A Programmable Microfluidic Paper-Based Analytical Device for Simultaneous Colorimetric and Photothermal Visual Sensing of Multiple Enzyme Activities

New strategies for the simultaneous and portable detection of multiple enzyme activities are highly desirable for clinical diagnosis and home care. However, the methods developed thus far generally suffer from high costs, cumbersome procedures, and heavy reliance on large-scale instruments. To satisfy the actual requirements of rapid, accurate, and on-site detection of multiple enzyme activities, we report herein a smartphone-assisted programmable microfluidic paper-based analytical device (μPAD) that utilizes colorimetric and photothermal signals for simultaneous, accurate, and visual quantitative detection of alkaline phosphatase (ALP) and butyrylcholinesterase (BChE). Specifically, the operation of this μPAD sensing platform is based on two sequential steps. Cobalt-doped mesoporous cerium oxide (Co-m-CeO2) with remarkable peroxidase-like activities under neutral conditions first catalytically decomposes H2O2 for effectively converting colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). The subsequent addition of ALP or BChE to their respective substrates produces a reducing substance that can somewhat inhibit the oxTMB transformation for compromised colorimetric and photothermal signals of oxTMB. Notably, these two-step bioenzyme-nanozyme cascade reactions strongly support the straightforward and excellent processability of this platform, which exhibit lower detection limits for ALP and BChE with a detection limit for BChE an order of magnitude lower than those of the other reported paper-based detection methods. The practicability and efficiency of this platform are further demonstrated through the analysis of clinical serum samples. This innovative platform exhibits great potential as a facile yet robust approach for simultaneous, accurate, and on-site visual detection of multiple enzyme activities in authentic samples.

Cobalt-based hybrid nanoparticles loaded with curcumin for ligand-enhanced synergistic nanocatalytic therapy/chemotherapy combined with calcium overload

The therapeutic efficacy of Fenton or Fenton-like nanocatalysts is usually restricted by the inappropriate pH value and limited concentration of hydrogen peroxide (H2O2) at the tumor site. Herein, calcium carbonate (CaCO3)-mineralized cobalt silicate hydroxide hollow nanocatalysts (CSO@CaCO3, CC) were synthesized and loaded with curcumin (CCC). This hybrid system can simultaneously realize nanocatalytic therapy, chemotherapy and calcium overload. With the stabilization of liposomes, CCC is able to reach the tumor site smoothly. The CaCO3 shell first degrades in an acidic tumor environment, releasing Cur and Ca2+, and the pH value of the tumor is increased simultaneously. Then the exposed CSO catalyzes the Fenton-like reaction to convert H2O2 into ˙OH and enhances the cytotoxicity of curcumin (Cur) by catalytically oxidizing it to a ˙Cur radical. Curcumin not only induces the chemotherapy effect but also serves as a nucleophilic ligand and an electron donor in the catalytic system, enhancing the Fenton-like activity of CCC by electron transfer. In addition, calcium overload also amplifies the efficacy of ROS-based therapy. In vitro and in vivo results show that CCC exhibited an excellent synergistic tumor inhibition effect without any clear side effect. This work proposes a novel concept of nanocatalytic therapy/chemotherapy synergistic mechanism by the ligand-induced enhancement of Fenton-like catalytic activity, and inspires the construction of combined therapeutic nanoplatforms and multifunctional nanocarriers for drug and ion delivery in the future.

Toward Distinguishing between the Superchaotropic and Hydrophobic Characters of Nanometric-Sized Ions in Interaction with PEGylated Surfaces

In this study, we explore the superchaotropic effect of various polyoxometalate or boron cluster nano-ions on hydrophilic neutral surfaces. Nano-ions, characterized by low charge densities, exhibit strong adsorption on non-ionic hydrophilic surfaces like PEGylated micelles. This adsorption phenomenon was attributed to the enthalpically favorable dehydration of nano-ions, the so-called superchaotropic effect. Here, we investigate the adsorption of three nano-ions, α-SiW12O404-, α-PW12O403-, and B12I122-, with decreasing charge density or increasing superchaotropicity (or hydrophobicity), on hydrophilic solid surfaces, PEGylated gold nanoparticles, and PEGylated gold-coated quartz crystal. Solid surfaces are devoid of hydrophobic regions, enabling the study of the subtle nuance between hydrophobic and superchaotropic effects. Unlike adsorption on PEGylated micelles, the adsorption constant decreases with a reduced charge density, aligning with the well-established principle that hydrophobic ions do not adsorb on hydrophilic surfaces. This research improves our understanding of the subtle difference between superchaotropic and hydrophobic effects in nano-ion adsorption phenomena.

Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

S-Doping Regulated Iron Spin States in Fe-N-C Single-Atom Material for Enhanced Peroxidase-Mimicking Activity at Neutral pH

Designing biomimetic nanomaterials with peroxidase (POD)-like activity at neutral pH remains a significant challenge. An S-doping strategy is developed to afford an iron single-atom nanomaterial (Fe1@CN-S) with high POD-like activity under neutral conditions. To the best of knowledge, there is the first example on the achievement of excellent POD-like activity under neutral conditions by regulating the active site structure. S-doping not only promotes the dissociation of the N─H bond in 3,3″,5,5″-tetramethylbenzidine (TMB), but also facilitates the desorption of OH* by the transformation of iron species' spin states from middle-spin (MS FeII) to low-spin (LS FeII). Meanwhile, LS FeII sites typically have more unfilled d orbitals, thereby exhibiting stronger interactions with H2O2 than MS FeII, which can enhance POD-like activity. Finally, a one-pot visual detection of glucose at pH 7 is performed, demonstrating the best selectivity and sensitivity than previous reports.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Rapid Trace Detection of Sulfite Residue in White Wine Using a Multichannel Colorimetric Nanozyme Sensor

As a commonly used food additive, sulfite (SO32-) is popular with food manufacturers due to the functions of bleaching, sterilizing, and oxidation resistance. However, excess sulfites can pose a threat to human health. Therefore, it is particularly important to achieve rapid and sensitive detection of SO32-. Herein, a colorimetric sensor was invented for visual, meticulous, and rapid detection of SO32- based on MIL-53(Fe/Mn). Bimetallic nanozyme MIL-53(Fe/Mn) was prepared by a one-pot hydrothermal reaction. The prepared MIL-53(Fe/Mn) can effectively catalyze the oxidation of colorless TMB to a blue oxidation product (oxTMB). The introduction of SO32- causes significant discoloration of the reaction system, gradually transitioning from a visible blue color to colorless. Hence, a sensitive colorimetric sensor for SO32- detection was developed based on the decolorization degree of the detection system. Further, the discoloration was ascribed to the inactivation of nanozyme and the strong reducing ability of SO32-. Under the optimal experimental conditions, there was a good linear relationship between the absorbance at 652 nm and SO32- concentration in the linear range of 0.5-6 μg mL-1 with a limit of detection (LOD) of 0.05 μg mL-1. The developed method was successfully applied to the detection of actual samples of white wine with good accuracy and recovery. Compared to traditional methods, this colorimetric sensor produces similar detection results but significantly reduces the detection time. Compared to traditional methods, this colorimetric sensor can not only reduce the detection costs effectively but also help the food industry maintain quality standards. Strong anti-interference capability, simple operation, and low detection limits ensure the excellent performance of the colorimetric sensor in detecting SO32- in white wine. The combination of a smartphone and a colorimetric analysis application has also greatly facilitated the semi-quantitative, visual on-site detection of SO32-, which has opened up an application prospect of an MIL-53(Fe/Mn)-based detection platform. Our work has indicated a new direction for the detection of SO32- and provided important assurance for food safety.

Recent Advances in Nanozyme-Mediated Strategies for Pathogen Detection and Control

Pathogen detection and control have long presented formidable challenges in the domains of medicine and public health. This review paper underscores the potential of nanozymes as emerging bio-mimetic enzymes that hold promise in effectively tackling these challenges. The key features and advantages of nanozymes are introduced, encompassing their comparable catalytic activity to natural enzymes, enhanced stability and reliability, cost effectiveness, and straightforward preparation methods. Subsequently, the paper delves into the detailed utilization of nanozymes for pathogen detection. This includes their application as biosensors, facilitating rapid and sensitive identification of diverse pathogens, including bacteria, viruses, and plasmodium. Furthermore, the paper explores strategies employing nanozymes for pathogen control, such as the regulation of reactive oxygen species (ROS), HOBr/Cl regulation, and clearance of extracellular DNA to impede pathogen growth and transmission. The review underscores the vast potential of nanozymes in pathogen detection and control through numerous specific examples and case studies. The authors highlight the efficiency, rapidity, and specificity of pathogen detection achieved with nanozymes, employing various strategies. They also demonstrate the feasibility of nanozymes in hindering pathogen growth and transmission. These innovative approaches employing nanozymes are projected to provide novel options for early disease diagnoses, treatment, and prevention. Through a comprehensive discourse on the characteristics and advantages of nanozymes, as well as diverse application approaches, this paper serves as a crucial reference and guide for further research and development in nanozyme technology. The expectation is that such advancements will significantly contribute to enhancing disease control measures and improving public health outcomes.

Enhanced peroxidase-like activity of MOF nanozymes by co-catalysis for colorimetric detection of cholesterol

Metal-organic frameworks (MOFs) have been widely used as nanozymes with a great development prospect due to their unique advantages. It is known that the current Fe-based or Cu-based MOF, etc., exhibits the catalytic activity of nanozymes through the Fenton catalytic reaction. And the conversion efficiency of the Fe3+/Fe2+ or Cu2+/Cu+ cycle is key to the catalytic activity. Therefore, we proposed a novel co-catalytic method to promote the reaction rate of the rate-limiting step of Cu2+/Cu+ conversion in the Fenton reaction of Cu2+/H2O2 to enhance the catalytic activity of the nanozymes. As a proof of concept, the MoCu-2MI nanozyme with high catalytic activity was successfully synthesized using Mo-doped Cu-2MI (2-methylimidazole). By using 3,3',5,5'-tetramethylbenzidine (TMB) as the chromogenic substrate, MoCu-2MI exhibited higher peroxidase-like activity than pure Cu-2MI. Then, it was confirmed that the newly introduced Mo played a crucial co-catalytic role by characterizing the possible catalytic mechanism. Specifically, Mo acted as a co-catalyst to accelerate the electron transfer in the system, and then promote the Cu2+/Cu+ cycle in the Cu-Fenton reaction, which was conducive to accelerating the production of a large number of reactive oxygen species (ROS) from H2O2, and finally improve the activity. Ultimately, a biosensor platform combined with MoCu-2MI and cholesterol oxidase realized the one-step colorimetric detection of cholesterol in the range of 2-140 μM with the detection limit as low as 1.2 μM. This study provides a new strategy for regulating the activity of MOF nanozymes.

Light-activated carbon dot nanozyme with scandium for a highly efficient and pH-universal bio-nanozyme cascade colorimetric assay

Nanozyme-based colorimetric assays have attracted much attention due to their cost-effectiveness, high stability, and sensitivity. In particular, the catalytic cascade imparted by the biological enzyme is highly selective. However, developing an efficient, one-pot, and pH-universal bio-nanozyme cascade remains challenging. Considering the tunable activity of the photo-activated nanozyme, we herein demonstrated a pH-universal colorimetric assay based on the Sc³⁺-boosted photocatalytic oxidation of carbon dots (C-dots). As a strong Lewis acid, Sc³⁺ shows ultra-fast complexation with OH^- over a broad pH range and dramatically decreases the pH of the buffer solutions. In addition to regulating the pH, Sc³⁺ also binds to the C-dots to produce a persistent and strongly oxidizing intermediate based on photo-induced electron transfer. The proposed Sc³⁺-boosted photocatalytic system was successfully used in a cascade colorimetric assay with biological enzymes for assessing their activity as well as the detection of enzyme inhibitors at neutral and alkaline pH. Instead of designing new nanozymes for catalytic cascades, this work suggests that introducing promoters can be a convenient strategy in practical applications.

Amorphization-Modulated Metal Sulfides with Boosted Active Sites and Kinetics for Efficient Enzymatic Colorimetric Biodetection

Colorimetric biosensing has become a popular sensing method for the portable detection of a variety of biomarkers. Artificial biocatalysts can replace traditional natural enzymes in the fields of enzymatic colorimetric biodetection; however, the exploration of new biocatalysts with efficient, stable, and specific biosensing reactions has remained challenging so far. Here, to enhance the active sites and overcome the sluggish kinetics of metal sulfides, the creation of an amorphous RuS₂ (a-RuS₂ ) biocatalytic system is reported, which can dramatically boost the peroxidase-mimetic activity of RuS₂ for the enzymatic detection of diverse biomolecules. Due to the existence of abundant accessible active sites and mildly surface oxidation, the a-RuS₂ biocatalyst displays a twofold V_max value and much higher reaction kinetics/turnover number (1.63 × 10^-2 s^-1 ) compared to that of the crystallized RuS₂ . Noticeably, the a-RuS₂ -based biosensor shows an extremely low detection limit of H₂ O₂ (3.25 × 10^-6 m), l-cysteine (3.39 × 10^-6 m), and glucose (9.84 × 10^-6 m), respectively, thus showing superior detection sensitivity to many currently reported peroxidase-mimetic nanomaterials. This work offers a new path to create highly sensitive and specific colorimetric biosensors in detecting biomolecules and also provides valuable insights for engineering robust enzyme-like biocatalysts via amorphization-modulated design.

Porous-nanozyme-based colorimetric sensor for rapid detection of kanamycin in foods under neutral condition

Most colorimetric methods based on nanozymes need to have excellent performance under acidic condition, so they are currently facing some challenges in the field of food hazard detection. Herein, a facile and rapid colorimetric sensor for kanamycin (KAN) detection in foods under neutral condition has been designed using the peroxidase-mimic activity of porous nanozyme like Co₃ O₄ nanodisk. Further investigations showed that the interaction mechanism between porous Co₃ O₄ nanodisk and substrates belongs to a ping-pong model, and the inhibition type of KAN on the peroxidase-mimic activity is noncompetitive inhibition. The constructed sensor has good sensitivity for KAN with the limit of 57 nM, and the color changes can be discerned visually when KAN exceeds 0.5 µM. Besides, the colorimetric sensor obtains excellent recovery results in chicken serum, milk, honey, and pork, which shows that the proposed sensing strategy can provide a rapid and convenient detection method for KAN in foods under neutral condition. PRACTICAL APPLICATION: The established sensing strategy can rapidly distinguish whether KAN residue exceeds the permissible level within 10 min, which meets the requirement for on-site monitoring of antibiotics in foods, and also open up a new idea for other hazards detection under neutral condition.

Polyoxometalate functionalizing CeO2 hollow nanospheres as enhanced oxidase mimics for ascorbic acid colorimetric sensing

Phosphotungstic acid covered with CeO₂ hollow nanospheres (CeO₂@PTA HNSs) has been successfully prepared by a simple method, serving as highly efficient nanozymes for ascorbic acid (AA) colorimetric sensing. In virtue of the unique hollow nanostructures, oxide defects and synergic effects of CeO₂ and PTA, the proposed CeO₂@PTA HNSs present remarkable intrinsic oxidase-like activity and help capture electrons from 3,3',5,5'-tetramethylbenzidine (TMB). Due to the reducibility of AA, a promising colorimetric sensing platform based on CeO₂@PTA HNSs has been constructed for quantitative analysis of AA. The present colorimetric detection exhibits a low limit of detection, good selectivity and stability, as well as reliability in orange juice and milk. This work provides a simple surface defect engineering to prepare high-performance oxidase mimics in the application of colorimetric biosensing.

Amorphous Fe-Containing Phosphotungstates Featuring Efficient Peroxidase-like Activity at Neutral pH: Toward Portable Swabs for Pesticide Detection with Tandem Catalytic Amplification

Peroxidase-mimetic materials are intensively applied to establish multienzyme systems because of their attractive merits. However, almost all of the nanozymes explored exhibit catalytic capacity only under acidic conditions. The pH mismatch between peroxidase mimics in acidic environments and bioenzymes under neutral conditions significantly restricts the development of enzyme-nanozyme catalytic systems especially for biochemical sensing. To solve this problem, here amorphous Fe-containing phosphotungstates (Fe-PTs) featuring high peroxidase activity at neutral pH were explored to fabricate portable multienzyme biosensors for pesticide detection. The strong attraction of negatively charged Fe-PTs to positively charged substrates as well as the accelerated regeneration of Fe²⁺ by the Fe/W bimetallic redox couples was demonstrated to play important roles in endowing the material with peroxidase-like activity in physiological environments. Consequently, integrating the developed Fe-PTs with acetylcholinesterase and choline oxidase led to an enzyme-nanozyme tandem platform with good catalytic efficiency at neutral pH for organophosphorus pesticide response. Furthermore, they were immobilized onto common medical swabs to fabricate portable sensors for paraoxon detection conveniently based on smartphone sensing, showing excellent sensitivity, good anti-interference capacity, and low detection limit (0.28 ng/mL). Our contribution expands the horizon of acquiring peroxidase activity at neutral pH, and it will also open avenues to construct portable and effective biosensors for pesticides and other analytes.

Nanozyme's catalytic activity at neutral pH: reaction substrates and application in sensing

Nanozymes exhibit their great potential as alternatives to natural enzymes. In addition to catalytic activity, nanozymes also need to have biologically relevant catalytic reactions at physiological pH to fit in the definition of an enzyme and to achieve efficient analytical applications. Previous reviews in the nanozyme field mainly focused on the catalytic mechanisms, activity regulation, and types of catalytic reactions. In this paper, we discuss efforts made on the substrate-dependent catalytic activity of nanozymes at neutral pH. First, the discrepant catalytic activities for different substrates are compared, where the key differences are the characteristics of substrates and the adsorption of substrates by nanozymes at different pH. We then reviewed efforts to enhance reaction activity for model chromogenic substrates and strategies to engineer nanomaterials to accelerate reaction rates for other substrates at physiological pH. Finally, we also discussed methods to achieve efficient sensing applications at neutral pH using nanozymes. We believe that the nanozyme is catching up with enzymes rapidly in terms of reaction rates and reaction conditions. Designing nanozymes with specific catalysis for efficient sensing remains a challenge.

π-Conjugated Copper Phthalocyanine Nanoparticles as Highly Sensitive Sensor for Colorimetric Detection of Biomarkers

Though numerous nanomaterials with enzyme-like activities have been utilized as probes and sensors for detecting biological molecules, it is still challenging to construct highly sensitive detectors for biomarkers using polymeric materials. Benefiting from the π-d delocalization effect of electrons, excellent metal-chelating property, high electron transferability, and good chemical stability of π-conjugated phthalocyanine, the design of the copper phthalocyanine-based conjugated polymer nanoparticles (Cu-PcCP NPs) as a colorimetric sensor for a variety of biomarkers is reported. The Cu-PcCP NPs are synthesized through a simple microwave-assisted polymerization, and their chemical structures are thoroughly characterized. The colorimetric results of Cu-PcCP NPs demonstrate excellent peroxidase-like detecting activity and also great substrate selectivity than most of the reported Cu-based nanomaterials. The Cu-PcCP NPs can achieve a detection limit of 4.88 μM for the H₂ O₂ , 4.27 μM for the L-cysteine, and 21.10 μM for the glucose via a cascade catalytic system, which shows comparable detecting sensitivity as that of many earlier reported enzyme-like nanomaterials. Moreover, Cu-PcCP NPs present remarkable resistance to harsh conditions, including high temperature, low pH, and excessive salts. These highly specific π-conjugated copper-phthalocyanine nanoparticles not only overcome the current limitation of polymeric material-based sensors but also provide a new direction for designing next-generation enzyme-like nanomaterial-based colorimetric biosensors.

Modular configurations of living biomaterials incorporating nano-based artificial mediators and synthetic biology to improve bioelectrocatalytic performance: A review

Currently, the industrial application of bioelectrochemical systems (BESs) that are incubated with natural electrochemically active microbes (EABs) is limited due to inefficient extracellular electron transfer (EET) by natural EABs. Notably, recent studies have identified several novel living biomaterials comprising highly efficient electron transfer systems allowing unparalleled proficiency of energy conversion. Introduction of these biomaterials into BESs could fundamentally increase their utilization for a wide range of applications. This review provides a comprehensive assessment of recent advancements in the design of living biomaterials that can be exploited to enhance bioelectrocatalytic performance. Further, modular configurations of abiotic and biotic components promise a powerful enhancement through integration of nano-based artificial mediators and synthetic biology. Herein, recent advancements in BESs are synthesized and assessed, including heterojunctions between conductive nanomaterials and EABs, in-situ hybrid self-assembly of EABs and nano-sized semiconductors, cytoprotection in biohybrids, synthetic biological modifications of EABs and electroactive biofilms. Since living biomaterials comprise a broad range of disciplines, such as molecular biology, electrochemistry and material sciences, full integration of technological advances applied in an interdisciplinary framework will greatly enhance/advance the utility and novelty of BESs. Overall, emerging fundamental knowledge concerning living biomaterials provides a powerful opportunity to markedly boost EET efficiency and facilitate the industrial application of BESs to meet global sustainability challenges/goals.

Recent Advances in Polyoxometalates with Enzyme-like Characteristics for Analytical Applications

Artificial enzymes based on inorganic solids with both enzyme-mimetic activities and the special material features has been a promising candidate to overcome many deleterious effects of native enzymes in analytical applications. Polyoxometalates (POMs) are an importance class of molecular metal-oxygen anionic clusters. Their outstanding physicochemical properties, versatility and potential applications in energy conversion, magnetism, catalysis, molecular electronics and biomedicine have long been studied. However, the analytical applications of them is limited. Recently, the intrinsic enzymatic activities of POMs have also been found and become an area of growing interest. In this review, along with other reports, we aimed to classify the enzymatic activity of POMs, summarize the construction of POMs-based enzymes, and survey their recent advances in analytical fields. Finally, the current challenges and trends of the polyoxometalates with enzymatic activity in future chemo-/bio-sensing applications are briefly discussed.

Choline Oxidase-Integrated Copper Metal-Organic Frameworks as Cascade Nanozymes for One-Step Colorimetric Choline Detection

Choline is an important factor for regulating human health and is widely present in various foods. In this work, a sensor strategy based on a choline oxidase-integrated copper(II) metal-organic framework with peroxidase-like activity is constructed for one-step cascade detection of choline. The one-step cascade strategy can avoid intermediate product transferring in general multi-step reactions, and the multi-enzyme activities can be well exerted under one condition, thus exhibiting excellent catalytic activity and enhanced stability. In the integrated system, choline is catalyzed by ChO_x to produce betaine and H₂O₂, which eventually got converted to hydroxyl radicals by the peroxidase nanozyme, oxidized the chromogenic substrate ABTS, and produced an observable absorption peak at 420 nm. A new choline detection method was thus established and showed a satisfactory linear relationship at 6-300 μM, which has been used for the choline analysis in milk.

Nanozymes with Multiple Activities: Prospects in Analytical Sensing

Given the superiorities in catalytic stability, production cost and performance tunability over natural bio-enzymes, artificial nanomaterials featuring enzyme-like characteristics (nanozymes) have drawn extensive attention from the academic community in the past decade. With these merits, they are intensively tested for sensing, biomedicine and environmental engineering. Especially in the analytical sensing field, enzyme mimics have found wide use for biochemical detection, environmental monitoring and food analysis. More fascinatingly, rational design enables one fabrication of enzyme-like materials with versatile activities, which show great promise for further advancement of the nanozyme-involved biochemical sensing field. To understand the progress in such an exciting field, here we offer a review of nanozymes with multiple catalytic activities and their analytical application prospects. The main types of enzyme-mimetic activities are first introduced, followed by a summary of current strategies that can be employed to design multi-activity nanozymes. In particular, typical materials with at least two enzyme-like activities are reviewed. Finally, opportunities for multi-activity nanozymes applied in the sensing field are discussed, and potential challenges are also presented, to better guide the development of analytical methods and sensors using nanozymes with different catalytic features.

A portable visual coffee ring based on carbon dot sensitized lanthanide complex coordination to detect bisphenol A in water

In this work, a ratiometric fluorescence sensor along with a portable coffee ring visualized detection method for bisphenol A (BPA) was developed based on carbon dots. The probe was formed by the coordination polymerization of Eu3+ and 5'-adenosine monophosphate on the surface of carbon dots containing a large number of hydroxyl and carbonyl groups. The results showed that the fluorescence intensity ratio and the concentration of BPA had a good linear relationship in a wide range of 0.1-100 μM with a detection limit of 20 nM (S/N = 3). The recoveries of the added standard BPA in water samples ranged from 91.80 to 102.7% with relative standard deviation values no more than 1.84% (n = 3). In addition, the changes of the fluorescence color of the CDs@Eu-AMP suspension with different BPA concentrations can be easily visualized under a UV lamp by the naked eye, which highlights the great potential of the coffee ring detection method for the fast and convenient monitoring of BPA in real water samples.

Activating the Neutral pH Photozymatic Activity of g-C3N4 Nanosheet through Post-Synthetic Incorporation of Pt

The catalytic activity of photozyme can be regulated through light irradiation time and intensity, but it still suffers from low activity in physiological neutral pH (typically, pH < 5). Herein,...

Recent advancement in noninvasive glucose monitoring and closed-loop management system for diabetes

Diabetes can cause many complications, which has become one of the most common diseases that may lead to death. Currently, the number of diabetics continues increasing year by year. Thus,...

Natural Products Self-Assembled Nanozyme for Cascade Detection of Glucose and Bacterial Viability in Food

Sugar content and bacterial contamination levels are important indicators for the health and safety of food, respectively. Therefore, it is important to construct a method that can detect both glucose and bacterial activity. Herein, natural compounds (gallic acid and glucose oxidase) were assembled into nanozyme (GOx@GA-Fe (ii)) for mild cascade detection. The nanozyme catalyzes glucose to produce hydrogen peroxide, which is then converted to ·OH and oxidized colorless TMB from blue oxidized TMB. Under the optimal conditions, the method has a good linear relationship in the glucose concentration range of 1–500 μM (R² = 0.993) with minimum detection concentration of 0.43 μM. Based on the glucose consumption of bacteria metabolism, the cascade reaction was then applied to detect the viability of 5 common bacteria. As such, a cascade method based on a natural self-assembled nanozyme was fabricated to monitor the quality of food.

Iron, Nitrogen-Doped Carbon Aerogels for Fluorescent and Electrochemical Dual-Mode Detection of Glucose

Due to their effective catalytic activity and maximum atom utilization, single metal atoms dispersed in carbon matrices have found diverse applications in electrocatalysis, photocatalysis, organic catalysis, and biosensing. Herein, iron is atomically dispersed into nitrogen-doped porous carbon aerogel by a facile pyrolysis procedure, and the resulting nanocomposite behaves both as a peroxidase mimic for the sensitive detection of glucose by fluorescence spectroscopy and as an effective catalyst for the electrochemical oxidation of glucose. The glucose concentration can be quantified within the millimolar to micromolar range with a limit of detection of 3.1 and 0.5 μM, respectively. Such a dual-functional detection platform also shows excellent reproducibility, stability, and selectivity, and the performance in glucose detection of clinical and artificial human body fluids is highly comparable to that of leading assays in recent studies and results from commercial sensors. Results from this study suggest that carbon aerogel-supported single atoms can be used as a dual-functional nanozyme for the construction of low-cost, high-performance dual-signal readout platforms for glucose detection.

Selective detection of glutathione by flower-like NiV2O6 with only peroxidase-like activity at neutral pH

In view of the broad application prospect of peroxidase-like nanozymes in biomedical analysis, it is of great significance to eliminate the interference of their oxidase-like activity and enable them to work under neutral conditions. Herein, flower-like NiV₂O₆ was synthesized and their enzyme-mimicking activity was investigated. Through the regulation of pH, NiV₂O₆ nanozyme showed only peroxidase-like activity but not oxidase-like activity under neutral conditions, which could catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine into its blue product in the presence of H₂O₂. Furthermore, based on the competitive effect of glutathione (GSH) on the catalytic activity of nanozymes, a semi-quantitative/quantitative colorimetric assay was established for GSH detection by using peroxidase-like NiV₂O₆. The assay exhibited a good linear relationship in GSH concentration ranging from 3-100 μmol L^-1, with a detection limit of 0.89 μmol L^-1. Moreover, in the presence of formaldehyde as masking agent, this method showed satisfactory specificity for GSH under the interference of a variety of interfering substances and even biothiols. Concerning the practical application, the system was applied to monitor GSH level in fetal bovine serum, human serum and SiHa cells. Satisfyingly, the obtained results were consistent well with those of Ultra performance liquid chromatography (UPLC) and assay kit, indicating the constructed assay has great potential in clinical application.

Polyoxometalates in Analytical Sciences

Polyoxometalates (POMs) have been used for spectrophotometric determinations of silicon and phosphorus under acidic conditions, referred to as the molybdenum yellow method and molybdenum blue method, respectively. Many POMs are redox active and exhibit fascinating but complicated voltammetric responses. These compounds can reversibly accommodate and release many electrons without exhibiting structural changes, implying that POMs can function as excellent mediators and can be applied to sensitive determination methods based on catalytic electrochemical reactions. In addition, some rare-earth-metal-incorporated POMs exhibit fluorescence, which enables sensitive determination by the enhancement and quenching of fluorescence intensities. In this review, various analytical applications of POMs are introduced, mainly focusing on papers published after 2000, except for the molybdenum yellow method and molybdenum blue method.

A review on metal nanozyme-based sensing of heavy metal ions: Challenges and future perspectives

Large scale mining, manufacturing industries, exploitation of underground water, depletion of groundwater level, and uncontrolled discharge of industrial wastes have caused severe heavy metal ion pollution to the environment throughout the world. Therefore, the rapid detection of such toxic metal ions is inevitable. However, conventional methods require sophisticated instruments and skilled manpower and are difficult to operate in on-field conditions. Recently, metal nanozyme-based assays have been found to have the potential as an alternative to conventional methods due to their portability, simplicity, and high sensitivity to detect metal ion concentration to as low as parts per trillion (ppt). Metal nanozyme-based systems for heavy metal ions enable rapid and cheap screening on the spot with a very simple instrument such as a UV-vis absorption spectrophotometer and therefore, are convenient for use in field operations, especially in remote parts of the world. The sensing mechanism of a nanozyme-based sensor is highly dependent on its surface properties and specific interactions with particular metal ion species. Such method often encounters selectivity issues, unlike natural enzyme-based assays. Therefore, in this review, we mainly focus our discussion on different types of target recognition and inhibition/enhancement mechanisms, and their responses toward the catalytic activity in the sensing of target metal ions, design strategies, challenges, and future perspectives.

Self-assembled nanostructures of phosphomolybdate, nucleobase and metal ions synthesis and their in vitro cytotoxicity studies on cancer cell lines

The ability of the multidentate nucleobases, adenine and thymine, to coordinate polyoxometalate and metal ions leading to the formation of self-assembled nanostructures and their strong cytotoxicity toward cancer cell lines have been demonstrated. A unique synthetic approach is developed to make a series of functional nanoscale hybrid materials consisting of nucleobases (adenine and thymine) and phosphomolybdic acid (PMA) through solid state chemical reaction and self-assembly process. Adenine was protonated through its ring nitrogen, while the ketone group in thymine was protonated during the addition of PMA to these nucleobases. The self-assembled nanostructures formed as a result of the electrostatic interaction between the protonated nucleobases and polyanionic PMA. To promote the base pairing between the nucleobases, chloroaurate ions and silver ions were added to each PMA/adenine and PMA/thymine nanostructures. The complexation between the nucleobases and the added metal ions was found to drive the formation of subsequent self-assembled nanostructures. All the materials were screened for their anticancer activity against breast (MDAMB-231) and prostate (PC-3) cancer cells, and non-cancerous keratinocyte cells HaCaT. PMA/adenine/[AuCl4]- and PMA/thymine/Ag+ nanostructures were found to have strong anti-cancer activity, while PMA/adenine/Ag+, PMA/thymine/[AuCl4]-, and PMA/pdenine, PMA/thymine nanostructures did not exhibit such activity. The unique redox properties of these materials and the self-assembly of the PMA and metal ions were the major factors responsible for the cytotoxicity. This unique approach of making functional nanomaterials incorporate the nucleobase, PMA and metal ions using solid state self-assembly and their anti-cancer applications are considered to be an effective approach for the development of inorganic nucleoside analogue bio-pharmaceutical agents.

Colorimetric Detection of Salicylic Acid in Aspirin Using MIL-53(Fe) Nanozyme

The impurity of salicylic acid (SA) in aspirin is a required inspection item for drug quality control. Since free SA is significantly toxic for humans, the content determination of free SA is absolutely necessary to ensure people's health. In this work, a facile colorimetric method was developed for the detection of SA in aspirin by utilizing the MIL-53(Fe) nanozyme. As MIL-53(Fe) possesses enzyme mimicking catalytic activity, 3,3,5,5-tetramethylbenzidine (TMB) can be easily oxidized to blue-oxidized TMB (oxTMB) with the existence of H2O2. Moreover, an inhibition effect on the catalytic activity of the MIL-53(Fe) nanozyme is induced due to the specific complexation between SA and Fe3+ in the center of MIL-53(Fe), which results in a lighter color in the oxTMB. The color change of oxTMB can be seen easily by the naked eye with the addition of different concentrations of SA. Thus, a simple colorimetric platform was established for effectively monitoring SA. A good linear relationship (R 2 = 0.9990) was obtained in the concentration range of 0.4-28 μmol L-1, and the detection limit was 0.26 μmol L-1. In particular, the rationally designed system has been well-applied to the detection of SA impurity in aspirin. Satisfyingly, the detection results are highly in accord with those of HPLC. This novel colorimetric platform broadens the application prospects of nanozymes in the field of pharmaceutical analysis.

Protein-mediated wool-ball-like copper sulfide as a multifunctional nanozyme for dual fluorescence "turn-on" sensors of cysteine and silver ions

Developing a multifunctional nanozyme based biosensor with a convenient approach and high reliability is of vital interest for multiplex detection. In this study, wool-ball-like copper sulfide (WBLCS) was obtained facilely using an amphiphilic protein. The acidic amino acid residues and the amphiphilic properties of protein molecules play cooperative roles in the fabrication of hierarchical nanostructures. Unlike copper sulfide with irregular morphologies, the single component WBLCS acts as a multifunctional nanozyme possessing both superior cysteine oxidase- and peroxidase-mimicking activity. Fascinatingly, the addition of silver ions can significantly enhance the performance of the cascade system at a very low fluorescence substrate concentration. Based on this, dual fluorescence "turn on" sensors of cysteine and silver ions with extremely high sensitivity and selectivity are developed. This is the first report to explore multiple fluorescence "turn on" sensing systems based on one single nanozyme. Hence, the present finding has significant implication towards the design of superstructured nanozymes combining different multi-functionalities at the nanoscale for sensing multiplex target molecules sensitively and selectively in practice.

Bifunctional MIL-53(Fe) with pyrophosphate-mediated peroxidase-like activity and oxidation-stimulated fluorescence switching for alkaline phosphatase detection

Alkaline phosphatase (ALP) is extensively used as a clinical biomarker because of its close relevance with a variety of diseases. Thus, exploring reliable and practical methods for ALP analysis is of great significance. In the present work, we explored MIL-53(Fe) as a bifunctional platform with pyrophosphate (PPi)-mediated peroxidase-like activity and oxidation-stimulated fluorescence switching for ALP sensing. The proposed MIL-53(Fe) could exhibit favorable peroxidase-mimicking activity to catalytically decompose H2O2 to hydroxyl radicals, which had strong oxidizing ability to oxidize the terephthalic acid bridging ligand, resulting in the oxidation-stimulated turn-on fluorescence of MIL-53(Fe) itself. Due to the strong coordination interaction between PPi and Fe3+, the former with a relatively large molecular structure was able to inhibit the catalytic activity of MIL-53(Fe) via capping active Fe3+ sites, leading to the suppression of its self-fluorescence response. When ALP was present, it could hydrolyze the PPi inhibitor and restore the dual functions of MIL-53(Fe) to provide fluorescence again. With the above principle, highly sensitive and selective determination of ALP with a linear scope of 2-80 U L-1 and a detection limit down to 0.7 U L-1 was achieved. The MIL-53(Fe) was also demonstrated to be very reliable in measuring the target in human serum, indicating its great promise as an integrated tool for ALP detection in clinical practice.

Coupling Two Sequential Biocatalysts with Close Proximity into Metal-Organic Frameworks for Enhanced Cascade Catalysis

The encapsulation of multiple enzyme/nanoenzyme systems within mental-organic frameworks (MOFs) shows great promise for a myriad of practical applications. Herein, two sequential biocatalysts, oxidase and hemin, were coupled together with close proximity using a bifunctional polymer, poly(1-vinylimidazole) (PVI), and encapsulated into MOFs. As a demonstration of the power of such a protocol, glucose oxidase&PVI-hemin encapsulated in ZIF-8 showed significant enhancement of bioactivity for a cascade reaction compared to its counterpart without PVI. For the colorimetric assay of glucose, it showed a low limit of detection of 0.4 μM (S/N = 3), high selectivity, and excellent stability. Because there are numerous biocatalysts that can readily be coupled and encapsulated into MOFs, a myriad of interesting properties can be simply realized by encapsulating different sequential biocatalysts.

One-step cascade detection of glucose at neutral pH based on oxidase-integrated copper(ii) metal–organic framework composites

An integrated system was fabricated from a copper(ii) metal–organic framework (Cu-MOF) and glucose oxidase (GOx) for one-step cascade determination of glucose at neutral pH (pH = 7.0).

ATP fosters the tuning of nanostructured CeO2 peroxidase-like activity for promising antibacterial performance

Recyclable nano CeO₂ POD mimic records a K_m reduction (∼30% and ∼19.72% for TMB and H₂O₂, respectively) in 900 seconds at pH 4.5. ATP boosts catalytic feasibility in nano CeO₂ at physiological pH.

Metal–organic framework based nanozymes: promising materials for biochemical analysis

Metal–organic frameworks with enzyme-like catalytic features (MOF nanozymes) exhibit great promise in detecting various analytes with amplified signal outputs.