Achieving efficient and stable blue thermally activated delayed fluorescence organic light-emitting diodes based on four-coordinate fluoroboron emitters by simple substitution molecular engineering

Achieving both high efficiency and high stability in blue thermally activated delayed fluorescence organic light-emitting diodes (TADF-OLEDs) is challenging for practical displays and lighting. Here, we have successfully developed a series of sky-blue to pure-blue emitting donor-acceptor (D-A) type TADF materials featuring a four-coordinated boron with 2,2'-(pyridine-2,6-diyl)diphenolate (dppy) ligands, i.e.1-8. Synergistic engineering of substituents on the phenyl bridge as well as the electronic properties and the attached positions of heteroatom N-donors not only enables fine-tuning of the emission colors, but also modulates the nature and energies of their triplet excited states that are important for the reverse intersystem crossing (RISC). Particularly for the compound with two methyl substituents on the phenyl bridge (compound 8), RISC is significantly facilitated through the vibronic coupling of the energetically close-lying triplet charge transfer (3CT) and the triplet local excited (3LE) states, when compared to analogue 7. Efficient sky-blue to pure-blue OLEDs with electroluminescence peaks (λ EL) at 460-492 nm have been obtained, in which ca. five-fold higher external quantum efficiencies (EQEs) of 18.9% have been demonstrated by 8 than that by 7. Moreover, ca. thirty times longer device operational half-lifetimes (LT50) of 9113 hours for 8 than that for 7 as well as satisfactory LT50 reaching 26 643 hours for 6 at an initial luminance of 100 cd m-2 have also been demonstrated. To the best of our knowledge, these results represent one of the best high-performance blue OLEDs based on tetracoordinated boron TADF emitters. Moreover, the design strategy presented here has provided an attractive strategy for enhancing the device performance of blue TADF-OLEDs.

Synthetic progress of organic thermally activated delayed fluorescence emitters via C-H activation and functionalization

Thermally activated delayed fluorescence (TADF) emitters have become increasingly prominent due to their promising applications across various fields, prompting a continuous demand for developing reliable synthetic methods to access them. This review aims to highlight the progress made in the last decade in synthesizing organic TADF compounds through C-H bond activation and functionalization. The review begins with a brief introduction to the basic features and design principles of TADF emitters. It then provides an overview of the advantages and concise development of C-H bond transformations in constructing TADF emitters. Subsequently, it summarizes both transition-metal-catalyzed and non-transition-metal-promoted C-H bond transformations used for the synthesis of TADF emitters. Finally, the review gives an outlook on further challenges and potential directions in this field.

Developing Biarylhemiboronic Esters for Biaryl Atropisomer Synthesis via Dynamic Kinetic Atroposelective Suzuki-Miyaura Cross-Coupling

We herein introduce biarylhemiboronic esters as a new type of bridged biaryl reagent for asymmetric synthesis of axially chiral biaryl structures, and the palladium-catalyzed asymmetric Suzuki-Miyaura cross-coupling of biarylhemiboronic esters is developed. This dynamic kinetic atroposelective coupling reaction exhibits high enantioselectivity, good functional group tolerance, and a broad substrate scope. The synthetic application of the current method was demonstrated by transformations of the product and a programmed synthesis of chiral polyarene. Preliminary mechanistic studies suggested that the reaction proceeded via an enantio-determining dynamic kinetic atroposelective transmetalation step.

Heteroatom-boron-heteroatom-doped π-conjugated systems: structures, synthesis and photofunctional properties

The potency of heteroatom-doping in reshaping optoelectronic properties arises from the distinct electronegativity variations between heteroatoms and carbon atoms. By incorporating two heteroatoms with differing electronegativities (e.g., B = N), not only is the architectural coherence of π-conjugated systems retained, but also dipolar traits are introduced, accompanied by unique intermolecular interactions absent in their all-carbon analogs. Another burgeoning doping strategy, featuring the heteroatom-boron-heteroatom motif (X-B-X, where X = N, O), has captured growing attention. This configuration's coexistence of the boron-heteroatom unit and an isolated heteroatom stimulates mutual modulation in the dipole of the boron-heteroatom unit and the heteroatom's electronegativity. In this Feature article, we present an encompassing survey of XBX-doped π-conjugated systems, elucidating how the integration of the X-B-X unit induces transformative structural and property changes within π-conjugated systems.

Multiple donor-acceptor design for highly luminescent and stable thermally activated delayed fluorescence emitters

A considerable variety of donor-acceptor (D-A) combinations offers the potential for realizing highly efficient thermally activated delayed fluorescence (TADF) materials. Multiple D-A type compounds are one of the promising families of TADF materials in terms of stability as well as efficiencies. However, those emitters are always composed of carbazole-based donors despite a wide choice of moieties used in linearly linked single D-A molecules. Herein, we developed a multiple D-A type TADF compound with two distinct donor units of 9,10-dihydro-9,9-dimethylacridine (DMAC) and carbazole as the hetero-donor design. The new emitter exhibits high photoluminescence quantum yield (PLQY) in various conditions including polar media blend and high concentrations. Organic light-emitting diodes (OLEDs) showed a reasonably high external quantum efficiency (EQE). In addition, we revealed that the multiple-D-A type molecules showed better photostability than the single D-A type molecules, while the operational stability in OLEDs involves dominant other factors.

Development of Pure Green Thermally Activated Delayed Fluorescence Material by Cyano Substitution

Multiple resonance (MR)-effect-induced thermally activated delayed fluorescence (TADF) materials have garnered significant attention because they can achieve both high color purity and high external quantum efficiency (EQE). However, the reported green-emitting MR-TADF materials exhibit broader emission compared to those of blue-emitting ones and suffer from severe efficiency roll-off due to insufficient rate constants of reverse intersystem crossing process (k_RISC ). Herein, a pure green MR-TADF material (ν-DABNA-CN-Me) with high k_RISC of 10⁵ s^-1 is reported. The key to success is introduction of cyano groups into a blue-emitting MR-TADF material (ν-DABNA), which causes remarkable bathochromic shift without a loss of color purity. The organic light-emitting diode employing it as an emitter exhibits green emission at 504 nm with a small full-width at half-maximum of 23 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.13, 0.65). The device achieves a high maximum EQE of 31.9% and successfully suppresses the efficiency roll-off at a high luminance.

Molecular Vibration Accelerates Charge Transfer Emission in a Highly Twisted Blue Thermally Activated Delayed Fluorescence Material

In the development of new organic light-emitting diodes, thermally activated delayed fluorescence (TADF) materials have drawn interest because of their ability to upconvert electrically generated triplet excitons into singlets. Efficient TADF requires a well-balanced large transition dipole moment (μ) between the lowest excited singlet state (S₁) and the ground state (S₀) and a small energy splitting (ΔE_ST) between S₁ and the lowest triplet state (T₁). However, a number of highly twisted donor-acceptor-type TADF molecules have been reported to exhibit high performance in OLEDs, although these molecules may sacrifice μ in exchange for a very small ΔE_ST. Here, we theoretically investigate the origin of efficient emission from a perpendicularly twisted blue emitter, MA-TA. In this system, the μ value almost vanishes in the static approximation; however, vibrational contributions increase μ considerably. Hence, we show that the dynamics of excitons have a critical role in such TADF systems.

Highly Colored Boron-Doped Thiazolothiazoles from the Reductive Dimerization of Boron Isothiocyanates

Reduction of (CAAC)BBr2 (NCS) (CAAC=cyclic alkyl(amino)carbene) in the presence of a Lewis base L yields tricoordinate (CAAC)LB(NCS) borylenes which undergo reversible E/Z-isomerization. The same reduction in the absence of L yields deep blue, bis(CAAC)-stabilized, boron-doped, aromatic thiazolothiazoles resulting from the dimerization of dicoordinate (CAAC)B(NCS) borylene intermediates.

OBO-Fused Benzo[fg]tetracene as Acceptor With Potential for Thermally Activated Delayed Fluorescence Emitters

Six luminophores bearing an OBO-fused benzo[fg]tetracene core as an electron acceptor were designed and synthesized. The molecular structures of three molecules (PXZ-OBO, 5PXZ-OBO, 5DMAC-OBO) were determined by single crystal X-ray diffraction studies and revealed significant torsion between the donor moieties and the OBO acceptor with dihedral angles between 75.5 and 86.2°. Photophysical studies demonstrate that blue and deep blue emission can be realized with photoluminescence maxima (λ_PL) ranging from 415 to 480 nm in mCP films. The emission energy is modulated by simply varying the strength of the donor heterocycle, the number of donors, and their position relative to the acceptor. Although the DMAC derivatives show negligible delayed emission because of their large singlet-triplet excited state energy difference, ΔE_ST, PXZ-based molecules, especially PXZ-OBO with an experimental ΔE_ST of 0.25 eV, demonstrate delayed emission in blend mCP films at room temperature, which suggests triplet exciton harvesting occurs in these samples, potentially by thermally activated delayed fluorescence.

6,12-Dihydro-6,12-diboradibenzo[def,mno]chrysene: A Doubly Boron-Doped Polycyclic Aromatic Hydrocarbon for Organic Light Emitting Diodes by a One-Pot Synthesis

One-pot synthesis of a new doubly boron-doped polycyclic aromatic hydrocarbon of 6,12-dimesityl-6,12-dihydro-6,12-diboradibenzo[def,mno]chrysene (MDBDBC) was reported. MDBDBC features a rigid planar electron-deficient core structure and demonstrates good chemical and thermal stabilities. A low-lying LUMO of -3.53 eV, a low locally excited triplet energy of 1.92 eV, as well as green electroluminescence with maximum EQE of 4.9% were found for MDBDBC, suggesting its potential as an n-type unit for future organic light emitting diode applications.

Recent Advancement in Boron-Based Efficient and Pure Blue Thermally Activated Delayed Fluorescence Materials for Organic Light-Emitting Diodes

In the last few years, electron-deficient materials have been actively researched for application in organic light-emitting diode (OLED) as dopant and electron-transporting materials. The boron-containing materials are interesting as they give good emissive properties in solid state with an electron-accepting character. Recently, many boron-containing materials are used as emissive materials for thermally activated delayed fluorescence (TADF) OLED applications. In this review, boron acceptor-based push-pull small molecules used for application in blue TADF OLEDs are reviewed, covering their different types of acceptor, molecular design, structure-property relation, material properties, and device properties. Also, the importance of boron acceptors to address the key issue of blue TADF OLEDs is discussed.

Four-Coordinate Boron Emitters with Tridentate Chelating Ligand for Efficient and Stable Thermally Activated Delayed Fluorescence Organic Light-Emitting Devices

A new class of four-coordinate donor-acceptor fluoroboron-containing thermally activated delayed fluorescence (TADF) compounds bearing a tridentate 2,2'-(pyridine-2,6-diyl)diphenolate (dppy) ligand has been successfully designed and synthesized. Upon varying the donor moieties from carbazole to 10H-spiro[acridine-9,9'-fluorene] to 9,9-dimethyl-9,10-dihydroacridine, these boron derivatives exhibit a wide range of emission colors spanning from blue to yellow with a large spectral shift of 2746 cm^-1 , with high PLQYs of up to 96 % in the doped thin film. Notably, vacuum-deposited organic light-emitting devices (OLEDs) made with these boron compounds demonstrate high performances with the best current efficiencies of 55.7 cd A^-1 , power efficiencies of 58.4 lm W^-1 and external quantum efficiencies of 18.0 %. More importantly, long operational stabilities of the green-emitting OLEDs based on 2 with half-lifetimes of up to 12 733 hours at an initial luminance of 100 cd m^-2 have been realized. This work represents for the first time the design and synthesis of tridentate dppy-chelating four-coordinate boron TADF compounds for long operational stabilities, suggesting great promises for the development of stable boron-containing TADF emitters.

Aryl-aryl coupling in a polycyclic aromatic hydrocarbon with embedded tetracoordinate boron centre

The addition of 2 eq. of MesLi to the biphenylene-containing 9,10-dihydro-9,10-diboraanthracene (DBA) 2 results in the formation of the corresponding oxaboraphenanthrene 3 after column chromatography under ambient conditions. In the initial step, the anionic B-Mes monoadduct of 2 is generated, which eliminates a formal [Mes₂B:]^- ion with concomitant C-C-bond formation (room temperature, 18 h). The resulting biphenylene-containing borafluorene 4 is still sufficiently Lewis acidic to add the second equivalent of MesLi ([4Mes]^-). Using pristine 9-mesityl-9-borafluorene as a model system, we confirmed that both 4 and [4Mes]^- should be capable of inserting an oxygen atom to furnish the observed oxaboraphenanthrene scaffold. The biphenylene-containing oxaboraphenanthrene 3 is a yellow compound with an absorption maximum at λ_max = 450 nm. Similar to its DBA analogue 2, 3 shows no photoluminescence.

Positive charge-dependent cell targeted staining and DNA detection

Fluorescence probes containing pyridinium compounds and different negative ions with the applications of specific tracing of different cell organelles and DNA detection!