A naphthyl appended ninhydrin based colorimetric chemosensor for Cu2+ ion: Detection of cysteine and ATP

A ninhydrin-based colorimetric chemosensor (LH) was synthesized using 3-hydroxy-2-naphthoic hydrazide and 11H-indeno[1,2-b]quinoxalin-11-one. It was characterized by spectroscopic and single crystal X-ray diffraction techniques. In a semi-aqueous (MeOH/HEPES) system, LH displayed a characteristic chromogenic change from colorless to yellow upon adding Cu2+ ion, with the appearance of a new peak at λmax = 460 nm. A 1:1 binding stoichiometry between LH and Cu2+ ion has been found, with LOD = 2.3 μM (145 ppb) and LOQ = 8 μM (504 ppb). Based on experimental results the formula of [Cu(L)Cl(H2O)2] (1) was assigned and this in-situ generated 1 was found to exhibit a discoloration of upon gradual addition of cysteine (LOD = 60 nM) as well as ATP (LOD = 130 nM) having 1:2 and 1:1 stoichiometry respectively. The LH was useful for recognition of Cu2+ ion in real water samples and on filter paper strips. A two-input-two-output logic gate circuitry was also constructed by employing 1 and cysteine. The DFT/TDDFT calculations performed on LH and 1 were consistent with experimental findings. The binding affinity of LH towards HSA and BSA were determined with HSA having greater affinity than BSA, which was also supported by theoretical calculations.

An aqueous mediated ultrasensitive facile probe incorporated with acrylate moiety to monitor cysteine in food samples and live cells

A colorimetric probe TQA ((E)-4-(((8-(sec-butoxy)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-9-yl)methylene)amino)benzylacrylate) possessing greater potent towards the sensing of cysteine was successfully synthesized and characterized. The aqueous soluble probe TQA detects Cys based on "ON-OFF" effect with excellent absorbance and emission properties. The probe TQA detects Cys up to its ultra-low level concentration of 1.5 nM and also quantifies the Cys up to 5.05 nM with the quicker response time of 140 s (2.3 min). In addition, the color change produced by the probe TQA on integrated with Cys was also identified easily via paper strip, cotton wool buds and RGB color picker app in smart mobiles. Further, the admirable selectivity and sensitivity of the probe TQA towards Cys extends its utility towards food samples and imaging of live HeLa cells.

A red-emitting Europium(III) complex as a luminescent probe with large Stokes shift for the sequential determination of Cu2+ and biothiols in real samples

In this work, a novel Eu³⁺-DTPA-bis(AMC) complex with red luminescence was designed and synthesized for sequential detection of Cu²⁺ and biothiols (Cys/Hcy/GSH) based on the displacement strategy with the good selectivity, high sensitivity, and large Stokes shift (288 nm). The possible detection mechanism was verified by UV-vis, the high-resolution mass spectrometry, and the fluorescence decay curve. The experimental parameters, including the solution pH, the incubation time, the concentration ratio of Eu³⁺-DTPA-bis(AMC) to Cu²⁺ and biothiols concentration, were optimized. Under the optimal conditions, it shows a good linear relationship between the concentration (0-10 μM) of Cu²⁺ and the fluorescence intensity of Eu³⁺-DTPA-bis(AMC), with a low detection limit of 0.065 μM. The linear range and the limit of detection of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system for Cys/Hcy/GSH were 2.5-22.5/5-45/5-50 μM and 0.11/0.07/0.05 μM, respectively. Surprisingly, the high or low concentration of Eu³⁺-DTPA-bis(AMC)/Cu²⁺ can significantly affect the selectivity of the sensing system to biothiols (Cys/GSH/Hcy). When the concentration of the Eu³⁺-DTPA-bis(AMC)/Cu²⁺ system is 10.0 μΜ, it could recognize biothiols (Cys/GSH/Hcy) from other substances, but when the concentration is as low as 3.3 μM, it could further specifically distinguished Cys from Hcy/GSH. Owing to the high anti-interference characteristics, accuracy and specificity, the sensing system was well applied to the cascade detection of Cu²⁺ in actual environmental samples and Cys in biological and food samples, including FBS, urine, milk, beverage, fresh juice with the satisfactory recoveries from 96.20 to 106.80 %.

Novel selective "on-off" fluorescence sensor based on julolidine hydrazone-Al3+ complex for Cu2+ ion: DFT study

A hydrazone (T1) was synthesized by reacting 8-hydroxyjulolidine-9-carboxaldehyde with 2-furoic hydrazide and then modified with Al³⁺ ion to form a novel hydrazone Al³⁺ complex (T1-Al³⁺) in an aqueous solution (8% propylene glycol in 10 mM HEPES pH 5.5). The T1-Al³⁺ complex was studied as a Cu²⁺ selective sensor due to its highly efficient capacibility of paramagnetic quenching. The results showed that the T1-Al³⁺ complexed sensor possesses remarkable sensitivity and selectivity for Cu²⁺ ion in 8% propylene glycol in 10 mM HEPES pH 5.5 as compared with other tested analytes. Notably, this sensor has a broad linear detection range of 10-110 µM for Cu²⁺ ion and a detection limit level of 0.62 µM, which is lower than the Cu²⁺ concentration threshold in drinking water designated by the United States Environmental Protection Agency (EPA). Additionally, it was detectable for the presence of Cu²⁺ ion in mineral water and tap water samples. The selectivity of T1-Al³⁺ complexed sensor with Cu²⁺ ion could be explained by the basis of computation with Gaussian software complied with the basis sets of B3LYP/6-31 G(d,p)/LANL2DZ. Furthermore, only T1 exhibited anticancer efficacy against HeLa and U251 cells with MTT assay.

A novel nanocomposite (g-C3N4/Fe3O4@P2W15V3) with dual function in organic dyes degradation and cysteine sensing

Among the important needs of human societies is the elimination of environmental pollution and also the construction of high-performance and inexpensive biosensors. In this regard, the construction of multi-functional composites has been considered. A novel magnetic graphite carbon nitride decorated by tri-vanadium substituted Dawson-type heteropolytungstate nanocomposite (C₃N₄/Fe₃O₄@P₂W₁₅V₃) effectively synthesized and characterized by prevalent functional analysis. The prepared nano-catalyst presents bi-functional usage involving photocatalytic removal of dyes (methylene blue, congo red and phenyl red) (around 98%) under visible light radiation and greatly sensitive colorimetric sensing of cysteine in an aqueous media. Moreover, synthesized nano-catalyst successfully recovered five times without any considerable deficiency on its photocatalytic ability. Further, Moreover, we propose a novel method for cysteine detection based on the C₃N₄/Fe₃O₄@P₂W₁₅V₃ nanocomposite. This nanocomposite displayed a privileged catalytic feature for cysteine oxidation to extend a clock reaction of methylene blue as an indicator in the presence of NaBH₄ in acidic solution. More importantly, this colorimetric sensing method of cysteine presents an easy, low-cost, selective, and rapid colorimetric assay with a detection limit value of 7.2 μM in the acceptable linear range of 5-600 μM.

BODIPY-Hg2+ Complex: A Fluorescence "Turn-ON" Sensor for Cysteine Detection

A BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) based pioneering sensing material (HLPy) having 2-amino pyridine as receptor was synthesized and used for the selective detection of Hg2+ ions. The synthesized HLPy features a high affinity towards Hg2+ (ka = 2.04 × 105 M-1), accompanied by effective quenching of fluorescence in DMF:H2O (1:9 v/v, 10 mM HEPES buffer, pH 7.4) with 54 nM limit of detection (LOD). The emission titration experiments (Job's plot) in the presence of varying mole-fraction of Hg2+ ions reveals the formation of non-fluorescent 2:1 coordination complex [Hg(LPy)2]. The resulting non-fluorescent [Hg(LPy)2] was thoroughly characterized using various spectroscopic techniques and analyses. Interestingly, the non-fluorescent complex [Hg(LPy)2] is able to specifically respond towards Cys over other biothiols and amino acids through a reversible de-complexation mechanism. As a result, the remarkable recovery of the fluorescence can be observed. The limit of detection (LOD) for Cys detection is estimated to be 29 nM in DMF:H2O (1:9 v/v, 10 mM HEPES buffer, pH 8.0). The reversibility and reusability of [Hg(LPy)2] were achieved by the sequential addition of Cys and Hg2+ ions up to five cycles. Moreover, the removal of Hg2+ ions up to 89% from aqueous samples using HLPy was successfully demonstrated.

A 4,5-quinolimide-based fluorescent sensor for sequential detection of Cu2+ and cysteine in water and living cells with application in a memorized device

In this study, a new 4,5-quinolimide-based fluorescent sensor BNC was synthesized and characterized. BNC showed single selectivity for Cu²⁺via the "turn-off" fluorescence among various common metal ions. After forming a 1:1 stoichiometric complex with Cu²⁺, the detection limit (LOD) of BNC for Cu²⁺ was measured to be 0.44 μM. Subsequently, the in situ generated BNC-Cu²⁺ complex had been used for sensing Cys with the LOD of 1.5 μM through the displacement strategy, resulting in the revivable emission of BNC. According to the "off-on-off" fluorescence cycle of BNC generated by the alternate addition of Cu²⁺ and Cys, a reversible memorized device with "read-write-read-erase" behavior was constructed at the molecular level. Furthermore, the recoveries of Cu²⁺ in lake water with BNC were in the range of 95.0-105%. And sequential fluorescence imagings of BNC for Cu²⁺ and Cys were successfully applied in living yeast cells.

A Copper (II) Ensemble-Based Fluorescence Chemosensor and Its Application in the 'Naked-Eye' Detection of Biothiols in Human Urine

Quick and effective detection of biothiols in biological fluids has gained increasing attention due to its vital biological functions. In this paper, a novel reversible fluorescence chemosensor (L-Cu2+) based on a benzocoumarin-Cu2+ ensemble has been developed for the detection of biothiols (Cys, Hcy and GSH) in human urine. The chemosensing ensemble (L-Cu2+) contains a 2:1 stoichiometry structure between fluorescent ligand L and paramagnetic Cu2+. L was found to exclusively bond with Cu2+ ions accompanied with a dramatic fluorescence quenching maximum at 443 nm and an increase of an absorbance band centered at 378 nm. Then, the in situ generated fluorescence sluggish ensemble, L-Cu2+, was successfully used as a chemosensor for the detection of biothiols with a fluorescence "OFF-ON" response modality. Upon the addition of biothiols, the decomplexation of L-Cu2+ led to the liberation of the fluorescent ligand, L, resulting in the recovery of fluorescence and absorbance spectra. Studies revealed that L-Cu2+ possesses simple synthesis, excellent stability, high sensitivity, reliability at a broad pH range and desired renewability (at least 5 times). The practical application of L-Cu2+ was then demonstrated by the detection of biothiols in human urine sample.

A long-lived Donor-Acceptor fluorescent probe for sequential detection of Cu2+ and biothiols

A new long-lived Donor-Acceptor (D-A) fluorophore based on carbazolyl dicyanobenzene was developed as an ON-OFF-ON multifunctional fluorescent probe 1 for sequential detection of Cu²⁺ and biothiols (Cys, Hcy and GSH). The fluorescence of probe 1 can be significantly and selectively quenched by Cu²⁺. Meanwhile, the fluorescence lifetime decreased from 2.1 μs to 18.5 ns. The limit of detection was determined to be 33.6 nM. Upon addition of biothiols (Cys, Hcy and GSH), the generated ensemble 1-Cu²⁺ displayed a "turn-on" fluorescent response at 555 nm and an obvious recovery in fluorescence lifetime and UV-vis absorption within 1 min. The limit of detection for Cys, Hcy and GSH were calculated by fluorescence titration experiments to be 0.19, 0.21 and 0.29 μM, respectively. The ensemble 1-Cu²⁺ was further successfully applied in bioimaging.

A coumarin-containing Schiff base fluorescent probe with AIE effect for the copper(ii) ion

A novel coumarin-derived Cu²⁺-selective Schiff base fluorescent “turn-off” chemosensor CTPE was successfully obtained, which showed an AIE effect. It could identify Cu²⁺ by quenching its fluorescence. The lower limit of detection was 0.36 μM. CTPE can act as a highly selective and sensitive fluorescence probe for detecting Cu²⁺.

A novel coumarin-derived Schiff base fluorescent “turn-off” chemosensor with AIE effect showed selectivity towards Cu²⁺. The recognition mechanism is presented.

A novel and effective benzo[d]thiazole-based fluorescent probe with dual recognition factors for highly sensitive and selective imaging of cysteine in vitro and in vivo

Double recognition groups significantly improved the selectivity of a fluorescent probe to Cys in living cells.