Ultra-stable binder-free rechargeable Li/I2 batteries enabled by "Betadine" chemical interaction

Halogen-powered static conversion chemistry

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

Bis-Alkoxide Dysprosium(III) Crown Ether Complexes Exhibit Tunable Air Stability and Record Energy Barrier

High-performance and air-stable single-molecule magnets (SMMs) can offer great convenience for the fabrication of information storage devices. However, the controversial requisition of high stability and magnetic axiality is hard to balance for lanthanide-based SMMs. Here, a family of dysprosium(III) crown ether complexes possessing hexagonal-bipyramidal (pseudo-D6h symmetry) local coordination geometry with tunable air stability and effective energy barrier for magnetization reversal (Ueff) are shown. The three complexes share the common formula of [Dy(18-C-6)L2][I3] (18-C-6 = 1,4,7,10,13,16-hexaoxacyclooctadecane; L = I, 1; L = OtBu 2 and L = 1-AdO 3). 1 is highly unstable in the air. 2 can survive in the air for a few minutes, while 3 remains unchanged in the air for more than 1 week. This is roughly in accordance with the percentage of buried volumes of the axial ligands. More strikingly, 2 and 3 show progressive enhancement of Ueff and 3 exhibits a record high Ueff of 2427(19) K, which significantly contributes to the 100 s blocking temperature up to 11 K for Yttrium-diluted sample, setting a new benchmark for solid-state air-stable SMMs.

Toward Sustainable Metal-Iodine Batteries: Materials, Electrochemistry and Design Strategies

Due to the natural abundance of iodine, cost-effective, and sustainability, metal-iodine batteries are competitive for the next-generation energy storage systems with high energy density, and large power density. However, the inherent properties of iodine such as electronic insulation and shuttle behavior of soluble iodine species affect negatively rate performance, cyclability, and self-discharge behavior of metal-iodine batteries, while the dendrite growth and metal corrosion on the anode side brings potential safety hazards and inferior durability. These problems of metal-iodine system still exist and need to be solved urgently. Herein, we summarize the research progress of metal-iodine batteries in the past decades. Firstly, the classification, design strategy and reaction mechanism of iodine electrode are briefly outlined. Secondly, the current development and protection strategy of conventional metal anodes in metal-iodine batteries are highlighted, and some potential anode materials and their design strategies are proposed. Thirdly, the key electrochemical parameters of state-of-art metal-iodine batteries are compared and analyzed to solve critical issues for realizing next-generation iodine-based energy storage systems. Therefore, the aim of this review is to promote the development of metal-iodine batteries and provide guidelines for their design.

High performance rechargeable aqueous zinc-iodine batteries via a double iodine species fixation strategy with mesoporous carbon and modified separator

With the increasing requirement for high capacity energy storage systems, a large amount of recent work has focused on the development of zinc-iodine batteries (ZIBs) on account of high energy density, fast redox kinetics, and excellent reversibility. Nevertheless, low electron conductivity, the shuttle effect, and highly soluble iodine species (I2, I-, and I3-) have impeded their widespread application. In this study, metal organic framework-5 (MOF-5)-derived mesoporous carbon (MPC) loaded iodine (MPC/I2) cathode and the single-sided ketjen black modified cotton fiber (KB@CF) separator are designed to solve the problems mentioned above. That is, the double fixation strategy using MPC and KB@CF separators for iodine species suppresses the shuttle effect. Therefore, the ZIBs constructed with the MPC/I2 cathode and the KB@CF separator can exhibit excellent electrochemical performance. At the current density of 0.1 A g-1, a high discharge specific capacity of 137 mAh g-1 is still available after 300 cycles. Meanwhile, it exhibits a low capacity decay rate at long cycling (0.030% per cycle over 2000 cycles).

Development of long lifespan high-energy aqueous organic||iodine rechargeable batteries

Rechargeable aqueous metal||I₂ electrochemical energy storage systems are a cost-effective alternative to conventional transition-metal-based batteries for grid energy storage. However, the growth of unfavorable metallic deposition and the irreversible formation of electrochemically inactive by-products at the negative electrode during cycling hinder their development. To circumvent these drawbacks, herein we propose 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) as negative electrode active material and a saturated mixed KCl/I₂ aqueous electrolyte solution. The use of these components allows for exploiting two sequential reversible electrochemical reactions in a single cell. Indeed, when they are tested in combination with an active carbon-enveloped I₂ electrode in a glass cell configuration, we report an initial specific discharge capacity of 900 mAh g⁻¹ (electrode mass of iodine only) and an average cell discharge voltage of 1.25 V at 40 A g⁻¹ and 25\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pm$$\end{document}±1 °C. Finally, we also report the assembly and testing of a PTCDI|KCl-I₂|carbon paper multilayer pouch cell prototype with a discharge capacity retention of about 70% after 900 cycles at 80 mA and 25\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\pm$$\end{document}±1 °C.

Aqueous I₂-based batteries are a promising system for cost-effective and environmentally-friendly electricity storage. Here, the authors propose a high-capacity and long-lasting aqueous I₂ battery system using an electrochemically active organic molecule at the negative electrode.

Rechargeable Iodine Batteries: Fundamentals, Advances, and Perspectives

Lattice distortion and structure collapse are two intrinsic issues of intercalative-type electrodes derived from repeated ion shuttling. In contrast, rechargeable iodine batteries (RIBs) based on the conversion reaction of iodine stand out for high reversibility and satisfying voltage output characteristics no matter when dealing with both monovalent and multivalent ions. Foreseeable performance superiorities lead to an influx of considerable focus and thus a renaissance in RIBs. This review provides a comprehensive overview of the fundamental chemistry of RIBs from the perspectives of physicochemical properties, conversion mechanism, and existing issues. Furthermore, we refine the optimization strategies for high-performance RIBs, focusing on physical adsorption and chemical interaction strengthening, electrolytes regulation, and nanoscale-iodine design. Then the pros and cons of tremendous RIBs are compared and specified. Ultimately, we conclude with remaining challenges and perspectives to our best knowledge, which may inspire the construction of next-generation RIBs.

Achieving long cycle life for all-solid-state rechargeable Li-I2 battery by a confined dissolution strategy

Rechargeable Li-I₂ battery has attracted considerable attentions due to its high theoretical capacity, low cost and environment-friendliness. Dissolution of polyiodides are required to facilitate the electrochemical redox reaction of the I₂ cathode, which would lead to a harmful shuttle effect. All-solid-state Li-I₂ battery totally avoids the polyiodides shuttle in a liquid system. However, the insoluble discharge product at the conventional solid interface results in a sluggish electrochemical reaction and poor rechargeability. In this work, by adopting a well-designed hybrid electrolyte composed of a dispersion layer and a blocking layer, we successfully promote a new polyiodides chemistry and localize the polyiodides dissolution within a limited space near the cathode. Owing to this confined dissolution strategy, a rechargeable and highly reversible all-solid-state Li-I₂ battery is demonstrated and shows a long-term life of over 9000 cycles at 1C with a capacity retention of 84.1%.

ZIF-8 derived porous carbon to mitigate shuttle effect for high performance aqueous zinc-iodine batteries

Rechargeable aqueous zinc-iodine batteries (ZIBs) with low environmental impacts and abundant natural reserves have emerged as promising electrochemical energy storage devices. However, the shuttle effect and low conductivity of the iodine species cause poor electrochemical performance and hinder their practical application. Herein, we propose a ZIF-8 derived porous carbon (ZPC) for iodine species immobilization in ZIBs. The rich porous structure and highly conductive framework of ZPC provide efficient iodine loading and allow the fast transmission of electrons. In addition, the presence of N, Zn and ZnO in the carbon framework can build chemical anchoring with the iodine species to mitigate the shuttle effect. Thus, the ZPC/I₂ cathode exhibits a reversible capacity of 156 mAh g^-1 after 100 cycles at 100 mA g^-1 and a long-term stability of 1000 cycles at a high rate. This study will open a new paradigm for devolving highly reversible ZIBs.

Iodine Redox Chemistry in Rechargeable Batteries

Halogens have been coupled with metal anodes in a single cell to develop novel rechargeable batteries based on extrinsic redox reactions. Since the commercial introduction of lithium-iodine batteries in 1972, they have shown great potential to match the high-rate performance, large energy density, and good safety of advanced batteries. With the development of metal anodes (e.g. Li, Zn), one of the actual challenges lies in the preparation of electrochemically active and reliable iodine-based cathodes to prevent self-discharge and capacity decay of the rechargeable batteries. Understanding the fundamental reactions of iodine/polyiodide and their underlying mechanisms is still highly desirable to promote the rational design of advanced cathodes for high-performance rechargeable batteries. In this Minireview, recent advances in the development of iodine-based cathodes to fabricate rechargeable batteries are summarized, with a special focus on the basic principles of iodine redox chemistry to correlate with structure-function relationships.

Redox reactions of halogens for reversible electrochemical energy storage

Rechargeable batteries based on redox reactions of halogens were summarized according to the fundamental chemistry and the underlying mechanisms, showing their potential applications.