The effect of epididymosomes on the development of frozen-thawed mouse spermatogonial stem cells after culture in a decellularized testicular scaffold and transplantation into azoospermic mice

PURPOSE

This study examined SSC proliferation on an epididymosome-enriched decellularized testicular matrix (DTM) hydrogel and spermatogenesis induction in azoospermic mice.

METHODS

Epididymosomes were extracted and characterized using SEM and western blotting. After cryopreservation, thawed SSCs were cultured in a hydrogel-based three-dimensional (3D) culture containing 10 ng/mL GDNF or 20 µg/mL epididymosomes. SSCs were assessed using the MTT assay, flow cytometry, and qRT-PCR after two weeks of culture. The isolated SSCs were microinjected into the efferent ducts of busulfan-treated mice. DiI-labeled SSCs were followed, and cell homing was assessed after two weeks. After 8 weeks, the testes were evaluated using morphometric studies and immunohistochemistry.

RESULTS

The expression of PLZF, TGF-β, and miR-10b did not increase statistically significantly in the 3D + GDNF and 3D + epididymosome groups compared to the 3D group. Among the groups, the GDNF-treated group exhibited the highest expression of miR-21 (*P < 0.05). Caspase-3 expression was lower in the epididymosome-treated group than in the other groups (***P < 0.001). Compared to the 3D and negative control groups, the 3D + epididymosomes and 3D + GDNF groups showed an increase in spermatogenic cells. Immunohistochemical results confirmed the growth and differentiation of spermatogonial cells into spermatids in the treatment groups.

CONCLUSION

The DTM hydrogel containing 20 µg/mL epididymosomes or 10 ng/mL GDNF is a novel and safe culture system that can support SSC proliferation in vitro to obtain adequate SSCs for transplantation success. It could be a novel therapeutic agent that could recover deregulated SSCs in azoospermic patients.

In vitro proliferation and differentiation of mouse spermatogonial stem cells in decellularized human placenta matrix

Utilizing natural scaffold production derived from extracellular matrix components presents a promising strategy for advancing in vitro spermatogenesis. In this study, we employed decellularized human placental tissue as a scaffold, upon which neonatal mouse spermatogonial cells (SCs) were cultured three-dimensional (3D) configuration. To assess cellular proliferation, we examined the expression of key markers (Id4 and Gfrα1) at both 1 and 14 days into the culture. Our quantitative reverse transcription-polymerase chain reaction (qRT-PCR) analysis revealed a notable increase in Gfrα1 gene expression, with the 3D culture group exhibiting the highest levels. Furthermore, the relative frequency of Gfrα1-positive cells significantly rose from 38.1% in isolated SCs to 46.13% and 76.93% in the two-dimensional (2D) and 3D culture systems, respectively. Moving forward to days 14 and 35 of the culture period, we evaluated the expression of differentiating markers (Sycp3, acrosin, and Protamine 1). Sycp3 and Prm1 gene expression levels were upregulated in both 2D and 3D cultures, with the 3D group displaying the highest expression. Additionally, acrosin gene expression increased notably within the 3D culture. Notably, at the 35-day mark, the percentage of Prm1-positive cells in the 3D group (36.4%) significantly surpassed that in the 2D group (10.96%). This study suggests that the utilization of placental scaffolds holds significant promise as a bio-scaffold for enhancing mouse in vitro spermatogenesis.

Polycaprolactone/Testicular Extracellular Matrix/Graphene Oxide-Based Electrospun Tubular Scaffolds for Reproductive Medicine: Biomimetic Architecture of Seminiferous Tubules

Numerous scaffolds are developed in the field of testicular bioengineering. However, effectively replicating the spatial characteristics of native tissue, poses a challenge in maintaining the requisite cellular arrangement essential for spermatogenesis. In order to mimic the structural properties of seminiferous tubules, the objective is to fabricate a biocompatible tubular scaffold. Following the decellularization process of the testicular tissue, validation of cellular remnants' elimination from the specimens is conducted using 4',6-diamidino-2-phenylindole staining, hematoxylin and eosin staining, and DNA content analysis. The presence of extracellular matrix (ECM) components is confirmed through Alcian blue, Orcein, and Masson's trichrome staining techniques. The electrospinning technique is employed to synthesize the scaffolds using polycaprolactone (PCL), extracted ECM, and varying concentrations of graphene oxide (GO) (0.5%, 1%, and 2%). Subsequently, comprehensive evaluations are performed to assess the properties of the synthetic scaffolds. These evaluations encompass Fourier-transform infrared spectroscopy, scanning electron microscopy imaging, scaffold degradation testing, mechanical behavior analysis, methylthiazolyldiphenyl-tetrazolium bromide assay, and in vivo biocompatibility assessment. The PCL/decellularized extracellular matrix with 0.5% GO formulation exhibits superior fiber morphology and enhanced mechanical properties, and outperforms other groups in terms of in vitro biocompatibility. Consequently, these scaffolds present a viable option for implementation in "in vitro spermatogenesis" procedures, holding promise for future sperm production from spermatogonial cells.

In vitro spermatogenesis in artificial testis: current knowledge and clinical implications for male infertility

Men's reproductive health exclusively depends on the appropriate maturation of certain germ cells known as sperm. Certain illnesses, such as Klinefelter syndrome, cryptorchidism, and syndrome of androgen insensitivity or absence of testis maturation in men, resulting in the loss of germ cells and the removal of essential genes on the Y chromosome, can cause non-obstructive azoospermia. According to laboratory research, preserving, proliferating, differentiating, and transplanting spermatogonial stem cells or testicular tissue could be future methods for preserving the fertility of children with cancer and men with azoospermia. Therefore, new advances in stem cell research may lead to promising therapies for treating male infertility. The rate of progression and breakthrough in the area of in vitro spermatogenesis is lower than that of SSC transplantation, but newer methods are also being developed. In this regard, tissue and cell culture, supplements, and 3D scaffolds have opened new horizons in the differentiation of stem cells in vitro, which could improve the outcomes of male infertility. Various 3D methods have been developed to produce cellular aggregates and mimic the organization and function of the testis. The production of an artificial reproductive organ that supports SSCs differentiation will certainly be a main step in male infertility treatment.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Advances of three-dimensional (3D) culture systems for in vitro spermatogenesis

The loss of germ cells and spermatogenic failure in non-obstructive azoospermia are believed to be the main causes of male infertility. Laboratory studies have used in vitro testicular models and different 3-dimensional (3D) culture systems for preservation, proliferation and differentiation of spermatogonial stem cells (SSCs) in recent decades. The establishment of testis-like structures would facilitate the study of drug and toxicity screening, pathological mechanisms and in vitro differentiation of SSCs which resulted in possible treatment of male infertility. The different culture systems using cellular aggregation with self-assembling capability, the use of different natural and synthetic biomaterials and various methods for scaffold fabrication provided a suitable 3D niche for testicular cells development. Recently, 3D culture models have noticeably used in research for their architectural and functional similarities to native microenvironment. In this review article, we briefly investigated the recent 3D culture systems that provided a suitable platform for male fertility preservation through organ culture of testis fragments, proliferation and differentiation of SSCs.

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.

3D-printed placental-derived bioinks for skin tissue regeneration with improved angiogenesis and wound healing properties

Extracellular matrix (ECM)-based bioinks has attracted much attention in recent years for 3D printing of native-like tissue constructs. Due to organ unavailability, human placental ECM can be an alternative source for the construction of 3D print composite scaffolds for the treatment of deep wounds. In this study, we use different concentrations (1.5%, 3% and 5%w/v) of ECM derived from the placenta, sodium-alginate and gelatin to prepare a printable bioink biomimicking natural skin. The printed hydrogels' morphology, physical structure, mechanical behavior, biocompatibility, and angiogenic property are investigated. The optimized ECM (5%w/v) 3D printed scaffold is applied on full-thickness wounds created in a mouse model. Due to their unique native-like structure, the ECM-based scaffolds provide a non-cytotoxic microenvironment for cell adhesion, infiltration, angiogenesis, and proliferation. In contrast, they do not show any sign of immune response to the host. Notably, the biodegradation, swelling rate, mechanical property, cell adhesion and angiogenesis properties increase with the increase of ECM concentrations in the construct. The ECM 3D printed scaffold implanted into deep wounds increases granulation tissue formation, angiogenesis, and re-epithelialization due to the presence of ECM components in the construct, when compared with printed scaffold with no ECM and no treatment wound. Overall, our findings demonstrate that the 5% ECM 3D scaffold supports the best deep wound regeneration in vivo, produces a skin replacement with a cellular structure comparable to native skin.

Biomaterials for Testicular Bioengineering: How far have we come and where do we have to go?

Traditional therapeutic interventions aim to restore male fertile potential or preserve sperm viability in severe cases, such as semen cryopreservation, testicular tissue, germ cell transplantation and testicular graft. However, these techniques demonstrate several methodological, clinical, and biological limitations, that impact in their results. In this scenario, reproductive medicine has sought biotechnological alternatives applied for infertility treatment, or to improve gamete preservation and thus increase reproductive rates in vitro and in vivo. One of the main approaches employed is the biomimetic testicular tissue reconstruction, which uses tissue-engineering principles and methodologies. This strategy pursues to mimic the testicular microenvironment, simulating physiological conditions. Such approach allows male gametes maintenance in culture or produce viable grafts that can be transplanted and restore reproductive functions. In this context, the application of several biomaterials have been proposed to be used in artificial biological systems. From synthetic polymers to decellularized matrixes, each biomaterial has advantages and disadvantages regarding its application in cell culture and tissue reconstruction. Therefore, the present review aims to list the progress that has been made and the continued challenges facing testicular regenerative medicine and the preservation of male reproductive capacity, based on the development of tissue bioengineering approaches for testicular tissue microenvironment reconstruction.

Organoids of the male reproductive system: Challenges, opportunities, and their potential use in fertility research

Organoids are units of function of a given organ able to reproduce, in culture, a biological structure similar in architecture and function to its counterpart in vivo. Today, it is possible to develop an organoid from a fragment of tissue, a stem cell located in an adult organ, an embryonic stem cell, or an induced pluripotent stem cell. In the past decade, many organoids have been developed which mimic stomach, pancreas, liver and brain tissues, optic cups, among many others. Additionally, different male reproductive system organs have already been developed as organoids, including the prostate and testis. These 3D cultures may be of great importance for urological cancer research and have the potential to be used in fertility research for the study of spermatozoa production and maturation, germ cells-somatic cells interactions, and mechanisms of disease. They also provide an accurate preclinical pipeline for drug testing and discovery, as well as for the study of drug resistance. In this work, we revise the current knowledge on organoid technology and its use in healthcare and research, describe the male reproductive system organoids and other biomaterials already developed, and discuss their current application. Finally, we highlight the research gaps, challenges, and opportunities in the field and propose strategies to improve the use of organoids for the study of male infertility situations. This article is categorized under: Reproductive System Diseases > Stem Cells and Development Reproductive System Diseases > Biomedical Engineering.

Differentiation of human spermatogonial stem cells using a human decellularized testicular scaffold supplemented by platelet-rich plasma

BACKGROUND

Effective culture systems for attachment, migration, proliferation, and differentiation of spermatogonial stem cells (SSCs) can be a promising therapeutic modality for preserving male fertility. Decellularized extracellular matrix (ECM) from native testis tissue creates a local microenvironment for testicular cell culture. Furthermore, platelet-rich plasma (PRP) contains various growth factors for the proliferation and differentiation of SSCs.

METHODS

In this study, human testicular cells were isolated and cultured for 4 weeks, and SSCs were characterized using immunocytochemistry (ICC) and flow cytometry. Human testicular tissue was decellularized (0.3% SDS, 1% Triton), and the efficiency of the decellularization process was confirmed by histological staining and DNA content analysis. SSCs were cultured on the human decellularized testicular matrix (DTM) for 4 weeks. The viability and the expression of differentiation genes were evaluated by MTT and real-time polymerase chain reaction (PCR), respectively.

RESULTS

Histological evaluation and DNA content analysis showed that the components of ECM were preserved during decellularization. Our results showed that after 4 weeks of culture, the expression levels of BAX, BCL-2, PLZF, and SCP3 were unchanged, while the expression of PRM2 significantly increased in the cells cultured on DTM supplemented with PRP (ECM-PRP). In addition, the expression of GFRA1 was significantly decreased in the ECM group compared to the control and PRP groups. Furthermore, the MTT test indicated that viability was significantly enhanced in cells plated on DTM supplemented with PRP.

CONCLUSION

Our study demonstrated that DTM supplemented with PRP can provide an effective culture system for the differentiation and viability of SSCs.

Differentiation of neonate mouse spermatogonia on two-dimensional and three-dimensional culture systems supplemented with d-Serine and Dizocilpine (MK-801)

N-methyl-d-aspartate (NMDA) modulates the spermatogenesis process through stimulating the steroid hormone biosynthesis. The aim of this study was to evaluate the effects of NMDA receptors agonists (d-Serine) and antagonists (MK801) on spermatogonia differentiation on decellularization testicular matrix (DTM) hydrogel scaffold. Four treatment groups were planned: 2D + D-Serine, 3D + D-Serine, 2D + MK801, and 3D + MK801. Results showed that cell viability was significantly decreased after 48 h in the 3D + D-Serine group and after 24 and 48 h in the 3D + MK801 group compared to the controls. The spermatogonia proliferation after two, four, and eight weeks was significantly increased in the 3D + D-Serine culture, while it was significantly reduced in the 2D + MK801 and 3D + MK801 groups after four and eight weeks. Real-time PCR results demonstrated that pre-meiotic gene (Plzf) expression was significantly increased only in the 3D + D-Serine culture compared to the control groups after four weeks of culture. The meiotic gene (Sycp3) expression was significantly increased in the 2D + D-Serine and 3D + D-Serine compared to the 2D controls after four and eight weeks. The post-meiotic gene (Tnp1) level in the 3D + D-Serine was significantly higher than the other groups. Flow-cytometry results indicated that the protein expression of Plzf (after four and eight weeks), Sycp3 (after eight weeks), and Tnp1 (after eight weeks) in the d-Serine-treated groups was significantly increased compared with the 2D control groups. There were not any significant changes in the gene expression of spermatogenic-related markers in MK801 culture media. However, a significant decrease in the protein levels of Plzf after eight weeks and Sycp3 after four and eight weeks was observed. In conclusion, the addition of NMDARs agonists (d-Serine) could be used to regulate the differentiation of spermatogonia in the 3D culture system.

Generation and Characterization of Bovine Testicular Organoids Derived from Primary Somatic Cell Populations

Organoids are 3D-culture systems composed of tissue-specific primary cells that self-organize and self-renew, creating structures similar to those of their tissue of origin. Testicular organoids (TOs) may recreate conditions of the testicular niche in domestic and wild cattle; however, no previous TO studies have been reported in the bovine species. Thus, in the present study, we sought to generate and characterize bovine TOs derived from primary testicular cell populations including Leydig, Sertoli and peritubular myoid cells. Testicular cells were isolated from bovine testes and cultured in ultra-low attachment (ULA) plates and Matrigel. TOs were cultured in media supplemented from day 3 with 100 ng/mL of BMP4 and 10 ng/mL of FGF2 and from day 7 with 15 ng/mL of GDNF. Testicular cells were able to generate TOs after 3 days of culture. The cells positive for STAR (Leydig) and COL1A (peritubular myoid) decreased (p < 0.05), whereas cells positive for WT1 (Sertoli) increased (p < 0.05) in TOs during a 28-day culture period. The levels of testosterone in media increased (p < 0.05) at day 28 of culture. Thus, testicular cells isolated from bovine testes were able to generate TOs under in vitro conditions. These bovine TOs have steroidogenic activity characterized by the production of testosterone.

The Many Moral Matters of Organoid Models: A systematic review of reasons

OBJECTIVE

To present the ethical issues, moral arguments, and reasons found in the ethical literature on organoid models.

DESIGN

In this systematic review of reasons in ethical literature, we selected sources based on predefined criteria: (1) The publication mentions moral reasons or arguments directly relating to the creation and/or use of organoid models in biomedical research; (2) These moral reasons and arguments are significantly addressed, not as mere passing mentions, or comprise a large portion of the body of work; (3) The publication is peer-reviewed and published in an academic article, book, national-level report, working paper, or Ph.D. thesis; (4) The publications collected are in English.

ANALYSIS

Each article was read in-depth for identifiable moral reasons, arguments, and concerns. These were then inductively classified and synthesized to create broader categories of reasons, and eventually an overarching conceptual scheme was created.

RESULTS

A total of twenty-three sources were included and analyzed out of an initial 266 collected sources. Five themes of ethical issues and arguments were found: Animal Experimentation; Clinical Applications and Experiments; Commercialization and Consent; Organoid Ontology and Moral Status; and Research Ethics and Research Integrity. These themes are then further broken down into sub-themes and topics. Given the extensive nature of the topics found, we will focus on describing the topics that comprised of more in-depth reasons and arguments rather than few, passing mentions or concerns.

CONCLUSIONS

The ethics of organoids requires further deliberation in multiple areas, as much of the discussions are not presented as in-depth arguments. Such sentiments are also echoed throughout the organoid ethics literature.

In vitro production of mouse morphological sperm in artificial testis bioengineered by 3D printing of extracellular matrix

Since autologous stem cell transplantation is prone to cancer recurrence, in vitro sperm production is regarded a safer approach to fertility preservation. In this study, the spermatogenesis process on testicular tissue extracellular matrix (T-ECM)-derived printing structure was evaluated. Ram testicular tissue was decellularized using a hypertonic solution containing triton and the extracted ECM was used as a bio-ink to print an artificial testis. Following cell adhesion and viability examination, pre-meiotic and post-meiotic cells in the study groups (as testicular suspension and co-culture with Sertoli cells) were confirmed by real-time PCR, flow-cytometry and immunocytochemistry methods. Morphology of differentiated cells was evaluated using transmission electron microscopy (TEM), toluidine blue, Giemsa, and hematoxylin and eosin (H&E) staining. The functionality of Leydig and Sertoli cells was determined by their ability for hormone secretion. The decellularization of testicular tissue fragments was successful and had efficiently removed the cellular debris and preserved the ECM compounds. High cell viability, colonization, and increased expression of pre-meiotic markers in cultured testicular cells on T-ECM-enriched scaffolds confirmed their proliferation. Furthermore, the inoculation of neonatal mouse testicular cells onto T-ECM-enriched scaffolds resulted in the generation of sperm. Morphology evaluation showed that the structure of these cells was quite similar to mature sperm with a specialized tail structure. The hormonal analysis also confirmed production and secretion of testosterone and inhibin B by Leydig and Sertoli cells. T-ECM printed artificial testis is a future milestone that promises for enhancing germ cell maintenance and differentiation, toxicology studies, and fertility restoration to pave the way for new human infertility treatments in the future.

A brief history of testicular organoids: from theory to the wards

In recent years, researchers have successfully generated many human and mammalian organoid models, including organoids representing the intestine, prostate, ovary, bladder, liver, and brain. Therefore, organoids have become an important research model in the fields of regenerative medicine, drug research, and gene therapy, acting as a bridge between in vivo and in vitro experiments. In addition, testicular organoids (TOs) represent the highest level of in vitro culture of spermatogenic cells in a simulated testicular environment. However, the generation of TOs is still in the early stages, and there is still much room for improvement in dealing with the many challenges and prospects to achieve the goal of TOs that simulate the testicular microenvironment in vitro or even reconstruct the process of spermatogenesis without the need to reconstruct seminiferous tubules. We review the brief history of TO generation and some major strategies for functional applications of TOs, which are the main concerns of our clinicians and laboratory researchers.

Understanding the Underlying Molecular Mechanisms of Meiotic Arrest during In Vitro Spermatogenesis in Rat Prepubertal Testicular Tissue

In vitro spermatogenesis appears to be a promising approach to restore the fertility of childhood cancer survivors. The rat model has proven to be challenging, since germ cell maturation is arrested in organotypic cultures. Here, we report that, despite a meiotic entry, abnormal synaptonemal complexes were found in spermatocytes, and in vitro matured rat prepubertal testicular tissues displayed an immature phenotype. RNA-sequencing analyses highlighted up to 600 differentially expressed genes between in vitro and in vivo conditions, including genes involved in blood-testis barrier (BTB) formation and steroidogenesis. BTB integrity, the expression of two steroidogenic enzymes, and androgen receptors were indeed altered in vitro. Moreover, most of the top 10 predicted upstream regulators of deregulated genes were involved in inflammatory processes or immune cell recruitment. However, none of the three anti-inflammatory molecules tested in this study promoted meiotic progression. By analysing for the first time in vitro matured rat prepubertal testicular tissues at the molecular level, we uncovered the deregulation of several genes and revealed that defective BTB function, altered steroidogenic pathway, and probably inflammation, could be at the origin of meiotic arrest.

Perfusion in Organ-on-Chip Models and Its Applicability to the Replication of Spermatogenesis In Vitro

Organ/organoid-on-a-chip (OoC) technologies aim to replicate aspects of the in vivo environment in vitro, at the scale of microns. Mimicking the spatial in vivo structure is important and can provide a deeper understanding of the cell–cell interactions and the mechanisms that lead to normal/abnormal function of a given organ. It is also important for disease models and drug/toxin testing. Incorporating active fluid flow in chip models enables many more possibilities. Active flow can provide physical cues, improve intercellular communication, and allow for the dynamic control of the environment, by enabling the efficient introduction of biological factors, drugs, or toxins. All of this is in addition to the fundamental role of flow in supplying nutrition and removing waste metabolites. This review presents an overview of the different types of fluid flow and how they are incorporated in various OoC models. The review then describes various methods and techniques of incorporating perfusion networks into OoC models, including self-assembly, bioprinting techniques, and utilizing sacrificial gels. The second part of the review focuses on the replication of spermatogenesis in vitro; the complex process whereby spermatogonial stem cells differentiate into mature sperm. A general overview is given of the various approaches that have been used. The few studies that incorporated microfluidics or vasculature are also described. Finally, a future perspective is given on elements from perfusion-based models that are currently used in models of other organs and can be applied to the field of in vitro spermatogenesis. For example, adopting tubular blood vessel models to mimic the morphology of the seminiferous tubules and incorporating vasculature in testis-on-a-chip models. Improving these models would improve our understanding of the process of spermatogenesis. It may also potentially provide novel therapeutic strategies for pre-pubertal cancer patients who need aggressive chemotherapy that can render them sterile, as well asfor a subset of non-obstructive azoospermic patients with maturation arrest, whose testes do not produce sperm but still contain some of the progenitor cells.

Testis on a chip - a microfluidic 3-dimensional culture system for the development of spermatogenesisin-vitro

This research presents a novel Testis-on-a Chip- platform. Testicular cells are enzymatically isolated from the seminiferous tubules of sexually immature mice, seeded in a methylcellulose gel and cultured in a microfluidic chip. The unique design sandwiches the soft methylcellulose between stiffer agar support gels. The cells develop into organoids continuing to proliferate and differentiate. After seven weeks of culture the cells have over 95% viability. Confocal microscopy of the developed organoids reveals a structure containing the various stages of spermatogenesis up to and including meiosis II: premeiotic, meiotic and post-meiotic germ cells. The organoid structure also contains the supporting Sertoli and peritubular cells. The responsiveness of the system to the addition of testosterone and retinoic acid to the culture medium during the experiment are also investigated. As a benchmark, the Testis-on-a-Chip is compared to a conventional three-dimensional methylcellulose cell culture in a well plate. Analysis via FACS (Fluorescence-activated cell sorting) shows more haploid cells in the chip as compared to the plates. Immunofluorescence staining after seven weeks of culture shows more differentiated cells in the chip as compared to the well plate. This demonstrates the feasibility of our platform as well as its advantages. This research opens new horizons for the study and realization of spermatogenesis in-vitro. It can also enable the implementation of microfluidic technologies in future therapeutic strategies for pre pubertal male fertility preservation and adults with maturation arrest. Lastly, it can serve as a platform for drug and toxin testing.

Effect of NMDA receptor agonist and antagonist on spermatogonial stem cells proliferation in 2- and 3- dimensional culture systems

BACKGROUND

The main purpose of this study was to investigate the effect of D-serine (DS) and Dizocilpine (MK-801) on the proliferation of spermatogonial stem cells (SSCs) in two-dimensional (2D) and three-dimensional (3D) culture systems.

METHODS AND RESULTS

The SSCs of male NMRI mice were isolated by enzymatic digestion and cultured for two weeks. Then, the identity of SSCs was validated by anti-Plzf and anti-GFR-α1 antibodies via immunocytochemistry (ICC). The proliferation capacity of SSCs was evaluated by their culture on a layer of the decellularized testicular matrix (DTM) prepared from mouse testis, as well as two-dimensional (2D) with different mediums. After two weeks of the initiation of proliferation culture on 3D and 2D medium, the pre-meiotic at the mRNA and protein levels were evaluated via qRT-PCR and flow cytometry methods, respectively. The results showed that the proliferation rate of SSCs in 3D culture with 50 mM glutamic acid and 20 mM D-serine was significantly different from other groups after 14 days treatment. mRNA expression levels of promyelocytic leukemia zinc finger (Plzf) in 3D cultures supplemented by 20 mM D-serine and 50 mM glutamic acid were considerably higher than the 3D control group (p < 0.001). The flow cytometry analysis revealed that the amount of Plzf in the 2D-culture groups of SSCs with 20 mM MK-801 was considerably lower compared to the 2D-culture control group (p < 0.001).

CONCLUSIONS

This study indicated that decellularized testicular matrix supplemented with D-serine and glutamic acid could be considered a promising vehicle to support cells and provide an appropriate niche for the proliferation of SSCs.

Proliferation of human spermatogonial stem cells on optimized PCL/Gelatin nanofibrous scaffolds

Improvement of culture system and increasing the proliferation of spermatogonia stem cells under in vitro condition are the essential treatment options for infertility before autologous transplantation. Therefore, the present study aimed to evaluate the proliferation of human spermatogonia stem cells on the electrospun polycaprolactone/gelatin nanocomposite. Therefore, for this purpose, nanofiber porous scaffolds were prepared using the electrospinning method and their structures were then confirmed by SEM. After performing swelling, biodegradability and cell adhesion tests, human spermatogonia stem cells were cultured on scaffolds. In addition, both cell viability and proliferation were assessed using immunocytochemistry, flow cytometry and real-time PCR techniques in culturing during a 3-week period. SEM images indicated the presence of fibres with suitable diameters and arrangement as well as a sufficient porosity in nanocomposite scaffolds, showing good biocompatibility and biodegradability. The results show a significant increase in the number of spermatogonia stem cells in the cultured group on scaffold compared with the control group (p ≤ 0.05). As well, the results show that the expressions of integrin ɑ6 and β1 and Plzf genes estimated using real-time PCR in nanofiber scaffolds were significantly higher than those of the control group (p ≤ 0.05). However, the expression of c-Kit gene in the 3D group showed a significant decrease compared with the 2D group. Flow cytometry analysis also showed that the number of Plzf-positive cells was significantly higher in nanofiber porous scaffolds compared with the control group (p ≤ 0.05). Additionally, immunocytochemistry findings confirmed the presence of human spermatogonia stem cell colonies. In general, it seems that the designed nanocomposite scaffold could provide a suitable capacity for self-renewal of human spermatogonia stem cells, which can have a good application potential in research and reconstructive medicine related to the field of male infertility.

Long-Term Maintenance and Meiotic Entry of Early Germ Cells in Murine Testicular Organoids Functionalized by 3D Printed Scaffolds and Air-Medium Interface Cultivation

Short-term germ cell survival and central tissue degeneration limit organoid cultures. Here, testicular organoids (TOs) were generated from two different mouse strains in 3D printed one-layer scaffolds (1LS) at the air-medium interface displaying tubule-like structures and Leydig cell functionality supporting long-term survival and differentiation of germ cells to the meiotic phase. Chimeric TOs, consisting of a mixture of primary testicular cells and EGFP⁺ germline stem (GS) cells, were cultured in two-layer scaffolds (2LSs) for better entrapment. They showed an improved spheroidal morphology consisting of one intact tubule-like structure and surrounding interstitium, representing the functional unit of a testis. However, GS cells did not survive long-term culture. Consequently, further optimization of the culture medium is required to enhance the maintenance and differentiation of germ cells. The opportunities TOs offer to manipulate somatic and germ cells are essential for the study of male infertility and the search for potential therapies.

Research Progress, Challenges, and Breakthroughs of Organoids as Disease Models

Traditional cell lines and xenograft models have been widely recognized and used in research. As a new research model, organoids have made significant progress and development in the past 10 years. Compared with traditional models, organoids have more advantages and have been applied in cancer research, genetic diseases, infectious diseases, and regenerative medicine. This review presented the advantages and disadvantages of organoids in physiological development, pathological mechanism, drug screening, and organ transplantation. Further, this review summarized the current situation of vascularization, immune microenvironment, and hydrogel, which are the main influencing factors of organoids, and pointed out the future directions of development.

A review of methods for preserving male fertility

Male infertility is responsible for 50% of men's health problems and has always been a concern for personal and social issues. A survey of global statistics suggests an increase in infertility rate as one of the critical issues documented in studies. There are different ways of maintaining fertility in men, depending on their age. In this paper, we review the preservation methods used for fertility treatment in Iran and other countries. Available data were reviewed from Google Scholar, PubMed, Scopus, Web of Science, IranMedex, MEDLIB, IranDoc and Scientific Information Database and searched for articles published up to 2018, using the medical subject heading (MeSH) terms for cryopreservation, sperm, testicular, spermatogonia stem cell, male infertility and/or Iranian and in the world, to provide evidence from evaluation of fertility preservation the methods. Based the search strategy, 274 manuscripts were found. After reviewing the titles, abstracts and manuscripts in their entirety, 119 articles were obtained and selected according to the eligibility criteria. The 85 studies mentioned above were divided into three categories (sperm, testis, and spermatogonia stem cells (SSCs)), and methods of fertility preservation were investigated. Ways to maintain male fertility were different depending on age, and included sperm, testicular, and SSC freezing. The number of studies on testicular tissue and SSCs was low for human samples, and more studies are still needed. Sperm freezing at infertility centres is the top for male fertility preservation.

Decellularization of Male Reproductive Tissue

Decellularized testicular matrix (DTM) enables researchers to focus on the specific composition of the testicular extracellular matrix (ECM) and elucidate its role in spermatogenesis. Furthermore, it provides the natural architectural arrangement that could guide the reorganization of dissociated testicular cells in vitro. This is a key consideration as the presence of an authentic nutritive and endocrine support has been proven to be essential for in vitro spermatogenesis, at least in the mouse (Oliver and Stukenborg in Andrology 8:825-834, 2020; Richer et al. in Andrology 12741, 2019). Hence, scaffolds of DTM could be harnessed for the development of a human in vitro spermatogenesis culture system, which is a missing link in male fertility preservation and could be a possible treatment for nonobstructive azoospermia (Gassei and Orwig in Steril 105:256-266, 2016).

Generation of a Highly Biomimetic Organoid, Including Vasculature, Resembling the Native Immature Testis Tissue

The creation of a testis organoid (artificial testis tissue) with sufficient resemblance to the complex form and function of the innate testis remains challenging, especially using non-rodent donor cells. Here, we report the generation of an organoid culture system with striking biomimicry of the native immature testis tissue, including vasculature. Using piglet testis cells as starting material, we optimized conditions for the formation of cell spheroids, followed by long-term culture in an air–liquid interface system. Both fresh and frozen-thawed cells were fully capable of self-reassembly into stable testis organoids consisting of tubular and interstitial compartments, with all major cell types and structural details expected in normal testis tissue. Surprisingly, our organoids also developed vascular structures; a phenomenon that has not been reported in any other culture system. In addition, germ cells do not decline over time, and Leydig cells release testosterone, hence providing a robust, tunable system for diverse basic and applied applications.

Pediatric and Adolescent Oncofertility in Male Patients-From Alpha to Omega

This article reviews the latest information about preserving reproductive potential that can offer enhanced prospects for future conception in the pediatric male population with cancer, whose fertility is threatened because of the gonadotoxic effects of chemotherapy and radiation. An estimated 400,000 children and adolescents aged 0–19 years will be diagnosed with cancer each year. Fertility is compromised in one-third of adult male survivors of childhood cancer. We present the latest approaches and techniques for fertility preservation, starting with fertility preservation counselling, a clinical practice guideline used around the world and finishing with recent advances in basic science and translational research. Improving strategies for the maturation of germ cells in vitro combined with new molecular techniques for gene editing could be the next scientific keystone to eradicate genetic diseases such as cancer related mutations in the offspring of cancer survivors.

Optimization of decellularized human placental macroporous scaffolds for spermatogonial stem cells homing

Decellularized scaffolds have been found to be excellent platforms for tissue engineering applications. The attempts are still being made to optimize a decellularization protocol with successful removal of the cells with minimal damages to extracellular matrix components. We examined twelve decellularization procedures using different concentrations of Sodium dodecyl sulfate and Triton X-100 (alone or in combination), and incubation time points of 15 or 30 min. Then, the potential of the decellularized scaffold as a three-dimensional substrate for colony formation capacity of mouse spermatogonial stem cells was determined. The morphological, degradation, biocompatibility, and swelling properties of the samples were fully characterized. The 0.5%/30 SDS/Triton showed optimal decellularization with minimal negative effects on ECM (P ≤ 0.05). The swelling ratios increased with the increase of SDS and Triton concentration and incubation time. Only 0.5%/15 and 30 SDS showed a significant decrease in the SSCs viability compared with other groups (P < 0.05). The SSCs colony formation was clearly observed under SEM and H&E stained slides. The cells infiltrated into the subcutaneously implanted scaffold at days 7 and 30 post-implantation with no sign of graft rejection. Our data suggest the %0.5/30 SDS/Triton as an excellent platform for tissue engineering and reproductive biology applications.

Recent Advancements in Engineered Biomaterials for the Regeneration of Female Reproductive Organs

Various gynecologic diseases and chemoradiation or surgery for the management of gynecologic malignancies may damage the uterus and ovaries, leading to clinical problems such as infertility or early menopause. Embryo or oocyte cryopreservation-the standard method for fertility preservation-is not a feasible option for patients who require urgent treatment because the procedure requires ovarian stimulation for at least several days. Hormone replacement therapy (HRT) for patients diagnosed with premature menopause is contraindicated for patients with estrogen-dependent tumors or a history of thrombosis. Furthermore, these methods cannot restore the function of the uterus and ovaries. Although autologous transplantation of cryopreserved ovarian tissue is being attempted, it may re-introduce malignant cells after cancer treatment. With the recent development in regenerative medicine, research on engineered biomaterials for the restoration of female reproductive organs is being actively conducted. The use of engineered biomaterials is a promising option in the field of reproductive medicine because it can overcome the limitations of current therapies. Here, we review the ideal properties of biomaterials for reproductive tissue engineering and the recent advancements in engineered biomaterials for the regeneration of female reproductive organs.

Strategies for cryopreservation of testicular cells and tissues in cancer and genetic diseases

Cryopreservation of testicular cells and tissues is useful for the preservation and restoration of fertility in pre-pubertal males expecting gonadotoxic treatment for cancer and genetic diseases causing impaired spermatogenesis. A number of freezing and vitrification protocols have thus been tried and variable results have been reported in terms of cell viability spermatogenesis progression and the production of fertile spermatozoa. A few studies have also reported the production of live offspring from cryopreserved testicular stem cells and tissues in rodents but their replication in large animals and human have been lacking. Advancement in in vitro spermatogenesis system has improved the possibility of producing fertile spermatozoa from the cryopreserved testis and has reduced the dependency on transplantation. This review provides an update on various cryopreservation strategies for fertility preservation in males expecting gonadotoxic treatment. It also discusses various methods of assessing and ameliorating cryoinjuries. Newer developments on in vitro spermatogenesis and testicular tissue engineering for in vitro sperm production from cryopreserved SSCs and testicular tissue are also discussed.

Regulation of Cell Types Within Testicular Organoids

Organoids are 3-dimensional (3D) structures grown in vitro that emulate the cytoarchitecture and functions of true organs. Therefore, testicular organoids arise as an important model for research on male reproductive biology. These organoids can be generated from different sources of testicular cells, but most studies to date have used immature primary cells for this purpose. The complexity of the mammalian testicular cytoarchitecture and regulation poses a challenge for working with testicular organoids, because, ideally, these 3D models should mimic the organization observed in vivo. In this review, we explore the characteristics of the most important cell types present in the testicular organoid models reported to date and discuss how different factors influence the regulation of these cells inside the organoids and their outcomes. Factors such as the developmental or maturational stage of the Sertoli cells, for example, influence organoid generation and structure, which affect the use of these 3D models for research. Spermatogonial stem cells have been a focus recently, especially in regard to male fertility preservation. The regulation of the spermatogonial stem cell niche inside testicular organoids is discussed in the present review, as this research area may be positively affected by recent progress in organoid generation and tissue engineering. Therefore, the testicular organoid approach is a very promising model for male reproductive biology research, but more studies and improvements are necessary to achieve its full potential.

Current progress, challenges, and future prospects of testis organoids†

Spermatogenic failure is believed to be a major cause of male infertility. The establishment of a testis organoid model would facilitate the study of such pathological mechanisms and open the possibility of male fertility preservation. Because of the complex structures and cellular events occurring within the testis, the establishment of a compartmentalized testis organoid with a complete spermatogenic cycle remains a challenge in all species. Since the late 20th century, a great variety of scaffold-based and scaffold-free testis cell culture systems have been established to recapitulate de novo testis organogenesis and in vitro spermatogenesis. The utilization of the hydrogel scaffolds provides a 3D microenvironment for testis cell growth and development, facilitating the reconstruction of de novo testis tissue-like structures and spermatogenic differentiation. Using a combination of different strategies, including the use of various scaffolding biomaterials, the incorporation of the living cells with high self-assembling capacity, and the integration of the advanced fabrication techniques, a scaffold-based testis organoid with a compartmentalized structure that supports in vitro spermatogenesis may be achieved. This article briefly reviews the current progress in the development of scaffold-based testis organoids while focusing on the scaffolding biomaterials (hydrogels), cell sources, and scaffolding approaches. Key challenges in current organoid studies are also discussed along with recommendations for future research.

Advanced bioengineering of male germ stem cells to preserve fertility

In modern life, several factors such as genetics, exposure to toxins, and aging have resulted in significant levels of male infertility, estimated to be approximately 18% worldwide. In response, substantial progress has been made to improve in vitro fertilization treatments (e.g. microsurgical testicular sperm extraction (m-TESE), intra-cytoplasmic sperm injection (ICSI), and round spermatid injection (ROSI)). Mimicking the structure of testicular natural extracellular matrices (ECM) outside of the body is one clear route toward complete in vitro spermatogenesis and male fertility preservation. Here, a new wave of technological innovations is underway applying regenerative medicine strategies to cell-tissue culture on natural or synthetic scaffolds supplemented with bioactive factors. The emergence of advanced bioengineered systems suggests new hope for male fertility preservation through development of functional male germ cells. To date, few studies aimed at in vitro spermatogenesis have resulted in relevant numbers of mature gametes. However, a substantial body of knowledge on conditions that are required to maintain and mature male germ cells in vitro is now in place. This review focuses on advanced bioengineering methods such as microfluidic systems, bio-fabricated scaffolds, and 3D organ culture applied to the germline for fertility preservation through in vitro spermatogenesis.

Artificial testis: a testicular tissue extracellular matrix as a potential bio-ink for 3D printing

A summary of the study design showing the extraction of extracellular matrix of testicular tissue and the printing of hydrogel scaffolds and the interaction of testicular cells on three-dimensional scaffolds.

Gelatin Electrospun Mat as a Potential Co-culture System for In Vitro Production of Sperm Cells from Embryonic Stem Cells

Engineering of 3D substrates with maximum similarity to seminiferous tubules would help to produce functional sperm cells in vitro from stem cells. Here, we present a 3D electrospun gelatin (EG) substrate seeded with Sertoli cells and determine its potential for guided differentiation of embryonic stem cells (ESCs) toward germline cells. The EG was fabricated by electrospinning, and its morphology under SEM, as well as cytobiocompatibility for Sertoli cells and ESCs, was confirmed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and cell attachment assay. Embryoid bodies (EBs) were formed from ESCs and co-cultured with Sertoli cells, induced with BMP4 for 3 and 7 consecutive days to induce the differentiation of EBs toward germline cells. The differentiation was investigated by immunocytochemistry (ICC), flow cytometry, and RT-PCR in four experimental groups of EBs (EBs cultured in gelatin-coated cell culture plates); Scaffold/EB (EBs cultured on EG); ESCs/Ser (EBs and Sertoli cells co-cultured on gelatin-coated cell culture plates without EG); and Scaffold/EB/Ser (EBs and Sertoli cells co-cultured on EG). All experimental groups exhibited a significantly increased MVH (germline-specific marker) and decreased c-KIT (stemness marker) expression when compared with the EB group. ICC and flow cytometry revealed that Scaffold/EB/Ser had the highest level of MVH and the lowest c-KIT expression at both 3 and 7 days postdifferentiation compared with other groups. RT-PCR results showed a significant increase in the germline marker (Dazl) and a significant decrease in the ESC stemness marker (Nanog) in Scaffold/EB compared to the EB group. The germline markers Gcna, Stella, Mvh, Stra8, Piwil2, and Dazl were significantly increased in Scaffold/EB/Ser compared to the Scaffold/EB group. Our findings revealed that the EG scaffold can provide an excellent substrate biomimicking the micro/nanostructure of native seminiferous tubules and a platform for Sertoli cell-EB communication required for growth and differentiation of ESCs into germline cells.

Decellularised whole ovine testis as a potential bio-scaffold for tissue engineering

The aim of this study was to determine an efficient whole-organ decellularisation protocol of a human-sized testis by perfusion through the testicular arteries. In the first step of this study, we determined the most efficient detergent agent, whereas the second phase delineated the optimal time required for the decellularisation process. Initially sheep testes were decellularised by one of three different detergent agents: sodium dodecyl sulphate (SDS), Triton X-100 and trypsin-ethylenediamine tetraacetic acid (EDTA) solutions, each perfused for 6h. In the second phase, the selected detergent agent was applied for different time periods. A total number of 20 organs were processed during this investigation. The efficacy of the decellularisation process and the preservation of the extracellular matrix components and structure were evaluated by histopathological examinations, 4',6'-diamidino-2-phenylindole (DAPI) staining, DNA quantification, hydroxyproline measurement, magnetic resonance imaging and scanning electron microscopy. Organ perfusion with 1% SDS solution for 6 to 8h demonstrated the most desirable outcomes regarding decellularisation and extracellular matrix preservation. The 3-[4, 5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay was used to determine the toxicity of the scaffold and its potential for further application in tissue-engineering investigations. This investigation introduces an efficient method to produce a three-dimensional testicular bio-scaffold resembling the properties of the native organ that could be employed in tissue-engineering studies.

Approaches and Technologies in Male Fertility Preservation

Male fertility preservation is required when treatment with an aggressive chemo-/-radiotherapy, which may lead to irreversible sterility. Due to new and efficient protocols of cancer treatments, surviving rates are more than 80%. Thus, these patients are looking forward to family life and fathering their own biological children after treatments. Whereas adult men can cryopreserve their sperm for future use in assistance reproductive technologies (ART), this is not an option in prepubertal boys who cannot produce sperm at this age. In this review, we summarize the different technologies for male fertility preservation with emphasize on prepubertal, which have already been examined and/or demonstrated in vivo and/or in vitro using animal models and, in some cases, using human tissues. We discuss the limitation of these technologies for use in human fertility preservation. This update review can assist physicians and patients who are scheduled for aggressive chemo-/radiotherapy, specifically prepubertal males and their parents who need to know about the risks of the treatment on their future fertility and the possible present option of fertility preservation.

Testicular organoid formation is a property of immature somatic cells, which self-assemble and exhibit long-term hormone-responsive endocrine function

Testicular organoid models are tools to study testicular physiology, development, and spermatogenesis in vitro. However, few side-by-side comparisons of organoid generation method have been evaluated. Here, we directly tested whether the culture microenvironment is the prime determinant promoting testicular organoid self-assembly. Using Matrigel as a representative extracellular matrix (ECM), we compared multiple culture environments, 2D and 3D, ECM-free and ECM, for organoid self-assembly with immature murine testicular cells. De novo tissues were observed to self-assemble in all four culture environments tested within 72 h, however, these tissues only met requirements to be named organoids in 2D ECM and 3D ECM-free (3DF) culture methods. Based on these results, 3DF was selected for further study, and used to examine animal age as an independent variable. Organoid assembly was significantly delayed when using pubertal murine cells and entirely absent from adult murine and adult human cells. Organoid-conditioned medium and medium supplemented with 1% Matrigel did not improve organoid assembly in pubertal murine cells, but immature murine cells rescued the assembly of adult murine cells when cultured together as age-chimeric cell mixtures. In murine organoids cultured for 14 d, tubule-like structures exhibiting a highly biomimetic architecture were characterized, including some rare germ and spermatogonial stem cells. These structural organoids secreted high levels of testosterone and inhibin B over 12 weeks with preserved responsivity to gonadotropins. Collectively these studies, in which cellular self-assembly and organoid formation was achieved independent of the culture microenvironment, suggest that self-assembly is an innate property of immature testicular cells independent from, but capable of being promoted by, the culture environment. This study provides a template for studying testicular organoid self-assembly and endocrine function, and a platform for improving the engineering of functional testicular tissues.

The Anti-Tumor Effect of Nab-Paclitaxel Proven by Patient-Derived Organoids

Background

Nab-paclitaxel has been widely used in treating breast cancer and pancreatic patients for its low toxicity and high efficiency. However, its role in gastric cancer (GC) remains ambiguous. The aim of our study was to test the anti-tumor activity of nab-paclitaxel using GC patient-derived organoids.

Methods

By using the organoid culture system, we describe the establishment of human gastric cancer organoid lines from surgical samples of three patients with gastric cancer. The consistency of these organoids with original cancer tissues was evaluated by histopathological examination. The characteristics of the cancer organoids were tested using immunofluorescence (IF) staining. Using organoids, the anti-tumor efficiencies of nab-paclitaxel, 5-Fu and epirubicin were compared by CCK8 assay and Annexin V-FITC/PI staining.

Results

Three organoids were successfully established and passaged. The morphology of the established GC organoids was consistent with original cancer tissues. The IC50 of nab-paclitaxel was 3.68 μmol/L in hGCO1, 2.41 μmol/L in hGCO2 and 2.91 μmol/L in hGCO3, which was significantly lower than those of 5-FU (72.99 μmol/L in hGCO1, 28.32 μmol/L in hGCO2 and 2.91 μmol/L in hGCO3) and epirubicin (25.85μmol/L in hGCO1, 15.15 μmol/L in hGCO2 and 7.60 μmol/L in hGCO3). When each organoid lines were treated with nab-paclitaxel for increasing period of time, the percentage of the apoptotic cells in each organoid increased accordingly.

Conclusion

Nab-paclitaxel showed strong anti-tumor activity and had the potential to become front-line drug for treating GC patients. Gastric cancer organoid may be a good tool to predict in vivo response to drugs.

Effects of Different Biomaterials and Cellular Status on Testicular Cell Self-Organization

A multicellular organism's development is coupled with cellular self-organization, which is regulated by cell-cell interactions and cell-extracellular matrix (ECM) crosstalk. Testicular cells from different species such as mouse, rat, and porcine can self-organize into seminiferous tubules both in vitro and in vivo, but the understanding of the functional role of the ECM during this process is limited. Here, it is shown that mouse testicular cells encapsulated with the biomaterial Matrigel can self-organize into seminiferous tubules with blood-testis barrier (BTB) formation and Leydig cell differentiation. By varying the encapsulation method, a combination of sodium alginate and collagen is used to promote reorganization of seminiferous tubules, which resemble those in vivo. In addition, the self-organization ability of testicular cells declines with advanced cell age, and those germ cells play a pivotal role in this process. These findings will be helpful to understand the self-organization process of testicular cells and provide insights for the reconstruction of testes.

A Testis-Derived Hydrogel as an Efficient Feeder-Free Culture Platform to Promote Mouse Spermatogonial Stem Cell Proliferation and Differentiation

Fertility preservation and assisted reproductive medicine require effective culture systems for the successful proliferation and differentiation of spermatogonial stem cells (SSCs). Many SSC culture systems require the addition of feeder cells at each subculture, which is tedious and inefficient. Here, we prepared decellularized testicular matrix (DTM) from testicular tissue, which preserved essential structural proteins of testis. The DTM was then solubilized and induced to form a porous hydrogel scaffold with randomly oriented fibrillar structures that exhibited good cytocompatibility. The viability of SSCs inoculated onto DTM hydrogel scaffolds was significantly higher than those inoculated on Matrigel or laminin, and intracellular gene expression and DNA imprinting patterns were similar to that of native SSCs. Additionally, DTM promoted SSC differentiation into round spermatids. More importantly, the DTM hydrogel supported SSC proliferation and differentiation without requiring additional somatic cells. The DTM hydrogel scaffold culture system provided an alternative and simple method for culturing SSCs that eliminates potential variability and contamination caused by feeder cells. It might be a valuable tool for reproductive medicine.

Engineered reproductive tissues

Engineered male and female biomimetic reproductive tissues are being developed as autonomous in vitro units or as integrated multi-organ in vitro systems to support germ cell and embryo function, and to display characteristic endocrine phenotypic patterns, such as the 28-day human ovulatory cycle. In this Review, we summarize how engineered reproductive tissues facilitate research in reproductive biology, and overview strategies for making engineered reproductive tissues that might eventually allow the restoration of reproductive capacity in patients.

Novel therapeutic approaches of tissue engineering in male infertility

Male reproductive organ plays an important role in sperm production, maintenance and entry to the female reproductive tract, as well as generation and secretion of male sex hormones responsible for the health of male reproductive system. The purpose of this paper is to discuss the experimental and clinical evidence on the utilization of tissue engineering techniques in treating male infertility. Tissue engineering (TE) and regenerative medicine have developed new approaches to treat patients with reproductive disorders such as iatrogenic injuries, congenital abnormalities, and trauma. In some cases, including congenital defects and undescended testis or hypogonadism, the sperm samples are not retrieved. This makes TE a possible future strategy for restoration of male fertility. Here, we have summarized the recent advances in experimental and clinical application of cell-, tissue-, and organ-based regenerative medicine in male reproductive disorders.

In-vitro spermatogenesis through testis modelling: Toward the generation of testicular organoids

Background

The testicular organoid concept has recently been introduced in tissue engineering to refer to testicular cell organizations modeling testicular architecture and function. The testicular organoid approach gives control over which and how cells reaggregate, which is not possible in organotypic cultures, thereby extending the applicability of in‐vitro spermatogenesis (IVS) systems. However, it remains unclear which culture method and medium allow reassociation of testicular cells into a functional testicular surrogate in‐vitro.

Objective

The aim of this paper is to review the different strategies that have been used in an attempt to create testicular organoids and generate spermatozoa. We want to provide an up‐to‐date list on culture methodologies and media compositions that have been used and determine their role in regulating tubulogenesis and differentiation of testicular cells.

Search method

A literature search was conducted in PubMed, Web of Science, and Scopus to select studies reporting the reorganization of testicular cell suspensions in‐vitro, using the keywords: three‐dimensional culture, in‐vitro spermatogenesis, testicular organoid, testicular scaffold, and tubulogenesis. Papers published before the August 1, 2019, were selected.

Outcome

Only a limited number of studies have concentrated on recreating the testicular architecture in‐vitro. While some advances have been made in the testicular organoid research in terms of cellular reorganization, none of the described culture systems is adequate for the reproduction of both the testicular architecture and IVS.

Conclusion

Further improvements in culture methodology and medium composition have to be made before being able to provide both testicular tubulogenesis and spermatogenesis in‐vitro.

Organoid technology in cancer precision medicine

Organoid technology has been remarkably improved over the last decade. Various organoids have been derived from different types of tissues and recapitulate their organ-specific gene expression signatures, particular tissue spatial structures and functions of their original tissue. The patient-derived organoids (PDOs) have been used to elucidate crucial scientific questions, including the relationships between genetic/epigenetic alterations and drug responses, cell plasticity during disease progressions, and mechanisms of drug resistances. With the great expectations, PDOs will be widely used to facilitate the personalized medical decisions, which have the potential to profoundly improve patient outcomes. In this review, we will discuss the developmental details, current achievements, applications and challenges of organoid technology in precision cancer medicine.