Onium Photocages for Visible-Light-Activated Poly(thiourethane) Synthesis and 3D Printing

The lack of chemical diversity in light-driven reactions for 3D printing poses challenges in the production of structures with long-term ambient stability, recyclability, and breadth in properties (mechanical, optical, etc.). Herein we expand the scope of photochemistries compatible with 3D printing by introducing onium photocages for the rapid formation of poly(thiourethanes) (PTUs). Efficient nonsensitized visible-light photolysis releases organophosphine and -amine derivatives that catalyze thiol-isocyanate polyaddition reactions with excellent temporal control. Two resin formulations comprising commercial isocyanates and thiols were developed for digital light processing (DLP) 3D printing to showcase the fast production of high-resolution PTU objects with disparate mechanical properties. Onium photocages represent valuable tools to advance light-driven manufacturing of next-generation high-performance sustainable materials.

Photopolymerization Approach to Advanced Polymer Composites: Integration of Surface-Modified Nanofillers for Enhanced Properties

The incorporation of functionalized nanofillers into polymers via photopolymerization approach has gained significant attention in recent years due to the unique properties of the resulting composite materials. Surface modification of nanofillers plays a crucial role in their compatibility and polymerization behavior within the polymer matrix during photopolymerization. This review focuses on the recent developments in surface modification of various nanofillers, enabling their integration into polymer systems through photopolymerization. The review discusses the key aspects of surface modification of nanofillers, including the selection of suitable surface modifiers, such as photoinitiators and polymerizable groups, as well as the optimization of modification conditions to achieve desired surface properties. The influence of surface modification on the interfacial interactions between nanofillers and the polymer matrix is also explored, as it directly impacts the final properties of the nanocomposites. Furthermore, the review highlights the applications of nanocomposites prepared by photopolymerization, such as sensors, gas separation membranes, purification systems, optical devices, and biomedical materials. By providing a comprehensive overview of the surface modification strategies and their impact on the photopolymerization process and the resulting nanocomposite properties, this review aims to inspire new research directions and innovative ideas in the development of high-performance polymer nanocomposites for diverse applications.

Synthesizing cationic polymers and tuning their properties for microalgae harvesting

This study reports a facile technique to synthesize and tune the cationic polymer, poly(3-acrylamidopropyl)trimethylammonium chloride (PAPTAC), in terms of molecular weight and surface change for harvesting three microalgae species (Scenedesmus sp., P.purpureum, and C. vulgaris). The PAPTAC polymer was synthesised by UV-induced free-radical polymerisation. Polymer tuning was demonstrated by regulating the monomer concentration (60 to 360 mg/mL) and UV power (36 and 60 W) for polymerisation. The obtained PAPTAC polymer was evaluated for harvesting three different microalgae species and compared to a commercially available polymer. The highest flocculation efficiency for Scenedesmus sp. and P. purpureum was observed at a dosage of 25 mg-polymer/g of dry biomass by using PAPTAC-90, resulting in higher flocculation efficiency than the commercial polymer. Results in this study show evidence of effective neutralisation of the negative charge surface of microalgae cells by the produced cationic PAPTAC polymer and polymer bridging for effective flocculation. The obtained PAPTAC polymer was less effective for harvesting C. vulgaris, possibly due to other factors such as cell morphology and composition of extracellular polymeric substances of at the cell membrane that may also influence harvesting performance.

Asymmetric Ion-Pairing Photoredox Catalysis for Stereoselective Cationic Polymerization under Light Control

By virtue of noninvasive regulations by light, photocontrolled polymerizations have attracted considerable attention for the precision synthesis of macromolecules. However, a cationic polymerization with simultaneous photocontrol and tacticity-regulation remains elusive so far. Herein, we introduce an asymmetric ion-pairing photoredox catalysis strategy that allows for the development of a stereoselective cationic polymerization with concurrent light regulation for the first time. By employing an ion pair catalyst (PC+/*A-) consisting of a photoredox active cation (PC+) and a sterically confined chiral anion (*A-) to deliver the stereochemical control, the cationic polymerization of vinyl ethers can be achieved with photocontrol and high isotactic selectivity (up to 91% m) at a remarkable low catalyst loading (50 ppm).

Visible-Light Initiated Dispersion Photopolymerization of Styrene

Polystyrene (PS) particles were synthesized in ethanol/water mixture by dispersion polymerization using visible light irradiation, with either a N-heterocyclic carbene borane-based photoinitiating system (PIS) or a disulfide. With the full PIS and poly(ethylene glycol) methyl ether methacrylate (PEGMA) as stabilizer, the size distributions were broad and the amount of PEGMA had a strong impact on the experiment reproducibility. The addition of a base solved the problem, leading to faster polymerizations, narrower size distributions and larger particles. With the disulfide as sole PIS, bigger and narrowly distributed PS particles were again formed. Quantitative conversion was achieved in each system, with particle size ranging between 100 and 350 nm. The use of poly(N-vinylpyrrolidone) as stabilizer led to significantly larger particles, up to 1.2 μm, with narrow size distributions. The production of such large latex particles by photoinitiated polymerizations is unprecedented.

Plant-based Biomass/Polyvinyl Alcohol Gels for Flexible Sensors

Flexible sensors show great application potential in wearable electronics, human-computer interaction, medical health, bionic electronic skin and other fields. Compared with rigid sensors, hydrogel-based devices are more flexible and biocompatible and can easily fit the skin or be implanted into the body, making them more advantageous in the field of flexible electronics. In all designs, polyvinyl alcohol (PVA) series hydrogels exhibit high mechanical strength, excellent sensitivity and fatigue resistance, which make them promising candidates for flexible electronic sensing devices. This paper has reviewed the latest progress of PVA/plant-based biomass hydrogels in the construction of flexible sensor applications. We first briefly introduced representative plant biomass materials, including sodium alginate, phytic acid, starch, cellulose and lignin, and summarized their unique physical and chemical properties. After that, the design principles and performance indicators of hydrogel sensors are highlighted, and representative examples of PVA/plant-based biomass hydrogel applications in wearable electronics are illustrated. Finally, the future research is briefly prospected. We hope it can promote the research of novel green flexible sensors based on PVA/biomass hydrogel.

Photochemical Processes of Superbase Generation in Xanthone Carboxylic Salts

Photobase generators are species that allow the photocatalysis of various reactions, such as thiol-Michael, thiol-isocyanate, and ring-opening polymerization reactions. However, existing compounds have complex syntheses and low quantum yields. To overcome these problems, photobase generators based on the photodecarboxylation reaction were developed. We synthesized and studied the photochemistry and photophysics of two xanthone photobase, their carboxylic acid precursors, and their photoproducts to understand the photobase generation mechanism. We determined accurate quantum yields of triplet states and photobase generation. The effect of the intermediate radical preceding the base release was demonstrated. We characterized the photophysics of the photobase by femtosecond spectroscopy and showed that the photodecarboxylation process occurred from the second excited triplet state with a rate constant of 2.2×10⁹  s^-1 .

Linear Cyclobutane-Containing Polymer Synthesis via [2 + 2] Photopolymerization in an Unconfined Environment under Visible Light

The [2 + 2] photopolymerization of diolefinic monomers is an appealing approach for the construction of polymeric materials. Herein, we demonstrate that the establishment of an effective donor-acceptor conjugation by introducing electron-donating alkoxy groups at appropriate positions of the benzene ring could activate p-phenylenediacrylate (PDA), thus enabling the development of the first solution [2 + 2] photopolymerization of such monomers under the irradiation of visible light. Variation on the alkoxy groups and the ester parts could allow access to a series of linear cyclobutane-containing polymer products with high molecular weight (up to 140 kDa) and good solubility in common solvents. Further, temporal control and postpolymerization modification with preinstalled pendant C═C bonds via thiol-ene click reaction are also demonstrated with this [2 + 2] photopolymerization system.

Spotting Trends in Organocatalyzed and Other Organomediated (De)polymerizations and Polymer Functionalizations

Organocatalysis has evolved into an effective complement to metal‐ or enzyme‐based catalysis in polymerization, polymer functionalization, and depolymerization. The ease of removal and greater sustainability of organocatalysts relative to transition‐metal‐based ones has spurred development in specialty applications, e.g., medical devices, drug delivery, optoelectronics. Despite this, the use of organocatalysis and other organomediated reactions in polymer chemistry is still rapidly developing, and we envisage their rapidly growing application in nascent areas such as controlled radical polymerization, additive manufacturing, and chemical recycling in the coming years. In this Review, we describe ten trending areas where we anticipate paradigm shifts resulting from novel organocatalysts and other transition‐metal‐free conditions. We highlight opportunities and challenges and detail how new discoveries could lead to previously inaccessible functional materials and a potentially circular plastics economy.

Microspheres from light-a sustainable materials platform

Driven by the demand for highly specialized polymeric materials via milder, safer, and sustainable processes, we herein introduce a powerful, purely light driven platform for microsphere synthesis – including facile synthesis by sunlight. Our light-induced step-growth precipitation polymerization produces monodisperse particles (0.4–2.4 μm) at ambient temperature without any initiator, surfactant, additive or heating, constituting an unconventional approach compared to the classically thermally driven synthesis of particles. The microspheres are formed via the Diels-Alder cycloaddition of a photoactive monomer (2-methylisophthaldialdehyde, MIA) and a suitable electron deficient dienophile (bismaleimide). The particles are stable in the dry state as well as in solution and their surface can be further functionalized to produce fluorescent particles or alter their hydrophilicity. The simplicity and versatility of our approach introduces a fresh opportunity for particle synthesis, opening access to a yet unknown material class.

Photopolymerization provides a safe and mild fabrication pathway towards polymeric particles but the implementation of photochemistry from solution to dispersed media to produce particles is far from trivial. Here, the authors demonstrate an additive-free step-growth photopolymerization with sunlight, exploiting the photoinduced Diels-Alder to fabricate micrometer sized polymeric particles.

Monophosphoniums as Effective Photoredox Organocatalysts for Visible Light-Regulated Cationic RAFT Polymerization

Visible light-regulated metal-free polymerizations have attracted considerable attention for macromolecular syntheses in recent years. However, few organic photocatalysts show high efficiency and strict photocontrol in cationic polymerizations. Herein, we introduce monophosphonium-doped polycyclic arenes as an organic photocatalyst, which features the high tunability, broad redox window, long excited state lifetime, and excellent temporal control in the cationic reversible addition-fragmentation chain transfer polymerization of vinyl ethers. A correlation of the catalytic performance and the photophysical and electrochemical properties of photocatalysts is also discussed.

Visible‐Light‐Initiated Palladium‐Catalyzed Cross‐coupling by PPh 3 Uncaging from an Azobenzene Ruthenium–Arene Complex

Photo‐release of triphenylphosphine from a sulfonamide azobenzene ruthenium–arene complex was exploited to activate Pd^IICl₂ into Pd⁰ catalyst, for the photo‐initiation of Sonogashira cross‐coupling. The transformation was initiated on demand – by using simple white LED strip lights – with a high temporal response and the ability to control reaction rate by changing the irradiation time. Various substrates were successfully applied to this photo‐initiated cross‐coupling, thus illustrating the wide functional‐group tolerance of our photo‐caged catalyst activator, without any need for sophisticated photochemistry apparatus.

Two-in-One: Photothermal Ring-Opening Copolymerization of CO2 and Epoxides

A two-in-one strategy for the photothermal ring-opening copolymerization (PROCOP) of carbon dioxide (CO₂) and epoxides was developed by using visible light as an external stimulus. This strategy bridges two processes involving light-to-heat conversion and the alternating copolymerization of CO₂ and epoxides. As a proof-of-concept, aluminum porphyrin complexes were explored as photothermal catalysts to afford the copolymerization of CO₂/epoxides under a 635 nm laser irradiation. We demonstrated photothermally enhanced polymerization activity, in which the polymerization initiated by the photothermal effect showed a much higher turnover frequency than in the thermal system. Moreover, the PROCOP demonstrated a spatial-temporal control by a light on/off switch. This study provides a fascinating photothermal strategy not only for the CO₂/epoxides copolymerization but also for the ring-opening (co)polymerization of other cyclic monomers.

Photoactive Fe Catalyst for Light-Triggered Alkyd Paint Curing

Herein, we show that the photoactive complexes [(Cp)Fe(arene)]⁺ (Cp = cyclopentadienyl; arene = C₆H₆, C₆H₅Me) act as latent catalysts that allow for photochemical control over the onset of alkyd paint curing, without the need for antiskinning agents such as the volatile 2-butanone oxime normally used to prevent curing during paint storage. The highly soluble neutral complexes [(Cp)Fe(Ch)] and [(Cp)Fe(Ch')] (Ch = cyclohexadienyl, Ch' = methylcyclohexadienyl) readily convert to the photoactive complexes [(Cp)Fe(arene)]⁺ upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by well-known, industrially applied cobalt- and manganese-based catalyst Co(neodecanoate)₂ and [(Me₃TACN)₂Mn₂(μ-OOCR)₃](OOCR). The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]⁺ system performs equally well as these cobalt- and manganese-based catalysts in terms of drying time and outperform the manganese catalyst by showing a hardness development (increase) similar to that of the cobalt-based catalyst. Based on electron paramagnetic resonance and light-activity studies, we propose that photolysis of [(Cp)Fe(arene)]⁺ generates short-lived active Fe^II species, explaining the desired latency. The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)]⁺ alkyd curing systems presented herein are unique examples of intrinsically latent paint curing catalysts that (1) are based on an abundant and harmless transition metal (Fe), (2) do not require any antiskinning agents, and (3) show favorable performance in terms of drying times and hardness development.

Photochemical modifications for DNA/RNA oligonucleotides

Light-triggered chemical reactions can provide excellent tools to investigate the fundamental mechanisms important in biology. Light is easily applicable and orthogonal to most cellular events, and its dose and locality can be controlled in tissues and cells. Light-induced conversion of photochemical groups installed on small molecules, proteins, and oligonucleotides can alter their functional states and thus the ensuing biological events. Recently, photochemical control of DNA/RNA structure and function has garnered attention thanks to the rapidly expanding photochemistry used in diverse biological applications. Photoconvertible groups can be incorporated in the backbone, ribose, and nucleobase of an oligonucleotide to undergo various irreversible and reversible light-induced reactions such as cleavage, crosslinking, isomerization, and intramolecular cyclization reactions. In this review, we gather a list of photoconvertible groups used in oligonucleotides and summarize their reaction characteristics, impacts on DNA/RNA thermal stability and structure, as well as their biological applications.

Catalyst-Free, Visible-Light-Induced Step-Growth Polymerization by a Photo-RAFT Single-Unit Monomer Insertion Reaction

Photoinduced polymerization is an attractive technique with the advantages of easy operation, mild conditions, and excellent temporospatial controllability. However, the application of this technique in step-growth polymerization is highly challenging. Here, we present a catalyst-free, visible-light-induced step-growth polymerization method utilizing a photo-RAFT single-unit monomer insertion reaction between the xanthate and vinyl ether groups. Benefitting from this reaction, a pendant cationic RAFT agent can be generated in each repeating unit of the polymer backbone. Both cationic and radical side chain extensions were successfully realized, providing a facile approach for the postpolymerization of step-growth polymers for the development of various functional polymeric materials.

Studying the Influence of Mica Particle Size on the Properties of Epoxy Acrylate/Mica Composite Coatings through Reducing Mica Particle Size by the Ball-Milled Method

In this work, a series of epoxy acrylate (EA)/mica composite coatings were synthesized through introducing mica powders of different particle size into epoxy acrylate coatings and using an ultraviolet (UV) curing technique to investigate the influence of mica particle size on the coatings. Mica powders of different particle sizes were obtained by ball-milling for 4, 8, 12, 16, and 20 h with a planetary high-energy ball mill. The particle size and morphologies of ball-milled mica powders were characterized by laser particle size analyzer and scanning electron microscopy (SEM). The results indicated that planetary ball-milling reduced the particle size of mica powders effectively. Mica powders that were un-ball-milled and ball-milled were added into the epoxy acrylate matrix by a blending method to synthesize the organic-inorganic UV curable coatings. The optical photographs of the coatings showed greater stability of liquid mixtures with smaller particle size fillers. The chemical structures of EA/mica composite coatings were investigated by Fourier transform infrared spectroscopy (FTIR), and the conversion rate of C=C bonds was calculated. The results indicated that the C=C conversion of coatings with mica powders of smaller particle sizes was higher. Tests of mechanical properties and tests using electrochemical impedance spectroscopy (EIS) showed that pencil hardness, impact resistance, and coating resistance were improved due to the reduction of mica powders particle size.

Degradable Vinyl Random Copolymers via Photocontrolled Radical Ring-Opening Cascade Copolymerization

Degradable vinyl polymers by radical ring-opening polymerization are promising solutions to the challenges caused by non-degradable vinyl plastics. However, achieving even distributions of labile functional groups in the backbone of degradable vinyl polymers remains challenging. Herein, we report a photocatalytic approach to degradable vinyl random copolymers via radical ring-opening cascade copolymerization (rROCCP). The rROCCP of macrocyclic allylic sulfones and acrylates or acrylamides mediated by visible light at ambient temperature achieved near-unity comonomer reactivity ratios over the entire range of the feed compositions. Experimental and computational evidence revealed an unusual reversible inhibition of chain propagation by in situ generated sulfur dioxide (SO2), which was successfully overcome by reducing the solubility of SO2. This study provides a powerful approach to degradable vinyl random copolymers with comparable material properties to non-degradable vinyl polymers.

Photoinduced Free Radical Promoted Cationic RAFT Polymerization toward "Living" 3D Printing

Three-dimensional (3D) printing utilizing controlled polymerization systems is emerging as a powerful approach to fabricate "living" objects, which can be further modified with various functionalities. Here, we report photoinduced free radical-promoted cationic reversible addition-fragmentation chain transfer (RAFT) polymerization under broad wavelengths from ultraviolet (UV) to near-infrared (NIR) light. A commercially available iron catalyst, cyclopentadienyl iron dicarbonyl dimer (Fe₂(Cp)₂(CO)₄), was used as the photocatalyst, and several diphenyliodonium salts were examined as oxidants. Various poly(vinyl ether)s with controlled molecular weights and a narrow dispersity (1.06-1.32) were prepared through this method. Relatively high chain-end fidelity can be observed and has been demonstrated by successful chain-extension experiments. In addition, benefiting from the penetrating ability of NIR light, 3D objects with different thicknesses were achieved by employing stereolithography-based 3D printing techniques. Furthermore, the postfunctionalization of these 3D printed objects with fluorescent monomers provides a facile method to build 3D objects with complex functionality and potential applications in anticounterfeiting materials.

A Self-Catalyzed Visible Light Driven Thiol Ligation

We introduce a highly efficient ligation system based on a visible light-induced rearrangement affording a thiophenol which rapidly undergoes thiol-Michael additions. Unlike conventional light-triggered thiol-ene/yne systems, which rely on the use of photocaged bases/nucleophiles, (organo)-photo catalysts, or radical photoinitiators, our system provides a light-induced reaction in the absence of any additives. The ligation is self-catalyzed via the pyridine mediated deprotonation of the photochemically generated thiophenol. Subsequently, the thiol-Michael reaction between the thiophenol anion and electron deficient alkynes/alkenes proceeds additive-free. Hereby, the underlying photoinduced rearrangement of o-thiopyrinidylbenzaldehyde (oTPyB) generating the free thiol is described for the first time. We studied the influence of various reactions conditions as well as solvents and substrates. We exemplify our findings in a polymer end group modification and obtained macromolecules with excellent end group fidelity.

Stimuli responsive dynamic transformations in supramolecular gels

Supramolecular gels are formed by the self-assembly of small molecules under the influence of various non-covalent interactions. As the interactions are individually weak and reversible, it is possible to perturb the gels easily, which in turn enables fine tuning of their properties. Synthetic supramolecular gels are kinetically trapped and usually do not show time variable changes in material properties after formation. However, such materials potentially become switchable when exposed to external stimuli like temperature, pH, light, enzyme, redox, and chemical analytes resulting in reconfiguration of gel matrix into a different type of network. Such transformations allow gel-to-gel transitions while the changes in the molecular aggregation result in alteration of physical and chemical properties of the gel with time. Here, we discuss various methods that have been used to achieve gel-to-gel transitions by modifying a pre-formed gel material through external perturbation. We also describe methods that allow time-dependent autonomous switching of gels into different networks enabling synthesis of next generation functional materials. Dynamic modification of gels allows construction of an array of supramolecular gels with various properties from a single material which eventually extend the limit of applications of the gels. In some cases, gel-to-gel transitions lead to materials that cannot be accessed directly. Finally, we point out the necessity and possibility of further exploration of the field.

Novel imino- and aryl-sulfonate based photoacid generators for the cationic ring-opening polymerization of ε-caprolactone

The use of photoacid generators for the ring opening polymerization of cyclic esters is investigated.

Photochemical methods in metathesis reactions

Metathesis reactions are one of the most reliable and prevalent ways of creating a C-C bond in synthesis. Photochemical variants exist, and they have proven extremely useful for the construction of complex molecules, from natural products to Möbius rings. A variety of starting materials can undergo photometathesis reactions, including alkenes, alkynes, carbonyls, thiocarbonyls, and ketenes. While many of these reactions proceed with UV light and require harsh conditions, a handful of new techniques for visible-light photometathesis reactions have appeared recently. Given the current developments in visible-light photocatalysis, we believe that many more visible light photometathesis reactions await discovery. In this first review on the subject of photometathesis, we have gathered the relevant literature to give the reader an in-depth understanding of the field, and to inspire further development and synthetic application of these fascinating reactions.

Light-Activated Olefin Metathesis: Catalyst Development, Synthesis, and Applications

The most important means for tuning and improving a catalyst's properties is the delicate exchange of the ligand shell around the central metal atom. Perhaps for no other organometallic-catalyzed reaction is this statement more valid than for ruthenium-based olefin metathesis. Indeed, even the simple exchange of an oxygen atom for a sulfur atom in a chelated ruthenium benzylidene about a decade ago resulted in the development of extremely stable, photoactive catalysts. This Account presents our perspective on the development of dormant olefin metathesis catalysts that can be activated by external stimuli and, more specifically, the use of light as an attractive inducing agent.The insight gained from a deeper understanding of the properties of cis-dichlororuthenium benzylidenes opened the doorway for the systematic development of new and efficient light-activated olefin metathesis catalysts and catalytic chromatic-orthogonal synthetic schemes. Following this, ways to disrupt the ligand-to-metal bond to accelerate the isomerization process that produced the active precatalyst were actively pursued. Thus, we summarize herein the original thermal activation experiments and how they brought about the discoveries of photoactivation in the sulfur-chelated benzylidene family of catalysts. The specific wavelengths of light that were used to dissociate the sulfur-ruthenium bond allowed us to develop noncommutative catalytic chromatic-orthogonal processes and to combine other photochemical reactions with photoinduced olefin metathesis, including using external light-absorbing molecules as "sunscreens" to achieve novel selectivities. Alteration of the ligand sphere, including modifications of the N-heterocyclic carbene (NHC) ligand and the introduction of cyclic alkyl amino carbene (CAAC) ligands, produced more efficient light-induced activity and special chemical selectivity. The use of electron-rich sulfoxides and, more prominently, phosphites as the agents that induce latency widened the spectrum of light-induced olefin metathesis reactions even further by expanding the colors of light that may now be used to activate the catalysts, which can be used in applications such as stereolithography and 3D printing of tough metathesis-derived polymers.

Photoswitchable catalysis using organometallic complexes

Photoswitchable catalysis using organometallic complexes: a ligand design perspective.

Visible-light reversible photopolymerisation: insights via online photoflow – electrospray ionisation – mass spectrometry

Herein, we introduce a scalable photopolyaddition polymerisations using the pyrene-chalcone [2+2]-cycloaddition and monitor the photodepolymerisation process via an online photoflow – electrospray ionisation mass spectrometry setup.