Synthesis and structural features of indium(III) furan-2-thiocarboxylates showing efficient catalytic activity toward multicomponent reactions via Knoevenagel condensation

A series of furan-2-thiocarboxylate complexes of indium(III), Et3NH[In(SCOf)4] (1), iPr2NH2[In(SCOf)4] (2), [In(2,2'-bipy)(SCOf)3] (3a), and [In(1,10-phen)(SCOf)3] (3b), have been synthesized and structurally characterized. Complex 4, [In(TMEDA)(SCOf)(SH)2], was obtained by the partial hydrolysis of [In(TMEDA)(SCOf)3] (3). Heterobimetallic complexes [(SCOf)2In(μ-SCOf)2Cu(PPh3)2] (5) and [(SCOf)2In(μ-SCOf)2Ag(PPh3)2] (6), were also synthesized and characterized. In an attempt to synthesize the binary compound, In(SCOf)3 (7), a thioester fCOSCH2SCOf (8) was obtained serendipitously; thus, a novel convenient approach for thioester synthesis is introduced. The catalytic activities of all the complexes were assessed for Knoevenagel condensation and Knoevenagel initiated MCRs for the synthesis of chromene and imidazopyrimidine derivatives and it was found that complex 2 is a very efficient catalyst (much superior to the previously reported ones).

4,6-Diamino-2-thiopyrimidine-based Cobalt Metal Organic Framework (Co-DAT-MOF): green, efficient, novel and reusable nanocatalyst for synthesis of multicomponent reactions

In this study, Co-DAT-MOF powder was prepared via the solvothermal method using 4, 6-diamino-2-thiopyrimidine as the organic linker and Co(NO₃)₂·6H₂O. The synthesized catalysts are characterized using XRD, FT-IR, TGA, SEM, BET, NH₃-TPD, and ICP-OES techniques. SEM analysis clearly indicated the formation of nanosheet microspheres. NH₃-TPD-MS was employed as a means of identifying the various strengths of acid sites and their relative abundance in an attempt to explain the effect of the catalyst surface acid sites. We identified a new acidic feature in Co-DAT-MOF catalyst, related to the presence of desorption peaks in the NH₃-TPD profiles. The activity of Co-DAT-MOF catalyst for the synthesis of multicomponent reactions correlates with lewis acidity. In addition, Co-DAT-MOF exhibited excellent performance for the synthesis of pyrroloacridine-1(2H)-one and chromeno [2, 3- d] pyrimidin-8-amines, as well as good reusability and recyclability.

Brønsted acid catalyzed mechanochemical domino multicomponent reactions by employing liquid assisted grindstone chemistry

Here, we have demonstrated a metal-free energy-efficient mechanochemical approach for expedient access to a diverse set of 2-amino-3-cyano-aryl/heteroaryl-4H-chromenes, tetrahydrospiro[chromene-3,4'-indoline], 2,2'-aryl/heteroarylmethylene-bis(3-hydroxy-5,5-dimethylcyclohex-2-enone) as well as tetrahydro-1H-xanthen-1-one by employing the reactivity of 5,5-dimethylcyclohexane-1,3-dione/cyclohexane-1,3-dione with TsOH⋅H₂O as Brønsted acid catalyst under water-assisted grinding conditions at ambient temperature. The ability to accomplish multiple C-C, C=C, C-O, and C-N bonds from readily available starting materials via a domino multicomponent strategy in the absence of metal-catalyst as well as volatile organic solvents with an immediate reduction in the cost of the transformation without necessitates complex operational procedures, features the significant highlights of this approach. The excellent yield of the products, broad functional group tolerances, easy set-up, column-free, scalable synthesis with ultralow catalyst loading, short reaction time, waste-free, ligand-free, and toxic-free, are other notable advantages of this approach. The greenness and sustainability of the protocol were also established by demonstrating several green metrics parameters.

Zn3Sb4O6F6 and KI-Doped Zn3Sb4O6F6: A Metal Oxyfluoride System for Photocatalytic Activity, Knoevenagel Condensation, and Bacterial Disinfection

Zn₃Sb₄O₆F₆ crystallites were synthesized by a pH-regulated hydrothermal synthetic approach, while doping on Zn₃Sb₄O₆F₆ by KI was performed by the "incipient wetness impregnation technique." The effect of KI in Zn₃Sb₄O₆F₆ is found with the changes in morphology in the doped compound, i.e., needle-shaped particles with respect to the irregular cuboid and granular shaped in the pure compound. Closer inspection of the powder diffraction pattern of doped compounds also reveals the shifting of Braggs' peaks toward a lower angle and the difference in cell parameters compared to the pure compound. Both metal oxyfluoride comprising lone pair elements and their doped compounds have been successfully applied as photocatalysts for methylene blue dye degradation. Knoevenagel condensation reactions were performed using Zn₃Sb₄O₆F₆ as the catalyst and confirmed 99% yield even at 60 °C temperature under solvent-free conditions. Both pure and KI-doped compounds were tested against several standard bacterial strains, i.e., Enterobacter sp., Escherichia coli, Staphylococcus sp., Salmonella sp., Bacillus sp., Proteous sp., Pseudomonas sp., and Klebsiella sp. by the "disk diffusion method" and their antimicrobial activities were confirmed.

Catalytic C-H Bond Activation and Knoevenagel Condensation Using Pyridine-2,3-Dicarboxylate-Based Metal-Organic Frameworks

Three 1D coordination polymers (CPs) [M(pdca)(H2O)2] n (M = Zn, Cd, and Co; 1-3), and a 3D coordination framework {[(CH3)2NH2][CuK(2,3-pdca)(pa)(NO3)2]} n (4) (2,3-pdca = pyridine-2,3-dicarboxylate and pa = picolinic acid), have been synthesized adopting a solvothermal reaction strategy. The CPs have been thoroughly characterized using various spectral techniques, that is, elemental analyses, FT-IR, TGA, DSC, UV/vis, and luminescence. Structural information on 1-4 was obtained by PXRD and X-ray single-crystal analyses, whereas morphological insights were attained through FESEM, AFM, EDX, HRTEM, and BET surface area analyses. Roughness parameters were calculated from AFM analysis, whereas dimensions of small domains and interplanar spacing were defined with the aid of HRTEM. CPs 1-3 are 1D isostructural networks, whereas 4 is a 3D framework. Moreover, 1-4 display moderate luminescence at rt. In addition, 1-4 have been applied as economic and efficient porous catalysts for the Knoevenagel condensation reaction and C-H bond activation under mild conditions with good yields (95-98 and 97-99%), respectively. Notably, 1-3 can be reused up to seven cycles, whereas 4 can be reused up to five catalytic cycles with retained catalytic efficiency. Relative catalytic efficacy toward the Knoevenagel condensation reaction follows in the order 2 > 1 > 3 > 4, whereas 2 > 4 > 1 > 3 for C-H activation. The present result demonstrates synthetic, structural, optical, morphological, and catalytic aspects of 1-4.

Ferrocene-Functionalized Dithiocarbamate Zinc(II) Complexes as Efficient Bifunctional Catalysts for the One-Pot Synthesis of Chromene and Imidazopyrimidine Derivatives via Knoevenagel Condensation Reaction

Four new mononuclear/coordination polymeric (CP) zinc(II) complexes (1-4) of ferrocenyl/pyridyl-functionalized dithiocarbamate ligands, N-ferrocenylmethyl-N-butyl dithiocarbamate (L1), N-ferrocenylmethyl-N-ethylmorpholine dithiocarbamate (L2), N-ferrocenylmethyl-N-2-(diethylamino)ethylamine dithiocarbamate (L3), and N-4-methoxybenzyl-N-3-methylpyridyl dithiocarbamate (L4), have been synthesized and characterized by elemental analyses, IR, UV-vis, and ¹H and ¹³C{¹H} NMR spectroscopic techniques. The solid-state structures of complexes 1, 3, and 4 have been determined by single-crystal X-ray crystallography as well as powder X-ray diffraction. Single-crystal X-ray crystallography revealed a monomeric structure for complex 1 but 1D polymeric structures for complexes 3 and 4. In all complexes, dithiocarbamate ligands are bonded to the Zn(II) metal ion in a S^S chelating mode, and in the CPs, N atoms on the 2-(diethylamino)ethylamine and 3-pyridyl functionalities in the ligands on the neighboring molecules are also bonded to metal centers, leading to the formation of either a discrete tetrahedral molecule in 1 or 1D CP structures in 3 and 4. The Zn(II) metal centers in the polymeric structures exhibited either square-pyramidal or octahedral geometries. The supramolecular structures in these complexes are sustained via C-H···π (ZnCS₂, chelate; 3 and 4), C-H···π, and H···H interactions. The catalytic performances of complexes have also been assessed in the Knoevenagel condensation and one-pot multicomponent reactions. Catalysis results showed that the CP 3 acts as a heterogeneous bifunctional catalyst with excellent transformation efficiency at low catalyst loading.

Efficient One-Step Conversion of a Low-Grade Vegetable Oil to Biodiesel over a Zinc Carboxylate Metal-Organic Framework

In this study, a metal-organic framework, namely, Zn3(BTC)2 (BTC = 1,3,5-benzenetricaboxylic acid), was solvothermally synthesized and employed as a catalyst for biodiesel production from degummed vegetable oil via a one-step transesterification and esterification reaction. The resulting Zn3(BTC)2 particles exhibit a well-defined triclinic structure with an average size of about 1.2 μm, high specific surface area of 1176 m2/g, and thermal stability up to 300 °C. The response surface methodology-Box-Behnken design (RSM-BBD) was employed to identify the optimal reaction conditions and to model the biodiesel yield in relation to three important parameters, namely, the methanol/oil molar ratio (4:1-8:1), temperature (45-65 °C), and time (1.5-4.5 h). Under the optimized reaction conditions (i.e., 6:1 methanol/oil molar ratio, 65 °C, 4.5 h), the maximum biodiesel yield reached 89.89% in a 1 wt % catalyst, which agreed very well with the quadratic polynomial model's prediction (89.96%). The intrinsic catalytic activity of Zn3(BTC)2, expressed as the turnover frequency, was found to be superior to that of other MOF catalysts applied in the transesterification and esterification reactions. The reusability study showed that the as-synthesized Zn3(BTC)2 catalyst exhibited good stability upon three consecutive reuses without a noticeable decrease in the methyl ester yield (∼4%) and any appreciable metal leaching (<5%). Furthermore, a preliminary technoeconomic analysis showed that the total direct operating cost for the kilogram-scale production of Zn3(BTC)2 is estimated to be US$50, which may sound economically attractive.

Effect of Substituents on the Crystal Structures, Optical Properties, and Catalytic Activity of Homoleptic Zn(II) and Cd(II) β-oxodithioester Complexes

Five novel zinc(II) and cadmium(II) β-oxodithioester complexes, [Zn(L1)₂] (1), [Zn(L2)₂]_n (2), [Zn(L3)₂]_n (3) [Cd(L1)₂]_n (4), [Cd(L2)₂]_n (5), with β-oxodithioester ligands, where L1 = 3-(methylthio)-1-(thiophen-2-yl)-3-thioxoprop-1-en-1-olate, L2 = 3-(methylthio)-1-(pyridin-3-yl)-3-thioxoprop-1-en-1-olate, and L3 = 3-(methylthio)-1-(pyridin-4-yl)-3-thioxoprop-1-en-1-olate, were synthesized and characterized by elemental analysis, IR, UV-vis, and NMR spectroscopy (¹H and ¹³C{¹H}). The solid-state structures of all complexes were ascertained by single-crystal X-ray crystallography. The β-oxodithioester ligands are bonded to Zn(II)/Cd(II) metal ions in an O^∧S and N chelating/chelating-bridging fashion leading to the formation of 1D (in 2-4) and 2D (in 5) coordination polymeric structures, but complex 1 was obtained as a discrete tetrahedral molecule. Complex 4 crystallizes in the C2 chiral space group and has been studied using circular dichroism (CD) spectroscopy. The multidimensional assemblies in these complexes are stabilized by many important noncovalent C-H···π (ZnOSC₃, chelate), π···π, C-H···π, and H···H interactions. The catalytic activities of 1-5 in reactions involving C-C and C-O bond formation have been studied, and the results indicated that complex 3 can be efficiently utilized as a heterogeneous bifunctional catalyst for the Knoevenagel condensation and multicomponent reactions to develop biologically important organic molecules. The luminescent properties of complexes were also studied. Interestingly, zinc complexes 1-3 showed strong lumniscent emission in the solid state, whereas cadmium complexes 4 and 5 exhibited bright luminescent emission in the solution phase. The semiconducting behavior of the complexes was studied by solid-state diffuse reflectance spectra (DRS), which showed optical band gaps in the range of 2.49-2.62 eV.

Ultrasensitive detection of hydrogen peroxide and dopamine using copolymer-grafted metal-organic framework based electrochemical sensor

We reported the synthesis of a copolymer- and metal-organic framework-based electrochemical sensor, UiO-66-NH₂@P(ANI-co-ANA) using the polymerization method for the highly sensitive and selective detection of hydrogen peroxide (H₂O₂) and dopamine (DA). The as-synthesized material was characterized via Fourier transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The electrochemical characteristics of the proposed sensor were evaluated via impedance spectroscopy and cyclic voltammetry (CV). The electrochemical oxidation of DA and the reduction of H₂O₂ were determined via CV, square-wave voltammetry, and chronoamperometric techniques. The fabricated sensor exhibited a wide linear range of 25-500 μM, with a sensitivity of 1396.1 μAμM^-1cm^-2 and a limit of detection of 0.6 μM, for the electrochemical reduction of H₂O₂. Additionally, it exhibited a wide linear range of 10-110 μM, with a sensitivity of 1110.2 μAμM^-1cm^-2 and a limit of detection of 0.3 μM, for the electrochemical detection of DA. The practical utility of the fabricated sensor was evaluated via the detection of H₂O₂ in milk samples and DA in human urine samples.

Synthesis and catalytic activities of a Zn(ii) based metallomacrocycle and a metal-organic framework towards one-pot deacetalization-Knoevenagel tandem reactions under different strategies: a comparative study

Solvothermal reactions between a pyridine based amide functionalized dicarboxylic acid, 4,4'-{(pyridine-2,6-dicarbonyl)bis(azanediyl)}dibenzoic acid (H2L), and zinc(ii) nitrate in the absence and presence of a base produced the binuclear metallomacrocyclic compound [Zn2(L)2(H2O)4]·2(H2O)·6(DMF) (1) and the metallomacrocyclic based two dimensional MOF [Zn5(L)4(OH)2(H2O)4]n·8n(DMF)·4n(H2O) (2), respectively. Compound 1 bears two tetrahedral Zn(ii) centres, whereas the 2D framework 2 includes a penta-nuclear Zn(ii) cluster as a secondary building block unit, with two of the metal cations assuming a tetrahedral type geometry and the remaining three an octahedral type geometry. The topological analyses reveal that compound 1 has a 2-connected uninodal net and framework 2 has a 2, 8-connected binodal net. These compounds heterogeneously catalyse the tandem deacetalization-Knoevenagel condensation reactions carried out under conventional heating, microwave irradiation or ultrasonic irradiation. Comparative studies show that ultrasonic irradiation (final product yield of 99% after 2 h of reaction time) provides the most favourable method (e.g., microwave irradiation leads to a final product yield of 91% after 3 h of reaction time). Moreover, the catalysts can be reused at least for five consecutive cycles without losing activity significantly.