Carbon dioxide adsorption to UiO-66: theoretical analysis of binding energy and NMR properties

UiO-66 is one of the most valuable metal-organic frameworks because of its excellent adsorption capability for gas molecules and its high stability towards water. Herein we investigated adsorption of carbon dioxide (CO2), acetone, and methanol to infinite UiO-66 using DFT calculations on an infinite system under periodic-boundary conditions and post-Hartree-Fock (SCS-MP2 and MP2.5) calculations on cluster models. Three to four molecules are adsorbed at each of four μ-OH groups bridging three Zr atoms in one unit cell (named Site I). Six molecules are adsorbed around three pillar ligands, where the molecule is loosely surrounded by three terephthalate ligands (named Site II). Also, six molecules are adsorbed around the pillar ligand in a different manner from that at Site II, where the molecule is surrounded by three terephthalate ligands (named Site III). Totally fifteen to sixteen CO2 molecules are adsorbed into one unit cell of UiO-66. The binding energy (BE) decreases in the order Site I > Site III > Site II for all three molecules studied here and in the order acetone > methanol ≫ CO2 in the three adsorption sites. At the site I, the protonic H atom of the μ-OH group interacts strongly with the negatively charged O atom of CO2, acetone and methanol, which is the origin of the largest BE value at this site. Although the DFT calculations present these decreasing orders of BE values correctly, the correction by post-Hartree-Fock calculations is not negligibly small and must be added for obtaining better BE values. We explored NMR spectra of UiO-66 with adsorbed CO2 molecules and found that the isotropic shielding constants of the 1H atom significantly differ among no CO2, one CO2 (at Sites I, II, or III), and fifteen CO2 adsorption cases (Sites I to III) but the isotropic 17O and 13C shielding constants change moderately by adsorption of fifteen CO2 molecules. Thus, 1H NMR measurement is a useful experiment for investigating CO2 adsorption.

Hydrogen Adsorption in Ultramicroporous Metal-Organic Frameworks Featuring Silent Open Metal Sites

In this study, we utilized an ultramicroporous metal-organic framework (MOF) named [Ni3(pzdc)2(ade)2(H2O)4]·2.18H2O (where H3pzdc represents pyrazole-3,5-dicarboxylic acid and ade represents adenine) for hydrogen (H2) adsorption. Upon activation, [Ni3(pzdc)2(ade)2] was obtained, and in situ carbon monoxide loading by transmission infrared spectroscopy revealed the generation of open Ni(II) sites. The MOF displayed a Brunauer-Emmett-Teller (BET) surface area of 160 m2/g and a pore size of 0.67 nm. Hydrogen adsorption measurements conducted on this MOF at 77 K showed a steep increase in uptake (up to 1.93 mmol/g at 0.04 bar) at low pressure, reaching a H2 uptake saturation at 2.11 mmol/g at ∼0.15 bar. The affinity of this MOF for H2 was determined to be 9.7 ± 1.0 kJ/mol. In situ H2 loading experiments supported by molecular simulations confirmed that H2 does not bind to the open Ni(II) sites of [Ni3(pzdc)2(ade)2], and the high affinity of the MOF for H2 is attributed to the interplay of pore size, shape, and functionality.

One-step ethylene purification from ternary mixtures by an ultramicroporous material with synergistic binding centers

Developing advanced porous materials with industrial potential to separate multicomponent gas mixtures that are structurally similar is a crucial but challenging task. Here, we report the efficient one-step separation of ethylene (C2H4) from acetylene (C2H2) and carbon dioxide (CO2) using an ultramicroporous metal-organic framework UTSA-16. The synergistic effect of the polarized carboxyl groups and coordinated water molecules in its pore channel enables the material to have high uptakes for C2H2 and CO2 due to electrostatic potential matching, as well as excellent separation selectivity against C2H4. Breakthrough experiments suggest that UTSA-16 can efficiently separate 99.9% pure C2H4 from ternary mixtures with a high productivity of 403 L kg-1. Moreover, the preparation cost of UTSA-16 is significantly lower than other related adsorbents by 40-2000 times, indicating its unique potential for industrial applications.

Ultra-Microporous and Stable MOFs with Zero-Linker Ligands for Gas Capture and Separation

Zero-linker ligands have maximized the size coordination efficiency of the metal ions in MOF framework which is important in constructing ultra-microporous MOFs with high stability and density, a bridge between zeolites and traditional MOFs. This article highlighted several recently developed ultra-microporous MOFs with zero-linker ligands for gas capture and separation.

A Robust Squarate-Cobalt Metal-Organic Framework for CO2/N2 Separation

The separation of CO₂ from the industrial post-combustion flue gas is of great importance to reduce the increasingly serious greenhouse effect, yet highly challenging due to the extremely high stability, low cost, and high separation performance requirements for adsorbents under the practical operating conditions. Herein, we report a robust squarate-cobalt metal-organic framework (MOF), FJUT-3, featuring an ultra-small 1D square channel decorated with -OH groups, for CO₂/N₂ separation. Remarkably, FJUT-3 not only has excellent stability under harsh chemical conditions but also presents low-cost property for scale-up synthesis. Moreover, FJUT-3 shows excellent CO₂ separation performance under various humid and temperature conditions confirmed by the transient breakthrough experiments, thus enabling FJUT-3 with adequate potentials for industrial CO₂ capture and removal. The distinct CO₂ adsorption mechanism is well elucidated by theoretical calculations, in which the hierarchical C···O_CO2, C-O···C_CO2, and O-H···O_CO2 interactions play a vital synergistic role in the selective CO₂ adsorption process.

Ultramicroporous iron-isonicotinate MOFs combining size-exclusion kinetics and thermodynamics for efficient CO2/N2 gas separation

Two ultramicroporous 2D and 3D iron-based Metal-Organic Frameworks (MOFs) have been obtained by solvothermal synthesis using different ratios and concentrations of precursors. Their reduced pore space decorated with pendant pyridine from tangling isonicotinic ligands enables the combination of size-exclusion kinetic gas separation, due to their small pores, with thermodynamic separation, resulting from the interaction of the linker with CO₂ molecules. This combined separation results in efficient materials for dynamic breakthrough gas separation with virtually infinite CO₂/N₂ selectivity in a wide operando range and with complete renewability at room temperature and ambient pressure.

An Amine-Functionalized Ultramicroporous Metal-Organic Framework for Postcombustion CO2 Capture

Among the most promising methods by which to capture CO₂ from flue gas, the emission of which has accelerated global warming, is energy-efficient physisorption using metal-organic framework (MOF) adsorbents. Here, we present a novel cuprous-based ultramicroporous MOF, Cu(adci)-2 (adci^- = 2-amino-4,5-dicyanoimidazolate), which was rationally synthesized by combining two strategies to design MOF physisorbents for enhanced CO₂ capturing, i.e., aromatic amine functionalization and the introduction of ultramicroporosity (pore size <7 Å). Synchrotron powder X-ray diffraction and a Rietveld analysis reveal that the Cu(adci)-2 structure has one-dimensional square-shaped channels, in each of which all affiliated ligands, specifically NH₂ groups at the 2-position of the imidazolate ring, have the same orientation, with a pair of NH₂ groups therefore facing each other on opposite sides of the channel walls. While Cu(adci)-2 exhibits a high CO₂ adsorption capacity (2.01 mmol g^-1 at 298 K and 15 kPa) but a low zero-coverage isosteric heat of adsorption (27.5 kJ mol^-1), breakthrough experiments under dry and 60% relative humidity conditions show that its CO₂ capture ability is retained even in the presence of high amounts of moisture. In a Monte Carlo simulation and a radial distribution analysis, the preferential CO₂ binding site of Cu(adci)-2 was predicted to be between two ligands, forming a sandwich-like structure and implying that its CO₂ adsorption properties originate from the enhancement of Lewis base-acid and London dispersion interactions due to the amino groups and ultramicroporosity, respectively.

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues

The novel Zr^IV-based perfluorinated metal-organic framework (PF-MOF) [Zr₆O₄(OH)₄(TFS)₆] (ZrTFS) was prepared under solvent-free conditions using the commercially available tetrafluorosuccinic acid (H₂TFS) as a bridging ditopic linker. Since H₂TFS can be seen as the fully aliphatic and perfluorinated C₄ analogue of fumaric acid, ZrTFS was found to be isoreticular to zirconium fumarate (MOF-801). The structure of ZrTFS was solved and refined from X-ray powder diffraction data. Despite this analogy, the gas adsorption capacity of ZrTFS is much lower than that of MOF-801; in the former, the presence of bulky fluorine atoms causes a considerable window size reduction. To have PF-MOFs with more accessible porosity, postsynthetic exchange (PSE) reactions on (defective) MOF-801 suspended in H₂TFS aqueous solutions were carried out. Despite the different H₂TFS concentrations used in the PSE process, the exchanges yielded two mixed-linker materials of similar minimal formulae [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_2.08(H₂O)_2.08(FUM)_4.04(HTFS)_1.84] (PF-MOF1) and [Zr₆O₄(μ₃-OH)₄(μ₁-OH)_1.83(H₂O)_1.83(FUM)_4.04(HTFS)_2.09] (PF-MOF2) (FUM^2- = fumarate), where the perfluorinated linker was found to fully replace the capping acetate in the defective sites of pristine MOF-801. CO₂ and N₂ adsorption isotherms collected on all samples reveal that both CO₂ thermodynamic affinity (isosteric heat of adsorption at zero coverage, Q_st) and CO₂/N₂ adsorption selectivity increase with the amount of incorporated TFS^2-, reaching the maximum values of 30 kJ mol^-1 and 41 (IAST), respectively, in PF-MOF2. This confirms the beneficial effect coming from the introduction of fluorinated linkers in MOFs on their CO₂ adsorption ability. Finally, solid-state density functional theory calculations were carried out to cast light on the structural features and on the thermodynamics of CO₂ adsorption in MOF-801 and ZrTFS. Due to the difficulties in modeling a defective MOF, an intermediate structure containing both linkers in the framework was also designed. In this structure, the preferential CO₂ adsorption site is the tetrahedral pore in the "UiO-66-like" structure. The extra energy stabilization stems from a hydrogen bond interaction between CO₂ and a hydroxyl group on the inorganic cluster.

Acetylenedicarboxylate as a linker in the engineering of coordination polymers and metal-organic frameworks: challenges and potential

Despite its simplicity as a short and rod-like linear linker, acetylenedicarboxylate (ADC) has for a long time been somewhat overlooked in the engineering of coordination polymers (CPs) and especially in the construction of porous metal-organic frameworks (MOFs). This situation seems to be stemming from the thermosensitivity of the free acid (H₂ADC) precursor and its dicarboxylate, which makes the synthesis of their CP- and MOF-derivatives, as well as the evacuation of guest molecules from their pores, challenging. However, an increasing number of publications dealing with the synthesis, structural characterization and properties of ADC-based CPs and MOFs, disclose ways to tackle this obstacle. In this regard, using mostly room temperature solution synthesis or mechanochemical synthesis, and very rarely solvothermal synthesis, the ADC linker has successfully been used to form one-, two-, and three-dimensional CPs with metal cations from almost all groups of the periodic table of the elements, whereby its carboxylate groups adopt mainly all types of known coordination modes. ADC-based CPs feature properties, including negative thermal expansion, formation of non-centrosymmetric networks, long-range magnetic ordering, and solid-state polymerization. The first ADC-based microporous MOFs were obtained with Ce(IV), Hf(IV) and Zr(IV), in which the presence of the -CC- triple-bond within their backbone results in high hydrophilicity, high CO₂ adsorption capacity and enthalpy, as well as the uptake of halogen vapors. This discloses the potential of ADC-MOFs for gas storage/separation and water adsorption-based applications. Furthermore, H₂ADC/ADC was discovered to undergo facile in situ hydrohalogenation to yield halogen-functionalized fumarate-based CPs/MOFs. This review surveys investigations on ADC-based coordination polymers and metal-organic frameworks, and is intended to stimulate interest on this linker in chemists working in the fields of crystal chemistry or materials science.

High-Performance Selective CO2 Capture on a Stable and Flexible Metal-Organic Framework via Discriminatory Gate-Opening Effect

Selective CO₂ capture is of great significance for environmental protection and industrial demand. Here, we report a stable and flexible metal-organic framework (MOF) with excellent water/moisture stability, namely, ZnDatzBdc, that enables high-performance selective CO₂ capture from N₂ and CH₄ via a discriminatory gate-opening effect. ZnDatzBdc shows reversible structural transformation between the open-phase (OP) state and the close-phase (CP) state, owing to the synergistic effect of breakage/re-formation of intraframework hydrogen bonds and the rotation of the phenyl rings. Significantly, ZnDatzBdc exhibits S-shaped isotherms toward CO₂, resulting in a large CO₂ theoretical working capacity of 94.9 cm³/cm³ under typical pressure vacuum swing adsorption (PVSA) operations, which outperforms other flexible MOFs showing the CO₂ selective gate-opening effect except for the miosture-sensitive ELM-11. In addition, CO₂ uptake of ZnDatzBdc is well maintained upon multiple water/moisture exposure, indicating its excellent stability. Moreover, ZnDatzBdc establishes remarkable CO₂ selectivity with ultrahigh uptake ratios of CO₂/N₂ (107 at 273 K and 129 at 298 K) and CO₂/CH₄ (35 at 273 K and 44 at 298 K) at 100 kPa. The in situ gas sorption PXRD experiment verifies that the gate-opening effect takes place in the atmospheric environment of CO₂ but not for N₂ or CH₄. Molecular simulation suggests the selective gate-opening of CO₂ comes from its strong electrostatic interactions with the amino groups. Furthermore, effective breakthrough performance and easy regeneration are further confirmed. Hence, combined with excellent separation performance and remarkable stability, ZnDatzBdc can serve as a potential industrial adsorbent for selective CO₂ capture.

Inorganic Pillar Center-Facilitated Counterdiffusion Synthesis for Highly H2 Perm-Selective KAUST-7 Membranes

Fluorinated metal-organic framework materials (NbOFFIVE-1-Ni, also referred to as KAUST-7) have attracted widespread attention because of their high chemical stability and thermal stability, outstanding tolerance with water and H₂S, and high CO₂-adsorption selectivity over H₂ and CH₄. KAUST-7 was expected to be a new membrane material candidate for H₂/CO₂ separation because of the hindered permeation of CO₂ resulting from the interaction between CO₂ and (NbOF₅)^2- of the KAUST-7 framework. A highly H₂ perm-selective KAUST-7 membrane was first achieved using a novel strategy of inorganic pillar center-facilitated counterdiffusion (IPCFCD) proposed by us. The IPCFCD method not only effectively avoided the corrosion of hydrofluoric acid to α-Al₂O₃ tubes in the process of preparing KAUST-7 membranes, but also better reduced grain boundary defects because of the faster nucleation rate and resultant high crystallinity. The KAUST-7 membrane exhibited a high H₂/CO₂ separation factor (SF) of 27.30 for the 1:1 H₂/CO₂ binary gas mixture with a high H₂ permeance of 5.30 × 10^-7 mol m^-2 s^-1 Pa^-1 under ambient conditions and a slight decrease of the H₂/CO₂ SF with increasing operation temperature and presence of steam. This study highlighted the importance of pre-synthesizing inorganic pillar centers (NiNbOF₅ intermediate) and the innovation of a membrane formation process for synthesizing polycrystalline KAUST-7 membranes. Most important of all, our study provided a novel approach to overcome the challenge in fabricating metal-organic framework membranes containing corrosive reactants for the corresponding supports.

Identifying UiO-67 Metal-Organic Framework Defects and Binding Sites through Ammonia Adsorption

Ammonia is a widely used toxic industrial chemical that can cause severe respiratory ailments. Therefore, understanding and developing materials for its efficient capture and controlled release is necessary. One such class of materials is 3D porous metal-organic frameworks (MOFs) with exceptional surface areas and robust structures, ideal for gas storage/transport applications. Herein, interactions between ammonia and UiO-67-X (X: H, NH₂ , CH₃ ) zirconium MOFs were studied under cryogenic, ultrahigh vacuum (UHV) conditions using temperature-programmed desorption mass spectrometry (TPD-MS) and in-situ temperature-programmed infrared (TP-IR) spectroscopy. Ammonia was observed to interact with μ₃ -OH groups present on the secondary building unit of UiO-67-X MOFs via hydrogen bonding. TP-IR studies revealed that under cryogenic UHV conditions, UiO-67-X MOFs are stable towards ammonia sorption. Interestingly, an increase in the intensity of the C-H stretching mode of the MOF linkers was detected upon ammonia exposure, attributed to NH-π interactions with linkers. These same binding interactions were observed in grand canonical Monte Carlo simulations. Based on TPD-MS, binding strength of ammonia to three MOFs was determined to be approximately 60 kJ mol^-1 , suggesting physisorption of ammonia to UiO-67-X. In addition, missing linker defect sites, consisting of H₂ O coordinated to Zr⁴⁺ sites, were detected through the formation of nNH₃ ⋅H₂ O clusters, characterized through in-situ IR spectroscopy. Structures consistent with these assignments were identified through density functional theory calculations. Tracking these bands through adsorption on thermally activated MOFs gave insight into the dehydroxylation process of UiO-67 MOFs. This highlights an advantage of using NH₃ for the structural analysis of MOFs and developing an understanding of interactions between ammonia and UiO-67-X zirconium MOFs, while also providing directions for the development of stable materials for efficient toxic gas sorption.

Coordination flexibility aided CO2-specific gating in an Iron Isonicotinate MOF

Coordination flexibility assisted porosity has been introduced into an Iron-isonicotinate metal organic framework (MOF), (Fe(4-PyC) 2 .(OH). The framework showed CO 2 -specific gate opening behavior, which gets tuned as a function of temperature and pressure. The MOF's physisorptive porosity towards CO 2 , CH 4 , and N 2 was investigated; it adsorbed only CO 2 via a gate opening phenomenon. The isonicotinate, representing a borderline soft base, is bound to the hard Fe 3+ centre through monodentate carboxylate and pyridyl nitrogen. This moderately weak binding enables isonicotinate to spin like a spindle under the CO 2 pressure opening the gate for a sharp increase in CO 2 uptake at 333 mmHg (At 298K, the CO 2 uptake increases from 0.70 to 1.57 mmol/g). We investigated the MOF's potential for CO 2 /N 2 and CO 2 /CH 4 gas separation aided by this gating. IAST model reveals that the CO 2 /N 2 selectivity jumps from 325 to 3131 when the gate opens, while the CO 2 /CH 4 selectivity increases three times. Interestingly, this Fe-isonicotinate MOF did not follow the trend set by our earlier reported Hard-Soft Gate Control (established for isostructural M 2+ -isonicotinate MOFs (M = Mg, Mn)). However, we account for this discrepancy using the different oxidation state of metals confirmed by X-ray photoelectron spectroscopy and magnetism.

Understanding the Effect of Water on CO2 Adsorption

Carbon capture from large sources and ambient air is one of the most promising strategies to curb the deleterious effect of greenhouse gases. Among different technologies, CO₂ adsorption has drawn widespread attention mostly because of its low energy requirements. Considering that water vapor is a ubiquitous component in air and almost all CO₂-rich industrial gas streams, understanding its impact on CO₂ adsorption is of critical importance. Owing to the large diversity of adsorbents, water plays many different roles from a severe inhibitor of CO₂ adsorption to an excellent promoter. Water may also increase the rate of CO₂ capture or have the opposite effect. In the presence of amine-containing adsorbents, water is even necessary for their long-term stability. The current contribution is a comprehensive review of the effects of water whether in the gas feed or as adsorbent moisture on CO₂ adsorption. For convenience, we discuss the effect of water vapor on CO₂ adsorption over four broadly defined groups of materials separately, namely (i) physical adsorbents, including carbons, zeolites and MOFs, (ii) amine-functionalized adsorbents, and (iii) reactive adsorbents, including metal carbonates and oxides. For each category, the effects of humidity level on CO₂ uptake, selectivity, and adsorption kinetics under different operational conditions are discussed. Whenever possible, findings from different sources are compared, paying particular attention to both similarities and inconsistencies. For completeness, the effect of water on membrane CO₂ separation is also discussed, albeit briefly.

A window-space-directed assembly strategy for the construction of supertetrahedron-based zeolitic mesoporous metal-organic frameworks with ultramicroporous apertures for selective gas adsorption

Despite their scarcity due to synthetic challenges, supertetrahedron-based metal-organic frameworks (MOFs) possess intriguing architectures, diverse functionalities, and superb properties that make them in-demand materials. Employing a new window-space-directed assembly strategy, a family of mesoporous zeolitic MOFs have been constructed herein from corner-shared supertetrahedra based on homometallic or heterometallic trimers [M3(OH/O)(COO)6] (M3 = Co3, Ni3 or Co2Ti). These MOFs consisted of close-packed truncated octahedral cages possessing a sodalite topology and large β-cavity mesoporous cages (∼22 Å diameter) connected by ultramicroporous apertures (∼5.6 Å diameter). Notably, the supertetrahedron-based sodalite topology MOF combined with the Co2Ti trimer exhibited high thermal and chemical stability as well as the ability to efficiently separate acetylene (C2H2) from carbon dioxide (CO2).

Fluorocarbon-Functionalized Superhydrophobic Metal-Organic Framework: Enhanced CO2 Uptake via Photoinduced Postsynthetic Modification

The design and synthesis of porous materials for selective capture of CO₂ in the presence of water vapor is of paramount importance in the context of practical separation of CO₂ from the flue gas stream. Here, we report the synthesis and structural characterization of a photoresponsive fluorinated MOF {[Cd(bpee)(hfbba)]·EtOH}_n (1) constructed by using 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (hfbba), Cd(NO₃)₂, and 1,2-bis(4-pyridyl)ethylene (bpee) as building units. Due to the presence of the fluoroalkyl -CF₃ functionality, compound 1 exhibits superhydrophobicity, which is validated by both water vapor adsorption and contact angle measurements (152°). The parallel arrangement of the bpee linkers makes compound 1 a photoresponsive material that transforms to {[Cd₂(rctt-tpcb)(hfbba)₂]·2EtOH}_n (rctt-tpcb = regio cis,trans,trans-tetrakis(4-pyridyl)cyclobutane; 1IR) after a [2 + 2] cycloaddition reaction. The photomodified framework 1IR exhibits increased uptake of CO₂ in comparison to 1 under ambient conditions due to alteration of the pore surface that leads to additional weak electron donor-acceptor interactions with the -CF₃ groups, as examined through periodic density functional theory calculations. The enhanced uptake is also aided by an expansion of the pore window, which contributes to increasing the rotational entropy of CO₂, as demonstrated through force field based free energy calculations.

Two scandium-based coordination polymers: rapid ultrasound-assisted synthesis, crystal transformation, and catalytic properties

Assisted by ultrasound waves, a Sc-based coordination polymer CP 1 was synthesized successfully. With 1 as the precursor, another stable CP 2 can be obtained by single-crystal to single-crystal transformation and 2 exhibited good catalytic activities.

A "Thermodynamically Stable" 2D Nickel Metal-Organic Framework over a Wide pH Range with Scalable Preparation for Efficient C2 s over C1 Hydrocarbon Separations

The design and construction of "thermodynamically stable" metal-organic frameworks (MOFs) that can survive in liquid water, boiling water, and acidic/basic solutions over a wide pH range is highly desirable for many practical applications, especially adsorption-based gas separations with obvious scalable preparations. Herein, a new thermodynamically stable Ni MOF, {[Ni(L)(1,4-NDC)(H₂ O)₂ ]}_n (IITKGP-20; L=4,4'-azobispyridine; 1,4-NDC=1,4-naphthalene dicarboxylic acid; IITKGP stands for the Indian Institute of Technology Kharagpur), has been designed that displays moderate porosity with a BET surface area of 218 m²  g^-1 and micropores along the [10-1] direction. As an alternative to a cost-intensive, cryogenic, high-pressure distillation process for the separation of hydrocarbons, MOFs have recently shown promise for such separations. Thus, towards an application standpoint, this MOF exhibits a higher uptake of C₂ hydrocarbons over that of C₁ hydrocarbon under ambient conditions, with one of the highest selectivities based on the ideal adsorbed solution theory (IAST) method. A combination of two strategies (the presence of stronger metal-N coordination of the spacer and the hydrophobicity of the aromatic moiety of the organic ligand) possibly makes the framework highly robust, even stable in boiling water and over a wide range of pH 2-10, and represents the first example of a thermodynamically stable MOF displaying a 2D structural network. Moreover, this material is easily scalable by heating the reaction mixture at reflux overnight. Because such separations are performed in the presence of water vapor and acidic gases, there is a great need to explore thermodynamically stable MOFs that retain not only structural integrity, but also the porosity of the frameworks.

Carbamate-Isocyanurate-Bridged Periodic Mesoporous Organosilica for van der Waals CO2 Capture

We synthesized a new organosiloxane bridge on the basis of an isocyanurate derivative through a simple melt-fusion approach by the reaction of 3-isocyanatopropyltriethoxysilane (IPTES) with 1,3,5-tris(2-hydroxyethyl)-1,3,5-triazinane-2,4,6(1H,3H,5H)-trione (THEIC). The obtained carbamate-isocyanurate-based organosiloxane bridge precursor was used for the preparation of chemo- and thermostable periodic mesoporous organosilica (PMO-THEIC) on condensation with tetrathoxysilane silicon precursor through a soft-template approach. Furthermore, the synthesized PMO-THEIC with unique surface functionality was investigated for CO₂ capture. The results show that the PMO-THEIC has higher activity than pure SBA-15 for CO₂ capture due to the high affinity of carbamate functionalities embedded within the pore walls toward CO₂ molecules. The affinity of organosiloxane bridge for CO₂ molecules is mainly facilitated via the van der Waals force with carbamate functional groups rather than the isocyanurate ring, according to the density functional calculations.

Preparation of MOF catalysts and simultaneously modulated metal nodes and ligands via a one-pot method for optimizing cycloaddition reactions

MOFs were adjusted with metal nodes and ligands to endow them with Lewis acids and Brønsted acids for enhanced cycloaddition reactions.

Self-assembly of three-dimensional oxalate-bridged alkali(i)–lanthanide(iii) heterometal–organic frameworks

Three isostructural 3D oxalate bridged alkali(i)–lanthanide(iii) MOFs with a pcu net based on cubane-like [Ln₄O₄] clusters and their magnetic, CO₂ adsorption, and photoluminescence sensing properties are presented.

Hitherto unknown eight-connected frameworks formed from A4B4O12 metal organophosphate heterocubanes

Modulation of a functional group on the distal part of a phosphate ester has been prudently exploited to selectively switch between the formation of D4R SBUs and 3-D framework structures. While amino substitution at the para-position of an aryl phosphate results in the isolation of tetra-amino functionalized discrete D4R zinc phosphate or its 4-connected 3-D framework, the introduction of an acetylamino substituent leads to a single-step assembly of a rare eight-connected 3-D framework solid.

Molecular Sieving and Direct Visualization of CO2 in Binding Pockets of an Ultramicroporous Lanthanide Metal-Organic Framework Platform

Inspired by the structure of carbonic anhydrase, we developed a robust ultramicroporous lanthanide metal-organic framework (MOF) platform (NKMOF-3-Ln), which possesses a porous pocket to selectively bind with CO₂ at ambient conditions. Notably, CO₂ molecules can be precisely observed in the single-crystal structure of NKMOF-3-Ln. Highly ordered CO₂ molecules can strongly interact with the framework via electrostatic interaction of nitrates. We found that the CO₂ adsorption capacity and binding energy were gradually enhanced as lanthanide contraction. The strong CO₂ binding affinity endows NKMOF-3-Ln with excellent CO₂ separation performance, which is verified by experimental breakthrough results. Moreover, because of the specific binding affinity of CO₂, NKMOF-3-Eu showed a fluorescence response to CO₂.

Halogen Functionalization of Aluminium Fumarate Metal–Organic Framework via In Situ Hydrochlorination of Acetylenedicarboxylic Acid

The successful chloro-functionalization of aluminium fumarate (MIL-53-Fum) was achieved by in situ hydrochlorination of acetylenedicarboxylic acid on reaction with aluminium chloride resulting in the formation of the aluminium chlorofumarate metal–organic framework (MIL-53-Fum-Cl=[Al(OH)(Fum-Cl)]) in a one-pot reaction. The chloro functional groups decorating the pores enhance gas (CO2, CH4, and H2) sorption capacities and affinity compared with the non-functionalized MIL-53-Fum. The functionalization also results in a 2-fold increase in the selective adsorption of CO2 over CH4 compared with MIL-53-Fum.

Highly selective C2H2 and CO2 capture and magnetic properties of a robust Co-chain based metal–organic framework

A robust Co-MOF based on uncommon 1D alternate Co₄ chain units was synthesized, which efficiently takes up C₂H₂ and CO₂ with significant selectivity for C₂H₂ and CO₂ over CH₄, as well as shows a slow freezing process of magnetic behavior.