Mechanochemical Encapsulation of Caffeine in UiO-66 and UiO-66-NH2 to Obtain Polymeric Composites by Extrusion with Recycled Polyamide 6 or Polylactic Acid Biopolymer

The development of capsules with additives that can be added to polymers during extrusion processing can lead to advances in the manufacturing of textile fabrics with improved and durable properties. In this work, caffeine (CAF), which has anti-cellulite properties, has been encapsulated by liquid-assisted milling in zirconium-based metal-organic frameworks (MOFs) with different textural properties and chemical functionalization: commercial UiO-66, UiO-66 synthesized without solvents, and UiO-66-NH2 synthesized in ethanol. The CAF@MOF capsules obtained through the grinding procedure have been added during the extrusion process to recycled polyamide 6 (PA6) and to a biopolymer based on polylactic acid (PLA) to obtain a load of approximately 2.5 wt% of caffeine. The materials have been characterized by various techniques (XRD, NMR, TGA, FTIR, nitrogen sorption, UV-vis, SEM, and TEM) that confirm the caffeine encapsulation, the preservation of caffeine during the extrusion process, and the good contact between the polymer and the MOF. Studies of the capsules and PA6 polymer+capsules composites have shown that release is slower when caffeine is encapsulated than when it is free, and the textural properties of UiO-66 influence the release more prominently than the NH2 group. However, an interaction is established between the biopolymer PLA and caffeine that delays the release of the additive.

Nanoarchitectonics Design Strategy of Metal-Organic Framework and Bio-Metal-Organic Framework Composites for Advanced Wastewater Treatment through Adsorption

Freshwater depletion is an alarm for finding an eco-friendly solution to treat wastewater for drinking and domestic applications. Though several methods like chlorination, filtration, and coagulation-sedimentation are conventionally employed for water treatment, these methods need to be improved as they are not environmentally friendly, rely on chemicals, and are ineffective for all kinds of pollutants. These problems can be addressed by employing an alternative solution that is effective for efficient water treatment and favors commercial aspects. Metal organic frameworks (MOFs), an emerging porous material, possess high stability, pore size tunability, greater surface area, and active sites. These MOFs can be tailored; thus, they can be customized according to the target pollutant. Hence, MOFs can be employed as adsorbents that effectively target different pollutants. Bio-MOFs are a kind of MOFs that are incorporated with biomolecules, which also possess properties of MOFs and are used as a nontoxic adsorbent. In this review, we elaborate on the interaction between MOFs and target pollutants, the role of linkers in the adsorption of contaminants, tailoring strategy that can be employed on MOFs and Bio-MOFs to target specific pollutants, and we also highlight the effect of environmental matrices on adsorption of pollutants by MOFs.

COF-supported zirconium oxyhydroxide as a versatile heterogeneous catalyst for Knoevenagel condensation and nerve agent hydrolysis

A composite of catalytic Lewis acidic zirconium oxyhydroxides (8 wt %) and a covalent organic framework (COF) was synthesized. X-ray diffraction and infrared (IR) spectroscopy reveal that COF's structure is preserved after loading with zirconium oxyhydroxides. Electron microscopy confirms a homogeneous distribution of nano- to sub-micron-sized zirconium clusters in the COF. 3D X-ray tomography captures the micron-sized channels connecting the well-dispersed zirconium clusters on the COF. The crystalline ZrOx(OH)y@COF's nanostructure was model-optimized via simulated annealing methods. Using 0.8 mol % of the catalyst yielded a turnover number of 100-120 and a turnover frequency of 160-360 h-1 for Knoevenagel condensation in aqueous medium. Additionally, 2.2 mol % of catalyst catalyzes the hydrolysis of dimethyl nitrophenyl phosphate, a simulant of nerve agent Soman, with a conversion rate of 37% in 180 min. The hydrolytic detoxification of the live agent Soman is also achieved. Our study unveils COF-stabilized ZrOx(OH)y as a new class of zirconium-based Lewis + Bronsted-acid catalysts.

Transmission Porosimetry Study on High-quality Zr-fum-MOF Thin Films

Crystalline Zr-fum-MOF (MOF-801) thin films of high quality are prepared on glass and silicon substrates by direct growth under solvothermal conditions. The synthesis is described in detail and the influence of different synthesis parameters such as temperature, precursor concentration, and the substrate type on the quality of the coatings is illustrated. Zr-fum-MOF thin films are characterized in terms of crystallinity, porosity, and homogeneity. Dense films of optical quality are obtained. The sorption behavior of the thin films is studied with various adsorptives. It can be easily monitored by measuring the transmission of the films in gas flows of different compositions. This simple transmission measurement at only one wavelength allows a very fast evaluation of the adsorption properties of thin films as compared to traditional sorption methods. The sorption behavior of the thin films is compared with the sorption properties of Zr-fum-MOF powder samples.

An integrated life cycle assessment and techno-economic analysis: Evaluation on the production of polymers of intrinsic microporosity (PIM-1) and UiO-66-NH2 as membrane materials

Material synthesis requires an enormous amount of organic solvents which leads to huge environmental burdens. Being so, the necessity to utilize non-toxic chemicals is of growing interest in the global market. Harnessing a green fabrication strategy could be a sustainable remedy. Herein, life cycle assessment (LCA) and techno-economic assessment (TEA) using a cradle-to-gate approach to select the green synthesis route for the production of main components in mixed matrix membranes such as polymer and fillers were studied. Five representative synthesis routes of polymers of intrinsic microporosity (PIM-1) and fillers such as UiO-66-NH2 (UiO: University of Oslo) were conducted. Our findings revealed that the tetrachloroterephthalonitrile (TCTPN) synthesized PIM-1 using a novel approach (e.g., P5-Novel synthesis) and solvent-free synthesized UiO-66-NH2 (e.g., U5-Solvent-free) demonstrated the least environmental impact and are most economically feasible. The environmental burden and cost of PIM-1 synthesized by P5-Novel synthesis route decreased by 50 % and 15 %, respectively, while that of UiO-66-NH2 produced via U5-Solvent-free route reduced by 89 % and 52 %, respectively. Additionally, solvent reduction was found to have an apparent effect on cost-saving, whereby the production cost declined 13 % with a 30 % solvent reduction. Alleviation of environmental burdens could also be found through recovering solvents or substituting with a greener alternative (e.g., water). The fundamentals gained on the environmental impacts and economic feasibility of PIM-1 and UiO-66-NH2 production from this LCA-TEA study may provide a preliminary evaluation for the development of green and sustainable materials.

Review of Synthesis and Separation Application of Metal-Organic Framework-Based Mixed-Matrix Membranes

Metal-organic frameworks (MOFs) are porous crystalline materials assembled from organic ligands and metallic secondary building blocks. Their special structural composition gives them the advantages of high porosity, high specific surface area, adjustable pore size, and good stability. MOF membranes and MOF-based mixed-matrix membranes prepared from MOF crystals have ultra-high porosity, uniform pore size, excellent adsorption properties, high selectivity, and high throughput, which contribute to their being widely used in separation fields. This review summarizes the synthesis methods of MOF membranes, including in situ growth, secondary growth, and electrochemical methods. Mixed-matrix membranes composed of Zeolite Imidazolate Frameworks (ZIF), University of Oslo (UIO), and Materials of Institute Lavoisier (MIL) frameworks are introduced. In addition, the main applications of MOF membranes in lithium-sulfur battery separators, wastewater purification, seawater desalination, and gas separation are reviewed. Finally, we review the development prospects of MOF membranes for the large-scale application of MOF membranes in factories.

Metal-Organic Framework-Based Colloidal Particle Synthesis, Assembly, and Application

Metal-organic frameworks (MOFs) assembled from metal nodes and organic ligands have received significant attention over the past two decades for their fascinating porous properties and broad applications. Colloidal MOFs (CMOFs) not only inherit the intrinsic properties of MOFs, but can also serve as building blocks for self-assembly to make functional materials. Compared to bulk MOFs, the colloidal size of CMOFs facilitates further manipulation of CMOF particles in a single or collective state in a liquid medium. The resulting crystalline order obtained by self-assembly in position and orientation can effectively improve performance. In this review, we summarize the latest developments of CMOFs in synthesis strategies, self-assembly methods, and related applications. Finally, we discuss future challenges and opportunities of CMOFs in synthesis and assembly, by which we hope that CMOFs can be further developed into new areas for a wider range of applications.

Effect of Modulation and Functionalization of UiO-66 Type MOFs on Their Surface Thermodynamic Properties and Lewis Acid–Base Behavior

In this study, we investigated the surface thermodynamic properties of four MOF structures of the UiO-66 series, by employing seven molecular models, a thermal model, and three other methods using the inverse gas chromatography (IGC) technique at infinite dilution. We first determined the effect of the modulation of UiO-66 by an acid (e.g., formic acid and acetic acid) and on the other hand, we studied the effect of the functionalization of the organic linker by an amine group (NH2) on their dispersive component of the surface energy and on their Lewis acid–base properties. We found that all the studied MOFs presented an amphoteric character with a strong acidity whose acidity/basicity ratio is greater than 1 using all the models and methods in IGC. Moreover, the introduction of a modulator such as acetic acid or formic acid in the synthesis of these MOFs increased the number of structural defects and therefore increased the acidity of these MOFs. Similarly, the functionalization of the MOF by the NH2 group leads to an increase in the basicity constant of the functionalized MOF while remaining smaller than their acidity constant. In addition, the use of acids as modulators and amine groups as functional groups resulted in an increase in the dispersive component of the surface energy of the MOFs. Finally, comparing the results obtained by the different models and methods and based on the increasing order of the acidity of each MOF, it was clear that the thermal model resulted in more exact and precise values than the others. Our findings pave the way for the design and development of new acid catalysts based on UiO-66 structures.

Synthesis and shaping of metal-organic frameworks: a review

Metal-organic frameworks (MOFs) possess excellent advantages, such as high porosity, large specific surface area, and an adjustable structure, showing good potential for applications in gas adsorption and separation, catalysis, conductivity, sensing, magnetism, etc. However, they still suffer from significant limitations in terms of the scale-up synthesis and shaping, hindering the realization of large-scale commercial applications. Despite some attempts having been devoted to addressing this, challenges remain. In this paper, we outline the advantages and drawbacks of existing synthetic routes such as electrochemistry, microwave, ultrasonic radiation, green solvent reflux, room temperature stirring, steam-assisted transformation, mechanochemistry, and fluid chemistry in terms of scale-up production. Then, the shaping methods of MOFs such as extrusion, mechanical compaction, rolling granulation, spray drying, gel technology, embedded granulation, phase inversion, 3D printing and other shaping methods for the preparation of membranes, coatings and nanoparticles are discussed. Finally, perspectives on the large-scale synthesis and shaping of MOFs are also proposed. This work helps provide in-depth insight into the scale-up production and shaping process of MOFs and boost commercial applications of MOFs.

High-yield halide-assisted synthesis of metal-organic framework UiO-based nanocarriers

The synthesis of nanosized metal-organic frameworks (NMOFs) is requisite for their application as injectable drug delivery systems (DDSs) and other biorelevant purposes. Herein, we have critically examined the role of different synthetic parameters leading to the production of UiO-66 crystals smaller than 100 nm. Of note, we demonstrate the co-modulator role conferred by halide ions, not only to produce NMOFs with precise morphology and size, but also to significantly improve the reaction yield. The resulting NMOFs are highly crystalline and exhibit sustained colloidal stability in different biologically relevant media. As a proof of concept, these NMOFs were loaded with Rhodamine 6G (R6G), which remained trapped in most common biologically relevant media. When incubated with living mammalian cells, the R6G-loaded NMOFs were efficiently internalized and did not impair cell viability even at relatively high doses.

Effective Degradation of Novichok Nerve Agents by the Zirconium Metal-Organic Framework MOF-808

Novichoks are a novel class of nerve agents (also referred to as the A-series) that were employed in several poisonings over the last few years. This calls for the development of novel countermeasures that can be applied in protective concepts (e.g., protective clothing) or in decontamination methods. The Zr metal-organic framework MOF-808 has recently emerged as a promising catalyst in the hydrolysis of the V- and G-series of nerve agents as well as their simulants. In this paper, we report a detailed study of the degradation of three Novichok agents by MOF-808 in buffers with varying pH. MOF-808 is revealed to be a highly efficient and regenerable catalyst for Novichok agent hydrolysis under basic conditions. In contrast to the V- and G-series of agents, degradation of Novichoks is demonstrated to proceed in two consecutive hydrolysis steps. Initial extremely rapid P-F bond breaking is followed by MOF-catalyzed removal of the amidine group from the intermediate product. The intermediate thus acted as a competitive substrate that was rate-determining for the whole two-step degradation route. Under acidic conditions, the amidine group in Novichok A-230 is more rapidly hydrolyzed than the P-F bond, giving rise to another moderately toxic intermediate. This intermediate could in turn be efficiently hydrolyzed by MOF-808 under basic conditions. These experimental observations were corroborated by density functional theory calculations to shed light on molecular mechanisms.

An efficient modulated synthesis of zirconium metal–organic framework UiO-66

The use of large amounts of deleterious solvents in the synthesis of metal–organic frameworks (MOFs) is one of the important factors limiting their application in industry.

The chemistry behind room temperature synthesis of hafnium and cerium UiO-66 derivatives

RT formation of Hf and Ce UiO-66 derivatives is investigated using a one-step method where the linker and metal salt are simply combined, and a two-step method where the inorganic component is pre-heated to form metal clusters.

"Shake 'n Bake" Route to Functionalized Zr-UiO-66 Metal-Organic Frameworks

We report a novel synthetic procedure for the high-yield synthesis of metal-organic frameworks (MOFs) with fcu topology with a UiO-66-like structure starting from a range of commercial ZrIV precursors and various substituted dicarboxylic linkers. The syntheses are carried out by grinding in a ball mill the starting reagents, namely, Zr salts and the dicarboxylic linkers, in the presence of a small amount of acetic acid and water (1 mL total volume for 1 mmol of each reagent), followed by incubation at either room temperature or 120 °C. Such a simple "shake 'n bake" procedure, inspired by the solid-state reaction of inorganic materials, such as oxides, avoids the use of large amounts of solvents generally used for the syntheses of Zr-MOF. Acidity of the linkers and the amount of water are found to be crucial factors in affording materials of quality comparable to that of products obtained under solvo- or hydrothermal conditions.

Enhancing toxic gas uptake performance of Zr-based MOF through uncoordinated carboxylate and copper insertion; ammonia adsorption

This study reports the development of a new type of Zr-based MOF by inserting copper and carboxylate into HCl modulated UiO-67 (UiO-67-vac) which gained higher surface area/vacant than UiO-67. Copper was inserted into MOF containing uncoordinated carboxylate group, to create open metal site in the form of -COOCu which called UiO-67-ox-Cu. PXRD, FTIR, BET, SEM, EDS, UV-Vis and XPS were used to characterize the obtained MOFs. As expected, UiO-67-ox-Cu exhibits the highest ammonia capacity (178.3 mg/g) among UiO-67 (104 mg/g) and UiO-67-vac (121 mg/g) at 298 K and 1 bar pressure. In fact, the significant increase in ammonia uptake of UiO-67-ox-Cu is related to the modified binding affinity of -COOCu groups with ammonia. Moreover, UiO-67-vac with the highest surface area showed the hydrogen adsorption capacity of 18.75 mg/g at 77 K, which is comparable or even superior to the previously reported value. Interestingly, adsorption capacities were retained with slight changes around five cycles and three regeneration temperatures, 25, 60 and 120 °C under vacuum pressure which were proved by PXRD after ammonia adsorption/desorption. The good results obtained in the current work clearly show the role of postsynthesis functionalization approach for creation of new metal/active sites into MOFs.

Boosting Ammonia Uptake within Metal-Organic Frameworks by Anion Modulating Strategy

Ammonia with toxic and corrosive features needs advanced protective materials and removal tools, although it is a vital component in human food supply processes. So, to satisfy these requirements, materials with high adsorption capacity and affinity for ammonia should be developed. The present research has been focused on a series zinc-based metal-organic frameworks (MOF) containing mixed ligands, biphenyl dicarboxylic acid (BPDA) and tris(4-(4H-1,2,4-triazol-4-yl)phenyl)amine (TTPA), which are modulated by different anions including CH₃COO^-, CF₃COO^-, and CF₃SO₃^-. Ammonia uptake capacity was measured via static and dynamic conditions under 50% relative humidity. Among all compounds, CF₃SO₃^- anion could enhance the ammonia uptake capacity of MOFs up to 177.85 and 349 mg/g during static and breakthrough measurements, respectively, so that 83.30% of the total uptake capacity (at P/P_o = 1.0 and 298 K) was achieved at low relative pressure range (up to 0.1). The isosteric heats of ammonia adsorption on PFC-27 and derivatives were calculated in the range of 7.03-10.16 kJ mol^-1 so that they increased upon CF₃SO₃^-, CF₃COO^-, and CH₃COO^- ion incorporation. This is potentially beneficial for enhanced ammonia adsorption. Interestingly, adsorption capacities were retained with only slight changes after five cycles and three regeneration temperatures, 25 °C, 60 °C, and 120 °C, under vacuum. The special affinity for NH₃ adsorption and MOF phase stability after desorption is clearly proved by FTIR spectra and PXRD analysis, respectively. Generally, the results suggest that ion insertion modification is an efficient strategy for enhancement of MOF adsorption performance.

A Showcase of Green Chemistry: Sustainable Synthetic Approach of Zirconium-Based MOF Materials

Zirconium-based metal-organic framework materials (Zr-MOFs) have more practical usage over most conventional benchmark porous materials and even many other MOFs due to the excellent structural stability, rich coordination forms, and various active sites. However, their mass-production and application are restricted by the high-cost raw materials, complex synthesis procedures, harsh reaction conditions, and unexpected environmental impact. Based on the principles of "Green Chemistry", considerable efforts have been done for breaking through the limitations, and significant progress has been made in the sustainable synthesis of Zr-MOFs over the past decade. In this review, the advancements of green raw materials and green synthesis methods in the synthesis of Zr-MOFs are reviewed, along with the corresponding drawbacks. The challenges and prospects are discussed and outlooked, expecting to provide guidance for the acceleration of the industrialization and commercialization of Zr-MOFs.

The state of the field: from inception to commercialization of metal–organic frameworks

We provide a brief overview of the state of the MOF field from their inception to their synthesis, potential applications, and finally, to their commercialization.

Continuous and Rapid Synthesis of UiO-67 by Electrochemical Methods for the Electrochemical Detection of Hydroquinone

Continuous and rapid synthesis of UiO-67 under mild conditions has been achieved by electrochemical methods for the first time. In the reaction system, a zirconium sheet was utilized as electrodes and a metal source for the assembly of UiO-67. High-crystalline UiO-67 with a regular tetrahedral morphology of around 1 μm was obtained within 1.5 h under the optimized solvent composition, voltage, and temperature conditions. This electrochemical synthetic method of UiO-67 in our work overcomes the shortcomings of high temperature and pressure of a traditional solvothermal method, which proposes new ideas for the large-scale and rapid synthesis of UiO-67. The UiO-67 synthesized by an electrochemical method was prepared as a UiO-67-carbon paste electrode (CPE), which exhibited a linear response to hydroquinone (HQ) in the range of 5-300 μM with a detection limit of 3.6 × 10^-9 M (S/N = 3), for the electrochemical detection of HQ. It was confirmed that UiO-67-CPE possessed excellent reusability and antiinterference ability for the detection of HQ, and its detection ability even did not change after standing for 3 months. We further tried to apply UiO-67-CPE to the practical determination of HQ in tap water and river water samples, and the results proved that the recovery rate is 97.9-104.7% in real samples.

Room temperature aqueous synthesis of UiO-66 derivatives via postsynthetic exchange

Herein, we report the room temperature aqueous synthesis of the Zr(iv)-based metal-organic framework (MOF) UiO-66 and a series of functionalized derivatives through postsynthetic exchange (PSE) from a perfluorinated UiO-66-F₄.

Interplay of Lewis and Brønsted Acid Sites in Zr-Based Metal-Organic Frameworks for Efficient Esterification of Biomass-Derived Levulinic Acid

We report the performance of UiO-66 and its Brønsted acid functionalized derivative, UiO-66-(COOH)₂, as heterogeneous catalysts for levulinic acid esterification with ethanol. Importantly, compared with UiO-66, UiO-66-(COOH)₂ displayed superior catalytic performance (up to 97.0 ± 1.1% yield of ethyl levulinate) attributed to the synergistic effect between Lewis acidic Zr clusters and Brønsted acidic -COOH groups. Furthermore, UiO-66-(COOH)₂ was stable and reusable without an appreciable loss in catalytic activity for at least five consecutive cycles. This study demonstrates that the interplay of Brønsted and Lewis acid sites in zirconium metal-organic frameworks leads to more efficient catalytic conversion of a biomass feedstock to biofuel, and with further hypothesis driven research, additional materials that show promise as candidates for catalytic conversion of biomass feedstocks to biofuels and valuable chemicals can be developed.

Green Synthesis of a Functionalized Zirconium-Based Metal–Organic Framework for Water and Ethanol Adsorption

Aqueous synthesis of metal–organic frameworks (MOFs) at room temperature offers many advantages such as reduction in the generation of toxic byproducts and operation costs, as well as increased safety in the material’s production. Functional group-bearing MOFs have received growing attention compared to nonfunctionalized analogues due to enhanced adsorption properties of the former in many cases. Here, we report an aqueous solution-based synthesis of a robust zirconium MOF, UiO-66-NO2, at room temperature. We evaluated the phase purity, porosity, thermal stability, particle morphology and size of the resulting material. High uptake, as well as near complete recyclability of water and ethanol vapor isotherms at room temperature supports the potential of UiO-66-NO2 as a solid adsorbent in adsorption-based cooling applications or water harvesting systems.