Hetero-metallic active sites coupled with strongly reductive polyoxometalate for selective photocatalytic CO2-to-CH4 conversion in water

Dual-nodes bridged cobalt-modified Keggin-type polyoxometalate-based chains for highly efficient CO2 photoconversion

The design of efficient catalysts for photocatalytic CO2 conversion is of great importance for the sustainable development of society. Herein, three polyoxometalate (POM)-based crystalline materials were formulated prepared by substituting transition metals and adjusting solvent acidity with 2-(2-pyridyl) benzimidazole (pyim) as the light-trapping ligand, namely {[SiW12O40][Co(pyim)2]2}·2C2H5OH (SiW12Co2), {[SiW12O40][Ni(pyim)2]2}·2C2H5OH (SiW12Ni2), and {[SiW12O40][Mn(pyim)2]2}·2C2H5OH (SiW12Mn2). X-ray crystallography diffraction analysis indicates that the three complexes exhibit isostructural properties, and form a stable one-dimensional chain structure stabilized by two [M(pyim)2]22+ (M = Co, Ni, and Mn) fragments serving as dual-nodes to the adjacent SiW12 units. A comprehensive analysis of the structural characterization and photocatalytic CO2 reduction properties is presented. Under light irradiation, SiW12Co2 exhibited a remarkable CO generation rate of 10 733 μmol g-1 h-1 with a turnover number of 328, outperforming most of the reported heterogeneous POM-based photocatalysts. Besides, cycling tests revealed that SiW12Co2 is an efficient and stable photocatalyst with great recyclability for at least four successive runs. This study proves that the successful incorporation of diverse transition metals into the POM anion could facilitate the development of highly efficient photocatalysts for the CO2RR.

Post-synthetic Metalation on the Ionic TiO2 Surface to Enhance Metal-CO2 Interaction During Photochemical CO2 Reduction

During the photochemical CO2 reduction reaction, CO2 adsorption on the catalyst's surface is a crucial step where the binding mode of the [metal-CO2] adduct directs the product selectivity and efficiency. Herein, an ionic TiO2 nanostructure stabilized by polyoxometalates (POM), ([POM]x@TiO2), is prepared and the sodium counter ions present on the surface to balance the POMs' charge are replaced with copper(II) ions, (Cux[POM]@TiO2). The microscopic and spectroscopic studies affirm the copper exchange without altering the TiO2 core and weak coordination of copper (II) ions to the POMs' surface. Band structure analysis suggests the photo-harvesting efficiency of the TiO2 core with the conduction band edge higher than the reduction potential of CuII/I and multi-electron CO2 reduction potentials. Photochemical CO2 reduction with Cux[POM]@TiO2 results in 30 μmol gcat. -1 CO (79 %) and 8 μmol gcat -1 of CH4 (21 %). Quasi-in-situ Raman study provides evidence in support of CO2 adsorption on the Cux[POM]@TiO2 surface. 13C and D2O labeling studies affirm the {Cu-[CO2]-} adduct formation. Despite the photo-harvesting ability of Nax[POM]@TiO2 itself, the poor CO2 adsorption ability of sodium ions highlights the crucial role of copper ion CO2 photo-reduction. Characterization of the {M-[η2-CO2]-} species via surface tuning validates the CO2 activation and photochemical reduction pathway proposed earlier.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 μL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

{Mo4}-directed structural evolution of highly reduced molybdenum red clusters for efficient proton conduction

A series of highly reduced Mo red clusters {Mo28} (1), {Mo30} (2), and {Mo40} (3) are synthesized from the rational assembly of planar {MoV4} building blocks and employed for proton conduction. 3 exhibits the best conductivity of 7.56 × 10-3 S cm-1 under optimal conditions due to the most efficient hydrogen-bonding network.

Nanostructured Polyoxometalate-Based Heterogeneous Electrode Materials for Electrochemical Sensing of Glucose

We exploited a tactic to obtain a low-cost, high-efficiency, pollution-free, and stable nonenzymatic polyoxometalate-based heterogeneous electrode material for electrochemical sensing of glucose. It is first followed by the countercation exchange of K2Na8[Cu4(H2O)2(PW9O34)2] (CuPOM) using cesium chloride to prepare an insoluble CuPOM (Cs-CuPOM), which exhibits a uniform and perfect claviform shape with smooth surface. Further, it was mixed with graphite powder to prepare Cs-CuPOM-modified carbon paste electrode (Cs-CuPOM/CPE) with the Cs-CuPOM content between 15% and 50% in weight. This obtained electrode material Cs-CuPOM shows a better electrochemical sensor activity than Cs-MnPOM, Cs-FePOM, and other reported POM-based electrode materials for glucose oxidation on account of their quicker electron transfer kinetics, which also exhibits conspicuous characteristics with a wide linear range of 5-1500 μM. It also possesses a high sensitivity of 16.3 A M-1 cm-2 and a low limit of detection (LOD) of 0.99 × 10-6 M at the signal-to-noise ratio of 3. The conspicuous sensing feature, low cost, and liable synthetic method can make Cs-CuPOM a promising candidate for the exploitation of a preeminent glucose sensor.

Hourglass shaped polyoxometalate-based materials as electrochemical sensors for the detection of trace Cr(VI) in a wide pH range

Due to Chromium hexavalent Cr(VI) is one of the most carcinogenic toxic ions, it is essential for finding a low-cost, efficient and highly selective detection method. Considering the wide range of pH detection in water, a major issue is exploring high sensitive electrocatalyst. Thus, two crystalline materials with hourglass {P₄Mo₆} clusters in different metal centers were synthesized and had fabulous Cr(VI) detection performance in a wide pH range. At pH = 0, the sensitivities of CUST-572 and CUST-573 were 133.89 μA μM^-1 and 30.05 μA μM^-1, and the detection limits (LODs) of Cr(VI) were 26.81 nM and 50.63 nM which met World Health Organization (WHO) standard for drinking water. CUST-572 and CUST-573 also had good detection performance at pH = 1-4. In actual water samples, CUST-572 and CUST-573 also possessed sensitivities of 94.79 μA μM^-1 and 20.09 μA μM^-1 and LODs were 28.25 nM and 52.24 nM, showing high selectivity and chemical stability. The difference of the detection performance of CUST-572 and CUST-573 were mainly attributed to the interaction between {P₄Mo₆} and different metal centers of crystalline materials. In this work, electrochemical sensors for Cr(VI) detection in a wide pH range were explored, providing important guidance for the design of efficient electrochemical sensors for ultra-trace detection of heavy metal ions in practical environments.

Applications of Viologens in Organic and Inorganic Discoloration Materials

Viologen derived from 4,4'-bipyridine has attracted much attention because of its color changing properties with electron transfer, unique redox stability and structural diversity. These characteristics have led to its successful use in various applications, in particular in color-changing materials. In the past few years, researchers have been working on the syntheses of viologen-based color-changing functional materials, and such materials have been widely used in many fields. In photochromic materials, it is used as anti-counterfeiting material; in thermochromic, it is used as memory storage material, and in electrochromic, it is used as a battery material. This Review discusses the progress of viologen in organic and inorganic discoloration materials in recent years. The syntheses of viologen and its derivatives are summarized, and its application in the field of discoloration materials is introduced.

A Polyniobotungstate-Based Hybrid for Visible-Light-Induced Phosphorylation of N-Aryl-Tetrahydroisoquinoline

A new organic-inorganic hybrid based on a Nb/W mixed-addendum polyoxometalate with the formula H₁₄[(Co(H₂O)₃)₂(C₁₀H₈N₂)₄(P₄W₃₀Nb₆O₁₂₃)]·4(C₁₀H₈N₂)·8H₂O (Co-POM) has been synthesized by the solvothermal method and characterized by single-crystal X-ray diffraction (XRD), powder X-ray diffraction (PXRD), elemental analysis, FTIR spectroscopy, UV-vis absorption spectrum, and thermogravimetric analysis (TGA). Importantly, visible-light-absorption peaks around 525 nm for Co-POM indicated that this material should have potential in visible-light-induced organic reactions. Herein, we disclosed visible-light-promoted phosphorylation of N-aryl-tetrahydroisoquinoline using Co-POM as an efficient heterogeneous photocatalyst. In this procedure, diverse phosphorus reagents are compatible at room temperature and in an O₂ atmosphere, giving the corresponding products in good to excellent yields (up to 97%). Simultaneously, this heterogeneous photocatalyst can be recycled up to ten times with a negligible decrease in yield, showing outstanding sustainability and recyclability.

In Situ Construction of MIL-100@NiMn-LDH Hierarchical Architectures for Highly Selective Photoreduction of CO2 to CH4

Layered double hydroxides (LDHs) are considered a promising catalyst for photocatalytic CO₂ reduction due to their broad photoresponse, facile channels for electron transfer, and the presence of abundant defects. Herein, we reported for the first time the fabrication of a novel photocatalyst MIL-100@NiMn-LDH with a hierarchical architecture by selecting MIL-100 (Mn) as a template to provide Mn³⁺ for the in situ growth of ultrathin NiMn-LDH nanosheets. Moreover, the in situ growth strategy exhibited excellent universality toward constructing MIL-100@LDH hierarchical architectures. When applied in the photocatalytic CO₂ reduction reaction, the as-prepared MIL-100@NiMn-LDH exhibited excellent CH₄ selectivity of 88.8% (2.84 μmol h^-1), while the selectivity of H₂ was reduced to 1.8% under visible light irradiation (λ > 500 nm). Such excellent catalytic performance can be attributed to the fact that (a) the MIL-100@NiMn-LDH hierarchical architectures with exposed catalytic active sites helped to enhance the CO₂ adsorption and activation and (b) the presence of rich oxygen vacancies and coordinately unsaturated metal sites in MIL-100@NiMn-LDH that optimized the band gap and accelerated the separation/transport of photoinduced charges.

Efficient water splitting over a hybrid photocatalyst with (002) active facet and heterostructure

A series of P-CdS@P-MWOx (M = Ni, Mn, Co, Zn, Fe, Cu) hybrid photocatalysts was constructed by using different transition-metal polyoxometalates [SiW11M(H2O)O39]n- as precursor via pyrolysis-phosphidation strategy. Under visible light...

Efficient visible-light-driven reduction of hexavalent chromium catalyzed by conjugated organic species modified hourglass-type phosphomolybdate hybrids

Four conjugated-organic-species modified hourglass-type phosphomolybdate hybrids with a 0-D + 1-D → 3-D supramolecular structure exhibited favorable photocatalytic activity and stability towards Cr(vi) reduction.

The Intrinsic Charge Carrier Behaviors and Applications of Polyoxometalate Clusters Based Materials

Polyoxometalates (POMs) are a series of molecular metal oxide clusters, which span the two domains of solutes and solid metal oxides. The unique characters of POMs in structure, geometry, and adjustable redox properties have attracted widespread attention in functional material synthesis, catalysis, electronic devices, and electrochemical energy storage and conversion. This review is focused on the links between the intrinsic charge carrier behaviors of POMs from a chemistry-oriented view and their recent ground-breaking developments in related areas. First, the advantageous charge transfer behaviors of POMs in molecular-level electronic devices are summarized. Solar-driven, thermal-driven, and electrochemical-driven charge carrier behaviors of POMs in energy generation, conversion and storage systems are also discussed. Finally, present challenges and fundamental insights are discussed as to the advanced design of functional systems based upon POM building blocks for their possible emerging application areas.

Reticular-Chemistry-Inspired Supramolecule Design as a Tool to Achieve Efficient Photocatalysts for CO2 Reduction

Photocatalytic CO₂ reduction into C1 products is one of the most trending research subjects of current times as sustainable energy generation is the utmost need of the hour. In this review, we have tried to comprehensively summarize the potential of supramolecule-based photocatalysts for CO₂ reduction into C1 compounds. At the outset, we have thrown light on the inert nature of gaseous CO₂ and the various challenges researchers are facing in its reduction. The evolution of photocatalysts used for CO₂ reduction, from heterogeneous catalysis to supramolecule-based molecular catalysis, and subsequent semiconductor-supramolecule hybrid catalysis has been thoroughly discussed. Since CO₂ is thermodynamically a very stable molecule, a huge reduction potential is required to undergo its one- or multielectron reduction. For this reason, various supramolecule photocatalysts were designed involving a photosensitizer unit and a catalyst unit connected by a linker. Later on, solid semiconductor support was also introduced in this supramolecule system to achieve enhanced durability, structural compactness, enhanced charge mobility, and extra overpotential for CO₂ reduction. Reticular chemistry is seen to play a pivotal role as it allows bringing all of the positive features together from various components of this hybrid semiconductor-supramolecule photocatalyst system. Thus, here in this review, we have discussed the selection and role of various components, viz. the photosensitizer component, the catalyst component, the linker, the semiconductor support, the anchoring ligands, and the peripheral ligands for the design of highly performing CO₂ reduction photocatalysts. The selection and role of various sacrificial electron donors have also been highlighted. This review is aimed to help researchers reach an understanding that may translate into the development of excellent CO₂ reduction photocatalysts that are operational under visible light and possess superior activity, efficiency, and selectivity.

Design of Crystalline Reduction-Oxidation Cluster-Based Catalysts for Artificial Photosynthesis

Metal cluster-based compounds have difficulty finishing the photocatalytic carbon dioxide reduction reaction (CO₂RR) and water oxidation reaction (WOR) simultaneously because of the big challenge in realizing the coexistence of independently and synergistically reductive and oxidative active sites in one compound. Herein, we elaborately designed and synthesized one kind of crystalline reduction-oxidation (RO) cluster-based catalysts connecting reductive {M ₃ L ₈ (H ₂ O) ₂ } (M = Zn, Co, and Ni for RO-1, 2, 3 respectively) cluster and oxidative {PMo₉V₇O₄₄} cluster through a single oxygen atom bridge to achieve artificial photosynthesis successfully. These clusters can all photocatalyze CO₂-to-CO and H₂O-to-O₂ reactions simultaneously, of which the CO yield of RO-1 is 13.8 μmol/g·h, and the selectivity is nearly 100%. Density functional theory calculations reveal that the concomitantly catalytically reductive and oxidative active sites (for CO₂RR and WOR, respectively) and the effective electron transfer between the sites in these RO photocatalysts are the key factors to complete the overall photosynthesis.

A Purely Inorganic Quasi-Keggin Polyoxometalate for Photocatalytic Conversion of Carbon Dioxide to Carbon Monoxide

A pure inorganic cluster, H₄₇ Na₂ Co₄ Mo₂₄ (PO₄ )₁₁ O₇₂  ⋅ 15H₂ O (denoted as {Co₄ Mo₂₄ }), has been successfully synthesized by hydrothermal method. Notably, the assembly of a central {Co₂ PO₄ } tetrahedron and four peripheral {Co[P₄ Mo₆ ]} fragments gives rise to a rare "quasi-Keggin" structure of {Co₄ Mo₂₄ }, in which Co linkers continue to bridge adjacent substructures, resulting in the generation of 3D framework with large cavities. Benefitting from the combination of strong reductive {P₄ Mo₆ } units and Co active centers, the photocatalytic system with {Co₄ Mo₂₄ } as heterogeneous catalyst exhibits excellent activity for CO₂ conversion to CO, offering the CO formation rate of 1848.3 μmol g^-1 h^-1 with high selectivity of 97.0 %. Besides, thermogravimetric and X-ray diffraction analysis confirm that {Co₄ Mo₂₄ } can maintain stable during the photocatalytic reaction process.

Organic Moiety-Regulated Photocatalytic Performance of Phosphomolybdate Hybrids for Hexavalent Chromium Reduction

Visible-light-driven photocatalytic Cr(VI) reduction is a promising pathway to moderate environmental pollution, in which the development of photocatalysts is pivotal. Herein, three hourglass-type phosphomolybdate-based hybrids with the formula of: (H₂ bpe)₃ [Zn(H₂ PO₄ )][Zn(bpe)(H₂ O)₂ ]H{Zn[P₄ Mo₆ O₃₁ H₆ ]₂ } ⋅ 6H₂ O (1) Na₆ [H₂ bz]₂ [ZnNa₄ (H₂ O)₅ ]{Zn [P₄ Mo₆ O₃₁ H₃ ]₂ } ⋅ 2H₂ O (2) and (H₂ mbpy) {[Zn(mbpy)(H₂ O)]₂ [Zn(H₂ O)]₂ }{Zn[P₄ Mo₆ O₃₁ H₆ ]₂ } ⋅ 10H₂ O (3) (bpe=trans-1,2-bi(4-pyridyl)-ethylene; bz=4,4'-diaminobiphenyl; mbpy=4,4'-dimethyl-2,2'bipyridine) were synthesized under the guidance of the functional organic moiety modification strategy. Structural analysis showed that hybrids 1-3 have similar 2D layer-like spatial arrangements constructed by {Zn[P₄ Mo₆ ]₂ } clusters and organic components with different conjugated degree. With excellent redox properties and wide visible-light absorption capacities, hybrids 1-3 display favourable photocatalytic activity for Cr(VI) reduction with 79%, 70% and 64% reduction rates, which are superior to that of only inorganic {Zn[P₄ Mo₆ ]₂ } itself (21%). The investigation of organic components on photocatalytic performance of hybrids 1-3 suggested that the organic counter cations (bpe, bz and mbpy) can effectively affect the visible-light absorption, as well as the recombination of photogenerated carriers stemmed from {Zn[P₄ Mo₆ ]₂ } clusters, further promoting their photocatalytic performances towards Cr(VI) reduction. This work provides an experimental basis for the design of functionalized photocatalysts via the modification of organic species.

Extending photocatalysis to the visible and NIR: the molecular strategy

Photocatalysis exploits light to perform important processes as solar fuel production by water splitting, and CO2 reduction or water and air decontamination. Therefore, photocatalysis contributes to the satisfaction of the increasing needs for clean energy, environmental remediation and, most recently, sanification. Most of the efficient semiconductor nanoparticles (NP), developed as photocatalysts, work in the ultraviolet (UV) spectral region and they are not able to exploit either visible (Vis) or near infrared (NIR) radiation. This limitation makes them unable to fully exploit the broad band solar radiaton or to be applied in indoor conditions. Recently, different approaches have been developed to extend the spectral activity of semiconductor NP, like for example band-gap engineering, integration with upconversion NP and plasmonic enhancement involving also hot-electron injection. Nevertheless, the use of organic molecules and metal complexes, for enhancing the photoactivity in the Vis and NIR, was one of the first strategies proposed for sensitization and it is still one of the most efficient. In this minireview we highlight and critically discuss the most recent and relevant achievements in the field of photocatalysis obtained by exploiting dye sensitization either via dynamic or static quenching.

Selective photocatalytic production of CH4 using Zn-based polyoxometalate as a nonconventional CO2 reduction catalyst

Efficient and selective production of CH₄ through the CO₂ reduction reaction (CO2RR) is a challenging task due to the high amount of energy consumption and various reaction pathways. Here, we report the synthesis of Zn-based polyoxometalate (ZnPOM) and its application in the photocatalytic CO2RR. Unlike conventional Zn-based catalysts that produce CO, ZnPOM can selectively catalyze the production of CH₄ in the presence of an Ir-based photosensitizer (TIr3) through the photocatalytic CO2RR. Photophysical and computation analyses suggest that selective photocatalytic production of CH₄ using ZnPOM and TIr3 can be attributed to (1) the exceptionally fast transfer of photogenerated electrons from TIr3 to ZnPOM through the strong molecular interactions between them and (2) effective transfer of electrons from ZnPOM to *CO intermediates due to significant hybridization of their molecular orbitals. This study provides insights into the design of novel CO2RR catalysts for CH₄ production beyond the limitations in conventional studies that focus on Cu-based materials.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.

Defect engineering of NiCo-layered double hydroxide hollow nanocages for highly selective photoreduction of CO2 to CH4 with suppressing H2 evolution

We found that abundant defects could be created in the HC-NiCo-LDH by constructing a hollow nanocage morphology. The HC-NiCo-LDH showed excellent CO₂ photoreduction performance that increasing the CH₄ selectivity while suppressing the H₂ evolution.

Two three-dimensional polyanionic clusters [M(P4Mo6)2] (M = Co, Zn) exhibiting excellent photocatalytic CO2 reduction performance

Two captivating {P4Mo6}-based compounds, formulated as (H2bbi)2{[Co2(bbi)][Co2.33(H2O)4][H9.33CoP8Mo12O62]}·4H2O (1) and (H2bbi){[Zn(Hbbi)]2[Zn0.75(bbi)][K2Zn(H2O)4][H8.5ZnP8Mo12O62]} (2) [bbi = 1,1'-(1,4-butanediyl)bis(imidazole)], were successfully synthesized under hydrothermal conditions. Structural analysis demonstrates that compounds 1 and 2 are constructed from hourglass-shaped structures [M(P4Mo6O31)2]n- (M = Co, Zn), which are all made up of molybdophosphates and one transition metal ion as the central connecting node. Compounds 1 and 2 feature three-dimensional (3D) frameworks, which are all connected to form a 3D structure by metal ions and bbi ligands. More interestingly, compound 1 exhibits higher catalytic activity than 2 in CO2 photoreduction due to the suitable energy band structure of Co species in {P4Mo6} clusters. The CO yield was 3261 μmol g-1 with high selectivity in 8 h for compound 1 in photocatalytic CO2 reduction, which is highly promising in the photocatalytic field. Additionally, the photoluminescence properties of 2 were investigated.

Three-Dimensional Interpenetrating Frameworks Based on {P4Mo6} Tetrameric Clusters and Filled with In Situ Generated Alkyl Viologens

Four novel three-dimensional interpenetrating frameworks based on {P₄Mo₆} units, H[C₁₂H₁₄N₂]₄[TM₄(PO₄)(H₂O)₄Na₆][TM₂(Mo₆O₁₂(HPO₄)₃(PO₄)(OH)₃)₄]·8H₂O (1, 2) and H[C₁₄H₁₈N₂]₄[TM₄(PO₄)(H₂O)₄Na₆][TM₂(Mo₆O₁₂(HPO₄)₃(PO₄)(OH)₃)₄]·8H₂O (3, 4) (TM = Co²⁺ (1, 3), Mn²⁺ (2, 4)) were synthesized and characterized using infrared spectroscopy, elemental analyses, thermogravimetric analysis, and single-crystal X-ray diffraction. In situ generated methyl viologen (compounds 1 and 2) or ethyl viologen (compounds 3 and 4) cations function as templates to induce the generation of 2-fold interpenetrating structures in which the {P₄Mo₆} tetrameric clusters with [TM₄(PO₄)Na₆] (TM = Co²⁺ (1, 3) and Mn²⁺ (2, 4)) as the core were bridged by transition metal ions. Compounds 1-4 possess high thermal stabilities and the decomposition temperature of the inorganic frameworks were all >500 °C. It is worth noting that the four compounds all exhibited the bifunctional catalytic performance that they not only had an excellent photocatalytic activity for the reduction of hexavalent chromium (Cr(VI)) under visible light irradiation but also showed a good electrocatalytic activity for the reduction reaction of hydrogen peroxide.

Co-immobilization of a Rh Catalyst and a Keggin Polyoxometalate in the UiO-67 Zr-Based Metal-Organic Framework: In Depth Structural Characterization and Photocatalytic Properties for CO2 Reduction

The Keggin-type polyoxometalate (POM) PW₁₂O₄₀^3- and the catalytic complex Cp*Rh(bpydc)Cl₂ (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, ³¹P and ¹³C MAS NMR, N₂ adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW₁₂,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. ³¹P-¹H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW₁₂,Cp*Rh)@UiO-67 composite for CO₂ reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.

Polyoxometalate-based crystalline materials as a highly sensitive electrochemical sensor for detecting trace Cr(vi)

It is crucial to find a convenient and sensitive method for quantitative determination of heavy metal chromium(vi) ions. Developing crystalline materials coupled with polyoxometalates as an electrochemical sensor is a promising approach to address the above issues. Here we reported two reductive polyoxometalate-based crystalline compounds with the formula of (H2bpp)2[Na4Fe(H2O)7][Fe(P4Mo6O31H6)2]·2H2O (1) and (H2bpp)6(bpp)2[Fe(P4Mo6O31H8)2]2·13H2O (2) (bpp = 1,3-bi(4-pyridyl)propane). Structural analysis indicated that both two compounds were composed of inorganic polyanionic clusters and organic protonated bpp cations. The difference lies in the arrangement mode of the inorganic moiety: crystal 1 shows a unique three-dimensional (3-D) inorganic porous skeleton, while crystal 2 consists of isolated 0-D polyanionic clusters. When used as electrochemical sensors in the determination of trace Cr(vi), crystal 1 shows a broad linearity range (2-2610 μM) with a low limit of detection (LOD) of 0.174 μM (9 ppb), which is superior to that of compound 2 (a LOD of 0.33 μM) and meets the standard of Cr(vi) in drinking water set by the WHO (less than 0.962 μM or 50 ppb). Importantly, crystal 1 showed benign selectivity to Cr(vi) in the presence of various heavy metal ions and good reproducibility in a real water sample, which prove its strong anti-interference ability. In addition, experimental results showed that the spatial arrangement of polyanionic clusters could affect the final electrochemical behavior of crystalline materials. This work provides some insights into the design of cost-effective POM-based electrochemical sensors at the molecular level.

Pt-Substituted polyoxometalate modification on the surface of low-cost TiO2 with highly efficient H2 evolution performance

In this study, Pt-substituted polyoxometalate was first modified on the surface of commercially available TiO₂, forming an efficient photocatalyst with high reactivity for hydrogen evolution. During the photocatalytic process, Pt-polyoxometalates not only increase the mobility rate of electrons but also improve the separation efficiency of photoinduced electrons and holes. After photoreduction, the in situ generated Pt⁰ species are anchored on the surface of polyoxometalate anion, which prevents further agglomeration. Then, the in situ formed Pt⁰ species and polyoxometalates synergistically promote the efficiency of photoinduced electron transfer from TiO₂ to the protons adsorbed on the Pt⁰ surface. Although the content of Pt⁰ in the nanocomposite is only 0.6%, the photocatalytic hydrogen production rate reaches 5.6 mmol g^-1 h^-1 and remains stable at 4.5 mmol g^-1 h^-1 after the continuous catalytic process. Due to the modification of TiO₂ by Pt-substituted polyoxometalate, this nanocomposite represents a practical model that possesses highly efficient photoelectric conversion performance. The presented work not only extends the family of new TiO₂-polyoxometalate-based materials but also takes a further step toward the practical application of commercial TiO₂ in photocatalytic hydrogen production.

Hourglass-type polyoxometalate-based crystalline materials as efficient cooperating photocatalysts for the reduction of Cr(vi) and oxidation of dyes

Hourglass-type polyoxometalate-based crystalline materials exhibit efficient photocatalytic activities towards simultaneous photocatalytic Cr(vi) reduction and organic MB oxidation.

Polyoxometalate-based room-temperature phosphorescent materials induced by anion–π interactions

A series of polyoxometalate-based host–guest materials emit strong red room-temperature phosphorescence attributed to intermolecular charge-transfer states which was caused by unorthodox anion–π interactions.

Metal-free azo-bridged porphyrin porous organic polymers for visible-light-driven CO2 reduction to CO with high selectivity

Two nitrogen-rich azo-bridged porphyrin porous organic polymers (Azo-Por-Bpy-POP and Azo-Por-Dadp-POP) with high surface areas were prepared by coupling 5,10,15,20-tetra(p-nitrophenyl)-porphyrin with the aromatic amines of 2,2'-bipyridine-5,5'-diamine (Bpy) and diaminodiphenyl (Dadp). Azo-Por-Bpy-POP and Azo-Por-Dadp-POP display high photocatalytic reduction activity for CO2 to CO under visible-light irradiation without a sacrificial reagent or metal co-catalyst. Azo-Por-Bpy-POP exhibits the highest photoreduction for CO2 with CO as the only carbonaceous reduction product with a production rate of 38.75 μmol g-1 h-1. Theoretical investigations indicate a stronger electrostatic interaction between CO2 and Azo-Por-Bpy-POP than Azo-Por-Dadp-POP, which favors CO2 photoreduction.