Graphene-based metal and nitrogen-doped carbon composites as adsorbents for highly sensitive solid phase microextraction of polycyclic aromatic hydrocarbons

Highly graphitized porous carbon/reduced graphene oxide for ultrahigh enrichment and ultrasensitive determination of polycyclic aromatic hydrocarbons

There is an urgent need to develop efficient and reliable coating materials for solid phase microextraction (SPME), in order to quantify and monitor pollutants in environmental waters. Herein, a highly graphitized porous carbon/reduced graphene oxide (PC/rGO) was successfully synthesized by pyrolysis of metal organic framework/graphene oxide precursors, and used as a SPME coating for ultrahigh enrichment of polycyclic aromatic hydrocarbons (PAHs) from water. The as-prepared PC/rGO exhibited high degree of graphitization, abundant number of micro/mesopores along with exceptional thermal stability, making it an ideal SPME coating material. The PC/rGO fiber offered an ultrahigh enrichment factor for PAHs (up to 126057), which could be attributed to the multiple interactions between the PC/rGO and PAHs, including hydrophobic and π-π interactions, partitioning, and mesopore filling effect. In the analysis of PAHs, the PC/rGO fiber showed a wide linearity (0.007-100 ng mL-1), low limits of detection (0.0005-0.005 ng mL-1), and good repeatability (RSDs <10.1%, n = 5) under optimized conditions. The established method was applicable for ultrasensitive determination of PAHs in different environmental waters and showed satisfactory recoveries. This study provides a novel way for constructing thermally stable SPME coating having efficient extraction performance.

Biochar nanosphere-functionalized carbon fibers for in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water followed by liquid chromatography and diode array detection

In order to improve the extraction ability of carbon fibers (CFs) for microextraction of polycyclic aromatic hydrocarbons (PAHs), biochar nanospheres derived from glucose were in-situ grown onto the surface of CFs via hydrothermal synthesis. The surface morphology and elemental composition of biochar nanospheres-CFs were investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. Thereafter, the biochar nanosphere-CFs were pulled into the polyetheretherketone tube for solid-phase microextraction, and the tube was combined with high-performance liquid chromatography-diode array detector to online detect PAHs. With the help of π-stacking, hydrophobic, and hydrophilic effect of biochar nanospheres, the extraction efficiency of CFs was greatly enhanced (enrichment factor increased by 293% compared with  the original). The conditions affecting the analytical performance (sampling volume, sampling rate, methanol content, and desorption time) were investigated. Under the optimal conditions, an online analytical method for microextraction and determination of several PAHs was developed, and satisfactory results were achieved. The limits of detection were 0.003-0.010 ng mL-1 owing to high enrichment effect (2973-3600), linearity ranged from  0.010-15.0 ng mL-1, and relative standard deviations were 0.4%-1.6% (intra-day) and 2.4%-4.4% (inter-day), respectively. The method was applied to analyze environmental water samples (rain water, snow water, and river water), and spiked recoveries within 80.0%-119% were obtained.

Biomass-Based Shape-Stabilized Composite Phase-Change Materials with High Solar-Thermal Conversion Efficiency for Thermal Energy Storage

To alleviate the increasing energy crisis and achieve energy saving and consumption reduction in building materials, preparing shape-stabilized phase-change materials using bio-porous carbon materials from renewable organic waste to building envelope materials is an effective strategy. In this work, pine cone porous biomass carbon (PCC) was prepared via a chemical activation method using renewable biomaterial pine cone as a precursor and potassium hydroxide (KOH) as an activator. Polyethylene glycol (PEG) and octadecane (OD) were loaded into PCC using the vacuum impregnation method to prepare polyethylene glycol/pine cone porous biomass carbon (PEG/PCC) and octadecane/pine cone porous biomass carbon (OD/PCC) shape-stabilized phase-change materials. PCCs with a high specific surface area and pore volume were obtained by adjusting the calcination temperature and amount of KOH, which was shown as a caterpillar-like and block morphology. The shape-stabilized PEG/PCC and OD/PCC composites showed high phase-change enthalpies of 144.3 J/g and 162.3 J/g, and the solar-thermal energy conversion efficiencies of the PEG/PCC and OD/PCC reached 79.9% and 84.8%, respectively. The effects of the contents of PEG/PCC and OD/PCC on the temperature-controlling capability of rigid polyurethane foam composites were further investigated. The results showed that the temperature-regulating and temperature-controlling capabilities of the energy-storing rigid polyurethane foam composites were gradually enhanced with an increase in the phase-change material content, and there was a significant thermostatic plateau in energy absorption at 25 °C and energy release at 10 °C, which decreased the energy consumption.

Facile fabrication of naphthalene-functionalized magnetic nanoparticles for efficient extraction of polycyclic aromatic hydrocarbons from environmental water and fish samples

In this study, naphthalene-modified magnetic nanoparticles (Fe3O4@Nap) were simply prepared based on specific chelation interaction between phosphate groups and metal ions on Fe3O4 surface. The resultant Fe3O4@Nap were characterized by FTIR, BET, SEM, TEM, NAM, TGA, and VSM techniques. With Fe3O4@Nap as adsorbent, the polycyclic aromatic hydrocarbons (PAHs) were efficiently extracted by magnetic solid-phase extraction (MSPE) from environmental water and fish samples through the π-π interaction between modified naphthalene groups and PAHs, followed by their determination by GC-MS/MS. The key parameters influencing the extraction efficiency were investigated. Under the optimized conditions, the Fe3O4@Nap-based MSPE/GC-MS/MS method proposed in this paper was evaluated and applied for analyzing PAHs in environmental water and fish samples. And the proposed MSPE/GC-MS/MS method exhibited good linearities for water samples (in the range of 0.1-10 ng/mL, R2 >0.9945) and for fish samples (in the range of 1-100 ng/g, R2 > 0.9905). The limits of detection (LODs) for water and fish samples were 0.004-0.031 ng/mL and 0.07-0.28 ng/g, respectively. Additionally, this method exhibited desirable accuracy and precision. The PAH recovery values from water and fish samples ranged from 81.5% to 109.6% with inter- and intra-day relative standard deviations (RSDs) of less than 12.8%. The MSPE/GC-MS/MS method was successfully applied to the analysis of real environmental water and fish samples. Overall, the newly synthesized Fe3O4@Nap exhibited high sensitivity, specificity, reusability, repeatability, and it could efficiently extract PAHs from environmental water and fish samples by MSPE.

Nitrogen-rich carbon nitride as solid-phase microextraction fiber coating for high-efficient pretreatment of polychlorinated biphenyls from environmental samples

A two-dimensional nitrogen-rich carbon nitrogen (C₃N₅) material was prepared via a facile high temperature thermal polymerization. For the first time, the C₃N₅ was used as fiber coating of solid-phase microextraction (SPME) to extract and preconcentrate polychlorinated biphenyls (PCBs) before gas chromatography (GC) analysis. The X-ray diffraction, N₂ adsorption-desorption, Fourier transform-infrared spectroscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy were performed to investigate structure, functional groups, thermal stability, bonding type, element composition, and atomic ratio of C₃N₅. The two-dimensional planar stacking structure was further verified by scanning electron microscopy and transmission electron microscopy. Five PCBs including PCB-4, PCB-12, PCB-29, PCB-52 and PCB-101 were selected as targets to evaluate performance of SPME fiber. Under the optimal conditions, the method showed a good linear range from 0.01 to 1000 ng/mL with the correlation coefficients (R²) higher than 0.9990. Enrichment factors of the method were obtained from 2045 to 3080. The limits of detection (LODs, S/N = 3) and limits of quantification (LOQs, S/N = 10) were calculated as 0.0031-0.0111 ng/mL and 0.01-0.05 ng/mL, respectively. The precisions of intra-day and inter-day were obtained with the relative standard deviations (RSDs) at 1.5-6.6% and 0.8-6.9%, respectively. The fiber-to-fiber producibility was achieved with RSDs ranged from 3.5% to 11.4%. The method was applied to detect PCBs in river water and soil samples. The contents were calculated at 0.040-0.147 ng/mL in water and 0.520-3.218 ng/g in soil. The C₃N₅ as SPME fiber coating material may be applied to extract and preconcentrate other environmental pollutants which have similar chemical structures with PCBs.

Membrane-protected covalent organic framework fiber for direct immersion solid-phase microextraction of 17beta-estradiol in milk

17beta-estradiol (E2) could accumulate in human body through milk and cause various diseases by interfering with the endocrine system. Herein, we coated stainless steel wire with covalent organic framework LZU1 (COF-LZU1) and Nafion protected by dialysis membrane for direct immersion solid phase microextraction (DI-SPME) and coupled with gas chromatography-flame ionization detection (GC-FID) for the detection of trace E2 in milk samples. With dialysis membrane protection, the stability of SPME fiber was improved and the extraction efficiency was only reduced by 7% after repeated use of 160 times. The extraction efficiency of E2 with the home-made fiber COF-LZU1 was 22.1, 8.4, 3.6 times higher than that of bare stainless steel wire, PDMS/DVB and PDMS, respectively. The method had been successfully applied to milk samples, and the relative recoveries were between 77.27% and 108.26%. It can provide an effective and general method for the pretreatment of complex matrix samples.

Zeolitic imidazolate frameworks in analytical sample preparation

Zeolitic imidazolate frameworks are a class of metal-organic frameworks that are topologically isomorphic with zeolites. Zeolitic imidazolate frameworks are composed of tetrahedrally coordinated metal ions connected by imidazolate linkers and have a high porosity and chemical stability. Here, we summarize the progress made in the application of zeolitic imidazolate frameworks in sample preparation for analytical purposes. This review is focused on analytical methods based on liquid chromatography, gas chromatography, or capillary electrophoresis, where the use of zeolitic imidazolate frameworks has contributed to increasing the sensitivity and selectivity of the method. While bulk zeolitic imidazolate frameworks have been directly used in analytical sample preparation protocols, a variety of strategies for their magnetization or their incorporation into sorbent particles, monoliths, fibers, stir bars, or thin films, have been developed. These modifications have facilitated the handling and application of zeolitic imidazolate frameworks for a number of analytical sample treatments including magnetic solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, or thin film microextraction, among other techniques.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Highly efficient porous sorbent derived from asphalt for the solid-phase extraction of polycyclic aromatic hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) are generated primarily during the incomplete combustion of organic matter and are ubiquitous environmental pollutants. For the first time, in this study, a mesoporous carbon derived from asphalt with high surface area (2300 m²g^-1 with an average of 1.2 cm³ g^-1) was utilized as a sorbent for the solid-phase extraction (SPE) of several PAHs in tap water samples. The factors influencing the extraction capability of the new material were investigated and the optimum conditions were determined to be as follows: Sample volume - 200 mL, no adjustment of sample pH, and sorbent amount - 50 mg. Under the most favorable SPE conditions, with gas chromatography-mass spectrometric analysis, the method exhibited a linear range of 0.5-50 μgL^-1 with limits of detection between 0.004 and 0.026 μgL^-1. The recoveries obtained from spiked tap water samples spiked at 1 μgL^-1 and 5 μgL^-1, were in the range 86.7-98.2% with relative standard deviations of <9%. The method was also applied to tap water samples collected from the local environment. The concentrations of PAHs detected ranged between 0.13 and 48 μgL^-1. The reusability of the sorbent was tested with five consecutive SPE extraction, and no carryover of analytes was observed.

The effect of different binders on the comprehensive performance of solid phase microextraction fiber

Binders are significant components for the preparation of solid-phase microextraction (SPME) fibers. However, little attention has been paid to the effect of different binders. Considering their diverse properties, in this work, we select three kinds of commonly used binders including polydimethylsiloxane (PDMS), polyacrylonitrile (PAN) and Nafion, as well as introduce a new binder of poly (vinylidene fluoride) (PVDF) to synthetically study the influence of binders. By using the commercial active carbons (ACs) with different binders, four SPME fibers with uniform morphologies and comparative thicknesses (i.e., ACs-PDMS-coated, ACs-PAN-coated, ACs-Nafion-coated and ACs-PVDF-coated fibers) have been prepared successfully. The effect of binders on the pore structure of ACs is firstly investigated. It is found that PDMS and PAN would cause pore blocking, and the specific surface area of ACs coatings decreases from 1362 m² g^-1 to 280 and 196 m² g^-1, respectively. While the specific surface area of ACs-PVDF composite remains 940 m² g^-1. Based on SPME, the influences of acid/alkali, high temperature and matrix towards different fibers are further systematically surveyed. Finally, the enrichment performance of prepared fibers towards various organic pollutants is preliminarily discussed. The comparison results show that PVDF demonstrates outstanding stability in all aspects. Therefore, PVDF might be an excellent candidate for the preparation of SPME fiber. Moreover, all obtained results are expected to provide the reference value for the further development of novel SPME fibers.

Recent Advances in the Extraction of Polycyclic Aromatic Hydrocarbons from Environmental Samples

Polycyclic aromatic hydrocarbons (PAHs) comprise a group of chemical compounds consisting of two or more fused benzene rings. PAHs exhibit hydrophobicity and low water solubility, while some of their members are toxic substances resistant to degradation. Due to their low levels in environmental matrices, a preconcentration step is usually required for their determination. Nowadays, there is a wide variety of sample preparation techniques, including micro-extraction techniques (e.g., solid-phase microextraction and liquid phase microextraction) and miniaturized extraction techniques (e.g., dispersive solid-phase extraction, magnetic solid-phase extraction, stir bar sorptive extraction, fabric phase sorptive extraction etc.). Compared to the conventional sample preparation techniques, these novel techniques show some benefits, including reduced organic solvent consumption, while they are time and cost efficient. A plethora of adsorbents, such as metal-organic frameworks, carbon-based materials and molecularly imprinted polymers, have been successfully coupled with a wide variety of extraction techniques. This review focuses on the recent advances in the extraction techniques of PAHs from environmental matrices, utilizing novel sample preparation approaches and adsorbents.

Flower-like architecture magnesia-carbon composite material for highly sensitive solid-phase microextraction

The development of carbon sorbents with high specific surface areas remains a hot research field in analytical community. In the current study, a novel three-dimensional hierarchical flower-like magnesium glycollate sphere was synthesized. Then, the obtained magnesium glycollate sphere was carbonized to obtain magnesia-carbon composite material with enhanced performance. The flower-like carbon material exhibited good adsorption capacity towards polycyclic aromatic hydrocarbons due to the large surface area, the strong π-π interaction force and hydrophobic forces. The flower-like MgO&C material was used as a solid-phase microextraction fiber coating for the analysis of polycyclic aromatic hydrocarbons in real river water samples. Good linearity (5-1000 ng L^-1), satisfactory relatively recoveries (86.2-113.5%) and low limits of detections (0.01-0.20 ng L^-1) were obtained under the optimized conditions.

Fabrication of vanadium sulfide (VS4) wrapped with carbonaceous materials as an enhanced electrode for symmetric supercapacitors

Exploring electrode materials with excellent electrochemical performance is the key to the development of applications in energy storage and conversion. Herein, three-dimensional (3D) vanadium sulfide/carbon nanotubes/reduced graphene oxide (VS₄/CNTs/rGO) composite is synthesized by a simple one-step hydrothermal method. VS₄ short nanorods cover the both sides of the rGO sheets, and CNTs distribute at the edge of the composite to form a sandwich-like structure, which effectively prevents the accumulation of rGO. Due to the special 3D hierarchical structure, VS₄/CNTs/rGO exhibits a large specific surface area and a rich pore structure, and the addition of CNTs and rGO also improves the electrochemical properties of VS₄. At 1 A·g^-1, VS₄/CNTs/rGO exhibits a capacitance of 497 F·g^-1 (1374.0 C·g^-1) in the voltage range of -1.4 to 1.4 V, which is much higher than those binary materials including CNTs/rGO, VS₄/CNTs and VS₄/rGO. The VS₄/CNTs/rGO symmetric supercapacitor (SSC) device shows a remarkable electrochemical performance in a large potential window up to 2.2 V. The capacitance of VS₄/CNTs/rGO SSC device can reach 1003.5 mF·cm^-2 (2207.6 mC·cm^-2) at 0.5 mA·cm^-2, and it exhibits an energy density of 6.75 Wh·m^-2 (72.07 Wh·kg^-1) at a power density of 1.38 W·m^-2 (14.69 W·kg^-1). The high capacitance and energy density of the VS₄/CNTs/rGO composite in the high voltage interval make it as the potential energy storage material.

Rational synthesis of a ZIF-67@Co–Ni LDH heterostructure and derived heterogeneous carbon-based framework as a highly efficient multifunctional sulfur host

A core-shelled heterogeneous carbon-based framework induced a smooth “immobilization–diffusion–conversion–deposition” process of polysulfides and significantly improved the performance of Li–S batteries.

Applications of Graphene and Its Derivatives in Chemical Analysis

In this review, the applications of graphene and its derivatives in the chemical analysis have been described. The properties of graphene materials which are essential for their use in chemical and biochemical analysis are characterized. The materials are used in sensors and biosensors, in electrochemistry, in chromatography and in the sample preparation techniques. Chemical and electrochemical sensors containing graphene materials are useful devices for detecting some chemical and biochemical compounds. Chromatographic columns for HPLC with graphene containing stationary phases may be used for separation of polar and nonpolar components of some specific mixtures. Graphene materials could be successfully employed during sample preparation for analysis with SPE, magnetic SPE, and SPME techniques. HighlightsThe review of the applications of graphene (G) and its derivatives, graphene oxide (GO) and reduced graphene oxide (rGO), in chemical and biochemical analysis is proposed.The electron donor-acceptor and proton donor-acceptor interactions for the graphene based materials - analytes systems and their impact on the analysis results are discussed, particularly:    i) in electrochemistry,ii) in chromatography,iii) in modern sample preparation techniquesiv) in sensors of different types.The essence of the thermal stability and the nomenclature of the graphene based materials in their different applications in chemical systems of different classes was discussed (and suggested).The benefits of using SPME fibers with immobilized graphene materials have been presented in detail.

Meso-/microporous carbon as an adsorbent for enhanced performance in solid-phase microextraction of chlorobenzenes

There is urgent demand for the design of advanced coating materials for solid-phase microextraction (SPME) for water quality monitoring and assessment because of the global occurrence of chlorobenzenes (CBs). In this study, we proposed a dual-order activation method in which potassium hydroxide is used to modify pre-activated calcium citrate to synthesize a highly developed meso-/microporous carbon (MMC). The as-obtained MMC presented well-developed porosity with a super-high specific surface area (2638.09 m² g^-1), abundant meso-/micropores (0.5-10 nm), high hydrophobicity, excellent thermal stability (>720 °C), and a partly graphitized structure. As a coating material for headspace-SPME, the MMC-coated fiber exhibited outstanding extraction capability for CBs (up to 48.5 times higher than that of commercial fibers), which may be attributed to multiple interactions between the MMC and the pollutants, including size selectivity, micropore filling, π-π stacking and hydrophobicity. Finally, a satisfactory method using an MMC-coated fiber coupled with gas chromatography and electron capture detection was developed with good linearity (1-1000 ng L^-1, R² > 0.9982), high enrichment efficiencies (enrichment factors, 861-7819), low limits of detection (0.003-0.072 ng L^-1), excellent repeatability (0.7-5.3%) and reproducibility (1.7-5.1%), and outstanding recoveries (90.18-103.02%) when applied to determine trace CBs in real water samples. These results suggest that MMC is a promising coating material for the SPME of CBs.