Multifunctional coatings that mimic the endothelium: surface bound active heparin nanoparticles with in situ generation of nitric oxide from nitrosothiols

Endothelium-Mimicking Materials: A "Rising Star" for Antithrombosis

The advancement of antithrombotic materials has significantly mitigated the thrombosis issue in clinical applications involving various medical implants. Extensive research has been dedicated over the past few decades to developing blood-contacting materials with complete resistance to thrombosis. However, despite these advancements, the risk of thrombosis and other complications persists when these materials are implanted in the human body. Consequently, the modification and enhancement of antithrombotic materials remain pivotal in 21st-century hemocompatibility studies. Previous research indicates that the healthy endothelial cells (ECs) layer is uniquely compatible with blood. Inspired by bionics, scientists have initiated the development of materials that emulate the hemocompatible properties of ECs by replicating their diverse antithrombotic mechanisms. This review elucidates the antithrombotic mechanisms of ECs and examines the endothelium-mimicking materials developed through single, dual-functional and multifunctional strategies, focusing on nitric oxide release, fibrinolytic function, glycosaminoglycan modification, and surface topography modification. These materials have demonstrated outstanding antithrombotic performance. Finally, the review outlines potential future research directions in this dynamic field, aiming to advance the development of antithrombotic materials.

Steps Toward Recapitulating Endothelium: A Perspective on the Next Generation of Hemocompatible Coatings

Endothelium, the lining in this blood vessel, orchestrates three main critical functions such as protecting blood components, modulating of hemostasis by secreting various inhibitors, and directing clot digestion (fibrinolysis) by activating tissue plasminogen activator. No other surface can perform these tasks; thus, the contact of blood and blood-contacting medical devices inevitably leads to the activation of coagulation, often causing device failure, and thromboembolic complications. This perspective, first, discusses the biological mechanisms of activation of coagulation and highlights the efforts of advanced coatings to recapitulate one characteristic of endothelium, hereafter single functions of endothelium and noting necessity of the synergistic integration of its three main functions. Subsequently, it is emphasized that to overcome the challenges of blood compatibility an endothelium-mimicking system is needed, proposing a synergy of bottom-up synthetic biology, particularly synthetic cells, with passive- and bioactive surface coatings. Such integration holds promise for developing advanced biomaterials capable of recapitulating endothelial functions, thereby enhancing the hemocompatibility and performance of blood-contacting medical devices.

Optimizing the Biocompatibility of PLLA Stent Materials: Strategy with Biomimetic Coating

Background

Poly-L-lactic acid (PLLA) stents have broad application prospects in the treatment of cardiovascular diseases due to their excellent mechanical properties and biodegradability. However, foreign body reactions caused by stent implantation remain a bottleneck that limits the clinical application of PLLA stents. To solve this problem, the biocompatibility of PLLA stents must be urgently improved. Albumin, the most abundant inert protein in the blood, possesses the ability to modify the surface of biomaterials, mitigating foreign body reactions-a phenomenon described as the "stealth effect". In recent years, a strategy based on albumin camouflage has become a focal point in nanomedicine delivery and tissue engineering research. Therefore, albumin surface modification is anticipated to enhance the surface biological characteristics required for vascular stents. However, the therapeutic applicability of this modification has not been fully explored.

Methods

Herein, a bionic albumin (PDA-BSA) coating was constructed on the surface of PLLA by a mussel-inspired surface modification technique using polydopamine (PDA) to enhance the immobilization of bovine serum albumin (BSA).

Results

Surface characterization revealed that the PDA-BSA coating was successfully constructed on the surface of PLLA materials, significantly improving their hydrophilicity. Furthermore, in vivo and in vitro studies demonstrated that this PDA-BSA coating enhanced the anticoagulant properties and pro-endothelialization effects of the PLLA material surface while inhibiting the inflammatory response and neointimal hyperplasia at the implantation site.

Conclusion

These findings suggest that the PDA-BSA coating provides a multifunctional biointerface for PLLA stent materials, markedly improving their biocompatibility. Further research into the diverse applications of this coating in vascular implants is warranted.

Design and Fabrication of Environmentally Responsive Nanoparticles for the Diagnosis and Treatment of Atherosclerosis

Cardiovascular disease poses a significant threat to human health in today's society. A major contributor to cardiovascular disease is atherosclerosis (AS). The development of plaque in the affected areas involves a complex pathological environment, and the disease progresses rapidly. Nanotechnology, combined with emerging diagnostic and treatment methods, offers the potential for the management of this condition. This paper presents the latest advancements in environment-intelligent responsive controlled-release nanoparticles designed specifically for the pathological environment of AS, which includes characteristics such as low pH, high reactive oxygen species levels, high shear stress, and multienzymes. Additionally, the paper summarizes the applications and features of nanotechnology in interventional therapy for AS, including percutaneous transluminal coronary angioplasty and drug-eluting stents. Furthermore, the application of nanotechnology in the diagnosis of AS shows promising real-time, accurate, and continuous effects. Lastly, the paper explores the future prospects of nanotechnology, highlighting the tremendous potential in the diagnosis and treatment of atherosclerotic diseases, especially with the ongoing development in nano gas, quantum dots, and Metal-Organic Frameworks materials.

A polyurethane-based hydrophilic elastomer with multi-biological functions for small-diameter vascular grafts

Thrombosis and intimal hyperplasia (IH) are two major problems faced by the small-diameter vascular grafts. Mimicking the native endothelium and physiological elasticity of blood vessels is considered an ideal strategy. Polyurethane (PU) is suitable for vascular grafts in mechanics because of its molecular designability and elasticity; however, it generally lacks the endothelium-like biofunctions and hydrophilicity. To solve this contradiction, a hydrophilic PU elastomer is developed by crosslinking the hydrophobic hard-segment chains containing diselenide with diaminopyrimidine-capped polyethylene glycol (PEG). In this network, the hydrophobic aggregation occurs underwater due to the uninterrupted hard-segment chains, leading to a significant self-enhancement in mechanics, which can be tailored to the elasticity similar to natural vessels by adjusting the crosslinking density. A series of in vitro studies confirm that the hydrophilicity of PEG and biological activities of aminopyrimidine and diselenide give the PU multi-biological functions similar to the native endothelium, including stable catalytic release of nitric oxide (NO) in the physiological level; anti-adhesion and anti-activation of platelets; inhibition of migration, adhesion, and proliferation of smooth muscle cells (SMCs); and antibacterial effect. In vivo studies further prove the good histocompatibility with both significant reduction in immune response and calcium deposition. STATEMENT OF SIGNIFICANCE: Constructing small-diameter vascular grafts similar to the natural vessels is considered an ideal method to solve the restenosis caused by thrombosis and intimal hyperplasia (IH). Because of the long-term stability, bulk modification is more suitable for implanted materials, however, how to achieve the biofunctions, hydrophilicity, and elasticity simultaneously is still a big challenge. In this work, a kind of polyurethane-based elastomer has been designed and prepared by crosslinking the functional long hard-segment chains with PEG soft segments. The underwater elasticity based on hydration-induced stiffening and the multi-biological functions similar to the native endothelium are compatible with natural vessels. Both in vitro and in vivo experiments demonstrate the potential of this PU as small-diameter vascular grafts.

A review on multifaceted biomedical applications of heparin nanocomposites: Progress and prospects

Advances in polymer-based nanocomposites have revolutionized biomedical applications over the last two decades. Heparin (HP), being a highly bioactive polymer of biological origin, provides strong biotic competence to the nanocomposites, broadening the horizon of their applicability. The efficiency, biocompatibility, and biodegradability properties of nanomaterials significantly improve upon the incorporation of heparin. Further, inclusion of structural/chemical derivatives, fractionates, and mimetics of heparin enable fabrication of versatile nanocomposites. Modern nanotechnological interventions have exploited the inherent biofunctionalities of heparin by formulating various nanomaterials, including inorganic/polymeric nanoparticles, nanofibers, quantum dots, micelles, liposomes, and nanogels ensuing novel functionalities targeting diverse clinical applications involving drug delivery, wound healing, tissue engineering, biocompatible coatings, nanosensors and so on. On this note, the present review explicitly summarises the recent HP-oriented nanotechnological developments, with a special emphasis on the reported successful engagement of HP and its derivatives/mimetics in nanocomposites for extensive applications in the laboratory and health-care facility. Further, the advantages and limitations/challenges specifically associated with HP in nanocomposites, undertaken in this current review are quintessential for future innovations/discoveries pertaining to HP-based nanocomposites.

A heparin-based nanogel system for redox and pH dual-responsive delivery of cisplatin

Heparin recently has been discovered as a novel anti-cancer agent. The combinations of heparin with other agents was reported not only to reduce the undesired effects of free heparin and increase the cellular uptake of the delivered molecules, but also is the basis for the design and development of multi-stimulation response systems to improve their killing cancer cell efficiency at the target positions. This study aimed to design a redox and pH dual-responsive anticancer system based on heparin for cisplatin (CPT) therapy. Heparin was first cross-linked with Poloxamer 407 chains via disulfide bridges to form a redox-sensitive system Hep-P407. CPT was then encapsulated into the Hep-P407 system via the complex of Platin and carboxyl groups to form the redox/pH-responsive system CPT@Hep-P407. The obtained Hep-P407 systems were proved and characterized using specific techniques including1H-NMR, zeta potential, Dynamic Light Scattering (DLS) and Fourier-transform infrared spectroscopy. The dual-responsive behavior to redox and pH of CPT@Hep-P407 was proved through DLS, zeta andin vitrorelease analysis meanwhile its cytotoxicity was investigated using Resazurin assay. The CPT@Hep-P407 system is expected to be a promising redox/pH-responsive anticancer system based on heparin for CPT therapy.

Unravelling Surface Modification Strategies for Preventing Medical Device-Induced Thrombosis

The use of biomaterials in implanted medical devices remains hampered by platelet adhesion and blood coagulation. Thrombus formation is a prevalent cause of failure of these blood-contacting devices. Although systemic anticoagulant can be used to support materials and devices with poor blood compatibility, its negative effects such as an increased chance of bleeding, make materials with superior hemocompatibility extremely attractive, especially for long-term applications. This review examines blood-surface interactions, the pathogenesis of clotting on blood-contacting medical devices, popular surface modification techniques, mechanisms of action of anticoagulant coatings, and discusses future directions in biomaterial research for preventing thrombosis. In addition, this paper comprehensively reviews several novel methods that either entirely prevent interaction between material surfaces and blood components or regulate the reaction of the coagulation cascade, thrombocytes, and leukocytes.

Gas station in blood vessels: An endothelium mimicking, self-sustainable nitric oxide fueling stent coating for prevention of thrombosis and restenosis

Stenting is the primary treatment for vascular obstruction-related cardiovascular diseases, but it inevitably causes endothelial injury which may lead to severe thrombosis and restenosis. Maintaining nitric oxide (NO, a vasoactive mediator) production and grafting endothelial glycocalyx such as heparin (Hep) onto the surface of cardiovascular stents could effectively reconstruct the damaged endothelium. However, insufficient endogenous NO donors may impede NO catalytic generation and fail to sustain cardiovascular homeostasis. Here, a dopamine-copper (DA-Cu) network-based coating armed with NO precursor L-arginine (Arg) and Hep (DA-Cu-Arg-Hep) is prepared using an organic solvent-free dipping technique to form a nanometer-thin coating onto the cardiovascular stents. The DA-Cu network adheres tightly to the surface of stents and confers excellent NO catalytic activity in the presence of endogenous NO donors. The immobilized Arg functions as a NO fuel to generate NO via endothelial nitric oxide synthase (eNOS), while Hep works as eNOS booster to increase the level of eNOS to decompose Arg into NO, ensuring a sufficient supply of NO even when endogenous donors are insufficient. The synergistic interaction between Cu and Arg is analogous to a gas station to fuel NO production to compensate for the insufficient endogenous NO donor in vivo. Consequently, it promotes the reconstruction of natural endothelium, inhibits smooth muscle cell (SMC) migration, and suppresses cascading platelet adhesion, preventing stent thrombosis and restenosis. We anticipate that our DA-Cu-Arg-Hep coating will improve the quality of life of cardiovascular patients through improved surgical follow-up, increased safety, and decreased medication, as well as revitalize the stenting industry through durable designs.

Challenge of material haemocompatibility for microfluidic blood-contacting applications

Biological applications of microfluidics technology is beginning to expand beyond the original focus of diagnostics, analytics and organ-on-chip devices. There is a growing interest in the development of microfluidic devices for therapeutic treatments, such as extra-corporeal haemodialysis and oxygenation. However, the great potential in this area comes with great challenges. Haemocompatibility of materials has long been a concern for blood-contacting medical devices, and microfluidic devices are no exception. The small channel size, high surface area to volume ratio and dynamic conditions integral to microchannels contribute to the blood-material interactions. This review will begin by describing features of microfluidic technology with a focus on blood-contacting applications. Material haemocompatibility will be discussed in the context of interactions with blood components, from the initial absorption of plasma proteins to the activation of cells and factors, and the contribution of these interactions to the coagulation cascade and thrombogenesis. Reference will be made to the testing requirements for medical devices in contact with blood, set out by International Standards in ISO 10993-4. Finally, we will review the techniques for improving microfluidic channel haemocompatibility through material surface modifications-including bioactive and biopassive coatings-and future directions.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Multistage Anticoagulant Surfaces: A Synergistic Combination of Protein Resistance, Fibrinolysis, and Endothelialization

Anticoagulant surface modification of blood-contacting materials has been shown to be effective in preventing thrombosis and reducing the dose of anticoagulant drugs that patients take. However, commercially available anticoagulant coatings, that is, both bioinert and bioactive coatings, are typically based on a single anticoagulation strategy. This puts the anticoagulation function of the coating at risk of failure during long-term use. Considering the several pathways of the human coagulation system, the synergy of multiple anticoagulation theories may provide separate, targeted effects at different stages of thrombosis. Based on this presumption, in this work, negatively charged poly(sodium p-styrenesulfonate-co-oligo(ethylene glycol) methyl ether methacrylate) and positively charged poly(lysine-co-1-adamantan-1-ylmethyl methacrylate) were synthesized to construct matrix layers on the substrate by electrostatic layer-by-layer self-assembly (LBL). Amino-functionalized β-cyclodextrin (β-CD-PEI) was subsequently immobilized on the surface by host-guest interactions, and heparin was grafted. By adjusting the content of poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA), the interactions between modified surfaces and plasma proteins/cells were regulated. This multistage anticoagulant surface exhibits inertness at the initial stage of implantation, resisting nonspecific protein adsorption (POEGMA). When coagulation reactions occur, heparin exerts its active anticoagulant function in a timely manner, blocking the pathway of thrombosis. If thrombus formation is inevitable, lysine can play a fibrinolytic role in dissolving fibrin clots. Finally, during implantation, endothelial cells continue to adhere and proliferate on the surface, forming an endothelial layer, which meets the blood compatibility requirements. This method provides a new approach to construct a multistage anticoagulant surface for blood-contacting materials.

Recent Advances in Functional Nanomaterials for Catalytic Generation of Nitric Oxide: A Mini Review

As a gaseous second messenger, nitric oxide (NO) plays an important role in a series of signal pathways. Research on the NO regulation for various disease treatments has aroused wide concern. However, the lack of accurate, controllable, and persistent release of NO has significantly limited the application of NO therapy. Profiting from the booming development of advanced nanotechnology, a mass of nanomaterials with the properties of controllable release have been developed to seek new and effective NO nano-delivery approaches. Nano-delivery systems that generate NO through catalytic reactions exhibit unique superiority in terms of precise and persistent release of NO. Although certain achievements have been made in the catalytically active NO delivery nanomaterials, some basic but critical issues, such as the concept of design, are of low attention. Herein, an overview of the generation of NO through catalytic reactions and the design principles of related nanomaterials are summarized. Then, the nanomaterials that generate NO through catalytic reactions are classified. Finally, the bottlenecks and perspectives are also discussed in depth for the future development of catalytical NO generation nanomaterials.

Cellular infiltration in an injectable sulfated cellulose nanocrystal hydrogel and efficient angiogenesis by VEGF loading

BACKGROUND

Cellular infiltration and angiogenesis into implanted biomaterial scaffolds are crucial for successful host tissue integration and tissue regeneration. Cellulose nanocrystal (CNC) is a nano-sized cellulose derivative, which can form an injectable physical gel with salts. Sulfate groups of sulfated CNC (CNC-S) can act as a binding domain to various growth factors and cytokines with a heparin-binding domain for sustained release of them. Vascular endothelial growth factor (VEGF) can promote the proliferation of endothelial cells and angiogenesis. In this study, VEGF-loaded CNC-S hydrogel was evaluated as an injectable scaffold that can induce cellular infiltration and angiogenesis.

METHODS

CNC-S was hydrolyzed to get desulfated CNC (CNC-DS), which was used as a negative control group against CNC-S. Both CNC-S and CNC-DS hydrogels were prepared and compared in terms of biocompatibility and VEGF release. The hydrogels with or without VEGF loading were subcutaneously injected into mice to evaluate the biocompatibility, cellular infiltration, and angiogenesis induction of the hydrogels.

RESULTS

Both hydrogels possessed similar stability and shear-thinning behavior to be applicable as injectable hydrogels. However, CNC-S hydrogel showed sustained release (until 8 weeks) of VEGF whereas CNC-DS showed a very fast release of VEGF with a large burst. Subcutaneously injected CNC-S hydrogel showed much enhanced cellular infiltration as well as better biocompatibility with milder foreign body response than CNC-DS hydrogel. Furthermore, VEGF-loaded CNC-S hydrogel induced significant angiogenesis inside the hydrogel whereas VEGF-loaded CNC-DS did not.

CONCLUSION

CNC-S possesses good properties as a biomaterial including injectability, biocompatibility, and allowing cellular infiltration and sustained release of growth factors. VEGF-loaded CNC-S hydrogel exhibited efficient angiogenesis inside the hydrogel. The sulfate group of CNC-S was a key for good biocompatibility and the biological activities of VEGF-loaded CNC hydrogel.

Development and In Vitro Whole Blood Hemocompatibility Screening of Endothelium-Mimetic Multifunctional Coatings

Multifunctional antithrombotic surface modifications for blood-contacting medical devices have emerged as a solution for foreign surface-mediated coagulation disturbance. Herein, we have developed and evaluated an endothelium-inspired strategy to reduce the thrombogenicity of medical plastics by imparting nitric oxide (NO) elution and heparin immobilization on the material surface. This dual-action approach (NO+Hep) was applied to polyethylene terephthalate (PET) blood incubation vials and compared to isolated modifications. Vials were characterized to evaluate NO surface flux as well as heparin density and activity. Hemocompatibility was assessed in vitro using whole blood from human donors. Compared to unmodified surfaces, blood incubated in the NO+Hep vials exhibited reduced platelet aggregation (15% decrease AUC, p = 0.040) and prolonged plasma clotting times (aPTT = 147% increase, p < 0.0001, prothrombin time = 5% increase, p = 0.0002). Prolongation of thromboelastography reaction time and elevated antifactor Xa levels in blood from NO+Hep versus PET vials suggests some heparin leaching from the vial surface, confirmed by post-blood incubation heparin density assessment. Results suggest NO+Hep surface modification is a promising approach for blood-contacting plastics; however, careful tuning of NO flux and heparin stabilization are essential and require assessment using human blood as performed here.

Recent advances in inhibiting atherosclerosis and restenosis: from pathogenic factors, therapeutic agents to nano-delivery strategies

Due to dominant atherosclerosis etiology, cardiovascular diseases (CVDs) remain the leading cause of morbidity and mortality worldwide. In clinical trials, advanced atherosclerotic plaques can be removed by angioplasty and vascular...

Endothelialization strategy of implant materials surface: The newest research in recent 5 years

In recent years, more and more metal or non-metal materials have been used in the treatment of cardiovascular diseases, but the vascular complications after transplantation are still the main factors restricting the clinical application of most grafts, such as acute thrombosis and graft restenosis. Implant materials have been extensively designed and surface optimized by researchers, but it is still too difficult to avoid complications. Natural vascular endodermis has excellent function, anti-coagulant and anti-intimal hyperplasia, and it is also the key to maintaining the homeostasis of normal vascular microenvironment. Therefore, how to promote the adhesion of endothelial cells (ECs) on the surface of cardiovascular materials to achieve endothelialization of the surface is the key to overcoming the complications after implant materialization. At present, the surface endothelialization design of materials based on materials surface science, bioactive molecules, and biological function intervention and feedback has attracted much attention. In this review, we summarize the related research on the surface modification of materials by endothelialization in recent years, and analyze the advantages and challenges of current endothelialization design ideas, explain the relationship between materials, cells, and vascular remodeling in order to find a more ideal endothelialization surface modification strategy for future researchers to meet the requirements of clinical biocompatibility of cardiovascular materials.

Polyethyleneimine-assisted co-deposition of polydopamine coating with enhanced stability and efficient secondary modification

The stability and grafting efficiency are important for polydopamine (pDA) coatings used as platforms for secondary grafting.

Surface modification strategies to improve titanium hemocompatibility: a comprehensive review

Titanium and its alloys are widely used in different biomaterial applications due to their remarkable mechanical properties and bio-inertness. However, titanium-based materials still face some challenges, with an emphasis on hemocompatibility. Blood-contacting devices such as stents, heart valves, and circulatory devices are prone to thrombus formation, restenosis, and inflammation due to inappropriate blood-implant surface interactions. After implantation, when blood encounters these implant surfaces, a series of reactions takes place, such as protein adsorption, platelet adhesion and activation, and white blood cell complex formation as a defense mechanism. Currently, patients are prescribed anticoagulant drugs to prevent blood clotting, but these drugs can weaken their immune system and cause profound bleeding during injury. Extensive research has been done to modify the surface properties of titanium to enhance its hemocompatibility. Results have shown that the modification of surface morphology, roughness, and chemistry has been effective in reducing thrombus formation. The main focus of this review is to analyze and understand the different modification techniques on titanium-based surfaces to enhance hemocompatibility and, consequently, recognize the unresolved challenges and propose scopes for future research.

Surface engineering at the nanoscale: A way forward to improve coronary stent efficacy

Coronary in-stent restenosis and late stent thrombosis are the two major inadequacies of vascular stents that limit its long-term efficacy. Although restenosis has been successfully inhibited through the use of the current clinical drug-eluting stent which releases antiproliferative drugs, problems of late-stent thrombosis remain a concern due to polymer hypersensitivity and delayed re-endothelialization. Thus, the field of coronary stenting demands devices having enhanced compatibility and effectiveness to endothelial cells. Nanotechnology allows for efficient modulation of surface roughness, chemistry, feature size, and drug/biologics loading, to attain the desired biological response. Hence, surface topographical modification at the nanoscale is a plausible strategy to improve stent performance by utilizing novel design schemes that incorporate nanofeatures via the use of nanostructures, particles, or fibers, with or without the use of drugs/biologics. The main intent of this review is to deliberate on the impact of nanotechnology approaches for stent design and development and the recent advancements in this field on vascular stent performance.

Combination strategies for antithrombotic biomaterials: an emerging trend towards hemocompatibility

Surface-induced thrombosis is a frequent, critical issue for blood-contacting medical devices that poses a serious threat to patient safety and device functionality. Antithrombotic material design strategies including the immobilization of anticoagulants, alterations in surface chemistries and morphology, and the release of antithrombotic compounds have made great strides in the field with the ultimate goal of circumventing the need for systemic anticoagulation, but have yet to achieve the same hemocompatibility as the native endothelium. Given that the endothelium achieves this state through the use of many mechanisms of action, there is a rising trend in combining these established design strategies for improved antithrombotic actions. Here, we describe this emerging paradigm, highlighting the apparent advantages of multiple antithrombotic mechanisms of action and discussing the demonstrated potential of this new direction.

Multifunctional surfaces through synergistic effects of heparin and nitric oxide release for a highly efficient treatment of blood-contacting devices

Thrombosis and inflammation after implantation remain unsolved problems associated with various medical devices with blood-contacting applications. In this study, we develop a multifunctional biomaterial with enhanced hemocompatibility and anti-inflammatory effects by combining the anticoagulant activity of heparin with the vasodilatory and anti-inflammatory properties of nitric oxide (NO). The co-immobilization of these two key molecules with distinct therapeutic effects is achieved by simultaneous conjugation of heparin (HT) and copper nanoparticles (Cu NPs), an NO-generating catalyst, via a simple tyrosinase (Tyr)-mediated reaction. The resulting immobilized surface showed long-term, stable and adjustable NO release for 14 days. Importantly, the makeup of the material endows the surface with the ability to promote endothelialization and to inhibit coagulation, platelet activation and smooth muscle cell proliferation. In addition, the HT/Cu NP co-immobilized surface enhanced macrophage polarization towards the M2 phenotype in vitro, which can reduce the inflammatory response and improve the adaptation of implants in vivo. This study demonstrated a simple but efficient method of developing a multifunctional surface for blood-contacting devices.

Bifunctional polymer brush-grafted coronary stent for anticoagulation and endothelialization

At present, cardiovascular stent intervention faces clinical complications such as delayed endothelialization, late thrombosis and restenosis after implantation. In this work, a kind of bifunctional polymer brush-grafted coronary stent with anticoagulant and endothelial functions was developed. First, a block copolymer brush with zwitterionic structure consisting of sulfoethyl methacrylate (SBMA) and glycidyl methacrylate (GMA) was surface-induced grafted onto the surface of bare metal coronary stent by atom transfer radical polymerization. The diethylenetriamine NONOate (DETA NONOate), acted as nitric oxide (NO) donor to promote endothelialization, was then attached to polyglycidyl methacrylate (PGMA) brush by a reactive epoxy group to produce NO. The process of chemical modification and the release behavior of NO were characterized in detail. Moreover, the results of anticoagulant test, cytotoxicity test, endothelial cells (ECs) proliferation test and animal experiment of this bifunctional polymer brush-grafted coronary stent we proposed indicate that the zwitterion modified and NO supplied bifunctional coatings has good anticoagulant property, no cytotoxicity and significant endothelialization effect. This work opens the door to combine biological activity of NO and anticoagulant effect of zwitterions, which has great potential to address post-operative side effects associated with restenosis and late stent thrombosis.

Mimicking the Nitric Oxide-Releasing and Glycocalyx Functions of Endothelium on Vascular Stent Surfaces

Endothelium can secrete vasoactive mediators and produce specific extracellular matrix, which contribute jointly to the thromboresistance and regulation of vascular cell behaviors. From a bionic point of view, introducing endothelium-like functions onto cardiovascular stents represents the most effective means to improve hemocompatibility and reduce late stent restenosis. However, current surface strategies for vascular stents still have limitations, like the lack of multifunctionality, especially the monotony in endothelial-mimic functions. Herein, a layer-by-layer grafting strategy to create endothelium-like dual-functional surface on cardiovascular scaffolds is reported. Typically, a nitric oxide (NO, vasoactive mediator)-generating compound and an endothelial polysaccharide matrix molecule hyaluronan (HA) are sequentially immobilized on allylamine-plasma-deposited stents through aqueous amidation. In this case, the stents could be well-engineered with dual endothelial functions capable of remote and close-range regulation of the vascular microenvironment. The synergy of NO and endothelial glycocalyx molecules leads to efficient antithrombosis, smooth muscle cell (SMC) inhibition, and perfect endothelial cell (EC)-compatibility of the stents in vitro. Moreover, the dual-functional stents show efficient antithrombogenesis ex vivo, rapid endothelialization, and long-term prevention of restenosis in vivo. Therefore, this study will provide new solutions for not only multicomponent surface functionalization but also the bioengineering of endothelium-mimic vascular scaffolds with improved clinical outcomes.

Epigallocatechin gallate mediated sandwich-like coating for mimicking endothelium with sustained therapeutic nitric oxide generation and heparin release

In-stent restenosis after stenting is generally characterized by an inflammatory response, excessive proliferation of smooth muscle cells, and delayed healing of the endothelium layer. In this study, inspired by catechol/gallol surface chemistry, a sandwich-like layer-by-layer (LBL) coating was developed using chitosan and heparin as polyelectrolytes, along with the embedding of an epigallocatechin gallate/copper (EGCG/Cu) complex. The embedding of EGCG stabilized the coating by various intermolecular interactions in the LBL coating (e.g., π-π stacking, weak intermolecular crosslinking, and enriched hydrogen bonding) and supported the sustained release of the cargo heparin over 90 days. This design enabled a biomimetic endothelium function in terms of the sustained release of heparin and continuous in situ generation of nitric oxide, driven by the catalytic decomposition of endogenous S-nitrostothiols by copper ions. The result showed enhanced durability of anticoagulation and suppressed inflammatory response. Moreover, the "sandwich-like" coating supported the growth of endothelial cells and up-regulated the protein expression of vascular endothelial growth factor, while effectively suppressing the proliferation and migration of smooth muscle cells (SMCs) via the up-regulation of cyclic guanosine monophosphate. Ex vivo and in vivo experiments demonstrated the effectiveness of the sandwich-like coating in preventing thrombosis formation, suppressing the growth of SMCs, reducing the infiltration and activation of inflammatory cells, and ultimately achieving rapid in situ endothelialization. Hence, the EGCG-assisted sandwich-like coating might be used as a robust and versatile surface modification strategy for implantable cardiovascular devices.

Platelet-derived porous nanomotor for thrombus therapy

The treatment difficulties of venous thrombosis include short half-life, low utilization, and poor penetration of drugs at thrombus site. Here, we develop one kind of mesoporous/macroporous silica/platinum nanomotors with platelet membrane (PM) modification (MMNM/PM) for sequentially targeting delivery of thrombolytic and anticoagulant drugs for thrombus treatment. Regulated by the special proteins on PM, the nanomotors target the thrombus site and then PM can be ruptured under near-infrared (NIR) irradiation to achieve desirable sequential drug release, including rapid release of thrombolytic urokinase (3 hours) and slow release of anticoagulant heparin (>20 days). Meantime, the motion ability of nanomotors under NIR irradiation can effectively promote them to penetrate deeply in thrombus site to enhance retention ratio. The in vitro and in vivo evaluation results confirm that the synergistic effect of targeting ability from PM and motion ability from nanomotors can notably enhance the thrombolysis effect in both static/dynamic thrombus and rat model.

Coronary Stents Decorated by Heparin/NONOate Nanoparticles for Anticoagulant and Endothelialized Effects

In the treatment of coronary artery disease (CAD), the use of stent implantation often leads to clinical complications such as restenosis, delayed endothelial healing, and thrombosis. Here, we develop a double drug sustained-release coating for the stent surface by grafting heparin/NONOate nanoparticles (Hep/NONOates). The Hep/NONOates and surface modification of the stent were characterized by X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, static water contact angle, and scanning electron microscopy (SEM), and the release behaviors of the anticoagulant, heparin (Hep) and the bioactive molecule, nitric oxide (NO) were studied. Furthermore, the blood compatibility and cytotoxicity of the modified stent were evaluated by whole blood adhesion and platelet adhesion tests, hemolysis assay, morphological changes of red blood cells, plasma recalcification time assay, in vitro coagulation time tests, and MTT assay. Finally, the results of a rabbit carotid artery stent implantation experiment showed that the double drug sustained-release coating for the stent can accelerate regeneration of endothelial cells and keep good anticoagulant activity. This study can provide new design ideas based on nanotechnology for improving the safety and effectiveness of drug-eluting stents.

Heparin/poly-l-lysine nanoplatform with growth factor delivery for surface modification of cardiovascular stents: The influence of vascular endothelial growth factor loading

The rapid re-endothelialization of the vascular stent surface is desirable for preventing thrombosis or reducing restenosis. Many biological factors that promote the biological behavior of endothelial cells have been used for the surface modification of stents. Vascular endothelial growth factor (VEGF), which plays an important role in angiogenesis, induces strong vascular growth. In this study, we investigated different VEGF concentrations (50 to 500 ng/ml) to determine the optimum concentration for biocompatibility. First, VEGF-loaded heparin/poly-l-lysine (Hep-PLL) nanoparticles were created by electrostatic interactions. Then, the VEGF-loaded nanoparticles were immobilized on dopamine-coated 316 L stainless steel (SS) surfaces. The physical and chemical properties of the modified surface were characterized and the biocompatibility was evaluated in vitro. The results indicated that the VEGF-loaded nanoparticles were immobilized successfully on the 316LSS surface, as evidenced by the results of Alcian Blue staining and water contact angle (WCA) measurements. The low platelet adhesion and activation indicated that the modified surfaces had good blood compatibility. The modified surfaces showed a good inhibitory effect on smooth muscle cells, indicating that they inhibited tissue hyperplasia. In addition, the modified surfaces significantly promoted endothelial cell adhesion, proliferation, migration, and biological activity, especially VEGF concentration was 350 ng/ml (NPV350). The optical VEGF concentration of the surface modified Hep-PLL nanoparticles was 350 ng/ml. The proposed method shows promise for potential applications for cardiovascular devices.

Endothelium-Mimicking Multifunctional Coating Modified Cardiovascular Stents via a Stepwise Metal-Catechol-(Amine) Surface Engineering Strategy

Stenting is currently the major therapeutic treatment for cardiovascular diseases. However, the nonbiogenic metal stents are inclined to trigger a cascade of cellular and molecular events including inflammatory response, thrombogenic reactions, smooth muscle cell hyperproliferation accompanied by the delayed arterial healing, and poor reendothelialization, thus leading to restenosis along with late stent thrombosis. To address prevalence critical problems, we present an endothelium-mimicking coating capable of rapid regeneration of a competently functioning new endothelial layer on stents through a stepwise metal (copper)-catechol-(amine) (MCA) surface chemistry strategy, leading to combinatorial endothelium-like functions with glutathione peroxidase-like catalytic activity and surface heparinization. Apart from the stable nitric oxide (NO) generating rate at the physiological level (2.2 × 10^-10 mol/cm²/min lasting for 60 days), this proposed strategy could also generate abundant amine groups for allowing a high heparin conjugation efficacy up to ∼1 μg/cm², which is considerably higher than most of the conventional heparinized surfaces. The resultant coating could create an ideal microenvironment for bringing in enhanced anti-thrombogenicity, anti-inflammation, anti-proliferation of smooth muscle cells, re-endothelialization by regulating relevant gene expressions, hence preventing restenosis in vivo. We envision that the stepwise MCA coating strategy would facilitate the surface endothelium-mimicking engineering of vascular stents and be therefore helpful in the clinic to reduce complications associated with stenosis.

Green Tea Polyphenol Induced Mg2+-rich Multilayer Conversion Coating: Toward Enhanced Corrosion Resistance and Promoted in Situ Endothelialization of AZ31 for Potential Cardiovascular Applications

As a promising biodegradable metallic material, magnesium (Mg) and its alloys have attracted special attention in the recent decade. However, challenges still remain due to its high corrosion rate and insufficient biocompatibility after implantation. In this work, we prepare a simple and versatile green tea phenol-metal induced multilayer conversion coating (Mg²⁺ incorporated epigallocatechin gallate (EGCG) coating) on magnesium alloys' (AZ31) substrate by layer-by-layer (LBL) method. The surface morphology results revealed that, with the incorporation of Mg²⁺, the as-formed EGCG/Mg coating was rich in phenol-Mg complex and presented more homogeneous and dense morphology, with far less cracks than the pure EGCG coating. The in vitro degradation rate and corrosion resistance were studied by electrochemical corrosion tests and monitoring of the changed pH value and hydrogen evolution, respectively, which revealed that the corrosion rate was effectively decreased compared to that of bare AZ31 after it was protected by EGCG/Mg coating. In vitro and ex vivo thrombogenicity test demonstrated the EGCG/Mg coatings presented an impressive improvement in decreasing the adhesion and activation of platelets and erythrocytes, in activated partial thromboplastin time (APTT), and in antithrombogenicity compared to those of bare AZ31. Owing to the mild degradation rate, in combination with the biological function of EGCG, enhanced endothelial cells' (ECs') adhesion and proliferation, suppressed smooth muscle cells' (SMCs') adhesion/proliferation, and inhibited cytokine release were observed on EGCG/Mg coated AZ31 alloy. Besides, the in vivo subcutaneous embedding experiment suggested that the EGCG/Mg coating performed more mild tissue response due to the improved corrosion resistance to the surrounding microenvironment. Moreover, for in vivo abdominal aorta assay, the EGCG/Mg coated AZ31 wire presented better corrosion resistance and enhanced re-endothelialization compared to bare AZ31 wire. These results suggested the potential of using green tea polyphenol induced Mg²⁺-rich multilayer conversion coating for enhanced corrosion protection and desired biocompatibility of biodegradable cardiovascular implants.

Micelle-embedded coating with ebselen for nitric oxide generation

Nitric oxide generation is considered to be a key factor to mimic endothelial function in terms of anti-coagulation and anti-hyperplasia. Herein, ebselen which could play the similar role as glutathion peroxidase-like was loaded into micelles and was further assembled into a layer-by-layer coating. The ability of nitric oxide generation and corresponding biological effect were investigated. Endothelial-mimetic surface has now attracted huge attention in blood-contacting materials, due to its inherent ability of secreting nitric oxide. Among those categories, nitric oxide generation surface is considered to be safe and tunable in the modification of vascular biomedical devices. How to adsorb or immobilize glutathion peroxidase-like catalyst and maintain sustained/safe nitric oxide generation is full of interest. This study aimed at developing a functional coating constructed via layer-by-layer assembly to introduce the catalyst into the coating by pre-loading ebselen in micelles. We firstly introduced phenylboronic acid moiety into the micelle molecule backbone and grafted catechol moiety to chitosan backbone. Then, chitosan, micelles (containing ebselen) and heparin were adopted as polyelectrolytes and then alternatively assembled onto the substrate via layer-by-layer protocol. The catechol was conjugated to the amine groups of chitosan by Schiff base reaction to synthesize chitosan-catechol. The hydrophobic cholesterol was conjugated to the one end of the hydrophilic hyaluronic acid, and the hydroxymethylphenylboronic acid was conjugated to the other end via the esterification of carboxyl (-COOH) and hydroxyl (-OH). The modified hyaluronic acid could spontaneously form micelles in aqueous solution. Ebselen was the loaded into the as-prepared micelles. Chitosan-catechol, heparin, and micelles were alternatively assembled onto the substrate layer by layer to form a micelle-embedded coating. The micelle-embedded coating with ebselen was successfully obtained and the nitric oxide generation ability was in a safe level which was close to healthy endothelial cells. The coating could effectively inhibit platelet adhesion and smooth muscle cell proliferation. The use of ebselen preloaded into micelles could provide a sustained release of catalyst for in situ nitric oxide generation. Besides, this method could also be used to load diverse drugs and regulate desired properties. The study was approved by the Institutional Review Board of the West China Hospital in Sichuan University on March 3, 2018, with approval No. K2018044.

Micelle-Embedded Layer-by-Layer Coating with Catechol and Phenylboronic Acid for Tunable Drug Loading, Sustained Release, Mild Tissue Response, and Selective Cell Fate for Re-endothelialization

Tunable/sustained drug loading/releasing are of significance in addressing low cytotoxicity, long-term performance, and localized mild healing response in biomedical applications. With an ingenious design, a self-healing sandwiched layer-by-layer (LBL) coating was constructed by using chitosan/heparin as adopted polyelectrolytes with embedding of micelles, in which the chitosan backbone was grafted with catechol and the micelle was modified with exposed phenylboronic acid, endowing the coating with enhanced stability by abundant interactions among coating components (e.g., boric acid ester bond formation, weak intermolecular cross-linking, π-π interactions, and H-bonding). Moreover, rapamycin and atorvastatin calcium were selected as drug candidates and loaded into micelles, followed by drug-releasing behavior study. It was found that the LBL coating maintained a linear growth mode up to 30 cycles, giving a favorable tunability of coating construction and drug loading. The coating could also support sustained release of payloads and provide wild tissue response. With the systematic in vitro and in vivo study, such catechol-phenylboronic acid-enhanced LBL coating with drug loading would also address enhanced antiplatelet adhesion/activation and direct cell fate of endothelial cells and smooth muscle cells via tuning of coating cycles and loaded drugs. With modular assembly, such coating indicated potential for achieving enhanced re-endothelialization for vascular implants.