Renewed Prospects for Organic Photovoltaics

Organic photovoltaics (OPVs) have progressed steadily through three stages of photoactive materials development: (i) use of poly(3-hexylthiophene) and fullerene-based acceptors (FAs) for optimizing bulk heterojunctions; (ii) development of new donors to better match with FAs; (iii) development of non-fullerene acceptors (NFAs). The development and application of NFAs with an A-D-A configuration (where A = acceptor and D = donor) has enabled devices to have efficient charge generation and small energy losses (E_loss < 0.6 eV), resulting in substantially higher power conversion efficiencies (PCEs) than FA-based devices. The discovery of Y6-type acceptors (Y6 = 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]-thiadiazolo[3,4-e]-thieno[2″,3″:4',5']thieno-[2',3':4,5]pyrrolo-[3,2-g]thieno-[2',3':4,5]thieno-[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) with an A-DA' D-A configuration has further propelled the PCEs to go beyond 15% due to smaller E_loss values (∼0.5 eV) and higher external quantum efficiencies. Subsequently, the PCEs of Y6-series single-junction devices have increased to >19% and may soon approach 20%. This review provides an update of recent progress of OPV in the following aspects: developments of novel NFAs and donors, understanding of the structure-property relationships and underlying mechanisms of state-of-the-art OPVs, and tasks underpinning the commercialization of OPVs, such as device stability, module development, potential applications, and high-throughput manufacturing. Finally, an outlook and prospects section summarizes the remaining challenges for the further development of OPV technology.

Review on Y6-Based Semiconductor Materials and Their Future Development via Machine Learning

Non-fullerene acceptors are promising to achieve high efficiency in organic solar cells (OSCs). Y6-based acceptors, one group of new n-type semiconductors, have triggered tremendous attention when they reported a power-conversion efficiency (PCE) of 15.7% in 2019. After that, scientists are trying to improve the efficiency in different aspects including choosing new donors, tuning Y6 structures, and device engineering. In this review, we first summarize the properties of Y6 materials and the seven critical methods modifying the Y6 structure to improve the PCEs developed in the latest three years as well as the basic principles and parameters of OSCs. Finally, the authors would share perspectives on possibilities, necessities, challenges, and potential applications for designing multifunctional organic device with desired performances via machine learning.

Recent Progress in the Design of Fused-Ring Non-Fullerene Acceptors-Relations between Molecular Structure and Optical, Electronic, and Photovoltaic Properties

Organic solar cells are on the dawn of the next era. The change of focus toward non-fullerene acceptors has introduced an enormous amount of organic n-type materials and has drastically increased the power conversion efficiencies of organic photovoltaics, now exceeding 18%, a value that was believed to be unreachable some years ago. In this Review, we summarize the recent progress in the design of ladder-type fused-ring non-fullerene acceptors in the years 2018-2020. We thereby concentrate on single layer heterojunction solar cells and omit tandem architectures as well as ternary solar cells. By analyzing more than 700 structures, we highlight the basic design principles and their influence on the optical and electrical structure of the acceptor molecules and review their photovoltaic performance obtained so far. This Review should give an extensive overview of the plenitude of acceptor motifs but will also help to understand which structures and strategies are beneficial for designing materials for highly efficient non-fullerene organic solar cells.

Compatibility between Solubility and Enhanced Crystallinity of Benzotriazole-Based Small Molecular Acceptors with Less Bulky Alkyl Chains for Organic Solar Cells

Optimizing the molecular structures of organic solar cell (OSC) materials and boosting the power conversion efficiencies are the eternal theme in the solar energy region. A series of fused benzotriazole (BTA)-based A-DA'D-A structures of nonfullerene acceptors (such as Y18) were developed for application in efficient OSCs, in which high quantum efficiencies and low voltage losses could be achieved because of the optimized electron-deficient core and specific molecular geometry. Here, based on the BTA core, the bulky alkyl chain on the BTA unit was further tailored to minimize the lateral alkyl chains and enhance the crystallinity while maintaining an adequate solubility. The resulting NFAs of BTA-C1, BTA-C5, and BTA-C6 are synthesized. Compared with the well-designed molecular Y18 (BTA-C8), we found that simply replacing the 2-ethylhexyl chain with a single methyl (BTA-C1) can easily improve the fill factor up to 77%, but its poor light absorption capacity and large domain size impeded further efficiency improvement. In particular, the BTA-C5, with a shortened branch alkyl chain of 2-methylbutyl, achieves suitable solubility and enhanced crystallinity. Significantly, owing to the balanced charge carrier mobility and suitable phase separation, the BTA-C5-based binary single-junction OSCs achieve a high efficiency of 17.11%, which is one of the top values in BTA-based OSCs.

Benzobis(Thiazole)-Based Conjugated Polymer with Varying Alkylthio Side-Chain Positions for Efficient Fullerene-Free Organic Solar Cells

Alkylthio groups can be used to modulate energy levels and molecular packing of organic semiconductors, which makes it important in the design of materials for organic solar cell. However, its effect has not been sufficiently exploited as most of the studies report introducing an alkylthio group to the donor unit and seldom to the acceptor unit of donor-acceptor conjugated polymers. In this report, two alkylthio-substituted polymers, namely, PBB-TSA and PBB-TSD, with benzo[1,2-d:4,5-d']bis(thiazole) (BBT) as the acceptor unit and benzo[1,2-b:4,5-b']dithiophene (BDT) as the donor unit, were rationally designed, synthesized, and applied in organic photovoltaics. An alkylthio side chain was substituted on the BBT-accepting unit for PBB-TSA, while for PBB-TSD, the alkylthio side chain was substituted on the BDT donor unit. PBB-TSA and PBB-TSD show upshifted and downshifted energy levels, respectively, compared to the nonsulfur-substituted material. Both polymers exhibit dominate face-on orientation, while PBB-TSD exhibits higher crystallinity compared to PBB-TSA. With the contribution of lower energy level and beneficial film morphology, the device based on PBB-TSD/IT-4F has much higher power conversion efficiency (PCE) of 14.6%, whereas the PBB-TSA blend had a lower PCE of 10.7%. 1,8-Diiodooctane can effectively optimize the blend film morphology, and the effect on device performance has also been demonstrated in detail. This result indicates that introducing an alkylthio side chain into the donor or acceptor moieties would result in materials with different energy levels and thus would be utilized to match with various acceptors, achieving optimized performance in organic solar cells.

Bromination and increasing the molecular conjugation length of the non-fullerene small-molecule acceptor based on benzotriazole for efficient organic photovoltaics

Two novel non-fullerene acceptors, namely BZIC-2Br and Y9-2Br, were synthesized by employing a ladder-type electron-deficient-based fused ring central with a benzotriazole core. Y9-2Br is obtained by extending the conjugate length of BZIC-2Br. Compared with BZIC-2Br, Y9-2Br possesses a lower optical bandgap of 1.32 eV with an absorption edge of 937 nm, exhibiting broader and stronger absorption band from 600 to 900 nm. Moreover, Y9-2Br exhibits excellent photovoltaic properties with V oc of 0.84 V, J sc of 21.38 mA cm-2 and FF of 67.11%, which achieves an impressive PCE of 12.05%. Our study demonstrates that bromination and effective extension of the conjugate length can modulate performance from different aspects to optimize photovoltaic characteristics.

In Silico Modeling of New "Y-Series"-Based Near-Infrared Sensitive Non-Fullerene Acceptors for Efficient Organic Solar Cells

This work was inspired by a previous report [Janjua, M. R. S. A. Inorg. Chem. 2012, 51, 11306-11314] in which the optoelectronic properties were improved with an acceptor bearing heteroaromatic rings. Herein, we have designed four novel Y-series non-fullerene acceptors (NFAs) by end-capped acceptor modifications of a recently synthesized 15% efficient Y21 molecule for better optoelectronic properties and their potential use in solar cell applications. Density functional theory (DFT) along with time-dependent density functional theory (TDDFT) at the B3LYP/6-31G(d,p) level of theory is used to calculate the band gap, exciton binding energy along with transition density matrix (TDM) analysis, reorganizational energy of electrons and holes, and absorption maxima and open-circuit voltage of investigated molecules. In addition, the PM6:YA1 complex is also studied to understand the charge shifting from the donor polymer PM6 to the NFA blend. Results of all parameters suggest that the DA'D electron-deficient core and effective end-capped acceptors in YA1-YA4 molecules form a perfect combination for effective tuning of optoelectronic properties by lowering frontier molecular orbital (FMO) energy levels, reorganization energy, and binding energy and increasing the absorption maximum and open-circuit voltage values in selected molecules (YA1-YA4). The combination of extended conjugation and excellent electron-withdrawing capability of the end-capped acceptor moiety in YA1 makes YA1 an excellent organic solar cell (OSC) candidate owing to promising photovoltaic properties including the lowest energy gap (1.924 eV), smallest electron mobility (λe = 0.0073 eV) and hole mobility (λh = 0.0083 eV), highest λmax values (783.36 nm (in gas) and 715.20 nm (in chloroform) with lowest transition energy values (E x) of 1.58 and 1.73 eV, respectively), and fine open-circuit voltage (V oc = 1.17 V) with respect to HOMOPM6-LUMOacceptor. Moreover, selected molecules are observed to have better photovoltaic properties than Y21, thus paving the way for experimentalists to look for future developments of Y-series-based highly efficient solar cells.

An asymmetric end-capping strategy enables a new non-fullerene acceptor for organic solar cells with efficiency over 10

Two different terminal groups, rhodanine-flanked benzo[c][1,2,5]thiadiazole (BR) and 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene)malononitrile (IM2F), were connected to an indaceno[1,2-b:5,6-b']dithiophene (IDT) core to construct a new non-fullerene acceptor (IDTBF). Solar cells based on this acceptor exhibited promising photovoltaic performances with a power conversion efficiency (PCE) of up to 10.43%.

A perylene diimide-containing acceptor enables high fill factor in organic solar cells

A fused-ring electron acceptor containing perylene diimide shows an extremely high fill factor of 81.3% in organic solar cells.

Achieving efficient polymer solar cells based on benzodithiophene–thiazole-containing wide band gap polymer donors by changing the linkage patterns of two thiazoles

Two conjugated polymers with different combinations of two thiazoles were synthesized to study their photovoltaic performances.