Self-template synthesis of defect-rich NiO nanotubes as efficient electrocatalysts for methanol oxidation reaction

The influence of crystal facet on the catalytic performance of MOFs-derived NiO with different morphologies for the total oxidation of propane: The defect engineering dominated by solvent regulation effect

Crystal facet and defect engineering are crucial for designing heterogeneous catalysts. In this study, different solvents were utilized to generate NiO with distinct shapes (hexagonal layers, rods, and spheres) using nickel-based metal-organic frameworks (MOFs) as precursors. It was shown that the exposed crystal facets of NiO with different morphologies differed from each other. Various characterization techniques and density functional theory (DFT) calculations revealed that hexagonal-layered NiO (NiO-L) possessed excellent low-temperature reducibility and oxygen migration ability. The (111) crystal plane of NiO-L contained more lattice defects and oxygen vacancies, resulting in enhanced propane oxidation due to its highest O2 adsorption energy. Furthermore, the higher the surface active oxygen species and surface oxygen vacancy concentrations, the lower the C-H activation energy of the NiO catalyst and hence the better the catalytic activity for the oxidation of propane. Consequently, NiO-L exhibited remarkable catalytic activity and good stability for propane oxidation. This study provided a simple strategy for controlling NiO crystal facets, and demonstrated that the oxygen defects could be more easily formed on NiO(111) facets, thus would be beneficial for the activation of C-H bonds in propane. In addition, the results of this work can be extended to the other fields, such as propane oxidation to propene, fuel cells, and photocatalysis.

Enhanced Hydroxyl Adsorption in Ultrathin NiO/Cr2 O3 In-Plane Heterostructures for Efficient Alkaline Methanol Oxidation Reaction

The exploration of advanced nickel-based electrocatalysts for alkaline methanol oxidation reaction (MOR) holds immense promise for value-added organic products coupled with hydrogen production, but still remain challenging. Herein, we construct ultrathin NiO/Cr2 O3 in-plane heterostructures to promote the alkaline MOR process. Experimental and theoretical studies reveal that NiO/Cr2 O3 in-plane heterostructures enable a favorable upshift of the d-band center and enhanced adsorption of hydroxyl species, leading to accelerated generation of active NiO(OH)ads species. Furthermore, ultrathin in-plane heterostructures endow the catalyst with good charge transfer ability and adsorption behavior of methanol molecules onto catalytic sites, contributing to the improvement of alkaline MOR kinetics. As a result, ultrathin NiO/Cr2 O3 in-plane heterostructures exhibit a remarkable MOR activity with a high current density of 221 mA cm-2 at 0.6 V vs Ag/AgCl, which is 7.1-fold larger than that of pure NiO nanosheets and comparable with other highly active catalysts reported so far. This work provides an effectual strategy to optimize the activity of nickel-based catalysts and highlights the dominate efficacy of ultrathin in-plane heterostructures in alkaline MOR.

Interfacial engineering of nickel selenide with CeO2 on N-doped carbon nanosheets for efficient methanol and urea electro-oxidation

The design of low cost, high efficiency electrocatalysts for methanol oxidation reactions (MOR) and urea oxidation reactions (UOR) is a pressing need to address the energy crisis and water pollution. In the present work, we developed Cerium dioxide (CeO2) and nickel selenide (Ni0.85Se) nanoparticles integrated into three-dimensional N-doped carbon nanosheets to be used as efficient and stable bifunctional electrocatalysts for MOR and UOR. By optimizing the selenization temperature, the CeO2-modified Ni0.85Se obtained at selenization temperature of 550 °C (CeO2-Ni0.85Se-550-NC) has the best MOR and UOR electrochemical performance. The CeO2-Ni0.85Se-550-NC potential only requires 1.309 V (MOR) and 1.294 V (UOR) to reach 10 mA cm-2, respectively. The DFT study reveals that CeO2-Ni0.85Se-550-NC has the best reaction path with the synergistic effect between CeO2 and Ni0.85Se. The outstanding catalytic performance of CeO2-Ni0.85Se-550-NC may be due to the cointeraction between CeO2 and Ni0.85Se, allowing more defects that function as catalytic sites while promoting fast electron transfer in the N-doped carbon substrate.

Honeycomb-like nickel oxide-reduced graphene oxide based sensor for the electrochemical tracking of norepinephrine in neuronal cells

Highly sensitive and specific detection and monitoring of trace norepinephrine (NE) in biological fluids and neuronal cell lines is essential for the investigation of pathogenesis of certain neurological diseases. Herein, we constructed a novel electrochemical sensor for real-time monitoring of NE released by PC12 cells based on glassy carbon electrode (GCE) modified with honeycomb-like nickel oxide (NiO)-reduced graphene oxide (RGO) nanocomposite. The synthesized NiO, RGO and the NiO-RGO nanocomposite were characterized using X-ray diffraction spectrogram (XRD), Raman spectroscopy and scanning electron microscopy (SEM). The porous three-dimensional honeycomb-like structure of NiO and high charge transfer kinetics of RGO endowed the nanocomposite with excellent electrocatalytic activity, large surface area and good conductivity. The developed sensor exhibited superior sensitivity and specificity towards NE in a wide linear range from 20 nM to 14 μM and 14 μM-80 μM, with a low detection limit of 5 nM. The performances of the sensor in terms of excellent biocompatibility and high sensitivity allow it to be successfully employed in the tracking of NE release from PC12 cells under the stimulation of K⁺, providing an effective strategy for the real-time monitoring of cellular NE.

Bacterial nanocellulose as green support of platinum nanoparticles for effective methanol oxidation

Bacterial nanocellulose, BNC, has emerged as a new class of nanomaterials recognized as renewable, biodegradable, biocompatible and material for versatile applications. BNC also proved as a perfect support matrix for metallic nanoparticle synthesis and appeared as suitable alternative for widely used carbon based materials. Following the idea to replace commonly used carbon based materials for platinum supports with the green and sustainable one, BNC appeared as an excellent candidate. Herein, microwave assisted synthesis has been reported for the first time for platinum nanoparticles supported on BNC as green material. Bacterial nanocelullose-platinum catalyst, Pt/BNC, was investigated by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), X-ray diffractometry (XRD) and transmission-electron microscopy (TEM) analysis. The obtained results confirmed successful synthesis of new Pt-based catalyst. It was found that Pt/BNC catalyst has high electrocatalytic performance in methanol oxidation reaction. Green/sustainable catalytic system is highly desirable and provided by the elegant microwave assisted synthesis of Pt/BNC will pave the way for a larger scale application and expedite the market penetration of such fuel cells.

A three-dimensional flower-like Mn–Ni–Co–O microstructure as a high-performance electrocatalyst for the methanol oxidation reaction

A Mn–Ni–Co–O ternary metal oxide with a unique 3D microstructure shows high electrocatalytic activity and stability towards methanol electrooxidation.

In Situ Synthesis of Surface-Mounted Novel Nickel(II) Trimer-Based MOF on Nickel Oxide Hydroxide Heterostructures for Enhanced Methanol Electro-Oxidation

Engineering the heterogeneous interface fusing MOFs and inorganic active component is an effective strategy to improve the electrochemical performance. Herein, we report a new Ni₃-based MOF (denoted as CTGU-24) with an infrequent two-fold interpenetrating 3D (3,8)-connected network constructed from Ni(II) trimer and mixed tripodal tectonics for the electrocatalytic methanol oxidation reaction (MOR). In order to improve its stability and activities, the heterogeneous hybrid CTGU-24@NiOOH has been fabricated successfully via the first preparation of the NiOOH nanosphere and then in situ formation of CTGU-24 decorated on the NiOOH surface. Moreover, the integration of CTGU-24@NiOOH and different additives [acetylene black (AB) and ketjen black (KB)], resulting in the optimized hybrid sample AB&CTGU-24@NiOOH (4:4). It attains better MOR performance with an area-specific peak current density of 34.53 mA·cm⁻² than pure CTGU-24 (14.99 mA·cm⁻²) and improved durability in an alkali medium. The new findings indicate that the CTGU-24@NiOOH heterostructure formed in situ and the integration of moderate additives are critical to optimizing and improving electrocatalytic activity of pure MOF crystalline material.

One-dimensional cobalt oxide nanotubes with rich defect for oxygen evolution reaction

For the electrochemcial hydrogen production, the oxygen evolution reaction (OER) is a pivotal half-reaction in water splitting. However, OER suffers sluggish kinetics and high overpotential, leading to the increase of overall energy consumption and decrease of the energy efficiency. In this work, high-quality cobalt oxide porous nanotubes (Co₃O₄-PNTs) are easily obtained by simple self-template approach. One-dimensional (1D) porous structure provides the large specific surface area, enough abundant active atoms and effective mass transfer. In addition, Co₃O₄-PNTs also own self-stability of 1D architecture, benefitting the their durability for electrocatalytic reaction. Thus, Co₃O₄-PNTs with optimal annealing temperature and time reveal the attractive alkaline OER performance (Tafel slope of 56 mV dec^-1and 323 mV overpotential at 10 mA cm^-2), which outperform the Co₃O₄nanoparticles and benchmark commercial RuO₂nanoparticles. Furthermore, Co₃O₄-PNTs also exhibit excellent OER durability for least 10 h at the 10 mA cm^-2. Overall, Co₃O₄-PNTs with low cost can be serve as a highly reactive and economical catalyst for OER.

Holey platinum nanotubes for ethanol electrochemical reforming in aqueous solution

The catalytic/electrocatalytic performance of platinum (Pt) nanostructures highly relates to their morphology. Herein, we propose a facile self-template pyrolysis strategy at high temperature to synthesize one-dimensionally holey Pt nanotubes (Pt-hNTs) using Pt^II-dimethylglyoxime complex (Pt^II-DMG) nanorods as the reaction precursor. The coordination capability of DMG results in the generation of Pt^II-DMG nanorods, whereas the reducibility of DMG at high temperature leads to the reduction of Pt^II species in Pt^II-DMG nanorods. During the reaction process, the inside-out Ostwald ripening phenomenon leads to the hollow morphology of Pt-hNTs. Benefiting from the physical characteristics of hollow and holey structure, Pt-hNTs with clean surface show superior electroactivity and durability for catalyzing ethanol electrooxidation as well as hydrogen evolution reaction in alkaline media. Under optimized experimental conditions, the constructed symmetric Pt-hNTs||Pt-hNTs ethanol electrolyzer only requires an electrolysis voltage of 0.40 V to achieve the electrochemical hydrogen production, demonstrating a highly energy saving strategy relative to traditional water electrolysis.

Size-controllable carbon spheres doped Ni (II) for enhancing the catalytic oxidation of methanol

Ni(II)/CSs were prepared using a simple two-step hydrothermal method. The morphology and composition of the catalysts were studied with scanning electron microscope, transmission electron microscope, and X-ray diffraction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the surface of the prepared carbon spheres was rich in hydroxyl groups, which was beneficial to remove CO intermediates, and therefore, improving the catalytic efficiency and the antipoisoning ability of the catalysts. The results of cyclic voltammetry and chronoamperometry showed that the electrocatalytic activity and stability of Ni(II)/CSs were higher than that of unloaded NiAc under alkaline environment. When the nickel content was 5 wt.%, the peak oxidation current density of methanol on Ni(II)/CSs electrocatalyst reached the maximum of 34.54 mA/cm2, which was about 1.8 times that of unloaded NiAc. These results indicate that Ni(II)/CSs has potential applications in the electrocatalytic oxidation of methanol.

Nickel Iron Diselenide for Highly Efficient and Selective Electrocatalytic Conversion of Methanol to Formate

The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni_{1- x} Fe_x Se₂ nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, Ni_0.75 Fe_0.25 Se₂ , this diselenide is able to produce 0.47 mmol cm^-2  h^-1 of formate at 50 mA cm^-2 with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm^-2 and 2.2 A mg^-1 in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.

Convenient synthesis of polymetallic metal–organic gels for efficient methanol electro-oxidation

Novel Ni-based AlNiCu-MOG and AB&AlNiCu-MOG composite materials were successfully fabricated, which exhibited superior MOR activities with a current density of 17.1 and 33.24 mA cm⁻², respectively.

Nickel nanocrystal/nitrogen-doped carbon composites as efficient and carbon monoxide-resistant electrocatalysts for methanol oxidation reactions

High-performance electrocatalysts for the methanol oxidation reaction (MOR) are the key to advance the application of direct methanol fuel cells. Pt-Based electrocatalysts for the MOR are limited due to their high cost, low stability and poor resistance to carbon monoxide (CO) poisoning. The development of non-noble metal-based electrocatalysts for the MOR with high activity and good stability is desired, but it remains a challenge. Herein, we report a simple strategy to prepare nickel nanocrystals embedded in a nitrogen-doped carbon matrix (Ni/N-C composite) by pyrolysis of Ni-coordinated polyaniline-poly(vinyl alcohol) hydrogels. These in situ generated Ni nanocrystals serve as active electrocatalysts for the MOR, while the nitrogen-doped carbon matrix serves as a conductive support to facilitate electron transfer and also to protect the active Ni nanocrystals. The optimal Ni/N-C@500 electrocatalyst shows a high MOR activity of 147 mA cm-2 at 1.66 V vs. the RHE in alkaline methanol solution, which is outstanding among Ni-based MOR electrocatalysts. Ni/N-C@500 also shows better stability than the Pt/C catalyst in the long-term MOR test at high current densities. Upon CO poisoning, Ni/N-C@500 retains 85% of its MOR activity, far exceeding the performance of the Pt/C catalyst (61% retention). Owing to its facile synthesis, outstanding activity and high stability, the Ni/N-C@500 composite is promising as a low-cost, efficient and CO-resistant electrocatalyst for the MOR.

Anodic hydrazine electrooxidation boosted overall water electrolysis by bifunctional porous nickel phosphide nanotubes on nickel foam

Water electrolysis is an environmentally friendly and sustainable technique for ultra-pure hydrogen production, while expensive electrode materials and high driving voltage have seriously hindered its commercialization process. Here, Earth-abundant bifunctional porous Ni2P hollow nanotubes on nickel foam (Ni2P-HNTs/NF) electrocatalysts are synthesized through a facile self-template method and a phosphating process, which are perfectly combined with the hydrazine electrooxidation reaction (HzOR) boosted water electrolysis. Benefiting from the unique structural characteristic of open-framework and abundant step atoms, Ni2P-HNTs/NF achieves 10 mA cm-2 at 91 mV (vs. RHE) for the cathodic hydrogen evolution reaction and 18 mV (vs. RHE) for the anodic HzOR in a three electrode system, respectively. The corresponding two-electrode hydrazine electrolyzer produces 10 mA cm-2 with a total voltage of only 152 mV for ultra-pure hydrogen production, highlighting a cost-effective and energy-saving water electrolysis mode.

The one-pot synthesis of CuNi nanoparticles with a Ni-rich surface for the electrocatalytic methanol oxidation reaction

The use of fuel cells is one of the most promising renewable energy strategies, but they still suffer from many limitations. The high mass enthalpy of hydrogen as a fuel comes at the cost of inconveniences and risks associated with storage, transportation and utilization, while the high performance of Pt catalysts in commercial fuel cells is limited by their high cost, low earth abundance, and poor stability as a result of CO intermediate poisoning. To circumvent these dilemmas, direct methanol fuel cells (DMFCs) were developed, using methanol as a fuel and Ni as the anode catalyst. Thanks to the condensed form of the fuel, DMFCs are considered as the most promising fuel-cell solution for portable electronic devices. Usually, other elements have to be introduced into Ni-based catalysts to modify the active sites to provide better alternatives to pristine Ni metal in terms of activity and stability. In this study, we provide a mild synthetic method for the preparation of CuNi alloy nanoparticles. The proper alloying ratio leads to the suitable modification of the electronic structure of Ni, which promotes the MOR catalytic reaction on the NiCu alloy. The NiCu alloy catalyst exhibits a mass current density of 1028 mA mg_metal^-1 for the MOR at 1.55 V (vs. RHE), which is among the best values obtained from similarly prepared Ni-based catalysts.