Emulsifying properties of water-soluble proteins extracted from the microalgae Chlorella sorokiniana and Phaeodactylum tricornutum

Unconventional sourced proteins in 3D and 4D food printing: Is it the future of food processing?

Following consumer trends and market needs, the food industry has expanded the use of unconventional sources to obtain proteins. In parallel, 3D and 4D food printing have emerged with the potential to enhance food processing. While 3D and 4D printing technologies show promising prospects for improving the performance and applicability of unconventional sourced proteins (USP) in food, this combination remains relatively unexplored. This review aims to provide an overview of the application of USP in 3D and 4D printing, focusing on their primary sources, composition, rheological, and technical-functional properties. The drawbacks, challenges, potentialities, and prospects of these technologies in food processing are also examined. This review underscores the current necessity for greater regulation of food products processed by 3D and 4D printing. The data presented here indicate that 3D and 4D printing represent viable, sustainable, and innovative alternatives for the food industry, emphasizing the potential for further exploration of 4D printing in food processing. Additional studies are warranted to explore their application with unconventional proteins.

Leveraging microalgae as a sustainable ingredient for meat analogues

As the world's population and income levels continue to rise, there is a substantial increase in the demand for meat, which poses significant environmental challenges due to large-scale livestock production. This review explores the potential of microalgae as a sustainable protein source for meat analogues. The nutritional composition, functional properties, and environmental advantages of microalgae are analyzed. Additionally, current obstacles to large-scale microalgal food production are addressed, such as strain development, contamination risks, water usage, and downstream processing. The challenges associated with creating meat-like textures and flavors using techniques like extrusion and emulsion formation with microalgae are also examined. Lastly, considerations related to consumer acceptance, marketing, and regulation are summarized. By focusing on improvements in cultivation, structure, sensory attributes, and affordability, microalgae demonstrate promise as a transformative and eco-friendly protein source to enhance the next generation of meat alternatives.

Enhancing the Biological Effects of Bioactive Compounds from Microalgae through Advanced Processing Techniques: Pioneering Ingredients for Next-Generation Food Production

The heightened interest in healthy dietary practices and the preference for fresh, minimally processed foods with reduced additives have witnessed a significant surge among consumers. Within this context, bioactive compounds have garnered attention as potent agents offering beneficial biological effects when integrated into food formulations. Nevertheless, the efficacy of these bioactive compounds in product development encounters numerous challenges during various processing and storage stages due to their inherent instability. Addressing these limitations necessitates exploring novel technological approaches tailored explicitly to the application of bioactive compounds in food production. These approaches should not only focus on preserving the bioactive compounds within food matrices but also on retaining the sensory attributes (color, taste, and aroma) of the final food products. The impact of microalgae and their bioactive compounds on human health and well-being has been extensively reported in the literature. However, there is still a gap regarding the processing and stability of microalgal bioactive compounds to improve their application in the food industry. The main goal of the present work is to point out how to overcome technological challenges in enhancing the stability of bioactive compounds from microalgae for optimal food applications.

Innovative vs classical methods for drying heterotrophic Chlorella vulgaris: Impact on protein quality and sensory properties

Drying is a necessary step in the microalgae production chain to reduce microbial load and oxidative degradation of the end product. Depending on the differences in applied temperature and treatment time, the process of drying can have a substantial impact on protein quality and aroma, important characteristics determining the incorporation potential in food products. In this study, we compared the drying of heterotrophic Chorella vulgaris with both innovative (agitated thin film drying (ATFD), pulse combustion drying (PCD) and solar drying (SolD)) and commonly used drying techniques (spray drying (SprD) and freeze drying (FD)). To evaluate the impact on protein quality, we evaluated techno-functional properties, in vitro digestibility (INFOGEST) as well as protein denaturation using differential scanning calorimetry (DSC). A sensory analysis was performed by a trained expert panel, combined with headspace solid-phase microextraction (HS-SPME) - gas chromatography-mass spectrometry (GC-MS) to determine volatile organic compounds (VOCs). ATFD was found to increase techno-functional properties such as gelling, water holding and solubility as well as in vitro protein digestibility. These observations could be related to induced cell disruption and protein denaturation by ATFD. Sensory analysis indicated an increased earthy off-flavor after ATFD. Interestingly, the high-temperature PCD led to an increase in cacao odor while low-temperature FD resulted in lower flavor, odors and VOCs. These results demonstrate that protein quality and sensorial properties of C. vulgaris can be steered through the type of drying, which could help in the selection of application-specific drying methods. Overall, this work could promote the incorporation of microalgal single cell proteins in different innovative food products.

Microalgae Proteins as Sustainable Ingredients in Novel Foods: Recent Developments and Challenges

Microalgae are receiving increased attention in the food sector as a sustainable ingredient due to their high protein content and nutritional value. They contain up to 70% proteins with the presence of all 20 essential amino acids, thus fulfilling human dietary requirements. Microalgae are considered sustainable and environmentally friendly compared to traditional protein sources as they require less land and a reduced amount of water for cultivation. Although microalgae's potential in nutritional quality and functional properties is well documented, no reviews have considered an in-depth analysis of the pros and cons of their addition to foods. The present work discusses recent findings on microalgae with respect to their protein content and nutritional quality, placing a special focus on formulated food products containing microalgae proteins. Several challenges are encountered in the production, processing, and commercialization of foods containing microalgae proteins. Solutions presented in recent studies highlight the future research and directions necessary to provide solutions for consumer acceptability of microalgae proteins and derived products.

Improvement of amphipathic properties with molecular structure unfolding and activation of cottonseed protein as ultra stable and safe emulsifier by deamidation

By-product cottonseed proteins are excellent options for numerous applications due to their superior properties and lower cost. However, its complex folded structure and large molecular weight lead to lower reactivity and insufficient amphiphilicity. Cottonseed protein isolate (CPI) is less-soluble in water. Therefore, we improved the amphiphilicity of CPI with associated hydrolysis, molecular structure unfolding, and activation by alkaline-induced deamidation (at 24, 36, and 72 h) and produced three cottonseed protein hydrolysates CPH 24, 36, and 72. FTIR/UV-CD measurements confirmed the conformational changes and conversion of the structural content. Particle size decreased 2503.4-771.8 nm, while surface hydrophobicity (133.5-326.7), carboxyl content (1.13 × 10־3-2.09 × 10־3), and flexibility increased, signifying hydrolysis, unfolding, and amphiphilicity improvement. Longer deamidation (CPH 72) exhibited the best properties, its prepared emulsions were long-term stable under all the environmental stresses without visible phase separation after at least 40 days of storage except at pH 4. Compared to CPI, it had smaller droplets (939.3-264.9 nm) and larger absolute ζ-potential (-26.5 to -58.0 mV). From the in-vitro cytotoxicity test, deamidated CPI is extremely safer than commonly used synthetic surfactants. This research provides a new method for producing multifunctional emulsifiers from CPI, which could be utilized in the development of functional foods/non-foods.

The Experimental Development of Emulsions Enriched and Stabilized by Recovering Matter from Spirulina Biomass: Valorization of Residue into a Sustainable Protein Source

Spirulina consists of a cluster of green-colored cyanobacteria; it is commonly consumed as a food or food supplement rich in bioactive compounds with antioxidant activity, predominantly C-phycocyanin (C-PC), which is related to anti-inflammatory action and anticancer potential when consumed frequently. After C-PC extraction, the Spirulina residual biomass (RB) is rich in proteins and fatty acids with the potential for developing food products, which is interesting from the circular economy perspective. The present work aimed to develop a vegan oil-in-water emulsion containing different contents of Spirulina RB, obtaining a product aligned with current food trends. Emulsions with 3.0% (w/w) of proteins were prepared with different chickpea and Spirulina RB ratios. Emulsifying properties were evaluated regarding texture and rheological properties, color, antioxidant activity, and droplet size distribution. The results showed that it was possible to formulate stable protein-rich emulsions using recovering matter rich in protein from Spirulina as an innovative food ingredient. All the concentrations used of the RB promoted the formulation of emulsions presenting interesting rheological parameters compared with a more traditional protein source such as chickpea. The emulsions were also a source of antioxidant compounds and maintained the color for at least 30 days after production.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Stabilization of oil-water emulsions with protein concentrates from the microalga Tetradesmus obliquus

The present work used water-soluble protein concentrates from the microalga Tetradesmus obliquus to stabilize sunflower oil emulsions. Microalgal cells were disrupted by sonication, and proteins were separated from the biomass using two methods, isoelectric and solvent precipitations. The protein extracts were concentrated by lyophilization, and the concentrates were used to produce emulsions with three amounts of Tetradesmus obliquus protein concentrate (TobPC) (0.1, 0.5, and 1.0% w/v). Emulsions were homogenized through sonication and characterized for creaming index, optical microscopy, size distribution, ζ-potential, and rheology. Isoelectric precipitation resulted in TobPC with a high protein content (51.46 ± 2.37%) and a better dispersibility profile. Emulsion stability was higher for both the isoelectric TobPC and control systems than for the TobPC solvent. Solvent TobPC does not efficiently stabilize emulsions at low protein concentrations that showed microscopically larger oil droplets and flocculation spots. A high phase separation velocity was observed for solvent TobPC, probably due to the higher hydrodynamic droplet diameters. The increase in TobPC content in the emulsions resulted in more stable emulsions for all samples. Therefore, Tetradesmus obliquus protein concentrates are a potential emulsifying agent.

Nutritional Value and Physicochemical Characteristics of Alternative Protein for Meat and Dairy-A Review

In order to alleviate the pressure on environmental resources faced by meat and dairy production and to satisfy the increasing demands of consumers for food safety and health, alternative proteins have drawn considerable attention in the food industry. However, despite the successive reports of alternative protein food, the processing and application foundation of alternative proteins for meat and dairy is still weak. This paper summarizes the nutritional composition and physicochemical characteristics of meat and dairy alternative proteins from four sources: plant proteins, fungal proteins, algal proteins and insect proteins. The difference between these alternative proteins to animal proteins, the effects of their structural features and environmental conditions on their properties, as well as the corresponding mechanism are compared and discussed. Though fungal proteins, algal proteins and insect proteins have shown some advantages over traditional plant proteins, such as the comparable protein content of insect proteins to meat, the better digestibility of fungal proteins and the better foaming properties of algal proteins, there is still a big gap between alternative proteins and meat and dairy proteins. In addition to needing to provide amino acid composition and digestibility similar to animal proteins, alternative proteins also face challenges such as maintaining good solubility and emulsion properties. Their nutritional and physicochemical properties still need thorough investigation, and for commercial application, it is important to develop and optimize industrial technology in alternative protein separation and modification.

Pickering Emulsion Stabilized by Tea Seed Cake Protein Nanoparticles as Lutein Carrier

To effectively deliver lutein, hydrothermally prepared tea seed cake protein nanoparticles (TSCPN) were used to fabricate Pickering emulsion, and the bioaccessibility of lutein encapsulated by Pickering emulsion and the conventional emulsion was evaluated in vitro. The results indicated that the average size and absolute value of zeta potential of TSCPN increased along with the increase in the protein concentration, and 2% protein concentration was adopted to prepare TSCPN. With the increase in the concentration of TSCPN, the size of Pickering emulsion decreased from 337.02 μm to 89.36 μm, and when the TSCPN concentration was greater than 0.6%, all emulsions exhibited good stability during the 14 days storage. Combined with the microstructure result, 1.2% TSCPN was used to stabilize Pickering emulsion. With the increase in ionic concentration (0-400 mM), the particle size of the emulsions increased while the absolute value of zeta potential decreased. TSCPN-based Pickering emulsion was superior to the conventional emulsion for both lutein encapsulation (96.6 ± 1.0% vs. 82.1 ± 1.4%) and bioaccessibility (56.0 ± 1.1% vs. 35.2 ± 1.2%). Thus, TSCPN-based Pickering emulsion in this study have the potential as an effective carrier for lutein.

Effects of pH and Ionic Salts on the Emulsifying and Rheological Properties of Acorn Protein Isolate

This study was designed to evaluate the emulsifying and rheological properties of acorn protein isolate (API) in different pH mediums (pH 3, 7 and 9) and in the presence of ionic salts (1 M NaCl and 1 M CaCl2). API shows higher solubility in distilled water at pH 7, while at the same pH, a decrease in solubility was observed for API in the presence of CaCl2 (61.30%). A lower emulsifying activity index (EAI), lower stability index (ESI), larger droplet sizes and slight flocculation were observed for API in the presence of salts at different pHs. Importantly, CaCl2 treated samples showed relevantly higher EAI (252.67 m2/g) and ESI (152.67 min) values at all pH as compared to NaCl (221.76 m2/g), (111.82 min), respectively. A significant increase in interfacial protein concentration (4.61 mg/m2) was observed for emulsion at pH 9 with CaCl2, while the major fractions of API were observed in an interfacial layer after SDS-PAGE analysis. All of the emulsion shows shear thinning behavior (τc > 0 and n < 1), while the highest viscosity was observed for emulsion prepared with CaCl2 at pH 3 (11.03 ± 1.62). In conclusion, API, in the presence of ionic salts at acidic, neutral and basic pH, can produce natural emulsions, which could be substitutes for synthetic surfactants for such formulations.

Effect of Fibril Entanglement on Pickering Emulsions Stabilized by Whey Protein Fibrils for Nobiletin Delivery

The aim of the study was to investigate the effects of whey protein isolate (WPI) fibrils entanglement on the stability and loading capacity of WPI fibrils-stabilized Pickering emulsion. The results of rheology and small-angle X-ray scattering (SAXS) showed the overlap concentration (C*) of WPI fibrils was around 0.5 wt.%. When the concentration was higher than C*, the fibrils became compact and entangled in solution due to a small cross-sectional radius of gyration value (1.18 nm). The interfacial behavior was evaluated by interfacial adsorption and confocal laser scanning microscopy (CLSM). As the fibril concentration increased from 0.1 wt.% to 1.25 wt.%, faster adsorption kinetics (from 0.13 to 0.21) and lower interfacial tension (from 11.85 mN/m to 10.34 mN/m) were achieved. CLSM results showed that WPI fibrils can effectively absorb on the surface of oil droplets. Finally, the microstructure and in vitro lipolysis were used to evaluate the effect of fibrils entanglement on the stability of emulsion and bioaccessibility of nobiletin. At C* concentration, WPI fibrils-stabilized Pickering emulsions exhibited excellent long-term stability and were also stable at various pHs (2.0–7.0) and ionic strengths (0–200 mM). WPI fibrils-stabilized Pickering emulsions after loading nobiletin remained stable, and in vitro digestion showed that these Pickering emulsions could significantly improve the extent of lipolysis (from 36% to 49%) and nobiletin bioaccessibility (21.9% to 62.5%). This study could provide new insight into the fabrication of food-grade Pickering emulsion with good nutraceutical protection.

Emergent Proteins-Based Structures-Prospects towards Sustainable Nutrition and Functionality

The increased pressure over soils imposed by the need for agricultural expansion and food production requires development of sustainable and smart strategies for the efficient use of resources and food nutrients. In accordance with worldwide transformative polices, it is crucial to design sustainable systems for food production aimed at reducing environmental impact, contributing to biodiversity preservation, and leveraging a bioeconomy that supports circular byproduct management. Research on the use of emergent protein sources to develop value-added foods and biomaterials is in its infancy. This review intends to summarize recent research dealing with technological functionality of underused protein fractions, recovered from microbial biomass and food waste sources, addressing their potential applications but also bottlenecks. Protein-based materials from dairy byproducts and microalgae biomass gather promising prospects of use related to their techno-functional properties. However, a balance between yield and functionality is needed to turn this approach profitable on an industrial scale basis. In this context, downstream processing should be strategically used and properly integrated. Food solutions based on microbial proteins will expand in forthcoming years, bringing the opportunity to finetune development of novel protein-based biomaterials.

Behavior of concentrated emulsions prepared by acid-hydrolyzed insoluble microalgae proteins from Chlorella protothecoides

BACKGROUND

Microalgae are a promising alternative source to meet the increasing global demand for protein. The insoluble microalgae protein fraction that makes up over half of the protein composition of the biomass has shown potential to serve as a functional emulsifier after acidic hydrolysis. However, creaming was observed due to the flocculation of emulsion droplets, suggesting a preferable use in concentrated emulsions.

RESULTS

In this study, we examined the emulsifying behavior of the untreated insoluble microalgae protein fraction and two of its hydrolysates obtained in 0.5 mol L^-1 HCl for 4 h at 65 °C (Hydrolysates 65) or 85 °C (Hydrolysates 85), at a concentration of 3% (w/w), and elevated levels of oil (50-70%). The results showed an increase in droplet size and apparent viscosity with increasing oil content in the emulsions. The emulsions made with Hydrolysates 85 had the smallest droplet size and the highest apparent viscosity. The gravitational separation was hindered when oil content was increased. The Hydrolysates 85 stabilized emulsions had a gel-like structure and were stable against coalescence or creaming during a 7 day storage test.

CONCLUSION

The results suggest that the thermal acid-treated fraction Hydrolysates 85 may, in particular, be a good emulsifier to formulate concentrated emulsion-based foods with oil content over 50%, such as mayonnaise, salad dressings, or dips. © 2020 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Alternative Protein Sources as Technofunctional Food Ingredients

Proteins obtained from alternative sources such as plants, microorganisms, and insects have attracted considerable interest in the formulation of new food products that have a lower environmental footprint and offer means to feed a growing world population. In contrast to many established proteins, and protein fractions for which a substantial amount of knowledge has accumulated over the years, much less information is available on these emerging proteins. This article reviews the current state of knowledge on alternative proteins and their sources, highlighting gaps that currently pose obstacles to their more widespread application in the food industry. The compositional, structural, and functional properties of alternative proteins from various sources, including plants, algae, fungi, and insects, are critically reviewed. In particular, we focus on the factors associated with the creation of protein-rich functional ingredients from alternative sources. The various protein fractions in these sources are described as well as their behavior under different environmental conditions (e.g., pH, ionic strength, and temperature). The extraction approaches available to produce functional protein ingredients from these alternative sources are introduced as well as challenges associated with designing large-scale commercial processes. The key technofunctional properties of alternative proteins, such as solubility, interfacial activity, emulsification, foaming, and gelation properties, are introduced. In particular, we focus on the formation of isotropic and anisotropic structures suitablefor creating meat and dairy product analogs using various structuring techniques. Finally, selected studies on consumer acceptance and sustainability of alternative protein products are considered.

Foaming of Acid-Hydrolyzed Insoluble Microalgae Proteins from Chlorella protothecoides

Microalgae are considered to be a promising alternative protein source after extraction and fractionation. Studies have shown that the insoluble protein fraction possesses interfacial activity and is able to stabilize oil-in-water emulsions after acid hydrolysis. The current work studied the surface pressure and foaming properties of the insoluble microalgae protein fraction obtained from Chlorella protothecoides and two of their hydrolysates. Results showed that the surface pressure of the three used protein fractions increased with increasing protein concentration. Moreover, surface pressure of the insoluble microalgae protein increased after hydrolysis at 65 °C (Hydrolysates 65) or 85 °C (Hydrolysates 85) suggesting an increased foaming capacity of the insoluble microalgae protein fraction after hydrolysis. Hydrolysates 85 had the highest foam capacity, and foams remained stable with a half-life time of over 5 h. Overall, hydrolysis of the insoluble microalgae protein fraction with 0.5 M HCl at 85 °C for 4 h resulted in generation of protein fragments that appear to be very suitable to stabilize air-water interfaces in foam-based foods.

Cultivation of Chlorella protothecoides under different growth modes and its utilisation in oil/water emulsions

Microalgae can be incorporated in different bio-based products; however, the green colour is a barrier for a successful integration. This study aims to overcome this barrier by growing microalgae in different cultivation modes. Mixotrophic cultivation of Chlorella protothecoides resulted in the highest biomass production after 5 days (5.56 ± 0.09 g/L), followed by heterotrophic and photoautotrophic cultivation (4.33 ± 0.15 and 1.80 ± 0.05 g/L, respectively). Mixotrophically and heterotrophically produced biomass presented a reduced greenish colouration compared to photoautotrophically produced biomass. Chlorophyll content resulted in 1.46 ± 0.21 and 0.95 ± 0.28 mg/g dry weight (DW) in mixotrophic and heterotrophic cultures, respectively, and 25.98 ± 1.28 mg/g DW in photoautotrophic cultures. In contrast, the fraction of carotenoids in the total pigments was much higher. With the whole microalgae fractions after cell disruption as ingredients, stable emulsions containing 50% oil could be produced. No syneresis with serum separation was observed 24 h after preparation.