Enhanced phosphate sequestration by Fe(iii) modified biochar derived from coconut shell

Novel Fe/Ca oxide co-embedded coconut shell biochar for phosphorus recovery from agricultural return flows

Efficient elimination and recovery of phosphorus from agricultural return flows are crucial for effective eutrophication management and phosphorus reuse. In this study, a neutral Fe/Ca oxide co-embedded biochar (FCBC) was synthesized using calcium peroxide and ferrous chloride as precursors for phosphate recovery from agricultural return flows. FCBC possesses a highly intricate pore structure and an abundance of surface-active groups. Fe/Ca oxides were loaded onto the biochar in the form of Ca2Fe2O5, Fe2O3, and CaCO3. FCBC demonstrated a broad pH tolerance range (pH = 6-12) in the aquatic environment. The maximum saturation adsorption capacity was 53.31 mg g-1. Phosphorus removal is influenced by Ca3(PO4)2 generation, intra-particle diffusion, and electrostatic attraction. The produced FCBC showed exceptional phosphorus removal efficiency in the presence of various anions, except for wastewater with high concentrations of SO4 2-, CO3 2-, HCO3 -, and F- (>500 mg L-1). FCBC can effectively remove phosphorus from agricultural return flows and reduce the risk of the water environment. Returning it to the field can also mitigate the depletion of phosphorus resources, effectively reduce carbon emissions from farmland, improve soil fertility, and realize multiple benefits.

Phosphorus recovery from ultrafiltered membrane wastewater by biochar adsorption columns: The effect of loading rates

The present study used bench scale columns filled with biochar for phosphorous (P) recovery from real ultrafiltered wastewater. No studies are available about the potentiality of biochar using ultrafiltered real wastewater. Therefore, this study aimed to assess phosphate (PO4 3-) recovery by biochar-packed columns employing real treated wastewater from an ultrafiltration process. Three flow rates were tested, specifically 0.7, 1.7 and 2.3 L h-1, to gain insights into the optimal working conditions. Results revealed that the maximum amount of PO4 3- recovery (namely, 3.43 mg g-1 biochar) can be achieved after 7 h by employing the highest tested flow rate. Furthermore, the phosphorus exchange capacity (PEC) was inversely correlated with the feeding flow rate (FFR), with PEC values equal to 35, 25 and 9 % for FFR of 0.67, 1.7 and 2.3 L h-1, respectively. The pseudo-first order model best approximated the adsorption kinetics, thus suggesting that the adsorption of phosphate by biochar depends on its concentrations (i.e. physiosorption mechanism).

Adsorption of phosphate onto agricultural waste biochars with ferrite/manganese modified-ball-milled treatment and its reuse in saline soil

Agricultural waste biochar was widely used to absorb phosphorus (P) from eutrophicated water and soil remediation. However, the research on the reuse of the sorbed P on biochar in infertile saline soil is insufficient. Biochars derived from four kinds of agricultural wastes (cotton straws from two origins, maize stalk, and rice husk) were modified and applied to adsorb phosphate in waste water and then be reused in saline soil in this study. The co-modified method combining ball milling and metal coated treatment obtained the higher specific surface area (SSA) of ferrite/manganese modified-ball-milled biochars (Fe/Mn-BMBCs) (226.5-331.5 m2 g-1) than that of pristine biochars (14.02-30.35 m2 g-1) and ferrite/manganese modified biochar (Fe/Mn-BC) (223.7 m2 g-1), which could improve the pore structure of metal modified biochar. The phosphate adsorption capacity (qmax) of Fe/Mn-BMBCs with rich functional groups and high SSA were 44.0-53.8 mg g-1, which was 4.47-5.82 times higher than that of pristine biochars. Fe/Mn-BMBCs showed efficiently adsorption performance at low pH and high temperature. The application of BC to saline soil could promote the availability of P in saline soil. P-loaded biochars could afford P as a nutrient to promote the growth of lettuce (Lactuca sativa L.) in saline soil. The lettuce fresh weight in Fe/Mn-BMBC-P2 treated soil was 8.21 times higher than that grew in control check (CK) treatment. As a P element provider, P-loaded biochars not only improve saline soil fertility and crop productivity, but also convert the agricultural wastes and P in eutrophicated waters to the sustainable resource.

Promotion of phosphate release from humic acid-iron hydroxide coprecipitates in the presence of citric acid

Phosphate (P) resources are expected to be depleted within a century. Therefore, promoting balanced phosphorus fertilizer use and understanding phosphorus dynamics in soils containing iron (III), organic acids, and iron (III)-organic molecule particulates is crucial. This study investigated the sorption of citric acid onto humic acid-iron hydr(o)xide coprecipitate (HAFHCP) and the reciprocal effects of citric acid and P sorption on HAFHCP with different C/Fe ratios. The results showed that the maximum sorption capacity (MSC) of citric acid on HAFHCP decreased with increasing C/Fe ratios in the HAFHCP. The P sorption on HAFHCP pre-sorbed with citric acids (denoted as C-P) decreased by 50% compared with that of the MSC on FH. However, citric acids could only reduce P sorption by 20% when P was pre-sorbed on HAFHCP (denoted as P-C). The results suggested that upon the formation of HAFHCP, citric acids might increase P availability, especially in the C-P system. Although citric acids initially inhibited P sorption on HAFHCP in the P-C system, P sorption increased with prolonged reaction time. The exposures of new sorption sites upon dissolution of Fe from HAFHCP by citric acids or/and the formations of Fe bridge between P and organic domains of HAFHCP might contribute to these results. Additionally, a number of large HAFHCP aggregates became smaller while sorbing P due to the increasing electric repulsion on the surfaces of FH, enabling the subsequent dissolutions of more Fe by citric acids from HAFHCP in the P-C system. By integrating these innovative and sustainable strategies, the recycling and reuse of P can be optimized, thereby minimizing the reliance on synthetic fertilizers and mitigating environmental impacts. This approach fosters the efficient utilization of phosphorus resources, improves soil fertility, and enhances the overall resilience of agricultural systems and ecosystems.

Fe-modified fly ash/cotton stalk biochar composites for efficient removal of phosphate in water: mechanisms and green-reuse potential

Excessive phosphate content input into natural water can lead to the waste of resource and eutrophication. Biochar is a kind of low-cost adsorbent. However, its adsorption capacity for phosphate is low. In order to solve this problem, Fe compound-modified fly ash/cotton stalk biochar composites (Fe-FBC) were prepared through co-pyrolyzed fly ash and cotton stalk at 800℃, followed by infiltration of FeSO₄ solution. The samples were characterized by scanning electron microscopy, Brunauer-Emmett-Teller, X-ray diffraction, Fourier transform infrared spectroscopy, and zeta potential. After modification, the hydrophilicity and polarity of Fe-FBC increased. In addition, the pore volume, specific surface area, and surface functional groups were significantly improved. The adsorption behavior of Fe-FBC for the removal of phosphate from water can be well fitted by the pseudo-second-order kinetic and Sips isotherm adsorption model, with a maximum adsorption capacity of 47.91 mg/g. Fe-FBC maintained a high adsorption capacity in the pH range of 3-10. The coexisting anions (NO₃^-, SO₄^2-, and Cl^-) had negligible effects on phosphate adsorption. The adsorption mechanisms of Fe-FBC include electrostatic attraction, ligand exchange, surface complexation, ion exchange, chemical precipitation, and hydrogen bonding. Moreover, the desorption process of phosphate was investigated, indicating that the phosphate-saturated Fe-FBC could use as slow-release phosphate fertilizer. This study proposed a potentially environmental protection and recycling economy approach, which consists of recycling resources and treating wastes with wastes.

Nickel/Biochar from Palm Leaves Waste as Selective Catalyst for Producing Green Diesel by Hydrodeoxygenation of Vegetable Oil

The objective of this research was to prepare low-cost catalyst for green diesel conversion from vegetable oil. The catalyst of nickel-dispersed biochar (Ni/BC) was prepared by direct pyrolysis of nickel precursor with palm leaves waste under N2 stream at 500 °C. The obtained catalyst was examined by using x-ray diffraction, scanning electron microscope-energy dispersive x-ray, transmission electron microscopy, gas sorption analysis, FTIR and surface acidity examination. The catalytic activity testing was performed on rice bran oil hydrodeoxygenation at varied temperature and time of reaction. Based on analyses, the results showed the successful preparation of Ni/BC with the characteristic of single nickel nanoparticles decorated on surface. The increasing specific surface area of material was conclusively remarked the surface area enhancement by nickel dispersion along with the increased surface acidity, suggesting that the material can be applied for acid catalysis applications. The Ni/BC exhibited excellent catalytic conversion of rice bran oil with the high selectivity toward diesel fraction with 85.3% yield and 92.6% selectivity. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

The Study of Optimal Adsorption Conditions of Phosphate on Fe-Modified Biochar by Response Surface Methodology

A batch of Fe-modified biochars MS (for soybean straw), MR (for rape straw), and MP (for peanut shell) were prepared by impregnating biochars pyrolyzed from three different raw biomass materials, i.e., peanut shell, soybean straw, and rape straw, with FeCl₃ solution in different Fe/C impregnation ratios (0, 0.112, 0.224, 0.448, 0.560, 0.672, and 0.896) in this research. Their characteristics (pH, porosities, surface morphologies, crystal structures, and interfacial chemical behaviors) and phosphate adsorption capacities and mechanisms were evaluated. The optimization of their phosphate removal efficiency (Y%) was analyzed using the response surface method. Our results indicated that MR, MP, and MS showed their best phosphate adsorption capacity at Fe/C ratios of 0.672, 0.672, and 0.560, respectively. Rapid phosphate removal was observed within the first few minutes and the equilibrium was attained by 12 h in all treatment. The optimal conditions for phosphorus removal were pH = 7.0, initial phosphate concentration = 132.64 mg L^-1, and ambient temperature = 25 °C, where the Y% values were 97.76, 90.23, and 86.23% of MS, MP, and MR, respectively. Among the three biochars, the maximum phosphate removal efficiency determined was 97.80%. The phosphate adsorption process of three modified biochars followed a pseudo-second-order adsorption kinetic model, indicating monolayer adsorption based on electrostatic adsorption or ion exchange. Thus, this study clarified the mechanism of phosphate adsorption by three Fe-modified biochar composites, which present as low-cost soil conditioners for rapid and sustainable phosphate removal.

The effectiveness and adsorption mechanism of iron-carbon nanotube composites for removing phosphate from aqueous environments

This study successfully employed iron-carbon nanotubes (Fe-CNT) to recover phosphate (P) from water. We examined the effects of various iron concentrations denoted by Fe-CNT-1 and Fe-CNT-2 on P removal and compared them with pristine carbon nanotubes (CNTs). The adsorption capacity of Fe-CNTs was much better than pristine CNTs. According to the high adsorption capacity, Fe-CNT-2 sample was very effective for P recovery and exhibits ∼7 times higher P removal efficiency than that of pristine CNTs. The characterization of the as-obtained adsorbent (Fe-CNT-2) and pristine CNTs were performed using X-ray diffraction, Brunauer-Emmett-Teller method, Field emission scanning electron microscope coupled with energy-dispersive spectroscopy detector (FESEM-EDS), X-ray photoelectron spectroscopy and Transmission electron microscopy. Results demonstrated that iron oxide nanoparticles were successfully deposited on the surface of CNT. The adsorption kinetics and isotherm studies for P removal showed pseudo-second-order rate constants (R² > 0.99) and the Langmuir isotherm (R² > 0.99) respectively, thus revealing that the nature of adsorption was chemisorption. The estimated Langmuir adsorption capacity of Fe-CNT-2 was 36.5 mgP/g or 112 mg PO₄/g at an equilibrium time of 3 h. The ionic strength provided by SO₄^2-, NO₃^-, and Cl^- demonstrated no considerable influence on phosphate adsorption. Moreover, the P adsorbed Fe-CNT-2 was efficiently recovered with different concentrations of desorbing reagents, such as NaOH and NaCO₃^2-. Moreover, the findings of X-ray photoelectron spectroscopy (XPS) analysis demonstrated that OH group played a major role in the P removal by Fe-CNT-2. The findings of this study demonstrate that Fe-CNT-2 had a great deal of application as an effective and stable adsorbent for the P recovery from aquatic environments.

An in situ grown amorphous ZrO2 layer on zeolite for enhanced phosphate adsorption

Zeolite supported amorphous metal oxide nanolayers with high specific surface area, abundant adsorption sites, and excellent reusability hold a bright prospect in the efficient removal of contaminants, yet it is proven to be still challenging to precisely regulate and control their synthesis. Herein, we reported a facile synthetic strategy for rational design and achieving the uniform and firm in situ growth of an amorphous ZrO2 layer decorated on the surface of zeolite (ZEO@AZ) for enhanced phosphate adsorption. The Langmuir isotherm model and pseudo-second order kinetic equation well described the adsorption process towards phosphate solution, and the synthetized ZEO@AZ exhibited an excellent maximum adsorption amount of 24.98 mgP g-1. Furthermore, the adsorption of phosphates on ZEO@AZ was confirmed to be chemisorption, endothermic and spontaneous. This approach for fabricating amorphous metal oxide nanolayers on a robust matrix may provide a new route for constructing composites with superb phosphate adsorption performance.

Mitigating the Health Effects of Aqueous Cr(VI) with Iron-Modified Biochar

A large amount of chromium (Cr) has entered the natural environment from the wastewater and waste residues, and the hexavalent (Cr(VI)) is highly poisonous, threatening the ecological environment and human health directly. In this study, iron-modified biochar was prepared using honeysuckle residue as raw material and the ferric chloride impregnation method. Batch Cr(VI) adsorption experiments were carried out using the modified honeysuckle-derived biochar (MHDB) as an adsorbent. The results indicate that a pH of 2 was best for the adsorption removal of Cr(VI) in the initial pH range of 2-10. The adsorption kinetic data fitted the pseudo-second-order model best out of the two models, and the Langmuir model was better than the Freundlich model to describe the adsorption process. Thermodynamic analysis indicated that the adsorption process of Cr(VI) on MHDB had an endothermic and spontaneous nature, and the increasing temperature was conducive to the adsorption. The main mechanisms of Cr(VI) adsorption might be the physical adsorption (electrostatic interactions) and chemical adsorption (ion exchange, the reduction of Cr(VI) to Cr(III)). The efficient adsorption of Cr(VI) makes MHDB a potential material for Cr(VI)-containing wastewater treatment. This study provides a feasible adsorption material for mitigating the environmental hazards of chromium, which has a certain reference value for protecting environmental health.

Integrating sulfur, iron(II), and fixed organic carbon for mixotrophic denitrification in a composite filter bed reactor for decentralized wastewater treatment: Performance and microbial community

Decentralized wastewater treatment in rural areas is an imperative challenge around the world, particularly in developing countries. The composite filter bed reactor is viable for decentralized wastewater treatment, but its performance on nitrogen removal often fluctuates with the unstable influent characteristics and loadings. Here, a composite filter bed reactor integrating sulfur, iron(II), and fixed organic carbon (shaddock peel) was developed and continuously operated under different conditions. The fixed organic carbon source promoted nitrogen removal with an efficiency higher than 90% and reduced effluent sulfate level by 40%, indicating that the integrated electron donors could improve the resistance and stability of the reactor. Moreover, sulfur-oxidizing bacteria (Thiomonas, Sulfuriferula, and Acidithiobacillus), iron-oxidizing bacteria (Ferritrophicum), and denitrifiers (Simplicispira and Hydrogenophaga) were identified in the anoxic/anaerobic layer of the reactor, suggesting that mixotrophic denitrification was stimulated by sulfur, iron(II), and fixed organic carbon. The findings of this study indicate that the developed reactor with the integrated electron donors could be reliable for carbon, nitrogen, and phosphorus removal and promising for the application of decentralized wastewater treatment.

Ecofriendly, selective removal of radioactive strontium ions in aqueous solutions using magnetic banana peels

Radionuclide Sr²⁺ in aqueous solution was removed using a large amount of banana peel (BP). Magnetized BP, mag@BP, was synthesized for recovery after the adsorption process. The synthesis was a very simple process of precipitation of BP with a magnetic substance. The synthesized adsorbent was thoroughly examined by performing Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction analysis, and vibration sample magnetometer analysis. Moreover, mag@BP has a Sr²⁺ maximum adsorption capacity of 23.827 mg/g according to isothermal adsorption, which is the best fit for the Langmuir isotherm model. In the pH effect experiment, the highest Sr²⁺ adsorption capacity was found at pH 9, and it has a spontaneous adsorption mechanism through experiments on temperature, time, and selectivity, and it reaches adsorption equilibrium within a short time and has high selectivity through competitive adsorption with Na⁺. In addition, an adsorption mechanism accompanied by ion exchange with K⁺ on the surface of BP, bonding with various functional groups, and electrical attraction were established. Therefore, mag@BP is suitable for use an environmentally friendly, low cost, and recoverable adsorbent for magnetic removal of Sr²⁺ from aqueous solutions. Further, unlike other carbon-based adsorbents, it does not cause cytotoxicity.

The Recovery of Phosphate and Ammonium from Biogas Slurry as Value-Added Fertilizer by Biochar and Struvite Co-Precipitation

Biowaste materials could be considered a renewable source of fertilizer if methods for recovering P from waste can be developed. Over the last few decades, there has been a high level of interest in using biochar to remove contaminants from aqueous solutions. This study was conducted using a range of salts that are commonly found in biogas slurry (ZnCl2, FeCl3, FeCl2, CuCl2, Na2CO3, and NaHCO3). Experiments with a biogas digester and aqueous solution were conducted at pH nine integration with NH4+, Mg2+, and PO43− molar ratios of 1.0, 1.2, and 1.8, respectively. The chemical analysis was measured to find out the composition of the precipitate, and struvite was employed to remove the aqueous solutions. The study found that the most efficient removal of phosphate and ammonium occurred at pH nine in Tongan sludge urban biochar and rice biochar, respectively. Increasing the concentration of phosphate and ammonium increased the phosphate and ammonium content. Moreover, increasing the biochar temperature and increasing the concentration of phosphate and ammonium increased the efficiency of the removal of ammonium and phosphate. The removal efficiency of ammonium and phosphate increased from 15.0% to 71.0% and 18.0% to 99.0%, respectively, by increasing the dose of respective ions K+, Zn2+, Fe3+, Fe2+, Cu2+, and CO32.The elements were increased from 58.0 to 71.0 for HCO3− with the increasing concentration from 30 mg L−1 to 240 mg L−1.This study concluded that phosphate and ammonium can be recovered from mushroom soil biochar and rice biochar, and phosphate can be effectively recovered via the struvite precipitation method.

Efficient degradation of p-nitrophenol by Fe@pomelo peel-derived biochar composites and its mechanism of simultaneous reduction and oxidation process

In this study, waste pomelo peels (PP) mixed with iron salts was treated successively with hydrothermal and pyrolyzing carbonization processes to obtain Fe(0) containing biochar composites (Fe@PP-Hy-Py) and the catalytic degradation of p-nitrophenol (PNP) using these Fe@PP-Hy-Py composites was studied. The results showed that the hydrothermal pre-treatment of the mixture of iron salts and pomelo peels was favorable for the incorporation of iron precursor within biomass network, which enabled copolymerization during the following pyrolysis. Through the pyrolysis process, the iron precursor was reduced in situ to amorphous Fe(0) dopped into the carbonaceous matrix, which conversely decreased the defect and disorder degree of pseudo-graphitic carbons and catalyzed the formation of environmental persistent free radicals (EPFRs). Degradation tests showed that the composites obtained at 600 °C with the theoretical Fe mass loading of 10% exhibited the greatest PNP degradation efficiency. Over 90% of 10 mg/L PNP was removed in 2 min under both N₂ and air conditions with 1.0 g/L of catalyst level. The degradation kinetics of PNP were all well fitted by the pseudo-first-order kinetics model with k_obs of Fe@PP-Hy-Py₆₀₀ being 0.953 min^-1. HPLC-QTOF/MS analysis demonstrated that both oxidation and reduction of PNP occurred as indicated by the detection of 4-aminophenol and ring opening compounds. The Fe(0) on the Fe@PP-Hy-Py was responsible for the reduction of PNP, while oxidation was induced by EPFRs. This study highlights the feasibility of synthesizing active heterogeneous Fe(0)-biochar composites by hydrothermal-pyrolysis route and the associated mechanisms of pollutant degradation.

Encapsulation of Activated Carbon into a Hollow-Type Spherical Bacterial Cellulose Gel and Its Indole-Adsorption Ability Aimed at Kidney Failure Treatment

For reducing side effects and improvement of swallowing, we studied the encapsulation of activated carbon formulations with a hollow-type spherical bacterial cellulose (HSBC) gel using two kinds of encapsulating methods: Methods A and B. In Method A, the BC gelatinous membrane was biosynthesized using Komagataeibacter xylinus (K. xylinus) at the interface between the silicone oil and cell suspension containing activated carbon. In Method B, the bacterial cellulose (BC) gelatinous membrane was formed at the interface between the cell suspension attached to the alginate gel containing activated carbon and the silicone oil. After the BC gelatinous membrane was biosynthesized by K. xylnus, alginate gel was removed by soaking in a phosphate buffer. The activated carbon encapsulated these methods could neither pass through the BC gelatinous membrane of the HSBC gel nor leak from the interior cavity of the HSBC gel. The adsorption ability was evaluated using indole, which is a precursor of the uremic causative agent. From curve-fitting, the adsorption process followed the pseudo-first-order and intra-particle diffusion models, and the diffusion of the indole molecules at the surface of the encapsulated activated carbon within the HSBC gel was dominant at the initial stage of adsorption. It was observed that the adsorption of the encapsulated activated carbon by the intraparticle diffusion process became dominant with longer adsorption times.

Phosphate sequestration by magnetic La-impregnated bentonite granules: A combined experimental and DFT study

To use the lanthanum hydroxide (La(OH)₃) as a low-cost, highly-efficient, and recyclable adsorbent, it could be embedded on a magnetic substance to improve its physical features and lower the overall cost. Herein, novel millimetric-size magnetic lanthanum-modified bentonite (La-MB) granules were fabricated for P sequestration, and the adsorption performance and mechanisms were systematic studied. The maximum capacity of P uptake by La-MB was up to 48.4 mg/g, which was higher than many previous reported La-based adsorbents. Moreover, the enhanced uptake of P was achieved over a wide pH range (3-9) and in the coexistence of common anions (Cl^-, NO₃^-, and SO₄^2-). Besides, the exhausted La-MB can be effectively regenerated by 5 mol/L NaOH with about 94.5% desorption efficiency and 60.8% uptake capacity remained during 5 cycles. The La-MB also exhibited excellent performance of anti-interference in two kinds of real wastewaters. The postsorption characterization and DFT calculations revealed that the electrostatic interaction and chemical precipitation jointly facilitated phosphate sequestration by La-MB during the rapid sorption phase, while ligand exchange and complexation reaction played more important roles than others during the slow sorption step. The electrostatic interaction not only effectively promoted the ligand exchange, and also further accelerated chemical precipitation via the formation of LaPO₄ during the whole process of phosphate uptake. Overall, millimetric La-MB is considered to have great potential for engineering application, and this work also provides new insights into the molecular-level mechanism of phosphate sequestration by La-MB.

High-effectively degrade the di-(2-ethylhexyl) phthalate via biochemical system: Resistant bacterial flora and persulfate oxidation activated by BC@Fe3O4

Di-(2-ethylhexyl) phthalate (DEHP) has been classified as a priority pollutant which increased the healthy risk to human and animals dramatically. Hence, a novel biochemical system combined by DEHP-resistant bacterial flora (B) and a green oxidant of persulfate (PS) activated by Nano-Fe₃O₄ was applied to degrade DEHP in contaminated soil. In this study, the resistant bacterial flora was screened from activated sludge and immobilized by sodium alginate (SAB). Nano-Fe₃O₄ was coated on biochar (BC@Fe₃O₄) to prevent agglomerating in soil. X-ray diffraction (XRD) and scanning electron microscope (SEM) were utilized to characterize BC@Fe₃O₄. Results demonstrated that the treatment of biochemical system (SAB + BC@Fe₃O₄ + PS) presented the maximum degradation rate about 92.56% within 24 days of incubation and improved soil microecology. The 16S rDNA sequences analysis of soil microorganisms showed a significantly different abundance and a similar diversity among different treatments. Kyoto Encyclopedia of Genes and Genomes (KEGG) functional genes difference analysis showed that some metabolic pathways, such as metabolism of cofactors and vitamins, energy metabolism, cell growth and death, replication and repair, were associated with the biodegradation of DEHP. Besides, DEHP was converted to MEHP and PA by biodegradation, while DEHP was converted to DBP and PA by persulfate and BC@Fe₃O₄, and then ultimately degraded to CO₂ and H₂O.

Fabrication of functionalized electrospun carbon nanofibers for enhancing lead-ion adsorption from aqueous solutions

Electrospinning technique is a simple and cheap method for fabrication of electrospun nanofibers (ENFs), which in turn can converted into electrospun carbon nanofibers (ECNFs) by carbonization process. The controlling of the ECNFs properties (e.g. surface area, porosity, diameters) during fabrication, make it superior over the other carbon nanomaterials. The aim of our study is to modify the surface of ECNFs to increase its hydrophilicity and in turn its efficiency in removing lead ions (Pb2+) from aqueous systems. The surface modification was carried out in two steps starting from oxidation of pristine ECNFs to produce oxidized ECNFs (o-ECNFs), followed by covalently bonded of melamine, and poly(m-phenylene diamine) for forming melamine-functionalized ECNFs (melam-ECNFs) and poly(m-phenylene diamine)-functionalized ECNFs (PmPDA-ECNFs), respectively. The as-prepared materials were characterized in routine way. The ability of the as-prepared materials towards adsorption of Pb2+ ions as heavy metal was investigated with the study of some factors such as pH solution, contact time, initial concentration and temperature. The adsorption process was analyzed isothermally, and kinetically. According to the values of the thermodynamic parameters, the adsorption of Pb2+ ions onto the functionalized ECNFs was endothermic and spontaneous, except with melam-ECNFs was exothermic.