Structural insight into piezo-solvatochromism of Reichardt's dye

To date, accurate modelling of the solvation process is challenging, often over-simplifying the solvent-solute interactions. The interplay between the molecular arrangement associated with the solvation process and crystal nucleation has been investigated by analysis of the piezo-solvatochromic behaviour of Reichardt's dye, ET(1), in methanol, ethanol and acetone under high pressure. High-pressure single-crystal X-ray diffraction and UV-Vis spectroscopy reveal the impact of solute-solvent interactions on the optical properties of ET(1). The study underscores the intricate relationship between solvent properties, molecular conformation and crystal packing. The connection between liquid and solid phases emphasizes the capabilities of high-pressure methods for expanding the field of crystal engineering. The high-pressure environment allowed the determination of the crystal structures reported here that are built from organic molecules fourfold solvated with ethanol or methanol: ET(1)·4CH3OH and ET(1)·4C2H5OH·H2O. The observed piezo-solvatochromic effects highlight the potential of ET(1) in nonlinear optoelectronics and expand the application of solvatochromic chemical indicators to pressure sensors.

Relating solvatochromism and solvatomorphism in organic dyes using high pressure

By using complementary experimental methods including in situ high-pressure single-crystal X-ray diffraction and UV-Vis spectroscopy, the intricate connection between solvatochromism and solvatomorphism has been elucidated in a recent publication [Sobczak & Katrusiak (2024). IUCrJ, 11, 528-537]. The connection was demonstrated for an important pigment - Reichardt's dye - with potential applications in nonlinear optoelectronics and molecular pressure sensor development.

Effect of organic acids on the solid-state polymorphic phase transformation of piracetam

Metastable polymorphs are frequently used in oral solid dosage forms to enhance the absorption of poorly water-soluble drug compounds. However, the solid phase transformation from the metastable polymorph to the thermodynamically stable polymorph during manufacturing or storage poses a major challenge for product development and quality control. Here, we report that low-content organic acids can exhibit distinct effects on the solid-state polymorphic phase transformation of piracetam (PCM), a nootropic drug used for memory enhancement. The addition of 1 mol% citric acid (CA) and tricarballylic acid (TA) can significantly inhibit the phase transformation of PCM Form I to Form II, while glutaric acid (GA) and adipic acid (AA) produce a minor effect. A molecular simulation shows that organic acid molecules can adsorb on the crystal surface of PCM Form I, thus slowing the movement of molecules from the metastable form to the stable form. Our study provides deeper insights into the mechanisms of solid-state polymorphic phase transformation of drugs in the presence of additives and facilitates opportunities for controlling the stability of metastable pharmaceuticals.

A first-order phase transition in Blatter's radical at high pressure

The crystal structure of Blatter's radical (1,3-diphenyl-1,4-dihydrobenzo[e][1,2,4]triazin-4-yl) has been investigated between ambient pressure and 6.07 GPa. The sample remains in a compressed form of the ambient-pressure phase up to 5.34 GPa, the largest direction of strain being parallel to the direction of π-stacking interactions. The bulk modulus is 7.4 (6) GPa, with a pressure derivative equal to 9.33 (11). As pressure increases, the phenyl groups attached to the N1 and C3 positions of the triazinyl moieties of neighbouring pairs of molecules approach each other, causing the former to begin to rotate between 3.42 to 5.34 GPa. The onset of this phenyl rotation may be interpreted as a second-order phase transition which introduces a new mode for accommodating pressure. It is premonitory to a first-order isosymmetric phase transition which occurs on increasing pressure from 5.34 to 5.54 GPa. Although the phase transition is driven by volume minimization, rather than relief of unfavourable contacts, it is accompanied by a sharp jump in the orientation of the rotation angle of the phenyl group. DFT calculations suggest that the adoption of a more planar conformation by the triazinyl moiety at the phase transition can be attributed to relief of intramolecular H...H contacts at the transition. Although no dimerization of the radicals occurs, the π-stacking interactions are compressed by 0.341 (3) Å between ambient pressure and 6.07 GPa.

Study elastic properties of the leucine and isoleuicine from first principles calculations

I studied the elastic properties of crystalline L- and DL-forms of leucine and isoleucine within the framework of density functional theory with van der Waals interactions. The energy gaps of the considered crystals are 7.48-7.60 eV. Chiral molecules have the same chemical composition. Therefore, the study of crystalline amino acids provides a better understanding of how the structure of molecules affects mechanical properties of molecular crystals. Complete set of elastic constants for L-leucine, L-isoleucine, DL-leucine and DL-isoleucine were calculated. Linear compressibility of crystals has high anisotropy. The crystalline L- and DL-forms of leucine and isoleucine have different mechanical properties. Linear compressibility has a negative value for DL-isoleucine. My calculations predict that L-leucine and L-isoleucine are ductile compounds, while DL-leucine and DL-isoleucine are brittle compounds.

Action of Mechanical Forces on Polymerization and Polymers

In this review, we summarize recent developments in the field of the mechanochemistry of polymers. The aim of the review is to consider the consequences of mechanical forces and actions on polymers and polymer synthesis. First, we review classical works on chemical reactions and polymerization processes under strong shear deformations. Then, we analyze two emerging directions of research in mechanochemistry-the role of mechanophores and, for the first time, new physical phenomena, accompanying external impulse mechanical actions on polymers. Mechanophores have been recently proposed as sensors of fatigue and cracks in polymers and composites. The effects of the high-pressure pulsed loading of polymers and composites include the Dzyaloshinskii-Moriya effect, emission of superradiation and the formation of metal nanoparticles. These effects provide deeper insight into the mechanism of chemical reactions under shear deformations and pave the way for further research in the interests of modern technologies.

Stochastic hydration of a high-nitro-gen-content molecular compound recrystallized under pressure

Partial hydration of organic compounds can be achieved by high-pressure crystallization. This has been demonstrated for the high-nitro-gen-content compound 6-chloro-1,2,3,4-tetrazolo[1,5-b]pyridazine (C4H2N5Cl), which becomes partly hydrated by isochoric crystallizations below 0.15 GPa. This hydrate, C4H2N5Cl·xH2O, is isostructural with the ambient-pressure phase α of C4H2N5Cl, but the crystal volume is somewhat larger than that of the anhydrate. At 0.20 GPa, the α-C4H2N5Cl anhydrate phase transforms abruptly into a new higher-symmetry phase, α'; the transformation is clearly visible due to a strong contraction of the crystals. The hydrate α-C4H2N5Cl·xH2O can also be isothermally compressed up to 0.30 GPa before transforming to the α'-C4H2N5Cl·xH2O phase. The isochoric recrystallization of C4H2N5Cl above 0.18 GPa yields a new anhydrous phase β, which, on releasing pressure, transforms back to the α phase below 0.15 GPa. The structural transition from the α to the β phase is destructive for the single crystal and involves a large volume drop and significant elongation of all the shortest intermolecular distances which are the CH⋯N and CH⋯Cl hydrogen bonds, as well as the N⋯N contacts. The α-to-α' phase transition increases the crystal symmetry in the subgroup relation; however, there are no structural nor symmetry relations between phases α and β.

Sustainable solid form screening: mechanochemical control over nucleobase hydrogen-bonded organic framework polymorphism

The choice is yours! Liquid-assisted grinding can be used to control HOF polymorphism.

Low Temperature and High-Pressure Study of Bending L-Leucinium Hydrogen Maleate Crystals

The polymorphism of molecular crystals is a well-known phenomenon, resulting in modifications of physicochemical properties of solid phases. Low temperatures and high pressures are widely used to find phase transitions and quench new solid forms. In this study, L-Leucinium hydrogen maleate (LLHM), the first molecular crystal that preserves its anomalous plasticity at cryogenic temperatures, is studied at extreme conditions using Raman spectroscopy and optical microscopy. LLHM was cooled down to 11 K without any phase transition, while high pressure impact leads to perceptible changes in crystal structure in the interval of 0.0–1.35 GPa using pentane-isopentane media. Surprisingly, pressure transmitting media (PTM) play a significant role in the behavior of the LLHM system at extreme conditions—we did not find any phase change up to 3.05 GPa using paraffin as PTM. A phase transition of LLHM to amorphous form or solid–solid phase transition(s) that results in crystal fracture is reported at high pressures. LLHM stability at low temperatures suggests an alluring idea to prove LLHM preserves plasticity below 77 K.

High-pressures study by Raman spectroscopy and DFT calculations of L-tyrosine hydrobromide crystal

The high-pressure Raman spectra of L-tyrosine hydrobromide crystal (LTHBr) were obtained from 1.0 atm to 8.1 GPa in the 100-3200 cm^-1 spectral region. The structural conformation and dimensions of the monoclinic unit cell were estimated using the powder X-ray diffraction (PXRD) method and Rietveld refinement using the GSAS program. At atmospheric pressure, the Raman spectrum was obtained in the spectral range of 100-3200 cm^-1 and the assignment of the normal modes based on density functional theory calculations was provided. Large wavenumber shifts of modes at 106, 123, and 157 were observed, which were interpreted as the large displacement of the atoms, making the molecule a flexible structure. The change in the slope (dɷ / dP) of these bands between the pressures of 3.0 and 4.0 GPa and the appearance of a mode of low wavenumber indicate the occurrence of a structural phase transition. A band initially observed at 181 cm^-1 in the spectrum recorded at 0.7 GPa change the relative intensity with a band at 280 cm^-1 (recorded at 5.8 GPa), indicating a conformational transition. In the region of the internal modes, the spectra show changes that reinforce the conformational phase transition since the bands initially at 1247 and 1264 cm^-1 observed at 1.0 GPa have their intensities reversed, and at 3.0 GPa it is observed the fusion of the bands at 1264 and 1290 cm^-1 (values recorded at ambient pressure). Thus, we can assume that the LTHBr crystal has undergone a structural phase transition and a conformational phase transition in the pressure range investigated.

Stepwise Stress-Induced Transformations of Metal-Organic Polyhedral Cluster-Based Assemblies: Where Conformational and Supramolecular Features Meet

Understanding the factors governing the formation of supramolecular structures and phase transitions between various forms of molecular crystals is pivotal for developing dynamic, stimuli-responsive materials and polymorph-controlled syntheses. Here, we investigate the pressure-induced dynamic of both the intrinsic molecular structure and the supramolecular network of a predesigned polyhedral oxo-centered zinc cluster incorporating monoanionic N,N'-diphenylformamidinate and featuring N-bonded phenyl groups in close proximity to the primary coordination sphere. We demonstrate that the model oxo cluster is prone to undergoing pressure-induced conformational transformations of the secondary coordination sphere and simultaneous stepwise (initially every second polyhedral molecule undergoes the conformational transformations) and reversible transitions from an ambient phase α to high-pressure phases β and γ, as single-crystal-to-single-crystal events. The observed phase transitions illustrate the key role of an interplay between the low-energy conformation perturbations and cooperative intra- and intermolecular noncovalent interactions.

High-pressure reversibility in a plastically flexible coordination polymer crystal

Single crystals which exhibit mechanical flexibility are promising materials for advanced technological applications. Before such materials can be used, a detailed understanding of the mechanisms of bending is needed. Using single crystal X-ray diffraction and microfocus Raman spectroscopy, we study in atomic detail the high-pressure response of the plastically flexible coordination polymer [Zn(μ-Cl)₂(3,5-dichloropyridine)₂]_n (1). Contradictory to three-point bending, quasi-hydrostatic compression of (1) is completely reversible, even following compression to over 9 GPa. A structural phase transition is observed at ca. 5 GPa. DFT calculations show this transition to result from the pressure-induced softening of low-frequency vibrations. This phase transition is not observed during three-point-bending. Microfocus synchrotron X-ray diffraction revealed that bending yields significant mosaicity, as opposed to compression. Hence, our studies indicate of overall disparate mechanical responses of bulk flexibility and quasi-hydrostatic compression within the same crystal lattice. We suspect this to be a general feature of plastically bendable materials.

Mechanically flexible single crystals are promising materials for advanced technological applications. Here, the authors study the high pressure response of a plastically flexible coordination polymer and provide indication of an overall disparate mechanical response of bulk flexibility and quasi-hydrostatic compression within the same crystal lattice.

Structural reasons for the formation of multicomponent products and the influence of high pressure

(S)-(-)-1-Phenylethanaminium 4-(2,4,6-triisopropylbenzoyl)benzoate (S-PEATPBB) undergoes a photochemical reaction in its crystalline form upon UV irradiation and forms three different products: the first product is the result of a Yang cyclization with the participation of the δ-H atom of o-isopropyl (product D) and the second and third products are obtained via a Norrish-Yang reaction with the involvement of the γ-H atom of 2-isopropyl (product P) and 6-isopropyl (product Z). These products are formed in different proportions (D > P >> Z). The path and kinetics of the reaction were monitored step-by-step using crystallographic methods, both under ambient and high-pressure conditions. The reactivity of S-PEATPBB depends strongly on the geometry of the reaction centre and the volume of the reaction cavity. Due to the geometrical preferences making the cyclization reaction easier to proceed, product D dominates over the other products, while the formation of product Z becomes difficult or almost impossible at high pressure. The reaction proceeds with an increase of the unit-cell volume, which, suppressed by high pressure, results in a significant decrease of the reaction rate. The crystal lattice of S-PEATPBB shows high elasticity. The quality of the partially reacted crystal remains the same after decompression from 0.75 GPa to 0.1 MPa.

Tribochemistry, Mechanical Alloying, Mechanochemistry: What is in a Name?

Over the decades, the application of mechanical force to influence chemical reactions has been called by various names: mechanochemistry, tribochemistry, mechanical alloying, to name but a few. The evolution of these terms has largely mirrored the understanding of the field. But what is meant by these terms, why have they evolved, and does it really matter how a process is called? Which parameters should be defined to describe unambiguously the experimental conditions such that others can reproduce the results, or to allow a meaningful comparison between processes explored under different conditions? Can the information on the process be encoded in a clear, concise, and self-explanatory way? We address these questions in this Opinion contribution, which we hope will spark timely and constructive discussion across the international mechanochemical community.

Semi-empirical and ab initio calculations for crystals under pressure at fixed temperatures: the case of guanidinium perchlorate

A simple semi-empirical approach is proposed to calculate structure and properties of crystals under pressure at fixed temperatures. The computed semi-empirical pressure dependencies for guanidinium perchlorate are in good agreement with available experimental data. Ab initio results within quasi-harmonic approximation for guanidinium perchlorate are also presented.

Mechanical-Bending-Induced Fluorescence Enhancement in Plastically Flexible Crystals of a GFP Chromophore Analogue

Single crystals of optoelectronic materials that respond to external stimuli, such as mechanical, light, or heat, are immensely attractive for next generation smart materials. Here we report single crystals of a green fluorescent protein (GFP) chromophore analogue with irreversible mechanical bending and associated unusual enhancement of the fluorescence, which is attributed to the strained molecular packing in the perturbed region. Soft crystalline materials with such fluorescence intensity modulations occurring in response to mechanical stimuli under ambient pressure conditions will have potential implications for the design of technologically relevant tunable fluorescent materials.

Mechanical Actuation and Patterning of Rewritable Crystalline Monomer-Polymer Heterostructures via Topochemical Polymerization in a Dual-Responsive Photochromic Organic Material

The dark-orange monomer single crystals of 1,1'-dioxo-1H-2,2'-biindene-3,3'-diyldidodecanoate (BIT-dodeca₂) convert to a transparent single-crystalline polymer (PBIT-dodeca₂) material via a single-crystal-to-single-crystal (SCSC) polymerization reaction under sunlight, which then undergoes reverse thermal transformation into BIT-dodeca₂ single crystals, leading to reversible photo-/thermochromism, coupled with mechanical actuation. We exploit the properties of this unique material to demonstrate the formation of monomer-polymer heterostructures in selected regions of single crystals with micrometer-scale precision using a laser. This is the first example of heterostructure patterning involving monomer-polymer domains in single crystals. We reveal that the speed of photomechanical bending induced by the polymerization reaction in this example is comparable to those of the well-known diarylethene derivatives, in which electrocyclic ring-closing-ring-opening reactions operate. Furthermore, we characterize the distinct mechanical properties of the monomer and polymer using a quantitative nanoindentation technique as well as demonstrate photopatterning on a monomer-coated paper for potential use in security devices. These crystals with several advantages, such as photomechanical bending (weight lifting) even when the crystal size is large, responsiveness to both UV and visible light, distinct solubilities (the polymer is insoluble, whereas the monomer is soluble in most organic solvents) and colors, provide unique opportunities for their use at different length scales of the sample (μm to mm) for various purposes.

Does Pressure Break Mirror-Image Symmetry? A Perspective and New Insights

This paper is aimed at dissecting and discussing the effect of high pressure on chirogenesis, thus unveiling the role of this universal force in astrochemical and primeval Darwinian scenarios. The first part of this contribution revisits the current status and recent experiments, most dealing with crystalline racemates, for which generation of metastable conglomeratic phases would eventually afford spontaneous resolution and hence enantioenriched mixtures. We then provide an in-depth thermodynamic analysis, based on previous studies of non-electrolyte solutions and dense mixtures accounting for the existence of positive excess volume upon mixing, to simulate the mirror symmetry breaking, the evolution of entropy production and dissipation due to enantiomer conversion. Results clearly suggest that mirror symmetry breaking under high pressure may be a genuine phenomenon and that enantioenrichment from initial scalemic mixtures may also take place.

Pancake-bonding of semiquinone radicals under variable temperature and pressure conditions

The effects of temperature (100-370 K) and pressure (0-6 GPa) on the non-localized two-electron multicentric covalent bonds (`pancake bonding') in closely bound radical dimers were studied using single-crystal X-ray diffraction on a 4-cyano-N-methylpyridinium salt of 5,6-dichloro-2,3-dicyanosemiquinone radical anion (DDQ) as the sample compound. On cooling, the anisotropic structural compression was accompanied by continuous changes in molecular stacking; the discontinuities in the changes in volume and b and c cell parameters suggest that a phase transition occurs between 210 and 240 K. At a pressure of 2.55 GPa, distances between radical dimers shortened to 2.9 Å, which corresponds to distances observed in extended π-bonded polymers. Increasing pressure further to 6 GPa reduced the interplanar separation of the radicals to 2.75 Å. This may indicate that the covalent component of the interaction significantly increased, in accordance with the results of DFT calculations reported elsewhere [Molčanov et al. (2019), Cryst. Growth Des. 19, 391-402].

Manipulation of Pharmaceutical Polymorphic Transformation Process Using Excipients

BACKGROUND

In the pharmaceutical field, it is vital to ensure a consistent product containing a single solid-state form of the active pharmaceutical ingredient (API) in the drug product. However, some APIs are suffering from the risk of transformation of their target forms during processing, formulation and storage.

METHODS

The purpose of this review is to summarize the relevant category of excipients and demonstrate the availability and importance of using excipients as a key strategy to manipulate pharmaceutical polymorphic transformation.

RESULTS

The excipient effects on solvent-mediated phase transformations, solid-state transitions and amorphous crystallization are significant. Common pharmaceutical excipients including amino acids and derivatives, surfactants, and various polymers and their different manipulation effects were summarized and discussed.

CONCLUSION

Appropriate use of excipients plays a role in manipulating polymorphic transformation process of corresponding APIs, with a promising application of guaranteeing the stability and effectiveness of drug dosage forms.

Physicochemical properties of L- and DL-valine: first-principles calculations

At present, physicochemical properties of amino acid molecular crystals are of the utmost interest. The compounds where molecules have different chirality are the focus of particular interest. This paper, presents a study on the structural and electronic properties of crystalline L- and DL-valine within the framework of density functional theory including van der Waals interactions. The results of this study showed that electronic properties of the two forms of valine are similar at zero pressure. Pressure leads to different responses in these crystals which is manifested as various deformations of molecules. The pressure effect on the infrared spectra and distribution of electron density of L- and DL-valine has been studied.

A new high-pressure benzocaine polymorph - towards understanding the molecular aggregation in crystals of an important active pharmaceutical ingredient (API)

Benzocaine (BZC), an efficient and highly permeable anaesthetic and an active pharmaceutical ingredient of many commercially available drugs, was studied under high pressure up to 0.78 GPa. As a result, new BZC polymorph (IV) was discovered. The crystallization of polymorph (IV) can be initiated by heating crystals of polymorph (I) at a pressure of at least 0.45 GPa or by their compression to 0.60 GPa. However, no phase transition from polymorph (I) to (IV) was observed. Although polymorph (IV) exhibits the same main aggregation motif as in previously reported BZC polymorphs (I)-(III), i.e. a hydrogen-bonded ribbon, its molecular packing and hydrogen-bonding pattern differ considerably. The N-H...N hydrogen bonds joining parallel BZC ribbons in crystals at ambient pressure are eliminated in polymorph (IV), and BZC ribbons become positioned at an angle of about 80°. Unfortunately, crystals of polymorph (IV) were not preserved on pressure release, and depending on the decompression protocol they transformed into polymorph (II) or (I).

Toward materials-by-design: achieving functional materials with physical and chemical effects

Advances in renewable and sustainable energy technologies critically depend on our ability to rationally design and process target materials with optimized performances. Advanced material design and discovery are ideally involved in material prediction, synthesis and characterization. Control of material crystallization enables the rational design and discovery of novel functional inorganic materials in multi-scale. Material processing can be adjusted by various physical fields and chemical effects at different energy states. Material microstructure, architecture and functionality can thus be modified by multiple design methodologies. In this review, we show typical examples using physical and chemical methods to shape inorganic functional materials and evaluate their specific applications in Na-air batteries, Li-ion batteries and supercapacitors. Furthermore, this review also provides insight into the understanding of synthesis-structure relationship of inorganic functional materials.

Effects of Microstructure and Sample's Surface to Volume Ratio on Pressure-Induced Nucleation and Transformation to Crystalline and Apparently Amorphous Solids

Heterogeneous nucleation in a polycrystalline solid occurs (i) at the surface of its container, (ii) at its microstructural sites, namely, grain boundaries, grain junctions, and intergrain-strain regions, and (iii) at the defect sites, namely, dislocations, vacancies, and stacking faults (planar defects) in its single crystal grains. We analyze their thermodynamic and kinetic effects in terms of classical nucleation theory by taking into account (a) the increase in Gibbs free energy, G, due to the lattice misfit of the nuclei forming in the parent phase and (b) the decrease in G due to the angle subtended by the nucleus on the external surface, grain boundaries, and grain junctions. Hence we deduce that several combinations of nucleation sites in different materials and also in different polycrystalline samples of the same material may produce the same energy barrier against nucleation and overall growth. The overall nucleation and growth rates are dependent upon the surface to volume ratio, χ, of a sample in a vessel and the vessel's material. Pressurizing a crystalline solid is known to produce either its polymorphic crystal form or a solid that shows no Bragg peaks and appears amorphous. We argue that when self-diffusion rate becomes slower than the pressurizing rate, (dP/dt)_T, a multiplicity of states nucleating at different sites become kinetically frozen on their path to crystal growth. In such a case, the transformed solid would appear amorphous. A solid of high χ would transform to a polymorph when (dP/dt)_T is low and to a state that appears amorphous when (dP/dt)_T is high. Known studies of 0.08-0.1 cm³ volume samples in diamond-anvil high pressure cells provide qualitative evidence of formation of both crystal polymorphs and apparently amorphous solids. Methods are suggested for observing such an occurrence in large polycrystalline samples.

Mechanomagnetics in Elastic Crystals: Insights from [Cu(acac)2 ]

We predict that the magnetic properties of [Cu(acac)₂ ], an elastically flexible crystal, change drastically when the crystal is bent. It is found that unbent [Cu(acac)₂ ] is an almost perfect Tomonaga-Luttinger liquid. Broken-symmetry density-functional calculations reveal that the magnetic exchange interactions along the chains are an order of magnitude larger than the interchain exchange. The geometrically frustrated interchain interactions cannot magnetically order the material at any experimentally accessible temperature. The ordering temperature (T_N ), calculated from the chain-random-phase approximation, increases by 24 orders of magnitude when the material is bent. We demonstrate that geometric frustration both suppresses T_N and enhances the sensitivity of T_N to bending. In [Cu(acac)₂ ], T_N is extremely sensitive to bending but remains too low for practical applications, even when bent. Partially frustrated materials could achieve the balance of high T_N and good sensitivity to bending required for practical applications of mechanomagnetic elastic crystals.

Structure and piezochromism of pyrene-1-carbaldehyde at high pressure

The crystal structure of pyrene-1-carbaldehyde (PA), a model polyaromatic hydrocarbon, highly luminescent in the solid state and crystallizing in the triclinic system, has been re-determined at several pressures ranging from atmospheric up to 3 GPa using a diamond anvil cell. A `multi-crystal' approach was used in crystal structure determination, significantly improving completeness of X-ray diffraction data attainable for such a low-symmetry system. The crystal structure consists of infinite π-stacks of PA molecules with discernible dimers, which resemble aggregates formed by pyrene derivatives in solution as well as in the solid state. A series of measurements showed that the average inter-planar distance between individual molecules within π-stacks decreases with pressure in the investigated range. This results in piezochromic properties of PA: a significant sample color change as well as a red-shift of fluorescence with pressure, as studied with UV-vis spectroscopy. Periodic DFT calculations allowed us to relate the variations in the crystal structure with pressure to the changes in the electronic structure of this material.

A large anisotropic plasticity of L-leucinium hydrogen maleate preserved at cryogenic temperatures

L-Leucinium hydrogen maleate crystals are very plastic at ambient conditions. Here it is shown that this plasticity is preserved at least down to 77 K. The structural changes in the temperature range 293-100 K were followed in order to rationalize the large anisotropic plasticity in this compound. To the best of our knowledge, this is the first reported example of an organic compound remaining so plastic at cryogenic conditions.

Pressure-Dependent Structural and Luminescence Properties of 1-(Pyren-1-yl)but-2-yn-1-one

The crystal structure of 1-(pyren-1-yl)but-2-yn-1-one (1a, a polynuclear aromatic hydrocarbon displaying enhanced luminescence in the solid state, has been re-determined at several pressures ranging from atmospheric up to 3 GPa using a Diamond Anvil Cell (DAC). These experiments were augmented by periodic DFT calculations at pressures up to 4.4 GPa. UV-Vis fluorescence of 1a at non-ambient pressures has also been investigated. The crystal structure consists of infinite π-stacks of anti-parallel 1a molecules with discernible dimers, which may exemplify aggregates formed by pyrene derivatives in solution and thin films, and is predominantly stabilized by dispersion. The average inter-planar distance between individual molecules within π-stacks decreases with pressure in the investigated range. This results in piezochromic properties of 1a: a red-shift of sample color, as well as a bathochromic shift of fluorescence with pressure (by ca. 100 nm at 3.5 GPa). Two-component fluorescence spectra support the hypothesis that at least two types of excimers are involved in the electronic excitation processes in crystalline 1a.

The nature of the chemical bond in oxyanionic crystals based on QTAIM topological analysis of electron densities

The QTAIM topological analysis of the calculated electron densities in oxyanionic crystals revealed the covalency criteria for metal–oxygen and hydrogen bonds.

Crystal morphology fixed by interplay of π-stacking and hydrogen bonds – the case of 1-hydroxypyrene

Crystal structure of 1-hydroxypyrene has been determined and its luminescence in the solid state described. An interplay of π-stacking and H-bonds results in a conserved morphology and great flexibility of the crystals. This crystal structure can be described as a set of ‘molecular springs’.

Dielectric properties and the role of grain boundaries in polycrystalline tetracene at high pressures

Dielectric properties and the role of grain boundaries in polycrystalline tetracene under pressure were investigated using impedance and computational methods.