Challenges and opportunities for adsorption-based CO2 capture from natural gas combined cycle emissions

Understanding 2p core-level excitons of late transition metals by analysis of mixed-valence copper in a metal-organic framework

The L2,3-edge X-ray absorption spectra of late transition metals such as Cu, Ag, and Au exhibit absorption onsets lower in energy for higher oxidation states, which is at odds with the measured spectra of earlier transition metals. Time-dependent density functional theory calculations for Cu2+/Cu+ reveal a larger 2p core-exciton binding energy for Cu2+, overshadowing shifts in single-particle excitation energies with respect to Cu+. We explore this phenomenon in a Cu+ metal-organic framework with ∼12% Cu2+ defects and find that corrections with self-consistent excited-state total energy differences provide accurate XAS peak alignment.

Two-Dimensional Nanoporous Cross-linked Polymer Networks as Emerging Candidates for Gas Adsorption

This paper illustrates the gas adsorption properties of newly synthesized nanoporous cross-linked polymer networks (CPNs). All synthesized CPNs possess N-rich functional groups and are used for the utilization of carbon dioxide and methane. Good gas adsorption and selectivities are obtained for all of the samples. Among the materials, HEREON2 outperforms better selectivity for methane separation from nitrogen rather than zeolites, activated carbons, molecular sieves, covalent organic frameworks, and metal-organic frameworks (MOFs). The accessibility of the N-rich functionalities makes these materials potential candidates for the separation of hydrocarbons via increased polarizabilities. High-pressure adsorption experiments showed that the synthesized two-dimensional nanoporous materials also have a high affinity toward carbon dioxide. HEREON2 powders showed an increased experimental CO2/N2 selectivity of ∼25,000 at 50 bar due to the presence of nitrogen groups in the structure. Fourier-transform infrared spectroscopy (FTIR), solid-state NMR, X-ray diffraction, thermogravimetric analysis, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were applied for the characterization of the synthesized nanoporous CPNs. The results show a potential new pathway for future CPN membrane development.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Nanocatalysis MoS2/rGO: An Efficient Electrocatalyst for the Hydrogen Evolution Reaction

In this study, a systematic investigation of MoS2 nanostructure growth on a SiO2 substrate was conducted using a two-stage process. Initially, a thin layer of Mo was grown through sputtering, followed by a sulfurization process employing the CVD technique. This two-stage process enables the control of diverse nanostructure formations of both MoS2 and MoO3 on SiO2 substrates, as well as the formation of bulk-like grain structures. Subsequently, the addition of reduced graphene oxide (rGO) was examined, resulting in MoS2/rGO(n), where graphene is uniformly deposited on the surface, exposing a higher number of active sites at the edges and consequently enhancing electroactivity in the HER. The influence of the synthesis time on the treated MoS2 and also MoS2/rGO(n) samples is evident in their excellent electrocatalytic performance with a low overpotential.

Applying feature selection and machine learning techniques to estimate the biomass higher heating value

The biomass higher heating value (HHV) is an important thermal property that determines the amount of recoverable energy from agriculture byproducts. Precise laboratory measurement or accurate prediction of the HHV is essential for designing biomass conversion equipment. The current study combines feature selection scenarios and machine learning tools to establish a general model for estimating biomass HHV. Multiple linear regression and Pearson's correlation coefficients justified that volatile matter, nitrogen, and oxygen content of biomass samples have a slight effect on the HHV and it is better to ignore them during the HHV modeling. Then, the prediction performance of random forest, multilayer and cascade feedforward neural networks, group method of data handling, and least-squares support vector regressor are compared to determine the intelligent estimator with the highest accuracy toward biomass HHV prediction. The ranking test shows that the multilayer perceptron neural network better predicts the HHV of 532 biomass samples than the other intelligent models. This model presents the outstanding absolute average relative error of 2.75% and 3.12% and regression coefficients of 0.9500 and 0.9418 in the learning and testing stages. The model performance is also superior to a recurrent neural network which was recently developed in the literature using the same databank.

Polymers of Intrinsic Microporosity Based on Dibenzodioxin Linkage: Design, Synthesis, Properties, and Applications

The development of polymers of intrinsic microporosity (PIMs) over the last two decades has established them as a distinct class of microporous materials, which combine the attributes of microporous solid materials and the soluble nature of glassy polymers. Due to their solubility in common organic solvents, PIMs are easily processable materials that potentially find application in membrane-based separation, catalysis, ion separation in electrochemical energy storage devices, sensing, etc. Dibenzodioxin linkage, Tröger's base, and imide bond-forming reactions have widely been utilized for synthesis of a large number of PIMs. Among these linkages, however, most of the studies have been based on dibenzodioxin-based PIMs. Therefore, this review focuses precisely on dibenzodioxin linkage chemistry. Herein, the design principles of different rigid and contorted monomer scaffolds are discussed, as well as synthetic strategies of the polymers through dibenzodioxin-forming reactions including copolymerization and postsynthetic modifications, their characteristic properties and potential applications studied so far. Towards the end, the prospects of these materials are examined with respect to their utility in industrial purposes. Further, the structure-property correlation of dibenzodioxin PIMs is analyzed, which is essential for tailored synthesis and tunable properties of these PIMs and their molecular level engineering for enhanced performances making these materials suitable for commercial usage.

Direct Air Capture and Integrated Conversion of Carbon Dioxide into Cyclic Carbonates with Basic Organic Salts

Direct air capture and integrated conversion is a very attractive strategy to reduce CO₂ concentration in the atmosphere. However, the existing capturing processes are technologically challenging due to the costs of the processes and the low concentration of CO₂. The efficient valorization of the CO₂ captured could help overcome many techno-economic limitations. Here, we present a novel economical methodology for direct air capture and conversion that is able to efficiently convert CO₂ from the air into cyclic carbonates. The new approach employs commercially available basic ionic liquids, works without the need for sophisticated and expensive co-catalysts or sorbents and under mild reaction conditions. The CO₂ from atmospheric air was efficiently captured by IL solution (0.98 molCO₂/mol_IL) and, subsequently, completely converted into cyclic carbonates using epoxides or halohydrins potentially derived from biomass as substrates. A mechanism of conversion was evaluated, which helped to identify relevant reaction intermediates based on halohydrins, and consequently, a 100% selectivity was obtained using the new methodology.

Modeling the CO2 separation capability of poly(4-methyl-1-pentane) membrane modified with different nanoparticles by artificial neural networks

Membranes are a potential technology to reduce energy consumption as well as environmental challenges considering the separation processes. A new class of this technology, namely mixed matrix membrane (MMM) can be fabricated by dispersing solid substances in a polymeric medium. In this way, the poly(4-methyl-1-pentene)-based MMMs have attracted great attention to capturing carbon dioxide (CO2), which is an environmental pollutant with a greenhouse effect. The CO2 permeability in different MMMs constituted of poly(4-methyl-1-pentene) (PMP) and nanoparticles was comprehensively analyzed from the experimental point of view. In addition, a straightforward mathematical model is necessary to compute the CO2 permeability before constructing the related PMP-based separation process. Hence, the current study employs multilayer perceptron artificial neural networks (MLP-ANN) to relate the CO2 permeability in PMP/nanoparticle MMMs to the membrane composition (additive type and dose) and pressure. Accordingly, the effect of these independent variables on CO2 permeability in PMP-based membranes is explored using multiple linear regression analysis. It was figured out that the CO2 permeability has a direct relationship with all independent variables, while the nanoparticle dose is the strongest one. The MLP-ANN structural features have efficiently demonstrated an appealing potential to achieve the highest accurate prediction for CO2 permeability. A two-layer MLP-ANN with the 3-8-1 topology trained by the Bayesian regulation algorithm is identified as the best model for the considered problem. This model simulates 112 experimentally measured CO2 permeability in PMP/ZnO, PMP/Al2O3, PMP/TiO2, and PMP/TiO2-NT with an excellent absolute average relative deviation (AARD) of lower than 5.5%, mean absolute error (MAE) of 6.87 and correlation coefficient (R) of higher than 0.99470. It was found that the mixed matrix membrane constituted of PMP and TiO2-NT (functionalized nanotube with titanium dioxide) is the best medium for CO2 separation.

Airborne Toluene Detection Using Metal-Organic Frameworks

The pollution of indoor air is a major worldwide concern in our modern society for people's comfort, health, and safety. In particular, toluene, present in many substances including paints, thinners, candles, leathers, cosmetics, inks, and glues, affects the human health even at very low concentrations throughout its action on the central nervous system. Its prevalence in many workplace environments can fluctuate considerably, which led to firm regulation with exposure limits varying between 50 and 400 ppm depending on exposure time. This therefore requires the development of technologies for an accurate detection of this contaminant. Metal-organic frameworks have been proposed as promising candidates to detect and monitor a series of molecules at even extremely low concentrations owing to the high tunability of their functionality. Herein, a high-throughput Monte Carlo screening approach was devised to identify the best MOFs from the computation-ready, experimental (CoRE) metal-organic framework (MOF) density-derived electrostatic and chemical (DDEC) database for the selective capture of toluene from air at room temperature, with the consideration of a ternary mixture composed of extremely low-level concentration of toluene (10 ppm) in oxygen and nitrogen to mimic the composition of air. An aluminum MOF, DUT-4, with channel-like micropores was identified as an excellent candidate for the selective adsorption of toluene from air with a predicted adsorption uptake of 0.5 g/g at 10 ppm concentration and room temperature. The toluene adsorption behavior of DUT-4 at low equivalent concentrations, alongside its sensing performance, was further experimentally investigated by its incorporation in a quartz crystal microbalance sensor, confirming the promises of DUT-4. Decisively, the resulting high sensitivity and fast kinetics of our developed sensor highlight the applicability of this hand-in-hand computational-experimental methodology to porous material screening for sensing applications.

Turning Waste into Wealth: Sustainable Production of High-Value-Added Chemicals from Catalytic Coupling of Carbon Dioxide and Nitrogenous Small Molecules

Carbon neutrality is one of the central topics of not only the scientific community but also the majority of human society. The development of highly efficient carbon dioxide (CO₂) capture and utilization (CCU) techniques is expected to stimulate routes and concepts to go beyond fossil fuels and provide more economic benefits for a carbon-neutral economy. While various single-carbon (C₁) and multi-carbon (C₂₊) products have been selectively produced to date, the scope of CCU can be further expanded to more valuable chemicals beyond simple carbon species by integration of nitrogenous reactants into CO₂ reduction. In this Review, research progress toward sustainable production of high-value-added chemicals (urea, methylamine, ethylamine, formamide, acetamide, and glycine) from catalytic coupling of CO₂ and nitrogenous small molecules (NH₃, N₂, NO₃^-, and NO₂^-) is highlighted. C-N bond formation is a key mechanistic step in N-integrated CO₂ reduction, so we focus on the possible pathways of C-N coupling starting from the CO₂ reduction and nitrogenous small molecules reduction processes as well as the catalytic attributes that enable the C-N coupling. We also propose research directions and prospects in the field, aiming to inspire future investigations and achieve comprehensive improvement of the performance and product scope of C-N coupling systems.

Robust model-based control of a packed absorption column for the natural gas sweetening process

The sweetening units are the most important in natural gas processing. Packed bed absorption columns are widely used in the sweetening process; however, their operation and control are not simple due to their highly non-linear behavior derived from their distributed nature and interaction between multiple physical phenomena. In this work, two robust model-based control schemes are implemented to regulate the CO2 concentration at the outlet of a packed bed absorption column in the gas sweetening process. The model of an industrial-scale absorption column and the structure of the controllers, i) control based on modeling error compensation (MEC) ideas, and ii) nonlinear model predictive control (NMPC) are described. Numerical results show that the proposed robust model-based controllers can regulate the controlled variable to the desired reference despite external disturbances, set-point changes, and uncertainties in the absorption column model.

Aluminum formate, Al(HCOO)3: An earth-abundant, scalable, and highly selective material for CO2 capture

A combination of gas adsorption and gas breakthrough measurements show that the metal-organic framework, Al(HCOO)3 (ALF), which can be made inexpensively from commodity chemicals, exhibits excellent CO2 adsorption capacities and outstanding CO2/N2 selectivity that enable it to remove CO2 from dried CO2-containing gas streams at elevated temperatures (323 kelvin). Notably, ALF is scalable, readily pelletized, stable to SO2 and NO, and simple to regenerate. Density functional theory calculations and in situ neutron diffraction studies reveal that the preferential adsorption of CO2 is a size-selective separation that depends on the subtle difference between the kinetic diameters of CO2 and N2. The findings are supported by additional measurements, including Fourier transform infrared spectroscopy, thermogravimetric analysis, and variable temperature powder and single-crystal x-ray diffraction.

Energy-Efficient Biphasic Solvents for Industrial Carbon Capture: Role of Physical Solvents on CO2 Absorption and Phase Splitting

Physical solvent is a promising alternative for the phase splitting of solvent to drastically reduce the regeneration energy during CO₂ capture. Here, an aqueous biphasic solvent, optimally composed of 30 wt % polyamine (N, N-dimethylpropylamine, DMPA) and 50 wt % physical solvent (polyethyleneglycol dimethyl ether, NHD), is prepared, which presents high cyclic loading, low regeneration energy, and good stability. L₁₆(4⁵) orthogonal tests are performed to comprehensively evaluate the mass-transfer kinetics and the effect of crucial conditions, verifying the weak effect of NHD solvent on mass transfer. The solvent effect of NHD could decrease the energy barrier of carbamate generation from zwitterions (DMPA⁺COO^-) to enhance chemical absorption. The low polarity of the NHD solvent provides source motivation and accelerates phase splitting. Time-space resolution distribution of CO₂ capacity is established based on a scale-up separator with 5 L solvent, which supports multiscale force analysis for the various stages during phase splitting. The drag force of the homogeneous cluster was first introduced into separation dynamics, referred to as an important reason for the various splitting behaviors of a scale-up separator.

Prospects for Simultaneously Capturing Carbon Dioxide and Harvesting Water from Air

Mitigation of anthropogenic climate change is expected to require large-scale deployment of carbon dioxide removal strategies. Prominent among these strategies is direct air capture with sequestration (DACS), which encompasses the removal and long-term storage of atmospheric CO₂  by purely engineered means. Because it does not require arable land or copious amounts of freshwater, DACS is already attractive in the context of sustainable development, but opportunities to improve its sustainability still exist. Leveraging differences in the chemistry of CO₂  and water adsorption within porous solids, here, the prospect of simultaneously removing water alongside CO₂  in direct air capture operations is investigated. In many cases, the co-adsorbed water can be desorbed separately from chemisorbed CO₂  molecules, enabling efficient harvesting of water from air. Depending upon the material employed and process conditions, the desorbed water can be of sufficiently high purity for industrial, agricultural, or potable use and can thus improve regional water security. Additionally, the recovered water can offset a portion of the costs associated with DACS. In this Perspective, molecular- and process-level insights are combined to identify routes toward realizing this nascent yet enticing concept.

Carbon Dioxide Capture at Nucleophilic Hydroxide Sites in Oxidation-Resistant Cyclodextrin-Based Metal-Organic Frameworks

Carbon capture and sequestration (CCS) from industrial point sources and direct air capture are necessary to combat global climate change. A particular challenge faced by amine-based sorbents-the current leading technology-is poor stability towards O₂ . Here, we demonstrate that CO₂ chemisorption in γ-cylodextrin-based metal-organic frameworks (CD-MOFs) occurs via HCO₃ ^- formation at nucleophilic OH^- sites within the framework pores, rather than via previously proposed pathways. The new framework KHCO₃ CD-MOF possesses rapid and high-capacity CO₂ uptake, good thermal, oxidative, and cycling stabilities, and selective CO₂ capture under mixed gas conditions. Because of its low cost and performance under realistic conditions, KHCO₃ CD-MOF is a promising new platform for CCS. More broadly, our work demonstrates that the encapsulation of reactive OH^- sites within a porous framework represents a potentially general strategy for the design of oxidation-resistant adsorbents for CO₂ capture.

CO2 /N2 Separation on Highly Selective Carbon Nanofibers Investigated by Dynamic Gas Adsorption

The development of highly selective adsorbents for CO₂ is a key part to advance separation by adsorption as a viable technique for CO₂ capture. In this work, polyacrylonitrile (PAN) based carbon nanofibers (CNFs) were investigated for their CO₂ separation capabilities using dynamic gas adsorption. The CNFs were prepared by electrospinning and subsequent carbonization at various temperatures ranging from 600 to 1000 °C. A thorough investigation of the CO₂ /N₂ selectivity resulted in measured values of 53-106 at 1 bar and 25 °C on CNFs carbonized at 600, 700, or 800 °C. Moreover, the selectivity increased with lower measurement temperatures and lower CO₂ partial pressures, reaching values up to 194. Further analysis revealed high long-term stability with no degradation over 300 cycles and fast adsorption kinetics for CNFs carbonized at 600 or 700 °C. These excellent properties make PAN-based CNFs carbonized at 600 or 700 °C promising candidates for the capture of CO₂ .

Functionalization of Diamine-Appended MOF-Based Adsorbents by Ring Opening of Epoxide: Long-Term Stability and CO2 Recyclability under Humid Conditions

Although diamine-appended metal-organic framework (MOF) adsorbents exhibit excellent CO₂ adsorption performance, a continuous decrease in long-term capacity during repeated wet cycles remains a formidable challenge for practical applications. Herein, we present the fabrication of diamine-appended Mg₂(dobpdc)-alumina beads (een-MOF/Al-Si-Cx; een = N-ethylethylenediamine; x = number of carbon atoms attached to epoxide) coated with hydrophobic silanes and alkyl epoxides. The reaction of epoxides with diamines in the portal of the pore afforded sufficient hydrophobicity, hindered the penetration of water vapor into the pores, and rendered the modified diamines less volatile. een-MOF/Al-Si-C17-200 (een-MOF/Al-Si-C17-y; y = 50, 100, and 200, denoting wt % of C17 with respect to the bead, respectively), with substantial hydrophobicity, showed a significant uptake of 2.82 mmol g^-1 at 40 °C and 15% CO₂, relevant to flue gas concentration, and a reduced water adsorption. The modified beads maintained a high CO₂ capacity for over 100 temperature-swing adsorption cycles in the presence of 5% H₂O and retained CO₂ separation performance in breakthrough tests under humid conditions. This result demonstrates that the epoxide coating provides a facile and effective method for developing promising adsorbents with high CO₂ adsorption capacity and long-term durability, which is a required property for postcombustion applications.

Incorporating Carbon Nanotubes in Nanocomposite Mixed-Matrix Membranes for Gas Separation: A Review

Carbon nanotube (CNT) is a prominent material for gas separation due to its inherent smoothness of walls, allowing rapid transport of gases compared to other inorganic fillers. It also possesses high mechanical strength, enabling membranes to operate at high pressure. Although it has superior properties compared to other inorganic fillers, preparation of CNTs into a polymer matrix remains challenging due to the strong van der Waals forces of CNTs, which lead to agglomeration of CNTs. To utilize the full potential of CNTs, proper dispersion of CNTs must be addressed. In this paper, methods to improve the dispersion of CNTs using functionalization methods were discussed. Fabrication techniques for CNT mixed-matrix membrane (MMM) nanocomposites and their impact on gas separation performance were compared. This paper also reviewed the applications and potential of CNT MMMs in gas separation.

Prospects of Biochar for Sustainable Agriculture and Carbon Sequestration: An Overview for Eastern Himalayas

The net arable land area is declining worldwide rapidly due to soil erosion, drought, loss of soil organic carbon, and other forms of degradation. Intense rainfall, cultivation along steep slopes, unscientific land-use changes, shifting cultivation, soil acidity, and nutrient mining in hills and mountains make agriculture unsustainable and less profitable. Hills and mountain ecosystems of the Eastern Himalayan Region (EHR) are further prone to the impact of climate change posing a serious threat to agricultural production and the environment. Increasing soil carbon reserves contributes to multiple ecosystem services, improves soil nutrient and water-holding capacities, and advances climate-resilient agriculture. Thus, carbon sequestration is increasingly becoming an important aspect of farming among researchers in the region. The EHR predominantly practices shifting cultivation that degrades the ecosystem and promotes land degradation and biodiversity loss. Leaching of exchangeable bases is highly favored due to excess rainfall which in turn creates an acidic soil accounting for >84% of the region. Application of lime to raise the soil acidity for the cultivation of crops did not get adequate acceptance among the farming community due to multiple issues such as cost involvement, non-availability in time and place, and transportation issues. The application of biochar as soil amendments is widely known to improve soil’s physical, chemical, and biological properties. Biochar has also emerged as a potential candidate for long-term carbon sequestration due to its inbuilt structure and higher stability. Shift from traditional “slash and burn” culture to “slash and char” might lead to the sequestration of carbon from the atmosphere. Around 0.21 Pg of carbon (12% of the total anthropogenic carbon emissions by land-use change) can be sequestered in the soil if the traditional “slash and burnt” practice is converted to “slash and char”. The objective of this review is to provide detailed information about the role of biochar in altering the soil properties for sustaining agriculture and carbon sequestration, especially for hills and mountain ecosystems.

Diamine Functionalization of a Metal-Organic Framework by Exploiting Solvent Polarity for Enhanced CO2 Adsorption

Diamine-appended metal-organic frameworks (MOFs) exhibit exceptional CO₂ adsorption capacities over a wide pressure range because of the strong interaction between basic amine groups and acidic CO₂. Given that their high CO₂ working capacity is governed by solvent used during amine functionalization, a systematic investigation on solvent effect is essential but not yet demonstrated. Herein, we report a facile one-step solvent exchange route for the diamine functionalization of MOFs with open metal sites, using an efficient method to maximize diamine loading. We employed an MOF, Mg₂(dobpdc) (dobpdc^4- = 4,4'-dioxido-3,3'-biphenyldicarboxylate), which contains high-density open metal sites. Indirect grafting with N-ethylethylenediamine (een) was performed with a minimal amount of methanol (MeOH) via multiple MeOH exchanges and diamine functionalization, resulting in a top-tier CO₂ adsorption capacity of 16.5 wt %. We established the correlation between N,N-dimethylformamide (DMF) loading and infrared peaks, which provides a simple method for determining the amount of the remaining DMF in Mg₂(dobpdc). All interactions among Mg, DMF, diamine, and solvent were analyzed by van der Waals (vdw)-corrected density functional theory (DFT) calculations to elucidate the effect of chemical potential on diamine grafting.

Porous materials for carbon dioxide separations

Global investment in counteracting climate change has galvanized increasing interest in carbon capture and sequestration (CCS) as a versatile emissions mitigation technology. As decarbonization efforts accelerate, CCS can target the emissions of large point-source emitters, such as coal- or natural gas-fired power plants, while also supporting the production of renewable or low-carbon fuels. Furthermore, CCS can enable decarbonization of difficult-to-abate industrial processes and can support net CO₂ removal from the atmosphere through bioenergy coupled with CCS or direct air capture. Here we review the development of porous materials as next-generation sorbents for CO₂ capture applications. We focus on stream- and sector-specific challenges while highlighting case studies within the context of the rapidly shifting energy landscape. We conclude with a discussion of key needs from the materials community to expand deployment of carbon capture technologies.

Deep CCS: Moving Beyond 90% Carbon Dioxide Capture

The large-scale deployment of carbon capture technologies is expected to play a crucial role in efforts to meet stringent climate targets set forth by the Paris Agreement, but current models rely heavily upon carbon dioxide removal (CDR) strategies for which viability at the gigatonne scale is uncertain. While most 1.5 and 2 °C scenarios project rapid decarbonization of the energy sector facilitated by carbon capture and sequestration (CCS), they generally assume that CCS units can only capture ∼90% of the CO₂ in coal and natural gas combustion flues because this was previously considered the optimal condition for aqueous amine scrubbers. In this Perspective, we discuss a small but growing body of literature that examines the prospect of moving significantly beyond 90% capture-a concept we term deep CCS-in light of recent developments in materials and process design. The low incremental costs associated with performing varying degrees of deep CCS suggest that this approach is not only feasible but may also alleviate burdens placed upon CDR techniques facing significant barriers to large-scale deployment. We estimate that rapid deployment of deep CCS in deep decarbonization pathways could avoid more than 1 gigatonne of CO₂ globally each year. The principles of deep CCS could also be applied directly to the CDR strategy of employing bioenergy with CCS, which could lead to a significant alleviation of the land and freshwater burden associated with this technology.

Roles of London Dispersive and Polar Components of Nano-Metal-Coated Activated Carbons for Improving Carbon Dioxide Uptake

Adsorption using carbonaceous materials has been considered as the prevailing technology for CO2 capture because it offers advantages such as high adsorption capacity, durability, and economic benefits. Activated carbon (AC) has been widely used as an adsorbent for CO2 capture. We investigated CO2 adsorption behaviors of magnesium oxide-coated AC (MgO-AC) as a function of MgO content. The microstructure and textural properties of MgO-AC were characterized by X-ray diffraction and nitrogen adsorption–desorption isotherms at 77 K, respectively. The CO2 adsorption behaviors of MgO-AC were evaluated at 298 K and 1 atm. Our experimental results revealed that the presence of MgO plays a key role in increasing the CO2 uptake through the interaction between an acidic adsorbate (e+) and an efficient basic adsorbent (e−).

Understanding Correlation Between CO2 Insertion Mechanism and Chain Length of Diamine in Metal-Organic Framework Adsorbents

Although CO₂ insertion is a predominant phenomenon in diamine-functionalized Mg₂ (dobpdc) (dobpdc^4- =4,4-dioxidobiphenyl-3,3'-dicarboxylate) adsorbents, a high-performance metal-organic framework for capturing CO₂ , the fundamental function of the diamine carbon chain length in the mechanism remains unclear. Here, Mg₂ (dobpdc) systems with open metal sites grafted by primary diamines NH₂ -(CH₂ )_n -NH₂ were developed, with en (n=2), pn (n=3), bn (n=4), pen (n=5), hn (n=6), and on (n=8). Based on CO₂ adsorption and IR results, CO₂ insertion is involved in frameworks with n=2 and 3 but not in systems with n≥5. According to NMR data, bn-appended Mg₂ (dobpdc) exhibited three different chemical environments of carbamate units, attributed to different relative conformations of carbon chains upon CO₂ insertion, as validated by first-principles density functional theory (DFT) calculations. For 1-hn and 1-on, DFT calculations indicated that diamine inter-coordinated open metal sites in adjacent chains bridged by carboxylates and phenoxides of dobpdc^4- . Computed CO₂ binding enthalpies for CO₂ insertion (-27.8 kJ mol^-1 for 1-hn and -20.2 kJ mol^-1 for 1-on) were comparable to those for CO₂ physisorption (-19.3 kJ mol^-1 for 1-hn and -20.8 kJ mol^-1 for 1-on). This suggests that CO₂ insertion is likely to compete with CO₂ physisorption on diamines of the framework when n≥5.

MWCNT Decorated Rich N-Doped Porous Carbon with Tunable Porosity for CO2 Capture

Designing of porous carbon system for CO2 uptake has attracted a plenty of interest due to the ever-increasing concerns about climate change and global warming. Herein, a novel N rich porous carbon is prepared by in-situ chemical oxidation polyaniline (PANI) on a surface of multi-walled carbon nanotubes (MWCNTs), and then activated with KOH. The porosity of such carbon materials can be tuned by rational introduction of MWCNTs, adjusting the amount of KOH, and controlling the pyrolysis temperature. The obtained M/P-0.1-600-2 adsorbent possesses a high surface area of 1017 m2 g-1 and a high N content of 3.11 at%. Such M/P-0.1-600-2 adsorbent delivers an enhanced CO2 capture capability of 2.63 mmol g-1 at 298.15 K and five bars, which is 14 times higher than that of pristine MWCNTs (0.18 mmol g-1). In addition, such M/P-0.1-600-2 adsorbent performs with a good stability, with almost no decay in a successive five adsorption-desorption cycles.

Biogas Upgrading via Cyclic CO2 Adsorption: Application of Highly Regenerable PEI@nano-Al2O3 Adsorbents with Anti-Urea Properties

Solid amine adsorbents are among the most promising CO₂ adsorption technologies for biogas upgrading due to their high selectivity toward CO₂, low energy consumption, and easy regeneration. However, in most cases, these adsorbents undergo severe chemical inactivation due to urea formation when regenerated under a realistic CO₂ atmosphere. Herein, we demonstrated a facile and efficient synthesis route, involving the synthesis of nano-Al₂O₃ support derived from coal fly ash with a CO₂ flow as the precipitant and the preparation of polyethylenimine (PEI)-impregnated Al₂O₃-supported adsorbent. The optimal 55%PEI@2%Al₂O₃ adsorbent showed a high CO₂ uptake of 139 mg·g^-1 owing to the superior pore structure of synthesized nano-Al₂O₃ support and exhibited stable cyclic stability with a mere 0.29% decay per cycle even under the realistic regenerated CO₂ atmosphere. The stabilizing mechanism of PEI@nano-Al₂O₃ adsorbent was systematically demonstrated, namely, the cross-linking reaction between the amidogen of a PEI molecule and nano-Al₂O₃ support, owing to the abundant Lewis acid sites of nano-Al₂O₃. This cross-linking process promoted the conversion of primary amines into secondary amines in the PEI molecule and thus significantly enhanced the cyclic stability of PEI@nano-Al₂O₃ adsorbents by markedly inhibiting the formation of urea compounds. Therefore, this facile and efficient strategy for PEI@nano-Al₂O₃ adsorbents with anti-urea properties, which can avoid active amine content dilution from PEI chemical modification, is promising for practical biogas upgrading and various CO₂ separation processes.

Partial oxidation of methane to formaldehyde over copper–molybdenum complex oxide catalysts

The Cu₃Mo₂O₉ catalyst forms formaldehyde selectively in the methane oxidation with O₂ in the presence of water.

Power Market Formation for Clean Energy Production as the Prerequisite for the Country’s Energy Security

The paper analyzes the main issues of power market development for clean energy production within the broader framework of ensuring the country’s energy security. In addition, special attention is paid to the technologies aimed at reducing emissions of toxic substances and greenhouse gases by the fossil-fired power plants. Even though the future electricity markets would most likely depend on the high shares of renewable energy sources (RES) in the electricity system, energy efficiency such as the one based on the near-zero emission technologies might also play a crucial role in the transition to the carbon-free energy future. In particular, there are the oxy-fuel combustion technologies that might help to reduce the proportion of unburned fuel and increase the efficiency of the power plant while reducing the emissions of flue gases. Our paper focuses on the role and the place of the near-zero emission technologies in the production of clean energy. We applied economic and mathematical models for assessing the prospects for applying oxy-fuel combustion technology in thermal power plants, taking into account the system of emission quotas and changes in the fuel cost. Our results demonstrate that at the current fuel prices, it is advisable to use economical combined cycle gas turbines (CCGT). At the same time, when quotas for greenhouse gas emissions are introduced and fuel costs increase by 1.3 times, it becomes economically feasible to use the oxy-fuel combustion technology which possesses significant economic advantages over CCGT with respect to the capture and storage of greenhouse gases.

Fabrication and Performance Evaluation of Industrial Alumina Based Graded Ceramic Substrate for CO2 Selective Amino Silicate Membrane

The present study mainly focuses on the careful design of an amino-silicate membrane integrated on an asymmetric graded membrane substrate, comprised of a cost-effective macroporous industrial alumina based ceramic support with a systematic graded assemblage of sol-gel derived γ-alumina intermediate and silica-CTAB sublayer-based multilayered interface, specifically dedicated for the separation of CO₂ gas from the binary gas mixture (CO₂/N₂) under nearly identical flue gas atmospheric conditions. The tailor-made industrial α-alumina-based porous ceramic support has been characterized in terms of apparent porosity, bulk density, flexural strength, microstructural feature, pore size, and its distribution to demonstrate its application feasibility toward the evolution of the subsequent membrane structure. The near surface morphology of the subsequent intermediate and submembrane layer has been carefully controlled via precisely scheming the colloidal chemistry and consequently implementing it during the deposition process of the respective γ-alumina and silica-CTAB precursor sols, whereas the potentiality of the quarantined amine groups in the final amino-silicate membrane has been methodically optimized by the appropriate heat treatment process. Finally, the real-time applicability of the hybrid amino-silicate membrane has been evaluated in terms of systematic analysis of the binary gas (CO₂/N₂) separation performance under variable operating conditions. The investigated ceramic membrane exhibited optimum CO₂ permeance of 46.44 GPU with a CO₂/N₂ selectivity of 12.5 at 80 °C under a trans-membrane pressure drop of 0.8 bar having a feed and sweep side water flow rate of 0.03 mL/min, which shows its performance reliability at nearly identical flue gas operating conditions.

Cooperative carbon capture and steam regeneration with tetraamine-appended metal-organic frameworks

Natural gas has become the dominant source of electricity in the United States, and technologies capable of efficiently removing carbon dioxide (CO₂) from the flue emissions of natural gas-fired power plants could reduce their carbon intensity. However, given the low partial pressure of CO₂ in the flue stream, separation of CO₂ is particularly challenging. Taking inspiration from the crystal structures of diamine-appended metal-organic frameworks exhibiting two-step cooperative CO₂ adsorption, we report a family of robust tetraamine-functionalized frameworks that retain cooperativity, leading to the potential for exceptional efficiency in capturing CO₂ under the extreme conditions relevant to natural gas flue emissions. The ordered, multimetal coordination of the tetraamines imparts the materials with extraordinary stability to adsorption-desorption cycling with simulated humid flue gas and enables regeneration using low-temperature steam in lieu of costly pressure or temperature swings.

Accelerated Formation Kinetics of a Multicomponent Metal-Organic Framework Derived from Preferential Site Occupancy

Metal-organic frameworks (MOFs) are typically synthesized via solvothermal reactions, whose reaction kinetics might be a bottleneck in the scaled-up manufacturing of these materials. Herein, we show that asymmetric cationic site occupancy within a mixed-metal citrate-based MOF-KM₃(C₆H₄O₇)(C₆H₅O₇)·xH₂O (M = Co, Zn), also known as UTSA-16-can be exploited for improved formation kinetics. Using this strategy, mixed-metal UTSA-16 can be crystallized under significantly milder conditions relative to the parent Co-based one, paving the way for the mass production of this promising material.

Potential Link between Cu Surface and Selective CO2 Electroreduction: Perspective on Future Electrocatalyst Designs

Electrochemical reduction of carbon dioxide (CO₂ RR) product distribution has been identified to be dependent on various surface factors, including the Cu facet, morphology, chemical states, doping, etc., which can alter the binding strength of key intermediates such as *CO and *OCCO during reduction. Therefore, in-depth knowledge of the Cu catalyst surface and identification of the active species under reaction conditions aid in designing efficient Cu-based electrocatalysts. This progress report categorizes various Cu-based electrocatalysts into four main groups, namely metallic Cu, Cu alloys, Cu compounds (Cu + non-metal), and supported Cu-based catalysts (Cu supported by carbon, metal oxides, or polymers). The detailed mechanisms for the selective CO₂ RR are presented, followed by recent relevant developments on the synthetic procedures for preparing Cu and Cu-based nanoparticles. Herein, the potential link between the Cu surface and CO₂ RR performance is highlighted, especially in terms of the chemical states, but other significant factors such as defective sites and roughened morphology of catalysts are equally considered during the discussion of current studies of CO₂ RR with Cu-based electrocatalysts to fully understand the origin of the significant enhancement toward C₂ formation. This report concludes by providing suggestions for future designs of highly selective and stable Cu-based electrocatalysts for CO₂ RR.

Mixed Metal-Organic Framework with Multiple Binding Sites for Efficient C2 H2 /CO2 Separation

The separation of C2 H2 /CO2 is particularly challenging owing to their similarities in physical properties and molecular sizes. Reported here is a mixed metal-organic framework (M'MOF), [Fe(pyz)Ni(CN)4 ] (FeNi-M'MOF, pyz=pyrazine), with multiple functional sites and compact one-dimensional channels of about 4.0 Å for C2 H2 /CO2 separation. This MOF shows not only a remarkable volumetric C2 H2 uptake of 133 cm3  cm-3 , but also an excellent C2 H2 /CO2 selectivity of 24 under ambient conditions, resulting in the second highest C2 H2 -capture amount of 4.54 mol L-1 , thus outperforming most previous benchmark materials. The separation performance of this material is driven by π-π stacking and multiple intermolecular interactions between C2 H2 molecules and the binding sites of FeNi-M'MOF. This material can be facilely synthesized at room temperature and is water stable, highlighting FeNi-M'MOF as a promising material for C2 H2 /CO2 separation.

High-performance carbon dioxide capture and storage by multi-functional sphingosine kinase inhibitors through a CO2-philic membrane

Carbon dioxide (CO₂) capture using environmentally friendly sphingosine-based materials was theoretically studied.