Bimetallic MOF-derived three-dimensional nanoflowers PdCoOx as peroxidase mimic activity for determining total antioxidant capacity

Bimetallic MOF derivatives have shown excellent performance as nano-enzymes in the field of catalysis. Herein, PdCo oxide nanoflowers with three-dimensional flower were prepared by a simple pyrolysis method on a precursor of bimetallic PdCo-MOF. PdCoOx showed excellent peroxidase mimic activity, which could significantly promote the oxidation of TMB by H2O2. Compared with CoOx, the peroxidase mimic activity of the optimized PdCoOx-300 increased by 2.41-fold. PdCoOx-300 has high affinity for TMB and H2O2 with Km values of 0.16 mM and 2.11 mM, which are only 57.03% and 36.87% of HRP, respectively. The highly specific peroxidase mimic activity is conducive to the sensitive detection of H2O2, glucose and ascorbic acid with limit of detection of 10, 100 and 10 nM, respectively. Furthermore, the total antioxidant capacity in the actual beverage samples was conducted, which showed good anti-interference ability and recovery rate.

Nanozymes: Classification and Analytical Applications - A Review

The recent discovery of a new class of nanomaterials called nanozymes, which have the action of enzymes and are thus of tremendous significance, has altered our understanding of these previously believed to be biologically inert nanomaterials. As a significant and exciting class of synthetic enzymes, nanozymes have distinct advantages over natural enzymes. They are less expensive, more stable, and easier to work with and store, making them a viable substitute. This practical advantage of nanozymes over natural enzymes reassures us about the potential of this new technology. Peroxidase-like nanozymes have been investigated for the purpose of creating adaptable biosensors via the use of molecularly imprinted polymers (MIPs) or particular bio recognition ligands, including enzymes, antibodies, and aptamers. This review delves into the distinctions between synthetic and natural enzymes, explaining their structures and analytical applications. It primarily focuses on carbon-based nanozymes, particularly those that contain both carbon and hydrogen, as well as metal-based nanozymes like Fe, Cu, and Au, along with their metal oxide (FeO, CuO), which have applications in many fields today. Analytical chemistry finds great use for nanozymes for sensing and other applications, particularly in comparison with other classical methods in terms of selectivity and sensitivity. Nanozymes, with their unique catalytic capabilities, have emerged as a crucial tool in the early diagnosis of COVID-19. Their application in nanozyme-based sensing and detection, particularly through colorimetric and fluorometric methods, has significantly advanced our ability to detect the virus at an early stage.

Gold brocade coated CoFe PBA with enhanced peroxidase-like activity for a chemiluminescent imaging immunoassay

Traditional chemiluminescence (CL) imaging immunoassays usually rely on natural enzymes as catalytic probes, which has hampered their extensive application due to the susceptibility to inactivation of natural enzymes. In response, a gold brocade coated CoFe Prussian blue analogue (CoFe PBA@Au brocade) with enhanced peroxidase-like activity was synthesized and utilized as a powerful label probe for constructing a highly sensitive CL imaging immunosensor targeting disease biomarkers with excellent performance. This research offers a universal strategy for enhancing the sensitivity of CL imaging immunoassays and further expands the application of PBA nanozymes.

Unveiling the role of inorganic nanoparticles in Earth's biochemical evolution through electron transfer dynamics

This article explores the intricate interplay between inorganic nanoparticles and Earth's biochemical history, with a focus on their electron transfer properties. It reveals how iron oxide and sulfide nanoparticles, as examples of inorganic nanoparticles, exhibit oxidoreductase activity similar to proteins. Termed "life fossil oxidoreductases," these inorganic enzymes influence redox reactions, detoxification processes, and nutrient cycling in early Earth environments. By emphasizing the structural configuration of nanoparticles and their electron conformation, including oxygen defects and metal vacancies, especially electron hopping, the article provides a foundation for understanding inorganic enzyme mechanisms. This approach, rooted in physics, underscores that life's origin and evolution are governed by electron transfer principles within the framework of chemical equilibrium. Today, these nanoparticles serve as vital biocatalysts in natural ecosystems, participating in critical reactions for ecosystem health. The research highlights their enduring impact on Earth's history, shaping ecosystems and interacting with protein metal centers through shared electron transfer dynamics, offering insights into early life processes and adaptations.

A smartphone-based colorimetric assay using Cu-tannic acid nanosheets (Cu-TA NShs) as a laccase-mimicking nanozyme for visual detection of quercetin in vegetables

The interaction of Cu-tannic acid nanosheets (Cu-TA NShs) as nanozyme in a surfactant solution of CTAB under relatively acidic conditions is shown to exhibit a catalytic effect on quercetin (Qur). This catalytic property of Cu-TA NShs, which mimics laccase enzyme with many advantages, has been applied to developing a selective colorimetric sensor for the determination of trace amounts of Qur in vegetable samples. This strategy presents a desirable linear relationship between the absorbance signal intensity and the concentrations of Qur from 0.350 to 32.09 µM with a detection limit (LOD) of 0.064 µM (S/N = 3). The feasibility of the proposed portable colorimetric sensor for in situ analysis of the real samples has been validated with the high-performance liquid chromatography (HPLC) method as reference method, and two-tailed test (t test) statistical analysis certifies good agreement between the results. This enzyme-free and sensitive naked-eye sensor with the smartphone-based color map is promising to provide technical support for the rapid and visual detection of Qur in vegetables.

Inorganic Fe-O and Fe-S oxidoreductases: paradigms for prebiotic chemistry and the evolution of enzymatic activity in biology

Oxidoreductases play crucial roles in electron transfer during biological redox reactions. These reactions are not exclusive to protein-based biocatalysts; nano-size (<100 nm), fine-grained inorganic colloids, such as iron oxides and sulfides, also participate. These nanocolloids exhibit intrinsic redox activity and possess direct electron transfer capacities comparable to their biological counterparts. The unique metal ion architecture of these nanocolloids, including electron configurations, coordination environment, electron conductivity, and the ability to promote spontaneous electron hopping, contributes to their transfer capabilities. Nano-size inorganic colloids are believed to be among the earliest 'oxidoreductases' to have 'evolved' on early Earth, playing critical roles in biological systems. Representing a distinct type of biocatalysts alongside metalloproteins, these nanoparticles offer an early alternative to protein-based oxidoreductase activity. While the roles of inorganic nano-sized catalysts in current Earth ecosystems are intuitively significant, they remain poorly understood and underestimated. Their contribution to chemical reactions and biogeochemical cycles likely helped shape and maintain the balance of our planet's ecosystems. However, their potential applications in biomedical, agricultural, and environmental protection sectors have not been fully explored or exploited. This review examines the structure, properties, and mechanisms of such catalysts from a material's evolutionary standpoint, aiming to raise awareness of their potential to provide innovative solutions to some of Earth's sustainability challenges.

Co-based Nanozymatic Profiling: Advances Spanning Chemistry, Biomedical, and Environmental Sciences

Nanozymes, next-generation enzyme-mimicking nanomaterials, have entered an era of rational design; among them, Co-based nanozymes have emerged as captivating players over times. Co-based nanozymes have been developed and have garnered significant attention over the past five years. Their extraordinary properties, including regulatable enzymatic activity, stability, and multifunctionality stemming from magnetic properties, photothermal conversion effects, cavitation effects, and relaxation efficiency, have made Co-based nanozymes a rising star. This review presents the first comprehensive profiling of the Co-based nanozymes in the chemistry, biology, and environmental sciences. The review begins by scrutinizing the various synthetic methods employed for Co-based nanozyme fabrication, such as template and sol-gel methods, highlighting their distinctive merits from a chemical standpoint. Furthermore, a detailed exploration of their wide-ranging applications in biosensing and biomedical therapeutics, as well as their contributions to environmental monitoring and remediation is provided. Notably, drawing inspiration from state-of-the-art techniques such as omics, a comprehensive analysis of Co-based nanozymes is undertaken, employing analogous statistical methodologies to provide valuable guidance. To conclude, a comprehensive outlook on the challenges and prospects for Co-based nanozymes is presented, spanning from microscopic physicochemical mechanisms to macroscopic clinical translational applications.

Co, Fe Dual-Doped MoS2 Nanosheets on Polypyrrole Microtubes as Effective Peroxidase Mimics for Glutathione Sensing

Heteroatom doping is considered an effective way to enhance the catalytic activity of MoS2 nanosheets (NSs). In the paper, dual-metal doping was proposed to incorporate Fe and Co into hierarchical MoS2 ultrathin NSs, which grew directly on polypyrrole microtubes (Fe, Co-MoS2@PPy), for the enhanced enzyme-like catalytic reaction. The particular hollow tubular structure realized effective electron transfer. The doped Fe and Co tuned the electronic architecture of the MoS2 NSs to enhance the enzyme-like catalytic activity. The abundant exposed void spaces facilitated ion diffusion/penetration between the PPy interlayer and Fe-Co doped MoS2 shell, leading to heterostructured synergistic effects. Therefore, the synthesized Fe and Co-MoS2@PPy composites showed remarkable catalytic activity. The high catalytic efficiency of Fe and Co-MoS2@PPy was confirmed with the reaction of tetramethylbenzidine (TMB) and H2O2 for visible detection. The blue color disappeared after adding glutathione (GSH). Thus, this procedure was used as a convenient way to detect GSH with a detection limit of 0.76 μM. The dual-metal-doped strategy was confirmed to improve the performance of MoS2 nanocomposites and could be used as a promising matrix for other applications, such as electrochemical energy conversion, medical diagnosis, and others.

Facile synthesis of NS-doped carbon dots as sensitive "ON-OFF-ON" fluorescent sensor for Cu2+ and GSH detection

In this paper, a novel nitrogen and sulfur co-doped carbon quantum dots (NS-CQDs) were successfully prepared by a dehydration exothermic carbonization method. The NS-CQDs exhibited uniform size distribution, splendid photostability, and bright fluorescence emission with a fluorescence quantum yield of 24.1 %. It was found that Cu2+ could quench the fluorescence at 467 nm based on the static quenching effect when Cu2+ was added to the NS-CQDs. At this time, the fluorescence sensor changed from the "ON" state to the "OFF" state. When glutathione (GSH) was further introduced into the NS-CQDs/Cu2+ system, the fluorescence intensity of NS-CQDs was amazingly restored through the coordination reaction between GSH and Cu2+. The fluorescence sensor changed from the "OFF" state to the "ON" state. Therefore, NS-CQDs as an "ON-OFF-ON" fluorescence sensor was designed for sequential detection of Cu2+ and GSH. Furthermore, this study successfully demonstrated the sensor's ability to selectively detect Cu2+ and GSH within a wide concentration range. Specifically, the detection range for Cu2+ was 0.1 μM-200.0 μM with a detection limit of 0.07 μM, while the range for GSH was 0.6 μM-180.0 μM with a detection limit of 0.1 μM. Most importantly, the NS-CQDs nanosensor could reliably monitor Cu2+ and GSH levels in human serum samples, with significant potential for practical applications.

Antioxidant Nanozymes: Mechanisms, Activity Manipulation, and Applications

Antioxidant enzymes such as catalase, superoxide dismutase, and glutathione peroxidase play important roles in the inhibition of oxidative-damage-related pathological diseases. However, natural antioxidant enzymes face some limitations, including low stability, high cost, and less flexibility. Recently, antioxidant nanozymes have emerged as promising materials to replace natural antioxidant enzymes for their stability, cost savings, and flexible design. The present review firstly discusses the mechanisms of antioxidant nanozymes, focusing on catalase-, superoxide dismutase-, and glutathione peroxidase-like activities. Then, we summarize the main strategies for the manipulation of antioxidant nanozymes based on their size, morphology, composition, surface modification, and modification with a metal-organic framework. Furthermore, the applications of antioxidant nanozymes in medicine and healthcare are also discussed as potential biological applications. In brief, this review provides useful information for the further development of antioxidant nanozymes, offering opportunities to improve current limitations and expand the application of antioxidant nanozymes.

Reactive Template-Engaged Synthesis of NiSx/MoS2 Nanosheets Decorated on Hollow and Porous Carbon Microtubes with Optimal Electronic Modulation toward High-Performance Enzyme-like Performance

As a promising cost-effective nanozyme, MoS₂ nanosheets (NSs) have been considered as a good candidate for the enzyme-like catalysis. However, their catalytic activity is still restricted by the insufficient active sites and poor conductivity, and thus, the comprehensive performances are still unsatisfactory. To address these issues, herein, we design and fabricate an intelligent tubular nanostructure of hierarchical hollow nanotubes, which are assembled by NiS_x/MoS₂ NSs encapsulated into N-doped carbon microtubes (NiS_x/MoS₂@NCMTs). The N-doped carbon microtubes (NCMTs) serve as a conductive skeleton, integrating with NiS_x/MoS₂ NSs and ensuring their well-distribution, thereby maximally exposing more active sites. Additionally, the tube-like structure is favorable for increasing the mass transfusion to ensure their excellent catalytic performance. Profiting from their component and structural advantages, the obtained NiS_x/MoS₂@NCMTs exhibit a surprisingly enhanced enzyme-like activity. Based on these, a facile colorimetric sensing platform to detect H₂O₂ and GSH has been developed. This proposed approach can be expected to synthesize a series of tubular heterostructured MoS₂-based composites, which will be widely applied in catalysis, energy storage, disease diagnosis, etc.

Sensitive acid phosphatase assay based on light-activated specific oxidase mimic activity

Acid phosphatase (ACP) is a key marker in the diagnosis of many diseases. However, exploiting a simple and sensitive sensor for the real-time quantitative analysis of ACP is still challenging. Herein, we attempted to develop a sensitive colorimetric sensing strategy for the detection of ACP based on light-activated oxidase mimic property of carbon dots (CDs). The synthesized CDs were proved to be capable of intrinsic light-activated oxidase mimic activity, which could generate reactive oxygen species to oxidize chromogenic substrate under ultraviolet light stimulation. Interestingly, this light-activated oxidase mimic behavior would be effectively suppressed by the antioxidant ascorbic acid (AA), a product from the hydrolysis of 2-phospho-L-ascorbic acid trisodium (AAP) mediated by ACP. Based on the above property, a facile and sensitive colorimetric sensing method for ACP was developed. Under the optimal conditions, the linear range for ACP 0.1-5.5 U/L, and the detection limit was 0.056 U/L. Compared with conventional nanozyme based ACP assay systems, the catalytic activity of light-activated nanozyme could be conveniently regulated by switching the light on and off, which made it easier to precisely control the extent of the reaction and ensured the accuracy of the assay. In addition, the proposed sensing system would be readout directly by the naked eye or smartphone-based RGB analysis system, and have been successfully applied to analyze diluted in diluted fetal bovine serum and urine samples spiked with ACP. All these results indicated that this approach holds good promise for future applications in clinical analysis and point-of-care (POC) biosensor platforms.

Co3O4/CoFe2O4 Hollow Nanocube Multifunctional Nanozyme with Oxygen Vacancies for Deep-Learning-Assisted Smartphone Biosensing and Organic Pollutant Degradation

Although the application of nanozymes has been widely studied, it is still a huge challenge to develop highly active and multifunctional nanozyme catalysts with a wider application prospect. Co₃O₄/CoFe₂O₄ hollow nanocubes (HNCs) with oxygen vacancies were proposed in this study, which had a porous oxide heterostructure with CoFe₂O₄ as the core and Co₃O₄ as the shell. The Co₃O₄/CoFe₂O₄ HNCs had three enzyme activities: peroxidase-like, oxidase-like, and catalase-like. Combining XPS depth profiling with density functional theory (DFT), the catalytic mechanism of peroxidase-like activity was explored in depth, which was mainly originated from ·OH produced by the synergistic effect between the outer oxygen and inner oxygen and electron transfer between Co and Fe. A colorimetry/smartphone dual sensing platform was designed based on the peroxidase-like activity. Especially, a multifunctional intelligent sensing platform based on deep learning-YOLO v3 algorithm-assisted smartphone was constructed to realize real-time and rapid in situ detection of l-cysteine, norfloxacin, and zearalenone. Surprisingly, the detection limit of norfloxacin was low at 0.015 μM, which was better than that of the newly published detection method in the field of nanozymes. Meanwhile, the detection mechanism of l-cysteine and norfloxacin was successfully investigated by in situ FTIR. In fact, it also showed outstanding applications in detecting l-cysteine in the food environment and norfloxacin in drugs. Furthermore, Co₃O₄/CoFe₂O₄ HNCs also could degrade 99.24% of rhodamine B, along with good reusability even after 10-cycle runs. Therefore, this work provided an in-depth understanding of the synergistic effect between the outer and inner oxygen in the reaction mechanism and an efficient method for establishing a deep-learning-assisted intelligent detection platform. In addition, this research also offered a good guideline for the further development and construction of nanozyme catalysts with multienzyme activities and multifunctional applications.

A novel colorimetric detection of glutathione based on stable free radical TEMPO oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via Copper(II) acetylacetonate catalysis

In this work, a new colorimetric method for the determination of Glutathione (GSH) on the basis of stable free radical 2,2,6,6 - tetramethylpiperidine - 1 - oxyl (TEMPO) oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via copper(II) acetylacetonate (Cu(acac)₂) catalysis was proposed. TEMPO was catalyzed by Cu(acac)₂ to produce TEMPO⁺, then TEMPO⁺ oxidized TMB to produce oxidized TMB (ox - TMB). The resulting ox - TMB showed blue and possessed a distinct absorption peak about 650 nm. Whereas, GSH prohibited the generation of ox - TMB through inhibiting TMB oxidation. As compared to the case that GSH was absent, significantly enhanced absorption was determined, and was proportional to GSH amount. On this basis, a qualitative and quantitative detection method of GSH with the naked eye and the microplate reader was achieved. The developed TEMPO - based method achieved GSH biosensing with improved sensitivity in a good specificity - manner. The limit of detection (LOD) was 90 μM via naked eye, and the microplate reader was 4.71 μM. And the stable free radical TEMPO possessed higher stability and lower toxicity than traditional oxidant of H₂O₂. Moreover, this TEMPO - based method achieved good results in the detection of GSH in human serums.

ε-Polylysine-Based Macromolecules with Catalase-Like Activity to Accelerate Wound Healing by Clearing Bacteria and Attenuating Inflammatory Response

Wound healing has remained a critical challenge due to its susceptibility to bacterial infection and the unique biological inflammatory response. Safe and effective therapeutics are still lacking. Biodegradable macromolecules (ε-polylysine-g-ferrocene, EPL-g-Fc) were developed to accelerate wound healing by combating bacterial infection and attenuating inflammatory responses. The biodegradable macromolecules were prepared via a Schiff-based reaction between ferrocene carboxaldehyde (Fc) and ε-polylysine (EPL). Through the synergistic combination of positive-charged EPL and π-π stacked Fc, the macromolecules possess excellent antibacterial activities. EPL-g-Fc with catalase-like activity could modulate the oxidative microenvironment in mammalian cells and zebrafish by catalyzing H₂O₂ into H₂O and O₂. EPL-g-Fc could alleviate inflammatory response in vitro. Furthermore, the macromolecules could accelerate bacteria-infected wound healing in vivo. This work provides a versatile strategy for repairing bacteria-infected wounds by eliminating bacteria, modulating oxidative microenvironment, and alleviating inflammatory response.

Switching on-off-on colorimetric sensor based on Fe-N/S-C single-atom nanozyme for ultrasensitive and multimodal detection of Hg2

Single-atom nanozymes (SAzymes) as a new class of efficient nanozymes have attracted extensive research interest due to their high catalytic activity and specificity. However, it is challenging to develop a novel nanoenzyme with high activity, good stability and reproducibility. In this paper, the nitrogen and sulfur coordinated Fe-N/S-C SAzymes were synthesized using peanuts shells as carbon, nitrogen and sulfur source. It shows high oxidase-like activities due to the doping of S induced geometric and electronic effects, which is further confirmed by density functional theory calculations. The prepared Fe-N/S-C SAzymes with the remarkable oxidase-mimicking activity could oxidize TMB to blue oxTMB, but the GSH can inhibit the oxidation of TMB resulting in blue fading. However, when Hg²⁺ is added into above system, Hg²⁺-SH complexes are generated attributed to a high affinity between GSH and Hg²⁺, ultimately leading to blue recovery. Based on this phenomenon, we constructed a novel "on-off-on" colorimetric sensor for the simultaneous detection of GSH (off) and Hg²⁺ (on), and the signal is acquired by various modes such as naked eye, UV-Vis spectrometer and smartphone. The colorimetric detection mode based on a smartphone showed a good linear response from 10 to 80 μM for GSH with a detection limit of 3.92 μM, and for Hg²⁺ with a linear range of 1 nM-10 μM and LOD of 0.17 nM, which is more suitable for routine laboratory applications. More importantly, the proposed colorimetric sensor has been successfully applied to the detection of GSH and Hg²⁺ in real samples with good analytical performance. This work not only provides a simple and cost-effective method to detect GSH and Hg²⁺ but also makes a certain contribution to environmental protection.

Colorimetric and ratiometric fluorescent dual-mode sensitive detection of Hg2+ based on UiO-66-NH2@Au composite

A colorimetric and ratiometric fluorescent dual-mode assay is constructed for sensitive and specific Hg²⁺ sensing based on UiO-66-NH₂ and Au composite (UiO-66-NH₂@Au). The addition of Hg²⁺ stimulates the peroxidase-like activity of UiO-66-NH₂@Au by the formation of Au-Hg amalgam, promoting the oxidizing of chromogenic substrate OPD to DAP with the aid of H₂O₂, which lead to the change of colorimetric and fluorescent signals. The absorbance of the sensing system at 450 nm is linear positive correlation with Hg²⁺ concentration of 30-1400 nM and the color of the solution under visible light shaded from light yellow to dark yellow. With the increase of Hg²⁺ concentration, the fluorescence signal at 570 nm (DAP) increased whereas that at 455 nm (intrinsic fluorescence of UiO-66-NH₂) decreased due to inner filter effect (IFE), the fluorescence intensity ratio (F₄₅₅/F₅₇₀) decreasing linearly with Log [Hg²⁺] over the range 60-1700 nM; the fluorescence emission of sensing system under UV excitation changed from blue to yellow, which can easily be discerned visually. This assay was successfully applied to the determination of Hg²⁺ in tap water and river water. The results indicate that the colorimetric and ratiometric fluorescent dual-mode assay based on UiO-66-NH₂@Au realized visual determination of Hg²⁺ rapidly and reliably, revealed application prospect in Hg²⁺ monitoring.

Metal-organic framework as a mimetic enzyme with excellent adaptability for sensitive chemiluminescence detection of glutathione in cell lysate

A novel [Co(L)(H₂O)₂] (1) was obtained by hydrothermal method and it exhibited a 1D chain with exposed carboxyl groups, the unique coordination mode made it have unusual physical and chemical stability. Meanwhile, 1 showed peroxidase-like and weak oxidase-like activity. 1 as a peroxidase mimic enzyme had an excellent affinity for the substrates luminol and H₂O₂. Compared with HRP, 1 had catalytic activity in a wide pH range and showed the best catalytic activity at pH 7.4. Meanwhile, the catalysis process of 1 was reversible and recyclable, and the catalytic activity remained stable after different pH and temperatures and long-time storage. Based on the inhibition of glutathione on luminol-H₂O₂-MOF 1 chemiluminescence signal, a chemiluminescence method for the determination of glutathione has been proposed with high sensitivity and selectivity and had been applied for detecting glutathione in cell lysate with satisfactory results.

Hierarchical flower-like manganese oxide/polystyrene with enhanced oxidase-mimicking performance for sensitive colorimetric detection of glutathione

Glutathione (GSH) is an important antioxidant and free radical scavenger that converts harmful toxins into harmless substances and excretes them out of the body. In this paper, 3D hierarchical flower-like nanozyme named MnO₂/PS (polystyrene) was successfully prepared by template method for the first time. After the systematical studies, MnO₂/PS nanozyme was evaluated to possess favorable oxidase activity and direct 3,3',5,5'-tetramethylbenzidine (TMB) catalytic ability in the near-neutral environment at room temperature. With the addition of different concentrations of GSH, oxidized TMB can be reduced to TMB with the whole process from blue to nearly colorless be observed by naked eyes. In addition, there is a good linear relationship in the range 1-50 μM and a detection limit of 0.08 μM. The method proposed can be successfully applied to the detection of reduced GSH in tablets and injections with good selectivity and high sensitivity. The analysis results exhibited good consistency with the results obtained by HPLC.

Determination of catechin and glutathione using copper aspartate nanofibers with multiple enzyme-like activities

Copper aspartate nanofibers were facilely prepared based on aspartic acid and copper (CuAsp nanofibers). It is found that the prepared CuAsp nanofibers have catalytic activities of five enzymes, including peroxidase, laccase, catalase, ascorbate oxidase, and superoxide dismutase mimetic activities. The kinetic and catalytic properties of CuAsp nanofibers were systematically investigated, showing their high catalytic activity, excellent stability, and reusability. The laccase mimetic activity of nanofibers could be used to detect catechin in the range 20-1200 µM with a detection limit of 5.88 µM. In addition, a sensing platform for glutathione with a detection limit of 0.25 µM and a detection range of 1-50 µM was established based on CuAsp nanofibers which have the peroxidase-mimicking activity. The sensor had good selectivity and could detect glutathione in actual samples of human serum. Therefore, CuAsp nanofibers with multi-enzyme activity have broad application prospects such as biosensing, environmental management, and disease diagnosis.

Facile in situ microwave synthesis of Fe3O4@MIL-100(Fe) exhibiting enhanced dual enzyme mimetic activities for colorimetric glutathione sensing

In recent decades, artificial nanozymes with excellent stability, low cost and availability have been gradually explored to avoid the limits of natural enzymes such as poor stability, high cost and difficult preparation. Herein, for the first time, we investigated the capability of nanoscale Fe₃O₄@MIL-100(Fe) as a nanozyme, which was quickly synthesized in situ by a microwave-assisted method within 20 min using Fe₃O₄ as the metal precursor. The obtained Fe₃O₄@MIL-100(Fe) showed satisfactory intrinsic dual enzyme mimetic activities, including peroxidase (POD)- and catalase (CAT)-like activities. Moreover, a simple and effective colorimetric biosensor was fabricated to detect glutathione (GSH) based on its POD-like activity. The proposed measurement had a linear range of 1-45 μM and a limit of detection (LOD) of 0.26 μM (3.3 δ/S). It was proved that the established colorimetric sensing system could be successfully applied to detect GSH in actual biological samples. Importantly, the outstanding reusability and stability made it extremely valuable as a catalyst. The present work implied that Fe₃O₄@MIL-100(Fe) synthesized in situ by the microwave-assisted method was a very promising candidate for biocatalyst and biosensing.

Nanozymes in Point-of-Care Diagnosis: An Emerging Futuristic Approach for Biosensing

Nanomaterial-based artificial enzymes (or nanozymes) have attracted great attention in the past few years owing to their capability not only to mimic functionality but also to overcome the inherent drawbacks of the natural enzymes. Numerous advantages of nanozymes such as diverse enzyme-mimicking activities, low cost, high stability, robustness, unique surface chemistry, and ease of surface tunability and biocompatibility have allowed their integration in a wide range of biosensing applications. Several metal, metal oxide, metal-organic framework-based nanozymes have been exploited for the development of biosensing systems, which present the potential for point-of-care analysis. To highlight recent progress in the field, in this review, more than 260 research articles are discussed systematically with suitable recent examples, elucidating the role of nanozymes to reinforce, miniaturize, and improve the performance of point-of-care diagnostics addressing the ASSURED (affordable, sensitive, specific, user-friendly, rapid and robust, equipment-free and deliverable to the end user) criteria formulated by World Health Organization. The review reveals that many biosensing strategies such as electrochemical, colorimetric, fluorescent, and immunological sensors required to achieve the ASSURED standards can be implemented by using enzyme-mimicking activities of nanomaterials as signal producing components. However, basic system functionality is still lacking. Since the enzyme-mimicking properties of the nanomaterials are dictated by their size, shape, composition, surface charge, surface chemistry as well as external parameters such as pH or temperature, these factors play a crucial role in the design and function of nanozyme-based point-of-care diagnostics. Therefore, it requires a deliberate exertion to integrate various parameters for truly ASSURED solutions to be realized. This review also discusses possible limitations and research gaps to provide readers a brief scenario of the emerging role of nanozymes in state-of-the-art POC diagnosis system development for futuristic biosensing applications.

Graphene encapsuled Ru nanocrystal with highly-efficient peroxidase-like activity for glutathione detection at near-physiological pH

A novel nanozyme comprised of graphene encapsuled Ru nanocrystals (Ru@G) with effective and stable peroxidase-like activity prepared using a chemical vapor deposition (CVD) method was used for the detection of glutathione at near-physiological pH.

2D bimetallic Ni/Fe MOF nanosheet composites as a peroxidase-like nanozyme for colorimetric assay of multiple targets

In this contribution, 2D Ni/Fe MOF nanosheets were synthesized by a simple two-step ultrasound strategy at room temperature, i.e. the 2D Ni-MOF with a lamellar structure was first synthesized by the top-down ultrasonic assisted stripping route, followed by introducing Fe3+ ions as a metal node and terephthalic acid as an organic ligand to form 2D Ni/Fe MOF nanosheets that exhibited weak oxidase-like and strong peroxidase-like properties. Relative to that of the single metal Ni-MOF and Fe-MOF, the peroxidase-mimicking capability of the 2D Ni/Fe MOF nanosheets increased by over 14-fold and 3-fold, respectively. Reactive oxygen trials indicated that the 2D Ni/Fe MOF nanosheets can efficiently catalyze the decomposition of H2O2 to generate the ˙OH and O2˙- radicals, which can oxidize TMB to oxTMB from colorless to blue. The kinetic trial demonstrated the high affinity of the 2D Ni/Fe MOF nanosheet to H2O2 with a Km of 0.037 mM, which was 100 times lower than that of HRP. These impressive characteristics are likely related to the good dispersion of the in situ formed Fe MOF in the 2D Ni-MOF nanosheet structure with coordinatively unsaturated metal sites. This allows the 2D Ni/Fe MOF nanosheets to expose more active metal sites and to enhance the intrinsic catalytic activity of each site due to the synergistic interaction between the two metals. Interestingly, glutathione can obviously restrict the peroxidase-like activity of the 2D Ni/Fe MOF nanosheet, while the inhibited TMB oxidation can be restored upon further introducing Hg2+ ions due to the high and specific affinity of Hg2+ to thiol groups in glutathione. Based on the above facts, the 2D Ni/Fe MOF nanozyme was used to construct a nanoplatform to determine multiple targets, i.e. H2O2, glutathione and Hg2+. The 2D Ni/Fe MOF nanozyme-based colorimetric assay exhibits a linear response to H2O2, glutathione and Hg2+ ions over the 0.01-100 μM, 0.02-100 μM, and 100 nM to 200 μM ranges, respectively. The limits of detection (3σ) for the determination of H2O2, glutathione and Hg2+ are 10 nM, 10 nM, and 100 nM, respectively. This method was used to determinate the content of Hg2+ ions in real water samples.

Nanozyme based on CoFe2O4 modified with MoS2 for colorimetric determination of cysteine and glutathione

A nanozyme based on CoFe₂O₄ modified with MoS₂ was constructed for colorimetric determination of cysteine (Cys) and glutathione (GSH). Firstly, ferrite CoFe₂O₄ is synthesized, and it is then modified by MoS₂ to form a flower-like polymer (MoS₂@CoFe₂O₄). In the presence of H₂O₂, a redox interaction takes place, and the resulting hydroxyl promoted a colorimetric conversion from colorless to blue in the presence of 3,3',5,5'-tetramethylbenzidine (TMB). However, once Cys or GSH is added, they are capable to compete with the interaction of the hydroxyl with TMB, resulting in an inhibition of the colorimetric conversion. The colorimetric distinction is sensitive to the amount of target. The results obtained proved that the catalytic efficiency of MoS₂@CoFe₂O₄ is 4.4-fold and 1.8-fold to that of MoS₂ and CoFe₂O₄. Meanwhile, the K_m values to TMB and H₂O₂ are 0.067 and 0.048 mM, respectively, which are 6.5-fold and 77-fold, respectively smaller than those of natural peroxidase such as HPR. This indicates that the MoS₂@CoFe₂O₄ possesses a favorable interaction affinity. Additionally, the colorimetric distinction caused by the competition between TMB and cysteine or glutathione is obvious. The signal responses to cysteine and glutathione are linear in the range 0.5~15 μM and 0.5~35 μM, and the LODs are 0.10 and 0.21 μM, respectively. In practical assay of Cys in serum, the RSD of the sample tests is 4.6%, and the recoveries for the spiked assays are 95.3% and 96.0% with the RSD of 2.1% and 4.2%, respectively.

A review on metal nanozyme-based sensing of heavy metal ions: Challenges and future perspectives

Large scale mining, manufacturing industries, exploitation of underground water, depletion of groundwater level, and uncontrolled discharge of industrial wastes have caused severe heavy metal ion pollution to the environment throughout the world. Therefore, the rapid detection of such toxic metal ions is inevitable. However, conventional methods require sophisticated instruments and skilled manpower and are difficult to operate in on-field conditions. Recently, metal nanozyme-based assays have been found to have the potential as an alternative to conventional methods due to their portability, simplicity, and high sensitivity to detect metal ion concentration to as low as parts per trillion (ppt). Metal nanozyme-based systems for heavy metal ions enable rapid and cheap screening on the spot with a very simple instrument such as a UV-vis absorption spectrophotometer and therefore, are convenient for use in field operations, especially in remote parts of the world. The sensing mechanism of a nanozyme-based sensor is highly dependent on its surface properties and specific interactions with particular metal ion species. Such method often encounters selectivity issues, unlike natural enzyme-based assays. Therefore, in this review, we mainly focus our discussion on different types of target recognition and inhibition/enhancement mechanisms, and their responses toward the catalytic activity in the sensing of target metal ions, design strategies, challenges, and future perspectives.

Fabrication of Bovine Serum Albumin@Au Particles for Colorimetric Detection of Glutathione

Abnormal concentrations of glutathione (GSH) are important indicators of many human diseases such as cancers, liver damage, AIDS, and Alzheimer's disease. In this work, a kind of bovine serum albumin (BSA)@Au core-shell particles were fabricated using 110 nm BSA aggregates as a template, onto which gold shells composed of Au nanoparticles (NPs) were grown through a seeded growth approach. The morphology of the Au shells deposited on BSA aggregates was tuned from sparse to dense distribution of Au NPs by increasing the concentration of silver ions contained in the growth solutions. Surface plasmon resonance (SPR) peaks of BSA@Au particles were tunable in the range from 550 to 620 nm, corresponding to evolution in color from red to blue due to the enhanced plasmonic coupling among the Au NPs in the shell. The blue BSA@Au particles were qualified for colorimetric detection of GSH since GSH may act as a swelling agent for BSA@Au particles by breaking the intermolecular disulfide bonds in BSA aggregates. With an increased amount of GSH presented, the color of BSA@Au particles evolved from blue to red attributed to gradual swelling of BSA@Au particles and thus increased the distance among the Au NPs in the shell, which was readily recognized by naked eyes or recorded by ultraviolet-visible (UV-vis) spectroscopy. This colorimetric method exhibited good selectivity and anti-interference capability in the analysis of GSH in real samples. In addition, a solid sensing system for the detection of GSH was designed and fabricated by dispersing BSA@Au particles into an agarose hydrogel.

Glutathione detection in human serum using gold nanoparticle decorated, monodisperse porous silica microspheres in the magnetic form

A nanozyme for glutathione (GSH) detection in a broad concentration range was synthesized. GSH is usually detected up to an upper limit of 100 μM using current noble metal nanozymes due to the sharp decrease in the colorimetric response with the increasing GSH concentration. Strong inhibition of colorimetric reactions by GSH adsorbed onto noble metal based nanozymes in the form of non-porous, nanoscale particulate materials dispersed in an aqueous medium is the reason for the sharp decrease in the colorimetric response. In the present study, a new magnetic nanozyme synthesized by immobilization of Au nanoparticles (Au NPs) on magnetic, monodisperse porous silica microspheres (>5 μm) obtained by a "staged-shape templating sol-gel protocol" exhibited peroxidase-like activity up to a GSH concentration of 5000 μM. A more controlled linear decrease in the peroxidase-like activity with a lower slope with respect to that of similar nanozymes was observed with the increasing GSH concentration. The proposed design allowed the GSH detection in a broader concentration range depending on the adsorption of GSH onto the Au NPs immobilized on magnetic, monodisperse porous silica microspheres. A calibration plot allowing the detection of GSH in a broad concentration range up to 3300 μM was obtained using the magnetic nanozyme. The GSH concentration was also determined in human serum by elevating the upper detection range and adjusting the sensitivity of detection via controlling the nanozyme concentration.

Enhancement of the Peroxidase-Like Activity of Iodine-Capped Gold Nanoparticles for the Colorimetric Detection of Biothiols

A colorimetric assay was developed for the detection of biothiols, based on the peroxidase-like activity of iodine-capped gold nanoparticles (AuNPs). These AuNPs show a synergetic effect in the form of peroxidase-mimicking activity at the interface of AuNPs, while free AuNPs and iodine alone have weak catalytic properties. Thus, iodine-capped AuNPs possess good intrinsic enzymatic activity and trigger the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), leading to a change in color from colorless to yellow. When added to solution, biothiols, such as cysteine, strongly bind to the interface of AuNPs via gold-thiol bonds, inhibiting the catalytic activity of AuNPs, resulting in a decrease in oxidized TMB. Using this strategy, cysteine could be linearly determined, at a wide range of concentrations (0.5 to 20 μM), with a detection limit of 0.5 μM using UV-Vis spectroscopy. This method was applied for the detection of cysteine in diluted human urine.

Fe(III) bipyridyl or phenanthroline complexes with oxidase-like activity for sensitive colorimetric detection of glutathione

In this study, three types of Fe(III) bipyridyl or phenanthroline (Fe(III)-L₃ ) complex could directly catalyze 3,3',5,5'-tetramethylbenzidine (TMB) to induce blue chromogenic changes without H₂ O₂ . Fe(III)-L₃ complex could induce a colour change in TMB directly after a short incubation time. Due to the high oxidase-like activity of the Fe(III)-L₃ complexes, superoxide anion radicals (O₂ ^•- ) were formed in solution. Intermediates radical involving oxo-iron species were then produced that oxidized TMB to its oxidation products (oxTMB), which had an absorbance maximum at 652 nm. Glutathione (GSH) could inhibit the oxidation reaction of the Fe(III)-L₃ complex-TMB system, a rapidly colorimetric method was established for the specific detection of GSH that had a detection limit of 0.1 μM. Furthermore, Fe(III)-L₃ complexes could catalyze TMB to oxTMB directly without H₂ O₂ . This fast and simple colorimetric method may open a new avenue for application in the point-of-care diagnosis field using the TMB chromogenic system.

Colorimetric assay for the sensitive detection of phosphate in water based on metal–organic framework nanospheres possessing catalytic activity

For the first time, the inhibition of the catalytic activity of Cu-MOF caused by phosphate was used for phosphate detection.

Revealing the Intrinsic Peroxidase-Like Catalytic Mechanism of Heterogeneous Single-Atom Co-MoS2

The single-atom nanozyme is a new concept and has tremendous prospects to become a next-generation nanozyme. However, few studies have been carried out to elucidate the intrinsic mechanisms for both the single atoms and the supports in single-atom nanozymes. Herein, the heterogeneous single-atom Co-MoS₂ (SA Co-MoS₂) is demonstrated to have excellent potential as a high-performance peroxidase mimic. Because of the well-defined structure of SA Co-MoS₂, its peroxidase-like mechanism is extensively interpreted through experimental and theoretical studies. Due to the different adsorption energies of substrates on different parts of SA Co-MoS₂ in the peroxidase-like reaction, SA Co favors electron transfer mechanisms, while MoS₂ relies on Fenton-like reactions. The different catalytic pathways provide an intrinsic understanding of the remarkable performance of SA Co-MoS₂. The present study not only develops a new kind of single-atom catalyst (SAC) as an elegant platform for understanding the enzyme-like activities of heterogeneous nanomaterials but also facilitates the novel application of SACs in biocatalysis.

Nanoceria as a DNase I mimicking nanozyme

We herein communicate the DNase I like activity of nanoceria (CeO2 nanoparticles). Both CeO2 and DNase I cleave polyadenine (poly-A) DNA down to ∼5-mer fragments as the major products, although further cleavage to even shorter fragments was observed with CeO2. Mass spectrometry indicates a hydrolytic cleavage mechanism instead of oxidative cleavage.

Dual role of BSA for synthesis of MnO2 nanoparticles and their mediated fluorescent turn-on probe for glutathione determination and cancer cell recognition

A MnO₂ nanoparticle (MnO₂ NP)-mediated fluorescent turn-on probe for sensitively and selectively detecting glutathione (GSH) and recognizing cancer cells was established in this work. MnO₂ NPs were synthesized simply and quickly through an in situ redox reaction by mixing bovine serum albumin (BSA) and KMnO₄, in which BSA served the dual roles of template and reductant. It was found that the MnO₂ NPs served as an effective energy acceptor and quenched the fluorescence intensity of carbon dots (CDs), owing to the fluorescence resonance energy transfer (FRET) process. Further, the addition of GSH triggered the decomposition of MnO₂, breaking the FRET between MnO₂ NPs and CDs and thus restoring the fluorescence intensity of CDs. Based on this mechanism, quantitative determination of GSH was performed. Under optimal conditions, a satisfactory linear range of 0.05-90 μM and limit of detection of 39 nM were obtained, and GSH content in human serum samples was detected. Moreover, taking advantage of the higher levels of GSH in cancer cells than in normal cells, the MnO₂ NP-CD probe was applied to distinguish SMMC-7721 cancer cells from L02 normal cells. The FRET was interrupted by GSH in cancer cells, and strong fluorescence was observed. This work provides a facile approach for synthesizing MnO₂ NPs, and this rapid, low-cost method with no need for reductants makes synthesis green and convenient. The MnO₂ NP-mediated fluorescent turn-on response to GSH could improve the MnO₂ nanomaterial-based biochemical analysis applications.

Nitro-functionalized metal–organic frameworks with catalase mimic properties for glutathione detection

Herein, four copper-based metal–organic frameworks were synthesized to investigate the effects of the substituents in ligands on the enzyme-like catalytic activity of these frameworks.