Highly soluble fluorine containing Cu(i) AlkylPyrPhos TADF complexes

From Mono- to Polynuclear 2-(Diphenylphosphino)pyridine-Based Cu(I) and Ag(I) Complexes: Synthesis, Structural Characterization, and DFT Calculations

A series of monometallic Ag(I) and Cu(I) halide complexes bearing 2-(diphenylphosphino)pyridine (PyrPhos, L) as a ligand were synthesized and spectroscopically characterized. The structure of most of the derivatives was unambiguously established by X-ray diffraction analysis, revealing the formation of mono-, di-, and tetranuclear complexes having general formulas MXL3 (M = Cu, X = Cl, Br; M = Ag, X = Cl, Br, I), Ag2X2L3 (X = Cl, Br), and Ag4X4L4 (X = Cl, Br, I). The Ag(I) species were compared to the corresponding Cu(I) analogues from a structural point of view. The formation of Cu(I)/Ag(I) heterobimetallic complexes MM'X2L3 (M/M' = Cu, Ag; X = Cl, Br, I) was also investigated. The X-ray structure of the bromo-derivatives revealed the formation of two possible MM'Br2L3 complexes with Cu/Ag ratios, respectively, of 7:1 and 1:7. The ratio between Cu and Ag was studied by scanning electron microscopy-energy-dispersive X-ray analysis (SEM-EDX) measurements. The structure of the binuclear homo- and heterometallic derivatives was investigated using density functional theory (DFT) calculations, revealing the tendency of the PyrPhos ligands not to maintain the bridging motif in the presence of Ag(I) as the metal center.

Photoluminescent copper(I) iodide alkylpyridine thin films as sensors for volatile halogenated compounds

The paper presents the fabrication and characterization of [CuI(L)]n thin films, where L represents various alkylpyridine ligands including 4-methylpyridine, 3-methylpyridine, 2-methylpyridine, 4-tbutylpyridine, 3,4-dimethylpyridine, and 3,5-dimethylpyridine. The thin films were synthesized by exposing the corresponding ligands to CuI thin films through vapor deposition. The coordination reactions occurring on the films were investigated using PXRD and time-dependent photoluminescence spectroscopy, and a comparison was made between the structures of the thin films and the corresponding powder phases. The films showed primarly blue emission (λem = 457-515 nm) and polymeric structures with excited state lifetimes ranging from 0.6 to 5.5 μs. Significantly, the studied compounds exhibited fast reversible luminescence quenching when exposed to vapors of dichloromethane and dibromomethane (15 and 30 min respectively), and the luminescence was restored upon re-exposure to the alkylpyridine ligand (after 20 min). These findings indicate that these thin films hold promise for applications as sensors (with sensitive and reversible detection capability) for volatile halogen-based compounds (VHC).

Heterometallic Au(I)-Cu(I) Clusters: Luminescence Studies and 1O2 Production

Two different organometallic gold(I) compounds containing naphthalene and phenanthrene as fluorophores and 2-pyridyldiphenylphosphane as the ancillary ligand were synthesized (compounds 1 with naphthalene and 2 with phenanthrene). They were reacted with three different copper(I) salts with different counterions (PF₆^-, OTf^-, and BF₄^-; OTf = triflate) to obtain six Au(I)/Cu(I) heterometallic clusters (compounds 1a-c for naphthalene derivatives and 2a-c for phenanthrene derivatives). The heterometallic compounds present red pure room-temperature phosphorescence in both solution, the solid state, and air-equilibrated samples, as a difference with the dual emission recorded for the gold(I) precursors 1 and 2. The presence of Au(I)-Cu(I) metallophilic contacts has been identified using single-crystal X-ray diffraction structure resolution of two of the compounds, which play a direct role in the resulting red-shifted emission with respect to the gold(I) homometallic precursors. Polystyrene (PS) and poly(methyl methacrylate) (PMMA) polymeric matrices were doped with our luminescent compounds, and the resulting changes in their emissive properties were analyzed and compared with those previously recorded in the solution and the solid state. All complexes were tested to analyze their ability to produce ¹O₂ and present very good values of Φ_Δ up to 50%.

TADF: Enabling luminescent copper(i) coordination compounds for light-emitting electrochemical cells

The last decade has seen a surge of interest in the emissive behaviour of copper(i) coordination compounds, both neutral compounds that may have applications in organic light-emitting doides (OLEDs) and copper-based ionic transition metal complexes (Cu-iTMCs) with potential use in light-emitting electrochemical cells (LECs). One of the most exciting features of copper(i) coordination compounds is their possibility to exhibit thermally activated delayed fluorescence (TADF) in which the energy separation of the excited singlet (S₁) and excited triplet (T₁) states is very small, permitting intersystem crossing (ISC) and reverse intersystem crossing (RISC) to occur at room temperature without the requirement for the large spin-orbit coupling inferred by the presence of a heavy metal such as iridium. In this review, we focus mainly in Cu-iTMCs, and illustrate how the field of luminescent compounds and those exhibiting TADF has developed. Copper(i) coordination compounds that class as Cu-iTMCs include those containing four-coordinate [Cu(P^P)(N^N)]⁺ (P^P = large-bite angle bisphosphane, and N^N is typically a diimine), [Cu(P)₂(N^N)]⁺ (P = monodentate phosphane ligand), [Cu(P)(tripodal-N₃)]⁺, [Cu(P)(N^N)(N)]⁺ (N = monodentate N-donor ligand), [Cu(P^P)(N^S)]⁺ (N^S = chelating N,S-donor ligand), [Cu(P^P)(P^S)]⁺ (P^S = chelating P,S-donor ligand), [Cu(P^P)(NHC)]⁺ (NHC = N-heterocyclic carbene) coordination domains, dinuclear complexes with P^P and N^N ligands, three-coordinate [Cu(N^N)(NHC)]⁺ and two-coordinate [Cu(N)(NHC)]⁺ complexes. We pay particular attention to solid-state structural features, e.g. π-stacking interactions and other inter-ligand interactions, which may impact on photoluminescence quantum yields. Where emissive Cu-iTMCs have been tested in LECs, we detail the device architectures, and this emphasizes differences which make it difficult to compare LEC performances from different investigations.

Comprehensive Picture of the Excited State Dynamics of Cu(I)- and Ru(II)-Based Photosensitizers with Long-Lived Triplet States

Ru(II)- and Cu(I)-based photosensitizers featuring the recently developed biipo ligand (16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one) were comprehensively investigated by X-ray crystallography, electrochemistry, and especially several time-resolved spectroscopic methods covering all time scales from femto- to milliseconds. The analysis of the experimental results is supported by density functional theory (DFT) calculations. The biipo ligand consists of a coordinating 1,10-phenanthroline moiety fused with a 1,8-naphthalimide unit, which results in an extended π-system with an incorporated electron acceptor moiety. In a previous study, it was shown that this ligand enabled a Ru(II) complex that is an efficient singlet oxygen producer and of potential use for other light-driven applications due to its long emission lifetime. The goal of our here presented research is to provide a full spectroscopic picture of the processes that follow optical excitation. Interestingly, the Ru(II) and Cu(I) complexes differ in their characteristics even though the lowest electronically excited states involve in both cases the biipo ligand. The combined spectroscopic results indicate that an emissive ³MLCT state and a rather dark ³LC state are populated, each to some extent. For the Cu(I) complex, most of the excited population ends up in the ³LC state with an extraordinary lifetime of 439 μs in the solid state at 20 K, while a significant population of the ³MLCT state causes luminescence for the Ru(II) complex. Hence, there is a balance between these two states, which can be tuned by altering the metal center or even by thermal energy, as suggested by the temperature-dependent experiments.

Thermally Activated Delayed Fluorescence and Phosphorescence Quenching in Iminophosphonamide Copper and Zinc Complexes

The synthesis of copper and zinc complexes of four variably substituted iminophosphonamide ligands is presented. While the copper complexes form ligand-bridged dimers, the zinc compounds are monomeric. Due to different steric demand of the ligand the arrangement of the ligands within the dimeric complexes varies. Similar to the structurally related iminophosphonamide complexes of alkali metals and calcium, the steady-state and time-resolved photoluminescence (PL) of four of the seven compounds studied here as solids in a temperature range of 5-295 K can be described within the scheme of thermally activated delayed fluorescence (TADF). Accordingly, they exhibit bright blue-green phosphorescence at low temperatures (<100 K), which turns into delayed fluorescence by increasing the temperature. However, unusually, the fluorescence is practically absent in two copper complexes which otherwise still conform to the TADF scheme. In these cases, the excited singlet states decay essentially non-radiatively and their thermal population from the corresponding low-lying triplet states efficiently quenches PL (phosphorescence). Three other copper and zinc complexes only exhibit prompt fluorescence, evidencing a wide variation of photophysical properties in this class of compounds. The excited states of the copper complex with especially pronounced phosphorescence quenching were also investigated by low-temperature time-resolved infrared spectroscopy and quantum chemical calculations.

Coordination-induced emission enhancement in copper(I) iodide coordination polymers supported by 2-(alkylsulfanyl)pyrimidines

First examples of copper(i) complexes with 2-(alkylsulfanyl)pyrimidine ligands have been synthesized. Reactions of copper(i) iodide with 2-(methylsulfanyl)pyrimidine (L1) in various metal-to-ligand molar ratios in MeCN afford a ladder-type coordination polymer [Cu2L1I2]n with polymeric chains built from double-stranded (Cu2I2)n ribbons supported on both sides by μ2-N,S-L1 molecules. Although the second ligand, 2-(ethylsulfanyl)pyrimidine (L2), differs from L1 only by a methylene group, its reactions with copper(i) iodide in MeCN yield not only a congenerous coordination polymer, [Cu2L2I2]n, but also [CuL2I]n, in which a similar (Cu2I2)n ribbon is decorated by N-monodentate L2 molecules. Absorption spectra of all compounds represent an interplay of metal + iodine-to-ligand charge transfer (XMLCT) and ligand-centered (LC) and cluster-centered (CC) transitions, while the emission occurs from the excited states of XMLCT nature. The luminescence of [Cu2L1I2]n and [Cu2L2I2]n is blue-shifted and greatly enhanced in comparison with that of [CuL2I]n (quantum yields: 89% and 68% for [Cu2L1I2]n and [Cu2L2I2]nvs. 23% for [CuL2I]n at 77 K), which can be associated with a more rigid μ2-N,S coordination of 2-(alkylsulfanyl)pyrimidine ligands in [Cu2L1I2]n and [Cu2L2I2]n leading to a less distorted T1 state.

Cyan-Emitting Cu(I) Complexes and Their Luminescent Metallopolymers

Copper complexes have shown great versatility and a wide application range across the natural and life sciences, with a particular promise as organic light-emitting diodes. In this work, four novel heteroleptic Cu(I) complexes were designed in order to allow their integration in advanced materials such as metallopolymers. We herein present the synthesis and the electrochemical and photophysical characterisation of these Cu(I) complexes, in combination with ab initio calculations. The complexes present a bright cyan emission (λem ~ 505 nm) in their solid state, both as powder and as blends in a polymer matrix. The successful synthesis of metallopolymers embedding two of the novel complexes is shown. These copolymers were also found to be luminescent and their photophysical properties were compared to those of their polymer blends. The chemical nature of the polymer backbone contributes significantly to the photoluminescence quantum yield, paving a route for the strategic design of novel luminescent Cu(I)-based polymeric materials.

Investigation of Luminescent Triplet States in Tetranuclear CuI Complexes: Thermochromism and Structural Characterization

To develop new and flexible CuI containing luminescent substances, we extend our previous investigations on two metal-centered species to four metal-centered complexes. These complexes could be a basis for designing new organic light-emitting diode (OLED) relevant species. Both the synthesis and in-depth spectroscopic analysis, combined with high-level theoretical calculations are presented on a series of tetranuclear CuI complexes with a halide containing Cu4 X4 core (X=iodide, bromide or chloride) and two 2-(diphenylphosphino)pyridine bridging ligands with a methyl group in para (4-Me) or ortho (6-Me) position of the pyridine ring. The structure of the electronic ground state is characterized by X-ray diffraction, NMR, and IR spectroscopy with the support of theoretical calculations. In contrast to the para system, the complexes with ortho-substituted bridging ligands show a remarkable and reversible temperature-dependent dual phosphorescence. Here, we combine for the first time the luminescence thermochromism with time-resolved FTIR spectroscopy. Thus, we receive experimental data on the structures of the two triplet states involved in the luminescence thermochromism. The transient IR spectra of the underlying triplet metal/halide-to-ligand charge transfer (3 M/XLCT) and cluster-centered (3 CC) states were obtained and interpreted by comparison with calculated vibrational spectra. The systematic and significant dependence of the bridging halides was analyzed.

A Brief History of OLEDs-Emitter Development and Industry Milestones

Organic light-emitting diodes (OLEDs) have come a long way ever since their first introduction in 1987 at Eastman Kodak. Today, OLEDs are especially valued in the display and lighting industry for their promising features. As one of the research fields that equally inspires and drives development in academia and industry, OLED device technology has continuously evolved over more than 30 years. OLED devices have come forward based on three generations of emitter materials relying on fluorescence (first generation), phosphorescence (second generation), and thermally activated delayed fluorescence (third generation). Furthermore, research in academia and industry toward the fourth generation of OLEDs is in progress. Excerpts from the history of green, orange-red, and blue OLED emitter development on the side of academia and milestones achieved by key players in the industry are included in this report.

Synthesis, structure and photophysical properties of two tetranuclear copper(I) iodide complexes based on acetylpyridine and diphosphine mixed ligands

Two copper(I) iodide tetramers, namely, [μ₂-1,3-bis(diphenylphosphanyl)propane-κ²P:P']di-μ₃-iodido-di-μ₂-iodido-[1-(pyridin-3-yl)ethan-1-one-κN]tetracopper(I) dichloromethane disolvate, [Cu₄I₄(C₆H₇NO)₂(C₂₇H₂₆P₂)₂]·2CH₂Cl₂ (CuL³), and [μ₂-1,3-bis(diphenylphosphanyl)propane-κ²P:P']di-μ₃-iodido-di-μ₂-iodido-[1-(pyridin-4-yl)ethan-1-one-κN]tetracopper(I), [Cu₄I₄(C₆H₇NO)₂(C₂₇H₂₆P₂)₂] (CuL⁴), have been synthesized from reactions of CuI, 1,3-bis(diphenylphosphanyl)propane (dppp) and 3- or 4-acetylpyridine (3/4-acepy). The complexes were characterized by elemental analysis, IR spectroscopy, single-crystal X-ray diffraction (XRD), powder XRD and photoluminescence spectroscopy. Both complexes possess a stair-step [Cu₄I₄] cluster structure with a crystallographic inversion centre located in the middle of a Cu₂I₂ ring (Z' = 1/2). The dppp ligands each adopt a bidentate coordination mode that bridges two Cu^I centres on one side of the [Cu₄I₄] cluster and the acepy ligands act as terminal ligands. The solid-state samples of similar complexes show highly efficiency thermally activated delayed fluorescence (TADF) at room temperature. At ambient temperature, both CuL³ and CuL⁴ exhibit photoluminescence, with a maximum emission in the region 560-580 nm and with short emissive decay times, but only phosphorescence was observed at 77 K. The narrow gaps between the higher lying singlet state and the triplet state, ΔE(S₁ - T₁), also confirm the presence of TADF. Structure analysis and consideration of photoluminescence indicates that the position of the acetyl group on the heterocyclic ligand has an obvious influence on the structural arrangement, on intermolecular interactions and on the observed photophysical properties.

Various Structural Design Modifications: para-Substituted Diphenylphosphinopyridine Bridged Cu(I) Complexes in Organic Light-Emitting Diodes

The well-known system of dinuclear Cu(I) complexes bridged by 2-(diphenylphosphino)pyridine (PyrPhos) derivatives Cu₂X₂L₃ and Cu₂X₂LP₂ (L = bridging ligand, P = ancillary ligand) goes along with endless variation options for tunability. In this work, the influence of substituents and modifications on the phosphine moiety of the NP-bridging ligand was investigated. In previous studies, the location of the lowest unoccupied molecular orbital (LUMO) of the copper complexes of the PyrPhos family was found to be located on the NP-bridging ligand and enabled color tuning in the whole visible spectrum. A multitude of dinuclear Cu(I) complexes based on the triple methylated 2-(bis(4-methylphenyl)phosphino)-4-methylpyridine (Cu-1b-H, Cu-1b-MeO, and Cu-1b-F) up to complexes bearing 2-(bis(4-fluorophenyl)phosphino)pyridine (Cu-6a-H) with electron-withdrawing fluorine atoms over many other variations on the NP-bridging ligands were synthesized. Almost all copper complexes were confirmed via single crystal X-ray diffraction analysis. Besides theoretical TDDFT-studies of the electronic properties and photophysical measurements, the majority of the phosphino-modified Cu(I) complexes was tested in solution-processed organic light-emitting diodes (OLEDs) with different heterostructure variations. The best results of the OLED devices were obtained with copper emitter Cu-1b-H in a stack architecture of ITO/PEDOT-PSS (50 nm)/poly-TPD (15 nm)/20 wt % Cu(I) emitter:CBP:TcTA(7:3) (45 nm)/TPBi (30 nm)/LiF(1 nm)/Al (>100 nm) with a high brightness of 5900 Cd/m² and a good current efficiency of 3.79 Cd/A.

Keep it tight: a crucial role of bridging phosphine ligands in the design and optical properties of multinuclear coinage metal complexes

Copper subgroup metal ions in the +1 oxidation state are classical candidates for aggregation via non-covalent metal-metal interactions, which are supported by a number of bridging ligands. The bridging phosphines, soft donors with a relatively labile coordination to coinage metals, serve as convenient and essential components of the ligand environment that allow for efficient self-assembly of discrete polynuclear aggregates. Simultaneously, accessible and rich modification of the organic spacer of such P-donors has been used to generate many fascinating structures with attractive photoluminescent behavior. In this work we consider the development of di- and polynuclear complexes of M(i) (M = Cu, Ag, Au) and their photophysical properties, focusing on the effect of phosphine bridging ligands, their flexibility and denticity.

Transient FTIR spectroscopy after one- and two-colour excitation on a highly luminescent chromium(III) complex

The development of photoactive transition metal complexes with Earth-abundant metals is a rapidly growing research field, where a deeper understanding of the underlying photophysical processes is of great importance. A multitude of potential applications in the fields of photosensitizing, optical sensing, photoluminescence and photoredox catalysis motivates demanding spectroscopic studies. We applied a series of high-level spectroscopic methods on the previously reported highly luminescent chromium(iii) complex [Cr(ddpd)2](BF4)3 (ddpd = N,N'-dimethyl-N,N'-dipyridine-2-ylpyridine-2,6-diamine) possessing two near-IR emissive doublet states with microsecond lifetimes. Luminescence measurements were performed at temperatures down to about 10 K, showing a remarkable rise of the integrated emission intensity by more than a factor of three. The emissive doublet states were structurally characterized by transient FTIR spectroscopy at 290 K and 20 K, supplemented by ground state FTIR and Raman spectroscopy in combination with density functional theory. According to emission and step-scan FT-IR spectroscopy, the stronger luminescence at lower temperature arises from decreased non-radiative decay via energy transfer to CH vibrational overtones and increased radiative decay based on lowered symmetry. Pump/pump/probe (FTIR) and pump/dump/probe (FTIR) schemes were developed to modulate the excited doublet state populations at 290 and 20 K as a function of specific near-IR pump vs. dump wavelengths. The effect of the second near-IR pulse can be explained by combinations of excited state absorption, ground state absorption and stimulated emission. The successful establishment of these two-colour step-scan FTIR experiments is an important step towards profound studies on further transition metal complexes with energetically close-lying excited states in the near future.

Structural Characterization and Lifetimes of Triple-Stranded Helical Coinage Metal Complexes: Synthesis, Spectroscopy and Quantum Chemical Calculations

This work reports on a series of polynuclear complexes containing a trinuclear Cu, Ag, or Au core in combination with the fac-isomer of the metalloligand [Ru(pypzH)3 ](PF6 )2 (pypzH=3-(pyridin-2-yl)pyrazole). These (in case of the Ag and Au containing species) newly synthesized compounds of the general formula [{Ru(pypz)3 }2 M3 ](PF6 ) (2: M=Cu; 3: M=Ag; 4: M=Au) contain triple-stranded helical structures in which two ruthenium moieties are connected by three N-M-N (M=Cu, Ag, Au) bridges. In order to obtain a detailed description of the structure both in the electronic ground and excited states, extensive spectroscopic and quantum chemical calculations are applied. The equilateral coinage metal core triangle in the electronic ground state of 2-4 is distorted in the triplet state. Furthermore, the analyses offer a detailed description of electronic excitations. By using time-resolved IR spectroscopy from the microsecond down to the nanosecond regime, both the vibrational spectra and the lifetime of the lowest lying electronically excited triplet state can be determined. The lifetimes of these almost only non-radiative triplet states of 2-4 show an unusual effect in a way that the Au-containing complex 4 has a lifetime which is by more than a factor of five longer than in case of the Cu complex 2. Thus, the coinage metals have a significant effect on the electronically excited state, which is localized on a pypz ligand coordinated to the Ru atom indicating an unusual cooperative effect between two moieties of the complex.