Wettability of graphene: from influencing factors and reversible conversions to potential applications

Ultrafast and Reversible Superwettability Switching of 3D Graphene Foams via Solvent-Exclusive Plasma Treatments

For highly active electron transfer and ion diffusion, controlling the surface wettability of electrically and thermally conductive 3D graphene foams (3D GFs) is required. Here, we present ultrasimple and rapid superwettability switching of 3D GFs in a reversible and reproducible manner, mediated by solvent-exclusive microwave arcs. As the 3D GFs are prepared with vapors of nonpolar acetone or polar water exclusively, short microwave radiation (≤10 s) leads to plasma hotspot-mediated production of methyl and hydroxyl radicals, respectively. Upon immediate radical chemisorption, the 3D surfaces become either superhydrophobic (water contact angle = ∼170°) or superhydrophilic (∼0°), and interestingly, the wettability transition can be repeated many times due to the facile exchange between previously chemisorbed and newly introduced radicals via the formation of methanol-like intermediates. When 3D GFs of different surficial polarities are incorporated into electric double-layer capacitors with nonpolar ionic liquids or polar aqueous electrolytes, the polarity matching between graphene surfaces and electrolytes results in ≥548.0 times higher capacitance compared to its mismatching at ≥0.5 A g-1, demonstrating the significance of wettability-controlled 3D GFs.

Transcending Lifshitz Theory: Reliable Prediction of Adhesion Forces between Hydrocarbon Surfaces in Condensed Phases Using Molecular Contact Thermodynamics

Lifshitz theory is widely used to calculate interfacial interaction energies and underpins established approaches to the interpretation of measurement data from experimental methods including the surface forces apparatus and the atomic force microscope. However, a significant limitation of Lifshitz theory is that it uses the bulk dielectric properties of the medium to predict the work of adhesion. Here, we demonstrate that a different approach, in which the interactions between molecules at surfaces and in the medium are described by a set of surface site interaction points (SSIPs), yields interaction free energies that are correlated better with experimentally determined values. The work of adhesion W(Lifshitz) between hydrocarbon surfaces was calculated in 260 liquids using Lifshitz theory and compared with interaction free energies ΔΔG calculated using the SSIP model. The predictions of these models diverge in significant ways. In particular, ΔΔG values for hydrocarbon surfaces are typically small and vary little, but in contrast, W(Lifshitz) values span 4 orders of magnitude. Moreover, the SSIP model yields significantly different ΔΔG values in some liquids for which Lifshitz theory predicts similar values of W(Lifshitz). These divergent predictions were tested using atomic force microscopy. Experimentally determined works of adhesion were closer to the values predicted using the SSIP model than Lifshitz theory. In mixtures of methanol and benzyl alcohol, even greater differences were found in the interaction energies calculated using the two models: the value of ΔΔG calculated using the SSIP model declines smoothly as the benzyl alcohol concentration increases, and values are well correlated with experimental data; however, W(Lifshitz) decreases to a minimum and then increases, reaching a larger value for benzyl alcohol than for methanol. We conclude that the SSIP model provides more reliable estimates of the work of adhesion than Lifshitz theory.

Ti3C2 MXene-based nanozyme as coreaction accelerator for enhancing electrochemiluminescence of glucose biosensing

Delamination of the exfoliated multilayer MXenes with electro-catalysts, not only leads to increasing surface area for high electrochemiluminescent (ECL) signal tracer loading but also provides highly sensitive achievements in a coreaction accelerator manner. To this end, herein, we used bromophenol blue (BPB)-delaminated multilayer Ti3C2 MXene as both a coreaction accelerator to promote the electrochemiluminescent (ECL) reaction rate of luminol (LUM) and the co-reactant H2O2 and a substrate for retaining high loading of glucose oxidase (GOx)-conjugated polyethylene imine (PEI) along with luminophore species into more open structure of Ti3C2 MXene for sensitive detection of glucose. In the presence of glucose, in situ generating H2O2 product through a GOx-catalyzed process could produce abundant •OH radicals via the peroxidase-like activity of the BPB@Ti3C2 in the LUM ECL reaction. Moreover, decreasing the distance between the high-content LUM into the BPB@Ti3C2 and the generated •OH, minimizes the decomposition of highly active •OH, providing a superb ECL signal. Last, the proximity of incorporated GOx into the delaminated Ti3C2 MXene near the electrode allows efficient electron transfer between the electrode and enzyme. The integration of such amplifying effects endowed high sensitivity and excellent selectivity for glucose with a low limit of detection of 0.02 μM in the wide range of 0.01 μM-40,000 μM, enabling the feasibility of the glucose analysis in human serum samples. Overall, the enhanced ECL based on the BPB@Ti3C2 opens a new horizon to develop highly sensitive MXene-based ECL toward the field of biosensors.

Atomic surface achieved through a novel cross-scale model from macroscale to nanoscale

Chemical mechanical polishing (CMP) is widely used to achieve an atomic surface globally, yet its cross-scale polishing mechanisms are elusive. Moreover, traditional CMP normally employs toxic and corrosive slurries, resulting in potential pollution to the environment. To overcome these challenges, a novel cross-scale model from the millimeter to nanometer scale is proposed, which was confirmed by a newly developed green CMP process. The developed CMP slurry consisted of hydrogen peroxide, sodium carbonate, sodium hydroxycellulose, and silica. Prior to CMP, fused silica was polished by a ceria slurry. After CMP, the surface roughness (Sa) was 0.126 nm, the material-removal rate was 88.3 nm min-1, and the thickness of the damaged layer was 8.8 nm. The proposed model was built by fibers, through integrating Eulerian and Lagrangian models and reactive force field-molecular dynamics. The results predicted by the model were in good agreement with those of CMP experimentally. A model for large-sized fibers revealed that a direct contact area of 11.12% was obtained for a non-woven polishing pad during the CMP experiments. Another model constructed via combining Eulerian and Lagrangian functions showed that the stress at the intersections of the fibers varied mainly from 0.1 to 0.01 MPa and was higher than the stress at other parts. An increase in viscosity led to a decrease in the areas with low stress, demonstrating that viscosity enhanced the stress and facilitated the removal of material. At the microscale and nanoscale, the stress of the abrasive surface exposed to the workpiece changed from 2.21 to 6.43 GPa. Stress at the interface contributed to the formation of bridging bonds, further promoting the removal of material. With increasing the compressive stress, the material-removal form was transformed from a single atom to molecular chains. The proposed model and developed green CMP offer new insights to understand the cross-scale polishing mechanism, as well as for designing and manufacturing novel polishing slurries, pads, and setups.

Surface Engineering of Migratory Corrosion Inhibitors: Controlling the Wettability of Calcium Silicate Hydrate in the Nanoscale

Migratory corrosion inhibitors (MCIs) are regarded as effective additives to prevent harmful ion transmission and improve concrete durability, but their behavior in the porosity of concrete is still unclarified. This paper proposes a unique perspective to evaluate the effects of surfactant-like MCIs in calcium silicate hydrate (C-S-H) nanoporosity through molecular and electronic structural information. Advanced enhanced sampling methods and perturbation theory methods were applied to evaluate the role of different MCIs. The reduced density gradient of MCI molecules was obtained by using quantum chemical calculations. This calculation is instrumental in elucidating the intensity of interactions among distinct MCI molecule head groups and the C-S-H matrix. It is found that MCIs can effectively improve the interfacial tension (IFT) between C-S-H and water, which corresponds to the inhibitory ability of transmission. Free energy indicates that the MCI has the properties of strong adsorption and weak dissolution, facilitating the improvement of IFT. The relationship between the MCI functional group and the ability of adsorption and dissolution is revealed. This study suggests that MCIs work as surface controllers of C-S-H pores and that their properties can be assessed on the nanoscale.

Dielectric-free electrowetting on graphene

Electrowetting is a simple way to induce the spreading and retraction of electrolyte droplets. This method is widely used in "device" applications, where a dielectric layer is applied between the electrolyte and the conducting substrate. Recent work, including contributions from our own laboratory, have shown that reversible electrowetting can be achieved directly on conductors. We have shown that graphite surfaces, in particular when combined with highly concentrated electrolyte solutions, show a strong wetting effect. The process is driven by the interactions between the electrolyte ions and the surface, hence models of double-layer capacitance are able to explain changes in the equilibrium contact angles. Herein, we extend the approach to the investigation of electrowetting on graphene samples of varying thickness, prepared by chemical vapor deposition. We show that the use of highly concentrated aqueous electrolytes induces a clear yet subtle electrowetting response due to the adsorption of ions and the suppression of the negative effect introduced by the surface impurities accumulating during the transfer process. The latter have been previously reported to fully hinder electrowetting at lower electrolyte concentrations. An amplified wetting response is recorded in the presence of strongly adsorbed/intercalated anions in both aqueous and non-aqueous electrolytes. The phenomenon is interpreted based on the anion-graphene interactions and their influence on the energetics of the interface. By monitoring the dynamics of wetting, an irreversible behaviour is identified in all cases as a consequence of the irreversibility of anion adsorption and/or intercalation. Finally, the effect of the underlying reactions on the timescales of wetting is also examined.

Application of a Fluctuating Charge Polarization Model to Large Polyaromatic Hydrocarbons and Graphene Nanoflakes

We present a polarization model incorporating coupled fluctuating charges and point inducible dipoles that is able to accurately describe the dipole polarizabilities of small hydrocarbons and, for sufficiently large graphene nanoflakes, reproduce the classical image potential of an infinite conducting sheet. When our fluctuating charge model is applied to the hexagonal carbon nanoflake C60000 we attain excellent agreement with the image potential and induced charge distribution of a conducting sheet. With the inclusion of inducible dipole terms, the model predicts an image plane of zim = 1.3334 a0, which falls in line with prior estimates for graphene. We consider the case of two charges placed on opposite sides of C60000 and find that the fluctuating charge model reproduces classical electrostatics once again. By testing opposing and similar signs of the external charges, we conclude that an atomically thin molecule or extended system does not fully screen their interaction.

Coupling solute interactions with functionalized graphene membranes: towards facile membrane-level engineering

Optimizing ion transport through nanoporous graphene membranes with intricate engineering at nanoscale levels finds applications ranging from ion segregation to desalination. Such membrane-level engineering often requires futuristic and state-of-the-art micro- and nanofabrication infrastructure making it less accessible to widespread applications. In this study, the effective membrane pore size is modulated using macroscopic membrane functionalization, which, when combined with the solute concentration, can prove to be facile nanoscale engineering towards achieving selectivity. By performing robust molecular dynamics (MD) simulations of aqueous NaCl solution through a nanoporous graphene membrane, we demonstrate that varying membrane wettability influences the structural organization of ions and water molecules both in the vicinity and inside the nanopore, which is manifested in the form of altered permeation characteristics. Moreover, the disparate solvation characteristics of the ionic species in conjunction with the variable van der Waals interactive forces affect the ion-selective nature (Cl^- over Na⁺) of the membrane. The relative hydrophilization, resulting from the effective functionalization of the nanoporous graphene membrane, not only allows greater control over the permeation characteristics of ions and water molecules mediated by an altered depletion ratio but also gives rise to the ion-selective nature of the membrane, thus providing a sound understanding of the transport properties of ion-water solutions through nanoporous materials.

Controllable and Gradient Wettability of Bilayer Two-Dimensional Materials Regulated by Interlayer Distance

Surfaces with controllable and gradient wettability often require an elaborate design of the microstructure or its response under electrical, thermal, optical, pH, and other stimuli. Generally, the wettability change under these physical or chemical effects relies on a complex mechanism that is difficult to be quantitatively described. In this study, an online controlling strategy for surface wettability and the corresponding theoretical model are put forward based on a bilayer graphene-like atomic structure. Molecular dynamics results indicate that the surface wettability varies toward hydrophilicity after sticking a bottom material regardless of its wettability. But such an influence becomes weak with increasing interlayer distance, and the overall wettability approaches that of the upper layer material gradually. This variation is elucidated by the increase of the work of adhesion, providing new insight into the wetting transparency of graphene. A theoretical model of the governing relationship is established based on the work of adhesion, which correlates the overall surface wettability with the interlayer distance and the wettabilities of individual materials. Moreover, a surface with a uniform wettability gradient is achieved by inclining the bottom material. The spontaneous and steady motion of droplets can be induced by this gradient wettability. The relevant speedup behavior is evaluated through a theoretical model considering the varying interlayer distance, which reveals the critical role of the lower layer. This study proposes a novel strategy for controllable wetting and relevant gradient surfaces using prevailing two-dimensional materials, paving new routes to many applications such as microfluidic chips, virus diagnosis, and intelligent sensors.

Discovery of Graphene-Water Membrane Structure: Toward High-Quality Graphene Process

It is widely accepted that solid-state membranes are indispensable media for the graphene process, particularly transfer procedures. But these membranes inevitably bring contaminations and residues to the transferred graphene and consequently compromise the material quality. This study reports a newly observed free-standing graphene-water membrane structure, which replaces the conventional solid-state supporting media with liquid film to sustain the graphene integrity and continuity. Experimental observation, theoretical model, and molecular dynamics simulations consistently indicate that the high surface tension of pure water and its large contact angle with graphene are essential factors for forming such a membrane structure. More interestingly, water surface tension ensures the flatness of graphene layers and renders high transfer quality on many types of target substrates. This report enriches the understanding of the interactions on reduced dimensional material while rendering an alternative approach for scalable layered material processing with ensured quality for advanced manufacturing.

Shape Entropy of a Reconfigurable Ising Surface

Disclinations in a 2D sheet create regions of Gaussian curvature whose inversion produces a reconfigurable surface with many distinct metastable shapes, as shown by molecular dynamics of a disclinated graphene monolayer. This material has a near-Gaussian "density of shapes" and an effectively antiferromagnetic interaction between adjacent cones. A∼10  nm patch has hundreds of distinct metastable shapes with tunable stability and topography on the size scale of biomolecules. As every conical disclination provides an Ising-like degree of freedom, we call this technique "Isigami."

How Gas-Solid Interaction Matters in Graphene-Doped Silica Aerogels

It was interesting to experimentally find that the thermal insulation of silica aerogels was improved by doping graphene sheets with high heat conductivity. The underlying mechanism is investigated in the present work from the perspective of gas-solid interaction using a comprehensive analysis of molecular dynamics (MD) simulations, theoretical modeling, and experimental data. The MD-modeled small pores are demonstrated to effectively represent big pores in silica aerogels because of similar heat conduction physics, because it is found that adsorption does not contribute to gas heat conduction. Meanwhile, based on the experimentally measured density, the porous structures are schematically re-engineered using molecular modeling for the first time. The evaluated pore size distributions numerically present a consistency with available experimental data. Inspired by the visualization of the 3D pore structure, we proposed a graphene/silica/nitrogen model to evaluate the role of graphene in heat conduction: it can not only reduce effective gas collision (impede heat transport) but also enhance the gas-solid coupling effect. The former is dominant because of the high porosity, leading to an improvement in thermal insulation. The competition between them can be the reason for the "trade-off" phenomenon in the graphene doping effect in the available experiment.

Intrinsic Wettability in Pristine Graphene

The wettability of graphene remains controversial owing to its high sensitivity to the surroundings, which is reflected by the wide range of reported water contact angle (WCA). Specifically, the surface contamination and underlying substrate would strongly alter the intrinsic wettability of graphene. Here, the intrinsic wettability of graphene is investigated by measuring WCA on suspended, superclean graphene membrane using environmental scanning electron microscope. An extremely low WCA with an average value ≈30° is observed, confirming the hydrophilic nature of pristine graphene. This high hydrophilicity originates from the charge transfer between graphene and water molecules through H-π interaction. The work provides a deep understanding of the water-graphene interaction and opens up a new way for measuring the surface properties of 2D materials.

Tuning the Structure, Conductivity, and Wettability of Laser-Induced Graphene for Multiplexed Open Microfluidic Environmental Biosensing and Energy Storage Devices

The integration of microfluidics and electrochemical cells is at the forefront of emerging sensors and energy systems; however, a fabrication scheme that can create both the microfluidics and electrochemical cells in a scalable fashion is still lacking. We present a one-step, mask-free process to create, pattern, and tune laser-induced graphene (LIG) with a ubiquitous CO₂ laser. The laser parameters are adjusted to create LIG with different electrical conductivity, surface morphology, and surface wettability without the need for postchemical modification. Such definitive control over material properties enables the creation of LIG-based integrated open microfluidics and electrochemical sensors that are capable of dividing a single water sample along four multifurcating paths to three ion selective electrodes (ISEs) for potassium (K⁺), nitrate (NO₃^-), and ammonium (NH₄⁺) monitoring and to an enzymatic pesticide sensor for organophosphate pesticide (parathion) monitoring. The ISEs displayed near-Nernstian sensitivities and low limits of detection (LODs) (10^-5.01 M, 10^-5.07 M, and 10^-4.89 M for the K⁺, NO₃^-, and NH₄⁺ ISEs, respectively) while the pesticide sensor exhibited the lowest LOD (15.4 pM) for an electrochemical parathion sensor to date. LIG was also specifically patterned and tuned to create a high-performance electrochemical micro supercapacitor (MSC) capable of improving the power density by 2 orders of magnitude compared to a Li-based thin-film battery and the energy density by 3 orders of magnitude compared to a commercial electrolytic capacitor. Hence, this tunable fabrication approach to LIG is expected to enable a wide range of real-time, point-of-use health and environmental sensors as well as energy storage/harvesting modules.

A short review of graphene in the microbial electrosynthesis of biochemicals from carbon dioxide

Microbial electrosynthesis (MES) is a potential energy transformation technology for the reduction of the greenhouse gas carbon oxide (CO2) into commercial chemicals.

Tuning the Dielectric Response of Water in Nanoconfinement through Surface Wettability

The tunable polarity of water can be exploited in emerging technologies including catalysis, gas storage, and green chemistry. Recent experimental and theoretical studies have shown that water can be rendered into an effectively apolar solvent under nanoconfinement. We furthermore demonstrate, through molecular simulations, that the static dielectric constant of water can be modified by changing the wettability of the confining material. We find the out-of-plane dielectric response to be highly sensitive to the level of confinement and can be reduced up to 40× , in accordance with experimental data. By altering the surface wettability from superhydrophilic to superhydrophobic, we observe a 36% increase for the out-of-plane and a 31% decrease for the in-plane dielectric constants. Our findings demonstrate the feasibility of tunable water polarity, a phenomenon with great potential for scientific and technological impact.

Hydrophilic, Clean Graphene for Cell Culture and Cryo-EM Imaging

The wettability of graphene is critical for numerous applications but is very sensitive to its surface cleanness. Herein, by clarifying the impact of intrinsic contamination, i.e., amorphous carbon, which is formed on the graphene surface during the high-temperature chemical vapor deposition (CVD) process, the hydrophilic nature of clean graphene grown on single-crystal Cu(111) substrate was confirmed by both experimental and theoretical studies, with an average water contact angle of ∼23°. Furthermore, the wettability of as-transferred graphene was proven to be highly dependent on its intrinsic cleanness, because of which the hydrophilic, clean graphene exhibited improved performance when utilized for cell culture and cryoelectron microscopy imaging. This work not only validates the intrinsic hydrophilic nature of graphene but also provides a new insight in developing advanced bioapplications using CVD-grown clean graphene films.

Laser-Induced Graphene Heater Pad for De-Icing

The replacement of electro-thermal material in heaters with lighter and easy-to-process materials has been extensively studied. In this study, we demonstrate that laser-induced graphene (LIG) patterns could be a good candidate for the electro-thermal pad. We fabricated LIG heaters with various thermal patterns on the commercial polyimide films according to laser scanning speed using an ultraviolet pulsed laser. We adopted laser direct writing (LDW) to irradiate on the substrates with computer-aided 2D CAD circuit data under ambient conditions. Our highly conductive and flexible heater was investigated by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, X-ray diffraction, and Brunauer-Emmett-Teller. The influence of laser scanning speed was evaluated for electrical properties, thermal performance, and durability. Our LIG heater showed promising characteristics such as high porosity, light weight, and small thickness. Furthermore, they demonstrated a rapid response time, reaching equilibrium in less than 3 s, and achieved temperatures up to 190 °C using relatively low DC voltages of approximately 10 V. Our LIG heater can be utilized for human wearable thermal pads and ice protection for industrial applications.

Electro-Optical Biosensor Based on Embedded Double-Monolayer of Graphene Capacitor in Polymer Technology

In this work, we present an interferometric polymer-based electro-optical device, integrated with an embedded double-monolayer graphene capacitor for biosensing applications. An external voltage across the capacitor applies an electric field to the graphene layers modifying their surface charge density and the Fermi level position in these layers. This in turn changes the electro-optic properties of the graphene layers making absorption in the waveguide tunable with external voltages. Simultaneously, it is possible to appreciate that this phenomenon contributes to the maximization of the light-graphene interaction by evanescent wave in the sensing area. As a result, it is obtained large phase changes at the output of the interferometer, as a function of small variations in the refractive index in the cladding area, which significantly increasing the sensitivity of the device. The optimum interaction length obtained was 1.24 cm considering a cladding refractive index of 1.33. An absorption change of 129 dB/mm was demonstrated. This result combined with the photonic device based on polymer technology may enable a low-cost solution for biosensing applications in Point of Care (PoC) platform.

Ultrasensitive and Reusable Graphene Oxide-Modified Double-Interdigitated Capacitive (DIDC) Sensing Chip for Detecting SARS-CoV-2

This research reveals the promising functionalization of graphene oxide (GrO)-glazed double-interdigitated capacitive (DIDC) biosensing platform to detect severe acute respiratory syndrome coronavirus (SARS-CoV-2) spike (S1) proteins with enhanced selectivity and rapid response. The DIDC bioactive surface consisting of Pt/Ti featured SiO₂ substrate was fabricated using GrO/EDC-NHS/anti-SARS-CoV-2 antibodies (Abs) which is having layer-by-layer interface self-assembly chemistry method. This electroactive immune-sensing platform exhibits reproducibility and sensitivity with reference to the S1 protein of SARS-CoV-2. The outcomes of analytical studies confirm that GrO provided a desired engineered surface for Abs immobilization and amplified capacitance to achieve a wide detection range (1.0 mg/mL to 1.0 fg/mL), low limit of detection (1 fg/mL) within 3 s of response time, good linearity (18.56 nF/g), and a high sensitivity of 1.0 fg/mL. Importantly, the unique biochip was selective against blood-borne antigens and standby for 10 days at 5 °C. Our developed DIDC-based SARS-CoV-2 biosensor is suitable for point-of-care (POC) diagnostic applications due to portability and scaling-up ability. In addition, this sensing platform can be modified for the early diagnosis of severe viral infections using real samples.

Osteoinductive and antimicrobial mechanisms of graphene-based materials for enhancing bone tissue engineering

Graphene-based materials (GMs) have great application prospects in bone tissue engineering due to their osteoinductive ability and antimicrobial activity. GMs induce osteogenic differentiation through several mechanisms and pathways in bone tissue engineering. First of all, the surface and high hardness of the porous folds of graphene or graphene oxide (GO) can generate mechanical stimulation to initiate a cascade of reactions that promote osteogenic differentiation without any chemical inducers. In addition, change of the extracellular matrix (ECM), regulation of macrophage polarization, the oncostatin M (OSM) signaling pathway, the MAPK signaling pathway, the BMP signaling pathway, the Wnt/β-catenin signaling pathway, and other pathways are involved in GMs' regulation of osteogenesis. In bone tissue engineering, GMs prevent the formation of microbial biofilms mainly through preventing microbial adhesion and killing them. The former is mainly achieved by reducing surface free energy (SFE) and increasing hydrophobicity. The latter mainly includes oxidative stress and photothermal/photodynamic effects. Graphene and its derivatives (GDs) are mainly combined with bioactive ceramic materials, metal materials and macromolecular polymers to play an antimicrobial effect in bone tissue engineering. Concentration, number of layers, and type of GDs often affect the antimicrobial activity of GMs. In this paper, we reviewed relevant osteoinductive and antimicrobial mechanisms of GMs and their applications in bone tissue engineering.

Antibiofouling Activity of Graphene Materials and Graphene-Based Antimicrobial Coatings

Microbial adhesion and biofilm formation is a common, nondesirable phenomenon at any living or nonliving material surface in contact with microbial species. Despite the enormous efforts made so far, the protection of material surfaces against microbial adhesion and biofilm formation remains a significant challenge. Deposition of antimicrobial coatings is one approach to mitigate the problem. Examples of such are those based on heparin, cationic polymers, antimicrobial peptides, drug-delivering systems, and other coatings, each one with its advantages and shortcomings. The increasing microbial resistance to the conventional antimicrobial treatments leads to an increasing necessity for new antimicrobial agents, among which is a variety of carbon nanomaterials. The current review paper presents the last 5 years' progress in the development of graphene antimicrobial materials and graphene-based antimicrobial coatings that are among the most studied. Brief information about the significance of the biofouling, as well as the general mode of development and composition of microbial biofilms, are included. Preparation, antibacterial activity, and bactericidal mechanisms of new graphene materials, deposition techniques, characterization, and parameters influencing the biological activity of graphene-based coatings are focused upon. It is expected that this review will raise some ideas for perfecting the composition, structure, antimicrobial activity, and deposition techniques of graphene materials and coatings in order to provide better antimicrobial protection of medical devices.

Plasma modification of carbon nanowalls induces transition from superhydrophobic to superhydrophilic

Graphene-based materials play an essential role in a wide range of modern technologies due to their surface properties such as adsorption capacity and controllable wettability, which depend on the production methods. For practical applications, it is crucial to control the surface properties to achieve the desired wetting characteristics, which can be described with the contact angle (CA). Here, we experimentally investigate the wettability properties of the carbon nanowalls and show how to manage a wetting transition from superhydrophobic to superhydrophilic states. A CA of 170° was reached with direct plasma synthesis, while an angle smaller than 20° was achieved during the atmosphere plasma modification. Combining the formation of the surface groups due to the plasma treatment results and the macroscale wetting behavior in terms of the Cassie-Baxter model, we qualitatively explain how the observed wetting enhancement is induced by both controlled chemical and geometrical surface-heterogeneity.

Dielectric Profile and Electromelting of a Monolayer of Water Confined in Graphene Slit Pore

A monolayer of water confined between two parallel graphene sheets exists in many different phases and exhibits fascinating dielectric properties that have been studied in experiments. In this work, we use molecular dynamics simulations to study how the dielectric properties of a confined monolayer of water is affected by its structure. We consider six of the popular nonpolarizable water models-SPC/E, SPC/Fw, TIP3P, TIP3P_M (modified), TIP4P-2005, and TIP4P-2005f-and find that the in-plane structure of the water molecules at ambient temperature and pressure is strongly dependent on the water model: all the 3-point water models considered here show square ice formation, whereas no such structural ordering is observed for the 4-point water models. This allows us to investigate the role of the in-plane structure of the water monolayer on its dielectric profile. Our simulations show an anomalous perpendicular dielectric constant compared to the bulk, and the models that do not exhibit ice formation show very different dielectric response along the channel width compared to models that exhibit square ice formation. We also demonstrate the occurrence of electromelting of the in-plane ordered water under the application of a perpendicular electric field and find that the critical field for electromelting strongly depends on the water model. Together, we have shown the dependence of confined water properties on the different water structures that it may take when sandwiched between bilayer graphene. These remarkable properties of confined water can be exploited in various nanofluidic devices, artificial ion channels, and molecular sieving.

Graphene-Based Electrodes in a Vanadium Redox Flow Battery Produced by Rapid Low-Pressure Combined Gas Plasma Treatments

The development of high-power density vanadium redox flow batteries (VRFBs) with high energy efficiencies (EEs) is crucial for the widespread dissemination of this energy storage technology. In this work, we report the production of novel hierarchical carbonaceous nanomaterials for VRFB electrodes with high catalytic activity toward the vanadium redox reactions (VO²⁺/VO₂ ⁺ and V²⁺/V³⁺). The electrode materials are produced through a rapid (minute timescale) low-pressure combined gas plasma treatment of graphite felts (GFs) in an inductively coupled radio frequency reactor. By systematically studying the effects of either pure gases (O₂ and N₂) or their combination at different gas plasma pressures, the electrodes are optimized to reduce their kinetic polarization for the VRFB redox reactions. To further enhance the catalytic surface area of the electrodes, single-/few-layer graphene, produced by highly scalable wet-jet milling exfoliation of graphite, is incorporated into the GFs through an infiltration method in the presence of a polymeric binder. Depending on the thickness of the proton-exchange membrane (Nafion 115 or Nafion XL), our optimized VRFB configurations can efficiently operate within a wide range of charge/discharge current densities, exhibiting energy efficiencies up to 93.9%, 90.8%, 88.3%, 85.6%, 77.6%, and 69.5% at 25, 50, 75, 100, 200, and 300 mA cm^-2, respectively. Our technology is cost-competitive when compared to commercial ones (additional electrode costs < 100 € m^-2) and shows EEs rivalling the record-high values reported for efficient systems to date. Our work remarks on the importance to study modified plasma conditions or plasma methods alternative to those reported previously (e.g., atmospheric plasmas) to improve further the electrode performances of the current VRFB systems.

Design of new bioinspired GO-COOH decorated alginate/gelatin hybrid scaffolds with nanofibrous architecture: structural, mechanical and biological investigations

The current research study deals with the design and investigation of novel bioinspired and biocompatible GO-COOH decorated hybrid polymeric scaffolds with nanofibrous architecture as biomaterials with highly appropriate features for functional restoration of damaged tissue. Gelatin and alginate, two biobased-polymers with excellent biocompatibility, high microenvironment biomimicry and ability for proper guidance of cell development in combination with carboxylated graphene oxide (GO-COOH), embody the matrix of electrospun hybrid scaffolds. The underlying principle is based on various types of interactions that can take place between the functionalities of the system's entities (proved by DLS) and their synergy in improving the structural integrity, mechanical tailorability and biological performances of the new nanofibrous GO-COOH decorated hybrid scaffolds. The nanofibrous structure along with the presence of GO-COOH are established by SEM. The new covalent bonds formed between various functionalities of the protein-polysaccharide-GO-COOH system are proved by FTIR and XPS. The physico-chemical state of GO-COOH lattices within the hybrid structures is investigated by Raman spectrometry. The interpenetrated network of bicomponent structures determines a 10-fold increase of Young's modulus as compared to monocomponent counterparts while the dispersion of GO-COOH significantly increases the elasticity of materials. The biological results (MTT and LDH assays) indicate a good cytocompatibility of crosslinked bicomponent AGS scaffolds; the metabolic cellular activity is substantially improved following the GO-COOH addition, suggesting that GO-COOH can support the cell adhesion, growth and proliferation.

Associated molecular liquids at the graphene monolayer interface

We report molecular simulations of the interaction between a graphene sheet and different liquids such as water, ethanol, and ethylene glycol. We describe the structural arrangements at the graphene interface in terms of density profiles, number of hydrogen bonds (HBs), and local structuration in neighboring layers close to the surface. We establish the formation of a two-dimensional HB network in the layer closest to the graphene. We also calculate the interfacial tension of liquids with a graphene monolayer and its profile along the direction normal to the graphene to rationalize and quantify the strengthening of the intermolecular interactions in the liquid due to the presence of the surface.

Review of Vertical Graphene and its Applications

Vertical graphene (VG) is a thin-film complex material featuring hierarchical microstructures: graphene-containing carbon nanosheets growing vertically on its deposition substrate, few-layer graphene basal layers, and chemically active atomistic defect sites and edges. Thanks to the fundamental characteristics of graphene materials, e.g. excellent electrical conductivity, thermal conductivity, chemical stability, and large specific surface area, VG materials have been successfully implemented into various niche applications which are strongly associated with their unique morphology. The microstructure of VG materials can be tuned by modifying growth methods and the parameters of growth processes. Multiple growth processes have been developed to address faster, safer, and mass production methods of VG materials, as well as accommodating various applications. VG's successful applications include field emission, supercapacitors, fuel cells, batteries, gas sensors, biochemical sensors, electrochemical analysis, strain sensors, wearable electronics, photo trapping, terahertz emission, etc. Research topics on VG have been more diversified in recent years, indicating extensive attention from the research community and great commercial value. In this review article, VG's morphology is briefly reviewed, and then various growth processes are discussed from the perspective of plasma science. After that, the most recent progress in its applications and related sciences and technologies are discussed.

Covalent functionalization of carbon materials with redox-active organic molecules for energy storage

Carbon-based materials (CBMs) have shown great versatility because they can be chemically combined with other materials for various applications. Chemical modification of CBMs can be achieved via covalent or non-covalent interactions. Non-covalent interactions are weak and fragile, causing structural change and molecule dissociation. Therefore, in this review, we summarize the covalent modification of CBMs via organic chemistry techniques, aiming at forming more robust and stable CBMs. Besides, their application as electrode materials in energy storage systems is also within the scope of this review. Covalent binding of redox-active organic molecules with CBMs improves the transfer rate of electrons and prevents the dissolution of redox-active molecules, resulting in good conductivity and cycle life. Numerous papers on the functionalization of CBMs have been published to date, but some of them lack scientific evidence and are unable to understand from chemistry viewpoint. Reliable articles with adequate evidence are summarized in this review from a synthetic chemistry viewpoint.

Graphene: An Antibacterial Agent or a Promoter of Bacterial Proliferation?

Graphene materials (GMs) are being investigated for multiple microbiological applications because of their unique physicochemical characteristics including high electrical conductivity, large specific surface area, and robust mechanical strength. In the last decade, studies on the interaction of GMs with bacterial cells appear conflicting. On one side, GMs have been developed to promote the proliferation of electroactive bacteria on the surface of electrodes in bioelectrochemical systems or to accelerate interspecies electron transfer during anaerobic digestion. On the other side, GMs with antibacterial properties have been synthesized to prevent biofilm formation on membranes for water treatment, on medical equipment, and on tissue engineering scaffolds. In this review, we discuss the mechanisms and factors determining the positive or negative impact of GMs on bacteria. Furthermore, we examine the bacterial growth-promoting and antibacterial applications of GMs and debate their practicability.

A folded ice monolayer

A highly stable ice monolayer with folded structural motifs is predicted by means of a novel tiling method augmented with ab initio calculations. This ice monolayer has every two neighboring water hexamers connected by a water square yet folded into two distinct planes, and is thus coined as a folded ice model. It is in the ground state in a range of water densities from 0.08 to 0.12 Å-2, with a stronger energy preference at a lower water density. Its stability shown by ab initio molecular dynamics simulations can sustain up to a temperature of 100 K. The tiling method also enables the prediction of a family of considerably stable ice monolayers with a variety of puckered structures. These results enrich our knowledge of low-dimensional water structures and pave a way to explore more exotic ice nanostructures under confinements.

Recent advances in graphene monolayers growth and their biological applications: A review

Development of two-dimensional high-quality graphene monolayers has recently received great concern owing to their enormous applications in diverging fields including electronics, photonics, composite materials, paints and coatings, energy harvesting and storage, sensors and metrology, and biotechnology. As a result, various groups have successfully developed graphene layers on different substrates by using the chemical vapor deposition method and explored their physical properties. In this direction, we have focused on the state-of-the-art developments in the growth of graphene layers, and their functional applications in biotechnology. The review starts with the introduction, which contains outlines about the graphene and their basic characteristics. A brief history and inherent applications of graphene layers followed by recent developments in growth and properties are described. Then, the application of graphene layers in biodevices is reviewed. Finally, the review is summarized with perspectives and future challenges along with the scope for future technological applications.

Screening effect of CVD graphene on the surface free energy of substrates

The wettability of graphene has been a topic under constant discussion in the literature since 2012. In this work we measured the contact angle (CA) of six different types of substrates (glass, quartz, Si₃N₄, Si/SiO₂, sapphire and Si) with varying dielectric constants and surface roughnesses in order to calculate the surface free energy of graphene films to evaluate how the wetting properties of graphene-coated substrates are changed according to the underlying substrate. We used a residual-free transfer process to remove the high-quality graphene (CVD-Gr) grown onto copper foil. Afterwards, we performed an inert thermal treatment (Ar, at 300 °C for 30 minutes) to remove airborne contaminants from the graphene surface and evaluate the roughness of substrates by atomic force microscopy, the advancing and receding contact angles of two liquids (water and ethylene glycol), hysteresis, and surface free energy (polar and dispersive components) calculations. The presence of high-quality monolayer graphene (free of any air contaminants, polymer residues, etc.) led to a common wettability behaviour for all coated surfaces, regardless of the nature of the underlying substrate. This result can be understood in terms of the screening of van der Waals and dipole interactions by the electrons in graphene.

Solvent-Solvent Correlations across Graphene: The Effect of Image Charges

Wetting experiments show pure graphene to be weakly hydrophilic, but its contact angle (CA) also reflects the character of the supporting material. Measurements and molecular dynamics simulations on suspended and supported graphene often reveal a CA reduction due to the presence of the supporting substrate. A similar reduction is consistently observed when graphene is wetted from both sides. The effect has been attributed to transparency to molecular interactions across the graphene sheet; however, the possibility of substrate-induced graphene polarization has also been considered. Computer simulations of CA on graphene have so far been determined by ignoring the material's conducting properties. We improve the graphene model by incorporating its conductivity according to the constant applied potential molecular dynamics. Using this method, we compare the wettabilities of suspended graphene and graphene supported by water by measuring the CA of cylindrical water drops on the sheets. The inclusion of graphene conductivity and concomitant polarization effects leads to a lower CA on suspended graphene, but the CA reduction is significantly bigger when the sheets are also wetted from the opposite side. The stronger adhesion is accompanied by a profound change in the correlations among water molecules across the sheet. While partial charges on water molecules interacting across an insulator sheet attract charges of the opposite sign, apparent attraction among like charges is manifested across the conducting graphene. The change is associated with graphene polarization, as the image charges inside the conductor attract equally signed partial charges of water molecules on both sides of the sheet. Additionally, using a nonpolar liquid (diiodomethane), we affirm a detectable wetting translucency when liquid-liquid forces are dominated by dispersive interactions. Our findings are important for predictive modeling toward a variety of applications including sensors, fuel cell membranes, water filtration, and graphene-based electrode materials in high-performance supercapacitors.

Nitrogen-Doped Unusually Superwetting, Thermally Insulating, and Elastic Graphene Aerogel for Efficient Solar Steam Generation

By removing the oxygen-containing functional groups, thermal treatment in inert gas has been widely reported to improve the hydrophobicity of carbon materials. However, this work reports a contrary phenomenon for the nitrogen-doped graphene aerogel (NGA). As the temperature of thermal treatment increases from 200 to 1000 °C, NGA becomes more and more hydrophilic and the superwetting property remains for weeks in air. To uncover this unusual phenomenon, the effect of nitrogen doping is studied through both experiment and MD simulations. The effects of air exposure and air humidity are further investigated in detail to illustrate the whole physical picture clearly. The superwetting behavior is attributed to the preferential adsorption of water molecules to the nitrogen-doped sites, which significantly inhibits airborne hydrocarbon adsorption. In combination with the excellent properties including mechanical elasticity, high light absorption, and good thermal insulation, an efficient photothermal and solar steam generation performance is demonstrated by using NGA-600 as the photothermal material, presenting a high energy conversion efficiency of 86.2% and good recycling stability.

A Helical Monolayer Ice

Understanding water wetting layers on solid surfaces is essential for many natural and industrial processes. Here we find a helical ice monolayer with every six water molecules helically arranged along the normal of the basal plane by performing an intensive structural search based on ab initio calculations. The helical ice is more stable than all previous models of monolayer and bilayer ices in a wide range of water densities both in vacuum and on weakly interacting substrates due to a stronger network of hydrogen bonds enabled by the helical geometry. More compelling is the fact that this model adequately explains a recent experimental ice monolayer grown on graphite in terms of the lattice parameter, water density, and Moiré pattern. The helical character in the new ice model echoes previously reported helical motifs in one-dimensional ice structures and suggests an unexpected capability of hydrogen bonds in driving the surface reconstruction of ice structures.

Aqueous Activated Graphene Dispersions for Deposition of High-Surface Area Supercapacitor Electrodes

High-surface area activated graphene has a three-dimensional porous structure that makes it difficult to prepare dispersions. Here we report a general approach that allows the preparatioon of stable water-based dispersions/inks at concentrations of ≲20 mg/mL based on activated graphene using environmentally friendly formulations. Simple drying of the dispersion on the substrate allows the preparation of electrodes that maintain the high specific surface area of the precursor material (∼1700 m²/g). The electrodes are flexible because of the structure that consists of micrometer-sized activated graphene grains interconnected by carbon nanotubes (CNTs). The electrodes prepared using activated graphene demonstrate performance superior to that of reduced graphene oxide in supercapacitors with KOH and TEA BF₄/acetonitrile electrolytes providing specific capacitance values of 180 and 137 F/g, respectively, at a specific current of 1 A/g. The high surface area of activated graphene in combination with the good conductivity of CNTs allows an energy density of 35.6 Wh/kg and a power density of 42.2 kW/kg to be achieved. The activated graphene dispersions were prepared in liter amounts and are compatible with most industrial deposition methods.

Bioinspired surfaces with wettability for antifouling application

Wettability is a special character found in nature, including the superhydrophobicity of lotus leaves, the underwater superoleophobicity of fish scales and the slipperiness of pitcher plants. These surfaces exhibit unique properties such as resistance to icing, corrosion, and the like. The antifouling properties of the material surface have important applications in a variety of areas, such as in hulls, in medical equipment, in water pipes and underwater equipment. However, the traditional anti-fouling surface is usually combined with toxic substances or its manufacturing process is complicated and expensive, which cannot meet the current antifouling demand. These wettable surfaces have always exhibited good anti-biofouling and self-cleaning properties, and their use as antifouling surfaces can well solve the problems of the above-mentioned traditional antifouling surfaces. Here, we divided the wettable surfaces into superhydrophobic surfaces, underwater superoleophobic surfaces and slippery surfaces, respectively, summarizing their development in the field of antifouling. Their research progress in antibacterial, antibiotic flocculation and antiplatelet adhesion is highlighted. Furthermore, we provide our own insights into the shortcomings and development prospects of wettable surface applications in the field of antifouling.