Superhydrophobic coatings on gelatin-based films: fabrication, characterization and cytotoxicity studies

Antimicrobial topical polymeric films loaded with Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid and silver nanoparticles: Optimization, characterization, and biological activity

The study examined the antimicrobial and antioxidant potential of pure Acetyl-11-keto-β-boswellic acid (AKBA), boswellic acid (70%) and AKBA loaded nanoparticles as topical polymeric films. The optimized concentration (0.05 % w/v) of pure AKBA, boswellic acid (BA), and AKBA loaded silver nanoparticles were used to study its impact on film characteristics. Carboxymethyl cellulose (CMC), sodium alginate (SA), and gelatin (Ge) composite films were prepared in this study. The polymeric films were evaluated for their biological (antioxidant and antimicrobial activities) and mechanical characteristics such as tensile strength (TS) and elongation (%). Moreover, other parameters including water barrier properties and color attributes of the film were also evaluated. Furthermore, assessments were conducted using analytical techniques like FTIR, XRD, and SEM. Surface analysis revealed that AgNP precipitation led to a few particles in the film structure. Overall, the results indicate a relatively consistent microstructure. Moreover, due to the addition of AKBA, BA, and AgNPs, a significant decrease in TS, moisture content, water solubility, and water vapor permeation was observed. The films transparency also showed a decreasing trend, and the color analysis revealed decreasing yellowness (b*) of the films. Importantly, a significant increase in antioxidant activity against DPPH free radicals and ABTS cations was observed in the CSG films. Additionally, the AgNP-AKBA loaded films displayed significant antifungal activity against C. albicans. Moreover, the molecular docking analysis revealed the inter-molecular interactions between the AKBA, AgNPs, and composite films. The docking results indicate good binding of AKBA and silver nanoparticles with gelatin and carboxymethyl cellulosemolecules. In conclusion, these polymeric films have potential as novel materials with significant antioxidant and antifungal activities.

Gelatin-Coated TiO2/Pd Hybrid: A Potentially Useful Nanomaterial to Enhance Antibacterial and Anticancer Properties

Hybrid nanomaterials have attracted considerable interest in biomedicine because of their fascinating characteristics and wide range of applications in targeted drug delivery, antibacterial activity, and cancer treatment. This study developed a gelatin-coated Titanium oxide/palladium (TiO2/Pd) hybrid nanomaterial to enhance the antibacterial and anticancer capabilities. Morphological and structural analyses were conducted to characterize the synthesized hybrid nanomaterial. The surface texture of the hybrid nanomaterials was examined by high-resolution transmission electron microscopy (HR-TEM) and field-emission scanning electron microscopy (FE-SEM). The FE-SEM image revealed the bulk of the spherically shaped particles and the aggregated tiny granules. Energy dispersive X-ray spectroscopy (EDS) revealed Ti, Pd, C, and O. X-ray diffraction (XRD) revealed the gelatin-coated TiO2/Pd to be in the anatase form. Fourier transform infrared spectroscopy examined the interactions among the gelatin-coated TiO2/Pd nanoparticles. The gelatin-coated TiO2/Pd nanomaterials exhibited high antibacterial activity against Escherichia coli (22 mm) and Bacillus subtilis (17 mm) compared to individual nanoparticles, confirming the synergistic effect. More importantly, the gelatin-coated TiO2/Pd hybrid nanomaterial exhibited remarkable cytotoxic effects on A549 lung cancer cells which shows a linear increase with the concentration of the nanomaterial. The hybrid nanomaterials displayed higher toxicity to cancer cells than the nanoparticles alone. Furthermore, the cytotoxic activity against human cancer cells was verified by the generation of reactive oxygen species and nuclear damage. Therefore, gelatin-coated TiO2/Pd nanomaterials have potential uses in treating cancer and bacterial infections.

Enhancement of Bone Tissue Regeneration with Multi-Functional Nanoparticles by Coordination of Immune, Osteogenic, and Angiogenic Responses

Inorganic nanoparticles are promising materials for bone tissue engineering due to their chemical resemblance to the native bone structure. However, most studies are unable to capture the entirety of the defective environment, providing limited bone regenerative abilities. Hence, this study aims to develop a multifunctional nanoparticle to collectively control the defective bone niche, including immune, angiogenic, and osteogenic systems. The nanoparticles, self-assembled by biomimetic mineralization and tannic acid (TA)-mediated metal-polyphenol network (MPN), are released sustainably after the incorporation within a gelatin cryogel. The released nanoparticles display a reduction in M1 macrophages by means of reactive oxygen species (ROS) elimination. Consequently, osteoclast maturation is also reduced, which is observed by the minimal formation of multinucleated cells (0.4%). Furthermore, the proportion of M2 macrophages, osteogenic differentiation, and angiogenic potential are consistently increased by the effects of magnesium from the nanoparticles. This orchestrated control of multiple systems influences the in vivo vascularized bone regeneration in which 80% of the critical-sized bone defect is regenerated with new bones with mature lamellar structure and arteriole-scale micro-vessels. Altogether, this study emphasizes the importance of the coordinated modulation of immune, osteogenic, and angiogenic systems at the bone defect site for robust bone regeneration.

Multistage Modulation Formation of Hydrophilic-Hydrophobic Boron Carbon Nitride Nanomaterials

Boron carbon nitride (BCN) ternary compounds are attractive due to their wide applications in adsorption, catalysis, protective coatings, etc. A simple way is provided to synthesize BCN materials with multistage modulation of hydrophilic-hydrophobic properties. Hydrophilic BCN nanoparticles with a contact angle of 31° and nearly superhydrophobic BCN sheets with a contact angle of 145° are obtained. The participation of a CuO additive in the synthesis process has the role of tuning morphologies, components, and properties of BCN materials. The addition of CuO would improve the hydrophobicity of BCN due to its microstructure with enhanced surface roughness. The interaction between melamine and boric acid on the surface of CuO(111) is investigated by first-principles calculations based on density functional theory (DFT). The tuned BCN materials have different photoelectric properties also, and their performance as photocatalysts has been verified in photocatalytic reactions for hydrogen from water. The achieved uniform hydrophilic BCN nanoparticles and hydrophobic BCN sheets have the potential for further practical applications.

Cellulose nanofibrils reinforced chitosan-gelatin based hydrogel loaded with nanoemulsion of oregano essential oil for diabetic wound healing assisted by low level laser therapy

Diabetic foot ulcers are imperfections in the process of wound healing due to hyperglycemic conditions. Here, a nanoemulgel fabricated with oregano essential oil nanoemulsion, assisted by low-level laser therapy, was investigated for its efficacy in diabetic wound healing. A hydrogel- based healing patch, fabricated using biological polymers namely chitosan and gelatin and, polyvinyl pyrollidone. The hydrogel was reinforced with cellulose nanofibrils for enhanced stability and barrier properties. Nanoemulsion of oregano essential oil, with an average particle size of 293.7 ± 8.3 nm, was prepared via homogenization with chitosan as the coating agent. Nanoemulsion impregnated hydrogel, termed as the nanoemulgel, was assessed for its physio-mechanical properties and healing efficiency. The strong linkages in nanoemulgel demonstrated its large swelling capacity, high mechanical strength, and maximum thermal stability. The optimized conditions for low-level laser therapy using 808 nm were 1 W. cm^-2 and 5 min. The optimized drug concentration of 128 μg. mL^-1 exhibited viability of NIH/3 T3 fibroblasts as 75.5 ± 1.2 % after 24 h. Cell migration assay demonstrated that dual therapy facilitated wound healing, with a maximum closure rate of 100 % at 48 h. In vivo results revealed the rapid healing effects of the dual therapy in diabetic rat models with foot ulcers: a maximum healing rate of 97.5 %, minimum scar formation, increased granulation, enhanced reepithelialization, and a drastic decrease in inflammation and neutrophil infiltration within the treatment period compared to monotherapy and control. In summary, the combinatorial therapy of nanoemulgel and low-level laser therapy is a promising regimen for managing diabetic foot ulcers with a rapid healing effect.

Novel Active Food Packaging Films Based on Gelatin-Sodium Alginate Containing Beetroot Peel Extract

Currently, the exploration of natural colorants from vegetal waste has gained particular attention. Furthermore, incorporation of these natural sources into biopolymers is an encouraging environmentally friendly approach to establishing active films with biological activities for food packaging. The present study developed bioactive antioxidant films based on gelatin-sodium alginate (NaAlg) incorporated with aqueous beetroot peel extract (BPE). Firstly, the effects of combining gelatin-NaAlg and BPE at 0.25, 0.5, and 1% on the mechanical, physical, antioxidant, and antibacterial properties of the films were analyzed. With increasing BPE, mechanico-physical properties and antioxidant and anti-foodborne pathogen capacities were enhanced. Likewise, when added to gelatin-NaAlg films, BPE remarkably increased the instrumental color properties. Moreover, during 14 days of storage at 4 °C, the impact of gelatin-NaAlg coating impregnated with BPE on microbial and chemical oxidation and on the sensory characteristics of beef meat samples was periodically assessed. Interestingly, by the end of the storage, BPE at 1% limited the microbial deterioration, enhanced the instrumental color, delayed chemical oxidation, and improved sensory traits. By practicing chemometrics tools (principal component analysis and heat maps), all data provided valuable information for categorizing all samples regarding microbiological and oxidative properties, sensory features, and instrumental color. Our findings revealed the ability of gelatin-NaAlg with BPE as an antioxidant to be employed as food packaging for meat preservation.

Assessing the compressive elasticity and multi-responsive property of gelatin-containing weakly anionic copolymer gels via semi-IPN strategy

A series of semi-interpenetrating polymer network (semi-IPN) hydrogels based on acrylamide (AAm) and itaconic acid (ITA) was prepared in the presence of different amounts of the natural polymer gelatin (GLN). The semi-IPNs were synthesized by simultaneous polymerization using N,N'-methylene bisacrylamide as a crosslinking agent. A pH-sensitive system was obtained by adding 2 mol% ITA as an anionic comonomer. The effect of GLN content by changing the amine/carboxyl functional groups and incorporating carboxyl groups of ITA in semi-IPN on the swelling, elasticity and physical properties of the hydrogels was investigated. The presence of GLN improved the thermal stability, and the GLN-containing semi-IPNs exhibited a higher degradation temperature compared to the GLN-free copolymers. The addition of a small amount of GLN could effectively increase the swelling of the semi-IPNs in water. By employing the GLN-containing semi-IPN as a model system, the solvent/matrix interactions were demonstrated to reveal the effect of solvent structure on the swelling-shrinkage response. The addition of GLN improved the pH-sensitivity of the semi-IPN gels, resulting in a clear response to pH change by action of NH₃⁺ and COOH of GLN and additional COOH groups from ITA. The mechanical performance of the copolymer network was improved by entangling PAAm/ITA chains with GLN, which acted as a reinforcement node. In terms of the effect of Hofmeister anions on the swelling behavior, the anion effect became more pronounced with salt concentration. The affinity of semi-IPNs towards the cationic dyes methylene blue and malachite green was tested and the dependence of the adsorption process on the initial dye concentration, contact time and GLN content was determined. This method presents a simple and efficient approach for the design of chemically crosslinked protein-based gels for drug delivery applications.

Passive limitation of surface contamination by perFluoroDecylTrichloroSilane coatings in the ISS during the MATISS experiments

Future long-duration human spaceflight will require developments to limit biocontamination of surface habitats. The MATISS (Microbial Aerosol Tethering on Innovative Surfaces in the international Space Station) experiments allowed for exposing surface treatments in the ISS (International Space Station) using a sample-holder developed to this end. Three campaigns of FDTS (perFluoroDecylTrichloroSilane) surface exposures were performed over monthly durations during distinct periods. Tile scanning optical microscopy (×3 and ×30 magnifications) showed a relatively clean environment with a few particles on the surface (0.8 to 7 particles per mm²). The varied densities and shapes in the coarse area fraction (50-1500 µm²) indicated different sources of contamination in the long term, while the bacteriomorph shapes of the fine area fraction (0.5-15 µm²) were consistent with microbial contamination. The surface contamination rates correlate to astronauts' occupancy rates on board. Asymmetric particles density profiles formed throughout time along the air-flow. The higher density values were located near the flow entry for the coarse particles, while the opposite was the case for the fine particles, probably indicating the hydrophobic interaction of particles with the FDTS surface.

Antimicrobial packaging film from cactus (Cylindropuntia fulgida) mucilage and gelatine

Gelatine is an excellent substitute for biodegradable packaging materials; nevertheless, it is necessary to mix it with other polymers due to its poor mechanical and high hydrophilicity. In the present study, we used Cylindropuntia fulgida mucilage (CF) as main constituent and gelatine (GTN). The Euphorbia caducifolia extract (ECE) was incorporated in concentrations of 0, 1, 5, 10, 20 %, and its influence on the film's morphological, thermal, mechanical, and water vapor barrier properties was assessed. The surface of fabricated CF/GTN/ECE biocomposite films was more homogeneous and smoother with the high concentration of in ECE. The elongation at break improved from 2 to 60.59 %, and WVP enhanced from 3.34 to 2.59 10^-4 g mm/mm² day kPa and highest antimicrobial activity of 3.62 ± 0.71 Log CFU g^-1 when CF/GTN was incorporated with 20 % ECE. Incorporating CF and ECE 10 to 20 % makes these films a good substitute for the packaging of food products.

Inhalable Mannosylated Rifampicin–Curcumin Co-Loaded Nanomicelles with Enhanced In Vitro Antimicrobial Efficacy for an Optimized Pulmonary Tuberculosis Therapy

Among respiratory infections, tuberculosis was the second deadliest infectious disease in 2020 behind COVID-19. Inhalable nanocarriers offer the possibility of actively targeting anti-tuberculosis drugs to the lungs, especially to alveolar macrophages (cellular reservoirs of the Mycobacterium tuberculosis). Our strategy was based on the development of a mannose-decorated micellar nanoformulation based in Soluplus^® to co-encapsulate rifampicin and curcumin. The former is one of the most effective anti-tuberculosis first-line drugs, while curcumin has demonstrated potential anti-mycobacterial properties. Mannose-coated rifampicin (10 mg/mL)–curcumin (5 mg/mL)-loaded polymeric micelles (10% w/v) demonstrated excellent colloidal properties with micellar size ~108 ± 1 nm after freeze-drying, and they remain stable under dilution in simulated interstitial lung fluid. Drug-loaded polymeric micelles were suitable for drug delivery to the deep lung with lung accumulation, according to the in vitro nebulization studies and the in vivo biodistribution assays of radiolabeled (99mTc) polymeric micelles, respectively. Hence, the nanoformulation did not exhibit hemolytic potential. Interestingly, the addition of mannose significantly improved (5.2-fold) the microbicidal efficacy against Mycobacterium tuberculosis H37Rv of the drug-co-loaded systems in comparison with their counterpart mannose-free polymeric micelles. Thus, this novel inhaled nanoformulation has demonstrated its potential for active drug delivery in pulmonary tuberculosis therapy.

Building bimodal structures by a wettability difference-driven strategy for high-performance protein air-filters

Building bimodal structures for air-filters is promising to reduce the airflow resistance without sacrificing the filtration efficiency. To do so, multi-jet electrospinning is among the most broadly used methods, yet the interplay between single fibers in electrospinning, which is significant to their morphologies, is overlooked. In this study, we report a wettability difference-driven strategy to fabricate a bimodal protein fabric with superior filtration performance. We surprisingly find that only by co-spinning of two proteins, zein and gelatin, with different wettability between them, a drastic change of fiber diameters is spontaneously achieved. The generated protein-blend fabric possesses bimodally distributed diameters of 270 nm for gelatin fibers and of 1.12 µm for zein fibers; both pure protein fabrics via single-jet electrospinning have diameters unimodally distributed in the range of 500-700 nm. The bimodal protein-blend fabric delivers exceptional removal efficiencies of 99.67% for PM_2.5 and 98.80% for PM_0.3, yielding an ultra-low airflow resistance of 38 Pa. The PM_2.5 removal efficiency retains to be 96.04% after filtering 1000 L polluted air, indicating a good long-term performance. This study brings about a new insight into fabrication of bimodal structures using multi-jet electrospinning method and promotes the development of natural products for broad applications.

Additive Fabrication and Characterization of Biomimetic Composite Bone Scaffolds with High Hydroxyapatite Content

With the increased incidence of bone defects following trauma or diseases in recent years, three-dimensional porous scaffolds fabricated using bioprinting technologies have been widely explored as effective alternatives to conventional bone grafts, which provide cell-friendly microenvironments promoting bone repair and regeneration. However, the limited use of biomaterials poses a significant challenge to the robust and accurate fabrication of bioprinted bone scaffolds that enable effective regeneration of the target tissues. Although bioceramic/polymer composites can provide tunable biomimetic conditions, their effects on the bioprinting process are unclear. Thus, in this study, we fabricated hydroxyapatite (HA)/gelatin composite scaffolds containing large weight fractions of HA using extrusion-based bioprinting, with the aim to provide an adequate biomimetic environment for bone tissue regeneration with compositional and mechanical similarity to the natural bone matrix. The overall features of the bioprinted HA/gelatin composite scaffolds, including rheological, morphological, physicochemical, mechanical, and biological properties, were quantitatively assessed to determine the optimal conditions for both fabrication and therapeutic efficiency. The present results show that the bioprinted bioceramic/hydrogel scaffolds possess excellent shape fidelity; mechanical strength comparable to that of native bone; and enhanced bioactivity in terms of cell proliferation, attachment, and osteogenic differentiation. This study provides a suitable alternative direction for the fabrication of bioceramic/hydrogel-based scaffolds for bone repair based on bioprinting.

Fabrication of dual layered biocompatible herbal biopatch from biological waste for skin - tissue regenerative applications

A dual layered herbal biopolymeric patch (biopatch) with enhanced wound healing efficiency and skin mimicking functions was fabricated for skin-tissue regenerative applications. In this study, hoof keratin (KE) extracted from biological waste and gelatin (GE) was employed for KE-GE biosheet fabrication using a simple casting method. Further, the top layer of the fabricated KE-GE biosheet was coated with bioactive Matricaria recutita (Chamomile flower) extract (CH) with gelatin through an electrospraying method. The optimized dual layered herbal biopatch (KE-GE/GE-CH) exhibits strong physiochemical (FTIR, XRD TG-DTA), mechanical (tensile strength) and biological (in vitro and in vivo) studies. Moreover, the morphology (SEM) of soft mimetic biopatch possesses excellent cell-material interaction and cell proliferation which accelerates the wound healing process. Biopatch demonstrates a proven degradation profile with good swelling features to achieve more than 80% herbal drug release in 96 h. Antimicrobial properties also reveal the potential activity of biopatch against bacterial microbes. In addition, in vitro cell viability using NIH 3T3 fibroblast cell lines and in vivo investigations revealed that the biopatch is non-cytotoxic, increases collagen deposition and shows rapid reepithelialization at the wound site as a potential wound dressing. We anticipated that the biological hoof keratin and bioactive herbal extract coated biopatch could serve as a desirable wound dressing candidate to suit various skin tissue regenerative applications.

Multifunction gelatin/chitosan composite microspheres with ROS-scavenging and antibacterial activities for improving the microenvironment of chronic wounds

Multifunction gelatin/chitosan composite microspheres with ROS-scavenging and antibacterial activities for chronic wound healing.

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-milling, Anodic Oxidation and Fluorination

The superhydrophobic surface has a great advantage of self-cleaning, inhibiting bacterial adhesion, and enhancing anticoagulant properties in the field of biomedical materials. In this paper, a superhydrophobic surface was successfully prepared on titanium alloy via high-speed micro-milling, anodic oxidation and fluoroalkylsilane modification. The surface morphology was investigated by scanning electron microscope and a laser scanning microscope. The surface wettability was investigated through the sessile-drop method. Firstly, regular microgrooves were constructed by micro-milling. Then, nanotube arrays were fabricated by anodic oxidation. Afterwards, fluoroalkylsilane was used to self-assemble a monolayer on the surface with a composite micro/nanostructure. Compared to polished titanium samples, the modified samples exhibited superhydrophobic properties with the water contact angle (CA) of 153.7° and the contact angle hysteresis of 2.1°. The proposed method will provide a new idea for the construction of superhydrophobic titanium surgical instruments and implants in the future.

Electrospun Gelatin Fibers Surface Loaded ZnO Particles as a Potential Biodegradable Antibacterial Wound Dressing

Traditional wound dressings require frequent replacement, are prone to bacterial growth and cause a lot of environmental pollution. Therefore, biodegradable and antibacterial dressings are eagerly desired. In this paper, gelatin/ZnO fibers were first prepared by side-by-side electrospinning for potential wound dressing materials. The morphology, composition, cytotoxicity and antibacterial activity were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (DLS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetry (TGA) and Incucyte™ Zoom system. The results show that ZnO particles are uniformly dispersed on the surface of gelatin fibers and have no cytotoxicity. In addition, the gelatin/ZnO fibers exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with a significant reduction of bacteria to more than 90%. Therefore, such a biodegradable, nontoxic and antibacterial fiber has excellent application prospects in wound dressing.

Superhydrophobicity: advanced biological and biomedical applications

The biological and biomedical applications of superhydrophobic surface.

Environmentally Friendly Gelatin/β-Cyclodextrin Composite Fiber Adsorbents for the Efficient Removal of Dyes from Wastewater

In this paper, environmentally friendly gelatin/β-cyclodextrin (β-CD) composite fiber adsorbents prepared by electrospinning were used for the removal of dyes from wastewater. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and a universal materials tester were employed to characterize the internal structures, surface morphologies and mechanical strength of the composite fiber adsorbents. Additionally, the fiber was evaluated as an adsorbent for the removal of methylene blue (MB) from aqueous solution. The effects of the raw material ratio, pH, temperature, concentration and adsorption time were studied. The results show that the gelatin/β-CD composite fiber adsorbents possess excellent mechanical strength and high adsorption efficiency for MB. The adsorption equilibrium and adsorption kinetics are well-described by the Langmuir isotherm model and the pseudo-second-order kinetic model, respectively. The theoretical maximum adsorption capacity is 47.4 mg·g-1. Additionally, after nine successive desorption-adsorption cycles, the removal rate is still over 70%. Moreover, the gelatin/β-CD composite fiber adsorbents exhibit excellent adsorption capability for basic fuchsin, gentian violet, brilliant blue R and malachite green dyes. Therefore, owing to the characteristics of degradability, low cost and high-efficiency, the gelatin/β-CD composite fiber can be used as an efficient adsorbent for the removal of dyes from wastewater.