Improving the quantum yields of fluorophores by inhibiting twisted intramolecular charge transfer using electron-withdrawing group-functionalized piperidine auxochromes

Synthesis and Photophysical Properties of 4'-5' Disubstituted CinNapht Dyes Accessible through Double SNAr Late-Stage Functionalization

This article describes the synthesis of a difluorinated CinNapht derivative in the 4' and 5' positions allowing the easy access to two new families of fluorophores by late-stage functionalization using SNAr. The first one comprises derivatives incorporating hindered aromatic amines in the 4' and 5' positions, which show red-emission in apolar solvents. The second one is obtained through the use of dinucleophiles. Among them, Tetrahydroquinoxaline (THQ) and tetrahydrobenzodiazepine (THB) compounds show strongly redshifted emission. The photophysical properties of all the fluorophores in these two families are studied and rationalized by DFT and TDDFT calculations. The most promising compounds have been used to image living cells by confocal microscopy.

Dihydropyridopyrazine Functionalized Xanthene: Generating Stable NIR Dyes with Small-Molecular Weight by Enhanced Charge Separation

Near-infrared region (NIR; 650-1700 nm) dyes offer many advantages over traditional dyes with absorption and emission in the visible region. However, developing new NIR dyes, especially organic dyes with long wavelengths, small molecular weight, and excellent stability and biocompatibility, is still quite challenging. Herein, we present a general method to enhance the absorption and emission wavelengths of traditional fluorophores by simply appending a charge separation structure, dihydropyridopyrazine. These novel NIR dyes not only exhibited greatly redshifted wavelengths compared to their parent dyes, but also displayed a small molecular weight increase together with retained stability and biocompatibility. Specifically, dye NIR-OX, a dihydropyridopyra-zine derivative of oxazine with a molecular mass of 386.2 Da, exhibited an absorption at 822 nm and an emission extending to 1200 nm, making it one of the smallest molecular-weight NIR-II emitting dyes. Thanks to its rapid metabolism and long wave-length, NIR-OX enabled high-contrast bioimaging and assessment of cholestatic liver injury in vivo and also facilitated the evalua-tion of the efficacy of liver protection medicines against cholestatic liver injury.

Engineering a far-red fluorescent probe for rapid detection of Hg(II) ions in both cells and zebrafish

Abnormal accumulation of mercury ions (Hg2+) in organisms can lead to severe central nervous system and other diseases. Therefore, the monitoring and detection of Hg2+ are of great significance for human health and environmental safety. Herein, we designed and synthesized a novel far-red to NIR emission fluorescent probe (Rho-Hg) based on rhodamine derivative as the fluorophore and thiospirolactone as the recognition site for turn-on detecting of Hg2+ in living cells and zebrafish. The probe Rho-Hg displayed superior sensitivity (detection limit = 17.5 nM), rapid response (<1 min), colorimetric change, high selectivity, and moderate pH stability. Leveraging this probe, we realized the real-time monitoring of Hg2+ in real samples, living cells and zebrafish. By fostering zebrafish embryos and larvae in Hg2+-containing nutrient solution, we noticed that Hg2+ was ingested into the zebrafish liver when zebrafish were grown up to 3 days old, and thus we successfully monitored the accumulation and changes of Hg2+ during zebrafish growth and development. Thus, the probe Rho-Hg could be a powerful tool for sensitive and real-time monitoring of Hg2+ in living systems.

Cucurbit[7]uril as the host of adamantane-modified dyes for fluorescence enhancement in aqueous environments

Taking advantage of the excellent host-guest complexation ability between an auxochrome (adamantane group) and CB[7], the fluorescence emission performance of dyes in water was effectively improved with the addition of two equivalents of CB[7], which provided an efficient method for increasing fluorescence intensity in aqueous environments. Furthermore, these dyes with the host were successfully used in cell imaging.

Phospha-RosIndolizine Dye with Shortwave Infrared (SWIR) Absorption and Emission

Shortwave infrared (SWIR, 1000-1700 nm) absorbing and emitting dyes are needed for infrared diodes and sensors used in a wide variety of industrial and medical applications. Herein, an electron-withdrawing phosphine oxide (P═O) substituted xanthene is coupled with strong indolizine donors to produce a SWIR absorbing (λabs = 1294 nm in DCM) and emitting (λemis = 1450 nm in DCM) dye called PRos1450. The unique properties of this dye are characterized via photophysical, electrochemical, and computational analyses.

Chemical Control of Fluorescence Lifetime towards Multiplexing Imaging

Fluorescence lifetime imaging has been a powerful tool for biomedical research. Recently, fluorescence lifetime-based multiplexing imaging has expanded imaging channels by using probes that harbor the same spectral channels and distinct excited state lifetime. While it is desirable to control the excited state lifetime of any given fluorescent probes, the rational control of fluorescence lifetimes remains a challenge. Herein, we chose boron dipyrromethene (BODIPY) as a model system and provided chemical strategies to regulate the fluorescence lifetime of its derivatives with varying spectral features. We find electronegativity of structural substituents at the 8' and 5' positions is important to control the lifetime for the green-emitting and red-emitting BODIPY scaffolds. Mechanistically, such influences are exerted via the photo-induced electron transfer and the intramolecular charge transfer processes for the 8' and 5' positions of BODIPY, respectively. Based on these principles, we have generated a group of BODIPY probes that enable imaging experiments to separate multiple targets using fluorescence lifetime as a signal. In addition to BODIPY, we envision modulation of electronegativity of chemical substituents could serve as a feasible strategy to achieve rational control of fluorescence lifetime for a variety of small molecule fluorophores.

Nitrile Vibrational Lifetimes as Probes of Local Electric Fields

Optical measurements of electric fields have wide-ranging applications in the fields of chemistry and biology. Previously, such measurements focused on shifts in intensity or frequency. Here, we show that nitrile vibrational lifetimes can report local electric fields through ultrasensitive picosecond mid-infrared-near-infrared double-resonance fluorescence spectro-microscopy on Rhodamine 800. Using a robust convolution fitting approach, we observe that the nitrile vibrational lifetimes are strongly linearly correlated (R2 = 0.841) with solvent reaction fields. Supported by density functional theory, we rationalize this trend through a doorway model of intramolecular vibrational energy redistribution. This work provides new fundamental insights into the nature of vibrational energy flow in large polyatomic molecular systems and establishes a theoretical basis for electric field sensing with vibrational lifetimes, offering a new experimental dimension for probing intracellular electrostatics.

H-bond engineering as a general strategy for inhibiting twisted intramolecular charge transfer in donor-acceptor fluorescent probes: Reshaping the pre-twisting method

Twisted intramolecular charge transfer (TICT) is a fluorescence quenching mechanism that occurs in donor-acceptor (D‒A) molecules. Chemical engineering research into TICT regulation over the past 50 years has primarily focused on manipulating steric factors by introducing alkyl groups at the D-A junction (pre-twisting). Herein, we report a significant advance in TICT-based probes through the introducing of H-bond as an efficient strategy for suppressing TICT. Accordingly, ortho-Cl installation in the N-phenylpyrazine-2-carboxamide (PPC) platform can achieve complete reversal from the quenching mode to the light-up mode. This specific H-bonding (N-H⋯Cl) effectively blocks N-C(Ar) bond rotation, leading to fluorescence-ON. This suggested that TICT inhibition may be involved. Therefore, in a sharp contrast to the general nature of the pre-twisting method in rotor molecules, which involves incorporating steric hindrance at either the donor or acceptor moiety to enhance intramolecular rotation (promotion TICT), the ortho-H bonding strategy completely freezes D‒A bond twisting (suppression TICT), resulting in improved fluorescent intensity. Furthermore, the fluorophores were evaluated for Hg2+ detection and in vivo bio-imaging. Notably, Hg-complexation induced another fluorescence inversion (OFF-ON) by imposing spatial constraints on twisting freedom in 3,4-Cl-PPC. Taken together, this work provides a valid and generalizable tactic for the development of high-performance sensing fluorophores through inhibition of TICT.

Unveiling the Influence of Glutathione in Suppressing the Conversion of Aspirin to Salicylic Acid: A Fluorescence and DFT Study

Aspirin is a commonly used nonsteroidal anti-inflammatory drug, associated with many adverse effects. The adverse effects of aspirin such as tinnitus, Reye's syndrome and gastrointestinal bleeding are caused due to conversion of aspirin into its active metabolite salicylic acid after oral intake. Glutathione is a naturally occurring antioxidant produced by the liver and nerve cells in the central nervous system. It helps to metabolize toxins, break down free radicles, and support immune function. This study aims to investigate and explore the possibility of inhibiting aspirin to salicylic acid conversion in presence of glutathione at a molecular level using spectroscopic techniques such as UV-Visible absorption, time-Resolved and time-dependent fluorescence and theoretical DFT/ TD-DFT calculations. The results of steady state fluorescence spectroscopy and time-dependent fluorescence indicated that the aspirin to salicylic acid conversion is considerably inhibited in presence of glutathione. Further, the results presented here might have significant clinical implications for individuals with variations in glutathione level.

Tackling the water solubility dilemma of spiroring-closing rhodamine: Sulfone-functionalization enabling rational designing water-soluble probe for rapid visualizing mercury ions in cosmetics

Rhodamine derivatives possessing spiroring-closing structures exhibit colorlessness, while the induction of spiroring-opening by metal ions results in notable color changes, rendering them as ideal platform for the development of functional probes with broad applications. However, the spiroring-closing form of rhodamine-based probes exhibits limited water solubility due to its neutral character, necessitating the incorporation of organic solvents to enhance solubility, which may adversely affect the natural system. Designing rhodamine probes with high solubility in both the zwitterionic and neutral form is of utmost importance and presents a significant challenge. This study presents a sulfone-rhodamine-based probe that exhibits good water solubility both in the spiroring opening and closing for detecting Hg2+. Upon the presence of Hg2+, the color undergoes a noticeable change from colorless to pink, with a response time of less than 1 min. probe 1 demonstrates an excellent linear relationship with Hg2+ concentrations within the range of 0-8 μM, and achieves a detection limit is 17.26 nM. The effectiveness of probe 1 was confirmed through the analysis of mercury ions in cosmetic products. Utilizing this probe, test paper strips have been developed to enhance the portability of Hg2+ detection naked eyes.

Lumos maxima - How robust fluorophores resist photobleaching?

Fluorescent dyes synergize with advanced microscopy for researchers to investigate the location and dynamic processes of biomacromolecules with high spatial and temporal resolution. However, the instability of fluorescent dyes, including photobleaching and photoconversion, represent fundamental limits for super-resolution and time-lapse imaging. In this review, we discuss the latest advances in improving the photostability of fluorescent dyes. We summarize the primary photobleaching processes of cyanine and rhodamine dyes and highlight a range of strategies developed in recent years to strengthen these fluorophores. Additionally, we discuss the influence of protein microenvironments and labeling methods on the photostability of fluorophores. We aim to inspire next-generation robust and bright fluorophores that ultimately enable the routine practice of time-lapse super-resolution imaging of live cells.

A highly water-soluble hydrogen-bond-induced emission carbon dots for ratiometric fluorescent detection of water content in organic solvents

Water in organic solvents is a prevalent impurity that significantly influences chemical reactions and industrial processes. Carbon dots (CDs) gained attention as promising tools for chemosensing due to their advantageous characteristics, including easy synthesis, cost-effectiveness, and excellent adjustability and stability. However, limited solubility in water and turn off fluorescence response mode hinder the practical utilization of CDs for water sensing. To tackle such dilemma, a highly water-soluble CDs with distinctive hydrogen-bond-induced emission (HBIE) was rationally designed through introducing sulfone group into the widely employed p-phenylenediamine precursor. The inclusion of sulfone group imparts the CDs with notable water solubility, as well as distinctive ratiometric fluorescent response towards water content, exhibiting high sensitivity and selectivity. Upon exposure to water, the emission color of CDs undergoes a real-time transition from blue to yellow-green, which can be readily discerned by naked eyes. The CDs have been successfully applied in detecting water in commercially available alcohol. This study presents a straightforward yet efficacious approach for rationally design of CDs with unique HBIE characteristics and ratiometric fluorescent response, offering great potential for practical chemosensing applications.

An open and shut case? Chemistry to control xanthene dyes

Fluorescent dyes are an indispensable part of the scientific enterprise. Xanthene-based fluorophores, like fluorescein and rhodamine, have been in continual use across numerous fields since their invention in the late 19th century. Modern methods to synthesize and expand the scope of xanthene dye chemistry have enabled new colors, enhanced stability, and improved brightness. Modifications to the 3-position of xanthene dyes have been, until recently, less well-explored. Here, we discuss how small changes to the identity of the substituent at the 3-position of fluoresceins and rhodamines can profoundly alter the properties of xanthene dyes, with the potential to unlock new applications at the interface of chemistry and biology.

Azaphosphinate Dyes: A Low Molecular Weight Near-Infrared Scaffold for Development of Photoacoustic or Fluorescence Imaging Probes

Near-infrared (NIR) dyes are desirable for biological imaging applications including photoacoustic (PA) and fluorescence imaging. Nonetheless, current NIR dyes are often plagued by relatively large molecular weights, poor water solubility, and limited photostability. Herein, we provide the first examples of azaphosphinate dyes which display desirable properties such as low molecular weight, absorption/emission above 750 nm, and remarkable water solubility. In PA imaging, an azaphosphinate dye exhibited a 4.1-fold enhancement in intensity compared to commonly used standards, the ability to multiplex with existing dyes in whole blood, imaging depths of 2.75 cm in a tissue model, and contrast in mice. An improved derivative for fluorescence imaging displayed a >10-fold reduction in photobleaching in water compared to the FDA-approved indocyanine green dye and could be visualized in mice. This new dye class provides a robust scaffold for the development of photoacoustic or NIR fluorescence imaging agents.

Chemical Approaches to Optimize the Properties of Organic Fluorophores for Imaging and Sensing

Organic fluorophores are indispensable tools in cells, tissue and in vivo imaging, and have enabled much progress in the wide range of biological and biomedical fields. However, many available dyes suffer from insufficient performances, such as short absorption and emission wavelength, low brightness, poor stability, small Stokes shift, and unsuitable permeability, restricting their application in advanced imaging technology and complex imaging. Over the past two decades, many efforts have been made to improve these performances of fluorophores. Starting with the luminescence principle of fluorophores, this review clarifies the mechanisms of the insufficient performance for traditional fluorophores to a certain extent, systematically summarizes the modified approaches of optimizing properties, highlights the typical applications of the improved fluorophores in imaging and sensing, and indicates existing problems and challenges in this area. This progress not only proves the significance of improving fluorophores properties, but also provide a theoretical guidance for the development of high-performance fluorophores.

Photophysical Analysis of Aggregation-Induced Emission (AIE) Luminogens Based on Triphenylamine and Thiophene: Insights into Emission Behavior in Solution and PMMA Films

Aggregation-Induced Emission (AIE) luminogens have garnered significant interest due to their distinctive applications in different applications. Among the diverse molecular architectures, those based on triphenylamine and thiophene hold prominence. However, a comprehensive understanding of the deactivation mechanism both in solution and films remains lacking. In this study, we synthesized and characterized spectroscopically two AIE luminogens: 5-(4-(bis(4-methoxyphenyl)amino)phenyl)thiophene-2-carbaldehyde (TTY) and 5'-(4-(bis(4-methoxyphenyl)amino)phenyl)-[2,2'-bithiophene]-5-carbaldehyde (TTO). Photophysical and theoretical analyses were conducted in both solution and PMMA films to understand the deactivation mechanism of TTY and TTO. In diluted solutions, the emission behavior of TTY and TTO is influenced by the solvent, and the deactivation of the excited state can occur via locally excited (LE) or twisted intramolecular charge transfer (TICT) state. In PMMA films, rotational and translational movements are constrained, necessitating emission solely from the LE state. Nevertheless, in the PMMA film, excimers-like structures form, resulting in the emergence of a longer wavelength band and a reduction in emission intensity. The zenith of emission intensity occurs when molecules are dispersed at higher concentrations within PMMA, effectively diminishing the likelihood of excimer-like formations. Luminescent Solar Concentrators (LSC) were fabricated to validate these findings, and the optical efficiency was studied at varying concentrations of luminogen and PMMA.

Engineered fluorogenic HaloTag ligands for turn-on labelling in live cells

Recent years have seen dramatic improvements in the design of organic fluorophores based on limiting non-radiative decay pathways. We sought to extend this understanding to benzothiadiazoles that have been used as turn-on fluorescent substrates for the self-labeling protein HaloTag. When conjugated to HaloTag, the benzothiadiazoles reside in a narrow tunnel that precludes twisted internal charge transfer, which allowed us to explore steric and electronic effects on other non-radiative decay pathways. By minimizing both non-radiative decay and nonspecific interactions with cellular components, we produced improved turn-on dyes with 136-fold increase in fluorescence over background in cells.

THQ-Xanthene: An Emerging Strategy to Create Next-Generation NIR-I/II Fluorophores

Near-infrared fluorescence imaging is vital for exploring the biological world. The short emissions (<650 nm) and small Stokes shifts (<30 nm) of current xanthene dyes obstruct their biological applications since a long time. Recently, a potent and universal THQ structural modification technique that shifts emission to the NIR-I/II range and enables a substantial Stokes shift (>100 nm) for THQ-modified xanthene dyes is established. Thus, a timely discussion of THQ-xanthene and its applications is extensive. Hence, the advent, working principles, development trajectory, and biological applications of THQ-xanthene dyes, especially in the fields of fluorescence probe-based sensing and imaging, cancer theranostics, and super-resolution imaging, are introduced. It is envisioned that the THQ modification tactic is a simple yet exceptional approach to upgrade the performance of conventional xanthene dyes. THQ-xanthene will advance the strides of xanthene-based potentials in early fluorescent diagnosis of diseases, cancer theranostics, and imaging-guided surgery.

ATP-triggered highly sensitive probes for super-resolution mitochondrial imaging and low-dose bioimaging

Adenosine triphosphate (ATP), mainly produced in mitochondria, plays an important role in various pathological processes such as inflammation and acute liver injury. Fluorescence imaging is a powerful tool for imaging tissue structure and function in vivo. To date, the lack of biocompatible ATP probes with bright fluorescence emission has hindered their application in basic research and clinical trials. Here, we report a method for preparing ATP probes using a ZIF-90 potting dye, which produces bright ATP probes by encapsulating a modified high fluorescence quantum yield dye into a ZIF-90 skeleton. The nanoprobe does not fluoresce due to the coating. ATP can cooperate with Zn²⁺ to decompose the nanoprobe structure, release the dye and restore the fluorescence. Both nanoprobes ORhBSO₂@ZIF-90 and SiRhBSO₂@ZIF-90 showed higher sensitivity than the reported ATP nanoprobes with detection limits of 7.56 μM and 6.6 μM, and with lower doses (10 μg mL^-1) of probes for cell imaging. In addition, SiRhBSO₂@ZIF-90 has also been successfully used in the liver injury model. The ZIF-90 encapsulation strategy can retain the high fluorescence quantum yield and improve the biocompatibility of the dye.

Monitoring amyloid aggregation via a twisted intramolecular charge transfer (TICT)-based fluorescent sensor array

Imaging amyloid-beta (Aβ) aggregation is critical for understanding the pathology and aiding the pre-symptomatic intervention of Alzheimer's disease (AD). Amyloid aggregation consists of multiple phases with increasing viscosities and demands probes with broad dynamic ranges and gradient sensitivities for continuous monitoring. Yet, existing probes designed based on the twisted intramolecular charge transfer (TICT) mechanism mainly focused on donor engineering, limiting the sensitivities and/or dynamic ranges of these fluorophores to a narrow window. Herein, using quantum chemical calculations, we investigated multiple factors affecting the TICT process of fluorophores. It includes the conjugation length, the net charge of the fluorophore scaffold, the donor strength, and the geometric pre-twisting. We have established an integrative framework for tuning TICT tendencies. Based on this framework, a platter of hemicyanines with varied sensitivities and dynamic ranges is synthesized, forming a sensor array and enabling the observation of various stages of Aβ aggregations. This approach will significantly facilitate the development of TICT-based fluorescent probes with tailored environmental sensitivities for numerous applications.

Experimentally Calibrated Computational Prediction Enables Accurate Fine-Tuning of Near-Infrared Rhodamines for Multiplexing

A significant barrier inhibiting multiplexed imaging in the near-infrared (NIR) is the extensive trial and error associated with fine-tuning NIR dyes. In particular, the need to synthesize and experimentally evaluate dye derivatives in order to empirically identify those that can be used in multiplexing applications, requires a large investment of time. While coarse-tuning efforts benefit from computational prediction that can be used to identify target dye structures for synthetic campaigns, errors in computational prediction remain too large to accurately parse modifications aimed at fine-tuning changes in dye absorbance and emission. To address this issue, we screened different levels of theory and identified a time-dependent density functional theory (TD-DFT) approach that can rapidly, as opposed to synthesis and experimental evaluation, estimate absorbance and emission. By calibrating these computational estimations of absorbance and emission to experimentally determined parameters for a panel of existing NIR dyes, we obtain calibration curves that can be used to accurately predict the effect of fine-tuning modifications in new dyes. We demonstrate the predictive power of this calibrated dataset using seven previously unreported dyes, obtaining mean percent errors in absorbance and emission of 2.2 and 2.8 %, respectively. This approach provides a significant timesavings, relative to synthesis and evaluation of dye derivatives, and can be used to focus synthetic campaigns on the most promising dye structures. The new dyes described herein can be utilized for multiplexed imaging, and the experimentally calibrated dataset will provide the dye chemistry community with a means to rapidly identify fine-tuned NIR dyes in silico to guide subsequent synthetic campaigns.

Xanthone-based solvatochromic fluorophores for quantifying micropolarity of protein aggregates

Proper three-dimensional structures are essential for maintaining the functionality of proteins and for avoiding pathological consequences of improper folding. Misfolding and aggregation of proteins have been both associated with neurodegenerative disease. Therefore, a variety of fluorogenic tools that respond to both polarity and viscosity have been developed to detect protein aggregation. However, the rational design of highly sensitive fluorophores that respond solely to polarity has remained elusive. In this work, we demonstrate that electron-withdrawing heteroatoms with (d-p)-π* conjugation can stabilize lowest unoccupied molecular orbital (LUMO) energy levels and promote bathochromic shifts. Guided by computational analyses, we have devised a novel series of xanthone-based solvatochromic fluorophores that have rarely been systematically studied. The resulting probes exhibit superior sensitivity to polarity but are insensitive to viscosity. As proof of concept, we have synthesized protein targeting probes for live-cell confocal imaging intended to quantify the polarity of misfolded and aggregated proteins. Interestingly, our results reveal several layers of protein aggregates in a way that we had not anticipated. First, microenvironments with reduced polarity were validated in the misfolding and aggregation of folded globular proteins. Second, granular aggregates of AgHalo displayed a less polar environment than aggregates formed by folded globular protein represented by Htt-polyQ. Third, our studies reveal that granular protein aggregates formed in response to different types of stressors exhibit significant polarity differences. These results show that the solvatochromic fluorophores solely responsive to polarity represent a new class of indicators that can be widely used for detecting protein aggregation in live cells, thus paving the way for elucidating cellular mechanisms of protein aggregation as well as therapeutic approaches to managing intracellular aggregates.

Silicon functionalization expands the repertoire of Si-rhodamine fluorescent probes

Fluorescent dyes such as rhodamines are widely used to assay the activity and image the location of otherwise invisible molecules. Si-rhodamines, in which the bridging oxygen of rhodamines is replaced with a dimethyl silyl group, are increasingly the dye scaffold of choice for biological applications, as fluorescence is shifted into the near-infrared while maintaining high brightness. Despite intense interest in Si-rhodamines, there has been no exploration of the scope of silicon functionalization in these dyes, a potential site of modification that does not exist in conventional rhodamines. Here we report a broad range of silyl modifications that enable brighter dyes, further red-shifting, new ways to modulate fluorescence, and the introduction of handles for dye attachment, including fluorogenic labeling agents for nuclear DNA, SNAP-tag and HaloTag labeling. Modifications to the bridging silicon are therefore of broad utility to improve and expand the applications of all Si-dyes.

Functionalization of the bridging silicon atom of Si-rhodamine dyes allows tuning of dye performance, the attachment of sensors, and the addition of biomolecular targeting ligands useful for the construction of live cell imaging probes.

A synergistic strategy to develop photostable and bright dyes with long Stokes shift for nanoscopy

The quality and application of super-resolution fluorescence imaging greatly lie in the dyes’ properties, including photostability, brightness, and Stokes shift. Here we report a synergistic strategy to simultaneously improve such properties of regular fluorophores. Introduction of quinoxaline motif with fine-tuned electron density to conventional rhodamines generates new dyes with vibration structure and inhibited twisted-intramolecular-charge-transfer (TICT) formation synchronously, thus increasing the brightness and photostability while enlarging Stokes shift. The new fluorophore YL578 exhibits around twofold greater brightness and Stokes shift than its parental fluorophore, Rhodamine B. Importantly, in Stimulated Emission Depletion (STED) microscopy, YL578 derived probe possesses a superior photostability and thus renders threefold more frames than carbopyronine based probes (CPY-Halo and 580CP-Halo), known as photostable fluorophores for STED imaging. Furthermore, the strategy is well generalized to offer a new class of bright and photostable fluorescent probes with long Stokes shift (up to 136 nm) for bioimaging and biosensing.

Super-resolution microscopy is a powerful tool for cellular studies but requires bright and stable fluorescent probes. Here, the authors report on a strategy to introduce quinoxaline motifs to conventional probes to make them brighter, more photostable, larger Stokes shift, and demonstrate the probes for biosensing applications.

Photostable fluorescent probes based on multifunctional group substituted naphthalimide dyes for imaging of lipid droplets in live cells

We designed and synthesized multifunctional group substituted naphthalimide (MFGNI) dyes by introducing glycine ethyl ester and azetidine on 1,8-naphthalimide. With different azetidine substituents, the emission of the MFGNI dyes was shifted from blue to green. These MFGNI dyes exhibited high photoluminescence quantum yields (61% to 85%) and large Stokes shifts (67 nm). The amides and hydroxyl groups improved the photostability of the MFGNI dyes. Due to the small molecular weight and lipophilic properties, these MFGNI dyes specifically stained lipid droplets in living cells.

A responsive fluorescent probe for detecting and imaging pyruvate kinase M2 in live cells

In this study, we designed and testified a fluorescent probe zy-2 for specific and responsive imaging of pyruvate kinase M2 (PKM2), which can be excited by 419 nm light. A...

Twisted intramolecular charge transfer (TICT) and twists beyond TICT: from mechanisms to rational designs of bright and sensitive fluorophores

The twisted intramolecular charge transfer (TICT) mechanism has guided the development of numerous bright and sensitive fluorophores. This review briefly overviews the history of establishing the TICT mechanism, and systematically summarizes the molecular design strategies in modulating the TICT tendency of various organic fluorophores towards different applications, along with key milestone studies and representative examples. Additionally, we also succinctly review the twisted intramolecular charge shuttle (TICS) and twists during photoinduced electron transfer (PET), and compare their similarities and differences with TICT, with emphasis on understanding the structure-property relationships between the twisted geometries and how they can directly affect the fluorescence of the molecules. Such structure-property relationships presented herein will greatly aid the rational development of fluorophores that involve molecular twisting in the excited state.

Improving the fluorescence brightness of distyryl Bodipys by inhibiting the twisted intramolecular charge transfer excited state

A new class of NIR distyryl Bodipy fluorescent dyes were developed with sulfone- and quaternary ammonium-modified piperidines as auxochromes instead of conventional dialkylamino auxochromes. Such modification markedly improved the fluorescence quantum yields due to the efficient inhibition of the twisted intramolecular charge transfer (TICT) state. Based on the dye platform, we developed a new fluorescent H₂O₂ probe via self-immolative chemistry, and confirmed its capability to sensitively and selectively sense H₂O₂in vitro and in vivo.

Extremely Bright, Near-IR Emitting Spontaneously Blinking Fluorophores Enable Ratiometric Multicolor Nanoscopy in Live Cells

New bright, photostable, emission-orthogonal fluorophores that blink without toxic additives are needed to enable multicolor, live-cell, single-molecule localization microscopy (SMLM). Here we report the design, synthesis, and biological evaluation of Yale676sb, a photostable, near-IR-emitting fluorophore that achieves these goals in the context of an exceptional quantum yield (0.59). When used alongside HMSiR, Yale676sb enables simultaneous, live-cell, two-color SMLM of two intracellular organelles (ER + mitochondria) with only a single laser and no chemical additives.

Red- and Far-Red-Emitting Zinc Probes with Minimal Phototoxicity for Multiplexed Recording of Orchestrated Insulin Secretion

Zinc biology, featuring intertwining signaling networks and critical importance to human health, witnesses exciting opportunities in the big data era of physiology. Here, we report a class of red- and far-red-emitting Zn²⁺ probes with K_d values ranging from 190 nM to 74 μM, which are particularly suitable for real-time monitoring the high concentration of Zn²⁺ co-released with insulin during vesicular secretory events. Compared to the prototypical rhodamine-based Zn²⁺ probes, the new class exploits morpholino auxochromes which eliminates phototoxicity during long-term live recording of isolated islets. A Si-rhodamine-based Zn²⁺ probe with high turn-on ratio (>100), whose synthesis was enabled by a new route featuring late-stage N-alkylation, allowed simultaneous recording of Ca²⁺ influx, mitochondrial signal, and insulin secretion in isolated mouse islets. The time-lapse multicolor fluorescence movies and their analysis, enabled by red-shifted Zn²⁺ and other orthogonal physiological probes, highlight the potential impact of biocompatible fluorophores on the fields of islet endocrinology and system biology.

Direct Quantification and Visualization of Homocysteine, Cysteine, and Glutathione in Alzheimer's and Parkinson's Disease Model Tissues

Alzheimer's disease (AD) and Parkinson's disease (PD) are chronic neurodegenerative diseases with high morbidity and mortality. Homocysteine (Hcy), cysteine (Cys), and glutathione (GSH) are closely related to AD and PD. However, the dynamics of Hcy, Cys, and GSH in the brain tissues and the potential pathogenesis between Cys/Hcy/GSH with AD and PD remain unclear. Herein, a novel fluorescent probe 1 with multiple binding sites was rationally designed and exploited for the direct quantification of serum total Hcy and Cys along with superior optical properties. Importantly, differentiation and simultaneity fluorescence imaging of Cys, Hcy, and GSH dynamics were achieved in living cells, tissues, and mouse models of AD and PD with this probe, providing direct evidences for the relationship between Hcy/Cys/GSH and AD/PD for the first time. In addition, pathogenesis studies demonstrated that elevated Hcy and Cys levels are closely related to imbalanced redox homeostasis, increased amyloid aggregates, and nerve cell cytotoxicity. These findings will greatly promote the understanding of the functions of Hcy/Cys/GSH in Alzheimer's and Parkinson's diseases, demonstrating clinical promise for the early diagnosis and prevention of AD and PD.

An Overview of the Recent Developments in Carbon Quantum Dots—Promising Nanomaterials for Metal Ion Detection and (Bio)Molecule Sensing

The fluorescent carbon quantum dots (CQDs) represent an emerging subset of carbonaceous nanomaterials, recently becoming a powerful tool for biosensing, bioimaging, and drug and gene delivery. In general, carbon dots are defined as zero-dimensional (0D), spherical-like nanoparticles with <10 nm in size. Their unique chemical, optical, and electronic properties make CQDs versatile materials for a wide spectrum of applications, mainly for the sensing and biomedical purposes. Due to their good biocompatibility, water solubility, and relatively facile modification, these novel materials have attracted tremendous interest in recent years, which is especially important for nanotechnology and nanoscience expertise. The preparation of the biomass-derived CQDs has attracted growing interest recently due to their low-cost, renewable, and green biomass resources, presenting also the variability of possible modification for the enhancement of CQDs’ properties. This review is primarily focused on the recent developments in carbon dots and their application in the sensing of different chemical species within the last five years. Furthermore, special emphasis has been made regarding the green approaches for obtaining CQDs and nanomaterial characterization toward better understanding the mechanisms of photoluminescent behavior and sensing performance. In addition, some of the challenges and future outlooks in CQDs research have been briefly outlined.

Design, synthesis, and bioimaging applications of a new class of carborhodamines

We herein developed a new class of carborhodamines (CRs), i.e. 10-methoxy-substituted carborhodamines MCRs, by a simple synthesis procedure, which have absorption and emission wavelengths longer than classical CRs while retaining their excellent photophysical properties. Based on the MCR platform, we constructed the mitochondria-targeted fluorescent probe MCR-DMA and demonstrated its potential for sensing singlet oxygen (1O2) in living cells during the photodynamic therapy process.

Alkylaminomaleimide fluorophores: synthesis via air oxidation and emission modulation by twisted intramolecular charge transfer

A novel strategy to synthesize 3-alkylaminomaleimide fluorophores via air oxidation is developed, and the structural features for the designed TICT fluorophores with bright emission are established.

A novel ratiometric fluorescent probe for the detection of mitochondrial pH dynamics during cell damage

A sensitive fluorescent probe (E)-4-(3-(benzo[d]thiazol-2-yl)-4-hydroxy-5-methylstyryl)-1-methylpyridin-1-ium iodide (HBTMP) for the monitoring of pH in mitochondria was rationally exploited.

1,2,4,5-Tetrazine derivatives as components and precursors of photo- and electroactive materials

Synthetic approaches to 3,6-disubstituted-1,2,4,5-tetrazine systems are analyzed, and their properties attractive to practical applications in photo- and electroactive materials are overviewed.

Functionalized naphthalenediimide based supramolecular charge-transfer complexes via self-assembly and their photophysical properties

Two new intermolecular CT complexes having large Stokes shift (>170 nm) and significant fluorescence life-time (∼1.55 ns) have been prepared and exploited for cell imaging application.

Synthesis, characterization and optimization of in vitro properties of NIR-fluorescent cyclic α-MSH peptides for melanoma imaging

Melanoma are malignant tumors derived from melanocytes being responsible for the majority of skin cancer deaths with an increasing rate of incidence. The Melanocortin-1 receptor (MC1R) has been recognized as a molecular target for melanoma detection. Here, we report on the development and optimization of molecular probes which are based on novel conjugates of near-infrared (NIR) fluorescent indocyanine dyes and an MC1R-targeting peptide intended for optical fluorescence imaging enabling an early, specific, accurate and sensitive diagnosis of malignant melanomas. The introduction of anionic groups into the aromatic ring of the indolenine substructure of the conjugated dyes has shown to result in a strong fluorescence in aqueous solution and a concomitant increase of binding affinities of the peptide conjugates to the target receptor. The length and flexibility of the PEG chain introduced as a linker, as well as the nature of its attachment to the dye also affect the binding affinities, albeit to a lower extent. The conjugates have been successfully applied in the MC1R-specific staining of B16F10 melanoma cells, both in cell cultures and in microtome sections of solid tumors.

A Systematic Study of Coumarin-Tetrazine Light-Up Probes for Bioorthogonal Fluorescence Imaging

Fluorescent probes that light-up upon reaction with complementary bioorthogonal reagents are superior tools for no-wash fluorogenic bioimaging applications. In this work, a thorough study is presented on a set of seventeen structurally diverse coumarin-tetrazine probes that produce fluorescent dyes with exceptional turn-on ratios when reacted with trans-cyclooctene (TCO) and bicyclononyne (BCN) dienophiles. In general, formation of the fully aromatic pyridazine-containing dyes resulting from the reaction with BCN was found superior in terms of fluorogenicity. However, evaluation of the probes in cellular imaging experiments revealed that other factors, such as reaction kinetics and good cell permeability, prevail over the fluorescence turn-on properties. The best compound identified in this study showed excellent performance in live cell-labeling experiments and enabled no-wash fluorogenic imaging on a timescale of seconds.

Cyclooctatetraene-conjugated cyanine mitochondrial probes minimize phototoxicity in fluorescence and nanoscopic imaging

Modern fluorescence-imaging methods promise to unveil organelle dynamics in live cells. Phototoxicity, however, has become a prevailing issue when boosted illumination applies. Mitochondria are representative organelles whose research heavily relies on optical imaging, yet these membranous hubs of bioenergy are exceptionally vulnerable to photodamage. We report that cyclooctatetraene-conjugated cyanine dyes (PK Mito dyes), are ideal mitochondrial probes with remarkably low photodynamic damage for general use in fluorescence cytometry. In contrast, the nitrobenzene conjugate of Cy3 exhibits enhanced photostability but unaffected phototoxicity compared to parental Cy3. PK Mito Red, in conjunction with Hessian-structural illumination microscopy, enables 2000-frame time-lapse imaging with clearly resolvable crista structures, revealing rich mitochondrial dynamics. In a rigorous stem cell sorting and transplantation assay, PK Mito Red maximally retains the stemness of planarian neoblasts, exhibiting excellent multifaceted biocompatibility. Resonating with the ongoing theme of reducing photodamage using optical approaches, this work advocates the evaluation and minimization of phototoxicity when developing imaging probes.