Hybridization of metal-organic frameworks and MXenes: Expanding horizons in supercapacitor applications

Metal-organic frameworks (MOFs) and MXenes have gained prominence in the queue of advanced material research. Both materials' outstanding physical and chemical characteristics prominently promote their utilization in diverse fields, especially the electrochemical energy storage (EES) domain. The collective contribution of extremely high specific surface area (SSA), customizable pores, and abundant active sites propose MOFs as integral materials for EES devices. However, conventional MOFs endure low conductivity, constraining their utility in practical applications. The development of hybrid materials via integrating MOFs with various conductive materials stands out as an effective approach to improvising MOF's conductivity. MXenes, formulated as two-dimensional (2D) carbides and nitrides of transition metals, fall in the category of the latest 2D materials. MXenes possess extensive structural diversity, impressive conductivity, and rich surface chemical characteristics. The electrochemical characteristics of MOF@MXene hybrids outperform MOFs and MXenes individually, credited to the synergistic effect of both components. Additionally, the MOF derivatives coupled with MXene, exhibiting unique morphologies, demonstrate outstanding electrochemical performance. The important attributes of MOF@MXene hybrids, including the various synthesis protocols, have been summarized in this review. This review delves into the architectural analysis of both MOFs and MXenes, along with their advanced hybrids. Furthermore, the comprehensive survey of the latest advancements in MOF@MXene hybrids as electroactive material for supercapacitors (SCs) is the prime objective of this review. The review concludes with an elaborate discussion of the current challenges faced and the future outlooks for optimizing MOF@MXene composites.

Highly Electroactive Co2+-Based Metal-Organic Frameworks as an Efficient Coreaction Accelerator for Amplifying Near-Infrared Electrochemiluminescence of Gold Nanoclusters in Biomarkers Immunoassay

Metal nanoclusters (NCs) as a new kind of luminophore have acquired sufficient interest, but their widespread application is restricted on account of their relatively low electrochemiluminescence (ECL) efficiency. Then, aqueous metal NCs with high ECL efficiency were strongly anticipated, especially for the ultrasensitive analysis of biomarkers. Herein, a near-infrared (NIR) ECL biosensing strategy for the test of neuron-specific enolase (NSE) was proposed by utilizing N-acetyl-l-cysteine (NAC)- and cysteamine (Cys)-stabilized gold NCs (NAC/Cys-AuNCs) as ECL emitters with the NIR ECL emission around 860 nm and a metal-organic framework/palladium nanocubes (ZIF-67/PdNCs) hybrid as the coreaction accelerator through their admirable electrocatalytic activity. The NIR emission would reduce photochemical injury to the samples and even realize nondestructive analysis with highly strong susceptibility and suitability. Furthermore, the utilization of ZIF-67/PdNCs could improve the ECL response of NAC/Cys-AuNCs by facilitating the oxidation of the coreactant triethylamine (TEA), leading to the production of a larger quantity of reducing intermediate radical TEA•+. Consequently, NAC/Cys-AuNCs with ZIF-67/PdNCs displayed 2.7 fold enhanced ECL emission compared with the single NAC/Cys-AuNCs using TEA as the coreactant. In addition, HWRGWVC (HWR), a heptapeptide, was introduced to immobilize antibodies for the specially binding Fc fragment of the antibodies, which improved the binding efficiency and sensitivity. As a result, a "signal-on" immunosensor for NSE analysis was obtained with an extensive linear range of 0.1 to 5 ng/mL and a low limit of detection (0.033 fg/mL) (S/N = 3). This study provides a wonderful method for the development of an efficient nondestructive immunoassay.

Direct ink writing 3D printing of low-dimensional nanomaterials for micro-supercapacitors

Micro-supercapacitors (MSCs) have attracted significant attention for potential applications in miniaturized electronics due to their high power density, rapid charge/discharge rates, and extended lifespan. Despite the unique properties of low-dimensional nanomaterials, which hold tremendous potential for revolutionary applications, effectively integrating these attributes into MSCs presents several challenges. 3D printing is rapidly emerging as a key player in the fabrication of advanced energy storage devices. Its ability to design, prototype, and produce functional devices incorporating low-dimensional nanomaterials positions it as an influential technology. In this review, we delve into recent advancements and innovations in micro-supercapacitor manufacturing, with a specific focus on the incorporation of low-dimensional nanomaterials using direct ink writing (DIW) 3D printing techniques. We highlight the distinct advantages offered by low-dimensional nanomaterials, from quantum effects in 0D nanoparticles that result in high capacitance values to rapid electron and ion transport in 1D nanowires, as well as the extensive surface area and mechanical flexibility of 2D nanosheets. Additionally, we address the challenges encountered during the fabrication process, such as material viscosity, printing resolution, and seamless integration of active materials with current collectors. This review highlights the remarkable progress in the energy storage sector, demonstrating how the synergistic use of low-dimensional nanomaterials and 3D printing technologies not only overcomes existing limitations but also opens new avenues for the development and production of advanced micro-supercapacitors. The convergence of low-dimensional nanomaterials and DIW 3D printing heralds the advent of the next generation of energy storage devices, making a significant contribution to the field and laying the groundwork for future innovations.

The Utilization of Metal-Organic Frameworks and Their Derivatives Composite in Supercapacitor Electrodes

Up to now, the mainstream adoption of renewable energy has brought about substantial transformations in the electricity and energy sector. This shift has garnered considerable attention within the scientific community. Supercapacitors, known for their exceptional performance metrics like good charge/discharge capability, strong power density, as well as extended cycle longevity, have gained widespread traction across various sectors, including transportation and aviation. Metal-organic frameworks (MOFs) with unique traits including adaptable structure, highly customizable synthetic methods, and high specific surface area, have emerged as strong candidates for electrode materials. For enhancing the performance, MOFs are commonly compounded with other conducting materials to increase capacitance. This paper provides a detailed analysis of various common preparation strategies and characteristics of MOFs. It summarizes the recent application of MOFs and their derivatives as supercapacitor electrodes alongside other carbon materials, metal compounds, and conductive polymers. Additionally, the challenges encountered by MOFs in the realm of supercapacitor applications are thoroughly discussed. Compared to previous reviews, the content of this paper is more comprehensive, offering readers a deeper understanding of the diverse applications of MOFs. Furthermore, it provides valuable suggestions and guidance for future progress and development in the field of MOFs.

MOF/graphene oxide based composites in smart supercapacitors: a comprehensive review on the electrochemical evaluation and material development for advanced energy storage devices

The surge in interest surrounding energy storage solutions, driven by the demand for electric vehicles and the global energy crisis, has spotlighted the effectiveness of carbon-based supercapacitors in meeting high-power requirements. Concurrently, metal-organic frameworks (MOFs) have gained attention as a template for their integration with graphene oxide (GO) in composite materials which have emerged as a promising avenue for developing high-power supercapacitors, elevating smart supercapacitor efficiency, cyclic stability, and durability, providing crucial insights for overcoming contemporary energy storage obstacles. The identified combination leverages the strengths of both materials, showcasing significant potential for advancing energy storage technologies in a sustainable and efficient manner. In this research, an in-depth review has been presented, in which properties, rationale and integration of MOF/GO composites have been critically examined. Various fabrication techniques have been thoroughly analyzed, emphasizing the specific attributes of MOFs, such as high surface area and modifiable porosity, in tandem with the conductive and stabilizing features of graphene oxide. Electrochemical characterizations and physicochemical mechanisms underlying MOF/GO composites have been examined, emphasizing their synergistic interaction, leading to superior electrical conductivity, mechanical robustness, and energy storage capacity. The article concludes by identifying future research directions, emphasizing sustainable production, material optimization, and integration strategies to address the persistent challenges in the field of energy storage. In essence, this research article aims to offer a concise and insightful resource for researchers engaged in overcoming the pressing energy storage issues of our time through the exploration of MOF/GO composites in smart supercapacitors.

Bottom-Up Construction of Rhombic Lamellar CoNi-MOFs for the Electrochemical Sensing of H2S

Lamellar metal-organic frameworks (MOFs) have attracted significant attention in the field of electrochemical sensing due to their abundant open active sites and specific electron conductivity. Herein, by employing a bottom-up synthesis strategy, rhombic lamellar heterometallic CoNi-MOFs with varying thicknesses are constructed. This is achieved by using 4-methylpyridine as a capping agent based on the (4,6)-linked Co2(azpy)2(bptc) (azpy = 4,4'-azopyridine, bptc = 3,3',5,5'-biphenyltetracarboxylic acid) structure with a fsc topology and by introducing Ni species simultaneously. To mitigate sulfur deposition on electrodes, the triple pulse amperometry (TPA) method is employed. Among the synthesized lamellar CoNi-MOFs, lamellar CoNi-MOF-3 with the minimum thickness exhibits an optimal electrochemical sensing performance toward hydrogen sulfide, with a sensitivity of 119.3 μA·mM-1·cm-2 in the linear range of 2-2000 μM. This study pioneers a new approach to the controlled construction and electrochemical activity modification of lamellar MOF materials.

Polyethylene terephthalate waste derived nanomaterials (WDNMs) and its utilization in electrochemical devices

Plastics are a vital component of our daily lives in the contemporary globalization period; they are present in all facets of modern life. Because the bulk of synthetic plastics utilized in the market are non-biodegradable by nature, the issues associated with their contamination are unavoidable in an era dominated by polymers. Polyethylene terephthalate (PET), which is extensively used in industries such as automotive, packaging, textile, food, and beverages production represents a major share of these non-biodegradable polymer productions. Given its extensive application across various sectors, PET usage results in a considerable amount of post-consumer waste, majority of which require disposal after a certain period. However, the recycling of polymeric waste materials has emerged as a prominent topic in research, driven by growing environmental consciousness. Numerous studies indicate that products derived from polymeric waste can be converted into a new polymeric resource in diverse sectors, including organic coatings and regenerative medicine. This review aims to consolidate significant scientific literatures on the recycling PET waste for electrochemical device applications. It also highlights the current challenges in scaling up these processes for industrial application.

MOF (UiO-66-NH2)@COF (TFP-TABQ) hybrids via on-surface condensation reactions for sustainable energy storage

Core-shell MOF@COF hybrids were synthesized via subsequent modification of MOF UiO-66-NH2 with 1,3,5-triformylphloroglucinol (TFP) and 2,3,5,6-tetraaminobenzoquinone (TABQ). The hybrids exhibited significant surface area (236 m2 g-1) and outstanding electrochemical performance (103 F g-1 at 0.5 A g-1), surpassing both COFs and MOFs, thereby showcasing the potential of on-surface condensation reactions for developing high-performance energy storage devices.

A high valence binary metal-organic framework as an electrode material for aqueous asymmetric supercapacitors

This study presents the chemical transformation of nickel-based metal-organic frameworks into binary metal-organic frameworks by introducing cobalt metal ions. The resulting NiCo-BDC hierarchical nanostructure exhibited higher oxidation states, resulting in an impressive capacitance of 1431 F g-1. Additionally, the device based on this material exhibited exceptional capacity retention over 3000 cycles.

Effect of Crystal Morphology on Electrochemical Performances of IRH-2 and IRH-2/PANI Composite for Supercapacitor Electrodes

In the context of recent progress in designing metal-organic framework (MOF)-based supercapacitor electrodes, we report herein the successful growth of two different crystal morphologies of a cerium-based MOF, octahedral crystals named IRH-2-O and elongated square-bipyramidal crystals named IRH-2-ESBP (IRH = Institute de Recherche sur l'Hydrogène). The identical crystal structure of both materials was confirmed by powder X-ray diffraction (PXRD). Furthermore, scanning electron microscopy and energy-dispersive X-ray mapping analysis corroborated this fact and showed the crystal shape variation versus the surface composition of synthesized materials. Fourier transform infrared spectroscopy, UV-vis spectroscopy, and PXRD were used to confirm the purity of pristine MOFs as well as desired MOF//PANI composites. Cyclic voltammetry and electrochemical impedance spectroscopy highlighted the effect of crystal shape on the electrochemical performance of IRH-2 MOFs; the specific capacitance tripled from 43.1 F·g-1 for IRH-2-O to 125.57 F·g-1 for IRH-2-ESBP at 5 mV·s-1. The cycling stability was notably ameliorated from 7 K for IRH-2-O to 20 K for IRH-2-ESBP. Regarding the composites, the cell voltage was notably ameliorated from 1.8 to 1.95 V. However, the electrochemical performance of IRH-2/PANI composites was drastically decreased due to instability in the acidic media. To the best of our knowledge, our work is the first work that related the MOF crystal shape and the electrochemical performance.

Metal-Organic Frameworks and Their Derivatives-Based Nanostructure with Different Dimensionalities for Supercapacitors

With the urgent demand for the achievement of carbon neutrality, novel nanomaterials, and environmentally friendly nanotechnologies are constantly being explored and continue to drive the sustainable development of energy storage and conversion installations. Among various candidate materials, metal-organic frameworks (MOFs) and their derivatives with unique nanostructures have attracted increasing attention and intensive investigation for the construction of next generation electrode materials, benefitting from their unique intrinsic characteristics such as large specific surface area, high porosity, and chemical tunability as well as the interconnected channels. Nevertheless, the poor electrochemical conductivity severely limits their application prospects, hence a variety of nanocomposites with multifarious structures have been designed and proposed from different dimensionalities. In this review, recent advances based on MOFs and their derivatives in different dimensionalities ranging from 1D nanopowders to 2D nanofilms and 3D aerogels, as well as 4D self-supporting electrodes for supercapacitors are summarized and highlighted. Furthermore, the key challenges and perspectives of MOFs and their derivatives-based materials for the practical and sustainable electrochemical energy conversion and storage applications are also briefly discussed, which may be served as a guideline for the design of next-generation electrode materials from different dimensionalities.

Anion-directed structural tuning of two azomethine-derived Zn2+ complexes with optoelectronic recognition of Cu2+ in aqueous medium with anti-cancer activities: from micromolar to femtomolar sensitivity with DFT revelation

Herein, two novel mononuclear transition metal Zn2+ complexes i.e. [Zn(HL)(N3)(OAc)] (NS-1) & [Zn(HL)2(ClO4)2] (NS-2) have been synthesised using a tridentate clickable Schiff base ligand, HL (2-methyl-2-((pyridin-2-ylmethyl)amino)propan-1-ol), and the polyatomic monoanions N3- and ClO4- for NS-1 and NS-2 respectively. Interestingly, NS-1 and NS-2 have been explored for the detection of Cu2+ with an LOD of 48.6 fM (response time ∼6 s) and 2.4 μM respectively through two mutually independent pathways that were studied using sophisticated methods like UV-Vis, cyclic voltammetry, ESI-MS etc. with theoretical DFT support. Herein, both chemosensors are equally responsive towards the detection of Cu2+ in aqueous as well as other targeted real field samples with appreciable recovery percentage (74.8-102%), demonstrating their practical applicability. Moreover, the detection of unbound Cu2+ in a human urine specimen was also analysed which may be helpful for the diagnosis of Cu2+-related disorders like Wilson's disease. Taking one step ahead, TLC strips have been employed for on-field detection of the targeted analytes by contact mode analysis. Additionally, the anti-cancer activity of these complexes has also been studied on breast cancer cells with the help of the MTT assay. It has been found that at a 0.5 mM dose, both NS-1 and NS-2 could kill 81.4% and 73.2% of cancer cells respectively. However, it has been found that NS-1 destroys normal cells together with cancer cells. Hence, NS-2 could be administered as a better anticancer drug for MDA-MB-231 cancer cells in comparison with NS-1. In a nutshell, the present work describes how anion-directed synthesis of two architecturally different metal complexes leads toward the detection of the same analyte via an independent chemodosimetric pathway along with their anti-cancer activities on breast cancer cells.

Redox active pyridine-3,5-di-carboxylate- and 1,2,3,4-cyclopentane tetra-carboxylate-based cobalt metal-organic frameworks for hybrid supercapacitors

In the pursuit of developing superior energy storage devices, an integrated approach has been advocated to harness the desirable features of both batteries and supercapacitors, particularly their high energy density, and high-power density. Consequently, the emergence of hybrid supercapacitors has become a subject of increasing interest, as they offer the potential to merge the complementary attributes of these two technologies into a single device, thereby surpassing the limitations of conventional energy storage systems. In this context the Metal-Organic Frameworks (MOFs), consisting of metal centers and organic linkers, have emerged as highly trending materials for energy storage by virtue of their high porosity. Here, we investigate the electrochemical performance of cobalt-pyridine-3,5-di-carboxylate-MOF (Co-PDC-MOF) and cobalt-1,2,3,4-cyclopentane tetra-carboxylate-MOF (Co-CPTC-MOF). In the setup involving the analysis of Co-PDC-MOF and Co-CPTC-MOF materials, a configuration comprising three electrodes was utilized. Drawing upon the promising initial properties of CPTC, a battery device was fabricated, comprising Co-CPTC-MOF, and activated carbon (AC) electrodes. Retaining a reversible capacity of 97% the device showcased impressive energy and power density of 20.7 W h g^-1 and 2608.5 W kg^-1, respectively. Dunn's model was employed, to gain deeper insights into the capacitive and diffusive contributions of the device.

From 1D to 2D: Controllable Preparation of 2D Ni-MOFs for Supercapacitors

Controllable modulation strategies between one-dimensional (1D) and two-dimensional (2D) structures have been rarely reported for metal-organic frameworks (MOFs). Here, 1D, 1D/2D, and 2D Ni-MOFs can be facilely prepared by adjusting the ratio of Ni²⁺ and the pyromellitic acid linker. A low-dimensional structure can shorten the transmission distance, while MOFs with a high Ni²⁺ content can supply rich active sites for oxidation-reduction reactions. The 2D structure Ni-MOF with an optimized Ni²⁺/pyromellitic acid ratio presents a good performance of 1036 F g^-1 at a current density of 1 A g^-1 with a comparable rate performance of 62% at 20 A g^-1. The study may offer a facile design to control the structure of MOFs for employing in electrochemical energy storage.

Road Map for In Situ Grown Binder-Free MOFs and Their Derivatives as Freestanding Electrodes for Supercapacitors

Among several electrocatalysts for energy storage purposes including supercapacitors, metal-organic frameworks (MOFs), and their derivatives have spurred wide spread interest owing to their structural merits, multifariousness with tailor-made functionalities and tunable pore sizes. The electrochemical performance of supercapacitors can be further enhanced using in situ grown MOFs and their derivatives, eliminating the role of insulating binders whose "dead mass" contribution hampers the device capability otherwise. The expulsion of binders not only ensures better adhesion of catalyst material with the current collector but also facilitates the transport of electron and electrolyte ions and remedy cycle performance deterioration with better chemical stability. This review systematically summarizes different kinds of metal-ligand combinations for in situ grown MOFs and derivatives, preparation techniques, modification strategies, properties, and charge transport mechanisms as freestanding electrode materials in determining the performance of supercapacitors. In the end, the review also highlights potential promises, challenges, and state-of-the-art advancement in the rational design of electrodes to overcome the bottlenecks and to improve the capability of MOFs in energy storage applications.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

Pouch-Type Asymmetric Supercapacitor Based on Nickel-Cobalt Metal-Organic Framework

Bimetal-organic frameworks (BMOFs) have attracted considerable attention as electrode materials for energy storage devices because of the precise control of their porous structure, surface area, and pore volume. BMOFs can promote multiple redox reactions because of the enhanced charge transfer between different metal ions. Therefore, the electroactivity of the electrodes can be significantly improved. Herein, we report a NiCo-MOF (NCMF) with a three-dimensional hierarchical nanorod-like structure prepared using a facile solvo-hydrothermal method. The as-prepared NCMF was used as the positive electrode in a hybrid pouch-type asymmetric supercapacitor device (HPASD) with a gel electrolyte (KOH+PVA) and activated carbon as the negative electrode. Because of the matchable potential windows and specific capacitances of the two electrodes, the assembled HPASD exhibits a specific capacitance of 161 F·g^-1 at 0.5 A·g^-1, an energy density of 50.3 Wh·kg^-1 at a power density of 375 W·kg^-1, and a cycling stability of 87.6% after 6000 cycles. The reported unique synthesis strategy is promising for producing high-energy-density electrode materials for supercapacitors.

A three-dimensional Mn-based MOF as a high-performance supercapacitor electrode

Developing new high-performance electrode materials for improving the energy density of supercapacitors is an important task. Herein, a new three-dimensional (3D) metal-orgainc framework (MOF) [Mn(BGPD)(H₂O)₂] (Mn-BGPD; BGPD = N,N'-bis(glycinyl)pyromellitic diimide) was synthesized. When Mn-BGPD is used as the electrode material of supercapacitors, in a three-electrode setup, it shows an outstanding specific capacitance of 832.6 F g^-1 at a current density of 1 A g^-1. The asymmetrical supercapacitor of Mn-BGPD shows an attractive specific capacitance of 100 F g^-1 at 1 A g^-1, which corresponds to an excellent energy density of 35.5 W h kg^-1. Moreover, better cycling stability with a capacitance retention of 46.7% is also shown. The high electrochemical performance makes Mn-BGPD a very promising electrode material for supercapacitors.

In Situ Construction of ZIF-67-Derived Hybrid Tricobalt Tetraoxide@Carbon for Supercapacitor

The Co3O4 electrode is a very promising material owing to its ultrahigh capacitance. Nevertheless, the electrochemical performance of Co3O4-based supercapacitors is practically confined by the limited active sites and poor conductivity of Co3O4. Herein, we provide a facile synthetic strategy of tightly anchoring Co3O4 nanosheets to a carbon fiber conductive cloth (Co3O4@C) using the zeolitic imidazolate framework-67 (ZIF-67) sacrificial template via in situ impregnation and the pyrolysis method. Benefiting from the enhancement of conductivity and the increase in active sites, the binder-free porous Co3O4@C supercapacitor electrodes possess typical pseudocapacitance characteristics, with an acceptable specific capacitance of ~251 F/g at 1 A/g and long-term cycling stability (90% after cycling 5000 times at 3 A/g). Moreover, the asymmetric and flexible supercapacitor composed of Co3O4@C and activated carbon is further assembled, and it can drive the red LED for 6 min.

One-Dimensional Co-Carbonate Hydroxide@Ni-MOFs Composite with Super Uniform Core-Shell Heterostructure for Ultrahigh Rate Performance Supercapacitor Electrode

The insufficient contact between two phases in the heterostructure weakens the coupling interaction effect, which makes it difficult to effectively improve the electrochemical performance. Herein, a Co-carbonate hydroxide@ Ni-metal organic frameworks (Co-CH@Ni-MOFs) composite with super uniform core-shell heterostructure is fabricated by adopting 1D Co-CH nanowires as structuredirecting agents to induce the coating of Ni-MOFs. Both experimental and theoretical calculation results demonstrate that the heterostructure plays a vital role in the high performance of the as-prepared materials. On the one hand, the construction of super uniform core-shell heterostructure can create a large number of interfacial active sites and take advantages of the electrochemical characteristics of each component. On the other hand, the heterostructure can increase the adsorption energy of OH^- ions and promote the electrochemical activity for improving the reversible redox reaction kinetics. Based on the aforementioned advantages, the as-fabricated Co-CH@Ni-MOFs electrode exhibits a high specific capacity of 173.1 mAh g^-1 (1246 F g^-1 ) at 1 A g^-1 , an ultrahigh rate capability of 70.3% at 150 A g^-1 and excellent cycling stability with 90.1% capacity retention after 10 000 cycles at 10 A g^-1 . This study may offer a versatile design for fabricating a MOFs-based heterostructure as energy storage electrodes.

Three-dimensional hierarchical conductive metal–organic frameworks/NiFe layered double hydroxide/carbon nanofibers: an efficient oxygen evolution reaction catalyst for Zn–air batteries

The structural and compositional modulation of inexpensive hydroxides is not only important, but also an ongoing challenge for the preparation of efficient oxygen evolution reaction (OER) electrocatalysts.

Cobalt-based metal-organic framework electrodeposited on nickel foam as a binder-free electrode for high-performance supercapacitors

Cobalt-based metal-organic framework (Co-MOF) has been in-situ grown on nickel foam (NF) by cathodic electrodeposition using highly active cobalt surface modifier to enable uniform nucleation and tight growth of Co-MOF....

The methodologically obtained derivative of ZIF-67 metal–organic frameworks present impressive supercapacitor performance

Oxidation, vulcanization, and phosphorization methods were used to improve the energy storage performance of ZIF-67 in the supercapacitor.

State of the art developments and prospects of metal-organic frameworks for energy applications

The progress on technologies for the cleaner and ecological transformation and storage of energy to combat effluence or pollution and the impending energy dilemma has recently attracted interest from energy research groups, particularly in the field of coordination chemistry, among inorganic chemists. Carriers for storing energy or facilitating mass and e^- transport are considered significant for energy conversion. Accordingly, considering their properties such as large surface area, low cost, customizable pore diameter, tunable topologies, low densities, and variable frameworks, MOFs (metal-organic frameworks) and their derivatives are well-suited for this purpose. MOFs are an innovative category of porous and crystalline materials, which have gained significant interest in recent years. Thus, herein, we highlight the state of the art progress on MOFs for energy-based applications, as perfect compounds and elements in compound assemblies for converting solar energy, lithium-ion arrays, fuel devices, hydrogen production, photocatalytic CO₂ reduction, proton conduction, etc. In addition, the substantial progress achieved in the production of various composites and derivatives containing MOFs with particular focus on supercapacitors and gas adsorption and storage is summarized, concentrating on the correlation between their coordination structural frameworks and applications in the field of energy. The current improved strategies, challenges, and future prospects are also presented in view of the coordination chemistry governing the structural modification of MOFs for energy applications.

Layered Double Hydroxide Hollowcages with Adjustable Layer Spacing for High Performance Hybrid Supercapacitor

Layered double hydroxides (LDHs) have been considered as promising electrodes for supercapacitors due to their adjustable composition, designable function and superior high theoretic capacity. However, their experimental specific capacity is significantly lower than the theoretical value due to their small interlayer spacing. Therefore, obtaining large interlayer spacing through the intercalation of large-sized anions is an important means to improve capacity performance. Herein, a metal organic framework derived cobalt-nickel layered double hydroxide hollowcage intercalated with different concentrations of 1,4-benzenedicarboxylic acid (H₂ BDC) through in-situ cationic etching and organic ligand intercalation method is designed and fabricated. The superior specific capacity and excellent rate performance are benefit from the large specific surface area of the hollow structure and increasing interlayer spacing of LDH after H₂ BDC intercalation. The sample with the largest layer spacing displays a maximum specific capacity of 229 mA h g^-1 at 1 A g^-1 . In addition, the hybrid supercapacitor assembled from the sample with the largest layer spacing and active carbon electrode has a maximum specific capacity of 158 mA h g^-1 at 1 A g^-1 ; the energy density is as high as 126.4 W h kg^-1 at 800 W kg^-1 and good cycle stability.

Substituent effects on through-space intervalence charge transfer in cofacial metal-organic frameworks

Electroactive metal-organic frameworks (MOFs) are an attractive class of materials owing to their multifunctional 3-dimensional structures, the properties of which can be modulated by changing the redox states of the components. In order to realise both fundamental and applied goals for these materials, a deeper understanding of the structure-function relationships that govern the charge transfer mechanisms is required. Chemical or electrochemical reduction of the framework [Zn(BPPFTzTz)(tdc)]·2DMF, hereafter denoted ZnFTzTz (where BPPFTzTz = 2,5-bis(3-fluoro-4-(pyridin-4-yl)phenyl)thiazolo[5,4-d]thiazole), generates mixed-valence states with optical signatures indicative of through-space intervalence charge transfer (IVCT) between the cofacially stacked ligands. Fluorination of the TzTz ligands influences the IVCT band parameters relative to the unsubstituted parent system, as revealed through Marcus-Hush theory analysis and single crystal UV-Vis spectroscopy. Using a combined experimental, theoretical and density functional theory (DFT) analysis, important insights into the effects of structural modifications, such as ligand substitution, on the degree of electronic coupling and rate of electron transfer have been obtained.

Fabrication of Vertical-Standing Co-MOF Nanoarrays with 2D Parallelogram-like Morphology for Aqueous Asymmetric Electrochemical Capacitors

Metal organic frameworks (MOFs) have been considered as one of the most promising electrode materials for electrochemical capacitors due to their large specific surface area and abundant pore structure. Herein, we report a Co-MOF electrode with a vertical-standing 2D parallelogram-like nanoarray structure on a Ni foam substrate via a one-step solvothermal method. The as-prepared Co-MOF on a Ni foam electrode delivered a high area-specific capacitance of 582.0 mC cm⁻² at a current density of 2 mA cm⁻² and a good performance rate of 350.0 mC cm⁻² at 50 mA cm⁻². Moreover, an asymmetric electrochemical capacitor (AEC) device (Co-MOF on Ni foam//AC) was assembled by using the as-prepared Co-MOF on a Ni foam as the cathode and a active carbon-coated Ni foam as the anode to achieve a maximum energy density of 0.082 mW cm⁻² at a power density of 0.8 mW cm⁻², which still maintained 0.065 mW cm⁻² at a high power density of 11.94 mW cm⁻². Meanwhile, our assembled device exhibited an excellent cycling stability with a capacitance retention of nearly 100% after 1000 cycles. Therefore, this work provides a simple method to prepare MOF-based material for the application of energy storage and conversion.

Effective enhancement of capacitive performance by the facile exfoliation of bulk metal-organic frameworks into 2D-functionalized nanosheets

Recently, much attention has been paid to two-dimensional MOF nanosheets (MONs) due to their widespread application in many specific areas. In this work, a simple and efficient congenerous-exfoliation strategy was developed to prepare vast and uniform few-layered Ni²⁺@Ce-MOF (Ce-MOF: {[Ce(HPIA)(PIA)(H₂O)₂]·H₂O}_n) nanosheets with a thickness of ca. 10 nm. In the exfoliation process, the synergistic action of Ni²⁺ and methanol solvents under ultrasonication plays a major role in restraining the interactions between the layers. Importantly, supercapacitor applications indicate that the exfoliated Ni²⁺@Ce-MOF nanosheet shows a remarkable improvement in the specific capacitance (921.05%) in comparison with that of the bulk Ce-MOF sample before modification.

One-pot construction of highly oriented Co-MOF nanoneedle arrays on Co foam for high-performance supercapacitor

Highly oriented Co-MOF nanoneedle arrays arein situconstructed on Co foam (Co-MOF@Co) by using a one-pot solvothermal strategy. As-prepared Co-MOF@Co can be directly served as a binder-free electrode for supercapacitor, which exhibits wonderful electrochemical performances, i.e. high specific capacitance (12783.0 mF cm^-2or 1164.2 F g^-1), exceptional cycling stability (90.5% retention over 10 000 cycles at 250 mA cm^-2) with a loading of 10.98 mg cm^-2. Meanwhile, an asymmetric supercapacitor of AC//Co-MOF@Co delivers a high ratability (87% retention upon ten-fold current density) and high energy density of 43.4 W h kg^-1at the power density of 145.1 W kg^-1.

MXenes induced formation of Ni-MOF microbelts for high-performance supercapacitors

For the sake of developing new energy storage devices for satisfying the energy needs of the modern society, we herein report an innovative MXene-induced strategy to synthesize Ti₃C₂T_x MXenes/Ni based metal-organic framework composites (Ti₃C₂T_x/Ni-MOFs) for high-performance supercapacitors. The two-dimensional (2D) MXenes with oxygen-containing groups on the surface can be used as structure-directing agents to tune the Ni-MOFs into 2D microbelts. The presence of MXenes cannot only improve conductivity of the composite but also provide additional electric double layer capacitance and faradaic pseudocapacitance. The 2D Ni-MOF microbelts can offer rich activity sites for the faradaic redox reactions and shorten the ion transport path. Taking advantages of synergistic effects of Ni-MOF microbelts and Ti₃C₂T_x MXenes, the prepared Ti₃C₂T_x/Ni-MOFs electrode shows a good electrochemical performance with 1124 F g^-1 at the current density of 1 A g ^-1 and 62% rate capability at 20 A g ^-1. This work can offer a new insight to design 2D MOF belts as high-performance electrode materials for supercapacitors.

Diblock copolymers directing construction of hierarchically porous metal-organic frameworks for enhanced-performance supercapacitors

A rationally designed strategy is developed to synthesize hierarchically porous Fe-based metal-organic frameworks (P-Fe-MOF) via solution-based self-assembly of diblock copolymers. The well-chosen amphiphilic diblock copolymers (BCP) of polystyrene-block-poly(acrylic acid) (PS-b-PAA) exhibits outstanding tolerance capability of rigorous conditions (e.g. strong acidity or basicity, high temperature and pressure), steering the peripheral crystallization of Fe-based MOF by anchoring ferric ions with outer PAA block. Importantly, the introduction of BCP endows MOF materials with additional mesopores (∼40 nm) penetrating whole crystals, along with their inherent micropores and introduced macropores. The unique hierarchically porous architecture contributes to fast charge transport and electrolyte ion diffusion, and thus promotes their redox reaction kinetics processes. Accordingly, the resultant P-Fe-MOF material as a new electrode material for supercapacitors delivers the unprecedented highest specific capacitance up to 78.3 mAh g^-1 at a current density of 1 A g^-1, which is 9.8 times than that of Fe-based MOF/carbon nanotubes composite electrode reported previously. This study may inspire new design of porous metal coordination polymers and advanced electrode materials for energy storage and conversion field.

Polyvinylpyrrolidone (PVP) assisted in-situ construction of vertical metal-organic frameworks nanoplate arrays with enhanced electrochemical performance for hybrid supercapacitors

Construction of two-dimensional (2D) metal-organic frameworks (MOFs) for energy storage and conversion has attracted great attention due to the synergistic advantages of 2D nanostructures and MOFs. Herein, a Co-MOF material with different 2D morphologies of vertical nanoplate arrays and faveolate nanosheets are in-situ fabricated on Ni foam with and without using polyvinylpyrrolidone (PVP) as a regulator. Toward the application in energy storage, both of two morphologies of the Co-MOF exhibit good electrochemical properties. In particular, the vertical Co-MOF nanoplate arrays deliver a high areal capacity of 8.56 C/cm² at the current density of 5 mA/cm², which is much higher than that of faveolate Co-MOF nanosheets (2.39 C/cm² at 5 mA/cm²). Moreover, a hybrid supercapacitor (HSC) device using the Co-MOF nanoplate arrays positive electrode and activated carbon (AC) negative electrode is assembled, which delivers a volumetric capacitance of 17.9 F/cm³ at 10 mA/cm², a high energy density of 7.2 mW h cm^-3 and a good cyclic stability (retaining over 88.0% of initial capacitance after 3000 cycles). These findings demonstrate that the as-fabricated 2D Co-MOFs possess a huge potential in energy storage.