A morphological, enzymatic and metabolic approach to elucidate apoptotic-like cell death in fungi exposed to h- and α-molybdenum trioxide nanoparticles

Fungal biomineralization of toxic metals accelerates organic pollutant removal

Fungal biomineralization plays an important role in the biogeochemical cycling of metals in the environment and has been extensively explored for bioremediation and element biorecovery. However, the cellular and metabolic responses of fungi in the presence of toxic metals during biomineralization and their impact on organic matter transformations are unclear. This is an important question because co-contamination by toxic metals and organic pollutants is a common phenomenon in the natural environment. In this research, the biomineralization process and oxidative stress response of the geoactive soil fungus Aspergillus niger were investigated in the presence of toxic metals (Co, Cu, Mn, and Fe) and the azo dye orange II (AO II). We have found that the co-existence of toxic metals and AO II not only enhanced the fungal biomineralization of toxic metals but also accelerated the removal of AO II. We hypothesize that the fungus and in situ mycogenic biominerals (toxic metal oxalates) constituted a quasi-bioreactor, where the biominerals removed organic pollutants by catalyzing reactive oxygen species (ROS) generation resulting from oxidative stress. We have therefore demonstrated that a fungal/biomineral system can successfully achieve the goal of toxic metal immobilization and organic pollutant decomposition. Such findings inform the potential development of fungal-biomineral hybrid systems for mixed pollutant bioremediation as well as provide further understanding of fungal organic-inorganic pollutant transformations in the environment and their importance in biogeochemical cycles.

Optimization of Biodiesel Production Process Using MoO3 Catalysts and Residual Oil: A Comprehensive Experimental 23 Study

The study aimed to utilize MoO3 catalysts, produced on a pilot scale via combustion reaction, to produce biodiesel from residual oil. Optimization of the process was conducted using a 23 experimental design. Structural characterization of the catalysts was performed through X-ray diffraction, fluorescence, Raman spectroscopy, and particle size distribution analyses. At the same time, thermal properties were examined via thermogravimetry and differential thermal analysis. Catalytic performance was assessed following process optimization. α-MoO3 exhibited a monophasic structure with orthorhombic phase, whereas α/h-MoO3 showed a biphasic structure. α-MoO3 had a larger crystallite size and higher crystallinity, with thermal stability observed up to certain temperatures. X-ray fluorescence confirmed molybdenum oxide predominance in the catalysts, with traces of iron oxide. Particle size distribution analyses revealed polymodal distributions attributed to structural differences. Both catalysts demonstrated activity under all conditions tested, with ester conversions ranging from 93% to 99%. The single-phase catalyst had a long life cycle and was reusable for six biodiesel production cycles. The experimental design proved to be predictive and significant, with the type of catalyst being the most influential variable. Optimal conditions included α-MoO3 catalyst, oil/alcohol ratio of 1/15, and a reaction time of 60 min, resulting in high biodiesel conversion rates and showcasing the viability of MoO3 catalysts in residual oil biodiesel production.

Review on fate, transport, toxicity and health risk of nanoparticles in natural ecosystems: Emerging challenges in the modern age and solutions toward a sustainable environment

In today's era, nanoparticles (NPs) have become an integral part of human life, finding extensive applications in various fields of science, pharmacy, medicine, industry, electronics, and communication. The increasing popularity of NP usage worldwide is a testament to their tremendous potential. However, the widespread deployment of NPs unavoidably leads to their release into the environmental matrices, resulting in persistence in ecosystems and bioaccumulation in organisms. Understanding the environmental behavior of NPs poses a significant challenge due to their nanoscale size. Given the current environmental releases of NPs, known negative consequences, and the limited knowledge available for risk management, comprehending the toxicity of NPs in ecosystems is both awaiting and crucial. The present review aims to unravel the potential environmental influences of nano-scaled materials, and provides in-depth inferences of the current knowledge and understanding in this field. The review comprehensively summarizes the sources, fate, transport, toxicity, health risks, and remediation solutions associated with NP pollution in aquatic and soil ecosystems. Furthermore, it addresses the knowledge gaps and outlines further investigation priorities for the sustainable control of NP pollution in these environments. By gaining a holistic understanding of these aspects, we can work toward ensuring the responsible and sustainable use of NPs in today's fast-growing world.

Molybdenum inhibited the growth of Phytophthora nicotiana and improved the resistance of Nicotiana tabacum L. against tobacco black shank

Tobacco black shank (TBS) is a soil-borne fungal disease caused by Phytophthora nicotiana (P. nicotianae), significantly impeding the production of high-quality tobacco. Molybdenum (Mo), a crucial trace element for both plants and animals, plays a vital role in promoting plant growth, enhancing photosynthesis, bolstering antioxidant capacity, and maintaining ultrastructural integrity. However, the positive effect of Mo on plant biotic stress is little understood. This study delves into the inhibitory effects of Mo on P. nicotianae and seeks to unravel the underlying mechanisms. The results showed that 16.32 mg/L of Mo significantly inhibited mycelial growth, altered mycelial morphological structure, damaged mycelial cell membrane, and ultimately led to the leakage of cell inclusions. In addition, 0.6 mg/kg Mo applied in soil significantly reduced the severity of TBS. Mo increased photosynthetic parameters and photosynthetic pigment contents of tobacco leaves, upregulated expression of NtPAL and NtPPO resistance genes, as well as improved activities of SOD, POD, CAT, PPO, and PAL in tobacco plants. Furthermore, Mo could regulate nitrogen metabolism and amino acids metabolism to protect tobacco plants against P. nicotianae infection. These findings not only present an ecologically sound approach to control TBS but also contribute valuable insights to the broader exploration of the role of microelements in plant disease management.

Current Trends on the Effects of Metal-Based Nanoparticles on Microbial Ecology

The growing field of nanotechnology and its many applications have led to the irregular release of nanoparticles (NPs), with unintended effects on the environment and continued contamination of water bodies. Metallic NPs are used more frequently in extreme environmental conditions due to their higher efficiency, which attracts more attention in various applications. Due to improper pre-treatment of biosolids, inefficient wastewater treatment practices, and other unregulated agricultural practices continue to contaminate the environment. In particular, the uncontrolled use of NPs in various industrial applications has led to damage to the microbial flora and caused irreplaceable damage to animals and plants. This study focuses on the effect of different doses, types, and compositions of NP on the ecosystem. The review also mentions the impact of various metallic NPs on microbial ecology, their interactions with microorganisms, ecotoxicity studies, and dosage evaluation of the NPs, mainly focused on the review article. However, further research is still needed to understand the complexity of interactions between NPs and microbes in soil and aquatic ecosystems.

Pseudomonas fragi biofilm on stainless steel (at low temperatures) affects the survival of Campylobacter jejuni and Listeria monocytogenes and their control by a polymer molybdenum oxide nanocomposite coating

Pseudomonas spp. are widely distributed bacteria on surfaces in the food production and processing environment, where they form extracellular polymeric substance rich biofilms that interact with other bacteria. In this study, the influence of biofilm of Pseudomonas fragi ATCC 4973 on Listeria monocytogenes ATCC 19115 and Campylobacter jejuni NCTC 11168 was investigated at 5 °C and 15 °C on stainless steel in broth and food homogenates (fish or chicken meat). Stainless steel was then coated with PVDF-HFP/PVP/MoO₃ nanocomposite and examined for surface changes (scanning electron microscope, static contact angle, Vickers hardness and elastic modulus). The effect of the prepared nanocomposite coating on P. fragi and on L. monocytogenes and C. jejuni was evaluated in mono- and co-culture. P. fragi produced more biofilm at 15 °C than at 5 °C, especially when food homogenates were used as growth media. Co-cultivation with pathogens did not affect biofilm production by P. fragi, but significant changes were observed in L. monocytogenes and C. jejuni, resulting in a decrease and increase, respectively, in the determined number of culturable biofilm cells. The first change was probably due to competition for the surface, and the second to the oxygen gradient. Stainless steel was then coated with a PVDF-HFP/PVP/MoO₃ nanocomposite, which was characterised by lower roughness and higher wettability, but lower hardness compared to uncoated stainless steel. The prepared nanocoating showed bactericidal activity when tested in phosphate buffered saline. When used in food homogenates, a reduction of over 95 % in bacterial counts was observed. An abundant biofilm of P. fragi proved protective to L. monocytogenes and C. jejuni against the functionalised nanocomposite surface when tested in food homogenates. The control of spoilage Pseudomonas spp., which are common in the food production and processing environment, is important for reducing the contamination of food with spoilage bacteria and with pathogens such as L. monocytogenes and C. jejuni, which may be present in the same environment. The PVDF-HFP/PVP/MoO₃ nanocomposite showed good potential for use as a coating for food contact surfaces, but possible migration of nanoparticles from the nanocomposite coating to food should be evaluated before its commercial use.

Oxygen vacancy mediated α-MoO3 bactericidal nanocatalyst in the dark: Surface structure dependent superoxide generation and antibacterial mechanisms

Understanding bacteria inactivation mechanisms of nanomaterials on the surface molecular level is of prime importance for the development of antibacterial materials and their application in restraining the transmission of pathogenic microorganisms. This study prepared an oxygen vacancy-mediated bactericidal nanocatalyst α-MoO₃ which exhibited excellent antibacterial activity against Escherichia coli and Staphylococcus aureus in the dark. By manipulating the surface structure of α-MoO₃, the facile tuning of superoxide radical (•O₂^-) generation can be achieved, which was confirmed by electron paramagnetic resonance. •O₂^- disrupted bacterial membrane through attacking lipopolysaccharide (LPS) and phosphatidylethanolamine (PE). Intracellular reactive oxygen species (ROS) experiments confirm that oxidative stress induced by •O₂^- also played a vital role in bacterial inactivation, which might account for DNA damage verified by comet assays. The α-MoO₃ with rich oxygen vacancies also exhibited good antibacterial efficiency (＞99.00 %) toward airborne microbes under dark conditions, indicating its potential to impede the transmission of pathogenic microbes.

Antifungal potential of isoespintanol extracted from Oxandra xylopioides diels (Annonaceae) against intrahospital isolations of Candida SPP

The aim of this study was to evaluate the antifungal activity of isoespintanol (ISO) extracted from Oxandra xylopioides Diels (Annonaceae) against clinical isolates of Candida spp. Isoespintanol was obtained from the petroleum benzine extract of the leaves and was identified by nuclear magnetic resonance (NMR) and mass spectrometry (MS). For antifungal activity experiments, the broth microdilution method was used. The results show an inhibitory effect against Candida spp., with minimum inhibitory concentration (MIC) values between 450.4-503.3 μg/mL. Furthermore, the inhibitory effect of ISO against fungal biofilms is highlighted, even in some cases, greater than the effect shown by amphotericin B (AFB) and in others, where AFB showed no effect. Assays with fluorescent staining with acridine orange (AO) and ethidium bromide (EB), transmission electron microscopy (TEM), Evans blue, measurement of extracellular pH and leakage of intracellular material, evidenced damage at the level of fungal membranes and general cell damage, when cells were exposed to ISO, compared to untreated cells. The results of this research, serve as the basis for future studies in the establishment of the mechanisms of antifungal action of ISO, which could serve as an adjunct in the treatment of infections by these yeasts.

Epsilon poly-L-lysine as a novel antifungal agent for sustainable wood protection

There has been a growing interest in seeking natural and biobased preservatives to prevent the wood from deteriorating during its service life, thereby prolonging carbon storage in buildings. This study aims to assess the in vitro and in vivo antifungal properties of epsilon poly-L-lysine (EPL), a secondary metabolite from Actinomyces, against four common wood-inhabiting fungi, including two brown-rot fungi, Gloeophyllum trabeum (GT) and Rhodonia placenta (RP), and two white-rot fungi, Trametes versicolor (TV) and Irpex lacteus (IL), which has rarely been reported. Our results indicate that these fungi responded differently due to EPL treatment. From the in vitro study, the minimal inhibitory concentration of EPL against GT, TV, and IL was determined to be 3 mg/ml, while that of RP was 5 mg/ml. EPL treatment also affects the morphology of fungal hyphae, changing from a smooth surface with a tubular structure to twisted and deformed shapes. Upon EPL treatment with wood samples (in vivo), it was found that EPL could possibly form hydrogen bonds with the hydroxy groups in wood and was uniformly distributed across the transverse section of the wood samples, as indicated by Fourier transform infrared spectroscopy and fluorescence microscopy analyses, respectively. Compared with control wood samples with a mass loss of over 15% across different fungi, wood samples treated with 1% EPL showed negligible or very low (<8%) mass loss. In addition, the thermal stability of EPL-treated wood was also improved by 50%. This study suggests that EPL could be a promising alternative to traditional metallic-based wood preservatives.

Peculiarities of bioaccumulation and toxic effects produced by nanoparticles of molybdenum (VI) oxide under multiple oral exposure of rats: examination and comparative assessment

INTRODUCTION

Molybdenum (VI) oxide nanoparticles (MoO3 NPs) are widely used in various economic activities. This creates elevated risks of exposure to this nanomaterial for workers and population in general and, consequently, there can be an increased number of developing pathological changes caused by exposure to MoO3 NPs.

OBJECTIVE

To examine and comparatively assess peculiarities of bioaccumulation and toxic effects produced by MoO NPs under multiple oral introductions.

METHODS

We evaluated sizes of analyzed particles by scanning electronic microscopy; specific surface area was calculated by the method of Brunauer, Emmett and Taylor; the total pore volume, by Barrett, Joyner and Halenda. Rats were exposed as per the scheme introduced by Lim with colleagues. We examined biochemical and hematological blood indicators, molybdenum concentrations and pathomorphological changes in tissues of various organs 24 hours after the last exposure. The study involved comparison with effects produced by MoO3 microparticles.

RESULTS

The tested MoO3 sample was established to be a nanomaterial as per the whole set of its physical properties. 50% of animals in the exposed group died on the 16th day in the experiment after the total exposure dose of MoO3 NPs reached 6500 mg/kg of body weight. Having analyzed blood plasma, we determined the following. There was a growth in quantity of leukocytes and a share of segmented neutrophils and monocytes, which were by 1.76-3.50 times higher than in the control group. Activity of alanine aminotransferase, aspartate aminotransferase, alkaline phosphatase, gamma-glutamyl transpeptidase, alpha-amylase, and lactate dehydrogenase, and concentrations of urea, crude and direct bilirubin were higher by 1.61-22.86 times. Decrease in the number of platelets, plateletcrit, the relative number of lymphocytes, the number and proportion of large platelets by 1.31-2.71 times. We detected elevated molybdenum concentrations in the lungs, heart, liver, kidneys, brain and blood under exposure to MoO3 NPs in an amount exceeding the control values by 12.10-361.75 times. Rats exposed to MoO3 NPs had liver parenchymal steatosis, inflammatory changes, hemorrhagic infarctions and hyperplasia in the lungs.

CONCLUSION

MoO3 NPs have a more apparent ability to bioaccumulate and produce toxic effects in comparison with their microdispersed analogue under multiple oral introductions into the body.

Colombian Essential Oil of Ruta graveolens against Nosocomial Antifungal Resistant Candida Strains

Drug resistance in antifungal therapy, a problem unknown until a few years ago, is increasingly assuming importance especially in immunosuppressed patients and patients receiving chemotherapy and radiotherapy. In the past years, the use of essential oils as an approach to improve the effectiveness of antifungal agents and to reduce antifungal resistance levels has been proposed. Our research aimed to evaluate the antifungal activity of Colombian rue, Ruta graveolens, essential oil (REO) against clinical strains of Candida albicans, Candida parapsilopsis, Candida glabrata, and Candida tropicalis. Data obtained showed that C. tropicalis and C. albicans were the most sensitive strains showing minimum inhibitory concentrations (MIC) of 4.1 and 8.2 µg/mL of REO. Time–kill kinetics assay demonstrated that REO showed a fungicidal effect against C. tropicalis and a fungistatic effect against C. albicans. In addition, an amount of 40% of the biofilm formed by C. albicans was eradicated using 8.2 µg/mL of REO after 1 h of exposure. The synergistic effect of REO together with some antifungal compounds was also investigated. Fractional inhibitory concentration index (FICI) showed synergic effects of REO combined with amphotericin B. REO Lead a disruption in the cellular membrane integrity, consequently resulting in increased intracellular leakage of the macromolecules, thus confirming that the plasma membrane is a target of the mode of action of REO against C. albicans and C. tropicalis.

A review on metal-based nanoparticles and their toxicity to beneficial soil bacteria and fungi

The unregulated deposition of metal-based nanoparticles in terrestrial ecosystems particularly in agricultural systems has alarmingly threatened the sustainability of the environment and diversity of beneficial microbial populations such as soil bacteria and fungi. This occurs due to the poor treatment of biosolids during wastewater treatment and their application in agricultural fields to enhance the fertility of soils. Continuous deposition, low biodegradability, and longer persistence of metal nanoparticles in soils adversely impact the population of soil beneficial bacteria and fungi. The current literature suggests the toxic outcome of nanoparticle-fungi and nanoparticle-bacteria interactions based on various toxicity endpoints. Therefore, due to the extreme importance of beneficial soil bacteria and fungi for soil fertility and plant growth, this review summarizes the production, application, release of metal nanoparticles in the soil system and their impact on various soil microbes specifically plant growth-promoting rhizobacteria, cellular toxicity and impact of nanoparticles on bioactive molecule production by microbes, destructive nanoparticle impact on unicellular, mycorrhizal, and cellulose/lignin degrading fungi. This review also highlights the molecular alterations in fungi and bacteria-induced by nanoparticles and suggests a plausible toxicity mechanism. This review advances the understanding of the nano-toxicity aspect as a common outcome of nanoparticles and fungi/bacteria interactions.

Fate assessment of commercial 2D MoS2 aqueous dispersions at physicochemical and toxicological level

The physicochemical properties and the toxicological potential of commercially available MoS₂ nanoparticles with different lateral size and degradation stage were studied in the present research work. To achieve this, the structure and stoichiometry of fresh and old aqueous suspensions of micro-MoS₂ and nano-MoS₂ was analyzed by Raman, while x-ray photoelectron spectroscopy allowed to identify more quantitatively the nature of the formed oxidized species. A, the toxicological impact of the nanomaterials under analysis was studied using adenocarcinomic human alveolar basal epithelial cells (A549 cells) and the unicellular fungus S. cerevisiae as biological models. Cell viability assays and reactive oxygen species (ROS) determinations demonstrated different toxicity levels depending on the cellular model used and in function of the degradation state of the selected commercial nanoproducts. Both MoS₂ nanoparticle types induced sublethal damage on the A549 cells though the increase of intracellular ROS levels, while comparable concentrations reduced the viability of yeast cells. In addition, the old MoS₂ nanoparticles suspensions exhibited a higher toxicity for both human and yeast cells than the fresh ones. Our findings demonstrate that the fate assessment of nanomaterials is a critical aspect to increase the understanding on their characteristics and on their potential impact on biological systems along their life cycle.

Colletotrichum gloesporioides inhibition using chitosan-Ruta graveolens L essential oil coatings: Studies in vitro and in situ on Carica papaya fruit

In this study we assessed the efficacy of chitosan (CHI) (2%) emulsion added with Ruta graveolens L. essential oil (REO) at different concentrations (0.5%, 1.0% and 1.5%) to control C. gloesporioides grows both "in situ" and "in vitro" in papaya Maradol (Carica papaya L.). In vitro studies showed a decrease on fungal growth (mycelia diameter) with the increase of REO concentration, while 0.5% of REO induce a reduction of 56.42%, REO at 1.0% and 1.5% induced a reduction of 97%. Microscopic analysis showed irreversible deleterious morphological and ultrastructural alterations as well as changes in conidia morphology, and conidia germination inhibition up to 90%. Among the most abundant REO constituents, 2-Nonanol showed strong antifungal activity followed by 2-Undecanone, Benzyl acetate, 2-Nonanone, 2-Tridecanone and 2-Dodecanone. Studies "in situ" on papaya fruit during 12 days at 20 °C, showed a reduction of the C. gloesporioides lesion expansion by 50% using CHI-REO 0.5% emulsions and by 100% with treatments of CHI-REO 1.0 and 1.5%, in addition the emulsions were efficacious to reduce the fruit surface microbiota. On the other hand, physicochemical analysis of the papaya fruits demonstrated that CHI-REO emulsions treatment delayed papaya ripening without affecting the organoleptic characteristics. All these results demonstrated for the first time the application of coatings CHI-REO as a postharvest treatment for the control of anthracnose on papaya fruit.