A COOH-terminated nitrogen-doped carbon aerogel as a bulk electrode for completely selective two-electron oxygen reduction to H2O2

Chemical and engineering bases for green H2O2 production and related oxidation and ammoximation of olefins and analogues

Plastics, fibers and rubber are three mainstream synthetic materials that are essential to our daily lives and contribute significantly to the quality of our lives. The production of the monomers of these synthetic polymers usually involves oxidation or ammoximation reactions of olefins and analogues. However, the utilization of C, O and N atoms in current industrial processes is <80%, which represents the most environmentally polluting processes for the production of basic chemicals. Through innovation and integration of catalytic materials, new reaction pathways, and reaction engineering, the Research Institute of Petroleum Processing, Sinopec Co., Ltd. (RIPP) and its collaborators have developed unique H2O2-centered oxidation/ammoximation technologies for olefins and analogues, which has resulted in a ¥500 billion emerging industry and driven trillions of ¥s' worth of downstream industries. The chemical and engineering bases of the production technologies mainly involve the integration of slurry-bed reactors and microsphere catalysts to enhance H2O2 production, H2O2 propylene/chloropropylene epoxidation for the production of propylene oxide/epichlorohydrin, and integration of H2O2 cyclohexanone ammoximation and membrane separation to innovate the caprolactam production process. This review briefly summarizes the whole process from the acquisition of scientific knowledge to the formation of an industrial production technology by RIPP. Moreover, the scientific frontiers of H2O2 production and related oxidation/ammoximation processes of olefins and analogues are reviewed, and new technological growth points are envisaged, with the aim of maintaining China's standing as a leader in the development of the science and technologies of H2O2 production and utilization.

Electronic Metal-Support Interactions Boost *OOH Intermediate Generation in Cu/In2Se3 for Electrochemical H2O2 Production

Two-electron oxygen reduction reaction (2e- ORR) is a promising method for the synthesis of hydrogen peroxide (H2O2). However, high energy barriers for the generation of key *OOH intermediates hinder the process of 2e- ORR. Herein, we prepared a copper-supported indium selenide catalyst (Cu/In2Se3) to enhance the selectivity and yield of 2e- ORR by employing an electronic metal-support interactions (EMSIs) strategy. EMSIs-induced charge rearrangement between metallic Cu and In2Se3 is conducive to *OOH intermediate generation, promoting H2O2 production. Theoretical investigations reveal that the inclusion of Cu significantly lowers the energy barrier of the 2e- ORR intermediate and impedes the 4e- ORR pathway, thus favoring the formation of H2O2. The concentration of H2O2 produced by Cu/In2Se3 is ~2 times than In2Se3, and Cu/In2Se3 shows promising applications in antibiotic degradation. This research presents a valuable approach for the future utilization of EMSIs in 2e- ORR.

Efficient degradation of 2,4-dichlorophenol by heterogeneous electro-Fenton using bulk carbon aerogels modified in situ with FeCo-LDH as cathodes: Operational parameters and mechanism exploration

In this study, an in situ grown FeCo-Layered double hydroxide anchored to the surface of a bulk carbon aerogel (FeCo-LDH/CA) for contaminant degradation during the heterogeneous electro-Fenton (EF) process. The results exhibited that the FeCo-LDH/CA cathode achieved 100% of 2,4-dichlorophenol (2,4-DCP = 20 mg/L) degradation within 120 min at pH = 3, application current 20 mA, and Na2SO4 concentration 0.05 M. Moreover, the degradation efficiency was impressive in the range of pH = 2-9. The coexistence of the Fe (III)/Fe (II) and Co (III)/Co (II) as active sites on the cathode surface promoted the in-situ decomposition of H2O2 to form reactive oxygen species (ROS). •OH and O2- were confirmed to be the major degradation pollutants of ROS. Furthermore, density functional theory (DFT) was used to predict the reaction sites of 2,4-DCP, and its possible degradation pathways were proposed. The toxicity of intermediate products was evaluated and decreased after degradation. In addition, the eight cycle experiments and the degradation of other typical contaminants demonstrated the satisfactory stability and applicability of the synthetic cathode. This study presents the preparation of an efficient and stable EF cathode, further promoting the application of iron-based composites in wastewater treatment.

Tailoring the Atomic-Local Environment of Carbon Nanotube Tips for Selective H2 O2 Electrosynthesis at High Current Densities

The atomic-local environment of catalytically active sites plays an important role in tuning the activity of carbon-based metal-free electrocatalysts (C-MFECs). However, the rational regulation of the environment is always impeded by synthetic limitations and insufficient understanding of the formation mechanism of the catalytic sites. Herein, the possible cleavage mechanism of carbon nanotubes (CNTs) through the crossing points during ball-milling is proposed, resulting in abundant CNT tips that are more susceptible to be modified by heteroatoms, achieving precise modulation of the atomic environment at the tips. The obtained CNTs with N,S-rich tips (N,S-TCNTs) exhibit a wide potential window of 0.59 V along with H2 O2 selectivity for over 90.0%. Even using air as the O2 source, the flow cell system with N,S-TCNTs catalyst attains high H2 O2 productivity up to 30.37 mol gcat. -1  h-1 @350 mA cm-2 , superior to most reported C-MFECs. From a practical point of view, a solid electrolyzer based on N,S-TCNTs is further employed to realize the in-situ continuous generation of pure H2 O2 solution with high productivity (up to 4.35 mmol cm-2  h-1 @300 mA cm-2 ; over 300 h). The CNTs with functionalized tips hold great promise for practical applications, even beyond H2 O2 generation.

Solvent Engineering of Oxygen-Enriched Carbon Dots for Efficient Electrochemical Hydrogen Peroxide Production

The development of cost-effective and reliable metal-free carbon-based electrocatalysts has gained significant attention for electrochemical hydrogen peroxide (H2 O2 ) generation through a two-electron oxygen reduction reaction. In this study, a scalable solvent engineering strategy is employed to fabricate oxygen-doped carbon dots (O-CDs) that exhibit excellent performance as electrocatalysts. By adjusting the ratio of ethanol and acetone solvents during the synthesis, the surface electronic structure of the resulting O-CDs can be systematically tuned. The amount of edge active CO group was strongly correlated with the selectivity and activity of the O-CDs. The optimum O-CDs-3 exhibited extraordinary H2 O2 selectivity of up to 96.55% (n = 2.06) at 0.65 V (vs RHE) and achieved a remarkably low Tafel plot of 64.8 mV dec-1 . Furthermore, the realistic H2 O2 productivity yield of flow cell is measured to be as high as 111.18 mg h-1  cm-2 for a duration of 10 h. The findings highlight the potential of universal solvent engineering approach for enabling the development of carbon-based electrocatalytic materials with improved performance. Further studies will be undertaken to explore the practical implications of the findings for advancing the field of carbon-based electrocatalysis.

Electrosynthesis of Hydrogen Peroxide through Selective Oxygen Reduction: A Carbon Innovation from Active Site Engineering to Device Design

Electrochemical synthesis of hydrogen peroxide (H2 O2 ) through the selective oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone method, while its success relies largely on the development of efficient electrocatalyst. Currently, carbon-based materials (CMs) are the most widely studied electrocatalysts for electrosynthesis of H2 O2 via ORR due to their low cost, earth abundance, and tunable catalytic properties. To achieve a high 2e- ORR selectivity, great progress is made in promoting the performance of carbon-based electrocatalysts and unveiling their underlying catalytic mechanisms. Here, a comprehensive review in the field is presented by summarizing the recent advances in CMs for H2 O2 production, focusing on the design, fabrication, and mechanism investigations over the catalytic active moieties, where an enhancement effect of defect engineering or heteroatom doping on H2 O2 selectivity is discussed thoroughly. Particularly, the influence of functional groups on CMs for a 2e- -pathway is highlighted. Further, for commercial perspectives, the significance of reactor design for decentralized H2 O2 production is emphasized, bridging the gap between intrinsic catalytic properties and apparent productivity in electrochemical devices. Finally, major challenges and opportunities for the practical electrosynthesis of H2 O2 and future research directions are proposed.

Platinum and palladium nanoparticles on boron-doped diamond for the electrochemical detection of hydrogen peroxide: a comparison study

Hydrogen peroxide (H2O2) plays a role in many facets - a household item, an important industrial chemical, a biomarker in vivo, and several others. For this reason, its measurement and quantification in a variety of media are important. While spectroscopic detection is primarily used for H2O2, electrochemical methods offer advantages in versatility, cost, and sensitivity. In this work, we investigate a 2-step surface metal nanoparticle (NP) modification for platinum (Pt) and palladium (Pd) on boron-doped diamond (BDD) electrodes for the detection of H2O2. Several parameters such as the metal salt concentration and electrodeposition charge in the 2-step modification were varied to find an optimum. Using cyclic voltammetry (CV), the BDD-PdNP electrode types were found to yield a sharper, more well-resolved H2O2 oxidation peak compared to the BDD-PtNP electrodes. Both metal NP electrode types significantly improved the response compared to the bare BDD electrode; a 150-200× improvement in sensitivity was observed across all modified electrode types. Calibration experiments were completed at both low and high concentration ranges in stagnant and flow-based solutions. The lowest limit of detection (LOD) obtained was 50 nM (5E-08 M) on a BDD-PdNP electrode modified with 1.0 mM PdCl2 to 5.0 mC in the wet chemical seeding and electrodeposition steps. 0.25 mM PdCl2 to 3.23 mC and 0.25 mM HPtCl6- to 3.23 mC also yielded a sufficient response for low-level H2O2, with LODs around 100 nM (1E-07 M). Overall, this work exemplifies the wide applicability of BDD and achieves sub-μM H2O2 LODs with a non-enzymatic electrode material.

Enhanced photoelectrocatalytic oxidation of hypophosphite and simultaneous recovery of metallic nickel via carbon aerogel cathode

Carbon aerogel (CA) cathode was adopted to an undivided-chamber photoelectrocatalytic system with TiO₂ nanotube arrays (TNA) photoanode to enhance the oxidation of hypophosphite (H₂PO₂^-) and simultaneous recovery of metallic nickel (Ni). Both the efficiencies of H₂PO₂^- oxidation and Ni recovery were significantly enhanced after replacing Ti or carbon fiber paper cathode with CA cathode. With 1.0 mM H₂PO₂^- and 1.0 mM Ni²⁺, the ratio of PO₄^3- production increased from ∼41% or ∼54% to ∼100%, and the ratio of Ni recovery increased from ∼20% or ∼ 37% to ∼93% within 180 min at 3.0 V. H₂PO₂^- was finally oxidized to PO₄^3- by •OH radicals, which was speculated to be generated from UV/H₂O₂ and bound on TNA photoanode. Meanwhile, Ni²⁺ was eventually electro-reduced to metallic Ni by a two-electron reduction reaction. The efficiencies of H₂PO₂^- oxidation and Ni recovery were favored at higher cell voltage, faintly acid conditions and larger H₂PO₂^- concentration. The stability of this system exhibited that the ratio of PO₄^3- production increased significantly in each cycle, which was attributed to the increase of H₂O₂ in-situ-generation via CA cathode caused by deposition of metallic Ni. Finally, the treatment of actual electroless nickel plating effluents was demonstrated.

Promotion of the Efficient Electrocatalytic Production of H2O2 by N,O- Co-Doped Porous Carbon

H₂O₂ generation via an electrochemical two-electron oxygen reduction (2e^- ORR) is a potential candidate to replace the industrial anthraquinone process. In this study, porous carbon catalysts co-doped by nitrogen and oxygen are successfully synthesized by the pyrolysis and oxidation of a ZIF-67 precursor. The catalyst exhibits a selectivity of ~83.1% for 2e^- ORR, with the electron-transferring number approaching 2.33, and generation rate of 2909.79 mmol g^-1 h^-1 at 0.36 V (vs. RHE) in KOH solution (0.1 M). The results prove that graphitic N and -COOH functional groups act as the catalytic centers for this reaction, and the two functional groups work together to greatly enhance the performance of 2e^- ORR. In addition, the introduction of the -COOH functional group increases the hydrophilicity and the zeta potential of the carbon materials, which also promotes the 2e^- ORR. The study provides a new understanding of the production of H₂O₂ by electrocatalytic oxygen reduction with MOF-derived carbon catalysts.

Highly selective electrosynthesis of H2O2 by N, O co-doped graphite nanosheets for efficient electro-Fenton degradation of p-nitrophenol

The activity and selectivity of the cathode towards electrosynthesis of H₂O₂ are critical for electro-Fenton process. Herein, nickel-foam modified with N, O co-doped graphite nanosheets (NO-GNSs/Ni-F) was developed as a cathode for highly efficient and selective electrosynthesis of H₂O₂. Expectedly, the accumulation of H₂O₂ at pH= 3 reached 494.2 mg L^-1 h^-1, with the selectivity toward H₂O₂ generation reaching 93.0%. The synergistic effect of different oxygen-containing functional groups and N species on the performance and selectivity of H₂O₂ electrosynthesis was investigated by density functional theory calculations, and the combination of epoxy and graphitic N (EP + N) was identified as the most favorable configuration with the lowest theoretical overpotential for H₂O₂ generation. Moreover, NO-GNSs/Ni-F was applied in the electro-Fenton process for p-nitrophenol degradation, resulting in 100% removal within 15 min with the kinetic rate constant of 0.446 min^-1 and 97.6% mineralization within 6 h. The efficient removal was mainly attributed to the generation of bulk ·OH. Furthermore, NO-GNSs/Ni-F exhibited excellent stability. This work provides a workable option for the enhancement of H₂O₂ accumulation and the efficient degradation of pollutants in electro-Fenton system.

Revealing the atomic-scale configuration modulation effect of boron dopant on carbon layers for H2O2 production

This work reports an atomic-scale carbon layer configuration tuning strategy induced by a boron dopant. Through regulating the doping level of boron, it was found that the boron dopant not only favors carbon layer growth by strengthening the metallic state of the Ni core, but also enhances the abundance of pyrrolic N species and graphitization degree of carbon by tailoring the carbon/nitrogen atom configuration, thereby contributing to more active pyrrolic N/carbon sites and accelerated interface reaction dynamics. Consequently, the developed Ni@B,N-C catalyst achieves remarkable electrochemical H₂O₂ production performances with a high selectivity of 95.5% and a yield of 795 mmol g^-1 h^-1. In comparison with previous reports in which the boron dopant mainly acts as an electronic structure regulator, this study reveals the tuning effect of boron dopants on the atomic-scale carbon layer configuration, opening up a new avenue for the development of advanced catalysts.

Edge-hosted Atomic Co-N4 Sites on Hierarchical Porous Carbon for Highly Selective Two-electron Oxygen Reduction Reaction

Not only high efficiency but also high selectivity of the electrocatalysts is crucial for high-performance, low-cost, and sustainable energy storage applications. Herein, we systematically investigate the edge effect of carbon-supported single-atom catalysts (SACs) on oxygen reduction reaction (ORR) pathways (two-electron (2 e^- ) or four-electron (4 e^- )) and conclude that the 2 e^- -ORR proceeding over the edge-hosted atomic Co-N₄ sites is more favorable than the basal-plane-hosted ones. As such, we have successfully synthesized and tuned Co-SACs with different edge-to-bulk ratios. The as-prepared edge-rich Co-N/HPC catalyst exhibits excellent 2 e^- -ORR performance with a remarkable selectivity of ≈95 % in a wide potential range. Furthermore, we also find that oxygen functional groups could saturate the graphitic carbon edges under the ORR operation and further promote electrocatalytic performance. These findings on the structure-property relationship in SACs offer a promising direction for large-scale and low-cost electrochemical H₂ O₂ production via the 2 e^- -ORR.

Composition Engineering of Amorphous Nickel Boride Nanoarchitectures Enabling Highly Efficient Electrosynthesis of Hydrogen Peroxide

Developing advanced electrocatalysts with exceptional two electron (2e^- ) selectivity, activity, and stability is crucial for driving the oxygen reduction reaction (ORR) to produce hydrogen peroxide (H₂ O₂ ). Herein, a composition engineering strategy is proposed to flexibly regulate the intrinsic activity of amorphous nickel boride nanoarchitectures for efficient 2e^- ORR by oriented reduction of Ni²⁺ with different amounts of BH₄ ^- . Among borides, the amorphous NiB₂ delivers the 2e^- selectivity close to 99% at 0.4 V and over 93% in a wide potential range, together with a negligible activity decay under prolonged time. Notably, an ultrahigh H₂ O₂ production rate of 4.753 mol g_cat ^-1 h^-1 is achieved upon assembling NiB₂ in the practical gas diffusion electrode. The combination of X-ray absorption and in situ Raman spectroscopy, as well as transient photovoltage measurements with density functional theory, unequivocally reveal that the atomic ratio between Ni and B induces the local electronic structure diversity, allowing optimization of the adsorption energy of Ni toward *OOH and reducing of the interfacial charge-transfer kinetics to preserve the OO bond.

Coupling electrochemical H2O2 production and the in situ selective oxidation of organics over a bifunctional TS-1@Co-N-C catalyst

A core-shell TS-1@Co-N-C was prepared by thermally pyrolyzing polydopamine and cobalt acetate outside TS-1 crystals. The Co-N-C shell catalyzes the electrochemical oxygen reduction to hydrogen peroxide (H₂O₂), while the TS-1 core catalyzes the oxidation of organic reagents. It achieved a H₂O₂ selectivity higher than 95% without organics, and accomplished an excellent bisphenol selectivity of 99.45% when coupled with phenol oxidation. Moreover, paired oxidation of furfural at both cathodic and anodic sides further led to an overall Faradaic efficiency of 141.09%. This bifunctional catalyst helps to integrate the in situ generation and usage of H₂O₂ into a single electrode, thus reduces the equipment and operating costs.

Carbon-Based Electrocatalysts for Efficient Hydrogen Peroxide Production

Hydrogen peroxide (H₂ O₂ ) is an environment-friendly and efficient oxidant with a wide range of applications in different industries. Recently, the production of hydrogen peroxide through direct electrosynthesis has attracted widespread research attention, and has emerged as the most promising method to replace the traditional energy-intensive multi-step anthraquinone process. In ongoing efforts to achieve highly efficient large-scale electrosynthesis of H₂ O₂ , carbon-based materials have been developed as 2e^- oxygen reduction reaction catalysts, with the benefits of low cost, abundant availability, and optimal performance. This review comprehensively introduces the strategies for optimizing carbon-based materials toward H₂ O₂ production, and the latest advances in carbon-based hybrid catalysts. The active sites of the carbon-based materials and the influence of coordination heteroatom doping on the selectivity of H₂ O₂ are extensively analyzed. In particular, the appropriate design of functional groups and understanding the effect of the electrolyte pH are expected to further improve the selective efficiency of producing H₂ O₂ via the oxygen reduction reaction. Methods for improving catalytic activity by interface engineering and reaction kinetics are summarized. Finally, the challenges carbon-based catalysts face before they can be employed for commercial-scale H₂ O₂ production are identified, and prospects for designing novel electrochemical reactors are proposed.

Understanding the activity origin of oxygen-doped carbon materials in catalyzing the two-electron oxygen reduction reaction towards hydrogen peroxide generation

Oxygen-doped carbon materials (OCM) have received a lot of attention for catalyzing the two-electron oxygen reduction reaction (2eORR) towards hydrogen peroxide generation, but the origin of their activity is not well understood. Based on density functional theory calculations, we introduce the Fukui function (f⁰), a more comprehensive and accurate method for identifying active sites and systematically investigating the activity of carbon materials doped with typical oxygen functional groups (OGs). According to the results, only ether or carbonyl has the potential to become the activity origin. The 2eORR activities of carbon materials co-doped by different OGs were then investigated, and a significant synergistic effect was discovered between different OGs (particularly between epoxy and other OGs), which might be the real active centers in OCM. To further understand the cause of the activity, the Fundamental Gap (E_g) was introduced to investigate the ability of various OCM to gain and lose electrons. The results show that the decrease in overpotential after oxygen co-doping can be attributed to the decrease in E_g. This work introduces descriptors (f⁰ and E_g) that can aid in the efficient design of catalysts and adds to our understanding of the 2eORR activity origin of OCM.

Identifying active sites of boron, nitrogen co-doped carbon materials for the oxygen reduction reaction to hydrogen peroxide

The electrochemical synthesis of hydrogen peroxide (H₂O₂) from two-electron oxygen reduction reaction (2e^- ORR) is a promising alternative for producing chemicals on demand, but its widespread application is still hampered by the low efficiency. Here, we successfully prepared a boron and nitrogen co-doped porous carbon (B/NC) aerogel with a tunable B, N co-doped configuration by the gelation of PVA-graphene, borax and PANI, followed by pyrolysis. Due to a hierarchical porous structure and optimized B, N co-doping, B/NC aerogel showed an excellent electrocatalytic performance for H₂O₂ production in alkaline solution with a high H₂O₂ selectivity (94.16%) at positive applied potential (0.6 V vs. RHE), superior than most of the other reported electrocatalysts. Density functional theory (DFT) calculations reveal that the hexagonal boron nitride (hBN) coupled with neighboring pyridinic-N species act as the active sites to lower free energy barrier for formation of HOO* intermediate, thus facilitating H₂O₂ production. Practically, B 2p electron plays an important role for the adsorption of HOO* intermediates. B and Nco-doping into carbon materials provides an effective and facile method to reasonably construct carbon-based catalysts for electroreduction of O₂ to H₂O₂.

Recent Progress of Electrochemical Production of Hydrogen Peroxide by Two-Electron Oxygen Reduction Reaction

Shifting electrochemical oxygen reduction reaction (ORR) via two-electron pathway becomes increasingly crucial as an alternative/green method for hydrogen peroxide (H2 O2 ) generation. Here, the development of 2e- ORR catalysts in recent years is reviewed, in aspects of reaction mechanism exploration, types of high-performance catalysts, factors to influence catalytic performance, and potential applications of 2e- ORR. Based on the previous theoretical and experimental studies, the underlying 2e- ORR catalytic mechanism is firstly unveiled, in aspect of reaction pathway, thermodynamic free energy diagram, limiting potential, and volcano plots. Then, various types of efficient catalysts for producing H2 O2 via 2e- ORR pathway are summarized. Additionally, the catalytic active sites and factors to influence catalysts' performance, such as electronic structure, carbon defect, functional groups (O, N, B, S, F etc.), synergistic effect, and others (pH, pore structure, steric hindrance effect, etc.) are discussed. The H2 O2 electrogeneration via 2e- ORR also has various potential applications in wastewater treatment, disinfection, organics degradation, and energy storage. Finally, potential future directions and prospects in 2e- ORR catalysts for electrochemically producing H2 O2 are examined. These insights may help develop highly active/selective 2e- ORR catalysts and shape the potential application of this electrochemical H2 O2 producing method.

Accelerated Fe2+ Regeneration in an Effective Electro-Fenton Process by Boosting Internal Electron Transfer to a Nitrogen-Conjugated Fe(III) Complex

The regeneration rate of Fe²⁺ from Fe³⁺ dictates the performance of the electro-Fenton (EF) process, represented by the amount of produced hydroxyl radicals (·OH). Current strategies for the acceleration of Fe²⁺ regeneration normally require additional chemical reagents, to vary the redox potential of Fe²⁺/Fe³⁺. Here, we report an attempt at using the intrinsic property of the electrode to our advantage, i.e., nitrogen-doped carbon aerogel (NDCA), as a reducing agent for the regeneration of Fe²⁺ without using foreign reagents. Moreover, the pyrrolic N in NDCA provides unpaired electrons through the carbon framework to reduce Fe³⁺, while the graphitic and pyridinic N coordinate with Fe³⁺ to form a C-O-Fe-N₂ bond, facilitating electron transfer from both the external circuit and pyrrolic N to Fe³⁺. Our Fe²⁺/NDCA-EF system exhibits a 5.8 ± 0.3 times higher performance, in terms of the amount of generated ·OH, than a traditional Fenton system using the same Fe²⁺ concentration. In the subsequent reaction, the Fe²⁺/NDCA-EF system demonstrates 100.0% removal of dimethyl phthalate, 3-chlorophenol, bisphenol A, and sulfamethoxazole with a low specific energy consumption of 0.17-0.36 kW·h·g^-1. Furthermore, 90.1 ± 0.6% removal of dissolved organic carbon and 83.3 ± 0.9% removal of NH₃-N are achieved in the treatment of domestic sewage. The purpose of this work is to present a novel strategy for the regeneration of Fe²⁺ in the EF process and also to elucidate the role of different N species of the carbonaceous electrode in contributing to the redox cycle of Fe²⁺/Fe³⁺.

Nitrogen, sulfur co-doped carbon coated zinc sulfide for efficient hydrogen peroxide electrosynthesis

Oxygen electroreduction (ORR) via a two-electron pathway is a promising alternative for hydrogen peroxide (H2O2) synthesis in small-scale applications. In this work, nitrogen and sulfur co-doped carbon coated zinc sulfide nanoparticles (ZnS@C) are synthesized using facile high-temperature annealing. In an alkaline electrolyte, the presence of ZnS suppresses the reduction of H2O2 during the ORR and contributes to high H2O2 selectivity (∼90%) over a wide potential range (0.40-0.80 V). Continuous generation of H2O2 is in turn achieved at an outstanding rate of 1.485 mol gcat.-1 h-1 with a faradaic efficiency of 93.7%.

Thermally treated candle soot as a novel catalyst for hydrogen peroxide in-situ production enhancement in the bio-electro-Fenton system

Thermally treated candle soot (TCS) was used as a two-electron (2e¯) oxygen reduction reaction (ORR) catalyst to in situ produce H₂O₂ in a bio-electro-Fenton (BEF) system. Compared with the pristine candle soot (CS), TCS showed larger Brunauer-Emmett-Teller (BET) surface area (102.54 m² g^-1 vs. 61.79 m² g^-1), higher mesoporous ratio (50.39% vs. 34.98%), and improved hydrophilicity. X-ray photoelectron spectra (XPS) results revealed that the C-O-C was the dominant oxygen-containing group of the CS, and its percentage reached at 80.55%. However, the C-O-C ratio of the TCS decreased to 48.93%, whilst it's CO and OC-O ratios significantly increased to 27.92% and 23.15%. The TCS showed a high H₂O₂ selectivity (87.5%∼97.0%) at the neutral pH condition, which was much higher than that of the commonly used carbon black (CB) catalyst. Finally, the H₂O₂ concentration maxima (C_max-_H2O2) of the bio-electro-Fenton system running with the TCS air-cathode (BEF-TCS) achieved at 32.02 mg/L, which was 6.29 times higher than that of the BEF-CB (5.09 mg/L). The removal and mineralization ratios of the SMX in the BEF-TCS reached at 83.0% and 79.0%, respectively. This paper reported a novel 2e¯ ORR electro-catalyst which was low-cost, easily available and highly efficiency.

Construction and Transition Metal Oxide Loading of Hierarchically Porous Carbon Aerogels

Hierarchically porous carbon aerogels (CAs) were prepared by organic condensation gelation method combined with atmospheric drying and pore-formation technology, followed by a carbonization process. With as-prepared CAs as substrate, the transition metal oxide nanoparticles loaded CAs composites (MnO2/Mn2O3@CA and Ni/NiO@CA) were achieved by means of liquid etching method combined with heat treatment, respectively. The catalyst, pore-forming agent and etching have important roles on the apparent density and pore structure of CAs. The hydrochloric acid (catalyst) significantly accelerates the gelation process and influences the size and distribution of macropores, whereas the addition of PEG2000 (pore-forming agent) and the etching of liquid solution leads to the formation of mesopore structure in CAs. Appropriate amounts of hydrochloric acid and PEG2000 allow the formation of hierarchically porous CAs with a BET surface area of 482.9 m2·g-1 and a macropore size of 11.3 μm. After etching and loading, the framework of CAs is etched to become a mesoporous structure, and the transition metal oxide nanoparticles can be uniformly loaded in CAs. These resultant composites have promising application in super capacitor, electrocatalysis, batteries and other fields.

In Situ-Formed PdFe Nanoalloy and Carbon Defects in Cathode for Synergic Reduction-Oxidation of Chlorinated Pollutants in Electro-Fenton Process

Complete dechlorination and mineralization of chlorophenols via the reduction-oxidation-mediated electro-Fenton process with a composite bulk cathode is first proposed. The in situ formation of a PdFe nanoalloy and carbon defects as key active sites is mutually induced during the formation of a carbon aerogel-based electrode. Specifically, the PdFe nanoalloy promotes the generation of [H]_ads as reduction sites and improves the electron transfer via an electrical circuit, while the carbon defects selectively favor the 2e^- oxygen reduction pathway. Notably, this work implies a novel electrocatalytic model for the formation of ·OH via (2 + 1)e^- oxygen reduction by a consecutive reaction with carbon defects and a PdFe nanoalloy. Complete total organic carbon removal and dechlorination of 3-chlorophenol were performed after 6 h. The kinetic rate constant for removing haloacetamides (HAMs) in drinking water was 0.21-0.41 h^-1, and the degradation efficiency was self-enhanced after electrolysis for 2 h because of the increased concentration of [H⁺]. The specific energy consumption was ∼0.55 W·h·g^-1 at 100% removal of some HAMs, corresponding to a power consumption of 0.6-1.1 kW·h for complete dehalogenation per ton of drinking water in waterworks. Moreover, the PdFe alloy/CA exhibited extreme mechanical and electrochemical stability with limited iron (∼0.07 ppm) and palladium (0.02 ppm) leaching during the actual application.

Recent Progress on Carbonaceous Material Engineering for Electrochemical Hydrogen Peroxide Generation

Electrochemical synthesis of hydrogen peroxide (H2O2) provides a clean and safe technology for large-scale H2O2 production. The core of this project is the development of highly active and highly selective catalysts. Recent studies demonstrate that carbonaceous materials are favorable catalysts because of their low-cost and tunable surface structures. This brief review first summarizes the strategies of carbonaceous material engineering for selective two-electron O2 reduction reaction and discusses potential mechanisms. In addition, several device designs using carbonaceous materials as catalysts for H2O2 production are introduced. Finally, research directions are proposed for practical application and performance improvement.

Selective Electrocatalytic Water Oxidation to Produce H2O2 Using a C,N Codoped TiO2 Electrode in an Acidic Electrolyte

Production of hydrogen peroxide (H₂O₂) via in situ electrochemical water oxidation possesses great potential applications in the energy and environment fields. In this work, for the first time, we reported a C,N codoped TiO₂ electrode for selective electrocatalytic water oxidation to produce H₂O₂ in an acidic electrolyte. An electrochemical anodic oxidation method combined with postcalcination in the presence of urea was applied to fabricate such a C,N codoped TiO₂ electrode, which was evidenced by detail structural characterizations. The calcination temperature and urea atmosphere were found to play key roles in its catalytic performances; the optimized 600N sample exhibited an onset potential of 2.66 V (vs Ag/AgCl) and a Tafel slope of 51 mV dec^-1 at pH 3. Under the optimal applied potential, the cumulative H₂O₂ concentration for this sample reached 0.29 μmol L^-1 cm^-2 h^-1. More importantly, a simple recalcination strategy was developed to recover the deactivation electrode. This study proposed an efficient C,N codoped TiO₂ electrode toward water oxidation to selectively produce H₂O₂ in the acidic electrolyte, which could be further used to in situ generate H₂O₂ for the energy- and environment-related fields with water as the precursor.

Deep-eutectic-solvent synthesis of N/O self-doped hollow carbon nanorods for efficient energy storage

N/O self-doped hollow carbon nanorods (HCNs) with micro/mesoporous walls are fabricated based on a new deep-eutectic-solvent that serves as an all-in-one precursor, self-template, and self-dopant agent. The carbon-based supercapacitor using an ionic liquid electrolyte exhibits a high energy density of 116.5 W h kg-1 with excellent long-term cycling performance.