Dual fluorescence of tetraphenylethylene-substituted pyrenes with aggregation-induced emission characteristics for white-light emission

Theoretical study of solvent effects on the white light emission mechanism of single molecule 4-OH-naphthalimide

Organic white light materials fabricated on the basis of single molecules have applied to manufacture the white light-emitting diodes due to their good photostability and relatively simple material preparation. In this work, the different fluorescence emission mechanisms of the NapH1 in n,n-dimethylformamide (DMF) and toluene are investigated to elucidate the process for generating single-molecule near-white-light. From the analysis of bond lengths and electrostatic potential analysis, the intermolecular hydrogen bond can form in DMF instead of in toluene. From the potential energy curves, it is clear that intermolecular proton transfer is not feasible in either DMF or toluene. Frontier molecular orbitals analysis, the dissociation constants and the vertical excitation energies are used to confirm that NapH1 can undergo the deprotonation process in DMF rather than in toluene. Combined with the calculations of the fluorescence values, only the original structure exists stably in toluene which emits blue fluorescence. And the dual fluorescence peaks of NapH1 in DMF are originated from the enol form and the deprotonated form, interacting jointly to emit near-white light. This work contributes to the investigation and advancement for single-molecule organic white luminescent materials.

AIE-Based & Organic Luminescent Materials: Nanoarchitectonics and Advanced Applications

Organic luminescence materials makes the molecule more enthusiastic in wide variety of applications. The luminescent organic materials are in a attraction of the researchers, and the Aggregation-Induced Emission (AIE) is attributed to the occurrence that particular chromophores (typically fluorophores) display very low or nearly no emission in the monomolecular soluble state but become highly emissive when forming aggregates in solution or in solid state. This phenomenon is relatively abnormal when compared with many other traditional fluorophores. AIE research suppresses aggregation-caused quenching (ACQ). Nevertheless, the carbon dots (CDs) and quantum dots have shown to have tyical florescence properties, therefore, recent years many researchers have also attracted for their developments. The CDs, luminescent, and AIE materials are not only used in biomedical applications and organic light-emitting diodes but also in sensing, self-assembly, and other areas. One should introduce promising material to a designed framework that exhibits AIE characteristics to ensure moral results in AIE. Amongest, AIE-active tetraphenylethylene (TPE) is attractive fluorophores due to its easy synthesis strategy. This review article discusses the synthesis properties of TPE, CDs, and luminescent materials with a broad range of applications. We have outlined linear, branched-shaped supramolecular, and hybrid macromolecules due to its potential in the future.

Robust Luminescent Pyrene-Based Metal-Organic Framework Hydrogel as a pH-Responsive Fluorescence Emitter for Sensitive Immunoassay of Cardiac Troponin I

Despite many luminescent advantages including outstanding absorption coefficient and high quantum yield, pyrene and its derivatives have been suffering from a dramatic aggregation-caused quenching (ACQ) effect. Although the dramatic ACQ effect of pyrene-based fluorophores has been restrained in pyrene-doped metal-organic frameworks (MOFs), the low loading of fluorescent (FL) units substantially impedes the improved luminescent behaviors. Herein, pyrene-based MOFs hydrogel was synthesized with a high loading of pyrene as the unique organic linker blocks instead of a dopant in MOFs. The gel matrix contributed to rigidifying the location of the FL emitters and achieving intensive FL emission and high luminescent stability and therefore efficiently overcoming the ACQ effect. Furthermore, the protonation of pyrene in the MOFs hydrogel remarkably decreased the luminescent intensity, which endowed the FL hydrogel with highly pH-responsive activity in the broad range (pH 4-10). Interestingly, glucose oxidase was immobilized into ZIF-8 as a highly efficient luminescent quencher, which contributed to catalyzing the form of gluconic acid and thus drastically quenching the FL signal of the MOFs hydrogel. Furthermore, the emitter-quencher pair of pyrene-based MOFs hydrogel and glucose oxidase was successfully employed to develop an ultrasensitive FL immunoassay platform for cardiac troponin I (as a model analyte). The limit of detection for cardiac troponin I was 5.2 pg/mL (3σ). The proof-of-principle study demonstrated the thrilling auxiliary effect of tailorable MOFs hydrogel on boosting the feasibility of aqueous insoluble FL chromophores for trace analysis.

A temperature sensor with a wide spectral range based on a dual-emissive TADF dendrimer system

Dual emission from thermally activated delayed fluorescence (TADF) emitters is often difficult to observe, especially in solution, limited by Kasha's rule. Two TADF dendrimers containing N-doped polycyclic aromatic hydrocarbons as acceptors are designed and synthesized. Compound 2GCzBPN, having a strongly twisted geometry, exhibits TADF, while 2GCzBPPZ, possessing a less twisted geometry, shows dual emission associated with the monomer and aggregate that is TADF. The demonstration reveals that 2GCzBPPZ can serve as a temperature sensor with excellent temperature sensitivity and remarkably wide emission color response in solution. By embedding 2GCzBPPZ in paraffin we demonstrate a spatial-temperature sensor that shows a noticeable emission shift from yellow to green and ultimately to blue as the temperature increases from 20 to 200 °C. We finally demonstrate the utility of these TADF dendrimers in solution-processed organic light-emitting diodes.

Utilizing weakly donor-acceptor ternary π-conjugated architecture to achieve single-component white luminescence and stimulus-responsive room-temperature phosphorescence

Purely organic room-temperature phosphorescence (RTP) has garnered substantial attention for its delayed emission, environmental sensitivity, and potential diverse applications. However, the quest for high-performance RTP materials has always been a challenge. In this study, we introduce novel weakly donor-acceptor (D-A) ternary π-conjugated architecture to construct an efficient RTP system. The strategy utilizes synergistic effects of the analogous El-Sayed rule, halogen-free heavy-atom effect, reduction of the singlet-triplet energy gap, and manipulation of flexible molecular conformation. A remarkable enhancement in the phosphorescence-to-fluorescence ratio was achieved, elevating from 0.4 in carbazole to 35.2 in DBTDBTCZ. Furthermore, the RTP system demonstrates single-component white luminescence, yielding warm and cool white colors. Intriguingly, we unveil the novel position-dependent heavy-atom effects, discerningly promoting intersystem crossing or phosphorescence decay. Benefiting from efficient RTP, multifunctional applications of real-time humidity monitoring, oxygen sensing, anti-counterfeiting labeling, and white lighting are demonstrated.

In Situ Photogenerated Radicals of Hydroxyl Substituted Pyrene-Based Triphenylamines with Enhanced Transport and Free Doping/Post-Oxidation for Efficient Perovskite Solar Cells

The high-performance hole transporting material (HTM) is one of the most important components for the perovskite solar cells (PSCs) in promoting power conversion efficiency (PCE). However, the low conductivity of HTMs and their additional requirements for doping and post-oxidation greatly limits the device performance. In this work, three novel pyrene-based derivatives containing methoxy-substituted triphenylamines units (PyTPA, PyTPA-OH and PyTPA-2OH) are designed and synthesized, where different numbers of hydroxyl groups are connected at the 2- or 2,7-positions of the pyrene core. These hydroxyl groups at the 2- or 2,7-positions of pyrene play a significantly role to enhance the intermolecular interactions that are able to generate in situ radicals with the assistance of visible light irradiation, resulting in enhanced hole transferring ability, as well as an enhanced conductivity and suppressed recombination. These pyrene-core based HTMs exhibit excellent performance in PSCs, which possess a higher PCE than those control devices using the traditional spiro-OMeTAD as the HTM. The best performance can be found in the devices with PyTPA-2OH. It has an average PCE of 23.44% (PCEmax = 23.50%), which is the highest PCE among the reported PSCs with the pyrene-core based HTMs up to date. This research offers a novel avenue to design a dopant-free HTM by the combination of the pyrene core, methoxy triphenylamines, and hydroxy groups.

Phosphine-Catalyzed 1,2-cis-Diboration of 1,3-Butadiynes

Trialkyl phosphines PMe3 and PEt3 catalyze the 1,2-cis-diboration of 1,3-butadiynes to give 1,2-diboryl enynes. The products were utilized to synthesize 1,1,2,4-tetraaryl enynes using a Suzuki-Miyaura protocol and can readily undergo proto-deborylation.

Regulable high-contrast mechanofluorochromic enhancement behaviour based on substituent effects

Herein, a facile strategy was established to build mechanoresponsive luminogens with high sensitivity to substituents and positional effects. Even in slightly different structures, distinct optical phenomena, including fluorescence efficiency and mechano-responsive properties, were clearly present. Outstanding mechanical-induced emission enhancement (5-100 times) properties and reversibility makes for promising applications in pressure sensors and OLEDs.

Influence of Steric Effects on the Emission Behavior of Pyrene-Based Blue Luminogens

Pyrene-based derivatives have been widely deployed in organic luminescent materials because of their bright fluorescence, high charge carrier mobility, and facile modification. Nevertheless, the fluorescence output of conventional pyrenes is prone to quenching upon aggregation due to extensive intermolecular π-π stacking interactions. To address this issue, a set of new Y-shaped pyrene-containing luminogens are synthesized from a new bromopyrene chemical precursor, 2-hydroxyl-7-tert-butyl-1,3-bromopyrene, where the bromo and hydroxyl groups at the pyrene core can be readily modified to obtain the target products and provide great flexibility in tuning the photophysical performances. When the hydroxy group at the 2-position of pyrene was replaced by a benzyl group, the steric hindrance of the benzyl group not only efficiently inhibits the detrimental intermolecular π-π stacking interactions but also rigidifies the molecular conformation, resulting in a narrow-band blue emission. Moreover, the TPE-containing compounds 2c and 3c possessed characteristic aggregation-induced emission (AIE) properties with fluorescence quantum yields of up to 66% and 38% in the solid state, respectively. Thus, this article has methodically investigated the factors influencing the optical behavior, such as intermolecular interactions, and the steric effects of the substituent group, thereby opening up the potential to develop narrow-band pyrene-based blue emitters for OLED device applications.

Recent Advances in Construction Strategies for Fluorescence Sensing Films

A year ago, film-based fluorescent sensors (FFSs) were recognized in the "IUPAC Top Ten Emerging Technologies in Chemistry 2022" due to their extensive application in detecting hidden explosives, illicit drugs, and volatile organic compounds. These sensors offer high sensitivity, specificity, immunity to light scattering, and noninvasiveness. The core of FFSs is the construction of high-performance fluorescent sensing films, which are dependent on the processes of "energy transfer" and "mass transfer" in the active layer and involve complex interactions between sensing molecules and analytes. This Perspective focuses on the latest strategies in constructing these films, emphasizing the design of sensing molecules with various innovative features and structures that enhance the mass transfer efficiency. Additionally, it discusses the ongoing challenges and potential advancements in the field of FFSs.

Investigation of Mechanochromic Luminescence of Pyrene-based Aggregation-Induced Emission Luminogens: Correlation between Molecular Packing and Luminescence Behavior

To better understand the correlation between molecular structure and optical properties such as aggregation-induced emission (AIE) and mechanochromic luminescence (MCL) emission, two new pyrene-based derivatives with substitutions at the 4- and 5-positions (1HH) and at the 4-, 5-, 9-, and 10-positions (2HH) were designed and synthesized. Cyano groups were introduced at the periphery of the synthesized compounds (1HCN, 1OCN, 1BCN, 2HCN, 2OCN, and 2BCN) to investigate the influence of these groups on the emission properties of the pyrene derivatives both in solution and in the solid state. The fluorescence emission performance of these compounds in water/acetone mixtures was simultaneously studied, revealing outstanding aggregation-induced emission properties. The typical shift in emission maxima to higher values was attributed to J-aggregate formation in the aggregate state. Careful investigation of the crystal structures demonstrated abundant and intense intermolecular interactions, such as C-H…π and C-H…N hydrogen bonds, contributing to the remarkable mechanochromic luminescence performance of these compounds. The MCL properties of all the compounds were investigated using powder X-ray diffraction, and the remarkable mechanochromic properties were attributed to J-aggregate phenomena in the solid state. These results provide valuable insights into the structure-property relationship of organic MCL materials, guiding the design of efficient organic MCL materials.

Aggregation behaviour of pyrene-based luminescent materials, from molecular design and optical properties to application

Molecular aggregates are self-assembled from multiple molecules via weak intermolecular interactions, and new chemical and physical properties can emerge compared to their individual molecule. With the development of aggregate science, much research has focused on the study of the luminescence behaviour of aggregates rather than single molecules. Pyrene as a classical fluorophore has attracted great attention due to its diverse luminescence behavior depending on the solution state, molecular packing pattern as well as morphology, resulting in wide potential applications. For example, pyrene prefers to emit monomer emission in dilute solution but tends to form a dimer via π-π stacking in the aggregation state, resulting in red-shifted emission with quenched fluorescence and quantum yield. Over the past two decades, much effort has been devoted to developing novel pyrene-based fluorescent molecules and determining the luminescence mechanism for potential applications. Since the concept of "aggregation-induced emission (AIE)" was proposed by Tang et al. in 2001, aggregate science has been established, and the aggregated luminescence behaviour of pyrene-based materials has been extensively investigated. New pyrene-based emitters have been designed and synthesized not only to investigate the relationships between the molecular structure and properties and advanced applications but also to examine the effect of the aggregate morphology on their optical and electronic properties. Indeed, new aggregated pyrene-based molecules have emerged with unique properties, such as circularly polarized luminescence, excellent fluorescence and phosphorescence and electroluminescence, ultra-high mobility, etc. These properties are independent of their molecular constituents and allow for a number of cutting-edge technological applications, such as chemosensors, organic light-emitting diodes, organic field effect transistors, organic solar cells, Li-batteries, etc. Reviews published to-date have mainly concentrated on summarizing the molecular design and multi-functional applications of pyrene-based fluorophores, whereas the aggregation behaviour of pyrene-based luminescent materials has received very little attention. The majority of the multi-functional applications of pyrene molecules are not only closely related to their molecular structures, but also to the packing model they adopt in the aggregated state. In this review, we will summarize the intriguing optoelectronic properties of pyrene-based luminescent materials boosted by aggregation behaviour, and systematically establish the relationship between the molecular structure, aggregation states, and optoelectronic properties. This review will provide a new perspective for understanding the luminescence and electronic transition mechanism of pyrene-based materials and will facilitate further development of pyrene chemistry.

Single molecule aggregation-induced dual and white-light emissive etherified aroyl-S,N-ketene acetals via one-pot synthesis

Etherified aroyl-S,N-ketene acetals are readily synthesized by a novel one-pot addition-elimination-Williamson-etherification sequence. Although the underlying chromophore remains constant, derivatives show pronounced color-tuning of solid-state emission and AIE characteristics, whereas a hydroxy-methyl derivative represents an easily accessible mono molecular aggregation-induced white-light emitter.

A dual-function probe with aggregation-induced emission feature for Cu2+ detection and chemodynamic therapy

Herein, a fluorescent probe (named TPACP) with aggregation-induced emission (AIE) feature was developed and utilized for the selective detection of Cu²⁺ with high sensitivity and fast-response. The resultant TPACP@Cu²⁺ complexes from coordination of TPACP with Cu²⁺ can also be potentially applied for chemodynamic and photodynamic therapy.

Impact of Electron-Donating Groups on Attaining Dual-Emitting Imidazole-Based Donor-Acceptor Materials

Imidazole-based donor-acceptor materials are well known for their polarity-controlled trade-off phenomenon between the localized excitation-based short-wavelength (SW) emission in nonpolar solvents and charge transfer dominated long-wavelength (LW) emission in polar solvents. To attain concurrent SW- and LW-based dual-emission characteristics, a series of imidazole-based donor-acceptor fluorophores (CBImDCN, TPImDCN, PZImDCN) possessing different electron-donating groups such as carbazole, triphenylamine, and phenothiazine linked via the N-position of the imidazole core unit were synthesized and verified by NMR and mass spectroscopic techniques. As a result, the strong donating TPImDCN and PZImDCN exhibited dual emission in different solvents of varying polarity, covering the blue (SW) and green/orange (LW) regions. On the other hand, in contrast, only an SW emission band is observed with the weak donating CBImDCN. Moreover, PZImDCN shows panchromatic emission under 365 nm illumination, while only orange color emission is observed under visible light excitation, revealing two different origins of SW and LW emissions, as also evidenced from DFT calculations. Overall, this work reveals a new approach for attaining concurrent SW and LW emission characteristics from imidazole-based D-A materials and sheds light on the design and development of novel panchromatic emitters with intriguing properties for lighting and display applications.

Role of Sterically Bulky Azobenzenes in the Molecular Assembly of Pyrene Derivatives: Rectangular Sheet-like Structures and Their Emission Characteristics

The development of pyrene-based fluorescent assembled systems with desirable emission characteristics by reducing conventional concentration quenching and/or aggregation-induced quenching (ACQ) is highly desirable. In this investigation, we designed a new azobenzene-functionalized pyrene derivative (AzPy) in which sterically bulky azobenzene is linked to pyrene. Absorption and fluorescence spectroscopic results before and after molecular assembly indicate that even in a dilute N,N-dimethylformamide (DMF) solution (~10 μM), AzPy molecules experienced significant concentration quenching, whereas the emission intensities of AzPy DMF-H2O turbid suspensions containing self-assembled aggregates were slightly enhanced and showed similar values regardless of the concentration. The shape and size of sheet-like structures, from incomplete flakes less than one micrometer in size to well-completed rectangular microstructures, could be adjusted by changing the concentration. Importantly, such sheet-like structures exhibit concentration dependence of their emission wavelength from blue to yellow-orange. Comparison with the precursor (PyOH) demonstrates that the introduction of a sterically twisted azobenzene moiety plays an important role in converting the spatial molecular arrangements from H- to J-type aggregation mode. Thus, AzPy chromophores grow into anisotropic microstructures through inclined J-type aggregation and high crystallinity, which are responsible for their unexpected emission characteristics. Our findings provide useful insight into the rational design of fluorescent assembled systems.

Spectroscopic characterization and assessment of microbiological potential of 1,3,4-thiadiazole derivative showing ESIPT dual fluorescence enhanced by aggregation effects

In the presented study, advanced experimental techniques, including electronic absorption and fluorescence spectroscopies [with Resonance Light Scattering (RLS)], measurements of fluorescence lifetimes in the frequency domain, calculations of dipole moment fluctuations, quantum yields, and radiative and non-radiative transfer constants, were used to characterize a selected analogue from the group of 1,3,4-thiadiazole, namely: 4-[5-(naphthalen-1-ylmethyl)-1,3,4-thiadiazol-2-yl]benzene-1,3-diol (NTBD), intrinsically capable to demonstrate enol → keto excited-states intramolecular proton transfer (ESIPT) effects. The results of spectroscopic analyses conducted in solvent media as well as selected mixtures were complemented by considering biological properties of the derivative in question, particularly in terms of its potential microbiological activity. The compound demonstrated a dual fluorescence effect in non-polar solvents, e.g. chloroform and DMSO/H₂O mixtures, while in polar solvents only a single emission maximum was detected. In the studied systems, ESIPT effects were indeed observed, as was the associated phenomenon of dual fluorescence, and, as demonstrated for the DMSO: H₂O mixtures, the same could be relatively easily induced by aggregation effects related to aggregation-induced emission (AIE). Subsequently conducted quantum-chemical (TD-)DFT calculations supported further possibility of ESIPT effects. The following article provides a comprehensive description of the spectroscopic and biological properties of the analyzed 1,3,4-thiadiazole derivatives, highlighting its potential applicability as a very good fluorescence probes as well as a compound capable of high microbiological activity.

Unraveling the Mechanistic Pathway for the Dual Fluorescence in Green Fluorescent Protein (GFP) Chromophore Analogue: A Detailed Theoretical Investigation

The photophysical properties of the para-sulfonamide (p-TsABDI) analogue of the green fluorescent protein (GFP) chromophore with both proton donating and accepting sites have been exploited in polar solvents to understand the origin of the unusual dual fluorescence nature of the chromophore. In the polar solvents, the compound undergoes structural rearrangement upon photoexcitation, leading to the ultrafast excited-state intermolecular proton transfer (ESIPT) phenomenon at the S₁ surface. In this work, we employed both the static electronic structure calculations and on-the-fly molecular dynamics simulation to unravel the underlying reason for this peculiar behavior of the p-TsABDI analogue in polar solvents. To represent this adequately and provide extensive information on the ESIPT mechanism mediated by the solvent molecules, we considered explicit solvent molecules using the integral equation formalism variant of polarizable continuum (IEFPCM) model. From the static calculation analysis, we can conclude that the dual emissive behavior of the compound is ascribed to the proton transfer (PT) phenomena in the excited-state. However, based on the static calculation exclusively, it is hard to ascertain the mechanistic pathway of the PT phenomena. Hence, to investigate the dynamics and reaction mechanism for the ESIPT process, we performed the on-the-fly dynamics simulation for p-TsABDI in solvent clusters. Dynamics simulation results reveal that, based on the time lag between all the proton transfer processes, the ESIPT mechanism occurs in a stepwise manner from the benzylidene moiety of the chromophore to its imidazolinone moiety. However, the nonexistence of crossings between the S₁- and S₀-states confirms the PT characteristics of the reactions.

Recent Advances in Excimer-Based Fluorescence Probes for Biological Applications

The fluorescent probe is a powerful tool for biological sensing and optical imaging, which can directly display analytes at the molecular level. It provides not only direct visualization of biological structures and processes, but also the capability of drug delivery systems regarding the target therapy. Conventional fluorescent probes are mainly based on monomer emission which has two distinguishing shortcomings in practice: small Stokes shifts and short lifetimes. Compared with monomer-based emission, excimer-based fluorescent probes have large Stokes shifts and long lifetimes which benefit biological applications. Recent progress in excimer-based fluorescent sensors (organic small molecules only) for biological applications are highlighted in this review, including materials and mechanisms as well as their representative applications. The progress suggests that excimer-based fluorescent probes have advantages and potential for bioanalytical applications.

Triple Regioselective Functionalization of Cationic [4]Helicenes via Iridium-Catalyzed Borylation and Suzuki Cross-Coupling Reactivity

In essentially one-pot, using Ir- and Pd-catalysis, tris(arene)-functionalized cationic [4]helicenes are synthesized with full regioselectivity and enantiospecificity starting from a trivial precursor (17 examples). This poly-addition of aryl groups improves key optical properties, that is, fluorescence quantum yields and lifetimes. Electronic circular dichroism and circularly polarized luminescence signatures are observed up to the far-red domain, in particular with additional arenes prone to aggregation.

Fatty Acids/Tetraphenylethylene Conjugates: Hybrid AIEgens for the Preparation of Peptide-Based Supramolecular Gels

Aggregation-induced emissive materials are gaining particular attention in the last decades due to their wide application in different fields, from optical devices to biomedicine. In this work, compounds having these kinds of properties, composed of tetraphenylethylene scaffold combined with fatty acids of different lengths, were synthesized and characterized. These molecules were found able to self-assemble into different supramolecular emissive structures depending on the chemical composition and water content. Furthermore, they were used as N-terminus capping agents in the development of peptide-based materials. The functionalization of a 5-mer laminin-derived peptide led to the obtainment of luminescent fibrillary materials that were not cytotoxic and were able to form supramolecular gels in aqueous environment.

Intermolecular Hydrogen-Bond-Assisted Solid-State Dual-Emission Molecules with Mechanical Force-Induced Enhanced Emission

Hydrogen bonds not only play a crucial role in the life sciences but also endow molecules with fantastic physical and chemical properties, which help in the realization of their high-tech applications. This work presents an efficient strategy for achieving highly efficient solid-state dual-emission blue emitters with mechanical force-induced enhanced emission properties via intermolecular hydrogen bonds via novel pyrene-based intermediates, namely, 1,3,6,8-tetrabromo-2,7-dihydroxypyrene (1) and 1,3,6,8-tetrabromo-2-hydroxypyrene (2), prepared via hydroxylation and bromination of pyrene in high yields. Moreover, further use of a classical Pd-catalyzed coupling reaction affords new pyrene-based luminescent materials 3-5, which display high thermal stability (in range of 336-447 °C), blue emission (<463 nm), and high quantum yields in solution. Interestingly, with the monosubstituted hydroxyl (OH) or methoxy (OMe) group located at position 2 of pyrene, compounds 4a and 5 display exciting dual emission with mechanical force-induced enhanced emission properties, due to the presence of several hydrogen-bond interactions. Moreover, this series of compounds exhibits numerous advantages, for example, deeper blue emission with a narrower full width at half-maximum, a stronger steric effect, and higher hydrophilicity. Thus, these novel bromopyrene intermediates and related pyrene-based luminescent materials will pave the way for further exploration of novel organic solid-state luminescent materials for potential application in organic electronics, bioimaging, chemosensors, etc.

Asymmetrically bridged aroyl-S,N-ketene acetal-based multichromophores with aggregation-induced tunable emission

Asymmetrically bridged aroyl-S,N-ketene acetals and aroyl-S,N-ketene acetal multichromophores can be readily synthesized in consecutive three-, four-, or five-component syntheses in good to excellent yields by several successive Suzuki-couplings of aroyl-S,N-ketene acetals and bis(boronic)acid esters. Different aroyl-S,N-ketene acetals as well as linker molecules yield a library of 23 multichromophores with substitution and linker pattern-tunable emission properties. This allows control of different communication pathways between the chromophores and of aggregation-induced emission (AIE) and energy transfer (ET) properties, providing elaborate aggregation-based fluorescence switches.

A library of 23 asymmetrically linked aroyl-S,N-ketene acetal solid-state emissive multichromophores accessed by one-pot multicomponent reactions exhibits AIE- and AIEE-active behavior as well as dual emission and potential energy transfer.

Oxidative evolution of Z/E-diaminotetraphenylethylene

We report that Z/E-diaminotetraphenylethylene (Z/E-2NH₂-TPE) molecules suffer primarily from oxidative evolution rather than recognized isomerization. The oxide is separated and its structure is deciphered by single crystal X-ray diffraction. The oxidative evolution accompanying the rearrangement is explained through quantum theoretical calculation.

Precise Molecular Design of a Pair of New Regioisomerized Fluorophores With Opposite Fluorescent Properties

Aggregation-induced emission (AIE) has attracted much attention in the past 2 decades. To develop novel AIE-active materials, ACQ-to-AIE transformation via regioisomerization is one of the most straightforward method. However, most of the reported ACQ-to-AIE transformations are achieved by migrating bulky units. In this work, a facile conversion was realized by migrating a small pyrrolidinyl group from para- to ortho-position on the rofecoxib scaffold. As a result, a pair of new isomers named MOX2 and MOX4 exhibited AIE behavior and ACQ activity, respectively. Moreover, MOX2 also showed solvatochromic, mechanochromic, and acidochromic properties with reversible multi-stimulus behavior. Single crystal X-ray analysis of MOX2 revealed that the molecular conformation and its packing mode were responsible for the AIE emission behavior. Further investigation indicated that MOX2 showed high lipid droplets staining selectivity. Taken together, the current work not only provides a new design philosophy for achieving ACQ-to-AIE conversion by migrating a small pyrrolidinyl group but also presents a promising candidate MOX2 for potential applications such as in security ink, optical recording and biological applications.

Chiral assembly of organic luminogens with aggregation-induced emission

Chirality is important to chemistry, biology and optoelectronic materials. The study on chirality has lasted for more than 170 years since its discovery. Recently, chiral materials with aggregation-induced emission (AIE) have attracted increasing interest because of their fascinating photophysical properties. In this review, we discussed the recent development of chiral materials with AIE properties, including their molecular structures, self-assembly and functions. Generally, the most effective strategy to design a chiral AIE luminogen (AIEgen) is to attach a chiral scaffold to an AIE-active fluorophore through covalent bonds. Moreover, some propeller-like or shell-like AIEgens without chiral units exhibit latent chirality upon mirror image symmetry breaking. The chirality of achiral AIEgens can also be induced by some optically active molecules through non-covalent interactions. The introduction of an AIE unit into chiral materials can enhance the efficiency of their circularly polarized luminescence (CPL) in the solid state and the dissymmetric factors of their helical architectures formed through self-assembly. Thus, highly efficient circularly polarized organic light-emitting diodes (CPOLEDs) with AIE characteristics are developed and show great potential in 3D displays. Chiral AIEgens are also widely utilized as "turn on" sensors for rapid enantioselective determination of chiral reagents. It is anticipated that the present review can entice readers to realize the importance of chirality and attract much more chemists to contribute their efforts to chirality and AIE study.

Structure-controlled intramolecular charge transfer in asymmetric pyrene-based luminogens: synthesis, characterization and optical properties

Four asymmetric D–A type pyrene-based luminogens with tunable optical properties were synthesized, which provide an efficient strategy to achieve pyrene-based full-color photoelectric materials.

Ultrafast sorting: Excimeric π-π stacking distinguishes pyrene-N-methylacetamide isomers on the ultrafast time scale

Pyrene based molecules are inclined to form excimers through self-association upon photoexcitation. In this work, the pyrene core is functionalized with the N-methylacetamide group at the position 1 or 2 to develop pyren-1-methylacetamide (PyMA1) and pyren-2-methylacetamide (PyMA2), respectively. Upon photoexcitation with 345 nm, a portion of molecules in PyMA1 and PyMA2 solutions at ≥1.0 mM have formed static excimers. The steady state spectroscopic measurements suggest that, whether it is the dimerization of molecules in the ground state (GS) or in excimer formation, characteristic signs are more pronounced in PyMA1 than its isomeric counterpart, PyMA2. The shift of the excimer band in their respective emission spectra suggests that the extent of overlap in π-π stacking is greater for PyMA1 than for PyMA2 in the excited state. The optimized geometry of dimers in toluene shows that the overlapping area between the pyrene moieties in π-π stacking between the dimers is greater for PyMA1 than for PyMA2 in GS. The natural bond orbital analysis with the optimized GS geometries shows that the stabilization/interaction energy between the dimers in π-π stacking is higher in PyMA1 compared to PyMA2 in toluene. The transient absorption (TA) measurements in toluene over the fs-ps regime (fs-TA) showed that the formation of static excimers with pre-associated dimers in PyMA1 happens in ∼700 fs whereas the excimers for the pre-associated dimers in PyMA2 have formed in slightly slower time scale (∼1.95 ps). Contrary to what was observed in solution, the extent of overlap in π-π stacking is lower for PyMA1 dimers (∼17%) than for PyMA2 dimers (∼37%) in single crystals.

A simple pillar[5]arene assembled multi-functional material with ultrasensitive sensing, self-healing, conductivity and host-guest stimuli-responsive properties

Multi-functional materials have received wide attention due to their potential applications in various fields; therefore, developing a simple and easy strategy for the preparation of multi-functional materials is an interesting issue. In this work, a novel supramolecular gel, TP-QG, has been successfully constructed via the assembly of a simple methoxyl-pillar[5]arene host (TP) and a tripodal (tri-pyridine-4-yl)-amido-benzene guest (Q). Interestingly, TP-QG could act as a multi-functional material and showed strong fluorescence, good self-healing, host-guest stimuli-responsiveness and conductive properties. Due to these properties, TP-QG shows a fascinating application prospect. For instance, TP-QG could exhibit ultrasensitive fluorescence response for Fe³⁺ and F^- in water via the fluorescence "ON-OFF-ON" pathway; the lowest detection limit (LOD) of TP-QG for Fe³⁺ was 2.32 × 10^-10 M and the LOD of TP-QG-Fe for F^- was 4.30 × 10^-8 M. These properties permit TP-QG to act as not only a Fe³⁺ and F^- sensor, but also an "ON-OFF-ON" fluorescence display material and an efficient logic gate. Meanwhile, the xerogel of TP-QG could remove Fe³⁺ from water, and the adsorption ratio was 98.68%; the xerogel of TP-QG-Fe could also remove F^- from water; the removal ratio was about 87.92%. This work provides a feasible way to construct multi-functional smart materials by host-guest assembly.

Confinement-guided photophysics in MOFs, COFs, and cages

In this review, the dependence of the photophysical response of chromophores in the confined environments associated with crystalline scaffolds, such as metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and molecular cages, has been carefully evaluated. Tunability of the framework aperture, cavity microenvironment, and scaffold topology significantly affects emission profiles, quantum yields, or fluorescence lifetimes of confined chromophores. In addition to the role of the host and its effect on the guest, the methods for integration of a chromophore (e.g., as a framework backbone, capping linker, ligand side group, or guest) are discussed. The overall potential of chromophore-integrated frameworks for a wide-range of applications, including artificial biomimetic systems, white-light emitting diodes, photoresponsive devices, and fluorescent sensors with unparalleled spatial resolution are highlighted throughout the review.

Emerging trends in aggregation induced emissive luminogens as bacterial theranostics

The emergence and spread of pathogenic bacteria, particularly antibiotic-resistant strains pose grave global concerns worldwide, which demand for the rapid development of highly selective and sensitive strategies for specific bacterial detection, identification, imaging and therapy. The fascinating feature of aggregation-induced emissive molecules (AIEgens) to display fluorescence in aggregate form can be suitably coupled with nanotechnology for developing theranostic AIE dots that can offer convenient and customised functions such as sensing, imaging, detection, discrimination and cell kill of different bacterial types. The initial section of the article reveals the necessity for incorporating diagnostic imaging with antibacterial therapy, while the latter part delivers mechanistic insights on the benefits of AIE fluorophores in theranostic applications. Further, the review illustrates the recent advancements of AIEgens as theranostic nanolights in bacterial detection, identification and eradication. The review is organised according to the different classes of AIE-active bacterial theranostics such as carrier-free nanoprodrugs, nanomachines for synergistic imaging-guided cancer treatment and bacterial kill, AIE polymers, bioconjugates and nanoparticle carriers. By elucidating their design principles and applications, as well as highlighting the recent trends and perspectives that can be further explored, we hope to instill more research interest in AIE bacterial theranostics for future translational research.HighlightsCombination of aggregation induced emissive fluorophores and nanotechnology for developing bacterial theranostics.AIE theranostics with customised functions for bacterial imaging, detection, discrimination and cell kill.

Pillararene-based AIEgens: research progress and appealing applications

The pillararene-based AIEgens and AIE materials, constructed using different assembly forms, show attractive applications in various areas.

A new imidazole based phenanthridine probe for ratiometric fluorescence monitoring of methanol in biodiesel

We prepared and characterized an array of polarity-sensitive fluorescent dyes (7and 9a, 9b and 9c). for detection of methanol

Dual emission in purely organic materials for optoelectronic applications

Purely organic molecules, which emit light by dual emissive (DE) pathways, have received increased attention in the last decade. These materials are now being utilized in practical optoelectronic, sensing and biomedical applications. In order to further extend the application of the DE emitters, it is crucial to gain a fundamental understanding of the links between the molecular structure and the underlying photophysical processes. This review categorizes the types of DE according to the spin multiplicity and time range of the emission, with emphasis on recent experimental advances. The design rules towards novel DE molecular candidates, the most perspective types of DE and possible future applications are outlined. These exciting developments highlight the opportunities for new materials synthesis and pave the way for accelerated future innovation and developments in this area.

Copper-catalyzed arylation of polycyclic aromatic hydrocarbons by the P[double bond, length as m-dash]O group

The first example of a directed and regioselective arylation of polycyclic aromatic hydrocarbons (PAHs) by using a P[double bond, length as m-dash]O directing group is reported herein. The protocol uses a cheap copper catalyst, and results in a breakthrough meta-selective C-H functionalization of arylphosphine oxide compounds. Substrates with potential fluorescence properties, for example, pyrene and fluoranthene, were successfully arylated under the system, thus achieving an efficient modification of fluorescent molecules containing the P[double bond, length as m-dash]O functional group.