Highly stable Tb(III) metal-organic framework derived from a new benzothiadiazole functionalized ligand for fluorescence recognition of ascorbic acid

Because ascorbic acid (AA) is one of the basic elements to maintain the normal physiological functions of human body, it is urgent to develop a material that can achieve efficient, rapid and in-situ detection for AA. A new fluorescence organic compound 4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-4-carboxylic acid) (H2BTBC) based on benzothiadiazole group has been synthesized, which can detect Fe3+ ions by fluorescence turn-off effect with a detection limit of 0.015 μM, as well as recognize linear amines by fluorescence turn-on effect. Moreover, a highly stable Tb(III) metal-organic framework has been solvothermally prepared with H2BTBC, namely {[(CH3)2NH2]2[Tb2(BTBC)4]∙solvents}n (JXUST-39), which can selectively detect AA among biological fluids by fluorescence enhancement effect with a detection limit of 0.077 μM. In addition, the mechanism for JXUST-39 detecting AA is possibly the cooperative effect of absorbance-caused enhancement and charge transfer between JXUST-39 and AA. Moreover, LED lamp beads, fluorescent films and fluorescent detection test paper based on JXUST-39 were prepared to achieve portable detection via fluorescence enhancement effect.

Bimetallic CPM-37(Ni,Fe) metal-organic framework: enhanced porosity, stability and tunable composition

A newly synthesized series of bimetallic CPM-37(Ni,Fe) metal-organic frameworks with different iron content (Ni/Fe ≈ 2, 1, 0.5, named CPM-37(Ni2Fe), CPM-37(NiFe) and CPM-37(NiFe2)) demonstrated high N2-based specific SBET surface areas of 2039, 1955, and 2378 m2 g-1 for CPM-37(Ni2Fe), CPM-37(NiFe), and CPM-37(NiFe2), having much higher values compared to the monometallic CPM-37(Ni) and CPM-37(Fe) with 87 and 368 m2 g-1 only. It is rationalized that the mixed-metal nature of the materials increases the structural robustness due to the better charge balance at the coordination bonded cluster, which opens interesting application-oriented possibilities for mixed-metal CPM-37 and other less-stable MOFs. In this work, the CPM-37-derived α,β-Ni(OH)2, γ-NiO(OH), and, plausibly, γ-FeO(OH) phases obtained via decomposition in the alkaline medium demonstrated a potent electrocatalytic activity in the oxygen evolution reaction (OER). The ratio Ni : Fe ≈ 2 from CPM-37(Ni2Fe) showed the best OER activity with a small overpotential of 290 mV at 50 mA cm-2, low Tafel slope of 39 mV dec-1, and more stable OER performance compared to RuO2 after 20 h chronopotentiometry at 50 mA cm-2.

Tuning the Cerium-Based Metal-Organic Framework Formation by Template Effect and Precursor Selection

The novel metal-organic framework [(CH3)2NH2]2[Ce2(bdc)4(DMF)2]·2H2O (Ce-MOF, H2bdc-terephthalic acid, DMF-N,N-dimethylformamide) was synthesized by a simple solvothermal method. Ce-MOF has 3D connectivity of bcu type with a dinuclear fragment connected with eight neighbors, while three types of guest species are residing in its pores: water, DMF, and dimethylammonium cations. Dimethylamine was demonstrated to have a decisive templating effect on the formation of Ce-MOF, as its deliberate addition to the solvothermal reaction allows the reproducible synthesis of the new framework. Otherwise, the previously reported MOF Ce5(bdc)7.5(DMF)4 (Ce5) or its composite with nano-CeO2 (CeO2@Ce5) was obtained. Various Ce carboxylate precursors and synthetic conditions were explored to evidence the major stability of Ce-MOF and Ce5 within the Ce carboxylate-H2bdc-DMF system. The choice of precursor impacts the surface area of Ce-MOF and thus its reactivity in an oxidative atmosphere. The in situ PXRD and TG-DTA-MS study of Ce-MOF in a nonoxidative atmosphere demonstrates that it eliminates H2O and DMF along with (CH3)2NH guest species in two distinct stages at 70 and 250 °C, respectively, yielding [Ce2(bdc)3(H2bdc)]. The H2bdc molecule is removed at 350 °C with the formation of novel modification of Ce2(bdc)3, which is stable at least up to 450 °C. According to the total X-ray scattering study with pair distribution function analysis, the most pronounced local structure transformation occurs upon departure of DMF and (CH3)2NH guest species, which is in line with the in situ PXRD experiment. In an oxidative atmosphere, Ce-MOF undergoes combustion to CeO2 at a temperature as low as 390 °C. MOF-derived CeO2 from Ce-MOF, Ce5, and CeO2@Ce5 exhibits catalytic activity in the CO oxidation reaction.

Fluorescence Thermometers Involving Two Ranges of Temperature: Coordination Polymer and DMSP Embedding

The measurement of temperature is indispensable in the fields of life, science, and industry. Fluorescence thermometers are attractive to researchers because of their advantages such as noncontact, high sensitivity, fast response, and excellent anti-interference. Here, a new coordination polymer (HNU-76) was synthesized by assembling Zn2+ with the H3TCA ligand, a fluorescent molecule with an AIE behavior, which can be used as a fluorescence thermometer. At 100-210 K, the fluorescence intensity ratio of HNU-76 versus temperature conforms to an Arrhenius-type decay relationship (R2 = 0.997), which can be the candidate for low-temperature sensing. In order to increase the sensing range, 4-[4-(dimethylamino)styryl] pyndine (DMSP) was successfully embedded on HNU-76, obtaining HNU-76⊃DMSP. The fluorescence intensity of HNU-76⊃DMSP conforms to an Arrhenius-type decay relationship (R2 = 0.997) at 270-360 K versus temperature. HNU-76 can be used for fluorescence detection at low temperatures, due to the DMSP loading, and HNU-76⊃DMSP can serve as the temperature thermometer in a range of temperatures common. Both materials show good cyclability and have the potential to be used in fluorescence thermometers.

3D ZnII-Based coordination polymer: Synthesis, structure and fluorescent sensing property for nitroaromatic compounds

A water-stable Zn^II-based coordination polymer (CP) with excellent photophysical behavior, namely [Zn₂L(atez)(H₂O)₂] (compound 1; H₃L = 4-(2',3'-dicarboxylphenoxy); atez = 5-aminotetrazole), was successfully prepared by the solvothermal reaction of Zn ions with a π-conjugated and semi-rigid multicarboxylate ligand H₃L in the presence of N-containing linker atez. Compound 1 displays a hierarchically pillared three-dimensional (3D) (3,4,5)-connected (4·6²) (4²·6⁴) (4³·6⁴·8³) net which is based on two-dimensional (2D) multicarboxylate- Zn^II layers strutted by the atez ligands. Sensing investigations of compound 1 reveal that this material can selectively and sensitively detect nitroaromatic compounds in water suspension through fluorescence quenching effect. In particular, it is worth noting that it shows highly specific detection of nitrobenzene (NB) and 2,4,6-trinitrophenol (TNP) with remarkable quenching constants (K_SV = 7.5 × 10⁴ M^-1 for NB and K_SV = 1.9 × 10⁵ M^-1 for TNP) and low limit of detection (LOD = 0.93 μM for NB and LOD = 0.36 μM for TNP). Investigations reveal that the probable mechanisms for such sensing processes are the concurrent presence of fluorescence resonance energy transfer (FRET) as well as photoinduced electron transfer (PET) between the CP and nitroaromatic molecules. This work not only offers an effective route to improve the application of fluorescent CPs but also provide one novel probable fluorescence probe for nitroaromatic compounds.

Engineering of metal-organic frameworks (MOFs) for thermometry

Metal-organic frameworks (MOFs ) are excellent candidates for use in chemistry, material sciences and engineering thanks to their interesting qualitative features and potential applications. Quite interestingly, the luminescence of MOFs can be engineered by regulation of the ligand design, metal ion selection and encapsulation of guest molecules within the MOF cavity. Temperature is a very crucial physical parameter and the market share of temperature sensors is rapidly expanding with technology and medicinal advancement. Among the wide variety of available temperature sensors, recently MOFs have emerged as potential temperature sensors with the capacity to precisely measure the temperature. Lanthanide-based thermometry has advantages because of its ratiometric response ability, high quantum yield and photostability, and therefore lanthanide-based MOFs were initially focused on to construct MOF thermometers. As science and technology have gradually changed, it has been observed that with the inclusion of dye, quantum dots, etc. within the MOF cavity, it is possible to develop MOF-based thermometry. This review consolidates the recent advances of MOF-based ratiometric thermometers and their mechanism of energy transfer for determining the temperature (thermal sensitivity and temperature uncertainty). In addition, some fundamental points are also discussed, such as concepts for guiding the design of MOF ratiometric thermometers, thermometric performance and tuning the properties of MOF thermometers.

Stacking Lanthanide-MOF Thin Films to Yield Highly Sensitive Optical Thermometers

Easy-to-integrate, remote read-out thermometers with fast response are of huge interest in numerous application fields. In the context of optical read-out devices, sensors based on the emission of lanthanides (Eu(III), Tb(III)) are particularly promising. Here, by using a layer-by-layer (LbL) approach in the liquid-phase epitaxy process, a series of continuous, low-thickness lanthanide-MIL-103 SURMOFs were fabricated to yield highly sensitive thermometers with optical readout. These Ln-SURMOFs exhibit remarkable temperature-sensing photoluminescence behavior, which can be read out using the naked eye. High transmittance is realized as well by precisely controlling the film thickness and the quality of these Ln-SURMOF thermometers. Moreover, we demonstrate that the thermal sensitivity can be improved in the temperature regime above 120 K, by controlling the energy transfer between Tb(III) and Eu(III). This performance is achieved by employing a sophisticated supramolecular architecture, namely MOF-on-MOF heteroepitaxy.

Dual-quenching electrochemiluminescence resonance energy transfer system from CoPd nanoparticles enhanced porous g-C3N4 to FeMOFs-sCuO for neuron-specific enolase immunosensing

For the diagnosis and therapy of small cell lung cancer (SCLC), the accurate and sensitive determination of neuron-specific enolase (NSE) content is crucial. This work outlines a dual-quenching electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor based on the double quenching effects of iron base metal organic frameworks (FeMOFs) loaded with small sized CuO nanoparticles (FeMOFs-sCuO) towards CoPd nanoparticles (CoPdNPs) enhanced porous g-C₃N₄ (P-C₃N₄-CoPdNPs). To be specific, we prepared a porous g-C₃N₄ (P-C₃N₄) which has a rich porous structure, and significantly increased the specific surface area and the number of reaction sites of P-C₃N₄. Meanwhile, the CoPdNPs were loaded onto P-C₃N₄ to improve the ECL luminescence property of P-C₃N₄/K₂S₂O₈ system through acting as a coreaction accelerator. In addition, the ultraviolet-visible (UV-vis) absorption spectra of FeMOFs and small sized CuO nanoparticles (sCuO) showed considerable overlap with the ECL emission spectra of P-C₃N₄ appropriately. Therefore, FeMOFs with high specific surface area were prepared and well combined with sCuO to effectively dual-quenching the ECL emission of P-C₃N₄ based on resonance energy transfer. Hence, a new type ECL-RET couple made up of P-C₃N₄-CoPdNPs (donor) and FeMOFs-sCuO (acceptor) were developed for the first time. A certain amount of P-C₃N₄-CoPdNPs, Ab₁, BSA, NSE were modified layer by layer onto the electrode surface. Then FeMOFs-sCuO-Ab₂ bioconjugates was incubated through the immune recognition binding. As a result, a sandwich-type ECL biosensor was manufactured successfully for NSE immunoassay. Under optimal experimental conditions, the limit of detection (LOD) and the limit of quantitation (LOQ) of the prepared ECL sensor for NSE analysis was 20.4 fg mL^-1 and 7.99 fg mL^-1, respectively, with the relative standard deviation (RSD) of 1.68%. The linear detection range was 0.0000500-100 ng mL^-1. The studied immunosensor had satisfactory sensitivity, specificity and reproducibility, manifesting the suggested sensing strategy might offer a good technical means and theoretical basis for the sensitivity analysis of NSE and has a potential application in clinical diagnosis analysis.

Trends in Siting of Metals in Heterometallic Nd-Yb Metal-Organic Frameworks and Molecular Crystals

Several studies suggest that metal ordering within metal-organic frameworks (MOFs) is important for understanding how MOFs behave in relevant applications; however, these siting trends can be difficult to determine experimentally. To garner insight into the energetic driving forces that may lead to nonrandom ordering within heterometallic MOFs, we employ density functional theory (DFT) calculations on several bimetallic metal-organic crystals composed of Nd and Yb metal atoms. We also investigate the metal siting trends for a newly synthesized MOF. Our DFT-based energy of mixing results suggest that Nd will likely occupy sites with greater access to electronegative atoms and that local homometallic domains within a mixed-metal Nd-Yb system are favored. We also explore the use of less computationally extensive methods such as classical force fields and cluster expansion models to understand their feasibility for large system sizes. This study highlights the impact of metal ordering on the energetic stability of heterometallic MOFs and crystal structures.

Fluorescent Eu3+/Tb3+ Metal-Organic Frameworks for Ratiometric Temperature Sensing Regulated by Ligand Energy

This work presents three series of Eu/Tb metal-organic frameworks (MOFs) containing benzophenone-4,4'-dicarboxylic acid (H₂BPNDC), 4,4'-dicarboxydiphenyl ether (H₂OBA), and terephthalic acid (H₂BDC) as the ligands. Eu/Tb MOFs have the same structural features in that their 3D frameworks are simplified as 2,3,10-connected {4².6}₂{4⁶.6¹⁸.8¹⁹.10²}{4}₂ topological networks. The solid-state fluorescence spectra of three Eu/Tb MOF series are attributed to the combined emissions of ⁵D₀ → ⁷F_J (J = 1-4) transitions in Eu³⁺ and ⁵D₄ → ⁷F_J (J = 6-5) transitions in Tb³⁺. The n_Eu:n_Tb of Eu/Tb MOFs is optimized as 1:69 based on the relationships between I_Tb(545)/I_Eu(614) and n_Eu:n_Tb; that is, Eu_0.0143Tb_0.9857-L (L = BPNDC^2-, OBA^2-, and BDC^2-) were selected to carry out the following temperature (T)-sensing tests. The fluorescence mechanism of Eu_0.0143Tb_0.9857-L can be explained by a ligand-to-metal charge transfer combined with an intermetallic Tb³⁺ → Eu³⁺ energy transfer. The T-dependent fluorescence indicates linear relationships with sensitivities of 1.85% K^-1 for Eu_0.0143Tb_0.9857-BPNDC, 6.49% K^-1 for Eu_0.0143Tb_0.9857-OBA, and 0.28% K^-1 for Eu_0.0143Tb_0.9857-BDC. The influence of T on the lowest excited triplet energy levels (T1 values) of the ligands reveals that the ligand energy regulation impacts their fluorescence properties, including the sensitivity, fluorescence quenching rate, quantum yield, and fluorescence lifetime. This shows that Eu_0.0143Tb_0.9857-BPNDC is sufficiently sensitive to T, making it applicable in noncontact T measurements.

Three isostructural hexanuclear lanthanide-organic frameworks for sensitive luminescence temperature sensing over a wide range

Temperature sensing plays essential roles in both fundamental research and high-tech applications. In this work, three isomorphic hexanuclear lanthanide metal-organic frameworks (Ln-MOFs), Ln(BPDC-xN) (Ln = Eu³⁺/Tb³⁺, x = 0, 1, 2) were prepared based on the cluster-based synthesis strategy with three structurally similar dicarboxylate ligands 4,4'-biphenyldicarboxylic acid (H₂BPDC-0N), 6-(4-carboxyphenyl)nicotinic acid (H₂BPDC-1N), and [2,2'-bipyridine]-5,5'-dicarboxylic acid (H₂BPDC-2N) as the organic linkers. The as-synthesized Ln-MOFs were fully characterized using single-crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), elemental analysis (EA), and Fourier transform infrared spectra (FT-IR). Using a Eu³⁺/Tb³⁺ co-doping approach, Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) were identified as potential ratiometric luminescence thermometers. Since there are two suitable distances between the energy donors and acceptors within the framework for efficient energy transfer, all Eu_0.001Tb_0.999(BPDC-xN) (x = 0, 1, 2) maintain high relative sensitivity over a wide temperature range from 50 K to 300 K.

A Highly Stable Yttrium Organic Framework as a Host for Optical Thermometry and D2 O Detection

The yttrium organic framework (Y0.89 Tb0.10 Eu0.01 )6 (BDC)7 (OH)4 (H2 O)4 (BDC=benzene-1,4-dicarboxylate) is hydrothermally stable up to at least 513 K and thermally stable in air in excess of 673 K. The relative intensities of luminescence of Tb3+ and Eu3+ are governed by Tb3+ -to-Eu3+ phonon-assisted energy transfer and Tb3+ -to-ligand back transfer and are responsible for the differing temperature-dependent luminescence of the two ions. This provides a ratiometric luminescent thermometer in the 288-573 K temperature range, not previously seen for MOF materials, with a high sensitivity, 1.69±0.04 % K-1 at 523 K. In aqueous conditions, loosely bound H2 O can be replaced by D2 O in the same material, which modifies decay lifetimes to yield a quantitative luminescent D2 O sensor with a useful sensitivity for practical application.

A multi-responsive luminescent sensor based on a stable Eu(iii) metal–organic framework for sensing Fe3+, MnO4−, and Cr2O72− in aqueous solutions

A stable benzothiadiazole-based Eu(iii) metal–organic framework with cco topology has been successfully constructed, and represents the multifunctional fluorescence sensor toward Fe3+, MnO4− and Cr2O72− in aqueous solutions.

Fabrication of a Stable Europium-Based Luminescent Sensor for Fast Detection of Urinary 1-Hydroxypyrene Constructed from a Tetracarboxylate Ligand

A novel europium-centered metal-organic framework fabricated from a symmetric and rigid ligand with tetracarboxylate groups, 2,6-di(2',5'-dicarboxylphenyl)pyridine (H₄ddpp), has been synthesized solvothermally. Characterized by single-crystal X-ray diffraction, compound 1 features a 3D microporous structure with a butterfly-shaped trinuclear Eu₃(COO)₆ secondary building unit. Interestingly, three kinds of 1D open channels viewed in different directions in compound 1 are discovered, and the void ratio is calculated to be 47.5% by PLATON software. Solid-state luminescent experiments at 298 K reveal that compound 1 displays naked-eye characteristic red emission of Eu³⁺ ions monitoring the typical ⁵D₀ → ⁷F₂ transition. The exploration of luminescent sensing tests discloses that compound 1 has an outstanding capacity for recognizing urinary 1-hydroxypyrene (1-HP) with a quite fast response and high sensitivity, giving the quenching efficiency of 98.2% after the immersion time for just 1 min and 73.2% with the amount of 1-HP only 0.05 mg/mL. To our knowledge, it is the first reported Eu-MOF as an extremely fast-responsive and highly sensitive luminescent sensor for 1-HP which is interference-free from other urinary components. Furthermore, the successful preparation of the luminescent test papers makes compound 1 convenient, easy, and real-time in the application for sensing 1-HP in biomedical and biological fields.

Watching Microwave-Induced Microscopic Hot Spots via the Thermosensitive Fluorescence of Europium/Terbium Mixed-Metal Organic Complexes

The hypothesis of microscopic hot spots is widely used to explain the unique microwave (MW) effect in materials science and chemical engineering, but it has not yet been directly measured. Herein we use Eu/Tb mixed-metal organic complexes as nano thermometers to probe the intrinsic temperature of MW-absorbing particles in MW fields based on the thermosensitive fluorescent spectra. According to the measurements of the temperature gradient at the solid/liquid interphase, we derive an MW-irradiated energy transfer model to predict the extent of microscopic hot spots. The fluorescence results agree with the model predictions that the MW-induced temperature gradient can be enlarged by increasing MW intensity, as well as the dielectric loss and size of particles. Conversely, the increase in the thermal conductivity and the dielectric loss of the liquid lowers the temperature gradient. This study enables control of MW-assisted synthesis and MW-responsive techniques.

Metal-Organic Framework Photonic Balls: Single Object Analysis for Local Thermal Probing

Due to their high porosity and chemical versatility, metal-organic frameworks (MOFs) exhibit physical properties appealing for photonic-based applications. While several MOF photonic structures have been reported, examples of applications thereof are mainly limited to chemical sensing. Herein, the range of application of photonic MOFs is extended to local thermal and photothermal sensing by integrating them into a new architecture: MOF photonic balls. Micrometric-sized photonic balls are made of monodispersed MOFs colloids that are self-assembled via spray-drying, a low-cost, green, and high-throughput method. The versatility of the process allows tuning the morphology and the composition of photonic balls made of several MOFs and composites with tailored optical properties. X-ray nanotomography and environmental hyperspectral microscopy enable analysis of single objects and their evolution in controlled atmosphere and temperature. Notably, in presence of vapors, the MOF photonic balls act as local, label-free temperature probes. Importantly, compared to other thermal probes, the temperature detection range of these materials can be adjusted "on-demand." As proof of concept, the photonic balls are used to determine local temperature profiles around a concentrated laser beam. More broadly, this work is expected to stimulate new research on the physical properties of photonic MOFs providing new possibilities for device fabrication.

Luminescent PMMA Films and PMMA@SiO2 Nanoparticles with Embedded Ln3+ Complexes for Highly Sensitive Optical Thermometers in the Physiological Temperature Range*

In recent years, luminescent materials doped with Ln³⁺ ions have attracted much attention for their application as optical thermometers based on both downshifting and upconversion processes. This study presents research done on the development of highly sensitive optical thermometers in the physiological temperature range based on poly(methyl methacrylate) (PMMA) films doped with two series of visible Ln³⁺ complexes (Ln³⁺ =Tb³⁺ , Eu³⁺ , and Sm³⁺ ) and SiO₂ nanoparticles (NPs) coated with these PMMA films. The best performing PMMA film doped with Tb³⁺ and Eu³⁺ complexes was the PMMA[TbEuL₁ tppo]1 film (L₁ =4,4,4-trifluoro-1-phenyl-1,3-butadionate; tppo=triphenylphosphine oxide), which showed good temperature sensing of S_r =4.21 % K^-1 at 313 K, whereas for the PMMA films doped with Tb³⁺ and Sm³⁺ complexes the best performing was the PMMA[TbSmL₂ tppo]3 film (L₂ =4,4,4-trifluoro-1-(4-chlorophenyl)-1,3-butadionate), with S_r =3.64 % K^-1 at 313 K. Additionally, SiO₂ NPs coated with the best performing films from each of the series of PMMA films (Tb-Eu and Tb-Sm) and their temperature-sensing properties were studied in water, showing excellent performance in the physiological temperature range (PMMA[TbEuL₁ tppo]1@SiO₂ : S_r =3.84 % °C at 20 °C; PMMA[TbSmL₂ tppo]3@SiO₂ : S_r =3.27 % °C at 20 °C) and the toxicity of these nanoparticles on human cells was studied, showing that they were nontoxic.

The construction of a novel luminescent lanthanide framework for the selective sensing of Cu2+ and 4-nitrophenol in water

It is challenging to develop highly stable lanthanide luminescent sensors for detecting heavy metal ions and nitroaromatics in view of the human health and environmental security. To this end, two water stable Ln-MOFs with the chemical constitution of {[Ln(HL)]·3DMF·3H2O}n (Ln = Eu, LZG-Eu and Ln = Tb, LZG-Tb) have been developed solvothermally using a multidentate ligand (H4L) with the central phenyl backbone bisubstituted by 2,6-pyridine-dicarboxylic acid at the para-position, H4L = 1,4-bis(2',2'',6',6''-tetracarboxy-1,4':4,4''-pyridyl)benzene. Single crystal analysis demonstrates that two novel Ln-MOFs feature 4,4,4-connected nets with an unprecedented topology symbol of {42·6·83}2{42·62·82}{42·84} and contain two kinds of one-dimensional channels. Powder X-ray diffraction as well as the luminescence determination results indicate that they retain their crystallinity and structural integrity in harsh acidic and basic conditions with pH in the range of 4-11. Moreover, they are highly luminescent, which makes them excellent chemical sensors for detecting Cu2+ and 4-NP (4-nitrophenol) with high selectivity and sensitivity in aqueous media such as deionized water, tap water, and river water based on distinct quenching effects. To the best of our knowledge, their detection limits are lower than those documented so far. In addition, the quenching efficiency of 4-NP was retained in the presence of interfering ions even after the compounds were used for five cycles, which makes them attractive, reliable, visual, and recyclable luminescent Ln-MOF sensor materials for 4-NP. The recognition mechanism for Cu2+ could be attributed to the dissociation of the main framework induced by Cu2+ and the subsequent formation of a Cu2+ coordination species and that for 4-NP is considered to be multi-quenching mechanisms dominated by competition absorption.

Synergetic Effect of Tetraethylammonium Bromide Addition on the Morphology Evolution and Enhanced Photoluminescence of Rare-Earth Metal-Organic Frameworks

Controlled synthesis of rare-earth metal-organic frameworks (RE-MOFs) is of great significance to match their emerging multifunctional luminescence applications. Herein, we propose a green and general solvent-free synthetic strategy for the adjustment of morphology and dimension of various RE-MOFs (RE = Eu, Tb, Er, Dy, Y, Tm) by using a tetraethylammonium bromide-assisted thermal-heating method. These self-assembled RE-MOF materials possess controllable morphologies and hierarchical structures while retaining the structural topology of MIL-78, proving that the strategy is a feasible and effective way in opening up large-scale synthesis of RE-MOFs. It is further found that the tetraethylammonium could be carbonized into carbon dots and encapsulated in Eu/Tb-MIL-78 to enhance the fluorescence emission intensities significantly, making the hierarchical Eu/Tb-MIL-78 MOF materials good candidates for the latent fingerprints recognition application. This work provides a novel strategy for effectively controlling the morphology and dimension of RE-MOFs materials with enhanced photoluminescence and has great potential in their scaling-up syntheses and exploring the new luminescence applications.

Cd-Based Metal-Organic Framework Containing Uncoordinated Carbonyl Groups as Lanthanide Postsynthetic Modification Sites and Chemical Sensing of Diphenyl Phosphate as a Flame-Retardant Biomarker

With the judicious selection of an appropriate semirigid polycarboxylate, 2,5-bis(3',5'-dicarboxylphenyl)benzoic acid (H₅bdba), and an inorganic metal ion, a novel anionic framework, {[NH₂(CH₃)₂]₂·[Cd_3.5(bdba)(Hbdba)(H₂O)_1.5]}_n (Cd-MOF), has been synthesized solvothermally. Single-crystal measurement results show that the prepared Cd-MOF features a three-dimensional structure containing two types of one-dimensional channels, and as we expected, there exist accessible uncoordinated -COOH groups on Hbdba pointing toward the rhombus channels. Powder X-ray diffraction and thermogravimetric analysis measurements were performed for the thermal and chemical stability analysis of Cd-MOF. In addition, the lanthanide(III)-functionalized hybrids, Ln(III)@Cd-MOF, were initially prepared by coordinated postsynthetic modification to incorporate luminescent Ln(III) ions into the structure. The luminescence properties of the hybrids are studied, and the results show notable and specialized fluorescent sensitization of Cd-MOF to Tb(III) ions. Moreover, the Tb(III)@Cd-MOF hybrid with outstanding fluorescence properties was developed as a highly sensitive and selective luminescent probe for the biomarker diphenyl phosphate (DPP) based on multiquenching effects. Tb(III)@Cd-MOF is the first case to realize the detection of urinary DPP through lanthanide metal-organic framework fluorescence spectrometry and shows practical detection potential.

How does the ligand affect the sensitivity of the luminescent thermometers based on Tb-Eu complexes

Theoretical description of a four-level system for luminescent thermometry was proposed. Based on this description, the sensitivity was proved not to exceed Sr =|E23 - E12|/T2, where T is the temperature and |E23 - E12| is the absolute energy difference between the excited state energy gaps. The analysis was verified for the terbium-europium coordination compounds, the most studied class of four-level thermometry systems, which revealed that most of the examples fall within either this theory or represent three-level systems, where the ligand is not involved in the thermally-activated processes. From this description, it follows that the highest Sr can be reached either when the triplet state is not involved or when the ligand triplet state is very high, which in the case of terbium-europium coordination compounds means exceeding 26 800 cm-1.

Operando Nanoscale Sensors in Catalysis: All Eyes on Catalyst Particles

An era of circularity requires robust and flexible catalysts and reactors. We need profound knowledge of catalytic surface reactions on the local scale (i.e., angstrom-nanometer), whereas the reaction conditions, such as reaction temperature and pressure, are set and controlled on the macroscale (i.e., millimeter-meter). Nanosensors operating on all relevant length scales can supply this information in real time during operando working conditions. In this Perspective, we demonstrate the potential of nanoscale sensors, with special emphasis on local molecular sensing with shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) and local temperature sensing with luminescence thermometry, to acquire new insights of the reaction pathways. We also argue that further developments should be focused on local pressure measurements and on expanding the applications of these local sensors in other areas, such as liquid-phase catalysis, electrocatalysis, and photocatalysis. Ideally, a combination of sensors will be applied to monitor catalyst and reactor "health" and serve as feedback to the reactor conditions.

Ratiometric dual fluorescence tridurylboron thermometers with tunable measurement ranges and colors

Noncontact ratiometric fluorescent thermometers have received great interests in recent years. Besides being a sensitive and easily observable detection signal, the ratiometric dual fluorescence are also highly accurate and resistable to interference. However, organic molecular thermometers with such fluorescence property are very rare, and their measurement ranges and colors are limited. In this work, a series of ratiometric dual fluorescent tridurylboron thermometers, with tunable measurement ranges and colors, are designed and synthesized. The measurement ranges of the thermometers are -20 °C-40 °C, -10 °C-50 °C and -25 °C-30 °C in solid polymeric systems, and -50 °C-100 °C and -30 °C-110 °C in liquid organic solvent. With decreasing temperature, the fluorescence colors of tridurylboron-MOE thermometers are from green yellow to yellow red, green to green yellow, blue to green. This study provides a novel strategy for developing tunable ratiometric dual fluoresence organic molecular thermometers.

Construction of efficient dual activating ratiometric YVO4:Nd3+/Eu3+ nanothermometers using co-doped and mixed phosphors

The development of new contactless thermal nanosensors based on a ratiometric approach is of significant interest. To overcome the intrinsic limitations of thermally coupled levels, a dual activation strategy was applied. Dual activation was performed using co-doped single nanoparticles and a binary mixture of single-doped nanoparticles. Co-doped and mixed YVO₄:Nd³⁺/Eu³⁺ nanoparticles were successfully demonstrated as luminescent nanothermometers and their thermometric performance, in terms of thermal sensitivity, temperature resolution and repeatability, was studied and compared.

Novel Ce(III)-Metal Organic Framework with a Luminescent Property To Fabricate an Electrochemiluminescence Immunosensor

We designed a novel luminescent metal-organic framework (MOF) named Ce-TCPP-LMOF (CTM) through a simple one-pot solvothermal method. CTM was synthesized by using the emerging electrochemiluminescent (ECL) material (4,4',4″,4‴-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid) as the organic ligand and Ce(III) as the metal node. We found that CTM not only has the remarkable ability to emit light but also has a uniform "sandwich biscuit" shape and suitable nanoscale size, which are promising for further applications. We also applied CTM to construct a novel ECL immunosensor and achieve sensitive detection of the proprotein convertase subtilisin/kexin type 9 (PCSK9), a biomarker related to cardiovascular diseases. To further amplify the ECL signal of CTM, a novel dual-amplified signal strategy was established by inducing a polyamidoamine dendrimer (PAMAM) and gold nanoparticles (AuNPs). Importantly, we first proved that the ECL signal of the CTM/S₂O₈^2- system could be enhanced by the PAMAM electric field. As the electron transfer rate was accelerated by the AuNP layer, this ECL signal was further enhanced in AuNP-modified electrodes. The ECL immunosensor showed desirable performance for PCSK9 analysis within a detection range of 50 fg mL^-1 to 10 ng mL^-1 and a low limit of detection of 19.12 ± 2.69 fg mL^-1. Real sample detection suggested that the immunosensor holds great potential for analyzing clinical serum samples.

Metal–organic frameworks with solvent-free lanthanide coordination environments: synthesis from aqueous ethanol solutions

Twelve MOFs with a solvent-free environment of Ln³⁺ cations were obtained through solution synthesis in the presence of cluster anions.

Thermo-responsive light-emitting metal complexes and related materials

This review discusses the fundamentals and design strategies for the development of thermo-responsive metal–ligand coordination materials and the applications of these materials in temperature sensing, bioimaging, information security, etc.

Lanthanide-Oligomeric Brush Films: From Luminescence Properties to Structure Resolution

Lanthanide (Ln) based luminescent materials are experiencing an increasing interest in their applications in several fields. In this study, we report a series of new lanthanide-oligomeric brush films, supported on quartz substrates and prepared using a layer-by-layer method (LbL). Oligomeric brush films are composed of small oligomers from our previously reported coordination polymers [x-EuL] and [x-TbL] (with x = 1, 3, and 5 generations of Ln complexes), which are grown perpendicularly from a carboxylate self-assembled monolayer. Oligomers composed of our previously described helical lanthanide complex LnL (Ln: Eu and Tb) as a luminescent moiety and benzene-1,4-dicarboxylate acid (bdc) used as a linker. Mixed films having the fifth-generation Ln complexes composed of equimolar mixture of Eu and Tb ions were prepared. Oligomeric brush films are highly transparent and exhibited a colored emission under UV irradiation. Pure Ln (Eu or Tb) films showed a strong luminescence from the Ln ions. Their luminescent properties depended on the number of lanthanide layers in the films composed of the first to third generations of lanthanide complexes. Then, the increase of the complex layers induced no difference in the luminescent properties. An energy transfer from Tb to Eu ions in the mixed films indicated a short distance between lanthanide ions of a fifth layer. The structural analysis together with the observed luminescent properties and some previous studies allowed to clarify the disposition of the oligomers in the films.

A Water-Stable Terbium(III)-Organic Framework as a Chemosensor for Inorganic Ions, Nitro-Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro-compounds, excessive Fe³⁺ and MnO₄ ^- , is crucial for human health and environmental protection. Here, a new terbium(III)-organic framework, namely [Tb(TATAB)(H₂ O)]⋅2H₂ O (Tb-MOF, H₃ TATAB=4,4',4''-s-triazine-1,3,5-triyltri-m-aminobenzoic acid), was assembled and characterized. The Tb-MOF exhibits a water-stable 3D bnn framework. Due to the existence of competitive absorption, Tb-MOF has a high selectivity for detecting Fe³⁺ , MnO₄ ^- , 4-nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb-MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III -based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro-compounds, and antibiotics simultaneously.