Five-fold plasmonic Fano resonances with giant bisignate circular dichroism

Origin of plasmonic Fano resonance in metal-hole/split-ring-resonator metamaterials disclosed by temporal coupled-mode theory

In plasmonic Fano resonance, the interaction between a discrete plasmonic mode and a continuum of plasmonic mode gives rise to an asymmetric line shape in the scattering or absorption spectrum, enabling a wide range of applications such as sensing, switching, and slow light devices. Here, we establish a theoretical solution in the framework of temporal coupled-mode theory (TCMT) to study the three-dimensional (3D) and two-dimensional (2D) Fano resonances induced by strong coupling between metal hole (MH) and split ring resonator (SRR) array. We first separately analyze the transmission spectra of the MH array and SRR array under different polarized light excitation. We further investigate the electromagnetic field and charge density distribution corresponding to the resonant modes at the peak or valley wavelength of the transmission spectrum and figure out the electric/magnetic dipole feature of these resonance modes. We then establish a theoretical solution by TCMT for Fano resonances arising from the coupling of these modes. The calculated transmission spectrum is closely matching with the numerically simulated transmission spectrum for these Fano resonances in the MH-SRR array, which effectively elucidates that the asymmetry of the Fano resonances is caused by the coupling between bright and dark plasmonic modes involved in the two structures. Our results can help to understand the profound physics in such coupled plasmonic systems.

Broadband and high-efficiency polarization conversion with a nano-kirigami based metasurface

Nano-kirigami metasurfaces have attracted increasing attention due to their ease of three-dimension (3D) nanofabrication, versatile shape transformations, appealing manipulation capabilities and rich potential applications in nanophotonic devices. Through adding an out-of-plane degree of freedom to the double split-ring resonators (DSRR) by using nano-kirigami method, in this work we demonstrate the broadband and high-efficiency linear polarization conversion in the near-infrared wavelength band. Specifically, when the two-dimensional DSRR precursors are transformed into 3D counterparts, a polarization conversion ratio (PCR) of more than 90% is realized in wide spectral range from 1160 to 2030 nm. Furthermore, we demonstrate that the high-performance and broadband PCR can be readily tailored by deliberately deforming the vertical displacement or adjusting the structural parameters. Finally, as a proof-of-concept demonstration, the proposal is successfully verified by adopting the nano-kirigami fabrication method. The studied nano-kirigami based polymorphic DSRR mimic a sequence of discrete bulk optical components with multifunction, thereby eliminating the need for their mutual alignment and opening new possibilities.

Nanomembrane-assembled nanophotonics and optoelectronics: from materials to applications

Nanophotonics and optoelectronics are the keys to the information transmission technology field. The performance of the devices crucially depends on the light-matter interaction, and it is found that three-dimensional (3D) structures may be associated with strong light field regulation for advantageous application. Recently, 3D assembly of flexible nanomembranes has attracted increasing attention in optical field, and novel optoelectronic device applications have been demonstrated with fantastic 3D design. In this review, we first introduce the fabrication of various materials in the form of nanomembranes. On the basis of the deformability of nanomembranes, 3D structures can be built by patterning and release steps. Specifically, assembly methods to build 3D nanomembrane are summarized as rolling, folding, buckling and pick-place methods. Incorporating functional materials and constructing fine structures are two important development directions in 3D nanophotonics and optoelectronics, and we settle previous researches on these two aspects. The extraordinary performance and applicability of 3D devices show the potential of nanomembrane assembly for future optoelectronic applications in multiple areas.

Engineering Stress in Thin Films: An Innovative Pathway Toward 3D Micro and Nanosystems

Transformation of conventional 2D platforms into unusual 3D configurations provides exciting opportunities for sensors, electronics, optical devices, and biological systems. Engineering material properties or controlling and modulating stresses in thin films to pop-up 3D structures out of standard planar surfaces has been a highly active research topic over the last decade. Implementation of 3D micro and nanoarchitectures enables unprecedented functionalities including multiplexed, monolithic mechanical sensors, vertical integration of electronics components, and recording of neuron activities in 3D organoids. This paper provides an overview on stress engineering approaches to developing 3D functional microsystems. The paper systematically presents the origin of stresses generated in thin films and methods to transform a 2D design into an out-of-plane configuration. Different types of 3D micro and nanostructures, along with their applications in several areas are discussed. The paper concludes with current technical challenges and potential approaches and applications of this fast-growing research direction.

Reprogrammable optical metasurfaces by electromechanical reconfiguration

Metasurfaces, with artificially designed ultrathin and compact optical elements, enable versatile manipulation of the amplitude, phase, and polarization of light waves. While most of the metasurfaces are static and passive, here we propose a reprogrammable metasurface based on the state-of-art electromechanical nano-kirigami, which allows for independent manipulation of pixels at visible wavelengths through mechanical deformation of the nanostructures. By incorporating electrostatic forces between the top suspended gold nano-architectures and bottom silicon substrate, out-of-plane deformation of each pixel and the associated phase retardation are independently controlled by applying single voltage to variable pixels or exerting programmable voltage distribution on identical pixels. As a proof-of-concept demonstration, the metasurfaces are digitally controlled and a series of tunable metasurface holograms such as 3D dynamic display and ultrathin planar lenses are achieved at visible wavelengths. The proposed electromechanical metasurface provides a new methodology to explore versatile reconfigurable and programmable functionalities that may lead to advances in a variety of applications such as hologram, 3D displays, data storage, spatial light modulations, and information processing.

Role of electric currents in the Fano resonances of connected plasmonic structures

In this work, we use finite elements simulations to study the far field properties of two plasmonic structures, namely a dipole antenna and a cylinder dimer, connected to a pair of nanorods. We show that electrical, rather than near field, coupling between the modes of these structures results in a characteristic Fano lineshape in the far field spectra. This insight provides a way of tailoring the far field properties of such systems to fit specific applications, especially maintaining the optical properties of plasmonic antennas once they are connected to nanoelectrodes. This work extends the previous understanding of Fano resonances as generated by a simple near field coupling and provides a route to an efficient design of functional plasmonic electrodes.

Kirigami/origami: unfolding the new regime of advanced 3D microfabrication/nanofabrication with "folding"

Advanced kirigami/origami provides an automated technique for modulating the mechanical, electrical, magnetic and optical properties of existing materials, with remarkable flexibility, diversity, functionality, generality, and reconfigurability. In this paper, we review the latest progress in kirigami/origami on the microscale/nanoscale as a new platform for advanced 3D microfabrication/nanofabrication. Various stimuli of kirigami/origami, including capillary forces, residual stress, mechanical stress, responsive forces, and focussed-ion-beam irradiation-induced stress, are introduced in the microscale/nanoscale region. These stimuli enable direct 2D-to-3D transformations through folding, bending, and twisting of microstructures/nanostructures, with which the occupied spatial volume can vary by several orders of magnitude compared to the 2D precursors. As an instant and direct method, ion-beam irradiation-based tree-type and close-loop nano-kirigami is highlighted in particular. The progress in microscale/nanoscale kirigami/origami for reshaping the emerging 2D materials, as well as the potential for biological, optical and reconfigurable applications, is briefly discussed. With the unprecedented physical characteristics and applicable functionalities generated by kirigami/origami, a wide range of applications in the fields of optics, physics, biology, chemistry and engineering can be envisioned.

Chiral response of a metasurface composed of nanoholes and tilted nanorods

Circular dichroism (CD) of metasurfaces has been used in biological monitoring, analytical chemistry, and perfect polarization converters. In this work, a metasurface consisting of nanoholes and tilted nanorods is proposed to achieve the CD effect. Numerical calculations show that electrical current forms between the film and the tilted nanorods under circularly polarized light illumination, and CD effects originate from the coupling between the current oscillations at the film and those on the tilted nanorods. This electrical oscillation mode provides unique coupling mechanisms for the CD effect. In addition, CD is strongly dependent on the structural parameters, and the resonant modes can be tuned by modulating the currents on the film. These results are helpful for designing novel chiral optical structures and provide unique methods for circular polarizers.