Degradation of tri(2-chloroethyl)phosphate by a microwave enhanced heterogeneous Fenton process using iron oxide containing waste

A review of the present methods used to remediate soil and water contaminated with organophosphate esters and developmental directions

Organophosphate esters (OPEs) are widely used commercial additives, but their environmental persistence and toxicity raise serious concerns necessitating associated remediation strategies. Although there are various existing technologies for OPE removal, comprehensive screening for them is urgently needed to guide further research. This review provides a comprehensive overview of the techniques used to remove OPEs from soil and water, including their related influencing factors, removal mechanisms/degradation pathways, and practical applications. Based on an analysis of the latest literature, we concluded that (1) methods used to decontaminate OPEs include adsorption, hydrolysis, photolysis, advanced oxidation processes (AOPs), activated sludge processes, and microbial degradation; (2) factors such as the quantity/characteristics of the catalysts/additives, pH value, inorganic ion concentration, and natural organic matter (NOM) affect OPE removal; (3) primary degradation mechanisms involve oxidation induced by reactive oxygen species (ROS) (including •OH and SO4•-) and degradation pathways include hydrolysis, hydroxylation, oxidation, dechlorination, and dealkylation; (5) interference from the pH value, inorganic ion and the presence of NOM may limit complete mineralization during the treatment, impacting practical application of OPE removal techniques. This review provides guidance on existing and potential OPE removal methods, providing a theoretical basis and innovative ideas for developing more efficient and environmentally friendly techniques to treat OPEs in soil and water.

Synergistic degradation of Tris (2-Chloroethyl) Phosphate (TCEP) by US/Fenton system: Experimental, DFT calculation and toxicity evaluation

Organophosphorus esters (OPEs), exemplified by tris (2-chloroethyl) phosphate (TCEP), find extensive application in diverse industries such as construction materials, textiles, chemical manufacturing, and electronics, consequently resulting in an increased concentration of these compounds in industrial wastewater. The fundamental objective of this investigation was to examine the degradation of TCEP through the implementation of US/Fenton oxidation techniques in a solution. The findings revealed that the US/Fenton system effectively facilitated the degradation of TCEP, with the Chan kinetic model precisely elucidating the degradation process. Under optimized reaction conditions, the degradation efficiency of TCEP reached an impressive 93.18%. However, the presence of common co-existing aqueous substrates such as Cl-, HCO3-, H2PO4-, and HA hindered the degradation process. Bursting tests and electron paramagnetic resonance (EPR) studies affirmed ∙OH oxidation as the principal mechanism underlying TCEP degradation. Detailed degradation pathways for TCEP were established through the utilization of density-functional theory (DFT) calculations and GC/MS tests. Moreover, the ecotoxicological evaluation of TCEP and its intermediates was conducted using the Toxicity Estimation Software Tool (T.E.S.T.).

Occurrence and treatment effect assessment of organophosphorus flame retardants in source and drinking water, Jinan, China

The occurrence and removal efficiencies of organophosphorus flame retardants (OPFRs) by traditional treatment processes (pre-flocculation, sand filtration, and post-chlorination processes) and advanced treatment processes (i.e., ozone and granular activated carbon (GAC), ultraviolet/hydrogen peroxide (UV/H₂O₂), GAC alone, ultrafiltration membrane, nanofiltration membrane) were examined in two municipal plants and a pilot plant in Jinan, China. The concentrations of six OPFRs in raw waters were at levels of 16.8-100.0 ng/L, and three OPFRs were below the detection limits. The traditional treatment processes could not effectively remove the OPFRs (the removal efficiency was - 12.0-15.4%). The advanced oxidation with ozone and GAC (the removal efficiency was 35.6-60.3%) or UV/H₂O₂ and GAC processes (the removal efficiency was 68.0-86.7%) were more effective than the traditional water treatment processes. The removal efficiencies of ultrafiltration process for the OPFRs was 11.2-69.8% which were positively correlated with the logKow values of OPFRs. The nanofiltration membrane process with ultrafiltration membrane process as the pretreatment was the most effective process (the removal efficiencies were almost to 100%). These results imply that the combination of ultrafiltration membrane and nanofiltration membrane is an effective measure in the treatment of OPFRs in municipal drinking water plants.

A new and systematic review on the efficiency and mechanism of different techniques for OPFRs removal from aqueous environments

Organic phosphorus flame retardants (OPFRs), as a new type of emerging contaminant, have drawn great attention over the last few years, due to their wide distribution in aquatic environments and potential toxicities to humans and living beings. Various treatment methods have been reported to remove OPFRs from water or wastewater. In this review, the performances and mechanisms for OPFRs removal with different methods including adsorption, oxidation, reduction and biological techniques are overviewed and discussed. Each technique possesses its advantage and limitation, which is compared in the paper. The degradation pathways of typical OPFRs pollutants, such as Cl-OPFRs, alkyl OPFRs and aryl OPFRs, are also reviewed and compared. The degradation of those OPFRs depends heavily upon their structures and properties. Furthermore, the implications and future perspectives in such area are discussed. The review may help identify the research priorities for OPFRs remediation and understand the fate of OPFRs during the treatment processes.

Degradation mechanism of tris(2-chloroethyl) phosphate (TCEP) as an emerging contaminant in advanced oxidation processes: A DFT modelling approach

As a typical toxic organophosphate and emerging contaminant, tris(2-chloroethyl) phosphate (TCEP) is resistant to conventional water treatment processes. Studies on advanced oxidation processes (AOPs) to degrade TCEP have received increasing attention, but the detailed mechanism is not yet fully understood. This study investigated the mechanistic details of TCEP degradation promoted by OH by using the density functional theory (DFT) method. Our results demonstrated that in the initial step, energy barriers of the hydrogen abstraction pathways were no more than 7 kcal/mol. Cleavage of the P-O or C-Cl bond was possible to occur, whilst the C-O or C-C cleavage had to overcome an energy barrier above 50 kcal/mol, which was too high for mild experimental conditions. The bond dissociation energy (BDE) combined with the distortion/interaction energy (DIE) analysis disclosed origin of the various reactivities of each site of TCEP. The systematic calculations on the transformation of products generated in the initial step showed remarkable exothermic property. The novel information at molecular level provides insight on how these products are generated and offers valuable theoretical guidance to help develop more effective AOPs to degrade TCEP or other emerging environmental contaminant.

Rapid electrochemical reduction of a typical chlorinated organophosphorus flame retardant on copper foam: degradation kinetics and mechanisms

With the widespread use, chlorinated organophosphorus flame retardants (Cl-OPFRs) as a new emerging contaminant have been widely detected in water environments over the last few years. In this study, the degradation of a typical Cl-OPFR, TCEP (tris (2-chloroethyl) phosphate), by electrochemical reduction was investigated. It was found that copper (Cu) foam as the cathode showed more rapid and effective degradation for TCEP, compared to other cathodes. When TCEP was at the low concentrations (0.1 and 1 mg L^-1), its degradation by Cu foam could reach above 95% within 20 min, and the maximum rate constant was 0.127 min-1. TCEP reduction was little influenced by the co-existing humic substance and anions, except Cl^-. Compared with the reported oxidation methods, electrochemical reduction showed fast and stable degradation for TCEP. For other types of Cl-OPFRs, electrochemical reduction displayed a fast and effective removal for tris (1,3-dichloro-2-propyl) phosphate but lower removal for tris (2-cholroisopropyl) phosphate who possessed methyl units in the branched chains, influencing its reducibility. Based on the product analysis and Fukui function calculation, the bonds of TCEP molecule were found to be gradually broken, and the three oxygen-ethyl-chlorine arms were cleaved one by one. The products including C₆H₁₃Cl₂O₄P (MW = 249.99278 Da), C₄H₉Cl₂O₄P (MW = 221.96105 Da) and C₄H₁₀ClO₄P (MW = 188.0002 Da) were detected at 60 min reaction, and those intermediates showed much lower toxicities than TCEP according to the previous report. The findings may provide a promising treatment for Cl-OPFRs removal from aqueous environments and help understand their reductive fate.

Experimental Study of OH-Initiated Heterogeneous Oxidation of Organophosphate Flame Retardants: Kinetics, Mechanism, and Toxicity

The environmental risks and health impacts associated with particulate organophosphate flame retardants (OPFRs), which are ubiquitous in the global atmosphere, have not been adequately assessed due to the lack of data on the reaction kinetics, products, and toxicity associated with their atmospheric transformations. Here, the importance of such transformations for OPFRs are explored by investigating the reaction kinetics, degradation chemical mechanisms, and toxicological evolution of two OPFRs (2-ethylhexyl diphenyl phosphate (EHDP) and diphenyl phosphate (DPhP)) coated on (NH₄)₂SO₄ particles upon heterogeneous OH oxidation. The derived reaction rate constants for the heterogeneous loss of EHDP and DPhP are (1.12 ± 0.22) × 10^-12 and (2.33 ± 0.14) × 10^-12 cm³ molecules^-1 s^-1, respectively. Using recently developed real-time particle chemical composition measurements, particulate products from heterogeneous photooxidation and the associated degradation mechanisms for particulate OPFRs are reported for the first time. Subsequent cytotoxicity analysis of the unreacted and oxidized OPFR particles indicated that the overall particle cytotoxicity was reduced by up to 94% with heterogeneous photooxidation, likely due to a significantly lower cytotoxicity associated with the oxidized OPFR products relative to the parent OPFRs. The present work not only provides guidance for future field sampling for the detection of transformation products of OPFRs, but also strongly supports the ongoing risk assessment of these emerging chemicals and most critically, their products.

Parameters affecting LED photoreactor efficiency in a heterogeneous photo-Fenton process using iron mining residue as catalyst

In this article, a light-emitting diode (LED)-based photoreactor was designed and evaluated for degradation of the antibiotic sulfathiazole (STZ), using heterogeneous photo-Fenton process with an iron ore residue as catalyst. The effects of the type of magnetic stirrer bar, use of baffles, rotation speed, and type and intensity of irradiation source were evaluated. The results showed that the degradation of STZ was strongly influenced by rotation speed (1100 rpm) and that the use of an octagonal stirrer bar favoured high dispersion and greater contact of the catalyst with the reaction medium. Although the presence of baffles had little influence on STZ degradation, their use enabled good dispersion of the catalyst (due to axial flow) and eliminated the vortex formed at high stirring speeds. It was found that the iron mining residue could be activated by UV LEDs, visible light LEDs, and black light irradiation, with similar degradation efficiencies achieved. Using the LEDs, STZ concentrations below the detection limit were obtained after 40 min, with power consumption 38-fold (UV LEDs) and 22-fold (visible light LEDs) lower than required for black light irradiation. The results demonstrated the advantages of the use of LED devices as irradiation systems in heterogeneous photo-Fenton processes.