Biodegradable polyester unimolecular systems as emerging materials for therapeutic applications

Dendritic polymer prodrug-based unimolecular micelles for pH-responsive co-delivery of doxorubicin and camptothecin with synergistic controlled drug release effect

Combination chemotherapy has been recognized as a more powerful strategy for tumor treatment rather than the single chemotherapy. However, the interactive mechanism of the two hydrophobic chemotherapeutic drugs has not been explored by now. Aiming for a better synergistic effect, such interactive mechanism was investigated in the present work, by designing CPT@DOX-DPUTEA-PEG nanomedicine with encapsulated camptothecin (CPT) and conjugated doxorubicin (DOX). The synergistic controlled drug release effect was found for the two drugs loaded on the different sites of the dendritic polyurethane core. Synergism was achieved on the HepG2 cells with a combination index (CI) of 0.58 in the in vitro cellular experiments. The results demonstrated the promising application of the unimolecular micelles-based nanomedicine with independently loading of two hydrophobic chemotherapeutic drugs.

Polymeric Micelles as Drug Delivery System: Recent Advances, Approaches, Applications and Patents

Administering therapeutics through the oral route is a pervasive and widely approved medication administration approach. However, it has been found that many drugs show low systemic absorption when delivered through this route. Such limitations of oral drug delivery can be overcome by polymeric micelles acting as vehicles. As a result, they improve drug absorption by protecting loaded drug substances from the gastrointestinal system's hostile conditions, allowing controlled drug release at a specific site, extending the time spent in the gut through mucoadhesion, and inhibiting the efflux pump from reducing therapeutic agent accumulation. To promote good oral absorption of a weakly water-soluble medicinal drug, the loaded medicine should be protected from the hostile atmosphere of the GI tract. Polymeric micelles can be stacked with a broad assortment of ineffectively dissolvable medications, improving bioavailability. This review discusses the major mechanism, various types, advantages, and limitations for developing the polymeric micelle system and certain micellar drug delivery system applications. The primary goal of this review is to illustrate how polymeric micelles can be used to deliver poorly water-soluble medications.

Systematic Design and Study of Star-like Polymeric Prodrug Unimolecular Micelles β-CD-P[CL-co-(ACL-g-DOX)-SS-MPEG]21 by DPD Simulations

Unimolecular micelles composed of a single polymeric molecule have recently attracted significant attention in anti-cancer drug delivery due to their high thermodynamic stability and small particle sizes. Applying the prodrug strategy to unimolecular micelles may provide superior nano-drug carriers with simultaneous high stability, low drug leakage, and well-drug loading capacity. However, the formation mechanism of the unimolecular prodrug micelles, the superiority of the prodrug strategy, as well as the prodrug controlled release mechanism were scantily understood at the mesoscopic scale. In this work, dissipative particle dynamics mesoscopic simulations were employed to investigate the self-assembly behavior, formation conditions, drug distribution regularities, and the prodrug release process of the star-like polymeric prodrug unimolecular micelles formed by β-CD-P[CL-co-(ACL-g-DOX)-SS-MPEG]₂₁. A special bond-breaking script was used to accomplish the bond-breaking simulation of the grafted DOX bonds and the disulfide bonds. Results showed that to form well monodispersed and superior DOX-loaded unimolecular micelles, the polymer concentration should be well controlled at low volume fractions (≤10.59%), and the detailed molecular structure of the polymer was suggested as β-cyclodextrin-P[caprolactone-co-(amino caprolactone-g-doxorubicin)-disulfide-methyl polyethylene glycol]₂₁) (β-CD-P[CL₃₀-co-(ACL-g-DOX)₈-SS-MPEG₄₉]₂₁). By comparison with the DOX physically loaded micelles, it was found that the prodrug unimolecular micelles with DOX grafted on the polymer displayed no drug leakage and superior drug loading capacity. Simulations on the prodrug release process showed that the prodrug unimolecular micelles assembled by β-CD-P[CL₃₀-co-(ACL-g-DOX)₈-SS-MPEG₄₉]₂₁ would provide good dual pH/reduction-responsive DOX release performance.

Engineering multifunctional bioactive citrate-based biomaterials for tissue engineering

Developing bioactive biomaterials with highly controlled functions is crucial to enhancing their applications in regenerative medicine. Citrate-based polymers are the few bioactive polymer biomaterials used in biomedicine because of their facile synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, and functional groups available for modification. In recent years, various multifunctional designs and biomedical applications, including cardiovascular, orthopedic, muscle tissue, skin tissue, nerve and spinal cord, bioimaging, and drug or gene delivery based on citrate-based polymers, have been extensively studied, and many of them have good clinical application potential. In this review, we summarize recent progress in the multifunctional design and biomedical applications of citrate-based polymers. We also discuss the further development of multifunctional citrate-based polymers with tailored properties to meet the requirements of various biomedical applications.

•

Multifunctional bioactive citrate-based biomaterials have broad applications in regenerative medicine.

•

Recent advances in multifunctional design and biomedical applications of citate-based polymers are summarized.

•

Future challenge of citrate-based polymers in various biomedical applications are discussed.

Simple Preparation of Photoluminescent and Color-Tunable Polyester Resin Blended with Alkaline-Earth-Activated Aluminate Nanoparticles

A simple inorganic/organic nanocomposite was used to generate long-lasting phosphorescent pebbles for easy commercial manufacturing of smart products. An organic/inorganic nanocomposite was made from low-molecular-weight unsaturated polyester and rare-earth-activated strontium aluminum oxide nanoparticles doped with europium and dysprosium. The polyester resin was mixed with phosphorescent strontium aluminate oxide nanoparticles and methylethyl ketone peroxide as a cross-linking agent to create a viscous mixture that can be hardened in a few minutes at room temperature. Before adding the hardener catalyst, the phosphorescent strontium aluminate nanoparticles were dispersed throughout the polyester resin in a homogeneous manner to ensure that the pigment did not accumulate. Long-lasting, reversible luminescence was shown by the photoluminescent substrates. The emission was reported at 515 nm upon exciting the pebble at 365 nm. In normal visible light, both blank and luminescent pebbles had a translucent appearance. As a result of UV irradiation, the photoluminescent pebbles produced an intense green color. The three-dimensional CIE Lab (International Commission on Illumination) color coordinates and luminescence spectra were used to investigate the color changing characteristics. Photophysical characteristics, including excitation, emission, and lifetime, were also investigated. Scanning electron microscopy, wavelength-dispersive X-ray fluorescence spectroscopy, and energy-dispersive X-ray analysis were employed to report the surface morphologies and elemental content. Without impairing the pebbles' original physico-mechanical characteristics, the pebbles showed improved superhydrophobic activity. The current simple colorless long-lasting phosphorescent nanocomposite can be applied to a variety of surfaces, like ceramics, glassware, tiles, and metals.

PEGylated dendritic polyurethane as unimolecular micelles for tumor chemotherapy: Effect of molecular architecture

Unimolecular micelles have attracted intense interests as drug carriers for tumor chemotherapy owing to their superior stability in comparison with the self-assembled supramolecular ones. Among them, the dendritic polymers with the polar frameworks could favour the loading of chemotherapeutic drugs rather than the hyperbranched polymers via radical polymerization, by enhancing the interaction with drugs. While the tedious synthesis procedure for dendritic polymers could be simplified with the construction principle on urethane chemistry. Here, the PEGylated dendritic polyurethanes, Ph-DPU_Gly-PEG and Ph-DPU_TEA-PEG, were designed with glycerol or triethanolamine as monomer, respectively. The effect of the molecular architecture of the Ph-DPU-PEGs unimolecular micelles on the controlled drug releasing performance was compared. It was found that the Ph-DPU_TEA-PEG with tertiary amine as branching points could efficiently endow the pH-triggered drug release, due to its protonation.

Immobilization of lanthanide doped aluminate phosphor onto recycled polyester toward the development of long-persistent photoluminescence smart window

Smart window can be defined as switchable material whose light transmission is altered upon exposure to light, voltage, or heat. However, smart windows usually produced from expensive and breakable glass materials. Herein, transparent smart window with long-persistent phosphorescence, high optical transmittance, ultraviolet protection, rigid, high photostability and durability, and superhydrophobicity was developed from recycled polyester (PET). Recycled polyester waste (RBW) was simply immobilized with different ratios of lanthanide-doped aluminate nanoparticles (LdAN) to provide a long-persistent phosphorescent polyester smart window (LdAN@PET) with an ability to persist emitting light for extended time periods. The solid-state high temperature technique was used to prepare LdA micro-scale powder. Then, the top-down technique was applied to afford the corresponding LdA nanoparticles. Recycled shredded recycled polyester bottles were charged into a hot bath to provide a clear plastic shred bulk, which was then well-mixed with LdAN and drop-casted to provide long-persistent luminescent smart window. In order to improve the phosphor dispersion in the PET bulk, LdAN was synthesized in the nanoparticle form which was characterized utilizing transmission electron microscope (TEM). For better preparation of translucent smart window of long-persistent phosphorescent polyester, LdAN must be homogeneously dispersed in the PET matrix without agglomeration. The morphology and chemical composition were studied by infrared spectra (FT-IR), X-ray fluorescent (XRF) analysis, scanning electron microscopy (SEM), and energy-dispersion X-ray analyzer (EDS). In addition, spectral profiles of excitation and emission, and decay and lifetime were used to better understand the photoluminescence properties. The hardness properties were also investigated. The developed phosphorescent transparent polyester smart window demonstrated a color switch to intense green underneath UV irradiation and greenish-yellow under darkness as verified by CIE Lab color parameters. The afterglow polyester smart window showed an absorption wavelength at 365 nm and two phosphorescence intensities at 442 and 512 nm. An enhanced UV protection, photostability and hydrophobic activity were detected. The luminescent polyester substrates with lower LdAN ratios demonstrated rapid and reversible fluorescent photochromic activity beneath the UV light. The luminescent polyester substrates with higher LdAN contents displayed long-persistent phosphorescence afterglow. The current strategy can be simply applied for the production of smart windows, low thickness anticounterfeiting films and warning signs.

Flexible polymeric nanosized micelles for ophthalmic drug delivery: research progress in the last three years

The eye is a complex structure with a variety of anatomical barriers and clearance mechanisms, so the provision of safe and effective ophthalmic drug delivery technology is a major challenge. In the past few decades, a number of reports have shown that nano-delivery platforms based on polymeric micelles are of great interest, because of their hydrophobic core that encapsulates lipid-soluble drugs and small size with high penetration, allowing long-term drug retention and posterior penetration in the eye. Furthermore, as an ocular delivery platform, polymeric micelles not only cover the single micellar drug delivery system formed by poloxamer, chitosan or other polymers, but also include composite drug delivery systems like micelle-encapsulated hydrogels and micelle-embedded contact lenses. In this review, a number of ophthalmic micelles that have emerged in the last three years will be systematically reviewed, with a summary of and discussion on their unique advantages or unique drug delivery performance. Last but not least, the current challenges of polymeric micelle formulations in potential clinical ophthalmic therapeutic applications will also be proposed, which might be helpful for future design of ocular drug delivery formulations.

Preparation and Characterization of Narrow Size Distribution PMSQ Microspheres for High-Frequency Electronic Packaging

Polymethylsilsesquioxane (PMSQ) has become a kind of widely studied filler used in the electronic circuit board substrates due to its organic-inorganic hybrid structure, low dielectric constant, and good thermal stability, among other factors. Herein, the PMSQ microspheres were prepared by a two-step acid-base-catalyzed sol-gel method; the influences of reaction conditions including the ratio of water/methyltrimethoxysilane (MTMS), reaction temperature, concentration of the catalyst, and stirring time were systematically investigated; and the optimized reaction condition was then obtained towards a narrow particle size distribution and good sphericity. The microstructure of PMSQ microspheres was analyzed by the infrared spectrum and X-ray diffraction (XRD), which indicated that the as-prepared PMSQ had a ladder-dominant structure. The thermogravimetric analysis (TGA) demonstrated an excellent thermal stability of as-prepared PMSQ microspheres. More specifically, the dielectric constants at high frequency (1~20 GHz) of as-prepared PMSQ microspheres were measured to be about 3.7, which turned out a lower dielectric constant compared to SiO₂ powder (≈4.0). This study paves the way to further improve the performance of the electronic circuit board substrates for the application of high-frequency electronic packaging.

Recent advances in techniques for fabrication and characterization of nanogap biosensors: A review

Nanogap biosensors have fascinated researchers due to their excellent electrical properties. Nanogap biosensors comprise three arrays of electrodes that form nanometer-size gaps. The sensing gaps have become the major building blocks of several sensing applications, including bio- and chemosensors. One of the advantages of nanogap biosensors is that they can be fabricated in nanoscale size for various downstream applications. Several studies have been conducted on nanogap biosensors, and nanogap biosensors exhibit potential material properties. The possibilities of combining these unique properties with a nanoscale-gapped device and electrical detection systems allow excellent and potential prospects in biomolecular detection. However, their fabrication is challenging as the gap is becoming smaller. It includes high-cost, low-yield, and surface phenomena to move a step closer to the routine fabrications. This review summarizes different feasible techniques in the fabrication of nanogap electrodes, such as preparation by self-assembly with both conventional and nonconventional approaches. This review also presents a comprehensive analysis of the fabrication, potential applications, history, and the current status of nanogap biosensors with a special focus on nanogap-mediated bio- and chemical sonsors.

Computer Simulations on a pH-Responsive Anticancer Drug Delivery System Using Zwitterion-Grafted Polyamidoamine Dendrimer Unimolecular Micelles

Unimolecular micelles have attracted wide attention in the field of drug delivery because of their thermodynamic stability and uniform size distribution. However, their drug loading/release mechanisms at the molecular level have been poorly understood. In this work, the stability and drug loading/release behaviors of unimolecular micelles formed using generation-5 polyamidoamine-graft-poly(carboxybetaine methacrylate) (PAMAM(G5)-PCBMA) were studied by dissipative particle dynamics simulations. In addition, the unimolecular micelles formed using generation-5 polyamidoamine-graft-poly(ethyleneglycol methacrylate) (PAMAM(G5)-PEGMA) were used as a comparison. The simulation results showed that PAMAM(G5)-PCBMA can spontaneously form core-shell unimolecular micelles. The PAMAM(G5) dendrimer constitutes a hydrophobic core to load the doxorubicin (DOX), while the zwitterionic PCBMA serves as a protective shell to improve the stability of the unimolecular micelle. The DOX can be encapsulated into the cavity of PAMAM(G5) at the physiological pH 7.4. The drug loading efficiency and drug loading content showed some regularities with the increase in the drug concentration. At the acidic pH 5.0, the loaded DOX can be released gradually from the hydrophobic core. The comparison of DOX-loaded morphologies between the PAMAM(G5)-PCBMA system and PAMAM(G5)-PEGMA system showed that the former has better monodisperse stability. This work could offer theoretical guidance for the design and development of promising unimolecular micelles for drug delivery.

Biodegradable dendritic Boltorn™ nanoconstructs: A promising avenue for cancer theranostics

The family of Boltorn™ H40 dendrimers is an imperative subclass of hyperbranched biodegradable polymers (HBPs), which has received mounting attention as a result of its inimitable chemical, physical and biodegradable properties. These properties embrace three-dimensional dendrimeric nanoarchitecture to avert tanglement between polymer branches, adequate spatial cavities for increased encapsulation of guest molecules, good solubility as well as low viscosity to improve processability, and a huge number of surface functional groups for chemical manipulations. Similarly, low toxicity, non-immunogenicity, and natural biodegradation are significant and critical advantages in therapeutic applications as compared to other dendritic polymers. All these characteristics of Boltorn™ H40 are of pronounced importance for planning and developing advanced targeted cargo delivery carriers for cancer therapy. The present review highlights the applications of Boltorn™ H40 HBPs for the transport of chemotherapeutic agents to manage various types of cancers.

Comparison of Scaffolds Fabricated via 3D Printing and Salt Leaching: In Vivo Imaging, Biodegradation, and Inflammation

In this work, we prepared fluorescently labeled poly(ε-caprolactone-ran-lactic acid) (PCLA-F) as a biomaterial to fabricate three-dimensional (3D) scaffolds via salt leaching and 3D printing. The salt-leached PCLA-F scaffold was fabricated using NaCl and methylene chloride, and it had an irregular, interconnected 3D structure. The printed PCLA-F scaffold was fabricated using a fused deposition modeling printer, and it had a layered, orthogonally oriented 3D structure. The printed scaffold fabrication method was clearly more efficient than the salt leaching method in terms of productivity and repeatability. In the in vivo fluorescence imaging of mice and gel permeation chromatography of scaffolds removed from rats, the salt-leached PCLA scaffolds showed slightly faster degradation than the printed PCLA scaffolds. In the inflammation reaction, the printed PCLA scaffolds induced a slightly stronger inflammation reaction due to the slower biodegradation. Collectively, we can conclude that in vivo biodegradability and inflammation of scaffolds were affected by the scaffold fabrication method.

A Versatile Strategy for Unimolecular Micelle-Derived Hollow Polymer Nanoparticles as General Nanoreactors

We reported the synthesis of a well-defined hollow polymer nanoparticle derived from star-shaped unimolecular micelles. β-Cyclodextrin was first applied as an efficient macroinitiator to prepare a star-shaped PCL via ring-opening polymerization (ROP). Then, the star-shaped PCL was modified to be a macro-RAFT agent for photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of S-Cl monomers. The prepared unimolecular micelles can be photocross-linked under UV irradiation after a simple nucleophilic substitution reaction, which made -Cl groups to be -N₃ groups. After the selective removal of the PCL core, hollow polymer nanoparticles were achieved and exhibited to be a general nanoreactor strategy for the fabrication of nanocrystals with well-controlled architectures. Compared with unimolecular micelle templates, the nanocrystals prepared by hollow templates are absolutely pure as no polymer chains are embedded in the inorganic nanocrystals. In addition, by changing the concentration of the precursor, the structure of the nanocrystal can be changed from a normal spherical structure to a hollow structure.

Advances in amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core

Amphiphilic hyperbranched copolymers with an aliphatic hyperbranched 2,2-bis(methylol)propionic acid-based polyester core were highlighted.

Length effects of cylindrical polymer brushes on their in vitro and in vivo properties

Understanding the relationship between the morphology and biological performance of nanomaterials is very important for their biomedical applications. However, most of the published research focused on spherical systems. The biological properties of the anisotropic nanomaterials have not been studied enough. In this study, we synthesized three sets of cylindrical polymer brushes (CPBs) with different lengths (∼34, 60 and 119 nm) by taking advantage of controlled radical polymerization and Cu(i)-catalyzed alkyne-azide click chemistry. These CPBs had one-dimensional wormlike morphology, the same chemical structure and diameter, desirable water solubility, abundant amino groups and narrowly distributed lengths. These characteristics encouraged us to study length effects on their in vitro and in vivo properties. We demonstrated that longer CPBs had higher cellular uptake, lower tissue permeability, shorter blood circulation time, lower tumor accumulation and rapider body clearance than their shorter counterparts. This work might provide important guidance for the design of biomedical nanomaterials.

Light-Induced Redox-Responsive Smart Drug Delivery System by Using Selenium-Containing Polymer@MOF Shell/Core Nanocomposite

Rational design of controllable drug release systems is important for tumor treatments due to the nonspecific toxicity of many chemotherapeutics. Herein, laser or light responsive pharmaceutical delivery nanoparticles are designed, by taking the advantages of redox responsive selenium (Se) substituted polymer as shell and photosensitive porphyrin zirconium metal-organic frameworks (MOF) as core. In detail, redox cleavable di-(1-hydroxylundecyl) selenide (DH-Se), biocompatible poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) are randomly polymerized to form poly(DH-Se/PEG/PPG urethane), which is used to coat the reactive oxygen species' (ROS) producible porous porphyrin zirconium metal organization formulation (PCN-224 MOF) to form the final poly(DH-Se/PEG/PPG urethane)@MOF shell-core nanoparticle with spherical shape by emulsion approach. Interestingly, poly(DH-Se/PEG/PPG urethane)@MOF nanoparticles with loading of chemotherapeutic doxorubicin (DOX) experience a fast and controllable release, which can realize the combination of chemotherapy and photodynamic therapy upon irradiation with laser light, due to the light-triggered ROS production by MOF which further causes the cleavage of poly(DH-Se/PEG/PPG urethane) polymer chain and the release of encapsulated DOX. To the best of the authors' knowledge, this is the first design of utilizing MOF and selenium substituted polymer as controllable drug release carriers, which might be beneficial for precise chemotherapy and photodynamic therapy combination.

ROS-responsive targeting micelles for optical imaging-guided chemo-phototherapy of cancer

The combination of chemotherapy and phototherapy gives rise to a boom in cancer therapy methodology. An all-in-one nanoplatform is of particular interest for increased safety and efficacy geared toward personalized precision medicine. However, low drug loading efficiency, random dispersion and distribution without visualization are widespread concerns. Here, a reactive oxygen species (ROS) responsive drug delivery system for imaging-guided chemo-phototherapy was developed. Polymeric micelles were designed and synthesized using PTX (drug) and Cypate (fluorescence and photosensitizer) as hydrophobic segments and PEG as hydrophilic ones encapsulating PTX. Furthermore, folic acid, as a targeting moiety, was conjugated to PEG for directed drug delivery. We evaluated the ROS-responsive drug release profiles and chemo-phototherapy application in an anticancer therapy. The results suggest these biocompatible amphiphilic polymer conjugates would be promising for applications in imaging-guided chemo-phototherapy.

Mechanically Robust Hybrid POSS Thermoplastic Polyurethanes with Enhanced Surface Hydrophobicity

A series of hybrid thermoplastic polyurethanes (PUs) were synthesized from bi-functional polyhedral oligomeric silsesquioxane (B-POSS) and polycaprolactone (PCL) using 1,6-hexamethylene diisocyanate (HDI) as a coupling agent for the first time. The newly synthesized hybrid materials were fully characterized in terms of structure, morphology, thermal and mechanical performance, as well as their toughening effect toward polyesters. Thermal gravimeter analysis (TGA) and differential scanning calorimetry (DSC) showed enhanced thermal stability by 76 °C higher in decomposition temperature (Td) of the POSS PUs, and 22 °C higher glass transition temperature (Tg) when compared with control PU without POSS. Static contact angle results showed a significant increment of 49.8° and 53.4° for the respective surface hydrophobicity and lipophilicity measurements. More importantly, both storage modulus (G') and loss modulus (G'') are improved in the hybrid POSS PUs and these parameters can be further adjusted by varying POSS content in the copolymer. As a biodegradable hybrid filler, the as-synthesized POSS PUs also demonstrated a remarkable effect in toughening commercial polyesters, indicating a simple yet useful strategy in developing high-performance polyester for advanced biomedical applications.

GSH/pH dual-responsive biodegradable camptothecin polymeric prodrugs combined with doxorubicin for synergistic anticancer efficiency

GSH and pH dual-responsive camptothecin polymeric prodrugs combined doxorubicin for synergistic drug delivery to highly improved selectivity and synergy benefiting from good long-term stability, better internalization and sensitive dual-responsibility.

Complex Polymeric Architectures Self-Assembling in Unimolecular Micelles: Preparation, Characterization and Drug Nanoencapsulation

Unimolecular polymeric micelles are a class of single-molecule amphiphilic core-shell polymeric architectures, where the hydrophobic core is well stabilized by the hydrophilic shell, avoiding intermolecular core-core interactions. Multi-arm copolymers with a dendritic core, as well as hyperbranched and comb-like polymers, can form unimolecular micelles easily. In this review, examples of polymers able to form detectable unimolecular micelles will be presented, summarizing the analytical techniques used to characterize the unimolecular micelles and discriminate them from other supramolecular aggregates, such as multi-micelle aggregates. Unimolecular micelles are suitable for the nanoencapsulation of guest molecules. Compared to traditional supramolecular micelles, unimolecular micelles do not disassemble under dilution and are stable to environmental modifications. Recent examples of their application as drug delivery systems, endowed with increased stability and transport properties, will be discussed.