Phosphotungstic Acid-Supported Hercynite: A Magnetic Nanocomposite Catalyst for the Selective Esterification of Chloroacetic Acid

This study presents the synthesis and characterization of a novel phosphotungstic acid-functionalized hercynite@SiO2 magnetic core-shell through a three-step procedure. The characterization involved various analyses including Fourier-transform infrared spectroscopy, P-XRD, TGA-DSC, EDAX, inductively coupled plasma optical emission spectroscopy, elemental mapping, scanning electron microscopy, transmission electron microscopy, and value stream mapping. The catalytic performance of the hercynite@SiO2-PTA nanomagnetic composite was examined in the esterification of chloroacetic acid. Results indicate that the developed procedure enables the production of chloroacetic acid esters using a wide range of primary, secondary, and tertiary aliphatic and aromatic alcohols with good to excellent yields and high selectivity. The significance of this work lies in its straightforward synthesis method, minimal time requirement, reduced utilization of hazardous chemicals, and cost-effectiveness. Additionally, the catalyst exhibited magnetic recyclability for up to five cycles with negligible loss in activity. Notably, the synthesized catalyst demonstrated nontoxicity and environmental friendliness.

Palladium doped PDA-coated hercynite as a highly efficient catalyst for mild hydrogenation of nitroareness

Hercynite magnetic nanoparticles were produced through the co-precipitation of ferrous and aluminum cations. The surface of hercynite was respectively coated with silica, 2,4,6-trichloro-1,3,5-triazine, and 1H-pyrazole-3,5-dicarboxylic acid to provide a suitable substrate for Pd(II) loading, furnishing Pd@Her-TCT-PDA. Subsequently, the introduced Pd(II) was reduced to Pd(0) using NaBH4. FT-IR, EDS, XRD, TGA, TEM and SEM images were the characteristic methods to prove the success of catalyst synthesis. The SEM image illustrated the particles with a nanosize of 25-50 nm and TEM image confirmed the presence of Pd nanoparticles with sizes lower than 2 nm. EDS elemental analysis of the catalyst proved the existence of Pd, Fe, and Al atoms along with the C, O, N, and Si atoms belong to the heterocyclic moieties. VSM analysis clarified a considerable drop in the magnetic properties of the hercynite core of the final catalyst due to its modified surface. TGA curve demonstrated that Pd@Her-TCT-PDA contains 20% organic content, attributed to the anchored heterocyclic ligands. Finally, Pd@Her-TCT-PDA was employed along with NaBH4 as a catalytic system to reduce completely the nitro group of aromatic compounds to their corresponding amines. The recyclability tests showed low drop in the catalytic activity of Pd@Her-TCT-PDA after third run with negligible leaching of Pd NPs.

A novel magnetic FSM-16 supported ionic liquid/Pd complex as a high performance and recyclable catalyst for the synthesis of pyrano[3,2-c]chromenes

In this work, Fe3O4@FSM-16/IL-Pd was successfully designed and synthesized via a new procedure of palladium(ii) complex immobilization onto magnetic FSM-16 using an ionic liquid, as a novel heterogeneous nanocatalyst. Multiple techniques were employed to characterize this magnetic nanocatalyst such as Fourier transform infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), Field Emission Scanning Electron Microscopy (FE-SEM), thermogravimetric analysis (TGA), Transmission electron microscopy (TEM), and Vibrating Sample Magnetometry (VSM). After complete characterization of the catalyst, its catalytic activity was used for the synthesis of pyrano[3,2-c]chromene-3-carbonitriles via the reaction of 4-hydroxycoumarin, aldehyde, and malononitrile under solvent-free conditions. Also, it can be recovered and reused several times without a significant decrease in its catalytic activity or palladium leaching.

Zn Complex on Tryptophan-Functionalized MCM-41 as an Efficient and Promising Reusable Nanocatalyst in One-Pot Three-Component Synthesis of Amino Benzyl Quinolinols and Naphthols via a Betti Reaction

In this research, a Zn transition metallic complex on functionalized mesopore silica MCM-41 has been designed and utilized as an effective, recoverable, and thermally stable heterogeneous nanocatalyst in the formation of the C-C bond. Also, the synthesis of amino benzyl quinolinols and amino benzyl naphthol derivatives was performed by the three-component reaction of Betti from aromatic aldehydes, type II amines, and 8-hydroxyquinoline and 1-naphthol in the presence of the MCM-41-tryptophan-Zn nanocatalyst under reflux conditions. The short reaction times, high efficiency of the products, the easy separation of catalysts due to their heterogeneity, and their reusability are the advantages of this method. Finally, the nature of catalysts was studied by using some techniques such as the Fourier transform infrared spectrum, energy-dispersive spectroscopy, hot filtration test, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, inductively coupled plasma optical emission spectrometry, and N₂ adsorption-desorption (BET). The synthesized heterogeneous catalysts showed perfect catalytic activity and also good recyclability in the Betti reaction. They could be reused at least for five consecutive cycles without significant loss of their catalytic activities.

SiO2-supported HClO4 catalyzed synthesis of (Z)-thiazolylhydrazonoindolin-2-ones and their electrochemical properties

In this paper, an environmentally benign silica-supported perchloric acid (HClO₄-SiO₂) catalyzed green FCDR strategy has been developed for the synthesis of (Z)-THIs (6) with high stereospecificity via an intramolecular hydrogen bond (IHB) directed approach, involving the reaction of methyl ketones (1), N-bromosuccinimide (NBS) (2), isatins (4) and thiosemicarbazide (5) in ethanol at reflux temperature for 45-60 min in one-pot. The reaction proceeds through the construction of C-Br (α-bromination), C-S & C-N (heterocyclization), and CN (condensation) bonds in one pot. The absolute structure of the compound (Z)-3-(2-(4-(4-bromophenyl)thiazol-2-yl)hydrazono)indolin-2-one (6e) has been confirmed by single-crystal XRD analysis. Further, the role of IHB on Z-configuration of the synthesized (Z)-THIs is proved by single-crystal XRD and ¹H NMR studies. Wide substrate scope, good functional group tolerance, scalability, improved safety since the method circumvents the use of highly lachrymatric α-bromoketones as starting materials, high product yields (up to 98%), short reaction times, reusable solid Brønsted acid catalyst (HClO₄-SiO₂), and products that do not require column chromatography purification are all attractive features of this FCDR strategy. Electrochemical properties of THIs (6) are examined by cyclic voltammetry. The HOMO and LUMO energy level of THIs, 6a, 6c, 6d, 6j, 6o-6v, 6y, and 6aa are comparable with the reported ambipolar materials, and the HOMO levels of other THIs, 6b, 6e-6i, 6n, 6w, 6x, 6z and 6 ab-6ae are similar with the most commonly used hole transporting materials (HTMs).

High-Power and High-Performance Catalyst for Suzuki Coupling Reaction

In this project, the aim was to carry out the Suzuki reaction using a new and unique catalyst with a base of Fe3O4 magnetic nanoparticles coated using a new ligand. In fact, this magnetic catalyst has an inhomogeneous surface to create a connection between the organic and aqueous phases so that the carbon–carbon coupling reaction is completely performed on its large surface. The structure of this catalyst uses two metals, nickel and cobalt, which are coated on a bed of amino linkers and propel the Suzuki coupling reaction at high speed on the catalyst surface. The products obtained are from ideal and optimal conditions with an efficiency of over 98%. The catalyst has a recovery power of over 96% and has enough power to perform several coupling reactions several times. Lastly, the magnetic nanocatalyst is easily separated from the reaction medium by an external field and has 100% power when performing other reactions.

Silica sulfuric acid coated on SnFe2O4 MNPs: synthesis, characterization and catalytic applications in the synthesis of polyhydroquinolines

An efficient and heterogeneous novel magnetic solid sulfuric acid, immobilized on silica functionalized SnFe₂O₄, was successfully synthesized, characterized, and employed as a novel recoverable nanocatalyst for the synthesis of biologically active polyhydroquinoline derivatives. The SnFe₂O₄@SiO₂-SO₃H was easily synthesized and confirmed using various spectroscopic techniques, including FT-IR, XRD, EDX, Map, TGA, SEM and TEM analyses. The catalytic behavior of the resulting catalyst system was investigated in the Hantzsch synthesis of polyhydroquinoline derivatives. The desired products were obtained with high conversions and excellent reusability.

Synthesis and characterization of novel hercynite@sulfuric acid and its catalytic applications in the synthesis of polyhydroquinolines and 2,3-dihydroquinazolin-4(1H)-ones

Herein, we report the synthesis of hercynite@sulfuric acid as a novel nanomagnetic solid acid catalyst, containing the sulfuric acid catalytic sites on the surface of hercynite MNPs as the catalytic support. The as-synthesized nanocomposite was meticulously characterized using a wide range of physicochemical techniques; including, FT-IR, XRD, EDX, X-ray-mapping, SEM and VSM analysis. The catalytic activity of this nanomagnetic material was considered for the synthesis of the diversely substituted polyhydroquinolines and 2,3-dihydroquinazolin-4(1H)-ones under solvent free conditions and also cyclocondensation reactions in ethanol, respectively affording good to excellent yields. Moreover, it is worth mentioning that the heterogeneity of the catalyst was measured through its excellent reusability and hot-filtration test.

Hercynite silica sulfuric acid: a novel inorganic sulfurous solid acid catalyst for one-pot cascade organic transformations

Herein, we delignated the synthesis of a novel inorganic sulfurous magnetic solid acid catalyst by the immobilization of an extremely high content of sulfuric acid functionalities on the amorphous silica-modified hercynite nanomagnetic core–shell via a simple method. Silica sulfuric acid (SSA) modified hercynite nanocomposite (hercynite@SSA) combines excellent recoverability and stability characteristics of hercynite (which can be regarded as a ferro spinel with Fd3m space group and cubic crystal structure) with the strong Brønsted acid properties of –SO₃H groups. This nanomagnetic solid acid was found to be an efficient and facile strong solid acid catalyst for the synthesis of bis(pyrazolyl)methanes via two different one-pot multicomponent methodologies under green conditions. The hercynite@SSA catalyst shows excellent catalytic activity and reusability in the ethanolic medium among different solid acid materials. A plausible reaction mechanism is proposed for this synthesis.

A novel inorganic sulfurous nanomagnetic solid acid composite was synthesized and its catalytic activity was evaluated in the synthesis of bis(pyrazolyl)methane derivatives. The catalyst displayed excellent activity and recoverability under green conditions.

A Green Synthesis Strategy of Binuclear Catalyst for the C-C Cross-Coupling Reactions in the Aqueous Medium: Hiyama and Suzuki-Miyaura Reactions as Case Studies

Cellulose, as a green and available phytochemical, was immobilized on the surface of magnetite nanoparticles then doped with imidazole and Co. complex (Fe3O4@CNF ∼ ImSBL ∼ Co.) and used as a water-dispersible, recyclable and efficient nano catalyst for the synthesis of C-C cross-coupling reactions including fluoride-free Hiyama and Suzuki reactions in an aqueous medium as an efficient and vital solvent, due to their high application and importance in various fields of science. Different spectroscopic and microscopic techniques were used for the catalyst characterization such XRD, FESEM, TEM, FT-IR, EDX, DLS, VSM, UV-Vis, and ICP analyses. The presence of imidazole as ionic section tags with hydrophilic character on the Co-complex supported on magnetic nanoparticles provides dispersion of the catalyst particles in water, which leads to both higher catalytic performance and also facile catalyst recovery and reuse six times by successive extraction and final magnetic separation. High catalytic activity was found for the catalyst and high to excellent efficiency was obtained for all Suzuki (80-98% yield; E factor: 1.1-1.9) and Hiyama (87-98% yield; E factor: 0.26-1.1) derivatives in short reaction times under mild reaction conditions in the absence of any hazardous or expensive materials. There is not any noticeable by-product found whether for Suzuki or Hiyama derivatives, which reflects the high selectivity and also the lower the E factor the more favorable is the process in view of green chemistry. The bi-aryls were achieved from the reaction of various aryl iodides/bromides and even chlorides as the highly challenging substrates, which are more available and cheaper, with triethoxyphenylsilane or phenylboronic acid. To prove the performance of the catalyst components (synergistic of SBL ∼ Co. and IL), its different homologs were incorporated individually and studied for a model reaction. Exclusively, this is an introductory statement on the use of Cobalt binuclear symmetric ionic liquid catalysts in Hiyama reactions.

A novel strategy for stabilization of sub-nanometric Pd colloids on kryptofix functionalized MCM-41: nanoengineered material for Stille coupling transformation

The stabilization of sub-nanometric metal particles (< 1 nm) with suitable distribution remained challenging in the catalytic arena. Herein, an intelligent strategy was described to anchoring and stabilizing sub-nanometric Pd colloids with an average size of 0.88 nm onto Kryptofix 23 functionalized MCM-41. Then, the catalytic activity of Pd@Kryf/MCM-41 was developed in Stille coupling reaction with a turnover frequency (TOF) value of 247 h-1. The findings demonstrate that porous MCM-41 structure and high-affinity Kryptofix 23 ligand toward adsorption of Pd colloids has a vital role in stabilizing the sub-nanometric particles and subsequent catalytic activity. Overall, these results suggest that Pd@Kryf/MCM-41 is a greener, more suitable option for large-scale applications and provides new insights into the stabilization of sub-nanometric metal particles.

Speciation study involving mononuclear binary transition metal (CoII, NiII and CuII) complexes of L-methionine in non-ionic micellar medium

The present work aims to evaluate the binding capacities of binary complexes of L-Methionine with transition metal ions Co^II, Ni^II and Cu^II in Triton X 100-water mixtures, a non-ionic micellar media of different compositions (0.0–2.5% (v/v)), investigated under the experimental conditions of 0.16 mol/dm³ ionic strength using NaNO₃ at a temperature of 303.0 ± 0.1 K Potentiometrically. The potentiometric data was assessed by Irving-Rossotti pH metric technique with the least-squares method of MINIQUAD75, a computer program. The selectivity of the best fit model obtained by continuous exhaustive chemical modelling studies and the accuracy of the results is assessed based on statistical parameters. MLH, ML and ML₂ are the identified species for the three M(Co^II, Ni^II and Cu^II) - Met systems. The shift in the equilibrium of binary metal-methionine complexes with variation in composition (0.0–2.5%) of the solvent can be explained by electrostatic together with non-electrostatic forces contributed by the interaction of solute with solvent.

Rare-Earth Incorporated Alloy Catalysts: Synthesis, Properties, and Applications

To improve the performance of metallic catalysts, alloying provides an efficient methodology to design state-of-the-art materials. As emerging functional materials, rare-earth metal compounds can integrate the unique orbital structure and catalytic behavior of rare earth elements into metallic materials. Such rare-earth containing alloy catalysts proffer an opportunity to tailor electronic properties, tune charged carrier transport, and synergize surface reactivity, which are expected to significantly improve the performance and stability of catalysis. Despite its significance, there are only few reviews on rare earth containing alloys or related topics. This review summarizes the composition, synthesis, and applications of rare earth containing alloys in the field of catalysis. Subsequent to comprehensively summarizing and constructively discussing the existing work, the challenges and possibilities of future research on rare-earth metal compound materials are evaluated.

Organosulfur, organoselenium, and organotellurium ligands in the development of palladium, nickel, and copper-based catalytic systems for Heck coupling

Organosulfur, organoselenium, and organotellurium ligands in designing Pd, Ni, and Cu-based homogeneous, heterogeneous, and nanocatalytic systems for Heck coupling.

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.