Reduction of CO2 by a masked two-coordinate cobalt(i) complex and characterization of a proposed oxodicobalt(ii) intermediate

Controlling the Activation at NiII -CO2 2- Moieties through Lewis Acid Interactions in the Second Coordination Sphere

Nickel complexes with a two-electron reduced CO2 ligand (CO2 2- , "carbonite") are investigated with regard to the influence alkali metal (AM) ions have as Lewis acids on the activation of the CO2 entity. For this purpose complexes with NiII (CO2 )AM (AM=Li, Na, K) moieties were accessed via deprotonation of nickel-formate compounds with (AM)N(i Pr)2 . It was found that not only the nature of the AM ions in vicinity to CO2 affect the activation, but also the number and the ligation of a given AM. To this end the effects of added (AM)N(R)2 , THF, open and closed polyethers as well as cryptands were systematically studied. In 14 cases the products were characterized by X-ray diffraction and correlations with the situation in solution were made. The more the AM ions get detached from the carbonite ligand, the lower is the degree of aggregation. At the same time the extent of CO2 activation is decreased as indicated by the structural and spectroscopic analysis and reactivity studies. Accompanying DFT studies showed that the coordinating AM Lewis acidic fragment withdraws only a small amount of charge from the carbonite moiety, but it also affects the internal charge equilibration between the LtBu Ni and carbonite moieties.

Photocatalytic Reduction of CO2 to HCOOH and CO by a Phosphine-Bipyridine-Phosphine Ir(III) Catalyst: Photophysics, Nonadiabatic Effects, Mechanism, and Selectivity

Photocatalytic CO2 reduction is one of the best solutions to solve the global energy crisis and to realize carbon neutralization. The tetradentate phosphine-bipyridine (bpy)-phosphine (PNNP)-type Ir(III) photocatalyst, Mes-IrPCY2, was reported with a high HCOOH selectivity but the photocatalytic mechanism remains elusive. Herein, we employ electronic structure methods in combination with radiative, nonradiative, and electron transfer rate calculations, to explore the entire photocatalytic cycle to either HCOOH or CO, based on which a new mechanistic scenario is proposed. The catalytic reduction reaction starts from the generation of the precursor metal-to-ligand charge transfer (3 MLCT) state. Subsequently, the divergence happens from the 3 MLCT state, the single electron transfer (SET) and deprotonation process lead to the formation of one-electron-reduced species and Ir(I) species, which initiate the reduction reaction to HCOOH and CO, respectively. Interestingly, the efficient occurrence of proton or electron transfer reduces barriers of critical steps. In addition, nonadiabatic transitions play a nonnegligible role in the cycle. We suggest a lower free-energy barrier in the reaction-limiting step and the very efficient SET in 3 MLCT are cooperatively responsible for a high HCOOH selectivity. The gained mechanistic insights could help chemists to understand, regulate, and design photocatalytic CO2 reduction reaction of similar function-integrated molecular photocatalyst.

Cleavage of Carbon Dioxide C=O Bond Promoted by Nickel-Boron Cooperativity in a PBP-Ni Complex

The synthesis and characterization of (tBu PBP)Ni(OAc) (5) by insertion of carbon dioxide into the Ni-C bond of (tBu PBP)NiMe (1) is presented. An unexpected CO2 cleavage process involving the formation of new B-O and Ni-CO bonds leads to the generation of a butterfly-structured tetra-nickel cluster (tBu PBOP)2 Ni4 (μ-CO)2 (6). Mechanistic investigation of this reaction indicates a reductive scission of CO2 by O-atom transfer to the boron atom via a cooperative nickel-boron mechanism. The CO2 activation reaction produces a three-coordinate (tBu P2 BO)Ni-acyl intermediate (A) that leads to a (tBu P2 BO)-NiI complex (B) via a likely radical pathway. The NiI species is trapped by treatment with the radical trap (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) to give (tBu P2 BO)NiII (η2 -TEMPO) (7). Additionally, 13 C and 1 H NMR spectroscopy analysis using 13 C-enriched CO2 provides information about the species involved in the CO2 activation process.

Mechanism of Hydroboration of CO2 Using an Fe Catalyst: What Controls the Reactivity and Product Selectivity?

Using a combination of density functional theory (DFT) and ab initio complete active space self-consistent field (CASSCF) calculations, various elementary steps in the mechanism of the reductive hydroboration of CO₂ to two-electron-reduced boryl formate, four-electron-reduced bis(boryl)acetal, and six-electron-reduced methoxy borane by the [Fe(H)₂(dmpe)₂] catalyst were established. The replacement of hydride by oxygen ligation after the boryl formate insertion step is the rate-determining step. Our work unveils, for the first time, (i) how a substrate steers product selectivity in this reaction and (ii) the importance of configurational mixing in contracting the kinetic barrier heights. Based on the reaction mechanism established, we have further focused on the effect of other metals, such as Mn and Co, on rate-determining steps and on catalyst regeneration.

Photocatalytic nitrogen fixation under an ambient atmosphere using a porous coordination polymer with bridging dinitrogen anions

The design of highly electron-active and stable heterogeneous catalysts for the ambient nitrogen reduction reaction is challenging due to the inertness of the N₂ molecule. Here, we report the synthesis of a zinc-based coordination polymer that features bridging dinitrogen anionic ligands, {[Zn(L)(N₂)_0.5(TCNQ-TCNQ)_0.5]·(TCNQ)_0.5}_n (L is tetra(isoquinolin-6-yl)tetrathiafulvalene and TCNQ is tetracyanoquinodimethane), and show that it is an efficient photocatalyst for nitrogen fixation under an ambient atmosphere. It exhibits an ammonia conversion rate of 140 μmol g^-1 h^-1 and functions well also with unpurified air as the feeding gas. Experimental and theoretical studies show that the active [Zn²⁺-(N≡N)^--Zn²⁺] sites can promote the formation of NH₃ and the detachment of the NH₃ formed creates unsaturated [Zn²⁺···Zn⁺] intermediates, which in turn can be refilled by external N₂ sequestration and fast intermolecular electron migration. The [Zn²⁺···Zn⁺] intermediates stabilized by the sandwiched cage-like donor-acceptor-donor framework can sustain continuous catalytic cycles. This work presents an example of a molecular active site embedded within a coordination polymer for nitrogen fixation under mild conditions.

Interplay between β-Diimino and β-Diketiminato Ligands in Nickel Complexes Active in the Proton Reduction Reaction

Two Ni complexes are reported with κ⁴-P₂N₂ β-diimino (BDI) ligands with the general formula [Ni(XBDI)](BF₄)₂, where BDI is N-(2-(diphenylphosphaneyl)ethyl)-4-((2-(diphenylphosphaneyl)ethyl)imino)pent-2-en-2-amine and X indicates the substituent in the α-carbon intradiimine position, X = H for 1(BF₄)₂ and X = Ph for 2(BF₄)₂. Electrochemical analysis together with UV-vis and NMR spectroscopy in acetonitrile and dimethylformamide (DMF) indicates the conversion of the β-diimino complexes 1²⁺ and 2²⁺ to the negatively charged β-diketiminato (BDK) analogues (1-H)⁺ and (2-H)⁺ via deprotonation in DMF. Moreover, further electrochemical and spectroscopy evidence indicates that the one-electron-reduced derivatives 1⁺ and 2⁺ can also rapidly evolve to the BDK (1-H)⁺ and (2-H)⁺, respectively, via hydrogen gas evolution through a bimolecular homolytic pathway. Finally, both complexes are demonstrated to be active for the proton reduction reaction in DMF at E_app = -1.8 V vs Fc^+/0, being the active species the one-electron-reduced derivative 1-H and 2-H.

A trust-region augmented Hessian implementation for state-specific and state-averaged CASSCF wave functions

In this work, we present a one-step second-order converger for state-specific (SS) and state-averaged (SA) complete active space self-consistent field (CASSCF) wave functions. Robust convergence is achieved through step restrictions using a trust-region augmented Hessian (TRAH) algorithm. To avoid numerical instabilities, an exponential parameterization of variational configuration parameters is employed, which works with a nonredundant orthogonal complement basis. This is a common approach for SS-CASSCF and is extended to SA-CASSCF wave functions in this work. Our implementation is integral direct and based on intermediates that are formulated in either the sparse atomic-orbital or small active molecular-orbital basis. Thus, it benefits from a combination with efficient integral decomposition techniques, such as the resolution-of-the-identity or the chain-of-spheres for exchange approximations. This facilitates calculations on large molecules, such as a Ni(II) complex with 231 atoms and 5154 basis functions. The runtime performance of TRAH-CASSCF is competitive with the other state-of-the-art implementations of approximate and full second-order algorithms. In comparison with a sophisticated first-order converger, TRAH-CASSCF calculations usually take more iterations to reach convergence and, thus, have longer runtimes. However, TRAH-CASSCF calculations still converge reliably to a true minimum even if the first-order algorithm fails.

Covalent Organic Framework Based Functional Materials: Important Catalysts for Efficient CO2 Utilization

As hot topics in the chemical conversion of CO₂ , the photo-/electrocatalytic reduction of CO₂ and use of CO₂ as a supporter for energy storage have shown great potential for the utilization of CO₂ . However, many obstacles still exist on the road to realizing highly efficient chemical CO₂ conversion, such as inefficient uptake/activation of CO₂ and mass transport in catalysts. Covalent organic frameworks (COFs), as a kind of porous material, have been widely explored as catalysts for the chemical conversion of CO₂ owing to their unique features. In particular, COF-based functional materials containing diverse active sites (such as single metal sites, metal nanoparticles, and metal oxides) offer great potential for realizing CO₂ conversion and energy storage. This Minireview discusses recent breakthroughs in the basic knowledge, mechanisms, and pathways of chemical CO₂ conversion strategies that use COF-based functional catalysts. In addition, the challenges and prospects of COF-based functional catalysts for the efficient utilization of CO₂ are also introduced.

Selective oxygenation of C-H and CC bonds with H2O2 by high-spin cobalt(II)-carboxylate complexes

Four cobalt(II)-carboxylate complexes [(6-Me₃-TPA)Co^II(benzoate)](BPh₄) (1), [(6-Me₃-TPA)Co^II(benzilate)](ClO₄) (2), [(6-Me₃-TPA)Co^II(mandelate)](BPh₄) (3), and [(6-Me₃-TPA)Co^II(MPA)](BPh₄) (4) (HMPA = 2-methoxy-2-phenylacetic acid) of the 6-Me₃-TPA (tris((6-methylpyridin-2-yl)methyl)amine) ligand were isolated to investigate their ability in H₂O₂-dependent selective oxygenation of C-H and CC bonds. All six-coordinate complexes contain a high-spin cobalt(II) center. While the cobalt(II) complexes are inert toward dioxygen, each of these complexes reacts readily with hydrogen peroxide to form a diamagnetic cobalt(III) species, which decays with time leading to the oxidation of the methyl groups on the pyridine rings of the supporting ligand. Intramolecular ligand oxidation by the cobalt-based oxidant is partially inhibited in the presence of external substrates, and the substrates are converted to their corresponding oxidized products. Kinetic studies and labelling experiments indicate the involvement of a metal-based oxidant in affecting the chemo- and stereo-selective catalytic oxygenation of aliphatic C-H bonds and epoxidation of alkenes. An electrophilic cobalt-oxygen species that exhibits a kinetic isotope effect (KIE) value of 5.3 in toluene oxidation by 1 is proposed as the active oxidant. Among the complexes, the cobalt(II)-benzoate (1) and cobalt(II)-MPA (4) complexes display better catalytic activity compared to their α-hydroxy analogues (2 and 3). Catalytic studies with the cobalt(II)-acetonitrile complex [(6-Me₃-TPA)Co^II(CH₃CN)₂](ClO₄)₂ (5) in the presence and absence of externally added benzoate support the role of the carboxylate co-ligand in oxidation reactions. The proposed catalytic reaction involves a carboxylate-bridged dicobalt complex in the activation of H₂O₂ followed by the oxidation of substrates by a metal-based oxidant.

Non-redox reactivity of V(ii) and Fe(ii) formamidinates towards CO2 resulting in the formation of novel M(ii) carbamates

Multiple CO2 insertions into the M–N bonds of V(ii) and Fe(ii) bis(formamidinates) led to the isolation of three novel carbamates. The CO2 insertion effectivity depended on the solvent used and the metal centre's coordination sphere geometry.

Transition Metal Complexes as Catalysts for the Electroconversion of CO2 : An Organometallic Perspective

The electrocatalytic transformation of carbon dioxide has been a topic of interest in the field of CO2 utilization for a long time. Recently, the area has seen increasing dynamics as an alternative strategy to catalytic hydrogenation for CO2 reduction. While many studies focus on the direct electron transfer to the CO2 molecule at the electrode material, molecular transition metal complexes in solution offer the possibility to act as catalysts for the electron transfer. C1 compounds such as carbon monoxide, formate, and methanol are often targeted as the main products, but more elaborate transformations are also possible within the coordination sphere of the metal center. This perspective article will cover selected examples to illustrate and categorize the currently favored mechanisms for the electrochemically induced transformation of CO2 promoted by homogeneous transition metal complexes. The insights will be corroborated with the concepts and elementary steps of organometallic catalysis to derive potential strategies to broaden the molecular diversity of possible products.

Bimetallic, Silylene-Mediated Multielectron Reductions of Carbon Dioxide and Ethylene

A metal/ligand cooperative approach to the reduction of small molecules by metal silylene complexes (R₂ Si=M) is demonstrated, whereby silicon activates the incoming substrate and mediates net two-electron transformations by one-electron redox processes at two metal centers. An appropriately tuned cationic pincer cobalt(I) complex, featuring a central silylene donor, reacts with CO₂ to afford a bimetallic siloxane, featuring two Co^II centers, with liberation of CO; reaction of the silylene complex with ethylene yields a similar bimetallic product with an ethylene bridge. Experimental and computational studies suggest a plausible mechanism proceeding by [2+2] cycloaddition to the silylene complex, which is quite sensitive to the steric environment. The Co^II /Co^II products are reactive to oxidation and reduction. Taken together, these findings demonstrate a strategy for metal/ligand cooperative small-molecule activation that is well-suited to 3d metals.

Targeted synthesis of a CrIII–O–VV core oxo-bridged complex: spectroscopic, magnetic and electrical properties

The results of vibrational, electronic, structural, thermal, magnetic and impedance spectroscopy studies are presented in the first reported compound with a Cr^III–O–V^V bridge.

Reactivity of a T-shaped cobalt(I) pincer-complex

The reactivity of a paramagnetic T-shaped cobalt(i) complex, [(iPrboxmi)Co], stabilised by a monoanionic bis(oxazolinylmethylidene)-isoindolate (boxmi) NNN pincer ligand is described. The exposure to carbon monoxide as an additional neutral ligand resulted in the square-planar species [(iPrboxmi)Co(CO)], accompanied by a change in the electronic spin state from S = 1 to S = 0. In contrast, upon treatment with trimethylphosphine the formation of the distorted tetrahedral complex [(iPrboxmi)Co(PMe3)] was observed (S = 1). Reacting [(iPrboxmi)Co] with iodine (I2), organic peroxides (tBu2O2, (SiMe3)2O2) and diphenyldisulphide (Ph2S2) yielded the tetracoordinated complexes [(iPrboxmi)CoI], [(iPrboxmi)Co(OtBu)], [(iPrboxmi)Co(OSiMe3)] and [(iPrboxmi)Co(SPh)], respectively, demonstrating the capability of the boxmi-supported cobalt(i) complex to homolytically cleave bonds and thus its distinct one-electron reactivity. Furthermore, a square-planar cobalt(ii) alkynyl complex [(iPrboxmi)Co(CCArF)] was identified as the main product in the reaction between [(iPrboxmi)Co] and a terminal alkyne, 4-fluoro-1-ethynylbenzene. Putting such species in the context of the previously investigated hydroboration catalysis, its stoichiometric reaction with pinacolborane revealed its potential conversion into a cobalt(ii) hydride complex, thus confirming its original attribution as off-cycle species.

Reaction Pathways and Redox States in α-Selective Cobalt-Catalyzed Hydroborations of Alkynes

Cobalt(II) alkyl complexes supported by a monoanionic NNN pincer ligand are pre‐catalysts for the regioselective hydroboration of terminal alkynes, yielding the Markovnikov products with α:β‐(E) ratios of up to 97:3. A cobalt(II) hydride and a cobalt(II) vinyl complex appear to determine the main reaction pathway. In a background reaction the highly reactive hydrido species specifically converts to a coordinatively unsaturated cobalt(I) complex which was found to re‐enter the main catalytic cycle.

The Molpro quantum chemistry package

Molpro is a general purpose quantum chemistry software package with a long development history. It was originally focused on accurate wavefunction calculations for small molecules but now has many additional distinctive capabilities that include, inter alia, local correlation approximations combined with explicit correlation, highly efficient implementations of single-reference correlation methods, robust and efficient multireference methods for large molecules, projection embedding, and anharmonic vibrational spectra. In addition to conventional input-file specification of calculations, Molpro calculations can now be specified and analyzed via a new graphical user interface and through a Python framework.

Computational mechanistic insights into non-noble-metal-catalysed CO2 conversion

The conversion of CO2 into liquid fuels and value-added fine chemicals is of significant interest for both the environment and the global energy demand. In this frontier article, we highlight viable methods for transforming CO2 into valuable C1 feedstocks and summarize the key mechanistic aspects obtained by in-depth computational investigations of three important pathways of two-electron CO2 reduction: (i) CO2 dissociation to CO (ii) CO2 dimerization to CO32- and CO, and (iii) CO2 hydrogenation to formate. Lastly, we present our outlook on how theoretically obtained mechanistic insights could be translated into strategies for designing efficient non-noble-metal catalysts for CO2 reduction.

CO2 fixation and transformation on a thiolate-bridged dicobalt scaffold under oxidising conditions

CO2 fixation and conversion promoted by a thiolate-bridged dicobalt complex in the presence of an oxidant.

Low-coordinate first-row transition metal complexes in catalysis and small molecule activation

In this Perspective, we will highlight selected examples of transition metal complexes with low coordination numbers whose high reactivity has been exploited in catalysis and the activation of small molecules featuring strong bonds (N₂, CO₂, and CO).