Ionic aggregation-induced emission dye with bulky counterions for preparation of bright near-infrared polymeric nanoparticles

Photophysics of fluorescent nanoparticles based on organic dyes - challenges and design principles

Fluorescent nanoparticles have become attractive for bioanalysis and imaging, due to their high brightness and photostability. Many different optical materials have been applied in fluorescent nanoparticles with a broad range of properties and characteristics. One appealing approach is the incorporation of molecular organic fluorophores in nanoparticles with the intention of transferring their known attractive solution-state properties directly to the nanoparticles. However, as molecular dyes are packed closely together in the nanoparticles their interactions most often result in fluorescence quenching and change in spectral properties making this approach challenging. In this perspective we will first discuss the origins of quenching and spectral shifts observed in dye based nanoparticles. On this background, we will then describe various designs of dye based NPs and how they address the challenges of dye-dye interactions and quenching. Our aim is to provide a general framework for understanding the supramolecular mechanisms that determine the photophysics of dye based nanoparticles. This framework of molecular photophysics and its relation to the internal structure of dye based nanoparticles can hopefully serve to assist rational design and optimization of new and improved dye based nanoparticles.

Polystyrene-Based Matrix to Enhance the Fluorescence of Aggregation-Induced Emission Luminogen for Fluorescence-Guided Surgery

Achieving ultrabright fluorogens is a key issue for fluorescence-guided surgery (FGS). Fluorogens with aggregation-induced emission (AIEgens) are potential agents for FGS on the benefit of the bright fluorescence in physiological conditions. Herein, the fluorescence brightness of AIEgen is further improved by preparing the nanoparticle using a polystyrene-based matrix and utilizing it for tumor FGS with a high signal-to-background ratio. After encapsulating AIEgen into polystyrene-poly (ethylene glycol) (PS-PEG), the fluorescence intensity of the prepared AIE@PS-PEG nanoparticles is multiple times that of nanoparticles in 1, 2-distearoyl-sn-glycero-3-phosphoethanolamine-poly (ethylene glycol) (DSPE-PEG), a commonly used polymer matrix for nanoparticle preparation. Molecular dynamics simulations suggest that higher free energy is required for the outer rings of AIEgen to rotate in polystyrene than in the DSPE, indicating that the benzene rings in polystyrene can restrict the intramolecular motions of AIEgen better than the alkyl chain in DSPE-PEG. Fluorescence correlation microscopy detections suggest that the triplet excited state of AIEgens is less in PS-PEG than in DSPE-PEG. The restricted intramolecular motions and suppressed triplet excited state result in ultrabright AIE@PS-PEG nanoparticles, which are more conducive to illuminating tumor tissues in the intestine for FGS. The illumination of metastatic tumors in lungs by AIE@PS-PEG nanoparticles is also tried.

Counterion influence on near-infrared-II heptamethine cyanine salts for photothermal therapy

Photothermal therapy (PTT) has attracted extensive attention in cancer treatment. Heptamethine cyanine dyes with near-infrared (NIR) absorption performance have been investigated for PTT. However, they are often accompanied by poor photostability, suboptimal photothermal conversion and limited therapeutic efficacy. The photophysical properties of fluorescent organic salts can be tuned through counterion pairing. However, whether the counterion can influence the photostability and photothermal properties of heptamethine cyanine salts has not been clarified. In this work, we investigated the effects of eleven counter anions on the physical and photothermal properties of NIR-II heptamethine cyanine salts with the same heptamethine cyanine cation. The anions have great impacts on the physiochemical properties of dyes in solution including aggregation, photostability and photothermal conversion efficiency. The physical tuning enables the control over the cytotoxicity and phototoxicity of the dyes. The selected salts have been demonstrated to significantly suppress 4T1 breast tumor growth with low toxicity. The findings that the counterion has great effects on the photothermal properties of cationic NIR-II heptamethine cyanine dyes will provide a reference for the preparation of improved photothermal agents through counterion pairing with possible translation to humans.

Precise Modulation of Intramolecular Aggregation-induced Electrochemiluminescence by Tetraphenylethylene-based Supramolecular Architectures

The precisely modulated synthesis of programmable light-emitting materials remains a challenge. To address this challenge, we construct four tetraphenylethylene-based supramolecular architectures (SA, SB, SC, and SD), revealing that they exhibit higher electrochemiluminescence (ECL) intensities and efficiencies than the tetraphenylethylene monomer and can be classified as highly efficient and precisely modulated intramolecular aggregation-induced electrochemiluminescence (PI-AIECL) systems. The best-performing system (SD) shows a high ECL cathodic efficiency exceeding that of the benchmark tris(2,2'-bipyridyl)ruthenium(II) chloride in aqueous solution by nearly six-fold. The electrochemical characterization of these architectures in an organic solvent provides deeper mechanistic insights, revealing that SD features the lowest electrochemical band gap. Density functional theory calculations indicate that the band gap of the guest ligand in the SD structure is the smallest and most closely matched to that of the host scaffold. Finally, the SD system is used to realize ECL-based cysteine detection (detection limit=14.4 nM) in real samples. Thus, this study not only provides a precisely modulated supramolecular strategy allowing chromophores to be controllably regulated on a molecular scale, but also inspires the programmable synthesis of high-performance aggregation-induced electrochemiluminescence emitters.

Counterion Pairing Effects on a Flavylium Heptamethine Dye

Polymethine fluorophores have facilitated the advance of biological and material sciences, due to their advantageous photophysical properties. However, the need to maintain a monomeric state can severely limit the utility and processability of dyes. High concentrations of fluorophore can lead to aggregation and negate the beneficial photophysical properties of monomers. Another concern is "crossing the cyanine limit" in which delocalization within the polymethine scaffold is broken, producing the presence of an asymmetric state diminishing its photophysical behavior. Herein, we attempt to overcome these limitations by exploring anion exchange on a cationic flavylium heptamethine scaffold. By increasing the size and hydrophobicity of the anion, we can effectively tune the degree of ion pairing within the polymethine dye. Interestingly, we found that the effect of ion pairing on photophysical properties was subtle for the flavylium heptamethine scaffold in comparison to the more commonly used indolenine cyanine dye. Utilizing larger weakly coordinating anions enabled solubility of the flavylium heptamethine fluorophore in nonpolar solvents, which could otherwise not be achieved. Even with more subtle effects than classic cyanine dyes, anion exchange on flavylium polymethine dyes holds potential for further manipulation of the properties of these low energy dyes.

Carbazole-modified thiazolo[3,2-c][1,3,5,2]oxadiazaborinines exhibiting aggregation-induced emission and mechanofluorochromism

Two highly emissive carbazole-containing thiazole-fused oxadiazaborinines were designed and synthesized. These N,O-chelated organoboron dyes displayed large Stokes shifts and remarkable solvatofluorochromism in solutions, as well as good thermal stability and comparatively high photoluminescence quantum yields (up to 34%) in the solid state. The presence of a carbazole donor unit, linked with the oxadiazaborinine acceptor via a phenyl linker, restricted intramolecular rotation, leading to enhanced aggregation-induced emission properties of the compounds: in THF/water mixtures with a large water percentage, they demonstrated the formation of emissive nanoaggregates with an average size of 79 and 89 nm for complexes 2 and 3, respectively. The introduction of bulky tert-butyl groups attached to the carbazole moiety induced significant mechanofluorochromic properties of the compounds.

Cationic Organophosphorus Chromophores: A Diamond in the Rough among Ionic Dyes

Tunable electron-accepting properties of the cationic phosphorus center, its geometry and unique preparative chemistry that allows combining this unit with diversity of π-conjugated motifs, define the appealing photophysical and electrochemical characteristics of organophosphorus ionic chromophores. This Minireview summarizes the achievements in the synthesis of the π-extended molecules functionalized with P-cationic fragments, modulation of their properties by means of structural modification, and emphasizes the important effect of cation-anion interactions, which can drastically change physical behavior of these two-component systems.

Aggregation induced emission in one easy step: pyridinium AIEgens and counter ion effect

Protonation of pyridines with a strong acid is a general and straightforward approach to achieve efficient aggregation induced emission (AIE) in structurally remarkably simple organic molecules that lack any of the conventional luminophores. The relationship between the nature of counter ion and the AIE efficiency is demonstrated. The superiority of the perchlorate counter ion is attributed to efficient stabilization of the key intermolecular π+-π interactions between neighboring luminophore molecules in the crystal lattice.

Ratiometric Nanoparticle Probe Based on FRET-Amplified Phosphorescence for Oxygen Sensing with Minimal Phototoxicity

Luminescent oxygen probes enable direct imaging of hypoxic conditions in cells and tissues, which are associated with a variety of diseases, including cancer. Here, a nanoparticle probe that addresses key challenges in the field is developed, it: i) strongly amplifies room temperature phosphorescence of encapsulated oxygen-sensitive dyes; ii) provides ratiometric response to oxygen; and iii) solves the fundamental problem of phototoxicity of phosphorescent sensors. The nanoprobe is based on 40 nm polymeric nanoparticles, encapsulating ≈2000 blue-emitting cyanine dyes with fluorinated tetraphenylborate counterions, which are as bright as 70 quantum dots (QD525). It functions as a light-harvesting nanoantenna that undergoes efficient Förster resonance energy transfer to ≈20 phosphorescent oxygen-sensitive platinum octaethylporphyrin (PtOEP) acceptor dyes. The obtained nanoprobe emits stable blue fluorescence and oxygen-sensitive red phosphorescence, providing ratiometric response to dissolved oxygen. The light harvesting leads to ≈60-fold phosphorescence amplification and makes the single nanoprobe particle as bright as ≈1200 PtOEP dyes. This high brightness enables oxygen detection at a single-particle level and in cells at ultra-low nanoprobe concentration with no sign of phototoxicity, in contrast to PtOEP dye. The developed nanoprobe is successfully applied to the imaging of a microfluidics-generated oxygen gradient in cancer cells. It constitutes a promising tool for bioimaging of hypoxia.

Bridged Stilbenes: AIEgens Designed via a Simple Strategy to Control the Non-radiative Decay Pathway

To broaden the application of aggregation-induced emission (AIE) luminogens (AIEgens), the design of novel small-molecular dyes that exhibit high fluorescence quantum yield (Φ_fl ) in the solid state is required. Considering that the mechanism of AIE can be rationalized based on steric avoidance of non-radiative decay pathways, a series of bridged stilbenes was designed, and their non-radiative decay pathways were investigated theoretically. Bridged stilbenes with short alkyl chains exhibited a strong fluorescence emission in solution and in the solid state, while bridged stilbenes with long alkyl chains exhibited AIE. Based on this theoretical prediction, we developed the bridged stilbenes BPST[7] and DPB[7], which demonstrate excellent AIE behavior.

Configuration-Controllable Polymeric Nanovehicles Self-Assembled in Pixel Grids under an Electric Field

Polymeric nanovehicles have been widely applied in many fields, but during the process of preparation, it is still hard to reach the balance between precise structure control and mass production. In the present work, using industrial pixel grids as the macroscopic template, we applied dual effects of confinement and dielectric difference to speed up the self-assembly of polymeric nanovehicles, even to regulate the generated mesostructures and cargo loading. Within 2 min, a poly(ethylene glycol)-block-poly(d,l-lactide acid) (PEG-b-PDLLA) amphiphilic block copolymer layer was rapidly pushed off and broken down into uniform nanoparticles at 40 V. Hereinto, increasing volume of the outer aqueous phase in pixel grids favored the architectonic transformation of the generated nanovehicles from solid micelles with a diameter of 95 nm to hollow vesicles with a diameter of 232 nm. In particular, all the elements from the confinement cells to the preparation process can be completed via wet printing. Electric-field-induced pixel template technology is facile, cheap, controllable, and recyclable, and it is anticipated to promote continuous and bulk production of polymeric nanovehicles.

Fabricating a fluorescence resonance energy transfer system with AIE molecular for sensitive detection of Cu(II) ions

The aggregation-induced emission (AIE) luminogens has exhibited strong potential in fabricating the fluorescence resonance energy transfer (FRET) system. In this paper one efficient FRET system was fabricated in aqueous solution based on an AIE molecular (T) and Nile Red (NiR) dyes: T acts as the energy donor and NiR acts as the energy acceptor with a ratio of 250:1. The energy-transfer efficiency from the donor to acceptor is 82.52%, and the antenna effect is 24.9. Base on this data, a very low detection limit for Cu²⁺ was calculated to be 35.5 pM. This method displays penitential application on fluorescence probe for small ions or molecular detection by light-harvesting system based on a simple AIE donor under physiological conditions.