategy is to use specifically designed bone scaffolds to recruit endogenous stem cells upon implantation and to stimulate new bone formation and remodeling. Stem cell recruitment based on scaffold features for bone tissue engineering relies on the development of scaffolds that can effectively mobilize and recruit endogenous stem cells to the implantation site. This article addresses the recent advances in the recruitment of endogenous stem cells in applications of bone scaffolds, particularly focusing on chemical modification and physical characteristic modification of the scaffold for endogenous stem cell homing and recruitment. Finally, the continuing challenges and future directions of scaffold-based stem cell recruitment are discussed.

Nano-needle strontium-substituted apatite coating enhances osteoporotic osseointegration through promoting osteogenesis and inhibiting osteoclastogenesis

Implant loosening remains a major clinical challenge for osteoporotic patients. This is because osteoclastic bone resorption rate is higher than osteoblastic bone formation rate in the case of osteoporosis, which results in poor bone repair. Strontium (Sr) has been widely accepted as an anti-osteoporosis element. In this study, we fabricated a series of apatite and Sr-substituted apatite coatings via electrochemical deposition under different acidic conditions. The results showed that Ca and Sr exhibited different mineralization behaviors. The main mineralization products for Ca were CaHPO₄·2H₂O and Ca₃(PO₄)₂ with the structure changed from porous to spherical as the pH values increased. The main mineralization products for Sr were SrHPO₄ and Sr₅(PO₄)₃OH with the structure changed from flake to needle as the pH values increased. The in vitro experiment demonstrated that coatings fabricated at high pH condition with the presence of Sr were favorable to MSCs adhesion, spreading, proliferation, and osteogenic differentiation. In addition, Sr-substituted apatite coatings could evidently inhibit osteoclast differentiation and fusion. Moreover, the in vivo study indicated that nano-needle like Sr-substituted apatite coating could suppress osteoclastic activity, improve new bone formation, and enhance bone-implant integration. This study provided a new theoretical guidance for implant coating design and the fabricated Sr-substituted coating might have potential applications for osteoporotic patients.

∙

Ca²⁺ and Sr²⁺ showed different mineralization behaviors in acidic environments.

•

Apatites fabricated at high pH conditions were beneficial to MSCs growth.

•

Sr-substituted apatite exhibited superior anti-osteoclast activity ability.

•

Sr-substituted apatite facilitated osteogenesis, bone growth, and osseointegration.

Hydrofluoric acid and nitric acid cotreatment for biofunctionalization of polyetheretherketone in M2 macrophage polarization and osteogenesis

Due to its excellent mechanical and low-friction properties, polyetheretherketone (PEEK) has been widely investigated for use in orthopedic applications over the past decade. However, the bioinertness and poor osteogenic properties of PEEK have hampered its clinical application. In this study, the surface of PEEK was modified by co-treatment with hydrofluoric acid and nitric acid (AFN). The microstructures of the modified PEEK surfaces were investigated using scanning electron microscopy. The water contact angles of the surfaces were also measured. To evaluate their cytocompatibility, PEEK samples were used as substrates to culture rat bone mesenchymal stem cells, and cell adhesion, viability, and expression of specific marker genes were measured. Treatment of PEEK with AFN (PEEK-AFN) was found to enable better osteoblast adhesion, spreading, and proliferation; the activity of alkaline phosphatase (an early osteogenic differentiation marker) was also found to be enhanced post-treatment. Furthermore, PEEK-AFN was able to modulate macrophage polarization and down regulated the expression of proinflammatory factors via inhibiting the NF-κB pathway. Thus, treatment of PEEK with AFN could promote M2 polarization of the macrophages and stimulate the differentiation of osteoblasts. These results provide valuable information that could facilitate the use of PEEK-based composites as bone implant materials.

Enhanced osteogenesis of hydroxyapatite scaffolds by coating with BMP-2-loaded short polylactide nanofiber: a new drug loading method for porous scaffolds

Porous hydroxyapatite (HA) is widely used in porous forms to assist bone defect healing. However, further improvements in biological functions are desired for meeting complex clinical situations such as impaired bone regeneration in poor bone stock. The extracellular matrix (ECM) of human tissues is characterized by nanofibrous structures and a variety of signal molecules. Emulating these characteristics are expected to create a favorable microenvironment for cells and simultaneously allow release of osteogenic molecules. In this study, short polylactide fibers containing BMP-2 were prepared by electrospinning and coated on porous HA scaffolds. The coating did not affect porosity or pore interconnectivity of the scaffold but improved its compressive strength markedly. This fiber coating produced burst BMP-2 release in 1 day followed by a linear release for 24 days. The coating had a significantly lower rat calvarial osteoblasts (RCOBs) adhesion (vs. uncoated scaffold) but allowed normal proliferation subsequently. Bone marrow stem cells (MSCs) on the coated scaffolds expressed a significantly increased alkaline phosphatase activity relative to the uncoated ones. After implantation in canine dorsal muscles, the coated scaffolds formed significantly more new bone at Weeks 4 and 12, and more blood vessels at Week 12. This method offers a new option for drug delivery systems.

Reconfigurable Surface with Photodefinable Physicochemical Properties for User-Designable Cell Scaffolds

Surfaces with specific topography and chemical composition are quite useful in many applications ranging from functional interfaces to cell incubation scaffolds. Although these surfaces can be easily fabricated by combining topography-construction methods and surface-functionalization strategies, their properties are often static after fabrication or merely switchable between "on" and "off" states. Developing surfaces that can be on-demand regulated are quite important for the generation of smart surfaces for future applications. In this paper, we present a reconfigurable surface with adjustable topography and chemical functionality utilizing the photodynamic feature of the disulfide bond. Structured surfaces, composed of disulfide-cross-linked polymer networks, were prepared by using disulfide-containing methacrylate as the monomer. We show that the topography and chemical functionality of the surface can be on-demand regulated after its fabrication, with 254 and 365 nm UV light, respectively, allowing to "define" the physicochemical properties of the surface using light before the usage. We also demonstrate the application of such surface as a user-designable cell scaffold, that different cell scaffolds can be generated from one original surface with a simple exposure process, to define the desired bioactivity onto every point of the surface and therefore exactly control cell behaviors on the scaffold.

Exosomes influence the behavior of human mesenchymal stem cells on titanium surfaces

Mesenchymal stem cells (MSCs) have important roles during osseointegration. This study determined (i) if MSC-derived extracellular vesicles (EVs)/exosomes can be immobilized on titanium (Ti) surfaces and influence the behavior of MSCs, (ii) if the response is differentially affected by EVs from expanded vs differentiated MSCs and (iii) if the EV protein cargos predict the functional features of the exosomes. EVs secreted by human adipose-derived MSCs were isolated by ultracentrifugation and analyzed using nanoparticle tracking analysis, Western blotting and relative quantitative mass spectrometry. Fluorescence microscopy, scanning electron microscopy, cell counting assay and quantitative polymerase chain reaction were used to analyze MSC adhesion, proliferation and differentiation. Exosome immobilization on Ti promoted MSC adhesion and spreading after 24 h and proliferation after 3 and 6 days, irrespective of whether the exosomes were obtained from expansion or differentiation conditions. Immobilized exosomes upregulated stromal cell-derived factor (SDF-1α) gene expression. Cell adhesion molecules and signaling molecules were abundant in the exosomal proteome. The predicted functions of the equally-abundant proteins in both exosome types were in line with the observed biological effects mediated by the exosomes. Thus, exosomes derived from MSCs and immobilized on Ti surfaces interact with MSCs and rapidly promote MSC adhesion and proliferation. These findings provide a novel route for modification of titanium implant surfaces.

AMOT130/YAP pathway in topography-induced BMSC osteoblastic differentiation

Micro/nano-topography (MNT) is an important variable affecting osseointegration of bone biomaterials, but the underlying mechanisms are not fully understood. We probed the role of a AMOT130/YAP pathway in osteoblastic differentiation of bone marrow mesenchymal stems cultured on titanium (Ti) carrying MNTs. Ti surfaces with two well-defined MNTs (TiO2 nanotubes of different diameters and wall thicknesses) were prepared by anodization. Rat BMSCs were cultured on flat Ti and Ti surfaces carrying MNTs, and cell behaviors (i.e., morphology, F-actin development, osteoblastic differentiation, YAP localization) were studied. Ti surfaces carrying MNTs increased F-actin formation, osteoblastic gene expression, and protein AMOT130 production in BMSCs (all vs. flat Ti), and the surface carrying larger nantubes was more effective, confirming osteoblastic differentiation induced by MNTs. Elevation of the AMOT130 level (by inhibiting its degradation) increased the osteoblastic gene expression, F-actin formation, and nuclear localization of YAP. These show that, AMOT130/YAP is an important pathway mediating the translation of MNT signals to BMSC osteoblastic commitment, likely via the cascade: AMOT130 promotion of F-actin formation, increased YAP nuclear import, and activation of osteoblastic gene expression.

Effect of the Wnt signal-RANKL/OPG axis on the enhanced osteogenic integration of a lithium incorporated surface

Bone remolding involves the formation of new bone by osteoblasts and the absorption of old bones by osteoclasts. Due to the vital role of osteoblasts and osteoclasts during bone regeneration, it might be feasible to promote osseointegration around the titanium implants by stimulating osteoblasts and inhibiting osteoclasts by modifying the surfaces of the implants. Lithium is used in the treatment of psychiatric patients, and it may be associated with osteogenesis. In this study, lithium was incorporated with sandblasted, large-grit and acid-etched titanium implants via a hydrothermal treatment. In vitro, the nano-scale surface enhanced the adhesion and proliferation of bone marrow mesenchymal stem cells (BMSCs). Moreover, the SLA-Li surface displayed a negative effect on the process of osteoclastogenesis. Further mechanism analysis indicated that the canonical Wnt/β-catenin signaling pathway was activated according to the results of RT-PCR and western blotting. More importantly, the RANKL/OPG signaling axis was also involved in these effects on the SLA-Li surface. The experiments in vivo proved that the SLA-Li surface could induce the bone formation and osseointegration during the early osseointegration after the dental implant surgery. These results suggested that bone homeostasis could be manipulated by an SLA-Li surface, which implied that this new surface might serve as a promising material for clinical application in the future.

Application of a Strontium-Loaded, Phase-Transited Lysozyme Coating to a Titanium Surface to Enhance Osteogenesis and Osteoimmunomodulation

Background

To fabricate strontium (Sr)-incorporated titanium (Ti) surfaces by a novel 1-step phase-transited lysozyme (PTL) treatment, and investigate the effects of the prepared samples on osteogenesis and osteoimmunoregulation.

Material/Methods

Five groups of titanium specimens were prepared, including Ti, PTL, PTL@10Sr (PTL coating with 10 mg/mL Sr), PTL@20Sr PTL coating with 20 mg/mL Sr), and PTL@50Sr (PTL coating with 50 mg/mL Sr) groups. Behaviors of bone marrow mesenchymal stem cells (BMSCs) such as initial attachment, spread, proliferation, and migration, on different surfaces were examined by immunofluorescence, MTS assay, and Transwell system. Then the osteogenic differentiation of BMSCs was detected. When an immune response was factored in, the polarization of macrophages induced by the prepared surfaces was detected by real-time PCR, and the response of BMSCs to macrophage-conditioned medium was assessed in terms of cell migration and osteogenic differentiation. Finally, an in vivo study was performed, using the rat femora implant model, to evaluate the potential for osteogenic induction and osteoimmunoregulation of materials.

Results

Our in vitro experiments indicated that PTL coating could improve cell spread and adhesion, and the stable Sr release of PTL@Sr layers could promote cell migration and osteogenesis. Moreover, PTL@Sr surface could regulate the immune response of macrophages resulting in enhanced BMSCs recruitment and osteogenic differentiation. The in vivo evaluation showed less inflammatory infiltration and improved bone formation in the PTL@20Sr group.

Conclusions

The Sr-loaded PTL layers have greater potential for the induction of osteogenic differentiation of BMSCs, meanwhile Sr-loaded PTL layers could adjust the immune response and thus promote osteogenesis both in vitro and in vivo.

Microporous Coatings of PEKK/SN Composites Integration with PEKK Exhibiting Antibacterial and Osteogenic Activity, and Promotion of Osseointegration for Bone Substitutes

To improve the antibacterial and osteogenic activities of poly(etherketoneketone) (PEKK), concentrated sulfuric acid (H₂SO₄) suspension with silicon nitride (SN) microparticle was utilized to modify PEKK surface. Through sulfonation reaction, microporous coatings of PEKK/SN composites were created on PEKK surface, which were integrated with PEKK substrate. The results showed that the content of SN in the microporous coatings increased with the increase of SN content in H₂SO₄ suspension (PKS without SN, PKSC5 and PKSC10 with 5 and 10 wt % SN content in H₂SO₄) and that the surface roughness and hydrophilicity of microporous coatings on PEKK were significantly improved with the SN content increasing. In addition, the microporous coating of PKSC10 with high SN content exhibited excellent antibacterial activity due to the synergistic action of the presence of amino (-NH₂) and sulfonic acid (-SO₃H) groups as well as the improvement of protein absorption. Moreover, the microporous coating of PKSC10 obviously stimulated adhesion, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells. Furthermore, histological and push-out load evaluation indicated that the microporous coating of PKSC10 significantly promoted osteogenesis and osseointegration in vivo. The results suggested that the microporous coating of PKSC10 with high SN content display good biocompatibility, antibacterial and osteogenic activities, and osseointegration ability, which would have great potential for bone substitutes.

Role of p53 mediated miR-23a/CXCL12 pathway in osteogenic differentiation of bone mesenchymal stem cells on nanostructured titanium surfaces

Titanium surface modification is widely established and has been proven to improve the osseointegration, but the molecular mechanism remains to be fully elucidated. MicroRNAs serve vital roles in the process of regulating osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). In this study, we report that miR-23a was significantly down-regulated in the osteogenic differentiation process of BMSCs on nanostructured titanium surfaces. Elevated miR-23a inhibited osteogenic differentiation of BMSCs, and decreased miR-23a enhanced this process. In addition, we also observed that CXCL12 was a direct target of miR-23a. Knockdown of CXCL12 inhibited nanotube Ti induced-osteogenic differentiation of BMSCs, similar to the effect of upregulation of miR-23a. Finally, p53 was decreased and it regulated miR-23a/CXCL12 axis during nanotube Ti induced-osteogenic differentiation of BMSCs. Therefore, our findings suggest that by targeting CXCL12, miR-23a serves a vital role in osteogenic differentiation of BMSCs cultured on nanostructured titanium surfaces, which may provide novel clinical treatments for osseointegration.