A ferrocene-based chemo-dosimeter for colorimetric and electrochemical detection of cyanide and its estimation in cassava flour

A simple chemo-dosimeter VDP2 bearing a ferrocene moiety was designed, synthesized, and characterized, and exhibited both chromogenic and electrochemical responses selectively for CN- in H2O-DMSO (9 : 1, v/v) medium. The probe VDP2 showed an instantaneous color change from colorless to yellow with CN- that can readily be observed visually. The deprotonation of the benzimidazole -NH, followed by nucleophilic addition of CN- to the olefinic C-atom, as evidenced by 1H and 13C NMR titration experiments, caused the colorimetric and electrochemical responses. The mass spectral study, CV, FTIR and Mulliken charges computed well supported the proposed mechanism. The electrochemical limit of detection was calculated to be 72 nM. The results of DFT and TD-DFT calculations suggested that the colorless nature of the probe VDP2 is due to weak intramolecular charge transfer (ICT) transition and the yellow color of the VDP2+CN adduct is due to through-space ICT transition. Above all, the probe could be an ideal candidate for monitoring cyanide in water samples and cassava flour with practical significance. A simple and convenient colorimetric method was developed to determine cyanide content in cassava flour.

Efficient solid- and solution-state emissive reusable solvatochromic fluorophores for colorimetric and fluorometric detection of CN. Analyst 2024;149:1557-1570. [PMID: 38284868 DOI: 10.1039/d3an01697h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this work, a novel organic receptor, CPI [(E)-3-(4-(9H-carbazol-9-yl)phenyl)-2-(1H-benzo[d]imidazol-2-yl)acrylonitrile], was rationally designed and successfully fabricated for selective and sole recognition of CN- ions over other competitive anions through an obvious chromogenic and ratiometric emission change in DMSO. The distinct and prominent color change upon the addition of CN- can be attributed to the typical ICT process, which is induced by the deprotonation of acidic NH protons in the imidazole moiety. The sensor displayed strong solvatochromic effects in commonly used organic solvents such as n-hexane, toluene, diethyl ether, DCM, THF, DMF and DMSO. The chemical structure of the sensor was characterized by single-crystal X-ray diffraction, 1HNMR, 13CNMR, IR and mass spectroscopy. Significantly, the probe can function as a fluorescence-based sensor for the efficient detection of low-level water in organic solvents. The solid-state emission properties of CPI were successfully applied to recognise cyanide in a solid-state platform with naked eye-visualized distinct color change. The probe can be made reusable by adding TFA into the CN- treated probe solution. The detection limit of CPI towards CN- was determined to be 4.48 × 10-8 M. More importantly, the sensor is capable of detecting CN- in food samples and has been employed for wastewater treatment. Besides, easy-to-prepare CPI-coated test strips provide a simple, reusable and easy-to-handle protocol for the qualitative identification of CN- conveniently. Finally, density functional theory and time-dependent density functional theory were performed to verify the experimental outcomes theoretically.

A Coumarin-Hemicyanine Deep Red Dye with a Large Stokes Shift for the Fluorescence Detection and Naked-Eye Recognition of Cyanide

In this study, we synthesized a coumarin-hemicyanine-based deep red fluorescent dye that exhibits an intramolecular charge transfer (ICT). The probe had a large Stokes shift of 287 nm and a large molar absorption coefficient (ε = 7.5 × 105 L·mol-1·cm-1) and is best described as a deep red luminescent fluorescent probe with λem = 667 nm. The color of probe W changed significantly when it encountered cyanide ions (CN-). The absorption peak (585 nm) decreased gradually, and the absorption peak (428 nm) increased gradually, so that cyanide (CN-) could be identified by the naked eye. Moreover, an obvious fluorescence change was evident before and after the reaction under irradiation using 365 nm UV light. The maximum emission peak (667 nm) decreased gradually, whilst the emission peak (495 nm) increased gradually, which allowed for the proportional fluorescence detection of cyanide (CN-). Using fluorescence spectrometry, the fluorescent probe W could linearly detect CN- over the concentration range of 1-9 μM (R2 = 9913, RSD = 0.534) with a detection limit of 0.24 μM. Using UV-Vis spectrophotometry, the linear detection range for CN- was found to be 1-27 μM (R2 = 0.99583, RSD = 0.675) with a detection limit of 0.13 μM. The sensing mechanism was confirmed by 1H NMR spectroscopic titrations, 13C NMR spectroscopy, X-ray crystallographic analysis and HRMS. The recognition and detection of CN- by probe W was characterized by a rapid response, high selectivity, and high sensitivity. Therefore, this probe provides a convenient, effective and economical method for synthesizing and detecting cyanide efficiently and sensitively.

A new nitrile vinyl linked ultrafast receptor to track cyanide ions: Utilization on realistic samples and HeLa cell imaging

A simple D - A (donor - acceptor) type receptor ((2E, 2'E)-3, 3'-(10-octyl-10H-phenothiazine-3,7-diyl)bis(2-(benzo[d]thiazol-2-yl)acrylonitrile)) (PBTA) containing nitrile-vinyl linkage was designed and completely characterized. The receptor PBTA detects CN^- ions based on "turn-off" effect with admirable spectral properties. It also owns some of the merits like "naked-eye" color change, ultrafast response (90 s), lowest detection limit (1.25 × 10^-10 M) as well as quantitation limit (4.17 × 10^-10 M) with the pH range 4-11 which is more suitable pH to make use of the receptor PBTA in physiological medium. The instant detecting ability of the receptor over CN^- ions was proved using paper test strip and cotton balls. Further, the utilization of the receptor PBTA was also extended to track CN^- ions in realistic samples (water and food samples) and in HeLa cells bioimaging.

AIE active luminous dye with a triphenylamine attached benzothiazole core as a portable polymer film for sensitively detecting CN- ions in food samples

Aggregation-induced emission (AIE) active 3-(3-(benzo[d]thiazol-2-yl)-2-hydroxyphenyl)-2-(4'-(diphenylamino)-[1,1'-biphenyl]-4-yl)acrylonitrile (BTPA) has been designed and synthesized herein, with the goal of detecting CN^- ions at a low-level in semi-aqueous medium. The deliberate addition of the electron-deficient alkene BTPA increased its sensitivity and selectivity to CN^- ions, with a better detection limit of 6.4 nM, unveiling the next-generation approach to creating sophisticated CN^- ions selective chemosensors. The ESI-MS and NMR spectra analyses provided strong support for the structures of the chemosensors, while the UV-Vis, photoluminescence, and ¹H-NMR titration experiments provided support for the sensing efficiencies. Subsequently, PVDF/BTPA electrospun nanofibers have been effectively produced as functional films. These nanofiber films exhibit outstanding mechanical strength, photo/thermal stability, and optical responsiveness to CN^- ions, making them a potential choice for on-field emerging contaminant detection.

Selective visualization of cyanide in food, living cells and zebrafish by a mitochondria targeted NIR-emitting fluorescent probe

Cyanide is a highly toxic substance, and the detection of cyanide in the environment and food samples is critical to public health care. Herein, we rationally designed a mitochondria-targeted near-infrared fluorescent probe BTC for ratiometric monitoring of CN^- in water, food, living cells, and zebrafish. BTC exhibits a remarkable colorimetric ratiometric fluorescence response to CN^- with high selectivity, low detection limit (54.3 nM), and large Stokes shift. The cyanide sensing mechanism was demonstrated by NMR and ESI-MS analysis and density functional theory (DFT). More importantly, BTC was used for efficient naked-eye colorimetric detection of CN^- in sprouting potatoes, almonds, and ginkgo fruit samples. Further, the BTC is capable of situ tracking and imaging cyanide in mitochondria of SMMC-7721 cells and in zebrafish via dual emission channels, and was prepared into a kit for convenient and visual on-site sensing of cyanide in food samples.

A highly selective and sensitive salamo-salen-salamo hybrid fluorometic chemosensor for identification of Zn2+ and the continuous recognition of phosphate anions

A salamo-salen-salamo hybrid fluorescent chemical sensor (H₄L) was synthesized and characterized. It exhibits high selectivity and sensitivity to Zn²⁺ in physiological pH range. Meanwhile, its zinc(II) complex (L-Zn²⁺) continuously responses phosphate anions in DMF/H₂O (v/v, 9:1) solution. Moreover, the identification processes are explored using characterization methods such as UV-absorption spectra, IR spectra and ESI-MS spectrum. In addition, the coordination mechanism of H₂PO₄^- and Zn²⁺ were successfully exploited to make the chemical sensor reproducible. In short, the sensors H₄L and L-Zn²⁺ will be promising detection devices for Zn²⁺ and phosphate anions.

Aggregation induced emission based fluorenes as dual-channel fluorescent probes for rapid detection of cyanide: applications of smartphones and logic gates

Rational modification of molecular structure by incorporating electron donating groups can play a potential role for designing aggregation induced emission (AIE) active fluorescent probes. Based on this principle, fluorescent probes (1a–c) were synthesized, and they displayed excellent aggregation induced emission (AIE) behavior in a H₂O/DMF (4 : 1, v/v) mixture due to restrictions in intramolecular charge transfer (ICT). As a comparison, probe 1d was synthesized by installing an electron withdrawing (–NO₂) group that surprisingly quenched the aggregation behaviour. Additionally, AIE active probes 1a–c displayed a highly sensitive dual channel (fluorometric and colorimetric) response towards rapid detection of CN⁻, which is an active toxic material. Probes 1a–c showed selectively enhanced fluorescence emission behavior towards CN⁻ with detection limits of 1.34 ppb, 1.38 ppb, and 1.54 ppb, respectively. The sensing mechanism involves Michael type adduct formation due to the nucleophilic addition reaction of cyanide with probes and was confirmed through ¹H NMR titration experiments. In contrast, probe 1d containing an electron withdrawing moiety showed insensitivity towards CN⁻. Therefore, this study provides the efficient strategy to induce AIE character in fluorescent probes and expands the mechanistic approach toward the sensing of toxic CN⁻.

Rational modification of molecular structure by incorporating electron donating groups can play a potential role for designing aggregation induced emission (AIE) active fluorescent probes.

Blue-Emitting 2-(2'-Hydroxyphenyl)benzazole Fluorophores by Modulation of Excited-State Intramolecular Proton Transfer: Spectroscopic Studies and Theoretical Calculations

This article describes the synthesis, spectroscopic studies, and theoretical calculations of nine original fluorophores based on the 2-(2'-hydroxyphenyl)benzazole (HBX) scaffold, functionalized at the 4-position of the phenol ring by ethynyl-extended aniline moieties. HBX dyes are well-known to display an excited-state intramolecular proton transfer (ESIPT) process, owing to a strong six-membered hydrogen bond in their structure that allows for an enol/keto tautomerism after photoexcitation. Appropriate electronic substitution can perturb the ESIPT process, leading to dual fluorescence, both excited tautomers emitting at specific wavelengths. In the examples described herein, it is demonstrated that the proton transfer can be finely frustrated by a modification of the constitutive heteroring, leading to a single emission band from the excited enol or keto tautomer or a dual emission with relative intensities highly dependent on the environment. Moreover, the nature of the functionalization of the N-alkylated aniline moiety also has a significant importance on the relative excited-state stabilities of the two tautomers in solution. To shed more light on these features, quantum chemical calculations by the density functional theory are used to determine the excited-state energies and rationalize the experimental spectroscopic data.

Ppb-Level, Dual Channel Sensing of Cyanide and Bisulfate Ions in Aqueous Medium: Computational Rationalization of Ion-Dependent ICT Mechanism

In this report, three oxidized diindolylarylmethane (DIAM) based chromogenic probes (designated as 1, 2, and 3) have been developed for the simultaneous and dual-channel detection of cyanide (LOD: 6.2 ppb)...

A bisspiropyran fluorescent probe for the selective and rapid detection of cyanide anion in liqueurs

A novel bisspiropyran-fluorescent probe was synthesized and applied in the selective and rapid CN− detection in liqueurs.

Dual Solution-/Solid-State Emissive Excited-State Intramolecular Proton Transfer (ESIPT) Dyes: A Combined Experimental and Theoretical Approach

Excited-state intramolecular proton transfer (ESIPT) dyes typically show strong solid-state emission, but faint fluorescence intensity is observed in the solution state owing to detrimental molecular motions. This article investigates the influence of direct (hetero)arylation on the optical properties of 2-(2'-hydroxyphenyl)benzoxazole ESIPT emitters. The synthesis of two series of ESIPT emitters bearing substituted neutral or charged aryl, thiophene, or pyridine rings is reported herein along with full photophysical studies in solution and solid states, demonstrating the dual solution-/solid-state emission behavior. Depending on the nature of substitution, several excited-state dynamics are observed: quantitative or partially frustrated ESIPT process or deprotonation of the excited species. Protonation studies revealed that pyridine substitution triggered a strong increase of quantum yield in the solution state for the protonated species owing to favorable quinoidal stabilization. These attractive features led to the development of a second series of dyes with alkyl or aryl pyridinium moieties showing strong tunable solution/solid fluorescence intensity. For each series, ab initio calculations helped rationalize and ascertain their behavior in the excited state and the nature of the emission observed by the experimental results.

Eco-friendly chitosan Schiff base as an efficient sensor for trace anion detection

Herein, a chitosan Schiff base sample (CSAN) was strategically designed and prepared via a two-step process. In the first step, an azo derivative of 1- naphthylamine namely, [2-hydroxy-5-(naphthalene-1-yldiazenyl) benzaldehyde] (HNDB) was synthesized as an aldehyde moiety. Then the condensation reaction of HNDB with chitosan afforded CSAN as the target product. Structural analyses of synthesized material were accomplished through FT-IR, ¹H NMR, UV-Vis, XRD, TGA, and SEM spectral methods. Meanwhile, the heterogeneous CSAN was able to detect the presence of hydrogen carbonate (HCO₃^-), acetate (AcO^-), and cyanide (CN^-) anions in semi-aqueous media (H₂O/DMSO; 10:90%, v/v). Moreover, the selectivity of CSAN towards CN^- anion was increased through variation in solvent mixture ratios. Thereupon, CSAN was explored as a promising sensor towards CN^- anion in an aqueous media through considerable color variation from colorless to pale yellow as well as quantitative chemical analysis. Overall, reliable CSAN chemosensor with high sensitivity for mentioned anions has a pivotal role in practical applications owing to it's reversibility ability.

A sensitive and selective BINOL based ratiometric fluorescence sensor for the detection of cyanide ions

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻). The optical study revealed that BBCN exhibited unique spectral changes only with cyanide ions in the presence of other competing ions. Besides, an apparent fluorescent colour change from green to blue was observed. A clear linear relationship was observed between the fluorescence ratiometric ratio of BBCN and the concentration of CN⁻ with a reasonably low detection limit (LOD) of 189 nM (507 ppb). The optical response was due to the nucleophilic addition of CN⁻ to the dicyanovinyl group of the sensor, which compromises the probe's intramolecular charge transfer. This mechanism was well confirmed by Job's plot, ¹H-NMR and ESI-MS studies. BBCN showed immediate spectral response towards (1 second) CN⁻ and detection could be realized in a broad pH window. Furthermore, the practical utility of BBCN was studied by test paper-based analysis and the detection of CN⁻ in various water resources.

A highly selective, novel BINOL based sensor BBCN has been developed for the fluorescent ratiometric detection of cyanide ions (CN⁻).

2-Aminophenols based Schiff bases as fluorescent probes for selective detection of cyanide and aluminium ions - Effect of substituents

Three Schiff base based probes are designed and synthesized by facile condensation of a commercially available fluorophore 2,6-diformyl-4-tert-butylphenol with 4-nitro-2-aminophenol (KP1), 2-aminophenol (KP2) and 4-tert-butyl-2-aminophenol (KP3) and are characterized using various spectral techniques. The probes exhibit high selectivity and sensitivity CN^- and Al(III) ions with striking fluorescent signaling responses in H₂O-DMSO (1:1, v/v) medium. The mechanism of the probes' detection of CN involves deprotonation of the phenolic OH group(s) followed by nucleophilic addition of CN^- onto imine C-atom. The ¹H NMR chemical shifts of the OH protons of 2-aminophenol moiety exhibits a linear correlation with the Hammett's substituent constants (σ_p), yielding a positive reaction constant (ρ). In KP1, the electron-withdrawing nitro substituent polarizes the imine bond to a larger extent than in KP2, resulting in easier addition of CN^- to imine C-atom. The electron releasing tert-Bu substituent in KP3 produces the opposite effect leading to a sluggish addition reaction. The separately populated HOMO and LUMO in KP1 and a relatively lower HOMO-LUMO energy gap indicate substantial intramolecular charge transfer (ICT) character, leading to weak fluorescence emission. The large reduction in HOMO-LUMO energy gap, in KP1, upon addition of cyanide is responsible for the greater enhancement in fluorescence with blue shift upon addition of CN^-. Formation of tetrahedral Probe-Al(III) complex prevents the isomerization of imine bond, leading to enhancement in fluorescence and contribution from chelation enhanced fluorescence. As these probes show very low limits of detection of these ions, their practical utility has also been demonstrated.

3-Hydroxy-2-naphthoic hydrazide as a probe for fluorescent detection of cyanide and aluminium ions in organic and aquo-organic media and its application in food and pharmaceutical samples

The commercially available fluorophore, 3-hydroxy-2-naphthoic hydrazide (RS2), has rationally been selected for the study, which displays a rapid fluorescent response and high sensitivity for CN^- and Al(III) ions in neat DMSO and H₂O-DMSO (1:1 v/v) media. The addition of CN^- to RS2 triggers an enhancement in fluorescence at 505 nm (green fluorescence), while the addition of Al(III) increases the fluorescence of the probe with a blue-shift of emission maximum by 25 nm (bluish-green fluorescence). The probe's action was investigated by ¹H NMR titrations that indicate deprotonation of OH and NH moieties by these ions. ²⁷Al NMR of RS2-Al(III) complex suggests an octahedral geometry for the complex. The sensitivity of the fluorescent-based assays in aq. DMSO medium, 0.8 µM for CN^- and 1.9 µM for Al(III) ions are far below the limits in the World Health Organization guidelines for drinking water. RS2 detects Al(III) by the chelation-enhanced fluorescence (CHEF) mechanism. Besides, RS2 was successfully applied to detect CN^- and Al(III) ions in food materials and pharmaceutical samples, respectively.

Impact of Heteroatom Substitution on Dual-State Emissive Rigidified 2-(2'-hydroxyphenyl)benzazole Dyes: Towards Ultra-Bright ESIPT Fluorophores*

2-(2'-Hydroxyphenyl)benzazole (HBX) fluorophores are well-known excited-state intramolecular proton transfer (ESIPT) emitters largely studied for their synthetic versatility, photostability, strong solid-state fluorescence and ability to engineer dual emission, thus paving the way to applications as white emitters, ratiometric sensors, and cryptographic dyes. However, they are heavily quenched in solution, due to efficient non-radiative pathways taking place as a consequence of the proton transfer in the excited-state. In this contribution, the nature of the heteroring constitutive of these rigidified HBX dyes was modified and we demonstrate that this simple structural modification triggers major optical changes in terms of emission color, dual emission engineering, and importantly, fluorescent quantum yield. Investigation of the photophysical properties in solution and in the solid state of a series of ethynyl-TIPS extended HBX fluorophores, along with ab initio calculations demonstrate the very promising abilities of these dyes to act as bright dual-state emitters, in both solution (even in protic environments) and solid state.

A simple organic probe for ratiometric fluorescent detection of Zn(II), Cd(II) and Hg(II) ions in aqueous solution via varying emission colours to distinguish one another

A bis (thiosemicarbazone) based probe has been synthesized and structurally characterized. The probe exhibits good selectivity towards Zn(II), Cd(II) and Hg(II) ions in an aqueous solution containing 95% water with ratiometric fluorescence changes. The modes of coordination of the probe with these metal ions and binding properties have been examined using different spectral techniques. The binding constants, determined using fluorescence titration data, are found to be 9.8 × 10³, 1.39 × 10⁵ and 2.03 × 10¹³ M^-1, respectively for Zn(II), Cd(II) and Hg(II) complexes. The high sensitivity of the probe has been demonstrated by the very low limit of detection i.e. 5.1, 3.4 and 0.51 μM for Zn(II), Cd(II) and Hg(II) ions, respectively. Different coordination mode of these metal ions with the probe has resulted in varying intra-ligand fluorescence (λ_em nm, Zn(II): 488, Cd(II): 470 and Hg(II): 578) among these metal complexes.

Multi-site probe for selective turn-on fluorescent detection of Al(III) in aqueous solution: synthesis, cation binding, mode of coordination, logic gate and cell imaging

An easy to make organic probe (hereafter called as R) possessing multiple ligating sites have been synthesized and characterized using spectral techniques. The probe exhibits selective and sensitive turn-on fluorescence response with Al(III) in aqueous dimethylformamide (DMF) (1:1 v/v) solution. Fluorescence titration experiment shows that the probe binds with Al(III) with a 1:1 stoichiometry and a binding constant of 6.6 × 10⁴ M^-1.The mode of coordination of R with Al(III) has been established suing ²⁷Al and ¹H NMR studies and the results suggest formation of an octahedral complex been them. The suggested point of attachment of R with Al(III) corroborates well with Density Functional Theory (DFT) optimized structure and Mulliken charges computed. Chelation-enhanced fluorescence (CHEF) is proposed as the mechanism of enhancement of fluorescence upon addition of Al(III) to R. The probe detects Al(III) in aqueous solution with a detection limit of 0.2 μM, which is much lower than the permissible limit of Al(III) set by the World Health Organization (WHO).The probe works in a wide pH range (4-11) and thus makes it a suitable candidate for environmental and biological applications. The fluorescence signals of R were used to construct an INHIBIT molecular logic gate. The confocal fluorescence microscope experiments show that R could be employed as a fluorescent probe for detecting Al(III) in living cells.

A simple fluorophore-imine ensemble for colorimetric and fluorescent detection of CN- and HS- in aqueous solution

Colorimetric and fluorescent detection of cyanide and hydrogen sulfide ions has been effected using a simple organic probe in H₂O:DMSO (20:80, v/v) medium. The probe exhibits a colour change from pale-yellow to red upon addition of these analytes under normal light and fluorescent change from green to red under UV lamp. Other competitive ions show no observable colour or fluorescence change. The binding constants of cyanide and hydrogen sulfide ions with the probe determined using fluorescence titration data are found to be 2.1 × 10⁴ and 1.6 × 10⁴ M^-1, respectively. The probe fluorimetrically detects the analytes in a wide pH range (4-10). ¹H and ¹³C NMR studies suggest that the probe senses cyanide ion through deprotonation and nucleophilic addition mechanism and hydrogen sulfide ion via deprotonation mechanism. Detection limits of cyanide and hydrogen sulfide are determined to be 0.15 and 1 μM, respectively. The practical utility of the probe has been demonstrated by same dual mode detection of cyanide in food materials like bitter almond, cassava flour and sprouting potato.

A novel ratiometric fluorescent probe for "naked-eye" detection of sulfite ion: Applications in detection of biological SO32- ions in food and live cells

A new "turn-on" luminescent probe PI has been designed and synthesized for the selective detection of sulfite ions based on the mechanism of nucleophilic addition. The designed probe PI owns naked eye detection, excellent selectivity, sensitivity, rapid response (150 s) and low limits of detection (LOD) of 0.57 μM, which is an agreeable limit by the world wide expert food additive committees. Furthermore, the probe PI was used to recognize the sulfite ions level in realistic samples and live cells.

Pyridine-hydrazone-controlled cyanide detection in aqueous media and solid-state: tuning the excited-state intramolecular proton transfer (ESIPT) fluorescence modulated by intramolecular NH⋯Br hydrogen bonding

A new efficient pyridine-hydrazone-substituted naphthalimide receptor 4a-E has been synthesized as a selective colorimetric and fluorescent chemosensor for cyanide sensing in aqueous environments through a unique ESIPT mechanism.

Self-assembled star-shaped aza-BODIPY mesogen affords white-light emission

A star-shaped aza-BODIPY mesogen exhibits LC, gel, WLE and chemosensor properties.

Near-infrared ratiometric self-assembled theranostic nanoprobe: imaging and tracking cancer chemotherapy

A novel near-infrared ratiometric fluorescent theranostic nanoprobe is applied for real-time fluorescence tracking and imaging cancer therapy in vivo and in situ.

A highly sensitive and selective fluorescent turn-on chemosensor bearing a 7-diethylaminocoumarin moiety for the detection of cyanide in organic and aqueous solutions

Novel 7-diethylaminocoumarin based dyes showed high sensitivity and selectivity to cyanide anions in both organic and aqueous solutions, which was observed by a drastic increment in the emission intensity.

A new salamo-based colorimetric and fluorescent turn-on sensor with aggregation-induced emission for the rapid and highly sensitive detection of cyanide in real samples

A new, simple, and easy-to-manufacture highly selective and sensitive dual-mode sensor A1 with the aggregation-induced emission properties is used for CN⁻ colorimetric and fluorescence detection.

Copper Complex-Embedded Vesicular Receptor for Selective Detection of Cyanide Ion and Colorimetric Monitoring of Enzymatic Reaction

Detection of environmentally important ion cyanide (CN^-) has been done by a new method involving displacement of both metal and indicator, metal indicator displacement approach (MIDA) on the vesicular interface. Terpyridine unit was selected as the binding site for metal (Cu²⁺), whereas Eosin-Y (EY) was preferred as an indicator. About 150 nm sized nanoscale vesicular ensemble (Lip-1.Cu) has shown good selectivity and sensitivity for CN^- without any interference from other biologically and environmentally important anions. Otherwise, copper complexes are known for the interferences of binding with phosphates and amino acids. The Lip-1.Cu nanoreceptor also has the possibility to be used for real-time colorimetric scanning for the released HCN via enzymatic reactions. Lip-1.Cu has several superiorities over the other reported sensor systems. It has worked in 100% aqueous environment, fast response time with colorimetric monitoring of enzymatic reaction, and low detection limit.

A sensitive photoluminescent chemosensor for cyanide in water based on a zinc coordination polymer bearing ditert-butyl-bipyridine

Sensitive and direct sensing of cyanide in buffered aqueous solutions at pH = 7.0 by three new blue photoluminescent zinc-1,4-cyclohexanedicarboxylato coordination polymers bearing di-alkyl-2,2′-bipyridines has been achieved.