Modeling the relative dynamics of DNA-coated colloids

Hopping and crawling DNA-coated colloids

Understanding the motion of particles with multivalent ligand-receptors is important for biomedical applications and material design. Yet, even among a single design, the prototypical DNA-coated colloids, seemingly similar micrometric particles hop or roll, depending on the study. We shed light on this problem by observing DNA-coated colloids diffusing near surfaces coated with complementary strands for a wide array of coating designs. We find colloids rapidly switch between 2 modes: They hop-with long and fast steps-and crawl-with short and slow steps. Both modes occur at all temperatures around the melting point and over various designs. The particles become increasingly subdiffusive as temperature decreases, in line with subsequent velocity steps becoming increasingly anticorrelated, corresponding to switchbacks in the trajectories. Overall, crawling (or hopping) phases are more predominant at low (or high) temperatures; crawling is also more efficient at low temperatures than hopping to cover large distances. We rationalize this behavior within a simple model: At lower temperatures, the number of bound strands increases, and detachment of all bonds is unlikely, hence, hopping is prevented and crawling favored. We thus reveal the mechanism behind a common design rule relying on increased strand density for long-range self-assembly: Dense strands on surfaces are required to enable crawling, possibly facilitating particle rearrangements.

Macroscopic photonic single crystals via seeded growth of DNA-coated colloids

Photonic crystals-a class of materials whose optical properties derive from their structure in addition to their composition-can be created by self-assembling particles whose sizes are comparable to the wavelengths of visible light. Proof-of-principle studies have shown that DNA can be used to guide the self-assembly of micrometer-sized colloidal particles into fully programmable crystal structures with photonic properties in the visible spectrum. However, the extremely temperature-sensitive kinetics of micrometer-sized DNA-functionalized particles has frustrated attempts to grow large, monodisperse crystals that are required for photonic metamaterial applications. Here we describe a robust two-step protocol for self-assembling single-domain crystals that contain millions of optical-scale DNA-functionalized particles: Monodisperse crystals are initially assembled in monodisperse droplets made by microfluidics, after which they are grown to macroscopic dimensions via seeded diffusion-limited growth. We demonstrate the generality of our approach by assembling different macroscopic single-domain photonic crystals with metamaterial properties, like structural coloration, that depend on the underlying crystal structure. By circumventing the fundamental kinetic traps intrinsic to crystallization of optical-scale DNA-coated colloids, we eliminate a key barrier to engineering photonic devices from DNA-programmed materials.

Mass Changes the Diffusion Coefficient of Particles with Ligand-Receptor Contacts in the Overdamped Limit

Inertia does not generally affect the long-time diffusion of passive overdamped particles in fluids. Yet a model starting from the Langevin equation predicts a surprising property of particles coated with ligands that bind reversibly to surface receptors: heavy particles diffuse more slowly than light ones of the same size. We show this by simulation and by deriving an analytic formula for the mass-dependent diffusion coefficient in the overdamped limit. We estimate the magnitude of this effect for a range of biophysical ligand-receptor systems, and find it is potentially observable for tailored micronscale DNA-coated colloids.

Sliding across a surface: Particles with fixed and mobile ligands

A quantitative model of the mobility of ligand-presenting particles at the interface is pivotal to understanding important systems in biology and nanotechnology. In this work, we investigate the emerging dynamics of particles featuring ligands that selectively bind receptors decorating an interface. The formation of a ligand-receptor complex leads to a molecular bridge anchoring the particle to the surface. We consider systems with reversible bridges in which ligand-receptor pairs bind/unbind with finite reaction rates. For a given set of bridges, the particle can explore a tiny fraction of the surface as the extensivity of the bridges is finite. We show how, at timescales longer than the bridges' lifetime, the average position of the particle diffuses away from its initial value. We distill our findings into two analytic equations for the sliding diffusion constant of particles carrying mobile and fixed ligands. We quantitatively validate our theoretical predictions using reaction-diffusion simulations. We compare our findings with results from recent literature studies and discuss the molecular parameters that likely affect the particle's mobility most. Our results, along with recent literature studies, will allow inferring the microscopic parameters at play in complex biological systems from experimental trajectories.

Comprehensive view of microscopic interactions between DNA-coated colloids

The self-assembly of DNA-coated colloids into highly-ordered structures offers great promise for advanced optical materials. However, control of disorder, defects, melting, and crystal growth is hindered by the lack of a microscopic understanding of DNA-mediated colloidal interactions. Here we use total internal reflection microscopy to measure in situ the interaction potential between DNA-coated colloids with nanometer resolution and the macroscopic melting behavior. The range and strength of the interaction are measured and linked to key material design parameters, including DNA sequence, polymer length, grafting density, and complementary fraction. We present a first-principles model that screens and combines existing theories into one coherent framework and quantitatively reproduces our experimental data without fitting parameters over a wide range of DNA ligand designs. Our theory identifies a subtle competition between DNA binding and steric repulsion and accurately predicts adhesion and melting at a molecular level. Combining experimental and theoretical results, our work provides a quantitative and predictive approach for guiding material design with DNA-nanotechnology and can be further extended to a diversity of colloidal and biological systems.

A quantitative prediction of DNA-mediated interactions between colloids is crucial to the design of colloidal structures for optical applications. Cui et al. measure the interaction potential with nanometer resolution and propose a theory to accurately predict adhesion and melting at a molecular level.

The nanocaterpillar's random walk: diffusion with ligand-receptor contacts

Particles with ligand-receptor contacts bind and unbind fluctuating "legs" to surfaces, whose fluctuations cause the particle to diffuse. Quantifying the diffusion of such "nanoscale caterpillars" is a challenge, since binding events often occur on very short time and length scales. Here we derive an analytical formula, validated by simulations, for the long time translational diffusion coefficient of an overdamped nanocaterpillar, under a range of modeling assumptions. We demonstrate that the effective diffusion coefficient, which depends on the microscopic parameters governing the legs, can be orders of magnitude smaller than the background diffusion coefficient. Furthermore it varies rapidly with temperature, and reproduces the striking variations seen in existing data and our own measurements of the diffusion of DNA-coated colloids. Our model gives insight into the mechanism of motion, and allows us to ask: when does a nanocaterpillar prefer to move by sliding, where one leg is always linked to the surface, and when does it prefer to move by hopping, which requires all legs to unbind simultaneously? We compare a range of systems (viruses, molecular motors, white blood cells, protein cargos in the nuclear pore complex, bacteria such as Escherichia coli, and DNA-coated colloids) and present guidelines to control the mode of motion for materials design.

Self-assembly of photonic crystals by controlling the nucleation and growth of DNA-coated colloids

DNA-coated colloids can self-assemble into an incredible diversity of crystal structures, but their applications have been limited by poor understanding and control over the crystallization dynamics. To address this challenge, we use microfluidics to quantify the kinetics of DNA-programmed self-assembly along the entire crystallization pathway, from thermally activated nucleation through reaction-limited and diffusion-limited phases of crystal growth. Our detailed measurements of the temperature and concentration dependence of the kinetics at all stages of crystallization provide a stringent test of classical theories of nucleation and growth. After accounting for the finite rolling and sliding rates of micrometer-sized DNA-coated colloids, we show that modified versions of these classical theories predict the absolute nucleation and growth rates with quantitative accuracy. We conclude by applying our model to design and demonstrate protocols for assembling large single crystals with pronounced structural coloration, an essential step in creating next-generation optical metamaterials from colloids.

Two-step crystallization and solid-solid transitions in binary colloidal mixtures

Crystallization is fundamental to materials science and is central to a variety of applications, ranging from the fabrication of silicon wafers for microelectronics to the determination of protein structures. The basic picture is that a crystal nucleates from a homogeneous fluid by a spontaneous fluctuation that kicks the system over a single free-energy barrier. However, it is becoming apparent that nucleation is often more complicated than this simple picture and, instead, can proceed via multiple transformations of metastable structures along the pathway to the thermodynamic minimum. In this article, we observe, characterize, and model crystallization pathways using DNA-coated colloids. We use optical microscopy to investigate the crystallization of a binary colloidal mixture with single-particle resolution. We observe classical one-step pathways and nonclassical two-step pathways that proceed via a solid-solid transformation of a crystal intermediate. We also use enhanced sampling to compute the free-energy landscapes corresponding to our experiments and show that both one- and two-step pathways are driven by thermodynamics alone. Specifically, the two-step solid-solid transition is governed by a competition between two different crystal phases with free energies that depend on the crystal size. These results extend our understanding of available pathways to crystallization, by showing that size-dependent thermodynamic forces can produce pathways with multiple crystal phases that interconvert without free-energy barriers and could provide approaches to controlling the self-assembly of materials made from colloids.

Self-assembly of finite-sized colloidal aggregates

One of the challenges of self-assembling finite-sized colloidal aggregates with a sought morphology is the necessity of precisely sorting the position of the colloids at the microscopic scale to avoid the formation of off-target structures. Microfluidic platforms address this problem by loading into single droplets the exact amount of colloids entering the targeted aggregate. Using theory and simulations, in this paper, we validate a more versatile design allowing us to fabricate different types of finite-sized aggregates, including colloidal molecules or core-shell clusters, starting from finite density suspensions of isotropic colloids in bulk. In our model, interactions between particles are mediated by DNA linkers with mobile tethering points, as found in experiments using DNA oligomers tagged with hydrophobic complexes immersed into supported bilayers. By fine-tuning the strength and number of the different types of linkers, we prove the possibility of controlling the morphology of the aggregates, in particular, the valency of the molecules and the size of the core-shell clusters. In general, our design shows how multivalent interactions can lead to microphase separation under equilibrium conditions.

Hydrodynamic and frictional modulation of deformations in switchable colloidal crystallites

Displacive transformations in colloidal crystals may offer a pathway for increasing the diversity of accessible configurations without the need to engineer particle shape or interaction complexity. To date, binary crystals composed of spherically symmetric particles at specific size ratios have been formed that exhibit floppiness and facile routes for transformation into more rigid structures that are otherwise not accessible by direct nucleation and growth. There is evidence that such transformations, at least at the micrometer scale, are kinetically influenced by concomitant solvent motion that effectively induces hydrodynamic correlations between particles. Here, we study quantitatively the impact of such interactions on the transformation of binary bcc-CsCl analog crystals into close-packed configurations. We first employ principal-component analysis to stratify the explorations of a bcc-CsCl crystallite into orthogonal directions according to displacement. We then compute diffusion coefficients along the different directions using several dynamical models and find that hydrodynamic correlations, depending on their range, can either enhance or dampen collective particle motions. These two distinct effects work synergistically to bias crystallite deformations toward a subset of the available outcomes.

Collagen-Inspired Self-Assembly of Twisted Filaments

Collagen consists of three peptides twisted together through a periodic array of hydrogen bonds. Here we use this as inspiration to find design rules for programmed specific interactions for self-assembling synthetic collagenlike triple helices, starting from disordered configurations. The assembly generically nucleates defects in the triple helix, the characteristics of which can be manipulated by spatially varying the enthalpy of helix formation. Defect formation slows assembly, evoking kinetic pathologies that have been observed to mutations in the primary collagen amino acid sequence. The controlled formation and interaction between defects gives a route for hierarchical self-assembly of bundles of twisted filaments.

Translational and rotational dynamics of colloidal particles interacting through reacting linkers

Much work has studied effective interactions between micron-sized particles carrying linkers forming reversible, interparticle linkages. These studies allowed understanding the equilibrium properties of colloids interacting through ligand-receptor interactions. Nevertheless, understanding the kinetics of multivalent interactions remains an open problem. Here, we study how molecular details of the linkers, such as the reaction rates at which interparticle linkages form or break, affect the relative dynamics of pairs of cross-linked colloids. Using a simulation method tracking single binding and unbinding events between complementary linkers, we rationalize recent experiments and prove that particles' interfaces can move across each other while being cross-linked. We clarify how, starting from diffusing colloids, the dynamics become arrested when increasing the number of interparticle linkages or decreasing the reaction rates. Before getting arrested, particles diffuse through rolling motion. The ability to detect rolling motion will be useful to shed new light on host-pathogen interactions.

Programmable interactions with biomimetic DNA linkers at fluid membranes and interfaces

At the heart of the structured architecture and complex dynamics of biological systems are specific and timely interactions operated by biomolecules. In many instances, biomolecular agents are spatially confined to flexible lipid membranes where, among other functions, they control cell adhesion, motility and tissue formation. Besides being central to several biological processes, multivalent interactions mediated by reactive linkers confined to deformable substrates underpin the design of synthetic-biological platforms and advanced biomimetic materials. Here we review recent advances on the experimental study and theoretical modelling of a heterogeneous class of biomimetic systems in which synthetic linkers mediate multivalent interactions between fluid and deformable colloidal units, including lipid vesicles and emulsion droplets. Linkers are often prepared from synthetic DNA nanostructures, enabling full programmability of the thermodynamic and kinetic properties of their mutual interactions. The coupling of the statistical effects of multivalent interactions with substrate fluidity and deformability gives rise to a rich emerging phenomenology that, in the context of self-assembled soft materials, has been shown to produce exotic phase behaviour, stimuli-responsiveness, and kinetic programmability of the self-assembly process. Applications to (synthetic) biology will also be reviewed.