Vapochromic crystals: understanding vapochromism from the perspective of crystal engineering

Macrocycle-Based Charge Transfer Cocrystals with Dynamically Reversible Chiral Self-Sorting Display Chain Length-Selective Vapochromism to Alkyl Ketones

Chirality-driven self-sorting plays an essential role in controlling the biofunction of biosystems, such as the chiral double-helix structure of DNA from self-recognition by hydrogen bonding. However, achieving precise control over the chiral self-sorted structures and their functional properties for the bioinspired supramolecular systems still remains a challenge, not to mention realizing dynamically reversible regulation. Herein, we report an unprecedented saucer[4]arene-based charge transfer (CT) cocrystal system with dynamically reversible chiral self-sorting synergistically induced by chiral triangular macrocycle and organic vapors. It displays efficient chain length-selective vapochromism toward alkyl ketones due to precise modulation of optical properties by vapor-induced diverse structural transformations. Experimental and theoretical studies reveal that the unique vapochromic behavior is mainly attributed to the formation of homo- or heterochiral self-sorted assemblies with different alkyl ketone guests, which differ dramatically in solid-state superstructures and CT interactions, thus influencing their optical properties. This work highlights the essential role of chiral self-sorting in controlling the functional properties of synthetic supramolecular systems, and the rarely seen controllable chiral self-sorting at the solid-vapor interface deepens the understanding of efficient vapochromic sensors.

The Photosalient Effect and Thermochromic Luminescence Based on o-Carborane-Assisted π-Stacking in the Crystalline State

Herein, we report the unique multiple-stimuli responsiveness of anthracene-tethered o-carborane derivatives. We designed and synthesized anthracene derivatives with different substitution positions and numbers of the o-carborane units. Two compounds had characteristic crystal structures involving the columnar π-stacking structures of the anthracene units. From the analysis of crystalline-state structure-property relationships, it was revealed that the crystals exhibited the photosalient effect accompanied by photochemical [4+4] cycloaddition reactions and temperature-dependent photophysical dual-emission properties including excimer emission of anthracene. Those properties were considered as non-radiative and radiative deactivation pathways through the excimer formation in the excited state and the formation of excimer species was facilitated by the π-stacking structure of anthracene units. Moreover, we found unusual temperature dependency on the occurrence of the photosalient effect. According to the data from variable temperature X-ray crystallography, a strong correlation between lattice shrinkage and strain accumulation is suggested.

Separation of benzene and toluene associated with vapochromic behaviors by hybrid[4]arene-based co-crystals

The combination of macrocyclic chemistry with co-crystal engineering has promoted the development of materials with vapochromic behaviors in supramolecular science. Herein, we develop a macrocycle co-crystal based on hybrid[4]arene and 1,2,4,5-tetracyanobenzene that is able to construct vapochromic materials. After the capture of benzene and toluene vapors, activated hybrid[4]arene-based co-crystal forms new structures, accompanied by color changes from brown to yellow. However, when hybrid[4]arene-based co-crystal captures cyclohexane and pyridine, neither structures nor colors change. Interestingly, hybrid[4]arene-based co-crystal can separate benzene from a benzene/cyclohexane equal-volume mixture and allow toluene to be removed from a toluene/ pyridine equal-volume mixture with purities reaching 100%. In addition, the process of adsorptive separation can be visually monitored. The selectivity of benzene from a benzene/cyclohexane equal-volume mixture and toluene from a toluene/ pyridine equal-volume mixture is attributed to the different changes in the charge-transfer interaction between hybrid[4]arene and 1,2,4,5-tetracyanobenzene when hybrid[4]arene-based co-crystal captures different vapors. Moreover, hybrid[4]arene-based co-crystal can be reused without losing selectivity and performance. This work constructs a vapochromic material for hydrocarbon separation.

Keto-Adamantane-Based Macrocycle Crystalline Supramolecular Assemblies Showing Selective Vapochromism to Tetrahydrofuran

Here, we report the synthesis of adamantane-based macrocycle 2 by combining adamantane building blocks with π-donor 1,3-dimethoxy-benzene units. An unpredictable keto-adamantane-based macrocycle 3 was obtained by the oxidation of 2 using DDQ as an oxidant. Moreover, a new type of macrocyclic molecule-based CT cocrystal was prepared through exo-wall CT interactions between 3 and DDQ. The cocrystal material showed selective vapochromism behavior towards THF, specifically, among nine volatile organic solvents commonly used in the laboratory. Powder X-ray diffraction; UV-Vis diffuse reflectance spectroscopy; 1H NMR; and single crystal X-ray diffraction analyses revealed that color changes are attributed to the vapor-triggered decomplexation of cocrystals.

Mechanistic Insights into Anion-Induced Electrochromism of Ru(II)-Based Metallo-Supramolecular Polymer

The metallo-supramolecular polymer (MSP) is considered one of the most promising electrodes for electrochromic devices due to its intrinsically stable redox properties. Nevertheless, despite extensive work focusing on improving the electrochromic and electrochemical properties of MSPs, little experimental evidence exists from in-depth investigations on the anion-induced electrochromism of MSPs. Herein, Ru-based metallo-supramolecular polymer (polyRu) films with excellent electrochromic performance were fabricated through a novel electrochemical deposition method, and the electrochromic mechanism was further understood. The polyRu films possess fast reaction kinetics with a short switching time of 4.0 s (colored) and 2.8 s (bleached) and highly reversible redox properties due to the resulting impacts on the capacitive behaviors (containing surface, near-surface and intercalation pseudo-capacitance) of the perchlorate ions in the electrochromic process. Moreover, the electrochromic degradation of the polyRu films is considered to stem from the numerous nanopores in the film induced by ClO4- transport and the exchange of counter anions from Cl- to ClO4-. In addition, a physical model, revealing the transport of conduction ions and the evolution of the structure and properties of the polyRu film during the electrochromic process, is presented. It is observed that the charge balance of Ru3+ and Ru2+, achieved through the adsorption/desorption of ClO4- on the film, provides electrochromic and electrochemical reversibility to the polyRu film under positive/negative bias. Correspondingly, a transformation from polyRu·(Cl-)2n to polyRu·(ClO4-)x(Cl-)2n-x in the polyRu film is induced by a counter anion exchange from Cl- to ClO4-. Revealing the detailed perchlorate ion transfer kinetics and electrochromic mechanism in this film can offer new insights into the application of metallo-supramolecular polymers in electrochromic devices.

Stimuli-Responsive Properties on a Bisbenzofuropyrazine Core: Mechanochromism and Concentration-Controlled Vapochromism

Stimulus-responsive organic materials with luminescence switching properties have attracted considerable attention for their practical applications in sensing, security, and display devices. In this paper, bent-type bisbenzofuropyrazine derivatives, Bent-H and Bent-sBu, with good solubilities were synthesized, and their physical and optical properties were investigated in detail. Bent-H gave three crystalline polymorphs, and they showed different luminescence properties depending on their crystal packing structures. In addition, Bent-H exhibited mechanochromic luminescence in spite of its rigid skeleton. Bent-sBu exhibited unique concentration-dependent vapochromic luminescence. Ground Bent-sBu was converted to blue-emissive, green-emissive, and green-emissive high-viscosity solution states at low, moderate, and high concentrations of CHCl3 vapor, respectively. This finding represents a concentration-dependent multi-phase transition with an organic solvent, which is of potent interest for application in sensing systems.

Woven organic crystals

Woven architectures are prepared by physical entanglement of fibrous components to expand one-dimensional material into two-dimensional sheets with enhanced strength and resilience to wear. Here, we capitalize on the elastic properties of long organic crystals with a high aspect ratio to prepare an array of centimeter-size woven network structures. While being robust to mechanical impact, the woven patches are also elastic due to effective stress dissipation by the elasticity of the individual warp and weft crystals. The thermal stability of component crystals translates into favorable thermoelastic properties of the porous woven structures, where the network remains elastic over a range of 300 K. By providing means for physical entanglement of organic crystals, the weaving circumvents the natural limitation of the small size of slender organic crystals that is determined by their natural growth, thereby expanding the prospects for applications of organic crystals from one-dimensional entities to expandable, two-dimensional robust structures.

Smart organic materials based on macrocycle hosts

Innovative design of smart organic materials is of great importance for the advancement of modern technology. Macrocycle hosts, possessing cyclic skeletons, intrinsic cavities, and specific guest binding properties, have demonstrated pronounced potential for the elaborate fabrication of a variety of functional organic materials with smart stimuli-responsive characteristics. In this tutorial review, we outline the current development of smart organic materials based on macrocycle hosts as key building blocks, focusing on the design principles and functional mechanisms of the tailored systems. Three main types of macrocycle-based smart organic materials are exemplified as follows according to the distinct forms of construction patterns: (1) supramolecular polymeric materials and nanoassemblies; (2) adaptive molecular crystals; (3) smart porous organic materials. The responsive performances of macrocycle-containing smart materials in versatile aspects, including mechanically adaptive polymers, soft optoelectronic devices, data encryption, drug delivery systems, artificial transmembrane channels, crystalline-state gas adsorption/separation, and fluorescence sensing, are illustrated by discussing the representative studies as paradigms, where the roles of macrocycles in these systems are highlighted. We also provide in the conclusion part the perspectives and remaining challenges in this burgeoning field.

Grinding-induced supramolecular charge-transfer assemblies with switchable vapochromism toward haloalkane isomers

Synthetic macrocycles have proved to be of great application value in functional charge-transfer systems in the solid state in recent years. Here we show a switchable on-off type vapochromic system toward 1-/2-bromoalkane isomers by constructing solid-state charge-transfer complexes between electron-rich perethylated pillar[5]arene and electron-deficient aromatic acceptors including 4-nitrobenzonitrile and 1,4-dinitrobenzene. These charge-transfer complexes with different colors show opposite color changes upon exposure to the vapors of 1-bromoalkanes (fading) and 2-bromoalkanes (deepening). Single-crystal structures incorporating X-ray powder diffraction and spectral analyses demonstrate that this on-off type vapochromic behavior is mainly attributed to the destruction (off) and reconstruction (on) of the charge-transfer interactions between perethylated pillar[5]arene and the acceptors, for which the competitive host-guest binding of 1-bromoalkanes and the solid-state structural transformation triggered by 2-bromoalkanes are respectively responsible. This work provides a simple colorimetric method for distinguishing positional isomers with similar physical and chemical properties.

One stimulus-induced two-step photophysical response with high contrast and tunable switching time for dynamic displaying

One stimulus-induced two-step photophysical response, especially with tunable switching time, is a great challenge for organic chromophores. Herein, a polymorphic material 2,7-DCF could undergo in situ two sequential dual-channel responses upon dichloromethane fuming. Both the appearance color and the fluorescence change from red to yellow to deep red with high contrast. The first step corresponds to a fast amorphous-to-crystalline transformation, while the second is a slow solid-state cocrystallization process. Based on single crystal structures and theoretical calculations, such distinct color changes are mainly attributed to conformation twisting and the electron coupling with incorporated solvent molecule through C-H⋅⋅⋅O interaction. Importantly, the second slow photophysical response could be drastically sped up by seeding strategy, or be totally inhibited. Such characteristics pave a way for the potential applications in dynamic anti-counterfeiting and data encryption. Based on the two-step transformation, polymorph 2,7-DCF-a could achieve a successive four-level response to external stimuli. In contrast, polymorph 2,7-DCF-d exhibits a stepwise hypsochromic fluorescence shift over 100 nm. This study would significantly promote the development of stimuli-sensitive systems from "one stimulus, one-step response" to "one stimulus, two or multi-step response".

Triggering the Vapochromic Behavior in C60 via the Supramolecular Wrapping of st-PMMA

Understanding the physicochemical modulation of functional molecules is the primary step in exploring novel stimuli-responsive materials, and preventing the π-π stacking configuration of π-conjugated molecules has been an effective strategy of vapochromic material development, such as of nanoporous frameworks. Nevertheless, the more complicated synthetic strategy should in fact be applied in many circumstances. In this study, we explore a facile supramolecular strategy where the commodity plastic, syndiotactic-poly(methyl methacrylate) (st-PMMA), is utilized to wrap C₆₀ to form the inclusion complex. The structural characterization revealed that C₆₀s in the st-PMMA supramolecular helix had a lower coordination number (CN = 2) compared to the face-centered-cubic packing of pure C₆₀s (CN = 12). Since the st-PMMA/C₆₀ helical complex has structural flexibility, the π-π stacking structure of C₆₀ was further interrupted by the intercalation of toluene vapors, and the complete isolation of C₆₀ in the complex induced the desired vapochromic behavior. Furthermore, the aromatic interaction between C₆₀ and aromatic solvent vapors enabled the st-PMMA/C₆₀ inclusion complex to selectively encapsulate chlorobenzene, toluene, etc., and induce the color change. The st-PMMA/C₆₀ inclusion complex exhibited a transparent film of sufficient structural integrity such that it can still induce a reversible color change after several cycles. As a result, a new strategy has been discovered for the development of novel vapochromic materials via host-guest chemistry.

Multi-Stimuli-Responsive Amphiphilic Pyridinium Salt and Its Application in the Visualization of Level 3 Details in Latent Fingerprints

Organic luminescent materials that can simultaneously achieve multimode mechanochromism and its water-vapor-induced recovery are desirable for practical applications but rarely reported. Herein, an amphiphilic compound, 4-(9H-carbazol-9-yl)-1-(2-hydroxyethyl)pyridin-1-ium bromide (CPAB), is designed by integrating a lipophilic aromatic unit and hydrophilic end in the molecular architecture. Self-recovered mechanochromism from brown to cyan is observed upon mechanical grinding in air. Comprehensive research by X-ray diffraction, infrared spectroscopy, and single-crystal analysis reveals that the photoluminescence switch originates from the variation in intermolecular hydrogen bonds and molecular packing mode. The amphiphilic nature of CPAB allows water molecules to enter the crystalline lattice, forming two polymorphs of the crystalline phase, namely CPAB-D and CPAB-W. The hydrosoluble CPAB exhibits excellent capability in probing the level 3 details of fingerprints because its lipophilic part can target the fatty acid residues of fingerprints, leading to strong aggregation-induced fluorescence. The research may inspire the design of latent fingerprint developers and application in forensics/anti-counterfeiting.

Conformation- and Coordination Mode-Dependent Stimuli-Responsive Salicylaldehyde Hydrazone Zn(II) Complexes

Luminescent Zn(II) complexes that respond to external stimuli are of wide interest due to their potential applications. Schiff base with O,N,O-hydrazone shows excellent luminescence properties with multi-coordination sites for different coordination modes. In this work, three salicylaldehyde hydrazone Zn(II) complexes (1, 2a, 2b) were synthesized and their stimuli-responsive behaviors in different states were explored. Only complex 1 exhibits reversible and self-recoverable photochromic and photoluminescence properties in solution. This may be due to the configuration eversion and the excited-state intramolecular proton transfer (ESIPT) process. In the solid state, 2a has obvious mechanochromic luminescence property, which is caused by the destruction of intermolecular interactions and the transformation from crystalline state to amorphous state. 2a and 2b have delayed fluorescence properties due to effective halogen bond interactions in structures. 2a could undergo crystal-phase transformation into its polymorphous 2b by force/vapor stimulation. Interestingly, 2b shows photochromic property, which can be attributed to the electron transfer and generation of radicals induced by UV irradiation. Due to different conformations and coordination modes, the three Zn(II) complexes show different stimuli-responsive properties. This work presents the multi-stimuli-responsive behaviors of salicylaldehyde hydrazone Zn(II) complexes in different states and discusses the response mechanism in detail, which may provide new insights into the design of multi-stimuli-responsive materials.

Macrocycle-Based Crystalline Supramolecular Assemblies Built with Intermolecular Charge-Transfer Interactions

Synthetic macrocycles have served as principal tools for supramolecular chemistry, have greatly extended the scope of organic charge transfer (CT) complexes, and have proved to be of great practical value in the solid state during the past few years. In this Minireview, we summarize the research progress on the macrocycle-based crystalline supramolecular assemblies primarily driven by intermolecular CT interactions (a.k.a. macrocycle-based crystalline CT assemblies, MCCAs for short), which are classified by their donor-acceptor (D-A) constituent elements, including simplex macrocyclic hosts, heterogeneous macrocyclic hosts, and host-guest D-A pairs. Particular attention will be focused on their diverse functions and applications, as well as the underlying CT mechanisms from the perspective of crystal engineering. Finally, the remaining challenges and prospects are outlined.

Cooperative Photochemical Reaction Kinetics in Organic Molecular Crystals

Photoreactive molecular crystals have been intensively investigated as next-generation functional materials. Changes in physicochemical properties are usually interpreted in terms of static pre- and post-reaction molecular structures and packings determined by X-ray structure analysis. However, to elucidate the dynamic properties, it is necessary to understand the dynamic nature of photochemical kinetics in crystals. Reaction dynamics in the crystal phase can be dramatically different from those in dilute solution because the local molecular environment evolves as the surrounding reactant molecules are transformed into products. In this Review article, we summarize multiple examples of photochemical reactions in the crystalline phase that do not follow classical kinetic behavior. We also discuss different theoretical methods that can be used to describe this behavior. This Review article should help provide a foundation for future workers to understand and analyze photochemical reaction kinetics in crystals.

A Novel Photoluminescent Ag/Cu Cluster Exhibits a Chromic Photoluminescence Response towards Volatile Organic Vapors

A new Ag/Cu bimetallic cluster [Ag₁₀Cu₆(bdppthi)₂(C≡CPh)₁₂(EtOH)₂](ClO₄)₄ (1, bdppthi = N,N'-bis(diphenylphosphanylmethyl)-tetrahydroimidazole) exhibited strong phosphorescent (PL) emission at 644 nm upon excitation at 400 nm. Removal of the coordinated EtOH molecules in 1 resulted in derivative 1a, which exhibited significant red-shifted emission at 678 nm. The structure and PL of 1 was restored on exposure to EtOH vapor. Cluster 1a also exhibited a vapor-chromic PL response towards other common organic solvent vapors including acetone, MeOH and MeCN. A PMMA film of 1a was developed as a reusable visible sensor for MeCN.

Vapochromic effect in switchable molecular-based spin crossover compounds

Coordination complexes based on transition metal ions displaying [Ar]3d⁴-3d⁷ electronic configurations can undergo the likely most spectacular switchable phenomena found in molecular coordination chemistry, the well-known Spin Crossover (SCO). SCO phenomena is a detectable, reproducible and reversible switch that occurs between the high spin (HS) and low spin (LS) electronic states of the transition metal actuated by different stimuli (i.e. light, temperature, pressure, the presence of an analyte). Moreover, the occurrence of SCO phenomena causes different outputs, one of them being a colour change. Altogether, an analyte in gas form could be detected by naked eye once it has triggered the corresponding HS ↔ LS transition. This vapochromic effect could be used to detect volatile molecules using a low-cost technology, including harmful chemical substances, gases and/or volatile organic compounds (VOCs) that are present in our environment, in our home or at our workplace. The present review condenses all reported iron coordination compounds where the colour change induced by a given molecule in its gas form is coupled to a HS ↔ LS spin transition. Special emphasis has been made on describing the nature of the post-synthetic modification (PSM) taking place in the material upon the analyte uptake. In this case, three types of PSM can be distinguished: based on supramolecular contacts and/or leading to a coordinative or covalent bond. In the latter, a colour change not only indicates the switch of the spin state in the material but also the formation of a new compound with different properties. It is important to indicate that some of the SCO coordination compounds discussed in the current report have been part of other spin crossover reviews, that have gathered thermally induced SCO compounds and the influence of guest molecules on the SCO behaviour. However, in the majority of examples in these reviews, the change of colour upon the uptake of analytes is not associated with a spin transition at room temperature. In addition, the observed colour variations have been mainly discussed in terms of host-guest interactions, when they can also be induced by a PSM taking place in different sites of the molecule, like the Fe(II) coordination sphere or by chemically altering its inorganic and/or organic linkers. Therefore, we present here for the first time an exhaustive compilation of all systems in which the interaction between the coordination compounds and the vapour analytes leads to a colour change due to a spin transition in the metal centre at room temperature.

High-contrast reversible multiple color-tunable solid luminescent ionic polymers for dynamic multilevel anti-counterfeiting

Dynamic color-tunable luminescent materials, which possess huge potential applications in advanced multilevel luminescence anti-counterfeiting, are of considerable interest. However, it remains challenging to develop simple high-contrast reversible multiple (triple or more than triple) color-tunable high-efficiency solid luminescent materials with low cost, facile synthesis, and good processability. Herein, by simply grafting charged multi-color AIEgen-based chromophores into polymers, a series of high-efficiency multiple color-tunable luminescent single ionic polymers are constructed through tuning feed ratios, counter anions and reaction solvents. Remarkably, some ionic polymers can not only achieve rare high-contrast reversible multiple color-tunable emission in solid states in response to different solvent stimuli, but also could realize excitation-dependent color-tunable emission. To the best of our knowledge, such charming multiple (triple or more than triple) color-tunable solid polymers responding to multiple external stimuli are still rare. Based on comparative studies of emission spectra, excitation spectra and fluorescence lifetimes before and after swelling, it could be inferred that solvent stimuli could induce microstructure changes of these ionic polymers and then change the aggregated-states of their corresponding AIE-active emission centers. Moreover, the different solvent stimuli could induce to produce different degrees of microstructure changes, resulting in their unique multiple color-tunable emission. More significantly, these smart color-tunable ionic polymers show great promise for applications in dynamic multilevel (three-level or even more than three-level) anti-counterfeiting.

Adsorption and membrane separation for removal and recovery of volatile organic compounds

Volatile organic compounds (VOCs) are a crucial kind of pollutants in the environment due to their obvious features of severe toxicity, high volatility, and poor degradability. It is particularly urgent to control the emission of VOCs due to the persistent increase of concentration and the stringent regulations. In China, clear directions and requirements for reduction of VOCs have been given in the "national plan on environmental improvement for the 13th Five-Year Plan period". Therefore, the development of efficient technologies for removal and recovery of VOCs is of great significance. Recovery technologies are favored by researchers due to their advantages in both recycling VOCs and reducing carbon emissions. Among them, adsorption and membrane separation processes have been extensively studied due to their remarkable industrial prospects. This overview was to provide an up-to-date progress of adsorption and membrane separation for removal and recovery of VOCs. Firstly, adsorption and membrane separation were found to be the research hotspots through bibliometric analysis. Then, a comprehensive understanding of their mechanisms, factors, and current application statuses was discussed. Finally, the challenges and perspectives in this emerging field were briefly highlighted.

Solvates of a dianisyl-substituted donor–acceptor-type benzothiadiazole: mechanochromic, vapochromic, and acid-responsive multicolor luminescence

Solvates of a donor–acceptor-type fluorophore exhibited multicolor luminescence that can respond to mechanical stimuli, solvent and acid vapors.

A dinoflagellate-inspired mechanochromic film for fast and reversible information encryption and display

Inspired by dinoflagellates, we developed a flexible film consisting of spiropyran-based soft polyacrylate and Zn(OTf)₂. The open-ring form of spiropyran coordinated with Zn(OTf)₂ under stretching to produce a visible fluorescent color change from colorless to yellow. The potential of this film was demonstrated for fast and reversible information encryption and decryption.

Synthesis of a Tetrahedral Metal-Organic Supramolecular Cage with Dendritic Carbazole Arms

In recent years, incredible endeavors have been devoted to the design and self-assembly of discrete metal-organic cages (MOCs) with expanding intricacy and functionality. The controlled synthesis of metal-organic supramolecular cages with large branched chains remains an interesting and challenging work in supramolecular chemistry. Herein, a tetrahedral metal-organic supramolecular cage (ZnII4L4) containing 12 dendritic carbazole arms is unprecedentedly constructed through coordination-driven subcomponent self-assembly and characterized in different ways. Interestingly, tetrahedral supramolecular Cage-1 exhibited the potential for aggregation-induced emission (AIE) performance and stimulus-responsive luminescence features, and it achieved color-tunable photoluminescence due to the introduction of dendritic carbazole arms. Crucially, owing to the great photophysical properties of Cage-1 in solution, Cage-1 was enabled to act as a fluorescent ink for the vapor-responsive recording and wiping of information.

Simultaneous Recognition and Separation of Organic Isomers Via Cooperative Control of Pore-Inside and Pore-Outside Interactions

Despite the desirability of organic isomer recognition and separation, current strategies are expensive and complicated. Here, a simple strategy for simultaneously recognizing and separating organic isomers using pillararene-based charge-transfer cocrystals through the cooperative control of pore-inside and pore-outside intermolecular interactions is presented. This strategy is illustrated using 1-bromobutane (1-BBU), which is often produced as an isomeric mixture with 2-bromobutane (2-BBU). According to its structure, perethylated pillar[5]arene (EtP5) and 3,5-dinitrobenzonitrile (DNB) are strategically chosen as a donor and an acceptor. As a result, their cocrystal exhibited stronger pore-inside interactions and much weaker pore-outside interactions with 1-BBU than with 2-BBU. Consequently, nearly 100% 1-BBU selectivity is achieved in two-component mixtures, even in those containing trace 1-BBU (1%), whereas free EtP5 only achieved 89.80% selectivity. The preference for linear bromoalkanes is retained in 1-bromopentane/3-bromopentane and 1-bromohexane/2-bromohexane mixtures, demonstrating the generality of this strategy. Selective adsorption of linear bromoalkanes induced a naked-eye-detectable color change from red to white. Moreover, the cocrystal are used over multiple cycles without losing selectivity.

Theoretical Study on the Vapochromic Ni(II)-Quinonoid Complex: One-Dimensional Stacking Structure-Based Color Switching

Vapochromic crystals of Ni(II)-quinonoid complexes were theoretically investigated using density functional theory (DFT) calculations. Kato et al. previously reported that the purple crystals of a four-coordinate Ni(II)-quinonoid complex (1P) exhibited vapochromic characteristics upon exposure to methanol gas, resulting in orange crystals of the six-coordinate methanol-bound complex (1O) [Angew. Chem., Int. Ed.2017, 56, 2345-2349]. However, the authors did not characterize the crystal structure of 1P. In the present study, we computationally predicted the crystal structure of 1P by performing a crystal structure search with classical force-field computations followed by optimization using DFT calculations. The simulated powder X-ray diffraction pattern of the DFT-optimized structure agreed with experimental observations, indicating that our predicted crystal structure is reliable. Investigation of the optimized crystal structure of 1P revealed that its color change arose from changes in its 1D-band structure, which consists of Ni 3d orbitals and quinonoid π-orbitals. Intermolecular interactions were weakened upon the binding of methanol to the Ni(II) center in 1O. Consequently, the intermolecular 3d-π interaction in 1P lowered the band gap and induced the red-shifting of the monomeric four-coordinate Ni(II)-quinonoid complex. Meanwhile, the obtained absorption spectrum of 1O closely corresponded to that of the monomeric six-coordinate Ni(II)-quinonoid complex. Our study provides a new strategy for accurately predicting molecular crystal structures and reveals a new insight into vapochromism based on band structure color switching.

Multistimuli-responsive materials based on a zinc(II) complex with high-contrast and multicolor switching

The development of stimulus-responsive luminescent materials, especially those based on a single compound exhibiting multicolor and high-contrast (Δλ_em ≥ 100 nm) chromic properties, is a critical challenge. In this work, we synthesized and characterized a zinc(II) complex (1). As expected, 1 displays aggregation-induced emission enhancement (AIEE) in THF/H₂O mixtures, and remarkable multicolor switching under external stimuli in the solid state. Complex 1 shows reversible mechanochromic luminescence behavior with a large wavelength shift (Δλ_em = 100 nm) during the grinding-fuming cycles, due to the phase transformation between the crystalline and amorphous states. More impressively, 1 exhibits obvious acidochromic properties (Δλ_em = 130 nm) which originate from the adsorption of vapor and a gas-solid reaction on the crystal surface. Furthermore, 1 exhibits electrochemical oxidation behavior accompanied by quenching of yellow-green emission due to the overlap of an emission band and an absorption band. The above-mentioned color changes under ambient light can also be observed by the naked eye during the mechanical, acid-base vapor and electrical stimulation. Based on the high-contrast and multicolor switching, complex 1 was successfully developed into test papers and films in the field of rapid detection of mechanical stimuli and HCl/NH₃ vapors.

Simultaneous Occurrence of Vapochromism and Vapoluminescence in Formaldehyde-Responsive Amino-Functionalized Copper(I) Polymorphic Coordination Polymers

The use of vapor-responsive chromic materials in sensing applications for the detection of harmful volatile organic chemicals is rapidly expanding. Herein, four new amino-functionalized Cu(I) coordination polymers of [CuI(pyt-NH₂)]_n (1) and (2) and [CuSCN(pyt-NH₂)]_n (3) and (4) (where pyt-NH₂ = 2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole) were successfully synthesized. Single-crystal X-ray diffraction analysis reveals that 1 and 2 are iodo-based polymorphs, while 3 and 4 are thiocyanato-based polymorphs. They possess densely diverse crystalline architectures decorated by uncoordinated amino groups as a binding site. Also, 1-4 show a variety of color and luminescence based on the structural diversity. Remarkably, 1 and 2 undergo the change of color and naked-eye solid-state luminescence in response to formaldehyde (FA) vapor, demonstrating simultaneous vapochromism and vapoluminescence. The chromic Cu(I) coordination polymers in this work present for the first time dual-mode vapochromism and vapoluminescence in a highly selective response to FA vapor. The responsive mechanism has been clarified by Fourier transform infrared spectroscopy (FT-IR), electrospray ionization mass spectrometry (ESI-MS), ¹H nuclear magnetic resonance (NMR), powder X-ray diffraction (PXRD), and luminescence lifetime measurements, which reveal carbinolamine formation via the specific reaction between FA and the active amino groups of coordinated pyt-NH₂. The carbinolamine formation can trigger the structural transformation of 1 and 2, leading to the concurrently selective vapochromism and vapoluminescence induced by FA vapor.

Stimuli-Responsive Electrochemical Energy Storage Devices

Electrochemical energy storage (EES) devices have been swiftly developed in recent years. Stimuli-responsive EES devices that respond to different external stimuli are considered the most advanced EES devices. The stimuli-responsive EES devices enhanced the performance and applications of the EES devices. The capability of the EES devices to respond to the various external stimuli due to produced advanced EES devices that distinguished the best performance and interactions in different situations. The stimuli-responsive EES devices have responsive behavior to different external stimuli including chemical compounds, electricity, photons, mechanical tensions, and temperature. All of these advanced responsiveness behaviors have originated from the functionality and specific structure of the EES devices. The multi-responsive EES devices have been recognized as the next generation of stimuli-responsive EES devices. There are two main steps in developing stimuli-responsive EES devices in the future. The first step is the combination of the economical, environmental, electrochemical, and multi-responsiveness priorities in an EES device. The second step is obtaining some advanced properties such as biocompatibility, flexibility, stretchability, transparency, and wearability in novel stimuli-responsive EES devices. Future studies on stimuli-responsive EES devices will be allocated to merging these significant two steps to improve the performance of the stimuli-responsive EES devices to challenge complicated situations.

Organic deliquescence: organic vapor-induced dissolution of molecular salts

This report demonstrates organic vapor-induced dissolution of several molecular salts (i.e., organic deliquescence), like water vapor-induced deliquescence. Systematic experiments indicate that appropriate organic deliquescent responses to volatile organic compounds can be designed according to the principle, “like dissolves like”. The phenomena will be useful for developing agents to collect various volatile organic compounds.

Several molecular salts exhibit organic deliquescence in response to organic vapors.

Spectroscopic Tracking of Salicylideneaniline Photocolored Crystals: An Attempt to Quantify Polymorph-Dependent Features toward Precise Structure-Function Correlation Analysis

Three polymorphs of salicylideneaniline (SA) were prepared, and their photochromic behavior was examined using a recently developed single-crystal microscopic UV-vis spectroscopy approach. This system enabled us to acquire absorption data during the bleaching process as a function of temperature and visible light intensity. First, we demonstrated that, in contrast to the generally accepted assumption, the bleaching curves were notably influenced by the degree of photosaturation at the initial stage. By modifying our kinetic model to include the term representing the initial degree of photosaturation, we successfully obtained the kinetic parameters intrinsic to each crystal structure. Second, we further analyzed the kinetic parameters to show that the bleaching process was accelerated by visible light irradiation to a significantly higher degree than by thermal relaxation. The two bleaching-prompting effects were quantitatively compared between two photochromic polymorphs, α₁ and α₂; the long life of the photoproduct in α₂ was attributed to efficient self-shielding from visible light irradiation enabled by its structural features. These results prompted us to reexamine the simple dualistic photochemical and thermal classification of photochromic systems and will provide a foundation for the precise structure-function analysis of crystalline materials, including SAs.

Color-Tunable Supramolecular Luminescent Materials

Constructing multicolor photoluminescent materials with tunable properties is an attractive research objective on account of their abundant applications in materials science and biomedical engineering. By comparison with covalent synthesis, supramolecular chemistry has provided a more competitive and promising strategy for the production of organic materials and the regulation of their photophysical properties. By taking advantage of dynamic and reversible noncovalent bonding interactions, supramolecular strategies can, not only simplify the design and fabrication of organic materials, but can also endow them with dynamic reversibility and stimuli responsiveness, making it much easier to adjust the superstructures and properties of the materials. Occasionally, it is possible to introduce emergent properties into these materials, which are absent in their precursor compounds, broadening their potential applications. In an attempt to highlight the state-of-the-art noncovalent strategies available for the construction of smart luminescent materials, an overview of color-tunable materials is presented in this Review, with the emphasis being placed on the examples drawn from host-guest complexes, supramolecular assemblies and crystalline materials. The noncovalent synthesis of room-temperature phosphorescent materials and the modulation of their luminescent properties are also described. Finally, future directions and scientific challenges in the emergent field of color-tunable supramolecular emissive materials are discussed.

Cyclodextrin-pillar[n]arene hybridized macrocyclic systems

Cyclodextrin (CD) and pillar[n]arene are significant macrocyclic host molecules in supramolecular chemistry, and have either similar or contrasting physicochemical properties, for example, both can provide capable cavities available for recognizing various favorite guest molecules, while they usually possess different solubility in aqueous solutions, and exhibit diverse chiral characteristics. To balance their similarity and differences inherited from each chemical structure and incorporate both advantages, the CD-pillar[n]arene hybrid macrocyclic system was recently developed. In this review, we will focus on the preparation and application of CD-pillar[n]arene hybrid macrocyclic systems. Both noncovalent interactions and covalent bonds were employed in the synthesis strategies of building the hybrid macrocyclic system, which was in the form of host-guest inclusion, self-assembly, conjugated molecules, and polymeric structures. Furthermore, the CD-pillar[n]arene hybrid macrocyclic system has been primarily applied for the removal of organic pollutants from water, induced chirality, as well as photocatalysis due to the integration of both cavities from CD and pillar[n]arene as hybrid hosts and chiral characteristics inherited from their chemical structures.

Proton-electron-coupled functionalities of conductivity, magnetism, and optical properties in molecular crystals

Proton-electron-coupled reactions, specifically proton-coupled electron transfer (PCET), in biological and chemical processes have been extensively investigated for use in a wide variety of applications, including energy conversion and storage. However, the exploration of the functionalities of the conductivity, magnetism, and dielectrics by proton-electron coupling in molecular materials is challenging. Dynamic and static proton-electron-coupled functionalities are to be expected. This feature article highlights the recent progress in the development of functionalities of dynamic proton-electron coupling in molecular materials. Herein, single-unit conductivity by self-doping, quantum spin liquid state coupled with quantum fluctuation of protons, switching of conductivity and magnetism triggered by the disorder-order transition of deuterons, and their external responses under pressure and in the presence of an electric field are introduced. In addition, as for the functionalities of proton-d/π-electron coupling in metal dithiolene complexes, magnetic switching with multiple PCET and vapochromism induced by electron transfer through hydrogen-bond (H-bond) formation is introduced experimentally and theoretically. We also outlined the basic and applied issues and potential challenges for development of proton-electron-coupled molecular materials, functionalities, and devices.

Multistimuli-Responsive Squaraine Dyad Exhibiting Concentration-Controlled Vapochromic Luminescence

Stimuli-responsive organic materials with controllable luminescence are of enormous importance because of their potential applications in sensing, data security, and display devices. In this study, a multistimuli-responsive squaraine dyad (SQ-d) composed of two rigid squaraine moieties and a flexible ethylene linker was rationally designed and synthesized. SQ-d exhibits polymorphic luminescence, which can be reversibly switched by various external stimuli, including solvent vapor exposure, heat, and shear force. Unexpectedly, the weakly luminescent phase (O1) of SQ-d exhibits concentration-controlled vapochromic behavior. Film O1 can convert to a highly green-emissive phase (G1) under a low concentration of CHCl₃ vapor and convert to a highly yellow-emissive phase (Y) under a high concentration of CHCl₃ vapor; these originate from two distinct crystallization-induced emission enhancement processes. To the best of our knowledge, this is the first investigation of the effect of vapor concentration on the phase transitions of organic vapochromic luminophores. By analyzing the single-crystal structures and photophysical properties of SQ-d, we concluded that the green and yellow emissions probably originated from a zigzag stacking mode and an H-type π-π stacking mode, respectively. Finally, two prototypes based on SQ-d for applications in information encryption and vapor sensing were successfully demonstrated.

Near-infrared vapochromism in lipid-packaged mixed-valence coordination polymers

Reversible vapochromism in the NIR region is achieved for a mixed-valence platinum complex with lipid counterions, from which exclusion of crystallization water by organic vapor alters the lipid molecular orientation, which amplifies the information to changes in the 1D coordination structure and the electronic state.

Reversible on/off conformational switching of pentafluorobenzoyl amide triggered by acid vapor and sublimation

Molecular switches composed of pentafluorobenzoyl amide can be controlled with an acid and sublimation in an on/off manner in the solid state.

CPL on/off control of an assembled system by water soluble macrocyclic chiral sources with planar chirality

Herein, we report the synthesis and planar chiral properties of a pair of water-soluble cationic pillar[5]arenes with stereogenic carbons. Interestingly, although units of the molecules were rotatable, only one planar chiral diastereomer existed in water in both cases. As a new type of chiral source, these molecules transmitted chiral information from the planar chiral cavities to the assembly of a water-soluble extended π-conjugated compound, affording circularly polarized luminescence (CPL). The chirality transfer process and resulting CPL were extremely sensitive to the feed ratio of the chiral pillar[5]arenes owing to the combined action of their planar chirality, bulkiness, and strong binding properties. When a limited amount of chiral source was added, further assembly of the extended π-conjugated compound into helical fibers with CPL was triggered. Unexpectedly, larger amounts of chiral source destroyed the helical fiber assemblies, resulting in elimination of the chirality and CPL properties from the assembled structures.

Readily obtained pillar[5]arenes with pure planar chirality enabled CPL on/off control of an assembled system by varying the feed ratio.

Pyridine Nitrogen Position Controlled Molecular Packing and Stimuli-responsive Solid-State Fluorescence Switching: Supramolecular Complexation Facilitated Turn-on Fluorescence

Fluorophore structure and supramolecular interactions plays important role on the molecular conformation and packing in the solid state that strongly influenced on the solid-state fluorescence properties. Herein, we report the...

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence

Tailored metal–organic tetrahedral nanocages with aggregation-induced emission for an anti-counterfeiting ink and stimulus-responsive luminescence.

Acetonitrile-induced structure fine-tuning of a trinuclear zinc complex showing multistimuli responsive luminescence

A trinuclear zinc complex (1) exhibits mechanochromic and acidochromic luminescence properties with five-color switching. The structure of complex 2 shows that the acetonitrile molecules induce fine-tuning of the structures compared with 1.